blob: 3a6824f12be2f8dc6c17e0862e49b74de786ebfd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/synclink.c
3 *
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08004 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -07005 *
6 * Device driver for Microgate SyncLink ISA and PCI
7 * high speed multiprotocol serial adapters.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
15 *
16 * Original release 01/11/99
17 *
18 * This code is released under the GNU General Public License (GPL)
19 *
20 * This driver is primarily intended for use in synchronous
21 * HDLC mode. Asynchronous mode is also provided.
22 *
23 * When operating in synchronous mode, each call to mgsl_write()
24 * contains exactly one complete HDLC frame. Calling mgsl_put_char
25 * will start assembling an HDLC frame that will not be sent until
26 * mgsl_flush_chars or mgsl_write is called.
27 *
28 * Synchronous receive data is reported as complete frames. To accomplish
29 * this, the TTY flip buffer is bypassed (too small to hold largest
30 * frame and may fragment frames) and the line discipline
31 * receive entry point is called directly.
32 *
33 * This driver has been tested with a slightly modified ppp.c driver
34 * for synchronous PPP.
35 *
36 * 2000/02/16
37 * Added interface for syncppp.c driver (an alternate synchronous PPP
38 * implementation that also supports Cisco HDLC). Each device instance
39 * registers as a tty device AND a network device (if dosyncppp option
40 * is set for the device). The functionality is determined by which
41 * device interface is opened.
42 *
43 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
44 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
46 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
47 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
48 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
49 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
51 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
53 * OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#if defined(__i386__)
57# define BREAKPOINT() asm(" int $3");
58#else
59# define BREAKPOINT() { }
60#endif
61
62#define MAX_ISA_DEVICES 10
63#define MAX_PCI_DEVICES 10
64#define MAX_TOTAL_DEVICES 20
65
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#include <linux/module.h>
67#include <linux/errno.h>
68#include <linux/signal.h>
69#include <linux/sched.h>
70#include <linux/timer.h>
71#include <linux/interrupt.h>
72#include <linux/pci.h>
73#include <linux/tty.h>
74#include <linux/tty_flip.h>
75#include <linux/serial.h>
76#include <linux/major.h>
77#include <linux/string.h>
78#include <linux/fcntl.h>
79#include <linux/ptrace.h>
80#include <linux/ioport.h>
81#include <linux/mm.h>
Alexey Dobriyand3378292009-03-31 15:19:18 -070082#include <linux/seq_file.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070083#include <linux/slab.h>
84#include <linux/delay.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070085#include <linux/netdevice.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070086#include <linux/vmalloc.h>
87#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070088#include <linux/ioctl.h>
Robert P. J. Day3dd12472008-02-06 01:37:17 -080089#include <linux/synclink.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070090
91#include <asm/system.h>
92#include <asm/io.h>
93#include <asm/irq.h>
94#include <asm/dma.h>
95#include <linux/bitops.h>
96#include <asm/types.h>
97#include <linux/termios.h>
98#include <linux/workqueue.h>
99#include <linux/hdlc.h>
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800100#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800102#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
103#define SYNCLINK_GENERIC_HDLC 1
104#else
105#define SYNCLINK_GENERIC_HDLC 0
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106#endif
107
108#define GET_USER(error,value,addr) error = get_user(value,addr)
109#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
110#define PUT_USER(error,value,addr) error = put_user(value,addr)
111#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
112
113#include <asm/uaccess.h>
114
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115#define RCLRVALUE 0xffff
116
117static MGSL_PARAMS default_params = {
118 MGSL_MODE_HDLC, /* unsigned long mode */
119 0, /* unsigned char loopback; */
120 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
121 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
122 0, /* unsigned long clock_speed; */
123 0xff, /* unsigned char addr_filter; */
124 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
125 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
126 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
127 9600, /* unsigned long data_rate; */
128 8, /* unsigned char data_bits; */
129 1, /* unsigned char stop_bits; */
130 ASYNC_PARITY_NONE /* unsigned char parity; */
131};
132
133#define SHARED_MEM_ADDRESS_SIZE 0x40000
Paul Fulghum623a4392006-10-17 00:09:27 -0700134#define BUFFERLISTSIZE 4096
135#define DMABUFFERSIZE 4096
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136#define MAXRXFRAMES 7
137
138typedef struct _DMABUFFERENTRY
139{
140 u32 phys_addr; /* 32-bit flat physical address of data buffer */
Paul Fulghum4a918bc2005-09-09 13:02:12 -0700141 volatile u16 count; /* buffer size/data count */
142 volatile u16 status; /* Control/status field */
143 volatile u16 rcc; /* character count field */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144 u16 reserved; /* padding required by 16C32 */
145 u32 link; /* 32-bit flat link to next buffer entry */
146 char *virt_addr; /* virtual address of data buffer */
147 u32 phys_entry; /* physical address of this buffer entry */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800148 dma_addr_t dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149} DMABUFFERENTRY, *DMAPBUFFERENTRY;
150
151/* The queue of BH actions to be performed */
152
153#define BH_RECEIVE 1
154#define BH_TRANSMIT 2
155#define BH_STATUS 4
156
157#define IO_PIN_SHUTDOWN_LIMIT 100
158
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159struct _input_signal_events {
160 int ri_up;
161 int ri_down;
162 int dsr_up;
163 int dsr_down;
164 int dcd_up;
165 int dcd_down;
166 int cts_up;
167 int cts_down;
168};
169
170/* transmit holding buffer definitions*/
171#define MAX_TX_HOLDING_BUFFERS 5
172struct tx_holding_buffer {
173 int buffer_size;
174 unsigned char * buffer;
175};
176
177
178/*
179 * Device instance data structure
180 */
181
182struct mgsl_struct {
183 int magic;
Alan Cox8fb06c72008-07-16 21:56:46 +0100184 struct tty_port port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185 int line;
186 int hw_version;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187
188 struct mgsl_icount icount;
189
Linus Torvalds1da177e2005-04-16 15:20:36 -0700190 int timeout;
191 int x_char; /* xon/xoff character */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192 u16 read_status_mask;
193 u16 ignore_status_mask;
194 unsigned char *xmit_buf;
195 int xmit_head;
196 int xmit_tail;
197 int xmit_cnt;
198
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199 wait_queue_head_t status_event_wait_q;
200 wait_queue_head_t event_wait_q;
201 struct timer_list tx_timer; /* HDLC transmit timeout timer */
202 struct mgsl_struct *next_device; /* device list link */
203
204 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
205 struct work_struct task; /* task structure for scheduling bh */
206
207 u32 EventMask; /* event trigger mask */
208 u32 RecordedEvents; /* pending events */
209
210 u32 max_frame_size; /* as set by device config */
211
212 u32 pending_bh;
213
Joe Perches0fab6de2008-04-28 02:14:02 -0700214 bool bh_running; /* Protection from multiple */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215 int isr_overflow;
Joe Perches0fab6de2008-04-28 02:14:02 -0700216 bool bh_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217
218 int dcd_chkcount; /* check counts to prevent */
219 int cts_chkcount; /* too many IRQs if a signal */
220 int dsr_chkcount; /* is floating */
221 int ri_chkcount;
222
223 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800224 u32 buffer_list_phys;
225 dma_addr_t buffer_list_dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700226
227 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
228 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
229 unsigned int current_rx_buffer;
230
231 int num_tx_dma_buffers; /* number of tx dma frames required */
232 int tx_dma_buffers_used;
233 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
234 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
235 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
236 int current_tx_buffer; /* next tx dma buffer to be loaded */
237
238 unsigned char *intermediate_rxbuffer;
239
240 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
241 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
242 int put_tx_holding_index; /* next tx holding buffer to store user request */
243 int tx_holding_count; /* number of tx holding buffers waiting */
244 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
245
Joe Perches0fab6de2008-04-28 02:14:02 -0700246 bool rx_enabled;
247 bool rx_overflow;
248 bool rx_rcc_underrun;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700249
Joe Perches0fab6de2008-04-28 02:14:02 -0700250 bool tx_enabled;
251 bool tx_active;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 u32 idle_mode;
253
254 u16 cmr_value;
255 u16 tcsr_value;
256
257 char device_name[25]; /* device instance name */
258
259 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
260 unsigned char bus; /* expansion bus number (zero based) */
261 unsigned char function; /* PCI device number */
262
263 unsigned int io_base; /* base I/O address of adapter */
264 unsigned int io_addr_size; /* size of the I/O address range */
Joe Perches0fab6de2008-04-28 02:14:02 -0700265 bool io_addr_requested; /* true if I/O address requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266
267 unsigned int irq_level; /* interrupt level */
268 unsigned long irq_flags;
Joe Perches0fab6de2008-04-28 02:14:02 -0700269 bool irq_requested; /* true if IRQ requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270
271 unsigned int dma_level; /* DMA channel */
Joe Perches0fab6de2008-04-28 02:14:02 -0700272 bool dma_requested; /* true if dma channel requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273
274 u16 mbre_bit;
275 u16 loopback_bits;
276 u16 usc_idle_mode;
277
278 MGSL_PARAMS params; /* communications parameters */
279
280 unsigned char serial_signals; /* current serial signal states */
281
Joe Perches0fab6de2008-04-28 02:14:02 -0700282 bool irq_occurred; /* for diagnostics use */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283 unsigned int init_error; /* Initialization startup error (DIAGS) */
284 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
285
286 u32 last_mem_alloc;
287 unsigned char* memory_base; /* shared memory address (PCI only) */
288 u32 phys_memory_base;
Joe Perches0fab6de2008-04-28 02:14:02 -0700289 bool shared_mem_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700290
291 unsigned char* lcr_base; /* local config registers (PCI only) */
292 u32 phys_lcr_base;
293 u32 lcr_offset;
Joe Perches0fab6de2008-04-28 02:14:02 -0700294 bool lcr_mem_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295
296 u32 misc_ctrl_value;
297 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
298 char char_buf[MAX_ASYNC_BUFFER_SIZE];
Joe Perches0fab6de2008-04-28 02:14:02 -0700299 bool drop_rts_on_tx_done;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300
Joe Perches0fab6de2008-04-28 02:14:02 -0700301 bool loopmode_insert_requested;
302 bool loopmode_send_done_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303
304 struct _input_signal_events input_signal_events;
305
306 /* generic HDLC device parts */
307 int netcount;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 spinlock_t netlock;
309
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800310#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 struct net_device *netdev;
312#endif
313};
314
315#define MGSL_MAGIC 0x5401
316
317/*
318 * The size of the serial xmit buffer is 1 page, or 4096 bytes
319 */
320#ifndef SERIAL_XMIT_SIZE
321#define SERIAL_XMIT_SIZE 4096
322#endif
323
324/*
325 * These macros define the offsets used in calculating the
326 * I/O address of the specified USC registers.
327 */
328
329
330#define DCPIN 2 /* Bit 1 of I/O address */
331#define SDPIN 4 /* Bit 2 of I/O address */
332
333#define DCAR 0 /* DMA command/address register */
334#define CCAR SDPIN /* channel command/address register */
335#define DATAREG DCPIN + SDPIN /* serial data register */
336#define MSBONLY 0x41
337#define LSBONLY 0x40
338
339/*
340 * These macros define the register address (ordinal number)
341 * used for writing address/value pairs to the USC.
342 */
343
344#define CMR 0x02 /* Channel mode Register */
345#define CCSR 0x04 /* Channel Command/status Register */
346#define CCR 0x06 /* Channel Control Register */
347#define PSR 0x08 /* Port status Register */
348#define PCR 0x0a /* Port Control Register */
349#define TMDR 0x0c /* Test mode Data Register */
350#define TMCR 0x0e /* Test mode Control Register */
351#define CMCR 0x10 /* Clock mode Control Register */
352#define HCR 0x12 /* Hardware Configuration Register */
353#define IVR 0x14 /* Interrupt Vector Register */
354#define IOCR 0x16 /* Input/Output Control Register */
355#define ICR 0x18 /* Interrupt Control Register */
356#define DCCR 0x1a /* Daisy Chain Control Register */
357#define MISR 0x1c /* Misc Interrupt status Register */
358#define SICR 0x1e /* status Interrupt Control Register */
359#define RDR 0x20 /* Receive Data Register */
360#define RMR 0x22 /* Receive mode Register */
361#define RCSR 0x24 /* Receive Command/status Register */
362#define RICR 0x26 /* Receive Interrupt Control Register */
363#define RSR 0x28 /* Receive Sync Register */
364#define RCLR 0x2a /* Receive count Limit Register */
365#define RCCR 0x2c /* Receive Character count Register */
366#define TC0R 0x2e /* Time Constant 0 Register */
367#define TDR 0x30 /* Transmit Data Register */
368#define TMR 0x32 /* Transmit mode Register */
369#define TCSR 0x34 /* Transmit Command/status Register */
370#define TICR 0x36 /* Transmit Interrupt Control Register */
371#define TSR 0x38 /* Transmit Sync Register */
372#define TCLR 0x3a /* Transmit count Limit Register */
373#define TCCR 0x3c /* Transmit Character count Register */
374#define TC1R 0x3e /* Time Constant 1 Register */
375
376
377/*
378 * MACRO DEFINITIONS FOR DMA REGISTERS
379 */
380
381#define DCR 0x06 /* DMA Control Register (shared) */
382#define DACR 0x08 /* DMA Array count Register (shared) */
383#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
384#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
385#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
386#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
387#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
388
389#define TDMR 0x02 /* Transmit DMA mode Register */
390#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
391#define TBCR 0x2a /* Transmit Byte count Register */
392#define TARL 0x2c /* Transmit Address Register (low) */
393#define TARU 0x2e /* Transmit Address Register (high) */
394#define NTBCR 0x3a /* Next Transmit Byte count Register */
395#define NTARL 0x3c /* Next Transmit Address Register (low) */
396#define NTARU 0x3e /* Next Transmit Address Register (high) */
397
398#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
399#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
400#define RBCR 0xaa /* Receive Byte count Register */
401#define RARL 0xac /* Receive Address Register (low) */
402#define RARU 0xae /* Receive Address Register (high) */
403#define NRBCR 0xba /* Next Receive Byte count Register */
404#define NRARL 0xbc /* Next Receive Address Register (low) */
405#define NRARU 0xbe /* Next Receive Address Register (high) */
406
407
408/*
409 * MACRO DEFINITIONS FOR MODEM STATUS BITS
410 */
411
412#define MODEMSTATUS_DTR 0x80
413#define MODEMSTATUS_DSR 0x40
414#define MODEMSTATUS_RTS 0x20
415#define MODEMSTATUS_CTS 0x10
416#define MODEMSTATUS_RI 0x04
417#define MODEMSTATUS_DCD 0x01
418
419
420/*
421 * Channel Command/Address Register (CCAR) Command Codes
422 */
423
424#define RTCmd_Null 0x0000
425#define RTCmd_ResetHighestIus 0x1000
426#define RTCmd_TriggerChannelLoadDma 0x2000
427#define RTCmd_TriggerRxDma 0x2800
428#define RTCmd_TriggerTxDma 0x3000
429#define RTCmd_TriggerRxAndTxDma 0x3800
430#define RTCmd_PurgeRxFifo 0x4800
431#define RTCmd_PurgeTxFifo 0x5000
432#define RTCmd_PurgeRxAndTxFifo 0x5800
433#define RTCmd_LoadRcc 0x6800
434#define RTCmd_LoadTcc 0x7000
435#define RTCmd_LoadRccAndTcc 0x7800
436#define RTCmd_LoadTC0 0x8800
437#define RTCmd_LoadTC1 0x9000
438#define RTCmd_LoadTC0AndTC1 0x9800
439#define RTCmd_SerialDataLSBFirst 0xa000
440#define RTCmd_SerialDataMSBFirst 0xa800
441#define RTCmd_SelectBigEndian 0xb000
442#define RTCmd_SelectLittleEndian 0xb800
443
444
445/*
446 * DMA Command/Address Register (DCAR) Command Codes
447 */
448
449#define DmaCmd_Null 0x0000
450#define DmaCmd_ResetTxChannel 0x1000
451#define DmaCmd_ResetRxChannel 0x1200
452#define DmaCmd_StartTxChannel 0x2000
453#define DmaCmd_StartRxChannel 0x2200
454#define DmaCmd_ContinueTxChannel 0x3000
455#define DmaCmd_ContinueRxChannel 0x3200
456#define DmaCmd_PauseTxChannel 0x4000
457#define DmaCmd_PauseRxChannel 0x4200
458#define DmaCmd_AbortTxChannel 0x5000
459#define DmaCmd_AbortRxChannel 0x5200
460#define DmaCmd_InitTxChannel 0x7000
461#define DmaCmd_InitRxChannel 0x7200
462#define DmaCmd_ResetHighestDmaIus 0x8000
463#define DmaCmd_ResetAllChannels 0x9000
464#define DmaCmd_StartAllChannels 0xa000
465#define DmaCmd_ContinueAllChannels 0xb000
466#define DmaCmd_PauseAllChannels 0xc000
467#define DmaCmd_AbortAllChannels 0xd000
468#define DmaCmd_InitAllChannels 0xf000
469
470#define TCmd_Null 0x0000
471#define TCmd_ClearTxCRC 0x2000
472#define TCmd_SelectTicrTtsaData 0x4000
473#define TCmd_SelectTicrTxFifostatus 0x5000
474#define TCmd_SelectTicrIntLevel 0x6000
475#define TCmd_SelectTicrdma_level 0x7000
476#define TCmd_SendFrame 0x8000
477#define TCmd_SendAbort 0x9000
478#define TCmd_EnableDleInsertion 0xc000
479#define TCmd_DisableDleInsertion 0xd000
480#define TCmd_ClearEofEom 0xe000
481#define TCmd_SetEofEom 0xf000
482
483#define RCmd_Null 0x0000
484#define RCmd_ClearRxCRC 0x2000
485#define RCmd_EnterHuntmode 0x3000
486#define RCmd_SelectRicrRtsaData 0x4000
487#define RCmd_SelectRicrRxFifostatus 0x5000
488#define RCmd_SelectRicrIntLevel 0x6000
489#define RCmd_SelectRicrdma_level 0x7000
490
491/*
492 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
493 */
494
495#define RECEIVE_STATUS BIT5
496#define RECEIVE_DATA BIT4
497#define TRANSMIT_STATUS BIT3
498#define TRANSMIT_DATA BIT2
499#define IO_PIN BIT1
500#define MISC BIT0
501
502
503/*
504 * Receive status Bits in Receive Command/status Register RCSR
505 */
506
507#define RXSTATUS_SHORT_FRAME BIT8
508#define RXSTATUS_CODE_VIOLATION BIT8
509#define RXSTATUS_EXITED_HUNT BIT7
510#define RXSTATUS_IDLE_RECEIVED BIT6
511#define RXSTATUS_BREAK_RECEIVED BIT5
512#define RXSTATUS_ABORT_RECEIVED BIT5
513#define RXSTATUS_RXBOUND BIT4
514#define RXSTATUS_CRC_ERROR BIT3
515#define RXSTATUS_FRAMING_ERROR BIT3
516#define RXSTATUS_ABORT BIT2
517#define RXSTATUS_PARITY_ERROR BIT2
518#define RXSTATUS_OVERRUN BIT1
519#define RXSTATUS_DATA_AVAILABLE BIT0
520#define RXSTATUS_ALL 0x01f6
521#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
522
523/*
524 * Values for setting transmit idle mode in
525 * Transmit Control/status Register (TCSR)
526 */
527#define IDLEMODE_FLAGS 0x0000
528#define IDLEMODE_ALT_ONE_ZERO 0x0100
529#define IDLEMODE_ZERO 0x0200
530#define IDLEMODE_ONE 0x0300
531#define IDLEMODE_ALT_MARK_SPACE 0x0500
532#define IDLEMODE_SPACE 0x0600
533#define IDLEMODE_MARK 0x0700
534#define IDLEMODE_MASK 0x0700
535
536/*
537 * IUSC revision identifiers
538 */
539#define IUSC_SL1660 0x4d44
540#define IUSC_PRE_SL1660 0x4553
541
542/*
543 * Transmit status Bits in Transmit Command/status Register (TCSR)
544 */
545
546#define TCSR_PRESERVE 0x0F00
547
548#define TCSR_UNDERWAIT BIT11
549#define TXSTATUS_PREAMBLE_SENT BIT7
550#define TXSTATUS_IDLE_SENT BIT6
551#define TXSTATUS_ABORT_SENT BIT5
552#define TXSTATUS_EOF_SENT BIT4
553#define TXSTATUS_EOM_SENT BIT4
554#define TXSTATUS_CRC_SENT BIT3
555#define TXSTATUS_ALL_SENT BIT2
556#define TXSTATUS_UNDERRUN BIT1
557#define TXSTATUS_FIFO_EMPTY BIT0
558#define TXSTATUS_ALL 0x00fa
559#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
560
561
562#define MISCSTATUS_RXC_LATCHED BIT15
563#define MISCSTATUS_RXC BIT14
564#define MISCSTATUS_TXC_LATCHED BIT13
565#define MISCSTATUS_TXC BIT12
566#define MISCSTATUS_RI_LATCHED BIT11
567#define MISCSTATUS_RI BIT10
568#define MISCSTATUS_DSR_LATCHED BIT9
569#define MISCSTATUS_DSR BIT8
570#define MISCSTATUS_DCD_LATCHED BIT7
571#define MISCSTATUS_DCD BIT6
572#define MISCSTATUS_CTS_LATCHED BIT5
573#define MISCSTATUS_CTS BIT4
574#define MISCSTATUS_RCC_UNDERRUN BIT3
575#define MISCSTATUS_DPLL_NO_SYNC BIT2
576#define MISCSTATUS_BRG1_ZERO BIT1
577#define MISCSTATUS_BRG0_ZERO BIT0
578
579#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
580#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
581
582#define SICR_RXC_ACTIVE BIT15
583#define SICR_RXC_INACTIVE BIT14
584#define SICR_RXC (BIT15+BIT14)
585#define SICR_TXC_ACTIVE BIT13
586#define SICR_TXC_INACTIVE BIT12
587#define SICR_TXC (BIT13+BIT12)
588#define SICR_RI_ACTIVE BIT11
589#define SICR_RI_INACTIVE BIT10
590#define SICR_RI (BIT11+BIT10)
591#define SICR_DSR_ACTIVE BIT9
592#define SICR_DSR_INACTIVE BIT8
593#define SICR_DSR (BIT9+BIT8)
594#define SICR_DCD_ACTIVE BIT7
595#define SICR_DCD_INACTIVE BIT6
596#define SICR_DCD (BIT7+BIT6)
597#define SICR_CTS_ACTIVE BIT5
598#define SICR_CTS_INACTIVE BIT4
599#define SICR_CTS (BIT5+BIT4)
600#define SICR_RCC_UNDERFLOW BIT3
601#define SICR_DPLL_NO_SYNC BIT2
602#define SICR_BRG1_ZERO BIT1
603#define SICR_BRG0_ZERO BIT0
604
605void usc_DisableMasterIrqBit( struct mgsl_struct *info );
606void usc_EnableMasterIrqBit( struct mgsl_struct *info );
607void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
608void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
609void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
610
611#define usc_EnableInterrupts( a, b ) \
612 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
613
614#define usc_DisableInterrupts( a, b ) \
615 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
616
617#define usc_EnableMasterIrqBit(a) \
618 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
619
620#define usc_DisableMasterIrqBit(a) \
621 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
622
623#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
624
625/*
626 * Transmit status Bits in Transmit Control status Register (TCSR)
627 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
628 */
629
630#define TXSTATUS_PREAMBLE_SENT BIT7
631#define TXSTATUS_IDLE_SENT BIT6
632#define TXSTATUS_ABORT_SENT BIT5
633#define TXSTATUS_EOF BIT4
634#define TXSTATUS_CRC_SENT BIT3
635#define TXSTATUS_ALL_SENT BIT2
636#define TXSTATUS_UNDERRUN BIT1
637#define TXSTATUS_FIFO_EMPTY BIT0
638
639#define DICR_MASTER BIT15
640#define DICR_TRANSMIT BIT0
641#define DICR_RECEIVE BIT1
642
643#define usc_EnableDmaInterrupts(a,b) \
644 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
645
646#define usc_DisableDmaInterrupts(a,b) \
647 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
648
649#define usc_EnableStatusIrqs(a,b) \
650 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
651
652#define usc_DisablestatusIrqs(a,b) \
653 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
654
655/* Transmit status Bits in Transmit Control status Register (TCSR) */
656/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
657
658
659#define DISABLE_UNCONDITIONAL 0
660#define DISABLE_END_OF_FRAME 1
661#define ENABLE_UNCONDITIONAL 2
662#define ENABLE_AUTO_CTS 3
663#define ENABLE_AUTO_DCD 3
664#define usc_EnableTransmitter(a,b) \
665 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
666#define usc_EnableReceiver(a,b) \
667 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
668
669static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
670static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
671static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
672
673static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
674static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
675static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
676void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
677void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
678
679#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
680#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
681
682#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
683
684static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
685static void usc_start_receiver( struct mgsl_struct *info );
686static void usc_stop_receiver( struct mgsl_struct *info );
687
688static void usc_start_transmitter( struct mgsl_struct *info );
689static void usc_stop_transmitter( struct mgsl_struct *info );
690static void usc_set_txidle( struct mgsl_struct *info );
691static void usc_load_txfifo( struct mgsl_struct *info );
692
693static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
694static void usc_enable_loopback( struct mgsl_struct *info, int enable );
695
696static void usc_get_serial_signals( struct mgsl_struct *info );
697static void usc_set_serial_signals( struct mgsl_struct *info );
698
699static void usc_reset( struct mgsl_struct *info );
700
701static void usc_set_sync_mode( struct mgsl_struct *info );
702static void usc_set_sdlc_mode( struct mgsl_struct *info );
703static void usc_set_async_mode( struct mgsl_struct *info );
704static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
705
706static void usc_loopback_frame( struct mgsl_struct *info );
707
708static void mgsl_tx_timeout(unsigned long context);
709
710
711static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
712static void usc_loopmode_insert_request( struct mgsl_struct * info );
713static int usc_loopmode_active( struct mgsl_struct * info);
714static void usc_loopmode_send_done( struct mgsl_struct * info );
715
716static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
717
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800718#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719#define dev_to_port(D) (dev_to_hdlc(D)->priv)
720static void hdlcdev_tx_done(struct mgsl_struct *info);
721static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
722static int hdlcdev_init(struct mgsl_struct *info);
723static void hdlcdev_exit(struct mgsl_struct *info);
724#endif
725
726/*
727 * Defines a BUS descriptor value for the PCI adapter
728 * local bus address ranges.
729 */
730
731#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
732(0x00400020 + \
733((WrHold) << 30) + \
734((WrDly) << 28) + \
735((RdDly) << 26) + \
736((Nwdd) << 20) + \
737((Nwad) << 15) + \
738((Nxda) << 13) + \
739((Nrdd) << 11) + \
740((Nrad) << 6) )
741
742static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
743
744/*
745 * Adapter diagnostic routines
746 */
Joe Perches0fab6de2008-04-28 02:14:02 -0700747static bool mgsl_register_test( struct mgsl_struct *info );
748static bool mgsl_irq_test( struct mgsl_struct *info );
749static bool mgsl_dma_test( struct mgsl_struct *info );
750static bool mgsl_memory_test( struct mgsl_struct *info );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751static int mgsl_adapter_test( struct mgsl_struct *info );
752
753/*
754 * device and resource management routines
755 */
756static int mgsl_claim_resources(struct mgsl_struct *info);
757static void mgsl_release_resources(struct mgsl_struct *info);
758static void mgsl_add_device(struct mgsl_struct *info);
759static struct mgsl_struct* mgsl_allocate_device(void);
760
761/*
762 * DMA buffer manupulation functions.
763 */
764static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
Joe Perches0fab6de2008-04-28 02:14:02 -0700765static bool mgsl_get_rx_frame( struct mgsl_struct *info );
766static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700767static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
768static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
769static int num_free_tx_dma_buffers(struct mgsl_struct *info);
770static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
771static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
772
773/*
774 * DMA and Shared Memory buffer allocation and formatting
775 */
776static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
777static void mgsl_free_dma_buffers(struct mgsl_struct *info);
778static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
779static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
780static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
781static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
782static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
783static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
784static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
785static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
Joe Perches0fab6de2008-04-28 02:14:02 -0700786static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
788
789/*
790 * Bottom half interrupt handlers
791 */
David Howellsc4028952006-11-22 14:57:56 +0000792static void mgsl_bh_handler(struct work_struct *work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700793static void mgsl_bh_receive(struct mgsl_struct *info);
794static void mgsl_bh_transmit(struct mgsl_struct *info);
795static void mgsl_bh_status(struct mgsl_struct *info);
796
797/*
798 * Interrupt handler routines and dispatch table.
799 */
800static void mgsl_isr_null( struct mgsl_struct *info );
801static void mgsl_isr_transmit_data( struct mgsl_struct *info );
802static void mgsl_isr_receive_data( struct mgsl_struct *info );
803static void mgsl_isr_receive_status( struct mgsl_struct *info );
804static void mgsl_isr_transmit_status( struct mgsl_struct *info );
805static void mgsl_isr_io_pin( struct mgsl_struct *info );
806static void mgsl_isr_misc( struct mgsl_struct *info );
807static void mgsl_isr_receive_dma( struct mgsl_struct *info );
808static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
809
810typedef void (*isr_dispatch_func)(struct mgsl_struct *);
811
812static isr_dispatch_func UscIsrTable[7] =
813{
814 mgsl_isr_null,
815 mgsl_isr_misc,
816 mgsl_isr_io_pin,
817 mgsl_isr_transmit_data,
818 mgsl_isr_transmit_status,
819 mgsl_isr_receive_data,
820 mgsl_isr_receive_status
821};
822
823/*
824 * ioctl call handlers
825 */
826static int tiocmget(struct tty_struct *tty, struct file *file);
827static int tiocmset(struct tty_struct *tty, struct file *file,
828 unsigned int set, unsigned int clear);
829static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
830 __user *user_icount);
831static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
832static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
833static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
834static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
835static int mgsl_txenable(struct mgsl_struct * info, int enable);
836static int mgsl_txabort(struct mgsl_struct * info);
837static int mgsl_rxenable(struct mgsl_struct * info, int enable);
838static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
839static int mgsl_loopmode_send_done( struct mgsl_struct * info );
840
841/* set non-zero on successful registration with PCI subsystem */
Joe Perches0fab6de2008-04-28 02:14:02 -0700842static bool pci_registered;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700843
844/*
845 * Global linked list of SyncLink devices
846 */
847static struct mgsl_struct *mgsl_device_list;
848static int mgsl_device_count;
849
850/*
851 * Set this param to non-zero to load eax with the
852 * .text section address and breakpoint on module load.
853 * This is useful for use with gdb and add-symbol-file command.
854 */
855static int break_on_load;
856
857/*
858 * Driver major number, defaults to zero to get auto
859 * assigned major number. May be forced as module parameter.
860 */
861static int ttymajor;
862
863/*
864 * Array of user specified options for ISA adapters.
865 */
866static int io[MAX_ISA_DEVICES];
867static int irq[MAX_ISA_DEVICES];
868static int dma[MAX_ISA_DEVICES];
869static int debug_level;
870static int maxframe[MAX_TOTAL_DEVICES];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871static int txdmabufs[MAX_TOTAL_DEVICES];
872static int txholdbufs[MAX_TOTAL_DEVICES];
873
874module_param(break_on_load, bool, 0);
875module_param(ttymajor, int, 0);
876module_param_array(io, int, NULL, 0);
877module_param_array(irq, int, NULL, 0);
878module_param_array(dma, int, NULL, 0);
879module_param(debug_level, int, 0);
880module_param_array(maxframe, int, NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700881module_param_array(txdmabufs, int, NULL, 0);
882module_param_array(txholdbufs, int, NULL, 0);
883
884static char *driver_name = "SyncLink serial driver";
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800885static char *driver_version = "$Revision: 4.38 $";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700886
887static int synclink_init_one (struct pci_dev *dev,
888 const struct pci_device_id *ent);
889static void synclink_remove_one (struct pci_dev *dev);
890
891static struct pci_device_id synclink_pci_tbl[] = {
892 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
893 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
894 { 0, }, /* terminate list */
895};
896MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
897
898MODULE_LICENSE("GPL");
899
900static struct pci_driver synclink_pci_driver = {
901 .name = "synclink",
902 .id_table = synclink_pci_tbl,
903 .probe = synclink_init_one,
904 .remove = __devexit_p(synclink_remove_one),
905};
906
907static struct tty_driver *serial_driver;
908
909/* number of characters left in xmit buffer before we ask for more */
910#define WAKEUP_CHARS 256
911
912
913static void mgsl_change_params(struct mgsl_struct *info);
914static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
915
916/*
917 * 1st function defined in .text section. Calling this function in
918 * init_module() followed by a breakpoint allows a remote debugger
919 * (gdb) to get the .text address for the add-symbol-file command.
920 * This allows remote debugging of dynamically loadable modules.
921 */
922static void* mgsl_get_text_ptr(void)
923{
924 return mgsl_get_text_ptr;
925}
926
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927static inline int mgsl_paranoia_check(struct mgsl_struct *info,
928 char *name, const char *routine)
929{
930#ifdef MGSL_PARANOIA_CHECK
931 static const char *badmagic =
932 "Warning: bad magic number for mgsl struct (%s) in %s\n";
933 static const char *badinfo =
934 "Warning: null mgsl_struct for (%s) in %s\n";
935
936 if (!info) {
937 printk(badinfo, name, routine);
938 return 1;
939 }
940 if (info->magic != MGSL_MAGIC) {
941 printk(badmagic, name, routine);
942 return 1;
943 }
944#else
945 if (!info)
946 return 1;
947#endif
948 return 0;
949}
950
951/**
952 * line discipline callback wrappers
953 *
954 * The wrappers maintain line discipline references
955 * while calling into the line discipline.
956 *
957 * ldisc_receive_buf - pass receive data to line discipline
958 */
959
960static void ldisc_receive_buf(struct tty_struct *tty,
961 const __u8 *data, char *flags, int count)
962{
963 struct tty_ldisc *ld;
964 if (!tty)
965 return;
966 ld = tty_ldisc_ref(tty);
967 if (ld) {
Alan Coxa352def2008-07-16 21:53:12 +0100968 if (ld->ops->receive_buf)
969 ld->ops->receive_buf(tty, data, flags, count);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700970 tty_ldisc_deref(ld);
971 }
972}
973
974/* mgsl_stop() throttle (stop) transmitter
975 *
976 * Arguments: tty pointer to tty info structure
977 * Return Value: None
978 */
979static void mgsl_stop(struct tty_struct *tty)
980{
Alan Coxc9f19e92009-01-02 13:47:26 +0000981 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700982 unsigned long flags;
983
984 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
985 return;
986
987 if ( debug_level >= DEBUG_LEVEL_INFO )
988 printk("mgsl_stop(%s)\n",info->device_name);
989
990 spin_lock_irqsave(&info->irq_spinlock,flags);
991 if (info->tx_enabled)
992 usc_stop_transmitter(info);
993 spin_unlock_irqrestore(&info->irq_spinlock,flags);
994
995} /* end of mgsl_stop() */
996
997/* mgsl_start() release (start) transmitter
998 *
999 * Arguments: tty pointer to tty info structure
1000 * Return Value: None
1001 */
1002static void mgsl_start(struct tty_struct *tty)
1003{
Alan Coxc9f19e92009-01-02 13:47:26 +00001004 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005 unsigned long flags;
1006
1007 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1008 return;
1009
1010 if ( debug_level >= DEBUG_LEVEL_INFO )
1011 printk("mgsl_start(%s)\n",info->device_name);
1012
1013 spin_lock_irqsave(&info->irq_spinlock,flags);
1014 if (!info->tx_enabled)
1015 usc_start_transmitter(info);
1016 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1017
1018} /* end of mgsl_start() */
1019
1020/*
1021 * Bottom half work queue access functions
1022 */
1023
1024/* mgsl_bh_action() Return next bottom half action to perform.
1025 * Return Value: BH action code or 0 if nothing to do.
1026 */
1027static int mgsl_bh_action(struct mgsl_struct *info)
1028{
1029 unsigned long flags;
1030 int rc = 0;
1031
1032 spin_lock_irqsave(&info->irq_spinlock,flags);
1033
1034 if (info->pending_bh & BH_RECEIVE) {
1035 info->pending_bh &= ~BH_RECEIVE;
1036 rc = BH_RECEIVE;
1037 } else if (info->pending_bh & BH_TRANSMIT) {
1038 info->pending_bh &= ~BH_TRANSMIT;
1039 rc = BH_TRANSMIT;
1040 } else if (info->pending_bh & BH_STATUS) {
1041 info->pending_bh &= ~BH_STATUS;
1042 rc = BH_STATUS;
1043 }
1044
1045 if (!rc) {
1046 /* Mark BH routine as complete */
Joe Perches0fab6de2008-04-28 02:14:02 -07001047 info->bh_running = false;
1048 info->bh_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 }
1050
1051 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1052
1053 return rc;
1054}
1055
1056/*
1057 * Perform bottom half processing of work items queued by ISR.
1058 */
David Howellsc4028952006-11-22 14:57:56 +00001059static void mgsl_bh_handler(struct work_struct *work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001060{
David Howellsc4028952006-11-22 14:57:56 +00001061 struct mgsl_struct *info =
1062 container_of(work, struct mgsl_struct, task);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063 int action;
1064
1065 if (!info)
1066 return;
1067
1068 if ( debug_level >= DEBUG_LEVEL_BH )
1069 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1070 __FILE__,__LINE__,info->device_name);
1071
Joe Perches0fab6de2008-04-28 02:14:02 -07001072 info->bh_running = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073
1074 while((action = mgsl_bh_action(info)) != 0) {
1075
1076 /* Process work item */
1077 if ( debug_level >= DEBUG_LEVEL_BH )
1078 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1079 __FILE__,__LINE__,action);
1080
1081 switch (action) {
1082
1083 case BH_RECEIVE:
1084 mgsl_bh_receive(info);
1085 break;
1086 case BH_TRANSMIT:
1087 mgsl_bh_transmit(info);
1088 break;
1089 case BH_STATUS:
1090 mgsl_bh_status(info);
1091 break;
1092 default:
1093 /* unknown work item ID */
1094 printk("Unknown work item ID=%08X!\n", action);
1095 break;
1096 }
1097 }
1098
1099 if ( debug_level >= DEBUG_LEVEL_BH )
1100 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1101 __FILE__,__LINE__,info->device_name);
1102}
1103
1104static void mgsl_bh_receive(struct mgsl_struct *info)
1105{
Joe Perches0fab6de2008-04-28 02:14:02 -07001106 bool (*get_rx_frame)(struct mgsl_struct *info) =
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1108
1109 if ( debug_level >= DEBUG_LEVEL_BH )
1110 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1111 __FILE__,__LINE__,info->device_name);
1112
1113 do
1114 {
1115 if (info->rx_rcc_underrun) {
1116 unsigned long flags;
1117 spin_lock_irqsave(&info->irq_spinlock,flags);
1118 usc_start_receiver(info);
1119 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1120 return;
1121 }
1122 } while(get_rx_frame(info));
1123}
1124
1125static void mgsl_bh_transmit(struct mgsl_struct *info)
1126{
Alan Cox8fb06c72008-07-16 21:56:46 +01001127 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001128 unsigned long flags;
1129
1130 if ( debug_level >= DEBUG_LEVEL_BH )
1131 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1132 __FILE__,__LINE__,info->device_name);
1133
Jiri Slabyb963a842007-02-10 01:44:55 -08001134 if (tty)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001135 tty_wakeup(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001136
1137 /* if transmitter idle and loopmode_send_done_requested
1138 * then start echoing RxD to TxD
1139 */
1140 spin_lock_irqsave(&info->irq_spinlock,flags);
1141 if ( !info->tx_active && info->loopmode_send_done_requested )
1142 usc_loopmode_send_done( info );
1143 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1144}
1145
1146static void mgsl_bh_status(struct mgsl_struct *info)
1147{
1148 if ( debug_level >= DEBUG_LEVEL_BH )
1149 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1150 __FILE__,__LINE__,info->device_name);
1151
1152 info->ri_chkcount = 0;
1153 info->dsr_chkcount = 0;
1154 info->dcd_chkcount = 0;
1155 info->cts_chkcount = 0;
1156}
1157
1158/* mgsl_isr_receive_status()
1159 *
1160 * Service a receive status interrupt. The type of status
1161 * interrupt is indicated by the state of the RCSR.
1162 * This is only used for HDLC mode.
1163 *
1164 * Arguments: info pointer to device instance data
1165 * Return Value: None
1166 */
1167static void mgsl_isr_receive_status( struct mgsl_struct *info )
1168{
1169 u16 status = usc_InReg( info, RCSR );
1170
1171 if ( debug_level >= DEBUG_LEVEL_ISR )
1172 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1173 __FILE__,__LINE__,status);
1174
1175 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1176 info->loopmode_insert_requested &&
1177 usc_loopmode_active(info) )
1178 {
1179 ++info->icount.rxabort;
Joe Perches0fab6de2008-04-28 02:14:02 -07001180 info->loopmode_insert_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181
1182 /* clear CMR:13 to start echoing RxD to TxD */
1183 info->cmr_value &= ~BIT13;
1184 usc_OutReg(info, CMR, info->cmr_value);
1185
1186 /* disable received abort irq (no longer required) */
1187 usc_OutReg(info, RICR,
1188 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1189 }
1190
1191 if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
1192 if (status & RXSTATUS_EXITED_HUNT)
1193 info->icount.exithunt++;
1194 if (status & RXSTATUS_IDLE_RECEIVED)
1195 info->icount.rxidle++;
1196 wake_up_interruptible(&info->event_wait_q);
1197 }
1198
1199 if (status & RXSTATUS_OVERRUN){
1200 info->icount.rxover++;
1201 usc_process_rxoverrun_sync( info );
1202 }
1203
1204 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1205 usc_UnlatchRxstatusBits( info, status );
1206
1207} /* end of mgsl_isr_receive_status() */
1208
1209/* mgsl_isr_transmit_status()
1210 *
1211 * Service a transmit status interrupt
1212 * HDLC mode :end of transmit frame
1213 * Async mode:all data is sent
1214 * transmit status is indicated by bits in the TCSR.
1215 *
1216 * Arguments: info pointer to device instance data
1217 * Return Value: None
1218 */
1219static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1220{
1221 u16 status = usc_InReg( info, TCSR );
1222
1223 if ( debug_level >= DEBUG_LEVEL_ISR )
1224 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1225 __FILE__,__LINE__,status);
1226
1227 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1228 usc_UnlatchTxstatusBits( info, status );
1229
1230 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1231 {
1232 /* finished sending HDLC abort. This may leave */
1233 /* the TxFifo with data from the aborted frame */
1234 /* so purge the TxFifo. Also shutdown the DMA */
1235 /* channel in case there is data remaining in */
1236 /* the DMA buffer */
1237 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1238 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1239 }
1240
1241 if ( status & TXSTATUS_EOF_SENT )
1242 info->icount.txok++;
1243 else if ( status & TXSTATUS_UNDERRUN )
1244 info->icount.txunder++;
1245 else if ( status & TXSTATUS_ABORT_SENT )
1246 info->icount.txabort++;
1247 else
1248 info->icount.txunder++;
1249
Joe Perches0fab6de2008-04-28 02:14:02 -07001250 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1252 del_timer(&info->tx_timer);
1253
1254 if ( info->drop_rts_on_tx_done ) {
1255 usc_get_serial_signals( info );
1256 if ( info->serial_signals & SerialSignal_RTS ) {
1257 info->serial_signals &= ~SerialSignal_RTS;
1258 usc_set_serial_signals( info );
1259 }
Joe Perches0fab6de2008-04-28 02:14:02 -07001260 info->drop_rts_on_tx_done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001261 }
1262
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001263#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001264 if (info->netcount)
1265 hdlcdev_tx_done(info);
1266 else
1267#endif
1268 {
Alan Cox8fb06c72008-07-16 21:56:46 +01001269 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001270 usc_stop_transmitter(info);
1271 return;
1272 }
1273 info->pending_bh |= BH_TRANSMIT;
1274 }
1275
1276} /* end of mgsl_isr_transmit_status() */
1277
1278/* mgsl_isr_io_pin()
1279 *
1280 * Service an Input/Output pin interrupt. The type of
1281 * interrupt is indicated by bits in the MISR
1282 *
1283 * Arguments: info pointer to device instance data
1284 * Return Value: None
1285 */
1286static void mgsl_isr_io_pin( struct mgsl_struct *info )
1287{
1288 struct mgsl_icount *icount;
1289 u16 status = usc_InReg( info, MISR );
1290
1291 if ( debug_level >= DEBUG_LEVEL_ISR )
1292 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1293 __FILE__,__LINE__,status);
1294
1295 usc_ClearIrqPendingBits( info, IO_PIN );
1296 usc_UnlatchIostatusBits( info, status );
1297
1298 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1299 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1300 icount = &info->icount;
1301 /* update input line counters */
1302 if (status & MISCSTATUS_RI_LATCHED) {
1303 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1304 usc_DisablestatusIrqs(info,SICR_RI);
1305 icount->rng++;
1306 if ( status & MISCSTATUS_RI )
1307 info->input_signal_events.ri_up++;
1308 else
1309 info->input_signal_events.ri_down++;
1310 }
1311 if (status & MISCSTATUS_DSR_LATCHED) {
1312 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1313 usc_DisablestatusIrqs(info,SICR_DSR);
1314 icount->dsr++;
1315 if ( status & MISCSTATUS_DSR )
1316 info->input_signal_events.dsr_up++;
1317 else
1318 info->input_signal_events.dsr_down++;
1319 }
1320 if (status & MISCSTATUS_DCD_LATCHED) {
1321 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1322 usc_DisablestatusIrqs(info,SICR_DCD);
1323 icount->dcd++;
1324 if (status & MISCSTATUS_DCD) {
1325 info->input_signal_events.dcd_up++;
1326 } else
1327 info->input_signal_events.dcd_down++;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001328#if SYNCLINK_GENERIC_HDLC
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07001329 if (info->netcount) {
1330 if (status & MISCSTATUS_DCD)
1331 netif_carrier_on(info->netdev);
1332 else
1333 netif_carrier_off(info->netdev);
1334 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001335#endif
1336 }
1337 if (status & MISCSTATUS_CTS_LATCHED)
1338 {
1339 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1340 usc_DisablestatusIrqs(info,SICR_CTS);
1341 icount->cts++;
1342 if ( status & MISCSTATUS_CTS )
1343 info->input_signal_events.cts_up++;
1344 else
1345 info->input_signal_events.cts_down++;
1346 }
1347 wake_up_interruptible(&info->status_event_wait_q);
1348 wake_up_interruptible(&info->event_wait_q);
1349
Alan Cox8fb06c72008-07-16 21:56:46 +01001350 if ( (info->port.flags & ASYNC_CHECK_CD) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07001351 (status & MISCSTATUS_DCD_LATCHED) ) {
1352 if ( debug_level >= DEBUG_LEVEL_ISR )
1353 printk("%s CD now %s...", info->device_name,
1354 (status & MISCSTATUS_DCD) ? "on" : "off");
1355 if (status & MISCSTATUS_DCD)
Alan Cox8fb06c72008-07-16 21:56:46 +01001356 wake_up_interruptible(&info->port.open_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001357 else {
1358 if ( debug_level >= DEBUG_LEVEL_ISR )
1359 printk("doing serial hangup...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001360 if (info->port.tty)
1361 tty_hangup(info->port.tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001362 }
1363 }
1364
Alan Cox8fb06c72008-07-16 21:56:46 +01001365 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07001366 (status & MISCSTATUS_CTS_LATCHED) ) {
Alan Cox8fb06c72008-07-16 21:56:46 +01001367 if (info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368 if (status & MISCSTATUS_CTS) {
1369 if ( debug_level >= DEBUG_LEVEL_ISR )
1370 printk("CTS tx start...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001371 if (info->port.tty)
1372 info->port.tty->hw_stopped = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373 usc_start_transmitter(info);
1374 info->pending_bh |= BH_TRANSMIT;
1375 return;
1376 }
1377 } else {
1378 if (!(status & MISCSTATUS_CTS)) {
1379 if ( debug_level >= DEBUG_LEVEL_ISR )
1380 printk("CTS tx stop...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001381 if (info->port.tty)
1382 info->port.tty->hw_stopped = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001383 usc_stop_transmitter(info);
1384 }
1385 }
1386 }
1387 }
1388
1389 info->pending_bh |= BH_STATUS;
1390
1391 /* for diagnostics set IRQ flag */
1392 if ( status & MISCSTATUS_TXC_LATCHED ){
1393 usc_OutReg( info, SICR,
1394 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1395 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
Joe Perches0fab6de2008-04-28 02:14:02 -07001396 info->irq_occurred = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397 }
1398
1399} /* end of mgsl_isr_io_pin() */
1400
1401/* mgsl_isr_transmit_data()
1402 *
1403 * Service a transmit data interrupt (async mode only).
1404 *
1405 * Arguments: info pointer to device instance data
1406 * Return Value: None
1407 */
1408static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1409{
1410 if ( debug_level >= DEBUG_LEVEL_ISR )
1411 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1412 __FILE__,__LINE__,info->xmit_cnt);
1413
1414 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1415
Alan Cox8fb06c72008-07-16 21:56:46 +01001416 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001417 usc_stop_transmitter(info);
1418 return;
1419 }
1420
1421 if ( info->xmit_cnt )
1422 usc_load_txfifo( info );
1423 else
Joe Perches0fab6de2008-04-28 02:14:02 -07001424 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001425
1426 if (info->xmit_cnt < WAKEUP_CHARS)
1427 info->pending_bh |= BH_TRANSMIT;
1428
1429} /* end of mgsl_isr_transmit_data() */
1430
1431/* mgsl_isr_receive_data()
1432 *
1433 * Service a receive data interrupt. This occurs
1434 * when operating in asynchronous interrupt transfer mode.
1435 * The receive data FIFO is flushed to the receive data buffers.
1436 *
1437 * Arguments: info pointer to device instance data
1438 * Return Value: None
1439 */
1440static void mgsl_isr_receive_data( struct mgsl_struct *info )
1441{
1442 int Fifocount;
1443 u16 status;
Alan Cox33f0f882006-01-09 20:54:13 -08001444 int work = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001445 unsigned char DataByte;
Alan Cox8fb06c72008-07-16 21:56:46 +01001446 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001447 struct mgsl_icount *icount = &info->icount;
1448
1449 if ( debug_level >= DEBUG_LEVEL_ISR )
1450 printk("%s(%d):mgsl_isr_receive_data\n",
1451 __FILE__,__LINE__);
1452
1453 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1454
1455 /* select FIFO status for RICR readback */
1456 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1457
1458 /* clear the Wordstatus bit so that status readback */
1459 /* only reflects the status of this byte */
1460 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1461
1462 /* flush the receive FIFO */
1463
1464 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
Alan Cox33f0f882006-01-09 20:54:13 -08001465 int flag;
1466
Linus Torvalds1da177e2005-04-16 15:20:36 -07001467 /* read one byte from RxFIFO */
1468 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1469 info->io_base + CCAR );
1470 DataByte = inb( info->io_base + CCAR );
1471
1472 /* get the status of the received byte */
1473 status = usc_InReg(info, RCSR);
1474 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1475 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
1476 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1477
Linus Torvalds1da177e2005-04-16 15:20:36 -07001478 icount->rx++;
1479
Alan Cox33f0f882006-01-09 20:54:13 -08001480 flag = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001481 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1482 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
1483 printk("rxerr=%04X\n",status);
1484 /* update error statistics */
1485 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1486 status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
1487 icount->brk++;
1488 } else if (status & RXSTATUS_PARITY_ERROR)
1489 icount->parity++;
1490 else if (status & RXSTATUS_FRAMING_ERROR)
1491 icount->frame++;
1492 else if (status & RXSTATUS_OVERRUN) {
1493 /* must issue purge fifo cmd before */
1494 /* 16C32 accepts more receive chars */
1495 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1496 icount->overrun++;
1497 }
1498
1499 /* discard char if tty control flags say so */
1500 if (status & info->ignore_status_mask)
1501 continue;
1502
1503 status &= info->read_status_mask;
1504
1505 if (status & RXSTATUS_BREAK_RECEIVED) {
Alan Cox33f0f882006-01-09 20:54:13 -08001506 flag = TTY_BREAK;
Alan Cox8fb06c72008-07-16 21:56:46 +01001507 if (info->port.flags & ASYNC_SAK)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001508 do_SAK(tty);
1509 } else if (status & RXSTATUS_PARITY_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001510 flag = TTY_PARITY;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001511 else if (status & RXSTATUS_FRAMING_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001512 flag = TTY_FRAME;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513 } /* end of if (error) */
Alan Cox33f0f882006-01-09 20:54:13 -08001514 tty_insert_flip_char(tty, DataByte, flag);
1515 if (status & RXSTATUS_OVERRUN) {
1516 /* Overrun is special, since it's
1517 * reported immediately, and doesn't
1518 * affect the current character
1519 */
1520 work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1521 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001522 }
1523
1524 if ( debug_level >= DEBUG_LEVEL_ISR ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001525 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1526 __FILE__,__LINE__,icount->rx,icount->brk,
1527 icount->parity,icount->frame,icount->overrun);
1528 }
1529
Alan Cox33f0f882006-01-09 20:54:13 -08001530 if(work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001531 tty_flip_buffer_push(tty);
1532}
1533
1534/* mgsl_isr_misc()
1535 *
Joe Perches8dfba4d2008-02-03 17:11:42 +02001536 * Service a miscellaneous interrupt source.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001537 *
1538 * Arguments: info pointer to device extension (instance data)
1539 * Return Value: None
1540 */
1541static void mgsl_isr_misc( struct mgsl_struct *info )
1542{
1543 u16 status = usc_InReg( info, MISR );
1544
1545 if ( debug_level >= DEBUG_LEVEL_ISR )
1546 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1547 __FILE__,__LINE__,status);
1548
1549 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1550 (info->params.mode == MGSL_MODE_HDLC)) {
1551
1552 /* turn off receiver and rx DMA */
1553 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1554 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1555 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1556 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
1557 usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
1558
1559 /* schedule BH handler to restart receiver */
1560 info->pending_bh |= BH_RECEIVE;
Joe Perches0fab6de2008-04-28 02:14:02 -07001561 info->rx_rcc_underrun = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001562 }
1563
1564 usc_ClearIrqPendingBits( info, MISC );
1565 usc_UnlatchMiscstatusBits( info, status );
1566
1567} /* end of mgsl_isr_misc() */
1568
1569/* mgsl_isr_null()
1570 *
1571 * Services undefined interrupt vectors from the
1572 * USC. (hence this function SHOULD never be called)
1573 *
1574 * Arguments: info pointer to device extension (instance data)
1575 * Return Value: None
1576 */
1577static void mgsl_isr_null( struct mgsl_struct *info )
1578{
1579
1580} /* end of mgsl_isr_null() */
1581
1582/* mgsl_isr_receive_dma()
1583 *
1584 * Service a receive DMA channel interrupt.
1585 * For this driver there are two sources of receive DMA interrupts
1586 * as identified in the Receive DMA mode Register (RDMR):
1587 *
1588 * BIT3 EOA/EOL End of List, all receive buffers in receive
1589 * buffer list have been filled (no more free buffers
1590 * available). The DMA controller has shut down.
1591 *
1592 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1593 * DMA buffer is terminated in response to completion
1594 * of a good frame or a frame with errors. The status
1595 * of the frame is stored in the buffer entry in the
1596 * list of receive buffer entries.
1597 *
1598 * Arguments: info pointer to device instance data
1599 * Return Value: None
1600 */
1601static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1602{
1603 u16 status;
1604
1605 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1606 usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
1607
1608 /* Read the receive DMA status to identify interrupt type. */
1609 /* This also clears the status bits. */
1610 status = usc_InDmaReg( info, RDMR );
1611
1612 if ( debug_level >= DEBUG_LEVEL_ISR )
1613 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1614 __FILE__,__LINE__,info->device_name,status);
1615
1616 info->pending_bh |= BH_RECEIVE;
1617
1618 if ( status & BIT3 ) {
Joe Perches0fab6de2008-04-28 02:14:02 -07001619 info->rx_overflow = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001620 info->icount.buf_overrun++;
1621 }
1622
1623} /* end of mgsl_isr_receive_dma() */
1624
1625/* mgsl_isr_transmit_dma()
1626 *
1627 * This function services a transmit DMA channel interrupt.
1628 *
1629 * For this driver there is one source of transmit DMA interrupts
1630 * as identified in the Transmit DMA Mode Register (TDMR):
1631 *
1632 * BIT2 EOB End of Buffer. This interrupt occurs when a
1633 * transmit DMA buffer has been emptied.
1634 *
1635 * The driver maintains enough transmit DMA buffers to hold at least
1636 * one max frame size transmit frame. When operating in a buffered
1637 * transmit mode, there may be enough transmit DMA buffers to hold at
1638 * least two or more max frame size frames. On an EOB condition,
1639 * determine if there are any queued transmit buffers and copy into
1640 * transmit DMA buffers if we have room.
1641 *
1642 * Arguments: info pointer to device instance data
1643 * Return Value: None
1644 */
1645static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1646{
1647 u16 status;
1648
1649 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1650 usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
1651
1652 /* Read the transmit DMA status to identify interrupt type. */
1653 /* This also clears the status bits. */
1654
1655 status = usc_InDmaReg( info, TDMR );
1656
1657 if ( debug_level >= DEBUG_LEVEL_ISR )
1658 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1659 __FILE__,__LINE__,info->device_name,status);
1660
1661 if ( status & BIT2 ) {
1662 --info->tx_dma_buffers_used;
1663
1664 /* if there are transmit frames queued,
1665 * try to load the next one
1666 */
1667 if ( load_next_tx_holding_buffer(info) ) {
1668 /* if call returns non-zero value, we have
1669 * at least one free tx holding buffer
1670 */
1671 info->pending_bh |= BH_TRANSMIT;
1672 }
1673 }
1674
1675} /* end of mgsl_isr_transmit_dma() */
1676
1677/* mgsl_interrupt()
1678 *
1679 * Interrupt service routine entry point.
1680 *
1681 * Arguments:
1682 *
1683 * irq interrupt number that caused interrupt
1684 * dev_id device ID supplied during interrupt registration
Linus Torvalds1da177e2005-04-16 15:20:36 -07001685 *
1686 * Return Value: None
1687 */
Jeff Garzika6f97b22007-10-31 05:20:49 -04001688static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001689{
Jeff Garzika6f97b22007-10-31 05:20:49 -04001690 struct mgsl_struct *info = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691 u16 UscVector;
1692 u16 DmaVector;
1693
1694 if ( debug_level >= DEBUG_LEVEL_ISR )
Jeff Garzika6f97b22007-10-31 05:20:49 -04001695 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
1696 __FILE__, __LINE__, info->irq_level);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001697
Linus Torvalds1da177e2005-04-16 15:20:36 -07001698 spin_lock(&info->irq_spinlock);
1699
1700 for(;;) {
1701 /* Read the interrupt vectors from hardware. */
1702 UscVector = usc_InReg(info, IVR) >> 9;
1703 DmaVector = usc_InDmaReg(info, DIVR);
1704
1705 if ( debug_level >= DEBUG_LEVEL_ISR )
1706 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1707 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1708
1709 if ( !UscVector && !DmaVector )
1710 break;
1711
1712 /* Dispatch interrupt vector */
1713 if ( UscVector )
1714 (*UscIsrTable[UscVector])(info);
1715 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1716 mgsl_isr_transmit_dma(info);
1717 else
1718 mgsl_isr_receive_dma(info);
1719
1720 if ( info->isr_overflow ) {
Jeff Garzika6f97b22007-10-31 05:20:49 -04001721 printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
1722 __FILE__, __LINE__, info->device_name, info->irq_level);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001723 usc_DisableMasterIrqBit(info);
1724 usc_DisableDmaInterrupts(info,DICR_MASTER);
1725 break;
1726 }
1727 }
1728
1729 /* Request bottom half processing if there's something
1730 * for it to do and the bh is not already running
1731 */
1732
1733 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1734 if ( debug_level >= DEBUG_LEVEL_ISR )
1735 printk("%s(%d):%s queueing bh task.\n",
1736 __FILE__,__LINE__,info->device_name);
1737 schedule_work(&info->task);
Joe Perches0fab6de2008-04-28 02:14:02 -07001738 info->bh_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001739 }
1740
1741 spin_unlock(&info->irq_spinlock);
1742
1743 if ( debug_level >= DEBUG_LEVEL_ISR )
Jeff Garzika6f97b22007-10-31 05:20:49 -04001744 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
1745 __FILE__, __LINE__, info->irq_level);
1746
Linus Torvalds1da177e2005-04-16 15:20:36 -07001747 return IRQ_HANDLED;
1748} /* end of mgsl_interrupt() */
1749
1750/* startup()
1751 *
1752 * Initialize and start device.
1753 *
1754 * Arguments: info pointer to device instance data
1755 * Return Value: 0 if success, otherwise error code
1756 */
1757static int startup(struct mgsl_struct * info)
1758{
1759 int retval = 0;
1760
1761 if ( debug_level >= DEBUG_LEVEL_INFO )
1762 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1763
Alan Cox8fb06c72008-07-16 21:56:46 +01001764 if (info->port.flags & ASYNC_INITIALIZED)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001765 return 0;
1766
1767 if (!info->xmit_buf) {
1768 /* allocate a page of memory for a transmit buffer */
1769 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1770 if (!info->xmit_buf) {
1771 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1772 __FILE__,__LINE__,info->device_name);
1773 return -ENOMEM;
1774 }
1775 }
1776
1777 info->pending_bh = 0;
1778
Paul Fulghum96612392005-09-09 13:02:13 -07001779 memset(&info->icount, 0, sizeof(info->icount));
1780
Jiri Slaby40565f12007-02-12 00:52:31 -08001781 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001782
1783 /* Allocate and claim adapter resources */
1784 retval = mgsl_claim_resources(info);
1785
1786 /* perform existence check and diagnostics */
1787 if ( !retval )
1788 retval = mgsl_adapter_test(info);
1789
1790 if ( retval ) {
Alan Cox8fb06c72008-07-16 21:56:46 +01001791 if (capable(CAP_SYS_ADMIN) && info->port.tty)
1792 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793 mgsl_release_resources(info);
1794 return retval;
1795 }
1796
1797 /* program hardware for current parameters */
1798 mgsl_change_params(info);
1799
Alan Cox8fb06c72008-07-16 21:56:46 +01001800 if (info->port.tty)
1801 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001802
Alan Cox8fb06c72008-07-16 21:56:46 +01001803 info->port.flags |= ASYNC_INITIALIZED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001804
1805 return 0;
1806
1807} /* end of startup() */
1808
1809/* shutdown()
1810 *
1811 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1812 *
1813 * Arguments: info pointer to device instance data
1814 * Return Value: None
1815 */
1816static void shutdown(struct mgsl_struct * info)
1817{
1818 unsigned long flags;
1819
Alan Cox8fb06c72008-07-16 21:56:46 +01001820 if (!(info->port.flags & ASYNC_INITIALIZED))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001821 return;
1822
1823 if (debug_level >= DEBUG_LEVEL_INFO)
1824 printk("%s(%d):mgsl_shutdown(%s)\n",
1825 __FILE__,__LINE__, info->device_name );
1826
1827 /* clear status wait queue because status changes */
1828 /* can't happen after shutting down the hardware */
1829 wake_up_interruptible(&info->status_event_wait_q);
1830 wake_up_interruptible(&info->event_wait_q);
1831
Jiri Slaby40565f12007-02-12 00:52:31 -08001832 del_timer_sync(&info->tx_timer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001833
1834 if (info->xmit_buf) {
1835 free_page((unsigned long) info->xmit_buf);
1836 info->xmit_buf = NULL;
1837 }
1838
1839 spin_lock_irqsave(&info->irq_spinlock,flags);
1840 usc_DisableMasterIrqBit(info);
1841 usc_stop_receiver(info);
1842 usc_stop_transmitter(info);
1843 usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
1844 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
1845 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1846
1847 /* Disable DMAEN (Port 7, Bit 14) */
1848 /* This disconnects the DMA request signal from the ISA bus */
1849 /* on the ISA adapter. This has no effect for the PCI adapter */
1850 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1851
1852 /* Disable INTEN (Port 6, Bit12) */
1853 /* This disconnects the IRQ request signal to the ISA bus */
1854 /* on the ISA adapter. This has no effect for the PCI adapter */
1855 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1856
Alan Cox8fb06c72008-07-16 21:56:46 +01001857 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001858 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1859 usc_set_serial_signals(info);
1860 }
1861
1862 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1863
1864 mgsl_release_resources(info);
1865
Alan Cox8fb06c72008-07-16 21:56:46 +01001866 if (info->port.tty)
1867 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001868
Alan Cox8fb06c72008-07-16 21:56:46 +01001869 info->port.flags &= ~ASYNC_INITIALIZED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001870
1871} /* end of shutdown() */
1872
1873static void mgsl_program_hw(struct mgsl_struct *info)
1874{
1875 unsigned long flags;
1876
1877 spin_lock_irqsave(&info->irq_spinlock,flags);
1878
1879 usc_stop_receiver(info);
1880 usc_stop_transmitter(info);
1881 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1882
1883 if (info->params.mode == MGSL_MODE_HDLC ||
1884 info->params.mode == MGSL_MODE_RAW ||
1885 info->netcount)
1886 usc_set_sync_mode(info);
1887 else
1888 usc_set_async_mode(info);
1889
1890 usc_set_serial_signals(info);
1891
1892 info->dcd_chkcount = 0;
1893 info->cts_chkcount = 0;
1894 info->ri_chkcount = 0;
1895 info->dsr_chkcount = 0;
1896
1897 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1898 usc_EnableInterrupts(info, IO_PIN);
1899 usc_get_serial_signals(info);
1900
Alan Cox8fb06c72008-07-16 21:56:46 +01001901 if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001902 usc_start_receiver(info);
1903
1904 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1905}
1906
1907/* Reconfigure adapter based on new parameters
1908 */
1909static void mgsl_change_params(struct mgsl_struct *info)
1910{
1911 unsigned cflag;
1912 int bits_per_char;
1913
Alan Cox8fb06c72008-07-16 21:56:46 +01001914 if (!info->port.tty || !info->port.tty->termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001915 return;
1916
1917 if (debug_level >= DEBUG_LEVEL_INFO)
1918 printk("%s(%d):mgsl_change_params(%s)\n",
1919 __FILE__,__LINE__, info->device_name );
1920
Alan Cox8fb06c72008-07-16 21:56:46 +01001921 cflag = info->port.tty->termios->c_cflag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001922
1923 /* if B0 rate (hangup) specified then negate DTR and RTS */
1924 /* otherwise assert DTR and RTS */
1925 if (cflag & CBAUD)
1926 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1927 else
1928 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1929
1930 /* byte size and parity */
1931
1932 switch (cflag & CSIZE) {
1933 case CS5: info->params.data_bits = 5; break;
1934 case CS6: info->params.data_bits = 6; break;
1935 case CS7: info->params.data_bits = 7; break;
1936 case CS8: info->params.data_bits = 8; break;
1937 /* Never happens, but GCC is too dumb to figure it out */
1938 default: info->params.data_bits = 7; break;
1939 }
1940
1941 if (cflag & CSTOPB)
1942 info->params.stop_bits = 2;
1943 else
1944 info->params.stop_bits = 1;
1945
1946 info->params.parity = ASYNC_PARITY_NONE;
1947 if (cflag & PARENB) {
1948 if (cflag & PARODD)
1949 info->params.parity = ASYNC_PARITY_ODD;
1950 else
1951 info->params.parity = ASYNC_PARITY_EVEN;
1952#ifdef CMSPAR
1953 if (cflag & CMSPAR)
1954 info->params.parity = ASYNC_PARITY_SPACE;
1955#endif
1956 }
1957
1958 /* calculate number of jiffies to transmit a full
1959 * FIFO (32 bytes) at specified data rate
1960 */
1961 bits_per_char = info->params.data_bits +
1962 info->params.stop_bits + 1;
1963
1964 /* if port data rate is set to 460800 or less then
1965 * allow tty settings to override, otherwise keep the
1966 * current data rate.
1967 */
1968 if (info->params.data_rate <= 460800)
Alan Cox8fb06c72008-07-16 21:56:46 +01001969 info->params.data_rate = tty_get_baud_rate(info->port.tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001970
1971 if ( info->params.data_rate ) {
1972 info->timeout = (32*HZ*bits_per_char) /
1973 info->params.data_rate;
1974 }
1975 info->timeout += HZ/50; /* Add .02 seconds of slop */
1976
1977 if (cflag & CRTSCTS)
Alan Cox8fb06c72008-07-16 21:56:46 +01001978 info->port.flags |= ASYNC_CTS_FLOW;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001979 else
Alan Cox8fb06c72008-07-16 21:56:46 +01001980 info->port.flags &= ~ASYNC_CTS_FLOW;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001981
1982 if (cflag & CLOCAL)
Alan Cox8fb06c72008-07-16 21:56:46 +01001983 info->port.flags &= ~ASYNC_CHECK_CD;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001984 else
Alan Cox8fb06c72008-07-16 21:56:46 +01001985 info->port.flags |= ASYNC_CHECK_CD;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001986
1987 /* process tty input control flags */
1988
1989 info->read_status_mask = RXSTATUS_OVERRUN;
Alan Cox8fb06c72008-07-16 21:56:46 +01001990 if (I_INPCK(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001991 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
Alan Cox8fb06c72008-07-16 21:56:46 +01001992 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001993 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
1994
Alan Cox8fb06c72008-07-16 21:56:46 +01001995 if (I_IGNPAR(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001996 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
Alan Cox8fb06c72008-07-16 21:56:46 +01001997 if (I_IGNBRK(info->port.tty)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001998 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
1999 /* If ignoring parity and break indicators, ignore
2000 * overruns too. (For real raw support).
2001 */
Alan Cox8fb06c72008-07-16 21:56:46 +01002002 if (I_IGNPAR(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002003 info->ignore_status_mask |= RXSTATUS_OVERRUN;
2004 }
2005
2006 mgsl_program_hw(info);
2007
2008} /* end of mgsl_change_params() */
2009
2010/* mgsl_put_char()
2011 *
2012 * Add a character to the transmit buffer.
2013 *
2014 * Arguments: tty pointer to tty information structure
2015 * ch character to add to transmit buffer
2016 *
2017 * Return Value: None
2018 */
Alan Cox55da7782008-04-30 00:54:07 -07002019static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002020{
Andrew Morton07648232008-05-01 04:35:18 -07002021 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002022 unsigned long flags;
Andrew Morton07648232008-05-01 04:35:18 -07002023 int ret = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002024
Andrew Morton07648232008-05-01 04:35:18 -07002025 if (debug_level >= DEBUG_LEVEL_INFO) {
Andrew Morton50980212008-05-01 04:35:19 -07002026 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
Andrew Morton07648232008-05-01 04:35:18 -07002027 __FILE__, __LINE__, ch, info->device_name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002028 }
2029
2030 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
Alan Cox55da7782008-04-30 00:54:07 -07002031 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002032
Jiri Slabyca1cce42010-01-10 12:30:16 +01002033 if (!info->xmit_buf)
Alan Cox55da7782008-04-30 00:54:07 -07002034 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002035
Andrew Morton07648232008-05-01 04:35:18 -07002036 spin_lock_irqsave(&info->irq_spinlock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002037
Andrew Morton07648232008-05-01 04:35:18 -07002038 if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002039 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2040 info->xmit_buf[info->xmit_head++] = ch;
2041 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2042 info->xmit_cnt++;
Alan Cox55da7782008-04-30 00:54:07 -07002043 ret = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002044 }
2045 }
Andrew Morton07648232008-05-01 04:35:18 -07002046 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Alan Cox55da7782008-04-30 00:54:07 -07002047 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002048
2049} /* end of mgsl_put_char() */
2050
2051/* mgsl_flush_chars()
2052 *
2053 * Enable transmitter so remaining characters in the
2054 * transmit buffer are sent.
2055 *
2056 * Arguments: tty pointer to tty information structure
2057 * Return Value: None
2058 */
2059static void mgsl_flush_chars(struct tty_struct *tty)
2060{
Alan Coxc9f19e92009-01-02 13:47:26 +00002061 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002062 unsigned long flags;
2063
2064 if ( debug_level >= DEBUG_LEVEL_INFO )
2065 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2066 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2067
2068 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2069 return;
2070
2071 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2072 !info->xmit_buf)
2073 return;
2074
2075 if ( debug_level >= DEBUG_LEVEL_INFO )
2076 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2077 __FILE__,__LINE__,info->device_name );
2078
2079 spin_lock_irqsave(&info->irq_spinlock,flags);
2080
2081 if (!info->tx_active) {
2082 if ( (info->params.mode == MGSL_MODE_HDLC ||
2083 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2084 /* operating in synchronous (frame oriented) mode */
2085 /* copy data from circular xmit_buf to */
2086 /* transmit DMA buffer. */
2087 mgsl_load_tx_dma_buffer(info,
2088 info->xmit_buf,info->xmit_cnt);
2089 }
2090 usc_start_transmitter(info);
2091 }
2092
2093 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2094
2095} /* end of mgsl_flush_chars() */
2096
2097/* mgsl_write()
2098 *
2099 * Send a block of data
2100 *
2101 * Arguments:
2102 *
2103 * tty pointer to tty information structure
2104 * buf pointer to buffer containing send data
2105 * count size of send data in bytes
2106 *
2107 * Return Value: number of characters written
2108 */
2109static int mgsl_write(struct tty_struct * tty,
2110 const unsigned char *buf, int count)
2111{
2112 int c, ret = 0;
Alan Coxc9f19e92009-01-02 13:47:26 +00002113 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002114 unsigned long flags;
2115
2116 if ( debug_level >= DEBUG_LEVEL_INFO )
2117 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2118 __FILE__,__LINE__,info->device_name,count);
2119
2120 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2121 goto cleanup;
2122
Jiri Slabyca1cce42010-01-10 12:30:16 +01002123 if (!info->xmit_buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002124 goto cleanup;
2125
2126 if ( info->params.mode == MGSL_MODE_HDLC ||
2127 info->params.mode == MGSL_MODE_RAW ) {
2128 /* operating in synchronous (frame oriented) mode */
2129 /* operating in synchronous (frame oriented) mode */
2130 if (info->tx_active) {
2131
2132 if ( info->params.mode == MGSL_MODE_HDLC ) {
2133 ret = 0;
2134 goto cleanup;
2135 }
2136 /* transmitter is actively sending data -
2137 * if we have multiple transmit dma and
2138 * holding buffers, attempt to queue this
2139 * frame for transmission at a later time.
2140 */
2141 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2142 /* no tx holding buffers available */
2143 ret = 0;
2144 goto cleanup;
2145 }
2146
2147 /* queue transmit frame request */
2148 ret = count;
2149 save_tx_buffer_request(info,buf,count);
2150
2151 /* if we have sufficient tx dma buffers,
2152 * load the next buffered tx request
2153 */
2154 spin_lock_irqsave(&info->irq_spinlock,flags);
2155 load_next_tx_holding_buffer(info);
2156 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2157 goto cleanup;
2158 }
2159
2160 /* if operating in HDLC LoopMode and the adapter */
2161 /* has yet to be inserted into the loop, we can't */
2162 /* transmit */
2163
2164 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2165 !usc_loopmode_active(info) )
2166 {
2167 ret = 0;
2168 goto cleanup;
2169 }
2170
2171 if ( info->xmit_cnt ) {
2172 /* Send accumulated from send_char() calls */
2173 /* as frame and wait before accepting more data. */
2174 ret = 0;
2175
2176 /* copy data from circular xmit_buf to */
2177 /* transmit DMA buffer. */
2178 mgsl_load_tx_dma_buffer(info,
2179 info->xmit_buf,info->xmit_cnt);
2180 if ( debug_level >= DEBUG_LEVEL_INFO )
2181 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2182 __FILE__,__LINE__,info->device_name);
2183 } else {
2184 if ( debug_level >= DEBUG_LEVEL_INFO )
2185 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2186 __FILE__,__LINE__,info->device_name);
2187 ret = count;
2188 info->xmit_cnt = count;
2189 mgsl_load_tx_dma_buffer(info,buf,count);
2190 }
2191 } else {
2192 while (1) {
2193 spin_lock_irqsave(&info->irq_spinlock,flags);
2194 c = min_t(int, count,
2195 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2196 SERIAL_XMIT_SIZE - info->xmit_head));
2197 if (c <= 0) {
2198 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2199 break;
2200 }
2201 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2202 info->xmit_head = ((info->xmit_head + c) &
2203 (SERIAL_XMIT_SIZE-1));
2204 info->xmit_cnt += c;
2205 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2206 buf += c;
2207 count -= c;
2208 ret += c;
2209 }
2210 }
2211
2212 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2213 spin_lock_irqsave(&info->irq_spinlock,flags);
2214 if (!info->tx_active)
2215 usc_start_transmitter(info);
2216 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2217 }
2218cleanup:
2219 if ( debug_level >= DEBUG_LEVEL_INFO )
2220 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2221 __FILE__,__LINE__,info->device_name,ret);
2222
2223 return ret;
2224
2225} /* end of mgsl_write() */
2226
2227/* mgsl_write_room()
2228 *
2229 * Return the count of free bytes in transmit buffer
2230 *
2231 * Arguments: tty pointer to tty info structure
2232 * Return Value: None
2233 */
2234static int mgsl_write_room(struct tty_struct *tty)
2235{
Alan Coxc9f19e92009-01-02 13:47:26 +00002236 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002237 int ret;
2238
2239 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2240 return 0;
2241 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2242 if (ret < 0)
2243 ret = 0;
2244
2245 if (debug_level >= DEBUG_LEVEL_INFO)
2246 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2247 __FILE__,__LINE__, info->device_name,ret );
2248
2249 if ( info->params.mode == MGSL_MODE_HDLC ||
2250 info->params.mode == MGSL_MODE_RAW ) {
2251 /* operating in synchronous (frame oriented) mode */
2252 if ( info->tx_active )
2253 return 0;
2254 else
2255 return HDLC_MAX_FRAME_SIZE;
2256 }
2257
2258 return ret;
2259
2260} /* end of mgsl_write_room() */
2261
2262/* mgsl_chars_in_buffer()
2263 *
2264 * Return the count of bytes in transmit buffer
2265 *
2266 * Arguments: tty pointer to tty info structure
2267 * Return Value: None
2268 */
2269static int mgsl_chars_in_buffer(struct tty_struct *tty)
2270{
Alan Coxc9f19e92009-01-02 13:47:26 +00002271 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002272
2273 if (debug_level >= DEBUG_LEVEL_INFO)
2274 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2275 __FILE__,__LINE__, info->device_name );
2276
2277 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2278 return 0;
2279
2280 if (debug_level >= DEBUG_LEVEL_INFO)
2281 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2282 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2283
2284 if ( info->params.mode == MGSL_MODE_HDLC ||
2285 info->params.mode == MGSL_MODE_RAW ) {
2286 /* operating in synchronous (frame oriented) mode */
2287 if ( info->tx_active )
2288 return info->max_frame_size;
2289 else
2290 return 0;
2291 }
2292
2293 return info->xmit_cnt;
2294} /* end of mgsl_chars_in_buffer() */
2295
2296/* mgsl_flush_buffer()
2297 *
2298 * Discard all data in the send buffer
2299 *
2300 * Arguments: tty pointer to tty info structure
2301 * Return Value: None
2302 */
2303static void mgsl_flush_buffer(struct tty_struct *tty)
2304{
Alan Coxc9f19e92009-01-02 13:47:26 +00002305 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002306 unsigned long flags;
2307
2308 if (debug_level >= DEBUG_LEVEL_INFO)
2309 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2310 __FILE__,__LINE__, info->device_name );
2311
2312 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2313 return;
2314
2315 spin_lock_irqsave(&info->irq_spinlock,flags);
2316 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2317 del_timer(&info->tx_timer);
2318 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2319
Linus Torvalds1da177e2005-04-16 15:20:36 -07002320 tty_wakeup(tty);
2321}
2322
2323/* mgsl_send_xchar()
2324 *
2325 * Send a high-priority XON/XOFF character
2326 *
2327 * Arguments: tty pointer to tty info structure
2328 * ch character to send
2329 * Return Value: None
2330 */
2331static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2332{
Alan Coxc9f19e92009-01-02 13:47:26 +00002333 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002334 unsigned long flags;
2335
2336 if (debug_level >= DEBUG_LEVEL_INFO)
2337 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2338 __FILE__,__LINE__, info->device_name, ch );
2339
2340 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2341 return;
2342
2343 info->x_char = ch;
2344 if (ch) {
2345 /* Make sure transmit interrupts are on */
2346 spin_lock_irqsave(&info->irq_spinlock,flags);
2347 if (!info->tx_enabled)
2348 usc_start_transmitter(info);
2349 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2350 }
2351} /* end of mgsl_send_xchar() */
2352
2353/* mgsl_throttle()
2354 *
2355 * Signal remote device to throttle send data (our receive data)
2356 *
2357 * Arguments: tty pointer to tty info structure
2358 * Return Value: None
2359 */
2360static void mgsl_throttle(struct tty_struct * tty)
2361{
Alan Coxc9f19e92009-01-02 13:47:26 +00002362 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002363 unsigned long flags;
2364
2365 if (debug_level >= DEBUG_LEVEL_INFO)
2366 printk("%s(%d):mgsl_throttle(%s) entry\n",
2367 __FILE__,__LINE__, info->device_name );
2368
2369 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2370 return;
2371
2372 if (I_IXOFF(tty))
2373 mgsl_send_xchar(tty, STOP_CHAR(tty));
2374
2375 if (tty->termios->c_cflag & CRTSCTS) {
2376 spin_lock_irqsave(&info->irq_spinlock,flags);
2377 info->serial_signals &= ~SerialSignal_RTS;
2378 usc_set_serial_signals(info);
2379 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2380 }
2381} /* end of mgsl_throttle() */
2382
2383/* mgsl_unthrottle()
2384 *
2385 * Signal remote device to stop throttling send data (our receive data)
2386 *
2387 * Arguments: tty pointer to tty info structure
2388 * Return Value: None
2389 */
2390static void mgsl_unthrottle(struct tty_struct * tty)
2391{
Alan Coxc9f19e92009-01-02 13:47:26 +00002392 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002393 unsigned long flags;
2394
2395 if (debug_level >= DEBUG_LEVEL_INFO)
2396 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2397 __FILE__,__LINE__, info->device_name );
2398
2399 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2400 return;
2401
2402 if (I_IXOFF(tty)) {
2403 if (info->x_char)
2404 info->x_char = 0;
2405 else
2406 mgsl_send_xchar(tty, START_CHAR(tty));
2407 }
2408
2409 if (tty->termios->c_cflag & CRTSCTS) {
2410 spin_lock_irqsave(&info->irq_spinlock,flags);
2411 info->serial_signals |= SerialSignal_RTS;
2412 usc_set_serial_signals(info);
2413 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2414 }
2415
2416} /* end of mgsl_unthrottle() */
2417
2418/* mgsl_get_stats()
2419 *
2420 * get the current serial parameters information
2421 *
2422 * Arguments: info pointer to device instance data
2423 * user_icount pointer to buffer to hold returned stats
2424 *
2425 * Return Value: 0 if success, otherwise error code
2426 */
2427static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2428{
2429 int err;
2430
2431 if (debug_level >= DEBUG_LEVEL_INFO)
2432 printk("%s(%d):mgsl_get_params(%s)\n",
2433 __FILE__,__LINE__, info->device_name);
2434
Paul Fulghum96612392005-09-09 13:02:13 -07002435 if (!user_icount) {
2436 memset(&info->icount, 0, sizeof(info->icount));
2437 } else {
Alan Coxf6025012010-06-01 22:52:46 +02002438 mutex_lock(&info->port.mutex);
Paul Fulghum96612392005-09-09 13:02:13 -07002439 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
Alan Coxf6025012010-06-01 22:52:46 +02002440 mutex_unlock(&info->port.mutex);
Paul Fulghum96612392005-09-09 13:02:13 -07002441 if (err)
2442 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002443 }
2444
2445 return 0;
2446
2447} /* end of mgsl_get_stats() */
2448
2449/* mgsl_get_params()
2450 *
2451 * get the current serial parameters information
2452 *
2453 * Arguments: info pointer to device instance data
2454 * user_params pointer to buffer to hold returned params
2455 *
2456 * Return Value: 0 if success, otherwise error code
2457 */
2458static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2459{
2460 int err;
2461 if (debug_level >= DEBUG_LEVEL_INFO)
2462 printk("%s(%d):mgsl_get_params(%s)\n",
2463 __FILE__,__LINE__, info->device_name);
2464
Alan Coxf6025012010-06-01 22:52:46 +02002465 mutex_lock(&info->port.mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002466 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
Alan Coxf6025012010-06-01 22:52:46 +02002467 mutex_unlock(&info->port.mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002468 if (err) {
2469 if ( debug_level >= DEBUG_LEVEL_INFO )
2470 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2471 __FILE__,__LINE__,info->device_name);
2472 return -EFAULT;
2473 }
2474
2475 return 0;
2476
2477} /* end of mgsl_get_params() */
2478
2479/* mgsl_set_params()
2480 *
2481 * set the serial parameters
2482 *
2483 * Arguments:
2484 *
2485 * info pointer to device instance data
2486 * new_params user buffer containing new serial params
2487 *
2488 * Return Value: 0 if success, otherwise error code
2489 */
2490static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2491{
2492 unsigned long flags;
2493 MGSL_PARAMS tmp_params;
2494 int err;
2495
2496 if (debug_level >= DEBUG_LEVEL_INFO)
2497 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2498 info->device_name );
2499 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2500 if (err) {
2501 if ( debug_level >= DEBUG_LEVEL_INFO )
2502 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2503 __FILE__,__LINE__,info->device_name);
2504 return -EFAULT;
2505 }
2506
Alan Coxf6025012010-06-01 22:52:46 +02002507 mutex_lock(&info->port.mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002508 spin_lock_irqsave(&info->irq_spinlock,flags);
2509 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2510 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2511
2512 mgsl_change_params(info);
Alan Coxf6025012010-06-01 22:52:46 +02002513 mutex_unlock(&info->port.mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002514
2515 return 0;
2516
2517} /* end of mgsl_set_params() */
2518
2519/* mgsl_get_txidle()
2520 *
2521 * get the current transmit idle mode
2522 *
2523 * Arguments: info pointer to device instance data
2524 * idle_mode pointer to buffer to hold returned idle mode
2525 *
2526 * Return Value: 0 if success, otherwise error code
2527 */
2528static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2529{
2530 int err;
2531
2532 if (debug_level >= DEBUG_LEVEL_INFO)
2533 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2534 __FILE__,__LINE__, info->device_name, info->idle_mode);
2535
2536 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2537 if (err) {
2538 if ( debug_level >= DEBUG_LEVEL_INFO )
2539 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2540 __FILE__,__LINE__,info->device_name);
2541 return -EFAULT;
2542 }
2543
2544 return 0;
2545
2546} /* end of mgsl_get_txidle() */
2547
2548/* mgsl_set_txidle() service ioctl to set transmit idle mode
2549 *
2550 * Arguments: info pointer to device instance data
2551 * idle_mode new idle mode
2552 *
2553 * Return Value: 0 if success, otherwise error code
2554 */
2555static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2556{
2557 unsigned long flags;
2558
2559 if (debug_level >= DEBUG_LEVEL_INFO)
2560 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2561 info->device_name, idle_mode );
2562
2563 spin_lock_irqsave(&info->irq_spinlock,flags);
2564 info->idle_mode = idle_mode;
2565 usc_set_txidle( info );
2566 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2567 return 0;
2568
2569} /* end of mgsl_set_txidle() */
2570
2571/* mgsl_txenable()
2572 *
2573 * enable or disable the transmitter
2574 *
2575 * Arguments:
2576 *
2577 * info pointer to device instance data
2578 * enable 1 = enable, 0 = disable
2579 *
2580 * Return Value: 0 if success, otherwise error code
2581 */
2582static int mgsl_txenable(struct mgsl_struct * info, int enable)
2583{
2584 unsigned long flags;
2585
2586 if (debug_level >= DEBUG_LEVEL_INFO)
2587 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2588 info->device_name, enable);
2589
2590 spin_lock_irqsave(&info->irq_spinlock,flags);
2591 if ( enable ) {
2592 if ( !info->tx_enabled ) {
2593
2594 usc_start_transmitter(info);
2595 /*--------------------------------------------------
2596 * if HDLC/SDLC Loop mode, attempt to insert the
2597 * station in the 'loop' by setting CMR:13. Upon
2598 * receipt of the next GoAhead (RxAbort) sequence,
2599 * the OnLoop indicator (CCSR:7) should go active
2600 * to indicate that we are on the loop
2601 *--------------------------------------------------*/
2602 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2603 usc_loopmode_insert_request( info );
2604 }
2605 } else {
2606 if ( info->tx_enabled )
2607 usc_stop_transmitter(info);
2608 }
2609 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2610 return 0;
2611
2612} /* end of mgsl_txenable() */
2613
2614/* mgsl_txabort() abort send HDLC frame
2615 *
2616 * Arguments: info pointer to device instance data
2617 * Return Value: 0 if success, otherwise error code
2618 */
2619static int mgsl_txabort(struct mgsl_struct * info)
2620{
2621 unsigned long flags;
2622
2623 if (debug_level >= DEBUG_LEVEL_INFO)
2624 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2625 info->device_name);
2626
2627 spin_lock_irqsave(&info->irq_spinlock,flags);
2628 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2629 {
2630 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2631 usc_loopmode_cancel_transmit( info );
2632 else
2633 usc_TCmd(info,TCmd_SendAbort);
2634 }
2635 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2636 return 0;
2637
2638} /* end of mgsl_txabort() */
2639
2640/* mgsl_rxenable() enable or disable the receiver
2641 *
2642 * Arguments: info pointer to device instance data
2643 * enable 1 = enable, 0 = disable
2644 * Return Value: 0 if success, otherwise error code
2645 */
2646static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2647{
2648 unsigned long flags;
2649
2650 if (debug_level >= DEBUG_LEVEL_INFO)
2651 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2652 info->device_name, enable);
2653
2654 spin_lock_irqsave(&info->irq_spinlock,flags);
2655 if ( enable ) {
2656 if ( !info->rx_enabled )
2657 usc_start_receiver(info);
2658 } else {
2659 if ( info->rx_enabled )
2660 usc_stop_receiver(info);
2661 }
2662 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2663 return 0;
2664
2665} /* end of mgsl_rxenable() */
2666
2667/* mgsl_wait_event() wait for specified event to occur
2668 *
2669 * Arguments: info pointer to device instance data
2670 * mask pointer to bitmask of events to wait for
2671 * Return Value: 0 if successful and bit mask updated with
2672 * of events triggerred,
2673 * otherwise error code
2674 */
2675static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2676{
2677 unsigned long flags;
2678 int s;
2679 int rc=0;
2680 struct mgsl_icount cprev, cnow;
2681 int events;
2682 int mask;
2683 struct _input_signal_events oldsigs, newsigs;
2684 DECLARE_WAITQUEUE(wait, current);
2685
2686 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2687 if (rc) {
2688 return -EFAULT;
2689 }
2690
2691 if (debug_level >= DEBUG_LEVEL_INFO)
2692 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2693 info->device_name, mask);
2694
2695 spin_lock_irqsave(&info->irq_spinlock,flags);
2696
2697 /* return immediately if state matches requested events */
2698 usc_get_serial_signals(info);
2699 s = info->serial_signals;
2700 events = mask &
2701 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2702 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2703 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2704 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2705 if (events) {
2706 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2707 goto exit;
2708 }
2709
2710 /* save current irq counts */
2711 cprev = info->icount;
2712 oldsigs = info->input_signal_events;
2713
2714 /* enable hunt and idle irqs if needed */
2715 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2716 u16 oldreg = usc_InReg(info,RICR);
2717 u16 newreg = oldreg +
2718 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2719 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2720 if (oldreg != newreg)
2721 usc_OutReg(info, RICR, newreg);
2722 }
2723
2724 set_current_state(TASK_INTERRUPTIBLE);
2725 add_wait_queue(&info->event_wait_q, &wait);
2726
2727 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2728
2729
2730 for(;;) {
2731 schedule();
2732 if (signal_pending(current)) {
2733 rc = -ERESTARTSYS;
2734 break;
2735 }
2736
2737 /* get current irq counts */
2738 spin_lock_irqsave(&info->irq_spinlock,flags);
2739 cnow = info->icount;
2740 newsigs = info->input_signal_events;
2741 set_current_state(TASK_INTERRUPTIBLE);
2742 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2743
2744 /* if no change, wait aborted for some reason */
2745 if (newsigs.dsr_up == oldsigs.dsr_up &&
2746 newsigs.dsr_down == oldsigs.dsr_down &&
2747 newsigs.dcd_up == oldsigs.dcd_up &&
2748 newsigs.dcd_down == oldsigs.dcd_down &&
2749 newsigs.cts_up == oldsigs.cts_up &&
2750 newsigs.cts_down == oldsigs.cts_down &&
2751 newsigs.ri_up == oldsigs.ri_up &&
2752 newsigs.ri_down == oldsigs.ri_down &&
2753 cnow.exithunt == cprev.exithunt &&
2754 cnow.rxidle == cprev.rxidle) {
2755 rc = -EIO;
2756 break;
2757 }
2758
2759 events = mask &
2760 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2761 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2762 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2763 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2764 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2765 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2766 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2767 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2768 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2769 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2770 if (events)
2771 break;
2772
2773 cprev = cnow;
2774 oldsigs = newsigs;
2775 }
2776
2777 remove_wait_queue(&info->event_wait_q, &wait);
2778 set_current_state(TASK_RUNNING);
2779
2780 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2781 spin_lock_irqsave(&info->irq_spinlock,flags);
2782 if (!waitqueue_active(&info->event_wait_q)) {
2783 /* disable enable exit hunt mode/idle rcvd IRQs */
2784 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2785 ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
2786 }
2787 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2788 }
2789exit:
2790 if ( rc == 0 )
2791 PUT_USER(rc, events, mask_ptr);
2792
2793 return rc;
2794
2795} /* end of mgsl_wait_event() */
2796
2797static int modem_input_wait(struct mgsl_struct *info,int arg)
2798{
2799 unsigned long flags;
2800 int rc;
2801 struct mgsl_icount cprev, cnow;
2802 DECLARE_WAITQUEUE(wait, current);
2803
2804 /* save current irq counts */
2805 spin_lock_irqsave(&info->irq_spinlock,flags);
2806 cprev = info->icount;
2807 add_wait_queue(&info->status_event_wait_q, &wait);
2808 set_current_state(TASK_INTERRUPTIBLE);
2809 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2810
2811 for(;;) {
2812 schedule();
2813 if (signal_pending(current)) {
2814 rc = -ERESTARTSYS;
2815 break;
2816 }
2817
2818 /* get new irq counts */
2819 spin_lock_irqsave(&info->irq_spinlock,flags);
2820 cnow = info->icount;
2821 set_current_state(TASK_INTERRUPTIBLE);
2822 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2823
2824 /* if no change, wait aborted for some reason */
2825 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2826 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2827 rc = -EIO;
2828 break;
2829 }
2830
2831 /* check for change in caller specified modem input */
2832 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2833 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2834 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2835 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2836 rc = 0;
2837 break;
2838 }
2839
2840 cprev = cnow;
2841 }
2842 remove_wait_queue(&info->status_event_wait_q, &wait);
2843 set_current_state(TASK_RUNNING);
2844 return rc;
2845}
2846
2847/* return the state of the serial control and status signals
2848 */
2849static int tiocmget(struct tty_struct *tty, struct file *file)
2850{
Alan Coxc9f19e92009-01-02 13:47:26 +00002851 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002852 unsigned int result;
2853 unsigned long flags;
2854
2855 spin_lock_irqsave(&info->irq_spinlock,flags);
2856 usc_get_serial_signals(info);
2857 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2858
2859 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2860 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2861 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2862 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2863 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2864 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2865
2866 if (debug_level >= DEBUG_LEVEL_INFO)
2867 printk("%s(%d):%s tiocmget() value=%08X\n",
2868 __FILE__,__LINE__, info->device_name, result );
2869 return result;
2870}
2871
2872/* set modem control signals (DTR/RTS)
2873 */
2874static int tiocmset(struct tty_struct *tty, struct file *file,
2875 unsigned int set, unsigned int clear)
2876{
Alan Coxc9f19e92009-01-02 13:47:26 +00002877 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002878 unsigned long flags;
2879
2880 if (debug_level >= DEBUG_LEVEL_INFO)
2881 printk("%s(%d):%s tiocmset(%x,%x)\n",
2882 __FILE__,__LINE__,info->device_name, set, clear);
2883
2884 if (set & TIOCM_RTS)
2885 info->serial_signals |= SerialSignal_RTS;
2886 if (set & TIOCM_DTR)
2887 info->serial_signals |= SerialSignal_DTR;
2888 if (clear & TIOCM_RTS)
2889 info->serial_signals &= ~SerialSignal_RTS;
2890 if (clear & TIOCM_DTR)
2891 info->serial_signals &= ~SerialSignal_DTR;
2892
2893 spin_lock_irqsave(&info->irq_spinlock,flags);
2894 usc_set_serial_signals(info);
2895 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2896
2897 return 0;
2898}
2899
2900/* mgsl_break() Set or clear transmit break condition
2901 *
2902 * Arguments: tty pointer to tty instance data
2903 * break_state -1=set break condition, 0=clear
Alan Cox9e989662008-07-22 11:18:03 +01002904 * Return Value: error code
Linus Torvalds1da177e2005-04-16 15:20:36 -07002905 */
Alan Cox9e989662008-07-22 11:18:03 +01002906static int mgsl_break(struct tty_struct *tty, int break_state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002907{
Alan Coxc9f19e92009-01-02 13:47:26 +00002908 struct mgsl_struct * info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002909 unsigned long flags;
2910
2911 if (debug_level >= DEBUG_LEVEL_INFO)
2912 printk("%s(%d):mgsl_break(%s,%d)\n",
2913 __FILE__,__LINE__, info->device_name, break_state);
2914
2915 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
Alan Cox9e989662008-07-22 11:18:03 +01002916 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002917
2918 spin_lock_irqsave(&info->irq_spinlock,flags);
2919 if (break_state == -1)
2920 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2921 else
2922 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2923 spin_unlock_irqrestore(&info->irq_spinlock,flags);
Alan Cox9e989662008-07-22 11:18:03 +01002924 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002925
2926} /* end of mgsl_break() */
2927
Alan Cox05871022010-09-16 18:21:52 +01002928/*
2929 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2930 * Return: write counters to the user passed counter struct
2931 * NB: both 1->0 and 0->1 transitions are counted except for
2932 * RI where only 0->1 is counted.
2933 */
2934static int msgl_get_icount(struct tty_struct *tty,
2935 struct serial_icounter_struct *icount)
2936
2937{
2938 struct mgsl_struct * info = tty->driver_data;
2939 struct mgsl_icount cnow; /* kernel counter temps */
2940 unsigned long flags;
2941
2942 spin_lock_irqsave(&info->irq_spinlock,flags);
2943 cnow = info->icount;
2944 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2945
2946 icount->cts = cnow.cts;
2947 icount->dsr = cnow.dsr;
2948 icount->rng = cnow.rng;
2949 icount->dcd = cnow.dcd;
2950 icount->rx = cnow.rx;
2951 icount->tx = cnow.tx;
2952 icount->frame = cnow.frame;
2953 icount->overrun = cnow.overrun;
2954 icount->parity = cnow.parity;
2955 icount->brk = cnow.brk;
2956 icount->buf_overrun = cnow.buf_overrun;
2957 return 0;
2958}
2959
Linus Torvalds1da177e2005-04-16 15:20:36 -07002960/* mgsl_ioctl() Service an IOCTL request
2961 *
2962 * Arguments:
2963 *
2964 * tty pointer to tty instance data
2965 * file pointer to associated file object for device
2966 * cmd IOCTL command code
2967 * arg command argument/context
2968 *
2969 * Return Value: 0 if success, otherwise error code
2970 */
2971static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
2972 unsigned int cmd, unsigned long arg)
2973{
Alan Coxc9f19e92009-01-02 13:47:26 +00002974 struct mgsl_struct * info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002975
2976 if (debug_level >= DEBUG_LEVEL_INFO)
2977 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2978 info->device_name, cmd );
2979
2980 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2981 return -ENODEV;
2982
2983 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
Alan Cox05871022010-09-16 18:21:52 +01002984 (cmd != TIOCMIWAIT)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002985 if (tty->flags & (1 << TTY_IO_ERROR))
2986 return -EIO;
2987 }
2988
Alan Coxf6025012010-06-01 22:52:46 +02002989 return mgsl_ioctl_common(info, cmd, arg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002990}
2991
2992static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2993{
Linus Torvalds1da177e2005-04-16 15:20:36 -07002994 void __user *argp = (void __user *)arg;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002995
2996 switch (cmd) {
2997 case MGSL_IOCGPARAMS:
2998 return mgsl_get_params(info, argp);
2999 case MGSL_IOCSPARAMS:
3000 return mgsl_set_params(info, argp);
3001 case MGSL_IOCGTXIDLE:
3002 return mgsl_get_txidle(info, argp);
3003 case MGSL_IOCSTXIDLE:
3004 return mgsl_set_txidle(info,(int)arg);
3005 case MGSL_IOCTXENABLE:
3006 return mgsl_txenable(info,(int)arg);
3007 case MGSL_IOCRXENABLE:
3008 return mgsl_rxenable(info,(int)arg);
3009 case MGSL_IOCTXABORT:
3010 return mgsl_txabort(info);
3011 case MGSL_IOCGSTATS:
3012 return mgsl_get_stats(info, argp);
3013 case MGSL_IOCWAITEVENT:
3014 return mgsl_wait_event(info, argp);
3015 case MGSL_IOCLOOPTXDONE:
3016 return mgsl_loopmode_send_done(info);
3017 /* Wait for modem input (DCD,RI,DSR,CTS) change
3018 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
3019 */
3020 case TIOCMIWAIT:
3021 return modem_input_wait(info,(int)arg);
3022
Linus Torvalds1da177e2005-04-16 15:20:36 -07003023 default:
3024 return -ENOIOCTLCMD;
3025 }
3026 return 0;
3027}
3028
3029/* mgsl_set_termios()
3030 *
3031 * Set new termios settings
3032 *
3033 * Arguments:
3034 *
3035 * tty pointer to tty structure
3036 * termios pointer to buffer to hold returned old termios
3037 *
3038 * Return Value: None
3039 */
Alan Cox606d0992006-12-08 02:38:45 -08003040static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003041{
Alan Coxc9f19e92009-01-02 13:47:26 +00003042 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003043 unsigned long flags;
3044
3045 if (debug_level >= DEBUG_LEVEL_INFO)
3046 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3047 tty->driver->name );
3048
Linus Torvalds1da177e2005-04-16 15:20:36 -07003049 mgsl_change_params(info);
3050
3051 /* Handle transition to B0 status */
3052 if (old_termios->c_cflag & CBAUD &&
3053 !(tty->termios->c_cflag & CBAUD)) {
3054 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3055 spin_lock_irqsave(&info->irq_spinlock,flags);
3056 usc_set_serial_signals(info);
3057 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3058 }
3059
3060 /* Handle transition away from B0 status */
3061 if (!(old_termios->c_cflag & CBAUD) &&
3062 tty->termios->c_cflag & CBAUD) {
3063 info->serial_signals |= SerialSignal_DTR;
3064 if (!(tty->termios->c_cflag & CRTSCTS) ||
3065 !test_bit(TTY_THROTTLED, &tty->flags)) {
3066 info->serial_signals |= SerialSignal_RTS;
3067 }
3068 spin_lock_irqsave(&info->irq_spinlock,flags);
3069 usc_set_serial_signals(info);
3070 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3071 }
3072
3073 /* Handle turning off CRTSCTS */
3074 if (old_termios->c_cflag & CRTSCTS &&
3075 !(tty->termios->c_cflag & CRTSCTS)) {
3076 tty->hw_stopped = 0;
3077 mgsl_start(tty);
3078 }
3079
3080} /* end of mgsl_set_termios() */
3081
3082/* mgsl_close()
3083 *
3084 * Called when port is closed. Wait for remaining data to be
3085 * sent. Disable port and free resources.
3086 *
3087 * Arguments:
3088 *
3089 * tty pointer to open tty structure
3090 * filp pointer to open file object
3091 *
3092 * Return Value: None
3093 */
3094static void mgsl_close(struct tty_struct *tty, struct file * filp)
3095{
Alan Coxc9f19e92009-01-02 13:47:26 +00003096 struct mgsl_struct * info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003097
3098 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3099 return;
3100
3101 if (debug_level >= DEBUG_LEVEL_INFO)
3102 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003103 __FILE__,__LINE__, info->device_name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003104
Alan Coxa6614992009-01-02 13:46:50 +00003105 if (tty_port_close_start(&info->port, tty, filp) == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003106 goto cleanup;
Alan Coxf6025012010-06-01 22:52:46 +02003107
3108 mutex_lock(&info->port.mutex);
Alan Cox8fb06c72008-07-16 21:56:46 +01003109 if (info->port.flags & ASYNC_INITIALIZED)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003110 mgsl_wait_until_sent(tty, info->timeout);
Alan Cox978e5952008-04-30 00:53:59 -07003111 mgsl_flush_buffer(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003112 tty_ldisc_flush(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003113 shutdown(info);
Alan Coxf6025012010-06-01 22:52:46 +02003114 mutex_unlock(&info->port.mutex);
Alan Coxa6614992009-01-02 13:46:50 +00003115
3116 tty_port_close_end(&info->port, tty);
Alan Cox8fb06c72008-07-16 21:56:46 +01003117 info->port.tty = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003118cleanup:
3119 if (debug_level >= DEBUG_LEVEL_INFO)
3120 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
Alan Cox8fb06c72008-07-16 21:56:46 +01003121 tty->driver->name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003122
3123} /* end of mgsl_close() */
3124
3125/* mgsl_wait_until_sent()
3126 *
3127 * Wait until the transmitter is empty.
3128 *
3129 * Arguments:
3130 *
3131 * tty pointer to tty info structure
3132 * timeout time to wait for send completion
3133 *
3134 * Return Value: None
3135 */
3136static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3137{
Alan Coxc9f19e92009-01-02 13:47:26 +00003138 struct mgsl_struct * info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003139 unsigned long orig_jiffies, char_time;
3140
3141 if (!info )
3142 return;
3143
3144 if (debug_level >= DEBUG_LEVEL_INFO)
3145 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3146 __FILE__,__LINE__, info->device_name );
3147
3148 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3149 return;
3150
Alan Cox8fb06c72008-07-16 21:56:46 +01003151 if (!(info->port.flags & ASYNC_INITIALIZED))
Linus Torvalds1da177e2005-04-16 15:20:36 -07003152 goto exit;
3153
3154 orig_jiffies = jiffies;
3155
3156 /* Set check interval to 1/5 of estimated time to
3157 * send a character, and make it at least 1. The check
3158 * interval should also be less than the timeout.
3159 * Note: use tight timings here to satisfy the NIST-PCTS.
3160 */
Alan Cox978e5952008-04-30 00:53:59 -07003161
Linus Torvalds1da177e2005-04-16 15:20:36 -07003162 if ( info->params.data_rate ) {
3163 char_time = info->timeout/(32 * 5);
3164 if (!char_time)
3165 char_time++;
3166 } else
3167 char_time = 1;
3168
3169 if (timeout)
3170 char_time = min_t(unsigned long, char_time, timeout);
3171
3172 if ( info->params.mode == MGSL_MODE_HDLC ||
3173 info->params.mode == MGSL_MODE_RAW ) {
3174 while (info->tx_active) {
3175 msleep_interruptible(jiffies_to_msecs(char_time));
3176 if (signal_pending(current))
3177 break;
3178 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3179 break;
3180 }
3181 } else {
3182 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3183 info->tx_enabled) {
3184 msleep_interruptible(jiffies_to_msecs(char_time));
3185 if (signal_pending(current))
3186 break;
3187 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3188 break;
3189 }
3190 }
3191
3192exit:
3193 if (debug_level >= DEBUG_LEVEL_INFO)
3194 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3195 __FILE__,__LINE__, info->device_name );
3196
3197} /* end of mgsl_wait_until_sent() */
3198
3199/* mgsl_hangup()
3200 *
3201 * Called by tty_hangup() when a hangup is signaled.
3202 * This is the same as to closing all open files for the port.
3203 *
3204 * Arguments: tty pointer to associated tty object
3205 * Return Value: None
3206 */
3207static void mgsl_hangup(struct tty_struct *tty)
3208{
Alan Coxc9f19e92009-01-02 13:47:26 +00003209 struct mgsl_struct * info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003210
3211 if (debug_level >= DEBUG_LEVEL_INFO)
3212 printk("%s(%d):mgsl_hangup(%s)\n",
3213 __FILE__,__LINE__, info->device_name );
3214
3215 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3216 return;
3217
3218 mgsl_flush_buffer(tty);
3219 shutdown(info);
3220
Alan Cox8fb06c72008-07-16 21:56:46 +01003221 info->port.count = 0;
3222 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
3223 info->port.tty = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003224
Alan Cox8fb06c72008-07-16 21:56:46 +01003225 wake_up_interruptible(&info->port.open_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003226
3227} /* end of mgsl_hangup() */
3228
Alan Cox31f35932009-01-02 13:45:05 +00003229/*
3230 * carrier_raised()
3231 *
3232 * Return true if carrier is raised
3233 */
3234
3235static int carrier_raised(struct tty_port *port)
3236{
3237 unsigned long flags;
3238 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3239
3240 spin_lock_irqsave(&info->irq_spinlock, flags);
3241 usc_get_serial_signals(info);
3242 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3243 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3244}
3245
Alan Coxfcc8ac12009-06-11 12:24:17 +01003246static void dtr_rts(struct tty_port *port, int on)
Alan Cox5d951fb2009-01-02 13:45:19 +00003247{
3248 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3249 unsigned long flags;
3250
3251 spin_lock_irqsave(&info->irq_spinlock,flags);
Alan Coxfcc8ac12009-06-11 12:24:17 +01003252 if (on)
3253 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3254 else
3255 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
Alan Cox5d951fb2009-01-02 13:45:19 +00003256 usc_set_serial_signals(info);
3257 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3258}
3259
3260
Linus Torvalds1da177e2005-04-16 15:20:36 -07003261/* block_til_ready()
3262 *
3263 * Block the current process until the specified port
3264 * is ready to be opened.
3265 *
3266 * Arguments:
3267 *
3268 * tty pointer to tty info structure
3269 * filp pointer to open file object
3270 * info pointer to device instance data
3271 *
3272 * Return Value: 0 if success, otherwise error code
3273 */
3274static int block_til_ready(struct tty_struct *tty, struct file * filp,
3275 struct mgsl_struct *info)
3276{
3277 DECLARE_WAITQUEUE(wait, current);
3278 int retval;
Joe Perches0fab6de2008-04-28 02:14:02 -07003279 bool do_clocal = false;
3280 bool extra_count = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003281 unsigned long flags;
Alan Cox31f35932009-01-02 13:45:05 +00003282 int dcd;
3283 struct tty_port *port = &info->port;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003284
3285 if (debug_level >= DEBUG_LEVEL_INFO)
3286 printk("%s(%d):block_til_ready on %s\n",
3287 __FILE__,__LINE__, tty->driver->name );
3288
3289 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3290 /* nonblock mode is set or port is not enabled */
Alan Cox31f35932009-01-02 13:45:05 +00003291 port->flags |= ASYNC_NORMAL_ACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003292 return 0;
3293 }
3294
3295 if (tty->termios->c_cflag & CLOCAL)
Joe Perches0fab6de2008-04-28 02:14:02 -07003296 do_clocal = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003297
3298 /* Wait for carrier detect and the line to become
3299 * free (i.e., not in use by the callout). While we are in
Alan Cox31f35932009-01-02 13:45:05 +00003300 * this loop, port->count is dropped by one, so that
Linus Torvalds1da177e2005-04-16 15:20:36 -07003301 * mgsl_close() knows when to free things. We restore it upon
3302 * exit, either normal or abnormal.
3303 */
3304
3305 retval = 0;
Alan Cox31f35932009-01-02 13:45:05 +00003306 add_wait_queue(&port->open_wait, &wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003307
3308 if (debug_level >= DEBUG_LEVEL_INFO)
3309 printk("%s(%d):block_til_ready before block on %s count=%d\n",
Alan Cox31f35932009-01-02 13:45:05 +00003310 __FILE__,__LINE__, tty->driver->name, port->count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003311
3312 spin_lock_irqsave(&info->irq_spinlock, flags);
3313 if (!tty_hung_up_p(filp)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07003314 extra_count = true;
Alan Cox31f35932009-01-02 13:45:05 +00003315 port->count--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003316 }
3317 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Alan Cox31f35932009-01-02 13:45:05 +00003318 port->blocked_open++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003319
3320 while (1) {
Alan Cox5d951fb2009-01-02 13:45:19 +00003321 if (tty->termios->c_cflag & CBAUD)
3322 tty_port_raise_dtr_rts(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003323
3324 set_current_state(TASK_INTERRUPTIBLE);
3325
Alan Cox31f35932009-01-02 13:45:05 +00003326 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3327 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
Linus Torvalds1da177e2005-04-16 15:20:36 -07003328 -EAGAIN : -ERESTARTSYS;
3329 break;
3330 }
3331
Alan Cox31f35932009-01-02 13:45:05 +00003332 dcd = tty_port_carrier_raised(&info->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003333
Alan Cox31f35932009-01-02 13:45:05 +00003334 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
Linus Torvalds1da177e2005-04-16 15:20:36 -07003335 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003336
3337 if (signal_pending(current)) {
3338 retval = -ERESTARTSYS;
3339 break;
3340 }
3341
3342 if (debug_level >= DEBUG_LEVEL_INFO)
3343 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
Alan Cox31f35932009-01-02 13:45:05 +00003344 __FILE__,__LINE__, tty->driver->name, port->count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003345
Arnd Bergmanne142a312010-06-01 22:53:10 +02003346 tty_unlock();
Linus Torvalds1da177e2005-04-16 15:20:36 -07003347 schedule();
Arnd Bergmanne142a312010-06-01 22:53:10 +02003348 tty_lock();
Linus Torvalds1da177e2005-04-16 15:20:36 -07003349 }
3350
3351 set_current_state(TASK_RUNNING);
Alan Cox31f35932009-01-02 13:45:05 +00003352 remove_wait_queue(&port->open_wait, &wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003353
Alan Cox36c621d2009-01-02 13:46:10 +00003354 /* FIXME: Racy on hangup during close wait */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003355 if (extra_count)
Alan Cox31f35932009-01-02 13:45:05 +00003356 port->count++;
3357 port->blocked_open--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003358
3359 if (debug_level >= DEBUG_LEVEL_INFO)
3360 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
Alan Cox31f35932009-01-02 13:45:05 +00003361 __FILE__,__LINE__, tty->driver->name, port->count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003362
3363 if (!retval)
Alan Cox31f35932009-01-02 13:45:05 +00003364 port->flags |= ASYNC_NORMAL_ACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003365
3366 return retval;
3367
3368} /* end of block_til_ready() */
3369
3370/* mgsl_open()
3371 *
3372 * Called when a port is opened. Init and enable port.
3373 * Perform serial-specific initialization for the tty structure.
3374 *
3375 * Arguments: tty pointer to tty info structure
3376 * filp associated file pointer
3377 *
3378 * Return Value: 0 if success, otherwise error code
3379 */
3380static int mgsl_open(struct tty_struct *tty, struct file * filp)
3381{
3382 struct mgsl_struct *info;
3383 int retval, line;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003384 unsigned long flags;
3385
3386 /* verify range of specified line number */
3387 line = tty->index;
3388 if ((line < 0) || (line >= mgsl_device_count)) {
3389 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3390 __FILE__,__LINE__,line);
3391 return -ENODEV;
3392 }
3393
3394 /* find the info structure for the specified line */
3395 info = mgsl_device_list;
3396 while(info && info->line != line)
3397 info = info->next_device;
3398 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3399 return -ENODEV;
3400
3401 tty->driver_data = info;
Alan Cox8fb06c72008-07-16 21:56:46 +01003402 info->port.tty = tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003403
3404 if (debug_level >= DEBUG_LEVEL_INFO)
3405 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003406 __FILE__,__LINE__,tty->driver->name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003407
3408 /* If port is closing, signal caller to try again */
Alan Cox8fb06c72008-07-16 21:56:46 +01003409 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
3410 if (info->port.flags & ASYNC_CLOSING)
3411 interruptible_sleep_on(&info->port.close_wait);
3412 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
Linus Torvalds1da177e2005-04-16 15:20:36 -07003413 -EAGAIN : -ERESTARTSYS);
3414 goto cleanup;
3415 }
3416
Alan Cox8fb06c72008-07-16 21:56:46 +01003417 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003418
3419 spin_lock_irqsave(&info->netlock, flags);
3420 if (info->netcount) {
3421 retval = -EBUSY;
3422 spin_unlock_irqrestore(&info->netlock, flags);
3423 goto cleanup;
3424 }
Alan Cox8fb06c72008-07-16 21:56:46 +01003425 info->port.count++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003426 spin_unlock_irqrestore(&info->netlock, flags);
3427
Alan Cox8fb06c72008-07-16 21:56:46 +01003428 if (info->port.count == 1) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003429 /* 1st open on this device, init hardware */
3430 retval = startup(info);
3431 if (retval < 0)
3432 goto cleanup;
3433 }
3434
3435 retval = block_til_ready(tty, filp, info);
3436 if (retval) {
3437 if (debug_level >= DEBUG_LEVEL_INFO)
3438 printk("%s(%d):block_til_ready(%s) returned %d\n",
3439 __FILE__,__LINE__, info->device_name, retval);
3440 goto cleanup;
3441 }
3442
3443 if (debug_level >= DEBUG_LEVEL_INFO)
3444 printk("%s(%d):mgsl_open(%s) success\n",
3445 __FILE__,__LINE__, info->device_name);
3446 retval = 0;
3447
3448cleanup:
3449 if (retval) {
3450 if (tty->count == 1)
Alan Cox8fb06c72008-07-16 21:56:46 +01003451 info->port.tty = NULL; /* tty layer will release tty struct */
3452 if(info->port.count)
3453 info->port.count--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003454 }
3455
3456 return retval;
3457
3458} /* end of mgsl_open() */
3459
3460/*
3461 * /proc fs routines....
3462 */
3463
Alexey Dobriyand3378292009-03-31 15:19:18 -07003464static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003465{
3466 char stat_buf[30];
Linus Torvalds1da177e2005-04-16 15:20:36 -07003467 unsigned long flags;
3468
3469 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
Alexey Dobriyand3378292009-03-31 15:19:18 -07003470 seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
Linus Torvalds1da177e2005-04-16 15:20:36 -07003471 info->device_name, info->io_base, info->irq_level,
3472 info->phys_memory_base, info->phys_lcr_base);
3473 } else {
Alexey Dobriyand3378292009-03-31 15:19:18 -07003474 seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
Linus Torvalds1da177e2005-04-16 15:20:36 -07003475 info->device_name, info->io_base,
3476 info->irq_level, info->dma_level);
3477 }
3478
3479 /* output current serial signal states */
3480 spin_lock_irqsave(&info->irq_spinlock,flags);
3481 usc_get_serial_signals(info);
3482 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3483
3484 stat_buf[0] = 0;
3485 stat_buf[1] = 0;
3486 if (info->serial_signals & SerialSignal_RTS)
3487 strcat(stat_buf, "|RTS");
3488 if (info->serial_signals & SerialSignal_CTS)
3489 strcat(stat_buf, "|CTS");
3490 if (info->serial_signals & SerialSignal_DTR)
3491 strcat(stat_buf, "|DTR");
3492 if (info->serial_signals & SerialSignal_DSR)
3493 strcat(stat_buf, "|DSR");
3494 if (info->serial_signals & SerialSignal_DCD)
3495 strcat(stat_buf, "|CD");
3496 if (info->serial_signals & SerialSignal_RI)
3497 strcat(stat_buf, "|RI");
3498
3499 if (info->params.mode == MGSL_MODE_HDLC ||
3500 info->params.mode == MGSL_MODE_RAW ) {
Alexey Dobriyand3378292009-03-31 15:19:18 -07003501 seq_printf(m, " HDLC txok:%d rxok:%d",
Linus Torvalds1da177e2005-04-16 15:20:36 -07003502 info->icount.txok, info->icount.rxok);
3503 if (info->icount.txunder)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003504 seq_printf(m, " txunder:%d", info->icount.txunder);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003505 if (info->icount.txabort)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003506 seq_printf(m, " txabort:%d", info->icount.txabort);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003507 if (info->icount.rxshort)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003508 seq_printf(m, " rxshort:%d", info->icount.rxshort);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003509 if (info->icount.rxlong)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003510 seq_printf(m, " rxlong:%d", info->icount.rxlong);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003511 if (info->icount.rxover)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003512 seq_printf(m, " rxover:%d", info->icount.rxover);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003513 if (info->icount.rxcrc)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003514 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003515 } else {
Alexey Dobriyand3378292009-03-31 15:19:18 -07003516 seq_printf(m, " ASYNC tx:%d rx:%d",
Linus Torvalds1da177e2005-04-16 15:20:36 -07003517 info->icount.tx, info->icount.rx);
3518 if (info->icount.frame)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003519 seq_printf(m, " fe:%d", info->icount.frame);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003520 if (info->icount.parity)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003521 seq_printf(m, " pe:%d", info->icount.parity);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003522 if (info->icount.brk)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003523 seq_printf(m, " brk:%d", info->icount.brk);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003524 if (info->icount.overrun)
Alexey Dobriyand3378292009-03-31 15:19:18 -07003525 seq_printf(m, " oe:%d", info->icount.overrun);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003526 }
3527
3528 /* Append serial signal status to end */
Alexey Dobriyand3378292009-03-31 15:19:18 -07003529 seq_printf(m, " %s\n", stat_buf+1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003530
Alexey Dobriyand3378292009-03-31 15:19:18 -07003531 seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -07003532 info->tx_active,info->bh_requested,info->bh_running,
3533 info->pending_bh);
3534
3535 spin_lock_irqsave(&info->irq_spinlock,flags);
3536 {
3537 u16 Tcsr = usc_InReg( info, TCSR );
3538 u16 Tdmr = usc_InDmaReg( info, TDMR );
3539 u16 Ticr = usc_InReg( info, TICR );
3540 u16 Rscr = usc_InReg( info, RCSR );
3541 u16 Rdmr = usc_InDmaReg( info, RDMR );
3542 u16 Ricr = usc_InReg( info, RICR );
3543 u16 Icr = usc_InReg( info, ICR );
3544 u16 Dccr = usc_InReg( info, DCCR );
3545 u16 Tmr = usc_InReg( info, TMR );
3546 u16 Tccr = usc_InReg( info, TCCR );
3547 u16 Ccar = inw( info->io_base + CCAR );
Alexey Dobriyand3378292009-03-31 15:19:18 -07003548 seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003549 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3550 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3551 }
3552 spin_unlock_irqrestore(&info->irq_spinlock,flags);
Alexey Dobriyand3378292009-03-31 15:19:18 -07003553}
Linus Torvalds1da177e2005-04-16 15:20:36 -07003554
Alexey Dobriyand3378292009-03-31 15:19:18 -07003555/* Called to print information about devices */
3556static int mgsl_proc_show(struct seq_file *m, void *v)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003557{
Linus Torvalds1da177e2005-04-16 15:20:36 -07003558 struct mgsl_struct *info;
3559
Alexey Dobriyand3378292009-03-31 15:19:18 -07003560 seq_printf(m, "synclink driver:%s\n", driver_version);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003561
3562 info = mgsl_device_list;
3563 while( info ) {
Alexey Dobriyand3378292009-03-31 15:19:18 -07003564 line_info(m, info);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003565 info = info->next_device;
3566 }
Alexey Dobriyand3378292009-03-31 15:19:18 -07003567 return 0;
3568}
Linus Torvalds1da177e2005-04-16 15:20:36 -07003569
Alexey Dobriyand3378292009-03-31 15:19:18 -07003570static int mgsl_proc_open(struct inode *inode, struct file *file)
3571{
3572 return single_open(file, mgsl_proc_show, NULL);
3573}
3574
3575static const struct file_operations mgsl_proc_fops = {
3576 .owner = THIS_MODULE,
3577 .open = mgsl_proc_open,
3578 .read = seq_read,
3579 .llseek = seq_lseek,
3580 .release = single_release,
3581};
Linus Torvalds1da177e2005-04-16 15:20:36 -07003582
3583/* mgsl_allocate_dma_buffers()
3584 *
3585 * Allocate and format DMA buffers (ISA adapter)
3586 * or format shared memory buffers (PCI adapter).
3587 *
3588 * Arguments: info pointer to device instance data
3589 * Return Value: 0 if success, otherwise error
3590 */
3591static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3592{
3593 unsigned short BuffersPerFrame;
3594
3595 info->last_mem_alloc = 0;
3596
3597 /* Calculate the number of DMA buffers necessary to hold the */
3598 /* largest allowable frame size. Note: If the max frame size is */
3599 /* not an even multiple of the DMA buffer size then we need to */
3600 /* round the buffer count per frame up one. */
3601
3602 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3603 if ( info->max_frame_size % DMABUFFERSIZE )
3604 BuffersPerFrame++;
3605
3606 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3607 /*
3608 * The PCI adapter has 256KBytes of shared memory to use.
3609 * This is 64 PAGE_SIZE buffers.
3610 *
3611 * The first page is used for padding at this time so the
3612 * buffer list does not begin at offset 0 of the PCI
3613 * adapter's shared memory.
3614 *
3615 * The 2nd page is used for the buffer list. A 4K buffer
3616 * list can hold 128 DMA_BUFFER structures at 32 bytes
3617 * each.
3618 *
3619 * This leaves 62 4K pages.
3620 *
3621 * The next N pages are used for transmit frame(s). We
3622 * reserve enough 4K page blocks to hold the required
3623 * number of transmit dma buffers (num_tx_dma_buffers),
3624 * each of MaxFrameSize size.
3625 *
3626 * Of the remaining pages (62-N), determine how many can
3627 * be used to receive full MaxFrameSize inbound frames
3628 */
3629 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3630 info->rx_buffer_count = 62 - info->tx_buffer_count;
3631 } else {
3632 /* Calculate the number of PAGE_SIZE buffers needed for */
3633 /* receive and transmit DMA buffers. */
3634
3635
3636 /* Calculate the number of DMA buffers necessary to */
3637 /* hold 7 max size receive frames and one max size transmit frame. */
3638 /* The receive buffer count is bumped by one so we avoid an */
3639 /* End of List condition if all receive buffers are used when */
3640 /* using linked list DMA buffers. */
3641
3642 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3643 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3644
3645 /*
3646 * limit total TxBuffers & RxBuffers to 62 4K total
3647 * (ala PCI Allocation)
3648 */
3649
3650 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3651 info->rx_buffer_count = 62 - info->tx_buffer_count;
3652
3653 }
3654
3655 if ( debug_level >= DEBUG_LEVEL_INFO )
3656 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3657 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3658
3659 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3660 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3661 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3662 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3663 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3664 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3665 return -ENOMEM;
3666 }
3667
3668 mgsl_reset_rx_dma_buffers( info );
3669 mgsl_reset_tx_dma_buffers( info );
3670
3671 return 0;
3672
3673} /* end of mgsl_allocate_dma_buffers() */
3674
3675/*
3676 * mgsl_alloc_buffer_list_memory()
3677 *
3678 * Allocate a common DMA buffer for use as the
3679 * receive and transmit buffer lists.
3680 *
3681 * A buffer list is a set of buffer entries where each entry contains
3682 * a pointer to an actual buffer and a pointer to the next buffer entry
3683 * (plus some other info about the buffer).
3684 *
3685 * The buffer entries for a list are built to form a circular list so
3686 * that when the entire list has been traversed you start back at the
3687 * beginning.
3688 *
3689 * This function allocates memory for just the buffer entries.
3690 * The links (pointer to next entry) are filled in with the physical
3691 * address of the next entry so the adapter can navigate the list
3692 * using bus master DMA. The pointers to the actual buffers are filled
3693 * out later when the actual buffers are allocated.
3694 *
3695 * Arguments: info pointer to device instance data
3696 * Return Value: 0 if success, otherwise error
3697 */
3698static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3699{
3700 unsigned int i;
3701
3702 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3703 /* PCI adapter uses shared memory. */
3704 info->buffer_list = info->memory_base + info->last_mem_alloc;
3705 info->buffer_list_phys = info->last_mem_alloc;
3706 info->last_mem_alloc += BUFFERLISTSIZE;
3707 } else {
3708 /* ISA adapter uses system memory. */
3709 /* The buffer lists are allocated as a common buffer that both */
3710 /* the processor and adapter can access. This allows the driver to */
3711 /* inspect portions of the buffer while other portions are being */
3712 /* updated by the adapter using Bus Master DMA. */
3713
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003714 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3715 if (info->buffer_list == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003716 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003717 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003718 }
3719
3720 /* We got the memory for the buffer entry lists. */
3721 /* Initialize the memory block to all zeros. */
3722 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3723
3724 /* Save virtual address pointers to the receive and */
3725 /* transmit buffer lists. (Receive 1st). These pointers will */
3726 /* be used by the processor to access the lists. */
3727 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3728 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3729 info->tx_buffer_list += info->rx_buffer_count;
3730
3731 /*
3732 * Build the links for the buffer entry lists such that
3733 * two circular lists are built. (Transmit and Receive).
3734 *
3735 * Note: the links are physical addresses
3736 * which are read by the adapter to determine the next
3737 * buffer entry to use.
3738 */
3739
3740 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3741 /* calculate and store physical address of this buffer entry */
3742 info->rx_buffer_list[i].phys_entry =
3743 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3744
3745 /* calculate and store physical address of */
3746 /* next entry in cirular list of entries */
3747
3748 info->rx_buffer_list[i].link = info->buffer_list_phys;
3749
3750 if ( i < info->rx_buffer_count - 1 )
3751 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3752 }
3753
3754 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3755 /* calculate and store physical address of this buffer entry */
3756 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3757 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3758
3759 /* calculate and store physical address of */
3760 /* next entry in cirular list of entries */
3761
3762 info->tx_buffer_list[i].link = info->buffer_list_phys +
3763 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3764
3765 if ( i < info->tx_buffer_count - 1 )
3766 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3767 }
3768
3769 return 0;
3770
3771} /* end of mgsl_alloc_buffer_list_memory() */
3772
3773/* Free DMA buffers allocated for use as the
3774 * receive and transmit buffer lists.
3775 * Warning:
3776 *
3777 * The data transfer buffers associated with the buffer list
3778 * MUST be freed before freeing the buffer list itself because
3779 * the buffer list contains the information necessary to free
3780 * the individual buffers!
3781 */
3782static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3783{
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003784 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3785 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003786
3787 info->buffer_list = NULL;
3788 info->rx_buffer_list = NULL;
3789 info->tx_buffer_list = NULL;
3790
3791} /* end of mgsl_free_buffer_list_memory() */
3792
3793/*
3794 * mgsl_alloc_frame_memory()
3795 *
3796 * Allocate the frame DMA buffers used by the specified buffer list.
3797 * Each DMA buffer will be one memory page in size. This is necessary
3798 * because memory can fragment enough that it may be impossible
3799 * contiguous pages.
3800 *
3801 * Arguments:
3802 *
3803 * info pointer to device instance data
3804 * BufferList pointer to list of buffer entries
3805 * Buffercount count of buffer entries in buffer list
3806 *
3807 * Return Value: 0 if success, otherwise -ENOMEM
3808 */
3809static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3810{
3811 int i;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003812 u32 phys_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003813
3814 /* Allocate page sized buffers for the receive buffer list */
3815
3816 for ( i = 0; i < Buffercount; i++ ) {
3817 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3818 /* PCI adapter uses shared memory buffers. */
3819 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3820 phys_addr = info->last_mem_alloc;
3821 info->last_mem_alloc += DMABUFFERSIZE;
3822 } else {
3823 /* ISA adapter uses system memory. */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003824 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3825 if (BufferList[i].virt_addr == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003826 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003827 phys_addr = (u32)(BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003828 }
3829 BufferList[i].phys_addr = phys_addr;
3830 }
3831
3832 return 0;
3833
3834} /* end of mgsl_alloc_frame_memory() */
3835
3836/*
3837 * mgsl_free_frame_memory()
3838 *
3839 * Free the buffers associated with
3840 * each buffer entry of a buffer list.
3841 *
3842 * Arguments:
3843 *
3844 * info pointer to device instance data
3845 * BufferList pointer to list of buffer entries
3846 * Buffercount count of buffer entries in buffer list
3847 *
3848 * Return Value: None
3849 */
3850static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3851{
3852 int i;
3853
3854 if ( BufferList ) {
3855 for ( i = 0 ; i < Buffercount ; i++ ) {
3856 if ( BufferList[i].virt_addr ) {
3857 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003858 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003859 BufferList[i].virt_addr = NULL;
3860 }
3861 }
3862 }
3863
3864} /* end of mgsl_free_frame_memory() */
3865
3866/* mgsl_free_dma_buffers()
3867 *
3868 * Free DMA buffers
3869 *
3870 * Arguments: info pointer to device instance data
3871 * Return Value: None
3872 */
3873static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3874{
3875 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3876 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3877 mgsl_free_buffer_list_memory( info );
3878
3879} /* end of mgsl_free_dma_buffers() */
3880
3881
3882/*
3883 * mgsl_alloc_intermediate_rxbuffer_memory()
3884 *
3885 * Allocate a buffer large enough to hold max_frame_size. This buffer
3886 * is used to pass an assembled frame to the line discipline.
3887 *
3888 * Arguments:
3889 *
3890 * info pointer to device instance data
3891 *
3892 * Return Value: 0 if success, otherwise -ENOMEM
3893 */
3894static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3895{
3896 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3897 if ( info->intermediate_rxbuffer == NULL )
3898 return -ENOMEM;
3899
3900 return 0;
3901
3902} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3903
3904/*
3905 * mgsl_free_intermediate_rxbuffer_memory()
3906 *
3907 *
3908 * Arguments:
3909 *
3910 * info pointer to device instance data
3911 *
3912 * Return Value: None
3913 */
3914static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3915{
Jesper Juhl735d5662005-11-07 01:01:29 -08003916 kfree(info->intermediate_rxbuffer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003917 info->intermediate_rxbuffer = NULL;
3918
3919} /* end of mgsl_free_intermediate_rxbuffer_memory() */
3920
3921/*
3922 * mgsl_alloc_intermediate_txbuffer_memory()
3923 *
3924 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3925 * This buffer is used to load transmit frames into the adapter's dma transfer
3926 * buffers when there is sufficient space.
3927 *
3928 * Arguments:
3929 *
3930 * info pointer to device instance data
3931 *
3932 * Return Value: 0 if success, otherwise -ENOMEM
3933 */
3934static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3935{
3936 int i;
3937
3938 if ( debug_level >= DEBUG_LEVEL_INFO )
3939 printk("%s %s(%d) allocating %d tx holding buffers\n",
3940 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3941
3942 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3943
3944 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3945 info->tx_holding_buffers[i].buffer =
3946 kmalloc(info->max_frame_size, GFP_KERNEL);
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07003947 if (info->tx_holding_buffers[i].buffer == NULL) {
3948 for (--i; i >= 0; i--) {
3949 kfree(info->tx_holding_buffers[i].buffer);
3950 info->tx_holding_buffers[i].buffer = NULL;
3951 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003952 return -ENOMEM;
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07003953 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003954 }
3955
3956 return 0;
3957
3958} /* end of mgsl_alloc_intermediate_txbuffer_memory() */
3959
3960/*
3961 * mgsl_free_intermediate_txbuffer_memory()
3962 *
3963 *
3964 * Arguments:
3965 *
3966 * info pointer to device instance data
3967 *
3968 * Return Value: None
3969 */
3970static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
3971{
3972 int i;
3973
3974 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
Jesper Juhl735d5662005-11-07 01:01:29 -08003975 kfree(info->tx_holding_buffers[i].buffer);
3976 info->tx_holding_buffers[i].buffer = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003977 }
3978
3979 info->get_tx_holding_index = 0;
3980 info->put_tx_holding_index = 0;
3981 info->tx_holding_count = 0;
3982
3983} /* end of mgsl_free_intermediate_txbuffer_memory() */
3984
3985
3986/*
3987 * load_next_tx_holding_buffer()
3988 *
3989 * attempts to load the next buffered tx request into the
3990 * tx dma buffers
3991 *
3992 * Arguments:
3993 *
3994 * info pointer to device instance data
3995 *
Joe Perches0fab6de2008-04-28 02:14:02 -07003996 * Return Value: true if next buffered tx request loaded
Linus Torvalds1da177e2005-04-16 15:20:36 -07003997 * into adapter's tx dma buffer,
Joe Perches0fab6de2008-04-28 02:14:02 -07003998 * false otherwise
Linus Torvalds1da177e2005-04-16 15:20:36 -07003999 */
Joe Perches0fab6de2008-04-28 02:14:02 -07004000static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004001{
Joe Perches0fab6de2008-04-28 02:14:02 -07004002 bool ret = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004003
4004 if ( info->tx_holding_count ) {
4005 /* determine if we have enough tx dma buffers
4006 * to accommodate the next tx frame
4007 */
4008 struct tx_holding_buffer *ptx =
4009 &info->tx_holding_buffers[info->get_tx_holding_index];
4010 int num_free = num_free_tx_dma_buffers(info);
4011 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
4012 if ( ptx->buffer_size % DMABUFFERSIZE )
4013 ++num_needed;
4014
4015 if (num_needed <= num_free) {
4016 info->xmit_cnt = ptx->buffer_size;
4017 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
4018
4019 --info->tx_holding_count;
4020 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
4021 info->get_tx_holding_index=0;
4022
4023 /* restart transmit timer */
4024 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4025
Joe Perches0fab6de2008-04-28 02:14:02 -07004026 ret = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004027 }
4028 }
4029
4030 return ret;
4031}
4032
4033/*
4034 * save_tx_buffer_request()
4035 *
4036 * attempt to store transmit frame request for later transmission
4037 *
4038 * Arguments:
4039 *
4040 * info pointer to device instance data
4041 * Buffer pointer to buffer containing frame to load
4042 * BufferSize size in bytes of frame in Buffer
4043 *
4044 * Return Value: 1 if able to store, 0 otherwise
4045 */
4046static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4047{
4048 struct tx_holding_buffer *ptx;
4049
4050 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4051 return 0; /* all buffers in use */
4052 }
4053
4054 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4055 ptx->buffer_size = BufferSize;
4056 memcpy( ptx->buffer, Buffer, BufferSize);
4057
4058 ++info->tx_holding_count;
4059 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4060 info->put_tx_holding_index=0;
4061
4062 return 1;
4063}
4064
4065static int mgsl_claim_resources(struct mgsl_struct *info)
4066{
4067 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4068 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4069 __FILE__,__LINE__,info->device_name, info->io_base);
4070 return -ENODEV;
4071 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004072 info->io_addr_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004073
4074 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4075 info->device_name, info ) < 0 ) {
4076 printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
4077 __FILE__,__LINE__,info->device_name, info->irq_level );
4078 goto errout;
4079 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004080 info->irq_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004081
4082 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4083 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4084 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4085 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4086 goto errout;
4087 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004088 info->shared_mem_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004089 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4090 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4091 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4092 goto errout;
4093 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004094 info->lcr_mem_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004095
Alan Cox24cb2332008-04-30 00:54:19 -07004096 info->memory_base = ioremap_nocache(info->phys_memory_base,
4097 0x40000);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004098 if (!info->memory_base) {
4099 printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
4100 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4101 goto errout;
4102 }
4103
4104 if ( !mgsl_memory_test(info) ) {
4105 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4106 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4107 goto errout;
4108 }
4109
Alan Cox24cb2332008-04-30 00:54:19 -07004110 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
4111 PAGE_SIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004112 if (!info->lcr_base) {
4113 printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
4114 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4115 goto errout;
4116 }
Alan Cox24cb2332008-04-30 00:54:19 -07004117 info->lcr_base += info->lcr_offset;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004118
4119 } else {
4120 /* claim DMA channel */
4121
4122 if (request_dma(info->dma_level,info->device_name) < 0){
4123 printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
4124 __FILE__,__LINE__,info->device_name, info->dma_level );
4125 mgsl_release_resources( info );
4126 return -ENODEV;
4127 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004128 info->dma_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004129
4130 /* ISA adapter uses bus master DMA */
4131 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4132 enable_dma(info->dma_level);
4133 }
4134
4135 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4136 printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
4137 __FILE__,__LINE__,info->device_name, info->dma_level );
4138 goto errout;
4139 }
4140
4141 return 0;
4142errout:
4143 mgsl_release_resources(info);
4144 return -ENODEV;
4145
4146} /* end of mgsl_claim_resources() */
4147
4148static void mgsl_release_resources(struct mgsl_struct *info)
4149{
4150 if ( debug_level >= DEBUG_LEVEL_INFO )
4151 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4152 __FILE__,__LINE__,info->device_name );
4153
4154 if ( info->irq_requested ) {
4155 free_irq(info->irq_level, info);
Joe Perches0fab6de2008-04-28 02:14:02 -07004156 info->irq_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004157 }
4158 if ( info->dma_requested ) {
4159 disable_dma(info->dma_level);
4160 free_dma(info->dma_level);
Joe Perches0fab6de2008-04-28 02:14:02 -07004161 info->dma_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004162 }
4163 mgsl_free_dma_buffers(info);
4164 mgsl_free_intermediate_rxbuffer_memory(info);
4165 mgsl_free_intermediate_txbuffer_memory(info);
4166
4167 if ( info->io_addr_requested ) {
4168 release_region(info->io_base,info->io_addr_size);
Joe Perches0fab6de2008-04-28 02:14:02 -07004169 info->io_addr_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004170 }
4171 if ( info->shared_mem_requested ) {
4172 release_mem_region(info->phys_memory_base,0x40000);
Joe Perches0fab6de2008-04-28 02:14:02 -07004173 info->shared_mem_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004174 }
4175 if ( info->lcr_mem_requested ) {
4176 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
Joe Perches0fab6de2008-04-28 02:14:02 -07004177 info->lcr_mem_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004178 }
4179 if (info->memory_base){
4180 iounmap(info->memory_base);
4181 info->memory_base = NULL;
4182 }
4183 if (info->lcr_base){
4184 iounmap(info->lcr_base - info->lcr_offset);
4185 info->lcr_base = NULL;
4186 }
4187
4188 if ( debug_level >= DEBUG_LEVEL_INFO )
4189 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4190 __FILE__,__LINE__,info->device_name );
4191
4192} /* end of mgsl_release_resources() */
4193
4194/* mgsl_add_device()
4195 *
4196 * Add the specified device instance data structure to the
4197 * global linked list of devices and increment the device count.
4198 *
4199 * Arguments: info pointer to device instance data
4200 * Return Value: None
4201 */
4202static void mgsl_add_device( struct mgsl_struct *info )
4203{
4204 info->next_device = NULL;
4205 info->line = mgsl_device_count;
4206 sprintf(info->device_name,"ttySL%d",info->line);
4207
4208 if (info->line < MAX_TOTAL_DEVICES) {
4209 if (maxframe[info->line])
4210 info->max_frame_size = maxframe[info->line];
Linus Torvalds1da177e2005-04-16 15:20:36 -07004211
4212 if (txdmabufs[info->line]) {
4213 info->num_tx_dma_buffers = txdmabufs[info->line];
4214 if (info->num_tx_dma_buffers < 1)
4215 info->num_tx_dma_buffers = 1;
4216 }
4217
4218 if (txholdbufs[info->line]) {
4219 info->num_tx_holding_buffers = txholdbufs[info->line];
4220 if (info->num_tx_holding_buffers < 1)
4221 info->num_tx_holding_buffers = 1;
4222 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4223 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4224 }
4225 }
4226
4227 mgsl_device_count++;
4228
4229 if ( !mgsl_device_list )
4230 mgsl_device_list = info;
4231 else {
4232 struct mgsl_struct *current_dev = mgsl_device_list;
4233 while( current_dev->next_device )
4234 current_dev = current_dev->next_device;
4235 current_dev->next_device = info;
4236 }
4237
4238 if ( info->max_frame_size < 4096 )
4239 info->max_frame_size = 4096;
4240 else if ( info->max_frame_size > 65535 )
4241 info->max_frame_size = 65535;
4242
4243 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4244 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4245 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4246 info->phys_memory_base, info->phys_lcr_base,
4247 info->max_frame_size );
4248 } else {
4249 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4250 info->device_name, info->io_base, info->irq_level, info->dma_level,
4251 info->max_frame_size );
4252 }
4253
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004254#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004255 hdlcdev_init(info);
4256#endif
4257
4258} /* end of mgsl_add_device() */
4259
Alan Cox31f35932009-01-02 13:45:05 +00004260static const struct tty_port_operations mgsl_port_ops = {
4261 .carrier_raised = carrier_raised,
Alan Coxfcc8ac12009-06-11 12:24:17 +01004262 .dtr_rts = dtr_rts,
Alan Cox31f35932009-01-02 13:45:05 +00004263};
4264
4265
Linus Torvalds1da177e2005-04-16 15:20:36 -07004266/* mgsl_allocate_device()
4267 *
4268 * Allocate and initialize a device instance structure
4269 *
4270 * Arguments: none
4271 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4272 */
4273static struct mgsl_struct* mgsl_allocate_device(void)
4274{
4275 struct mgsl_struct *info;
4276
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07004277 info = kzalloc(sizeof(struct mgsl_struct),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004278 GFP_KERNEL);
4279
4280 if (!info) {
4281 printk("Error can't allocate device instance data\n");
4282 } else {
Alan Cox44b7d1b2008-07-16 21:57:18 +01004283 tty_port_init(&info->port);
Alan Cox31f35932009-01-02 13:45:05 +00004284 info->port.ops = &mgsl_port_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004285 info->magic = MGSL_MAGIC;
David Howellsc4028952006-11-22 14:57:56 +00004286 INIT_WORK(&info->task, mgsl_bh_handler);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004287 info->max_frame_size = 4096;
Alan Cox44b7d1b2008-07-16 21:57:18 +01004288 info->port.close_delay = 5*HZ/10;
4289 info->port.closing_wait = 30*HZ;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004290 init_waitqueue_head(&info->status_event_wait_q);
4291 init_waitqueue_head(&info->event_wait_q);
4292 spin_lock_init(&info->irq_spinlock);
4293 spin_lock_init(&info->netlock);
4294 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4295 info->idle_mode = HDLC_TXIDLE_FLAGS;
4296 info->num_tx_dma_buffers = 1;
4297 info->num_tx_holding_buffers = 0;
4298 }
4299
4300 return info;
4301
4302} /* end of mgsl_allocate_device()*/
4303
Jeff Dikeb68e31d2006-10-02 02:17:18 -07004304static const struct tty_operations mgsl_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004305 .open = mgsl_open,
4306 .close = mgsl_close,
4307 .write = mgsl_write,
4308 .put_char = mgsl_put_char,
4309 .flush_chars = mgsl_flush_chars,
4310 .write_room = mgsl_write_room,
4311 .chars_in_buffer = mgsl_chars_in_buffer,
4312 .flush_buffer = mgsl_flush_buffer,
4313 .ioctl = mgsl_ioctl,
4314 .throttle = mgsl_throttle,
4315 .unthrottle = mgsl_unthrottle,
4316 .send_xchar = mgsl_send_xchar,
4317 .break_ctl = mgsl_break,
4318 .wait_until_sent = mgsl_wait_until_sent,
Linus Torvalds1da177e2005-04-16 15:20:36 -07004319 .set_termios = mgsl_set_termios,
4320 .stop = mgsl_stop,
4321 .start = mgsl_start,
4322 .hangup = mgsl_hangup,
4323 .tiocmget = tiocmget,
4324 .tiocmset = tiocmset,
Alan Cox05871022010-09-16 18:21:52 +01004325 .get_icount = msgl_get_icount,
Alexey Dobriyand3378292009-03-31 15:19:18 -07004326 .proc_fops = &mgsl_proc_fops,
Linus Torvalds1da177e2005-04-16 15:20:36 -07004327};
4328
4329/*
4330 * perform tty device initialization
4331 */
4332static int mgsl_init_tty(void)
4333{
4334 int rc;
4335
4336 serial_driver = alloc_tty_driver(128);
4337 if (!serial_driver)
4338 return -ENOMEM;
4339
4340 serial_driver->owner = THIS_MODULE;
4341 serial_driver->driver_name = "synclink";
4342 serial_driver->name = "ttySL";
4343 serial_driver->major = ttymajor;
4344 serial_driver->minor_start = 64;
4345 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4346 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4347 serial_driver->init_termios = tty_std_termios;
4348 serial_driver->init_termios.c_cflag =
4349 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
Alan Cox606d0992006-12-08 02:38:45 -08004350 serial_driver->init_termios.c_ispeed = 9600;
4351 serial_driver->init_termios.c_ospeed = 9600;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004352 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4353 tty_set_operations(serial_driver, &mgsl_ops);
4354 if ((rc = tty_register_driver(serial_driver)) < 0) {
4355 printk("%s(%d):Couldn't register serial driver\n",
4356 __FILE__,__LINE__);
4357 put_tty_driver(serial_driver);
4358 serial_driver = NULL;
4359 return rc;
4360 }
4361
4362 printk("%s %s, tty major#%d\n",
4363 driver_name, driver_version,
4364 serial_driver->major);
4365 return 0;
4366}
4367
4368/* enumerate user specified ISA adapters
4369 */
4370static void mgsl_enum_isa_devices(void)
4371{
4372 struct mgsl_struct *info;
4373 int i;
4374
4375 /* Check for user specified ISA devices */
4376
4377 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4378 if ( debug_level >= DEBUG_LEVEL_INFO )
4379 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4380 io[i], irq[i], dma[i] );
4381
4382 info = mgsl_allocate_device();
4383 if ( !info ) {
4384 /* error allocating device instance data */
4385 if ( debug_level >= DEBUG_LEVEL_ERROR )
4386 printk( "can't allocate device instance data.\n");
4387 continue;
4388 }
4389
4390 /* Copy user configuration info to device instance data */
4391 info->io_base = (unsigned int)io[i];
4392 info->irq_level = (unsigned int)irq[i];
4393 info->irq_level = irq_canonicalize(info->irq_level);
4394 info->dma_level = (unsigned int)dma[i];
4395 info->bus_type = MGSL_BUS_TYPE_ISA;
4396 info->io_addr_size = 16;
4397 info->irq_flags = 0;
4398
4399 mgsl_add_device( info );
4400 }
4401}
4402
4403static void synclink_cleanup(void)
4404{
4405 int rc;
4406 struct mgsl_struct *info;
4407 struct mgsl_struct *tmp;
4408
4409 printk("Unloading %s: %s\n", driver_name, driver_version);
4410
4411 if (serial_driver) {
4412 if ((rc = tty_unregister_driver(serial_driver)))
4413 printk("%s(%d) failed to unregister tty driver err=%d\n",
4414 __FILE__,__LINE__,rc);
4415 put_tty_driver(serial_driver);
4416 }
4417
4418 info = mgsl_device_list;
4419 while(info) {
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004420#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004421 hdlcdev_exit(info);
4422#endif
4423 mgsl_release_resources(info);
4424 tmp = info;
4425 info = info->next_device;
4426 kfree(tmp);
4427 }
4428
Linus Torvalds1da177e2005-04-16 15:20:36 -07004429 if (pci_registered)
4430 pci_unregister_driver(&synclink_pci_driver);
4431}
4432
4433static int __init synclink_init(void)
4434{
4435 int rc;
4436
4437 if (break_on_load) {
4438 mgsl_get_text_ptr();
4439 BREAKPOINT();
4440 }
4441
4442 printk("%s %s\n", driver_name, driver_version);
4443
4444 mgsl_enum_isa_devices();
4445 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4446 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4447 else
Joe Perches0fab6de2008-04-28 02:14:02 -07004448 pci_registered = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004449
4450 if ((rc = mgsl_init_tty()) < 0)
4451 goto error;
4452
4453 return 0;
4454
4455error:
4456 synclink_cleanup();
4457 return rc;
4458}
4459
4460static void __exit synclink_exit(void)
4461{
4462 synclink_cleanup();
4463}
4464
4465module_init(synclink_init);
4466module_exit(synclink_exit);
4467
4468/*
4469 * usc_RTCmd()
4470 *
4471 * Issue a USC Receive/Transmit command to the
4472 * Channel Command/Address Register (CCAR).
4473 *
4474 * Notes:
4475 *
4476 * The command is encoded in the most significant 5 bits <15..11>
4477 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4478 * and Bits <6..0> must be written as zeros.
4479 *
4480 * Arguments:
4481 *
4482 * info pointer to device information structure
4483 * Cmd command mask (use symbolic macros)
4484 *
4485 * Return Value:
4486 *
4487 * None
4488 */
4489static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4490{
4491 /* output command to CCAR in bits <15..11> */
4492 /* preserve bits <10..7>, bits <6..0> must be zero */
4493
4494 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4495
4496 /* Read to flush write to CCAR */
4497 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4498 inw( info->io_base + CCAR );
4499
4500} /* end of usc_RTCmd() */
4501
4502/*
4503 * usc_DmaCmd()
4504 *
4505 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4506 *
4507 * Arguments:
4508 *
4509 * info pointer to device information structure
4510 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4511 *
4512 * Return Value:
4513 *
4514 * None
4515 */
4516static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4517{
4518 /* write command mask to DCAR */
4519 outw( Cmd + info->mbre_bit, info->io_base );
4520
4521 /* Read to flush write to DCAR */
4522 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4523 inw( info->io_base );
4524
4525} /* end of usc_DmaCmd() */
4526
4527/*
4528 * usc_OutDmaReg()
4529 *
4530 * Write a 16-bit value to a USC DMA register
4531 *
4532 * Arguments:
4533 *
4534 * info pointer to device info structure
4535 * RegAddr register address (number) for write
4536 * RegValue 16-bit value to write to register
4537 *
4538 * Return Value:
4539 *
4540 * None
4541 *
4542 */
4543static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4544{
4545 /* Note: The DCAR is located at the adapter base address */
4546 /* Note: must preserve state of BIT8 in DCAR */
4547
4548 outw( RegAddr + info->mbre_bit, info->io_base );
4549 outw( RegValue, info->io_base );
4550
4551 /* Read to flush write to DCAR */
4552 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4553 inw( info->io_base );
4554
4555} /* end of usc_OutDmaReg() */
4556
4557/*
4558 * usc_InDmaReg()
4559 *
4560 * Read a 16-bit value from a DMA register
4561 *
4562 * Arguments:
4563 *
4564 * info pointer to device info structure
4565 * RegAddr register address (number) to read from
4566 *
4567 * Return Value:
4568 *
4569 * The 16-bit value read from register
4570 *
4571 */
4572static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4573{
4574 /* Note: The DCAR is located at the adapter base address */
4575 /* Note: must preserve state of BIT8 in DCAR */
4576
4577 outw( RegAddr + info->mbre_bit, info->io_base );
4578 return inw( info->io_base );
4579
4580} /* end of usc_InDmaReg() */
4581
4582/*
4583 *
4584 * usc_OutReg()
4585 *
4586 * Write a 16-bit value to a USC serial channel register
4587 *
4588 * Arguments:
4589 *
4590 * info pointer to device info structure
4591 * RegAddr register address (number) to write to
4592 * RegValue 16-bit value to write to register
4593 *
4594 * Return Value:
4595 *
4596 * None
4597 *
4598 */
4599static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4600{
4601 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4602 outw( RegValue, info->io_base + CCAR );
4603
4604 /* Read to flush write to CCAR */
4605 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4606 inw( info->io_base + CCAR );
4607
4608} /* end of usc_OutReg() */
4609
4610/*
4611 * usc_InReg()
4612 *
4613 * Reads a 16-bit value from a USC serial channel register
4614 *
4615 * Arguments:
4616 *
4617 * info pointer to device extension
4618 * RegAddr register address (number) to read from
4619 *
4620 * Return Value:
4621 *
4622 * 16-bit value read from register
4623 */
4624static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4625{
4626 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4627 return inw( info->io_base + CCAR );
4628
4629} /* end of usc_InReg() */
4630
4631/* usc_set_sdlc_mode()
4632 *
4633 * Set up the adapter for SDLC DMA communications.
4634 *
4635 * Arguments: info pointer to device instance data
4636 * Return Value: NONE
4637 */
4638static void usc_set_sdlc_mode( struct mgsl_struct *info )
4639{
4640 u16 RegValue;
Joe Perches0fab6de2008-04-28 02:14:02 -07004641 bool PreSL1660;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004642
4643 /*
4644 * determine if the IUSC on the adapter is pre-SL1660. If
4645 * not, take advantage of the UnderWait feature of more
4646 * modern chips. If an underrun occurs and this bit is set,
4647 * the transmitter will idle the programmed idle pattern
4648 * until the driver has time to service the underrun. Otherwise,
4649 * the dma controller may get the cycles previously requested
4650 * and begin transmitting queued tx data.
4651 */
4652 usc_OutReg(info,TMCR,0x1f);
4653 RegValue=usc_InReg(info,TMDR);
Joe Perches0fab6de2008-04-28 02:14:02 -07004654 PreSL1660 = (RegValue == IUSC_PRE_SL1660);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004655
4656 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4657 {
4658 /*
4659 ** Channel Mode Register (CMR)
4660 **
4661 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4662 ** <13> 0 0 = Transmit Disabled (initially)
4663 ** <12> 0 1 = Consecutive Idles share common 0
4664 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4665 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4666 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4667 **
4668 ** 1000 1110 0000 0110 = 0x8e06
4669 */
4670 RegValue = 0x8e06;
4671
4672 /*--------------------------------------------------
4673 * ignore user options for UnderRun Actions and
4674 * preambles
4675 *--------------------------------------------------*/
4676 }
4677 else
4678 {
4679 /* Channel mode Register (CMR)
4680 *
4681 * <15..14> 00 Tx Sub modes, Underrun Action
4682 * <13> 0 1 = Send Preamble before opening flag
4683 * <12> 0 1 = Consecutive Idles share common 0
4684 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4685 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4686 * <3..0> 0110 Receiver mode = HDLC/SDLC
4687 *
4688 * 0000 0110 0000 0110 = 0x0606
4689 */
4690 if (info->params.mode == MGSL_MODE_RAW) {
4691 RegValue = 0x0001; /* Set Receive mode = external sync */
4692
4693 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4694 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4695
4696 /*
4697 * TxSubMode:
4698 * CMR <15> 0 Don't send CRC on Tx Underrun
4699 * CMR <14> x undefined
4700 * CMR <13> 0 Send preamble before openning sync
4701 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4702 *
4703 * TxMode:
4704 * CMR <11-8) 0100 MonoSync
4705 *
4706 * 0x00 0100 xxxx xxxx 04xx
4707 */
4708 RegValue |= 0x0400;
4709 }
4710 else {
4711
4712 RegValue = 0x0606;
4713
4714 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4715 RegValue |= BIT14;
4716 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4717 RegValue |= BIT15;
4718 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4719 RegValue |= BIT15 + BIT14;
4720 }
4721
4722 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4723 RegValue |= BIT13;
4724 }
4725
4726 if ( info->params.mode == MGSL_MODE_HDLC &&
4727 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4728 RegValue |= BIT12;
4729
4730 if ( info->params.addr_filter != 0xff )
4731 {
4732 /* set up receive address filtering */
4733 usc_OutReg( info, RSR, info->params.addr_filter );
4734 RegValue |= BIT4;
4735 }
4736
4737 usc_OutReg( info, CMR, RegValue );
4738 info->cmr_value = RegValue;
4739
4740 /* Receiver mode Register (RMR)
4741 *
4742 * <15..13> 000 encoding
4743 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4744 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4745 * <9> 0 1 = Include Receive chars in CRC
4746 * <8> 1 1 = Use Abort/PE bit as abort indicator
4747 * <7..6> 00 Even parity
4748 * <5> 0 parity disabled
4749 * <4..2> 000 Receive Char Length = 8 bits
4750 * <1..0> 00 Disable Receiver
4751 *
4752 * 0000 0101 0000 0000 = 0x0500
4753 */
4754
4755 RegValue = 0x0500;
4756
4757 switch ( info->params.encoding ) {
4758 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4759 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4760 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4761 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4762 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4763 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4764 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4765 }
4766
4767 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4768 RegValue |= BIT9;
4769 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4770 RegValue |= ( BIT12 | BIT10 | BIT9 );
4771
4772 usc_OutReg( info, RMR, RegValue );
4773
4774 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4775 /* When an opening flag of an SDLC frame is recognized the */
4776 /* Receive Character count (RCC) is loaded with the value in */
4777 /* RCLR. The RCC is decremented for each received byte. The */
4778 /* value of RCC is stored after the closing flag of the frame */
4779 /* allowing the frame size to be computed. */
4780
4781 usc_OutReg( info, RCLR, RCLRVALUE );
4782
4783 usc_RCmd( info, RCmd_SelectRicrdma_level );
4784
4785 /* Receive Interrupt Control Register (RICR)
4786 *
4787 * <15..8> ? RxFIFO DMA Request Level
4788 * <7> 0 Exited Hunt IA (Interrupt Arm)
4789 * <6> 0 Idle Received IA
4790 * <5> 0 Break/Abort IA
4791 * <4> 0 Rx Bound IA
4792 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4793 * <2> 0 Abort/PE IA
4794 * <1> 1 Rx Overrun IA
4795 * <0> 0 Select TC0 value for readback
4796 *
4797 * 0000 0000 0000 1000 = 0x000a
4798 */
4799
4800 /* Carry over the Exit Hunt and Idle Received bits */
4801 /* in case they have been armed by usc_ArmEvents. */
4802
4803 RegValue = usc_InReg( info, RICR ) & 0xc0;
4804
4805 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4806 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4807 else
4808 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4809
4810 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4811
4812 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4813 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4814
4815 /* Transmit mode Register (TMR)
4816 *
4817 * <15..13> 000 encoding
4818 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4819 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4820 * <9> 0 1 = Tx CRC Enabled
4821 * <8> 0 1 = Append CRC to end of transmit frame
4822 * <7..6> 00 Transmit parity Even
4823 * <5> 0 Transmit parity Disabled
4824 * <4..2> 000 Tx Char Length = 8 bits
4825 * <1..0> 00 Disable Transmitter
4826 *
4827 * 0000 0100 0000 0000 = 0x0400
4828 */
4829
4830 RegValue = 0x0400;
4831
4832 switch ( info->params.encoding ) {
4833 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4834 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4835 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4836 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4837 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4838 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4839 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4840 }
4841
4842 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4843 RegValue |= BIT9 + BIT8;
4844 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4845 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4846
4847 usc_OutReg( info, TMR, RegValue );
4848
4849 usc_set_txidle( info );
4850
4851
4852 usc_TCmd( info, TCmd_SelectTicrdma_level );
4853
4854 /* Transmit Interrupt Control Register (TICR)
4855 *
4856 * <15..8> ? Transmit FIFO DMA Level
4857 * <7> 0 Present IA (Interrupt Arm)
4858 * <6> 0 Idle Sent IA
4859 * <5> 1 Abort Sent IA
4860 * <4> 1 EOF/EOM Sent IA
4861 * <3> 0 CRC Sent IA
4862 * <2> 1 1 = Wait for SW Trigger to Start Frame
4863 * <1> 1 Tx Underrun IA
4864 * <0> 0 TC0 constant on read back
4865 *
4866 * 0000 0000 0011 0110 = 0x0036
4867 */
4868
4869 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4870 usc_OutReg( info, TICR, 0x0736 );
4871 else
4872 usc_OutReg( info, TICR, 0x1436 );
4873
4874 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4875 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4876
4877 /*
4878 ** Transmit Command/Status Register (TCSR)
4879 **
4880 ** <15..12> 0000 TCmd
4881 ** <11> 0/1 UnderWait
4882 ** <10..08> 000 TxIdle
4883 ** <7> x PreSent
4884 ** <6> x IdleSent
4885 ** <5> x AbortSent
4886 ** <4> x EOF/EOM Sent
4887 ** <3> x CRC Sent
4888 ** <2> x All Sent
4889 ** <1> x TxUnder
4890 ** <0> x TxEmpty
4891 **
4892 ** 0000 0000 0000 0000 = 0x0000
4893 */
4894 info->tcsr_value = 0;
4895
4896 if ( !PreSL1660 )
4897 info->tcsr_value |= TCSR_UNDERWAIT;
4898
4899 usc_OutReg( info, TCSR, info->tcsr_value );
4900
4901 /* Clock mode Control Register (CMCR)
4902 *
4903 * <15..14> 00 counter 1 Source = Disabled
4904 * <13..12> 00 counter 0 Source = Disabled
4905 * <11..10> 11 BRG1 Input is TxC Pin
4906 * <9..8> 11 BRG0 Input is TxC Pin
4907 * <7..6> 01 DPLL Input is BRG1 Output
4908 * <5..3> XXX TxCLK comes from Port 0
4909 * <2..0> XXX RxCLK comes from Port 1
4910 *
4911 * 0000 1111 0111 0111 = 0x0f77
4912 */
4913
4914 RegValue = 0x0f40;
4915
4916 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4917 RegValue |= 0x0003; /* RxCLK from DPLL */
4918 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4919 RegValue |= 0x0004; /* RxCLK from BRG0 */
4920 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4921 RegValue |= 0x0006; /* RxCLK from TXC Input */
4922 else
4923 RegValue |= 0x0007; /* RxCLK from Port1 */
4924
4925 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4926 RegValue |= 0x0018; /* TxCLK from DPLL */
4927 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4928 RegValue |= 0x0020; /* TxCLK from BRG0 */
4929 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4930 RegValue |= 0x0038; /* RxCLK from TXC Input */
4931 else
4932 RegValue |= 0x0030; /* TxCLK from Port0 */
4933
4934 usc_OutReg( info, CMCR, RegValue );
4935
4936
4937 /* Hardware Configuration Register (HCR)
4938 *
4939 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4940 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4941 * <12> 0 CVOK:0=report code violation in biphase
4942 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4943 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4944 * <7..6> 00 reserved
4945 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4946 * <4> X BRG1 Enable
4947 * <3..2> 00 reserved
4948 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4949 * <0> 0 BRG0 Enable
4950 */
4951
4952 RegValue = 0x0000;
4953
4954 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
4955 u32 XtalSpeed;
4956 u32 DpllDivisor;
4957 u16 Tc;
4958
4959 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
4960 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
4961
4962 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4963 XtalSpeed = 11059200;
4964 else
4965 XtalSpeed = 14745600;
4966
4967 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4968 DpllDivisor = 16;
4969 RegValue |= BIT10;
4970 }
4971 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4972 DpllDivisor = 8;
4973 RegValue |= BIT11;
4974 }
4975 else
4976 DpllDivisor = 32;
4977
4978 /* Tc = (Xtal/Speed) - 1 */
4979 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
4980 /* then rounding up gives a more precise time constant. Instead */
4981 /* of rounding up and then subtracting 1 we just don't subtract */
4982 /* the one in this case. */
4983
4984 /*--------------------------------------------------
4985 * ejz: for DPLL mode, application should use the
4986 * same clock speed as the partner system, even
4987 * though clocking is derived from the input RxData.
4988 * In case the user uses a 0 for the clock speed,
4989 * default to 0xffffffff and don't try to divide by
4990 * zero
4991 *--------------------------------------------------*/
4992 if ( info->params.clock_speed )
4993 {
4994 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
4995 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
4996 / info->params.clock_speed) )
4997 Tc--;
4998 }
4999 else
5000 Tc = -1;
5001
5002
5003 /* Write 16-bit Time Constant for BRG1 */
5004 usc_OutReg( info, TC1R, Tc );
5005
5006 RegValue |= BIT4; /* enable BRG1 */
5007
5008 switch ( info->params.encoding ) {
5009 case HDLC_ENCODING_NRZ:
5010 case HDLC_ENCODING_NRZB:
5011 case HDLC_ENCODING_NRZI_MARK:
5012 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
5013 case HDLC_ENCODING_BIPHASE_MARK:
5014 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
5015 case HDLC_ENCODING_BIPHASE_LEVEL:
5016 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
5017 }
5018 }
5019
5020 usc_OutReg( info, HCR, RegValue );
5021
5022
5023 /* Channel Control/status Register (CCSR)
5024 *
5025 * <15> X RCC FIFO Overflow status (RO)
5026 * <14> X RCC FIFO Not Empty status (RO)
5027 * <13> 0 1 = Clear RCC FIFO (WO)
5028 * <12> X DPLL Sync (RW)
5029 * <11> X DPLL 2 Missed Clocks status (RO)
5030 * <10> X DPLL 1 Missed Clock status (RO)
5031 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5032 * <7> X SDLC Loop On status (RO)
5033 * <6> X SDLC Loop Send status (RO)
5034 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5035 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5036 * <1..0> 00 reserved
5037 *
5038 * 0000 0000 0010 0000 = 0x0020
5039 */
5040
5041 usc_OutReg( info, CCSR, 0x1020 );
5042
5043
5044 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5045 usc_OutReg( info, SICR,
5046 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5047 }
5048
5049
5050 /* enable Master Interrupt Enable bit (MIE) */
5051 usc_EnableMasterIrqBit( info );
5052
5053 usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
5054 TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
5055
5056 /* arm RCC underflow interrupt */
5057 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5058 usc_EnableInterrupts(info, MISC);
5059
5060 info->mbre_bit = 0;
5061 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5062 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5063 info->mbre_bit = BIT8;
5064 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5065
5066 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5067 /* Enable DMAEN (Port 7, Bit 14) */
5068 /* This connects the DMA request signal to the ISA bus */
5069 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5070 }
5071
5072 /* DMA Control Register (DCR)
5073 *
5074 * <15..14> 10 Priority mode = Alternating Tx/Rx
5075 * 01 Rx has priority
5076 * 00 Tx has priority
5077 *
5078 * <13> 1 Enable Priority Preempt per DCR<15..14>
5079 * (WARNING DCR<11..10> must be 00 when this is 1)
5080 * 0 Choose activate channel per DCR<11..10>
5081 *
5082 * <12> 0 Little Endian for Array/List
5083 * <11..10> 00 Both Channels can use each bus grant
5084 * <9..6> 0000 reserved
5085 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5086 * <4> 0 1 = drive D/C and S/D pins
5087 * <3> 1 1 = Add one wait state to all DMA cycles.
5088 * <2> 0 1 = Strobe /UAS on every transfer.
5089 * <1..0> 11 Addr incrementing only affects LS24 bits
5090 *
5091 * 0110 0000 0000 1011 = 0x600b
5092 */
5093
5094 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5095 /* PCI adapter does not need DMA wait state */
5096 usc_OutDmaReg( info, DCR, 0xa00b );
5097 }
5098 else
5099 usc_OutDmaReg( info, DCR, 0x800b );
5100
5101
5102 /* Receive DMA mode Register (RDMR)
5103 *
5104 * <15..14> 11 DMA mode = Linked List Buffer mode
5105 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5106 * <12> 1 Clear count of List Entry after fetching
5107 * <11..10> 00 Address mode = Increment
5108 * <9> 1 Terminate Buffer on RxBound
5109 * <8> 0 Bus Width = 16bits
5110 * <7..0> ? status Bits (write as 0s)
5111 *
5112 * 1111 0010 0000 0000 = 0xf200
5113 */
5114
5115 usc_OutDmaReg( info, RDMR, 0xf200 );
5116
5117
5118 /* Transmit DMA mode Register (TDMR)
5119 *
5120 * <15..14> 11 DMA mode = Linked List Buffer mode
5121 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5122 * <12> 1 Clear count of List Entry after fetching
5123 * <11..10> 00 Address mode = Increment
5124 * <9> 1 Terminate Buffer on end of frame
5125 * <8> 0 Bus Width = 16bits
5126 * <7..0> ? status Bits (Read Only so write as 0)
5127 *
5128 * 1111 0010 0000 0000 = 0xf200
5129 */
5130
5131 usc_OutDmaReg( info, TDMR, 0xf200 );
5132
5133
5134 /* DMA Interrupt Control Register (DICR)
5135 *
5136 * <15> 1 DMA Interrupt Enable
5137 * <14> 0 1 = Disable IEO from USC
5138 * <13> 0 1 = Don't provide vector during IntAck
5139 * <12> 1 1 = Include status in Vector
5140 * <10..2> 0 reserved, Must be 0s
5141 * <1> 0 1 = Rx DMA Interrupt Enabled
5142 * <0> 0 1 = Tx DMA Interrupt Enabled
5143 *
5144 * 1001 0000 0000 0000 = 0x9000
5145 */
5146
5147 usc_OutDmaReg( info, DICR, 0x9000 );
5148
5149 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5150 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5151 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5152
5153 /* Channel Control Register (CCR)
5154 *
5155 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5156 * <13> 0 Trigger Tx on SW Command Disabled
5157 * <12> 0 Flag Preamble Disabled
5158 * <11..10> 00 Preamble Length
5159 * <9..8> 00 Preamble Pattern
5160 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5161 * <5> 0 Trigger Rx on SW Command Disabled
5162 * <4..0> 0 reserved
5163 *
5164 * 1000 0000 1000 0000 = 0x8080
5165 */
5166
5167 RegValue = 0x8080;
5168
5169 switch ( info->params.preamble_length ) {
5170 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5171 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5172 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
5173 }
5174
5175 switch ( info->params.preamble ) {
5176 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
5177 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5178 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5179 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break;
5180 }
5181
5182 usc_OutReg( info, CCR, RegValue );
5183
5184
5185 /*
5186 * Burst/Dwell Control Register
5187 *
5188 * <15..8> 0x20 Maximum number of transfers per bus grant
5189 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5190 */
5191
5192 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5193 /* don't limit bus occupancy on PCI adapter */
5194 usc_OutDmaReg( info, BDCR, 0x0000 );
5195 }
5196 else
5197 usc_OutDmaReg( info, BDCR, 0x2000 );
5198
5199 usc_stop_transmitter(info);
5200 usc_stop_receiver(info);
5201
5202} /* end of usc_set_sdlc_mode() */
5203
5204/* usc_enable_loopback()
5205 *
5206 * Set the 16C32 for internal loopback mode.
5207 * The TxCLK and RxCLK signals are generated from the BRG0 and
5208 * the TxD is looped back to the RxD internally.
5209 *
5210 * Arguments: info pointer to device instance data
5211 * enable 1 = enable loopback, 0 = disable
5212 * Return Value: None
5213 */
5214static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5215{
5216 if (enable) {
5217 /* blank external TXD output */
5218 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
5219
5220 /* Clock mode Control Register (CMCR)
5221 *
5222 * <15..14> 00 counter 1 Disabled
5223 * <13..12> 00 counter 0 Disabled
5224 * <11..10> 11 BRG1 Input is TxC Pin
5225 * <9..8> 11 BRG0 Input is TxC Pin
5226 * <7..6> 01 DPLL Input is BRG1 Output
5227 * <5..3> 100 TxCLK comes from BRG0
5228 * <2..0> 100 RxCLK comes from BRG0
5229 *
5230 * 0000 1111 0110 0100 = 0x0f64
5231 */
5232
5233 usc_OutReg( info, CMCR, 0x0f64 );
5234
5235 /* Write 16-bit Time Constant for BRG0 */
5236 /* use clock speed if available, otherwise use 8 for diagnostics */
5237 if (info->params.clock_speed) {
5238 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5239 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5240 else
5241 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5242 } else
5243 usc_OutReg(info, TC0R, (u16)8);
5244
5245 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5246 mode = Continuous Set Bit 0 to enable BRG0. */
5247 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5248
5249 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5250 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5251
5252 /* set Internal Data loopback mode */
5253 info->loopback_bits = 0x300;
5254 outw( 0x0300, info->io_base + CCAR );
5255 } else {
5256 /* enable external TXD output */
5257 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
5258
5259 /* clear Internal Data loopback mode */
5260 info->loopback_bits = 0;
5261 outw( 0,info->io_base + CCAR );
5262 }
5263
5264} /* end of usc_enable_loopback() */
5265
5266/* usc_enable_aux_clock()
5267 *
5268 * Enabled the AUX clock output at the specified frequency.
5269 *
5270 * Arguments:
5271 *
5272 * info pointer to device extension
5273 * data_rate data rate of clock in bits per second
5274 * A data rate of 0 disables the AUX clock.
5275 *
5276 * Return Value: None
5277 */
5278static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5279{
5280 u32 XtalSpeed;
5281 u16 Tc;
5282
5283 if ( data_rate ) {
5284 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5285 XtalSpeed = 11059200;
5286 else
5287 XtalSpeed = 14745600;
5288
5289
5290 /* Tc = (Xtal/Speed) - 1 */
5291 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5292 /* then rounding up gives a more precise time constant. Instead */
5293 /* of rounding up and then subtracting 1 we just don't subtract */
5294 /* the one in this case. */
5295
5296
5297 Tc = (u16)(XtalSpeed/data_rate);
5298 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5299 Tc--;
5300
5301 /* Write 16-bit Time Constant for BRG0 */
5302 usc_OutReg( info, TC0R, Tc );
5303
5304 /*
5305 * Hardware Configuration Register (HCR)
5306 * Clear Bit 1, BRG0 mode = Continuous
5307 * Set Bit 0 to enable BRG0.
5308 */
5309
5310 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5311
5312 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5313 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5314 } else {
5315 /* data rate == 0 so turn off BRG0 */
5316 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5317 }
5318
5319} /* end of usc_enable_aux_clock() */
5320
5321/*
5322 *
5323 * usc_process_rxoverrun_sync()
5324 *
5325 * This function processes a receive overrun by resetting the
5326 * receive DMA buffers and issuing a Purge Rx FIFO command
5327 * to allow the receiver to continue receiving.
5328 *
5329 * Arguments:
5330 *
5331 * info pointer to device extension
5332 *
5333 * Return Value: None
5334 */
5335static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5336{
5337 int start_index;
5338 int end_index;
5339 int frame_start_index;
Joe Perches0fab6de2008-04-28 02:14:02 -07005340 bool start_of_frame_found = false;
5341 bool end_of_frame_found = false;
5342 bool reprogram_dma = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005343
5344 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5345 u32 phys_addr;
5346
5347 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5348 usc_RCmd( info, RCmd_EnterHuntmode );
5349 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5350
5351 /* CurrentRxBuffer points to the 1st buffer of the next */
5352 /* possibly available receive frame. */
5353
5354 frame_start_index = start_index = end_index = info->current_rx_buffer;
5355
5356 /* Search for an unfinished string of buffers. This means */
5357 /* that a receive frame started (at least one buffer with */
5358 /* count set to zero) but there is no terminiting buffer */
5359 /* (status set to non-zero). */
5360
5361 while( !buffer_list[end_index].count )
5362 {
5363 /* Count field has been reset to zero by 16C32. */
5364 /* This buffer is currently in use. */
5365
5366 if ( !start_of_frame_found )
5367 {
Joe Perches0fab6de2008-04-28 02:14:02 -07005368 start_of_frame_found = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005369 frame_start_index = end_index;
Joe Perches0fab6de2008-04-28 02:14:02 -07005370 end_of_frame_found = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005371 }
5372
5373 if ( buffer_list[end_index].status )
5374 {
5375 /* Status field has been set by 16C32. */
5376 /* This is the last buffer of a received frame. */
5377
5378 /* We want to leave the buffers for this frame intact. */
5379 /* Move on to next possible frame. */
5380
Joe Perches0fab6de2008-04-28 02:14:02 -07005381 start_of_frame_found = false;
5382 end_of_frame_found = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005383 }
5384
5385 /* advance to next buffer entry in linked list */
5386 end_index++;
5387 if ( end_index == info->rx_buffer_count )
5388 end_index = 0;
5389
5390 if ( start_index == end_index )
5391 {
5392 /* The entire list has been searched with all Counts == 0 and */
5393 /* all Status == 0. The receive buffers are */
5394 /* completely screwed, reset all receive buffers! */
5395 mgsl_reset_rx_dma_buffers( info );
5396 frame_start_index = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07005397 start_of_frame_found = false;
5398 reprogram_dma = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005399 break;
5400 }
5401 }
5402
5403 if ( start_of_frame_found && !end_of_frame_found )
5404 {
5405 /* There is an unfinished string of receive DMA buffers */
5406 /* as a result of the receiver overrun. */
5407
5408 /* Reset the buffers for the unfinished frame */
5409 /* and reprogram the receive DMA controller to start */
5410 /* at the 1st buffer of unfinished frame. */
5411
5412 start_index = frame_start_index;
5413
5414 do
5415 {
5416 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5417
5418 /* Adjust index for wrap around. */
5419 if ( start_index == info->rx_buffer_count )
5420 start_index = 0;
5421
5422 } while( start_index != end_index );
5423
Joe Perches0fab6de2008-04-28 02:14:02 -07005424 reprogram_dma = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005425 }
5426
5427 if ( reprogram_dma )
5428 {
5429 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5430 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5431 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5432
5433 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5434
5435 /* This empties the receive FIFO and loads the RCC with RCLR */
5436 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5437
5438 /* program 16C32 with physical address of 1st DMA buffer entry */
5439 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5440 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5441 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5442
5443 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5444 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5445 usc_EnableInterrupts( info, RECEIVE_STATUS );
5446
5447 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5448 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5449
5450 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5451 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5452 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5453 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5454 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5455 else
5456 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5457 }
5458 else
5459 {
5460 /* This empties the receive FIFO and loads the RCC with RCLR */
5461 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5462 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5463 }
5464
5465} /* end of usc_process_rxoverrun_sync() */
5466
5467/* usc_stop_receiver()
5468 *
5469 * Disable USC receiver
5470 *
5471 * Arguments: info pointer to device instance data
5472 * Return Value: None
5473 */
5474static void usc_stop_receiver( struct mgsl_struct *info )
5475{
5476 if (debug_level >= DEBUG_LEVEL_ISR)
5477 printk("%s(%d):usc_stop_receiver(%s)\n",
5478 __FILE__,__LINE__, info->device_name );
5479
5480 /* Disable receive DMA channel. */
5481 /* This also disables receive DMA channel interrupts */
5482 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5483
5484 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5485 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5486 usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
5487
5488 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5489
5490 /* This empties the receive FIFO and loads the RCC with RCLR */
5491 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5492 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5493
Joe Perches0fab6de2008-04-28 02:14:02 -07005494 info->rx_enabled = false;
5495 info->rx_overflow = false;
5496 info->rx_rcc_underrun = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005497
5498} /* end of stop_receiver() */
5499
5500/* usc_start_receiver()
5501 *
5502 * Enable the USC receiver
5503 *
5504 * Arguments: info pointer to device instance data
5505 * Return Value: None
5506 */
5507static void usc_start_receiver( struct mgsl_struct *info )
5508{
5509 u32 phys_addr;
5510
5511 if (debug_level >= DEBUG_LEVEL_ISR)
5512 printk("%s(%d):usc_start_receiver(%s)\n",
5513 __FILE__,__LINE__, info->device_name );
5514
5515 mgsl_reset_rx_dma_buffers( info );
5516 usc_stop_receiver( info );
5517
5518 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5519 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5520
5521 if ( info->params.mode == MGSL_MODE_HDLC ||
5522 info->params.mode == MGSL_MODE_RAW ) {
5523 /* DMA mode Transfers */
5524 /* Program the DMA controller. */
5525 /* Enable the DMA controller end of buffer interrupt. */
5526
5527 /* program 16C32 with physical address of 1st DMA buffer entry */
5528 phys_addr = info->rx_buffer_list[0].phys_entry;
5529 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5530 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5531
5532 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5533 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5534 usc_EnableInterrupts( info, RECEIVE_STATUS );
5535
5536 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5537 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5538
5539 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5540 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5541 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5542 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5543 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5544 else
5545 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5546 } else {
5547 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5548 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
5549 usc_EnableInterrupts(info, RECEIVE_DATA);
5550
5551 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5552 usc_RCmd( info, RCmd_EnterHuntmode );
5553
5554 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5555 }
5556
5557 usc_OutReg( info, CCSR, 0x1020 );
5558
Joe Perches0fab6de2008-04-28 02:14:02 -07005559 info->rx_enabled = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005560
5561} /* end of usc_start_receiver() */
5562
5563/* usc_start_transmitter()
5564 *
5565 * Enable the USC transmitter and send a transmit frame if
5566 * one is loaded in the DMA buffers.
5567 *
5568 * Arguments: info pointer to device instance data
5569 * Return Value: None
5570 */
5571static void usc_start_transmitter( struct mgsl_struct *info )
5572{
5573 u32 phys_addr;
5574 unsigned int FrameSize;
5575
5576 if (debug_level >= DEBUG_LEVEL_ISR)
5577 printk("%s(%d):usc_start_transmitter(%s)\n",
5578 __FILE__,__LINE__, info->device_name );
5579
5580 if ( info->xmit_cnt ) {
5581
5582 /* If auto RTS enabled and RTS is inactive, then assert */
5583 /* RTS and set a flag indicating that the driver should */
5584 /* negate RTS when the transmission completes. */
5585
Joe Perches0fab6de2008-04-28 02:14:02 -07005586 info->drop_rts_on_tx_done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005587
5588 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5589 usc_get_serial_signals( info );
5590 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5591 info->serial_signals |= SerialSignal_RTS;
5592 usc_set_serial_signals( info );
Joe Perches0fab6de2008-04-28 02:14:02 -07005593 info->drop_rts_on_tx_done = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005594 }
5595 }
5596
5597
5598 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5599 if ( !info->tx_active ) {
5600 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5601 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5602 usc_EnableInterrupts(info, TRANSMIT_DATA);
5603 usc_load_txfifo(info);
5604 }
5605 } else {
5606 /* Disable transmit DMA controller while programming. */
5607 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5608
5609 /* Transmit DMA buffer is loaded, so program USC */
5610 /* to send the frame contained in the buffers. */
5611
5612 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5613
5614 /* if operating in Raw sync mode, reset the rcc component
5615 * of the tx dma buffer entry, otherwise, the serial controller
5616 * will send a closing sync char after this count.
5617 */
5618 if ( info->params.mode == MGSL_MODE_RAW )
5619 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5620
5621 /* Program the Transmit Character Length Register (TCLR) */
5622 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5623 usc_OutReg( info, TCLR, (u16)FrameSize );
5624
5625 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5626
5627 /* Program the address of the 1st DMA Buffer Entry in linked list */
5628 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5629 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5630 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5631
5632 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5633 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5634 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5635
5636 if ( info->params.mode == MGSL_MODE_RAW &&
5637 info->num_tx_dma_buffers > 1 ) {
5638 /* When running external sync mode, attempt to 'stream' transmit */
5639 /* by filling tx dma buffers as they become available. To do this */
5640 /* we need to enable Tx DMA EOB Status interrupts : */
5641 /* */
5642 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5643 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5644
5645 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5646 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5647 }
5648
5649 /* Initialize Transmit DMA Channel */
5650 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5651
5652 usc_TCmd( info, TCmd_SendFrame );
5653
Jiri Slaby40565f12007-02-12 00:52:31 -08005654 mod_timer(&info->tx_timer, jiffies +
5655 msecs_to_jiffies(5000));
Linus Torvalds1da177e2005-04-16 15:20:36 -07005656 }
Joe Perches0fab6de2008-04-28 02:14:02 -07005657 info->tx_active = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005658 }
5659
5660 if ( !info->tx_enabled ) {
Joe Perches0fab6de2008-04-28 02:14:02 -07005661 info->tx_enabled = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005662 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5663 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5664 else
5665 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5666 }
5667
5668} /* end of usc_start_transmitter() */
5669
5670/* usc_stop_transmitter()
5671 *
5672 * Stops the transmitter and DMA
5673 *
5674 * Arguments: info pointer to device isntance data
5675 * Return Value: None
5676 */
5677static void usc_stop_transmitter( struct mgsl_struct *info )
5678{
5679 if (debug_level >= DEBUG_LEVEL_ISR)
5680 printk("%s(%d):usc_stop_transmitter(%s)\n",
5681 __FILE__,__LINE__, info->device_name );
5682
5683 del_timer(&info->tx_timer);
5684
5685 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5686 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5687 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5688
5689 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5690 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5691 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5692
Joe Perches0fab6de2008-04-28 02:14:02 -07005693 info->tx_enabled = false;
5694 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005695
5696} /* end of usc_stop_transmitter() */
5697
5698/* usc_load_txfifo()
5699 *
5700 * Fill the transmit FIFO until the FIFO is full or
5701 * there is no more data to load.
5702 *
5703 * Arguments: info pointer to device extension (instance data)
5704 * Return Value: None
5705 */
5706static void usc_load_txfifo( struct mgsl_struct *info )
5707{
5708 int Fifocount;
5709 u8 TwoBytes[2];
5710
5711 if ( !info->xmit_cnt && !info->x_char )
5712 return;
5713
5714 /* Select transmit FIFO status readback in TICR */
5715 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5716
5717 /* load the Transmit FIFO until FIFOs full or all data sent */
5718
5719 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5720 /* there is more space in the transmit FIFO and */
5721 /* there is more data in transmit buffer */
5722
5723 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5724 /* write a 16-bit word from transmit buffer to 16C32 */
5725
5726 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5727 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5728 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5729 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5730
5731 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5732
5733 info->xmit_cnt -= 2;
5734 info->icount.tx += 2;
5735 } else {
5736 /* only 1 byte left to transmit or 1 FIFO slot left */
5737
5738 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5739 info->io_base + CCAR );
5740
5741 if (info->x_char) {
5742 /* transmit pending high priority char */
5743 outw( info->x_char,info->io_base + CCAR );
5744 info->x_char = 0;
5745 } else {
5746 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5747 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5748 info->xmit_cnt--;
5749 }
5750 info->icount.tx++;
5751 }
5752 }
5753
5754} /* end of usc_load_txfifo() */
5755
5756/* usc_reset()
5757 *
5758 * Reset the adapter to a known state and prepare it for further use.
5759 *
5760 * Arguments: info pointer to device instance data
5761 * Return Value: None
5762 */
5763static void usc_reset( struct mgsl_struct *info )
5764{
5765 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5766 int i;
5767 u32 readval;
5768
5769 /* Set BIT30 of Misc Control Register */
5770 /* (Local Control Register 0x50) to force reset of USC. */
5771
5772 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5773 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5774
5775 info->misc_ctrl_value |= BIT30;
5776 *MiscCtrl = info->misc_ctrl_value;
5777
5778 /*
5779 * Force at least 170ns delay before clearing
5780 * reset bit. Each read from LCR takes at least
5781 * 30ns so 10 times for 300ns to be safe.
5782 */
5783 for(i=0;i<10;i++)
5784 readval = *MiscCtrl;
5785
5786 info->misc_ctrl_value &= ~BIT30;
5787 *MiscCtrl = info->misc_ctrl_value;
5788
5789 *LCR0BRDR = BUS_DESCRIPTOR(
5790 1, // Write Strobe Hold (0-3)
5791 2, // Write Strobe Delay (0-3)
5792 2, // Read Strobe Delay (0-3)
5793 0, // NWDD (Write data-data) (0-3)
5794 4, // NWAD (Write Addr-data) (0-31)
5795 0, // NXDA (Read/Write Data-Addr) (0-3)
5796 0, // NRDD (Read Data-Data) (0-3)
5797 5 // NRAD (Read Addr-Data) (0-31)
5798 );
5799 } else {
5800 /* do HW reset */
5801 outb( 0,info->io_base + 8 );
5802 }
5803
5804 info->mbre_bit = 0;
5805 info->loopback_bits = 0;
5806 info->usc_idle_mode = 0;
5807
5808 /*
5809 * Program the Bus Configuration Register (BCR)
5810 *
5811 * <15> 0 Don't use separate address
5812 * <14..6> 0 reserved
5813 * <5..4> 00 IAckmode = Default, don't care
5814 * <3> 1 Bus Request Totem Pole output
5815 * <2> 1 Use 16 Bit data bus
5816 * <1> 0 IRQ Totem Pole output
5817 * <0> 0 Don't Shift Right Addr
5818 *
5819 * 0000 0000 0000 1100 = 0x000c
5820 *
5821 * By writing to io_base + SDPIN the Wait/Ack pin is
5822 * programmed to work as a Wait pin.
5823 */
5824
5825 outw( 0x000c,info->io_base + SDPIN );
5826
5827
5828 outw( 0,info->io_base );
5829 outw( 0,info->io_base + CCAR );
5830
5831 /* select little endian byte ordering */
5832 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5833
5834
5835 /* Port Control Register (PCR)
5836 *
5837 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5838 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5839 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5840 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5841 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5842 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5843 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5844 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5845 *
5846 * 1111 0000 1111 0101 = 0xf0f5
5847 */
5848
5849 usc_OutReg( info, PCR, 0xf0f5 );
5850
5851
5852 /*
5853 * Input/Output Control Register
5854 *
5855 * <15..14> 00 CTS is active low input
5856 * <13..12> 00 DCD is active low input
5857 * <11..10> 00 TxREQ pin is input (DSR)
5858 * <9..8> 00 RxREQ pin is input (RI)
5859 * <7..6> 00 TxD is output (Transmit Data)
5860 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5861 * <2..0> 100 RxC is Output (drive with BRG0)
5862 *
5863 * 0000 0000 0000 0100 = 0x0004
5864 */
5865
5866 usc_OutReg( info, IOCR, 0x0004 );
5867
5868} /* end of usc_reset() */
5869
5870/* usc_set_async_mode()
5871 *
5872 * Program adapter for asynchronous communications.
5873 *
5874 * Arguments: info pointer to device instance data
5875 * Return Value: None
5876 */
5877static void usc_set_async_mode( struct mgsl_struct *info )
5878{
5879 u16 RegValue;
5880
5881 /* disable interrupts while programming USC */
5882 usc_DisableMasterIrqBit( info );
5883
5884 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5885 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5886
5887 usc_loopback_frame( info );
5888
5889 /* Channel mode Register (CMR)
5890 *
5891 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5892 * <13..12> 00 00 = 16X Clock
5893 * <11..8> 0000 Transmitter mode = Asynchronous
5894 * <7..6> 00 reserved?
5895 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5896 * <3..0> 0000 Receiver mode = Asynchronous
5897 *
5898 * 0000 0000 0000 0000 = 0x0
5899 */
5900
5901 RegValue = 0;
5902 if ( info->params.stop_bits != 1 )
5903 RegValue |= BIT14;
5904 usc_OutReg( info, CMR, RegValue );
5905
5906
5907 /* Receiver mode Register (RMR)
5908 *
5909 * <15..13> 000 encoding = None
5910 * <12..08> 00000 reserved (Sync Only)
5911 * <7..6> 00 Even parity
5912 * <5> 0 parity disabled
5913 * <4..2> 000 Receive Char Length = 8 bits
5914 * <1..0> 00 Disable Receiver
5915 *
5916 * 0000 0000 0000 0000 = 0x0
5917 */
5918
5919 RegValue = 0;
5920
5921 if ( info->params.data_bits != 8 )
5922 RegValue |= BIT4+BIT3+BIT2;
5923
5924 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5925 RegValue |= BIT5;
5926 if ( info->params.parity != ASYNC_PARITY_ODD )
5927 RegValue |= BIT6;
5928 }
5929
5930 usc_OutReg( info, RMR, RegValue );
5931
5932
5933 /* Set IRQ trigger level */
5934
5935 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5936
5937
5938 /* Receive Interrupt Control Register (RICR)
5939 *
5940 * <15..8> ? RxFIFO IRQ Request Level
5941 *
5942 * Note: For async mode the receive FIFO level must be set
Alexey Dobriyan7f927fc2006-03-28 01:56:53 -08005943 * to 0 to avoid the situation where the FIFO contains fewer bytes
Linus Torvalds1da177e2005-04-16 15:20:36 -07005944 * than the trigger level and no more data is expected.
5945 *
5946 * <7> 0 Exited Hunt IA (Interrupt Arm)
5947 * <6> 0 Idle Received IA
5948 * <5> 0 Break/Abort IA
5949 * <4> 0 Rx Bound IA
5950 * <3> 0 Queued status reflects oldest byte in FIFO
5951 * <2> 0 Abort/PE IA
5952 * <1> 0 Rx Overrun IA
5953 * <0> 0 Select TC0 value for readback
5954 *
5955 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
5956 */
5957
5958 usc_OutReg( info, RICR, 0x0000 );
5959
5960 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5961 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
5962
5963
5964 /* Transmit mode Register (TMR)
5965 *
5966 * <15..13> 000 encoding = None
5967 * <12..08> 00000 reserved (Sync Only)
5968 * <7..6> 00 Transmit parity Even
5969 * <5> 0 Transmit parity Disabled
5970 * <4..2> 000 Tx Char Length = 8 bits
5971 * <1..0> 00 Disable Transmitter
5972 *
5973 * 0000 0000 0000 0000 = 0x0
5974 */
5975
5976 RegValue = 0;
5977
5978 if ( info->params.data_bits != 8 )
5979 RegValue |= BIT4+BIT3+BIT2;
5980
5981 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5982 RegValue |= BIT5;
5983 if ( info->params.parity != ASYNC_PARITY_ODD )
5984 RegValue |= BIT6;
5985 }
5986
5987 usc_OutReg( info, TMR, RegValue );
5988
5989 usc_set_txidle( info );
5990
5991
5992 /* Set IRQ trigger level */
5993
5994 usc_TCmd( info, TCmd_SelectTicrIntLevel );
5995
5996
5997 /* Transmit Interrupt Control Register (TICR)
5998 *
5999 * <15..8> ? Transmit FIFO IRQ Level
6000 * <7> 0 Present IA (Interrupt Arm)
6001 * <6> 1 Idle Sent IA
6002 * <5> 0 Abort Sent IA
6003 * <4> 0 EOF/EOM Sent IA
6004 * <3> 0 CRC Sent IA
6005 * <2> 0 1 = Wait for SW Trigger to Start Frame
6006 * <1> 0 Tx Underrun IA
6007 * <0> 0 TC0 constant on read back
6008 *
6009 * 0000 0000 0100 0000 = 0x0040
6010 */
6011
6012 usc_OutReg( info, TICR, 0x1f40 );
6013
6014 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
6015 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
6016
6017 usc_enable_async_clock( info, info->params.data_rate );
6018
6019
6020 /* Channel Control/status Register (CCSR)
6021 *
6022 * <15> X RCC FIFO Overflow status (RO)
6023 * <14> X RCC FIFO Not Empty status (RO)
6024 * <13> 0 1 = Clear RCC FIFO (WO)
6025 * <12> X DPLL in Sync status (RO)
6026 * <11> X DPLL 2 Missed Clocks status (RO)
6027 * <10> X DPLL 1 Missed Clock status (RO)
6028 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6029 * <7> X SDLC Loop On status (RO)
6030 * <6> X SDLC Loop Send status (RO)
6031 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6032 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6033 * <1..0> 00 reserved
6034 *
6035 * 0000 0000 0010 0000 = 0x0020
6036 */
6037
6038 usc_OutReg( info, CCSR, 0x0020 );
6039
6040 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6041 RECEIVE_DATA + RECEIVE_STATUS );
6042
6043 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6044 RECEIVE_DATA + RECEIVE_STATUS );
6045
6046 usc_EnableMasterIrqBit( info );
6047
6048 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6049 /* Enable INTEN (Port 6, Bit12) */
6050 /* This connects the IRQ request signal to the ISA bus */
6051 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6052 }
6053
Paul Fulghum7c1fff52005-09-09 13:02:14 -07006054 if (info->params.loopback) {
6055 info->loopback_bits = 0x300;
6056 outw(0x0300, info->io_base + CCAR);
6057 }
6058
Linus Torvalds1da177e2005-04-16 15:20:36 -07006059} /* end of usc_set_async_mode() */
6060
6061/* usc_loopback_frame()
6062 *
6063 * Loop back a small (2 byte) dummy SDLC frame.
6064 * Interrupts and DMA are NOT used. The purpose of this is to
6065 * clear any 'stale' status info left over from running in async mode.
6066 *
6067 * The 16C32 shows the strange behaviour of marking the 1st
6068 * received SDLC frame with a CRC error even when there is no
6069 * CRC error. To get around this a small dummy from of 2 bytes
6070 * is looped back when switching from async to sync mode.
6071 *
6072 * Arguments: info pointer to device instance data
6073 * Return Value: None
6074 */
6075static void usc_loopback_frame( struct mgsl_struct *info )
6076{
6077 int i;
6078 unsigned long oldmode = info->params.mode;
6079
6080 info->params.mode = MGSL_MODE_HDLC;
6081
6082 usc_DisableMasterIrqBit( info );
6083
6084 usc_set_sdlc_mode( info );
6085 usc_enable_loopback( info, 1 );
6086
6087 /* Write 16-bit Time Constant for BRG0 */
6088 usc_OutReg( info, TC0R, 0 );
6089
6090 /* Channel Control Register (CCR)
6091 *
6092 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6093 * <13> 0 Trigger Tx on SW Command Disabled
6094 * <12> 0 Flag Preamble Disabled
6095 * <11..10> 00 Preamble Length = 8-Bits
6096 * <9..8> 01 Preamble Pattern = flags
6097 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6098 * <5> 0 Trigger Rx on SW Command Disabled
6099 * <4..0> 0 reserved
6100 *
6101 * 0000 0001 0000 0000 = 0x0100
6102 */
6103
6104 usc_OutReg( info, CCR, 0x0100 );
6105
6106 /* SETUP RECEIVER */
6107 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6108 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6109
6110 /* SETUP TRANSMITTER */
6111 /* Program the Transmit Character Length Register (TCLR) */
6112 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6113 usc_OutReg( info, TCLR, 2 );
6114 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6115
6116 /* unlatch Tx status bits, and start transmit channel. */
6117 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6118 outw(0,info->io_base + DATAREG);
6119
6120 /* ENABLE TRANSMITTER */
6121 usc_TCmd( info, TCmd_SendFrame );
6122 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6123
6124 /* WAIT FOR RECEIVE COMPLETE */
6125 for (i=0 ; i<1000 ; i++)
6126 if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
6127 break;
6128
6129 /* clear Internal Data loopback mode */
6130 usc_enable_loopback(info, 0);
6131
6132 usc_EnableMasterIrqBit(info);
6133
6134 info->params.mode = oldmode;
6135
6136} /* end of usc_loopback_frame() */
6137
6138/* usc_set_sync_mode() Programs the USC for SDLC communications.
6139 *
6140 * Arguments: info pointer to adapter info structure
6141 * Return Value: None
6142 */
6143static void usc_set_sync_mode( struct mgsl_struct *info )
6144{
6145 usc_loopback_frame( info );
6146 usc_set_sdlc_mode( info );
6147
6148 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6149 /* Enable INTEN (Port 6, Bit12) */
6150 /* This connects the IRQ request signal to the ISA bus */
6151 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6152 }
6153
6154 usc_enable_aux_clock(info, info->params.clock_speed);
6155
6156 if (info->params.loopback)
6157 usc_enable_loopback(info,1);
6158
6159} /* end of mgsl_set_sync_mode() */
6160
6161/* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6162 *
6163 * Arguments: info pointer to device instance data
6164 * Return Value: None
6165 */
6166static void usc_set_txidle( struct mgsl_struct *info )
6167{
6168 u16 usc_idle_mode = IDLEMODE_FLAGS;
6169
6170 /* Map API idle mode to USC register bits */
6171
6172 switch( info->idle_mode ){
6173 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6174 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6175 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6176 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6177 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6178 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6179 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6180 }
6181
6182 info->usc_idle_mode = usc_idle_mode;
6183 //usc_OutReg(info, TCSR, usc_idle_mode);
6184 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6185 info->tcsr_value += usc_idle_mode;
6186 usc_OutReg(info, TCSR, info->tcsr_value);
6187
6188 /*
6189 * if SyncLink WAN adapter is running in external sync mode, the
6190 * transmitter has been set to Monosync in order to try to mimic
6191 * a true raw outbound bit stream. Monosync still sends an open/close
6192 * sync char at the start/end of a frame. Try to match those sync
6193 * patterns to the idle mode set here
6194 */
6195 if ( info->params.mode == MGSL_MODE_RAW ) {
6196 unsigned char syncpat = 0;
6197 switch( info->idle_mode ) {
6198 case HDLC_TXIDLE_FLAGS:
6199 syncpat = 0x7e;
6200 break;
6201 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6202 syncpat = 0x55;
6203 break;
6204 case HDLC_TXIDLE_ZEROS:
6205 case HDLC_TXIDLE_SPACE:
6206 syncpat = 0x00;
6207 break;
6208 case HDLC_TXIDLE_ONES:
6209 case HDLC_TXIDLE_MARK:
6210 syncpat = 0xff;
6211 break;
6212 case HDLC_TXIDLE_ALT_MARK_SPACE:
6213 syncpat = 0xaa;
6214 break;
6215 }
6216
6217 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6218 }
6219
6220} /* end of usc_set_txidle() */
6221
6222/* usc_get_serial_signals()
6223 *
6224 * Query the adapter for the state of the V24 status (input) signals.
6225 *
6226 * Arguments: info pointer to device instance data
6227 * Return Value: None
6228 */
6229static void usc_get_serial_signals( struct mgsl_struct *info )
6230{
6231 u16 status;
6232
6233 /* clear all serial signals except DTR and RTS */
6234 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
6235
6236 /* Read the Misc Interrupt status Register (MISR) to get */
6237 /* the V24 status signals. */
6238
6239 status = usc_InReg( info, MISR );
6240
6241 /* set serial signal bits to reflect MISR */
6242
6243 if ( status & MISCSTATUS_CTS )
6244 info->serial_signals |= SerialSignal_CTS;
6245
6246 if ( status & MISCSTATUS_DCD )
6247 info->serial_signals |= SerialSignal_DCD;
6248
6249 if ( status & MISCSTATUS_RI )
6250 info->serial_signals |= SerialSignal_RI;
6251
6252 if ( status & MISCSTATUS_DSR )
6253 info->serial_signals |= SerialSignal_DSR;
6254
6255} /* end of usc_get_serial_signals() */
6256
6257/* usc_set_serial_signals()
6258 *
6259 * Set the state of DTR and RTS based on contents of
6260 * serial_signals member of device extension.
6261 *
6262 * Arguments: info pointer to device instance data
6263 * Return Value: None
6264 */
6265static void usc_set_serial_signals( struct mgsl_struct *info )
6266{
6267 u16 Control;
6268 unsigned char V24Out = info->serial_signals;
6269
6270 /* get the current value of the Port Control Register (PCR) */
6271
6272 Control = usc_InReg( info, PCR );
6273
6274 if ( V24Out & SerialSignal_RTS )
6275 Control &= ~(BIT6);
6276 else
6277 Control |= BIT6;
6278
6279 if ( V24Out & SerialSignal_DTR )
6280 Control &= ~(BIT4);
6281 else
6282 Control |= BIT4;
6283
6284 usc_OutReg( info, PCR, Control );
6285
6286} /* end of usc_set_serial_signals() */
6287
6288/* usc_enable_async_clock()
6289 *
6290 * Enable the async clock at the specified frequency.
6291 *
6292 * Arguments: info pointer to device instance data
6293 * data_rate data rate of clock in bps
6294 * 0 disables the AUX clock.
6295 * Return Value: None
6296 */
6297static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6298{
6299 if ( data_rate ) {
6300 /*
6301 * Clock mode Control Register (CMCR)
6302 *
6303 * <15..14> 00 counter 1 Disabled
6304 * <13..12> 00 counter 0 Disabled
6305 * <11..10> 11 BRG1 Input is TxC Pin
6306 * <9..8> 11 BRG0 Input is TxC Pin
6307 * <7..6> 01 DPLL Input is BRG1 Output
6308 * <5..3> 100 TxCLK comes from BRG0
6309 * <2..0> 100 RxCLK comes from BRG0
6310 *
6311 * 0000 1111 0110 0100 = 0x0f64
6312 */
6313
6314 usc_OutReg( info, CMCR, 0x0f64 );
6315
6316
6317 /*
6318 * Write 16-bit Time Constant for BRG0
6319 * Time Constant = (ClkSpeed / data_rate) - 1
6320 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6321 */
6322
6323 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6324 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6325 else
6326 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6327
6328
6329 /*
6330 * Hardware Configuration Register (HCR)
6331 * Clear Bit 1, BRG0 mode = Continuous
6332 * Set Bit 0 to enable BRG0.
6333 */
6334
6335 usc_OutReg( info, HCR,
6336 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6337
6338
6339 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6340
6341 usc_OutReg( info, IOCR,
6342 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6343 } else {
6344 /* data rate == 0 so turn off BRG0 */
6345 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6346 }
6347
6348} /* end of usc_enable_async_clock() */
6349
6350/*
6351 * Buffer Structures:
6352 *
6353 * Normal memory access uses virtual addresses that can make discontiguous
6354 * physical memory pages appear to be contiguous in the virtual address
6355 * space (the processors memory mapping handles the conversions).
6356 *
6357 * DMA transfers require physically contiguous memory. This is because
6358 * the DMA system controller and DMA bus masters deal with memory using
6359 * only physical addresses.
6360 *
6361 * This causes a problem under Windows NT when large DMA buffers are
6362 * needed. Fragmentation of the nonpaged pool prevents allocations of
6363 * physically contiguous buffers larger than the PAGE_SIZE.
6364 *
6365 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6366 * allows DMA transfers to physically discontiguous buffers. Information
6367 * about each data transfer buffer is contained in a memory structure
6368 * called a 'buffer entry'. A list of buffer entries is maintained
6369 * to track and control the use of the data transfer buffers.
6370 *
6371 * To support this strategy we will allocate sufficient PAGE_SIZE
6372 * contiguous memory buffers to allow for the total required buffer
6373 * space.
6374 *
6375 * The 16C32 accesses the list of buffer entries using Bus Master
6376 * DMA. Control information is read from the buffer entries by the
6377 * 16C32 to control data transfers. status information is written to
6378 * the buffer entries by the 16C32 to indicate the status of completed
6379 * transfers.
6380 *
6381 * The CPU writes control information to the buffer entries to control
6382 * the 16C32 and reads status information from the buffer entries to
6383 * determine information about received and transmitted frames.
6384 *
6385 * Because the CPU and 16C32 (adapter) both need simultaneous access
6386 * to the buffer entries, the buffer entry memory is allocated with
6387 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6388 * entry list to PAGE_SIZE.
6389 *
6390 * The actual data buffers on the other hand will only be accessed
6391 * by the CPU or the adapter but not by both simultaneously. This allows
6392 * Scatter/Gather packet based DMA procedures for using physically
6393 * discontiguous pages.
6394 */
6395
6396/*
6397 * mgsl_reset_tx_dma_buffers()
6398 *
6399 * Set the count for all transmit buffers to 0 to indicate the
6400 * buffer is available for use and set the current buffer to the
6401 * first buffer. This effectively makes all buffers free and
6402 * discards any data in buffers.
6403 *
6404 * Arguments: info pointer to device instance data
6405 * Return Value: None
6406 */
6407static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6408{
6409 unsigned int i;
6410
6411 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6412 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6413 }
6414
6415 info->current_tx_buffer = 0;
6416 info->start_tx_dma_buffer = 0;
6417 info->tx_dma_buffers_used = 0;
6418
6419 info->get_tx_holding_index = 0;
6420 info->put_tx_holding_index = 0;
6421 info->tx_holding_count = 0;
6422
6423} /* end of mgsl_reset_tx_dma_buffers() */
6424
6425/*
6426 * num_free_tx_dma_buffers()
6427 *
6428 * returns the number of free tx dma buffers available
6429 *
6430 * Arguments: info pointer to device instance data
6431 * Return Value: number of free tx dma buffers
6432 */
6433static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6434{
6435 return info->tx_buffer_count - info->tx_dma_buffers_used;
6436}
6437
6438/*
6439 * mgsl_reset_rx_dma_buffers()
6440 *
6441 * Set the count for all receive buffers to DMABUFFERSIZE
6442 * and set the current buffer to the first buffer. This effectively
6443 * makes all buffers free and discards any data in buffers.
6444 *
6445 * Arguments: info pointer to device instance data
6446 * Return Value: None
6447 */
6448static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6449{
6450 unsigned int i;
6451
6452 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6453 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6454// info->rx_buffer_list[i].count = DMABUFFERSIZE;
6455// info->rx_buffer_list[i].status = 0;
6456 }
6457
6458 info->current_rx_buffer = 0;
6459
6460} /* end of mgsl_reset_rx_dma_buffers() */
6461
6462/*
6463 * mgsl_free_rx_frame_buffers()
6464 *
6465 * Free the receive buffers used by a received SDLC
6466 * frame such that the buffers can be reused.
6467 *
6468 * Arguments:
6469 *
6470 * info pointer to device instance data
6471 * StartIndex index of 1st receive buffer of frame
6472 * EndIndex index of last receive buffer of frame
6473 *
6474 * Return Value: None
6475 */
6476static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6477{
Joe Perches0fab6de2008-04-28 02:14:02 -07006478 bool Done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006479 DMABUFFERENTRY *pBufEntry;
6480 unsigned int Index;
6481
6482 /* Starting with 1st buffer entry of the frame clear the status */
6483 /* field and set the count field to DMA Buffer Size. */
6484
6485 Index = StartIndex;
6486
6487 while( !Done ) {
6488 pBufEntry = &(info->rx_buffer_list[Index]);
6489
6490 if ( Index == EndIndex ) {
6491 /* This is the last buffer of the frame! */
Joe Perches0fab6de2008-04-28 02:14:02 -07006492 Done = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006493 }
6494
6495 /* reset current buffer for reuse */
6496// pBufEntry->status = 0;
6497// pBufEntry->count = DMABUFFERSIZE;
6498 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6499
6500 /* advance to next buffer entry in linked list */
6501 Index++;
6502 if ( Index == info->rx_buffer_count )
6503 Index = 0;
6504 }
6505
6506 /* set current buffer to next buffer after last buffer of frame */
6507 info->current_rx_buffer = Index;
6508
6509} /* end of free_rx_frame_buffers() */
6510
6511/* mgsl_get_rx_frame()
6512 *
6513 * This function attempts to return a received SDLC frame from the
6514 * receive DMA buffers. Only frames received without errors are returned.
6515 *
6516 * Arguments: info pointer to device extension
Joe Perches0fab6de2008-04-28 02:14:02 -07006517 * Return Value: true if frame returned, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006518 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006519static bool mgsl_get_rx_frame(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07006520{
6521 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6522 unsigned short status;
6523 DMABUFFERENTRY *pBufEntry;
6524 unsigned int framesize = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07006525 bool ReturnCode = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006526 unsigned long flags;
Alan Cox8fb06c72008-07-16 21:56:46 +01006527 struct tty_struct *tty = info->port.tty;
Joe Perches0fab6de2008-04-28 02:14:02 -07006528 bool return_frame = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006529
6530 /*
6531 * current_rx_buffer points to the 1st buffer of the next available
6532 * receive frame. To find the last buffer of the frame look for
6533 * a non-zero status field in the buffer entries. (The status
6534 * field is set by the 16C32 after completing a receive frame.
6535 */
6536
6537 StartIndex = EndIndex = info->current_rx_buffer;
6538
6539 while( !info->rx_buffer_list[EndIndex].status ) {
6540 /*
6541 * If the count field of the buffer entry is non-zero then
6542 * this buffer has not been used. (The 16C32 clears the count
6543 * field when it starts using the buffer.) If an unused buffer
6544 * is encountered then there are no frames available.
6545 */
6546
6547 if ( info->rx_buffer_list[EndIndex].count )
6548 goto Cleanup;
6549
6550 /* advance to next buffer entry in linked list */
6551 EndIndex++;
6552 if ( EndIndex == info->rx_buffer_count )
6553 EndIndex = 0;
6554
6555 /* if entire list searched then no frame available */
6556 if ( EndIndex == StartIndex ) {
6557 /* If this occurs then something bad happened,
6558 * all buffers have been 'used' but none mark
6559 * the end of a frame. Reset buffers and receiver.
6560 */
6561
6562 if ( info->rx_enabled ){
6563 spin_lock_irqsave(&info->irq_spinlock,flags);
6564 usc_start_receiver(info);
6565 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6566 }
6567 goto Cleanup;
6568 }
6569 }
6570
6571
6572 /* check status of receive frame */
6573
6574 status = info->rx_buffer_list[EndIndex].status;
6575
6576 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6577 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6578 if ( status & RXSTATUS_SHORT_FRAME )
6579 info->icount.rxshort++;
6580 else if ( status & RXSTATUS_ABORT )
6581 info->icount.rxabort++;
6582 else if ( status & RXSTATUS_OVERRUN )
6583 info->icount.rxover++;
6584 else {
6585 info->icount.rxcrc++;
6586 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
Joe Perches0fab6de2008-04-28 02:14:02 -07006587 return_frame = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006588 }
6589 framesize = 0;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006590#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006591 {
Krzysztof Halasa198191c2008-06-30 23:26:53 +02006592 info->netdev->stats.rx_errors++;
6593 info->netdev->stats.rx_frame_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006594 }
6595#endif
6596 } else
Joe Perches0fab6de2008-04-28 02:14:02 -07006597 return_frame = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006598
6599 if ( return_frame ) {
6600 /* receive frame has no errors, get frame size.
6601 * The frame size is the starting value of the RCC (which was
6602 * set to 0xffff) minus the ending value of the RCC (decremented
6603 * once for each receive character) minus 2 for the 16-bit CRC.
6604 */
6605
6606 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6607
6608 /* adjust frame size for CRC if any */
6609 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6610 framesize -= 2;
6611 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6612 framesize -= 4;
6613 }
6614
6615 if ( debug_level >= DEBUG_LEVEL_BH )
6616 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6617 __FILE__,__LINE__,info->device_name,status,framesize);
6618
6619 if ( debug_level >= DEBUG_LEVEL_DATA )
6620 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6621 min_t(int, framesize, DMABUFFERSIZE),0);
6622
6623 if (framesize) {
6624 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6625 ((framesize+1) > info->max_frame_size) ) ||
6626 (framesize > info->max_frame_size) )
6627 info->icount.rxlong++;
6628 else {
6629 /* copy dma buffer(s) to contiguous intermediate buffer */
6630 int copy_count = framesize;
6631 int index = StartIndex;
6632 unsigned char *ptmp = info->intermediate_rxbuffer;
6633
6634 if ( !(status & RXSTATUS_CRC_ERROR))
6635 info->icount.rxok++;
6636
6637 while(copy_count) {
6638 int partial_count;
6639 if ( copy_count > DMABUFFERSIZE )
6640 partial_count = DMABUFFERSIZE;
6641 else
6642 partial_count = copy_count;
6643
6644 pBufEntry = &(info->rx_buffer_list[index]);
6645 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6646 ptmp += partial_count;
6647 copy_count -= partial_count;
6648
6649 if ( ++index == info->rx_buffer_count )
6650 index = 0;
6651 }
6652
6653 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6654 ++framesize;
6655 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6656 RX_CRC_ERROR :
6657 RX_OK);
6658
6659 if ( debug_level >= DEBUG_LEVEL_DATA )
6660 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6661 __FILE__,__LINE__,info->device_name,
6662 *ptmp);
6663 }
6664
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006665#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006666 if (info->netcount)
6667 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6668 else
6669#endif
6670 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6671 }
6672 }
6673 /* Free the buffers used by this frame. */
6674 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6675
Joe Perches0fab6de2008-04-28 02:14:02 -07006676 ReturnCode = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006677
6678Cleanup:
6679
6680 if ( info->rx_enabled && info->rx_overflow ) {
6681 /* The receiver needs to restarted because of
6682 * a receive overflow (buffer or FIFO). If the
6683 * receive buffers are now empty, then restart receiver.
6684 */
6685
6686 if ( !info->rx_buffer_list[EndIndex].status &&
6687 info->rx_buffer_list[EndIndex].count ) {
6688 spin_lock_irqsave(&info->irq_spinlock,flags);
6689 usc_start_receiver(info);
6690 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6691 }
6692 }
6693
6694 return ReturnCode;
6695
6696} /* end of mgsl_get_rx_frame() */
6697
6698/* mgsl_get_raw_rx_frame()
6699 *
6700 * This function attempts to return a received frame from the
6701 * receive DMA buffers when running in external loop mode. In this mode,
6702 * we will return at most one DMABUFFERSIZE frame to the application.
6703 * The USC receiver is triggering off of DCD going active to start a new
6704 * frame, and DCD going inactive to terminate the frame (similar to
6705 * processing a closing flag character).
6706 *
6707 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6708 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6709 * status field and the RCC field will indicate the length of the
6710 * entire received frame. We take this RCC field and get the modulus
6711 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6712 * last Rx DMA buffer and return that last portion of the frame.
6713 *
6714 * Arguments: info pointer to device extension
Joe Perches0fab6de2008-04-28 02:14:02 -07006715 * Return Value: true if frame returned, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006716 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006717static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07006718{
6719 unsigned int CurrentIndex, NextIndex;
6720 unsigned short status;
6721 DMABUFFERENTRY *pBufEntry;
6722 unsigned int framesize = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07006723 bool ReturnCode = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006724 unsigned long flags;
Alan Cox8fb06c72008-07-16 21:56:46 +01006725 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006726
6727 /*
6728 * current_rx_buffer points to the 1st buffer of the next available
6729 * receive frame. The status field is set by the 16C32 after
6730 * completing a receive frame. If the status field of this buffer
6731 * is zero, either the USC is still filling this buffer or this
6732 * is one of a series of buffers making up a received frame.
6733 *
6734 * If the count field of this buffer is zero, the USC is either
6735 * using this buffer or has used this buffer. Look at the count
6736 * field of the next buffer. If that next buffer's count is
6737 * non-zero, the USC is still actively using the current buffer.
6738 * Otherwise, if the next buffer's count field is zero, the
6739 * current buffer is complete and the USC is using the next
6740 * buffer.
6741 */
6742 CurrentIndex = NextIndex = info->current_rx_buffer;
6743 ++NextIndex;
6744 if ( NextIndex == info->rx_buffer_count )
6745 NextIndex = 0;
6746
6747 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6748 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6749 info->rx_buffer_list[NextIndex].count == 0)) {
6750 /*
6751 * Either the status field of this dma buffer is non-zero
6752 * (indicating the last buffer of a receive frame) or the next
6753 * buffer is marked as in use -- implying this buffer is complete
6754 * and an intermediate buffer for this received frame.
6755 */
6756
6757 status = info->rx_buffer_list[CurrentIndex].status;
6758
6759 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6760 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6761 if ( status & RXSTATUS_SHORT_FRAME )
6762 info->icount.rxshort++;
6763 else if ( status & RXSTATUS_ABORT )
6764 info->icount.rxabort++;
6765 else if ( status & RXSTATUS_OVERRUN )
6766 info->icount.rxover++;
6767 else
6768 info->icount.rxcrc++;
6769 framesize = 0;
6770 } else {
6771 /*
6772 * A receive frame is available, get frame size and status.
6773 *
6774 * The frame size is the starting value of the RCC (which was
6775 * set to 0xffff) minus the ending value of the RCC (decremented
6776 * once for each receive character) minus 2 or 4 for the 16-bit
6777 * or 32-bit CRC.
6778 *
6779 * If the status field is zero, this is an intermediate buffer.
6780 * It's size is 4K.
6781 *
6782 * If the DMA Buffer Entry's Status field is non-zero, the
6783 * receive operation completed normally (ie: DCD dropped). The
6784 * RCC field is valid and holds the received frame size.
6785 * It is possible that the RCC field will be zero on a DMA buffer
6786 * entry with a non-zero status. This can occur if the total
6787 * frame size (number of bytes between the time DCD goes active
6788 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6789 * case the 16C32 has underrun on the RCC count and appears to
6790 * stop updating this counter to let us know the actual received
6791 * frame size. If this happens (non-zero status and zero RCC),
6792 * simply return the entire RxDMA Buffer
6793 */
6794 if ( status ) {
6795 /*
6796 * In the event that the final RxDMA Buffer is
6797 * terminated with a non-zero status and the RCC
6798 * field is zero, we interpret this as the RCC
6799 * having underflowed (received frame > 65535 bytes).
6800 *
6801 * Signal the event to the user by passing back
6802 * a status of RxStatus_CrcError returning the full
6803 * buffer and let the app figure out what data is
6804 * actually valid
6805 */
6806 if ( info->rx_buffer_list[CurrentIndex].rcc )
6807 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6808 else
6809 framesize = DMABUFFERSIZE;
6810 }
6811 else
6812 framesize = DMABUFFERSIZE;
6813 }
6814
6815 if ( framesize > DMABUFFERSIZE ) {
6816 /*
6817 * if running in raw sync mode, ISR handler for
6818 * End Of Buffer events terminates all buffers at 4K.
6819 * If this frame size is said to be >4K, get the
6820 * actual number of bytes of the frame in this buffer.
6821 */
6822 framesize = framesize % DMABUFFERSIZE;
6823 }
6824
6825
6826 if ( debug_level >= DEBUG_LEVEL_BH )
6827 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6828 __FILE__,__LINE__,info->device_name,status,framesize);
6829
6830 if ( debug_level >= DEBUG_LEVEL_DATA )
6831 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6832 min_t(int, framesize, DMABUFFERSIZE),0);
6833
6834 if (framesize) {
6835 /* copy dma buffer(s) to contiguous intermediate buffer */
6836 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6837
6838 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6839 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6840 info->icount.rxok++;
6841
6842 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6843 }
6844
6845 /* Free the buffers used by this frame. */
6846 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6847
Joe Perches0fab6de2008-04-28 02:14:02 -07006848 ReturnCode = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006849 }
6850
6851
6852 if ( info->rx_enabled && info->rx_overflow ) {
6853 /* The receiver needs to restarted because of
6854 * a receive overflow (buffer or FIFO). If the
6855 * receive buffers are now empty, then restart receiver.
6856 */
6857
6858 if ( !info->rx_buffer_list[CurrentIndex].status &&
6859 info->rx_buffer_list[CurrentIndex].count ) {
6860 spin_lock_irqsave(&info->irq_spinlock,flags);
6861 usc_start_receiver(info);
6862 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6863 }
6864 }
6865
6866 return ReturnCode;
6867
6868} /* end of mgsl_get_raw_rx_frame() */
6869
6870/* mgsl_load_tx_dma_buffer()
6871 *
6872 * Load the transmit DMA buffer with the specified data.
6873 *
6874 * Arguments:
6875 *
6876 * info pointer to device extension
6877 * Buffer pointer to buffer containing frame to load
6878 * BufferSize size in bytes of frame in Buffer
6879 *
6880 * Return Value: None
6881 */
6882static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6883 const char *Buffer, unsigned int BufferSize)
6884{
6885 unsigned short Copycount;
6886 unsigned int i = 0;
6887 DMABUFFERENTRY *pBufEntry;
6888
6889 if ( debug_level >= DEBUG_LEVEL_DATA )
6890 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6891
6892 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6893 /* set CMR:13 to start transmit when
6894 * next GoAhead (abort) is received
6895 */
6896 info->cmr_value |= BIT13;
6897 }
6898
6899 /* begin loading the frame in the next available tx dma
6900 * buffer, remember it's starting location for setting
6901 * up tx dma operation
6902 */
6903 i = info->current_tx_buffer;
6904 info->start_tx_dma_buffer = i;
6905
6906 /* Setup the status and RCC (Frame Size) fields of the 1st */
6907 /* buffer entry in the transmit DMA buffer list. */
6908
6909 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6910 info->tx_buffer_list[i].rcc = BufferSize;
6911 info->tx_buffer_list[i].count = BufferSize;
6912
6913 /* Copy frame data from 1st source buffer to the DMA buffers. */
6914 /* The frame data may span multiple DMA buffers. */
6915
6916 while( BufferSize ){
6917 /* Get a pointer to next DMA buffer entry. */
6918 pBufEntry = &info->tx_buffer_list[i++];
6919
6920 if ( i == info->tx_buffer_count )
6921 i=0;
6922
6923 /* Calculate the number of bytes that can be copied from */
6924 /* the source buffer to this DMA buffer. */
6925 if ( BufferSize > DMABUFFERSIZE )
6926 Copycount = DMABUFFERSIZE;
6927 else
6928 Copycount = BufferSize;
6929
6930 /* Actually copy data from source buffer to DMA buffer. */
6931 /* Also set the data count for this individual DMA buffer. */
6932 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6933 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6934 else
6935 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6936
6937 pBufEntry->count = Copycount;
6938
6939 /* Advance source pointer and reduce remaining data count. */
6940 Buffer += Copycount;
6941 BufferSize -= Copycount;
6942
6943 ++info->tx_dma_buffers_used;
6944 }
6945
6946 /* remember next available tx dma buffer */
6947 info->current_tx_buffer = i;
6948
6949} /* end of mgsl_load_tx_dma_buffer() */
6950
6951/*
6952 * mgsl_register_test()
6953 *
6954 * Performs a register test of the 16C32.
6955 *
6956 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07006957 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006958 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006959static bool mgsl_register_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07006960{
6961 static unsigned short BitPatterns[] =
6962 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
Tobias Klauserfe971072006-01-09 20:54:02 -08006963 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07006964 unsigned int i;
Joe Perches0fab6de2008-04-28 02:14:02 -07006965 bool rc = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006966 unsigned long flags;
6967
6968 spin_lock_irqsave(&info->irq_spinlock,flags);
6969 usc_reset(info);
6970
6971 /* Verify the reset state of some registers. */
6972
6973 if ( (usc_InReg( info, SICR ) != 0) ||
6974 (usc_InReg( info, IVR ) != 0) ||
6975 (usc_InDmaReg( info, DIVR ) != 0) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07006976 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006977 }
6978
Joe Perches0fab6de2008-04-28 02:14:02 -07006979 if ( rc ){
Linus Torvalds1da177e2005-04-16 15:20:36 -07006980 /* Write bit patterns to various registers but do it out of */
6981 /* sync, then read back and verify values. */
6982
6983 for ( i = 0 ; i < Patterncount ; i++ ) {
6984 usc_OutReg( info, TC0R, BitPatterns[i] );
6985 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
6986 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
6987 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
6988 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
6989 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
6990
6991 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
6992 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
6993 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
6994 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
6995 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
6996 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07006997 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006998 break;
6999 }
7000 }
7001 }
7002
7003 usc_reset(info);
7004 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7005
7006 return rc;
7007
7008} /* end of mgsl_register_test() */
7009
7010/* mgsl_irq_test() Perform interrupt test of the 16C32.
7011 *
7012 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007013 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007014 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007015static bool mgsl_irq_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007016{
7017 unsigned long EndTime;
7018 unsigned long flags;
7019
7020 spin_lock_irqsave(&info->irq_spinlock,flags);
7021 usc_reset(info);
7022
7023 /*
7024 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
Joe Perches0fab6de2008-04-28 02:14:02 -07007025 * The ISR sets irq_occurred to true.
Linus Torvalds1da177e2005-04-16 15:20:36 -07007026 */
7027
Joe Perches0fab6de2008-04-28 02:14:02 -07007028 info->irq_occurred = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007029
7030 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7031 /* Enable INTEN (Port 6, Bit12) */
7032 /* This connects the IRQ request signal to the ISA bus */
7033 /* on the ISA adapter. This has no effect for the PCI adapter */
7034 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7035
7036 usc_EnableMasterIrqBit(info);
7037 usc_EnableInterrupts(info, IO_PIN);
7038 usc_ClearIrqPendingBits(info, IO_PIN);
7039
7040 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7041 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7042
7043 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7044
7045 EndTime=100;
7046 while( EndTime-- && !info->irq_occurred ) {
7047 msleep_interruptible(10);
7048 }
7049
7050 spin_lock_irqsave(&info->irq_spinlock,flags);
7051 usc_reset(info);
7052 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7053
Joe Perches0fab6de2008-04-28 02:14:02 -07007054 return info->irq_occurred;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007055
7056} /* end of mgsl_irq_test() */
7057
7058/* mgsl_dma_test()
7059 *
7060 * Perform a DMA test of the 16C32. A small frame is
7061 * transmitted via DMA from a transmit buffer to a receive buffer
7062 * using single buffer DMA mode.
7063 *
7064 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007065 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007066 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007067static bool mgsl_dma_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007068{
7069 unsigned short FifoLevel;
7070 unsigned long phys_addr;
7071 unsigned int FrameSize;
7072 unsigned int i;
7073 char *TmpPtr;
Joe Perches0fab6de2008-04-28 02:14:02 -07007074 bool rc = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007075 unsigned short status=0;
7076 unsigned long EndTime;
7077 unsigned long flags;
7078 MGSL_PARAMS tmp_params;
7079
7080 /* save current port options */
7081 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7082 /* load default port options */
7083 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7084
7085#define TESTFRAMESIZE 40
7086
7087 spin_lock_irqsave(&info->irq_spinlock,flags);
7088
7089 /* setup 16C32 for SDLC DMA transfer mode */
7090
7091 usc_reset(info);
7092 usc_set_sdlc_mode(info);
7093 usc_enable_loopback(info,1);
7094
7095 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7096 * field of the buffer entry after fetching buffer address. This
7097 * way we can detect a DMA failure for a DMA read (which should be
7098 * non-destructive to system memory) before we try and write to
7099 * memory (where a failure could corrupt system memory).
7100 */
7101
7102 /* Receive DMA mode Register (RDMR)
7103 *
7104 * <15..14> 11 DMA mode = Linked List Buffer mode
7105 * <13> 1 RSBinA/L = store Rx status Block in List entry
7106 * <12> 0 1 = Clear count of List Entry after fetching
7107 * <11..10> 00 Address mode = Increment
7108 * <9> 1 Terminate Buffer on RxBound
7109 * <8> 0 Bus Width = 16bits
7110 * <7..0> ? status Bits (write as 0s)
7111 *
7112 * 1110 0010 0000 0000 = 0xe200
7113 */
7114
7115 usc_OutDmaReg( info, RDMR, 0xe200 );
7116
7117 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7118
7119
7120 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7121
7122 FrameSize = TESTFRAMESIZE;
7123
7124 /* setup 1st transmit buffer entry: */
7125 /* with frame size and transmit control word */
7126
7127 info->tx_buffer_list[0].count = FrameSize;
7128 info->tx_buffer_list[0].rcc = FrameSize;
7129 info->tx_buffer_list[0].status = 0x4000;
7130
7131 /* build a transmit frame in 1st transmit DMA buffer */
7132
7133 TmpPtr = info->tx_buffer_list[0].virt_addr;
7134 for (i = 0; i < FrameSize; i++ )
7135 *TmpPtr++ = i;
7136
7137 /* setup 1st receive buffer entry: */
7138 /* clear status, set max receive buffer size */
7139
7140 info->rx_buffer_list[0].status = 0;
7141 info->rx_buffer_list[0].count = FrameSize + 4;
7142
7143 /* zero out the 1st receive buffer */
7144
7145 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7146
7147 /* Set count field of next buffer entries to prevent */
7148 /* 16C32 from using buffers after the 1st one. */
7149
7150 info->tx_buffer_list[1].count = 0;
7151 info->rx_buffer_list[1].count = 0;
7152
7153
7154 /***************************/
7155 /* Program 16C32 receiver. */
7156 /***************************/
7157
7158 spin_lock_irqsave(&info->irq_spinlock,flags);
7159
7160 /* setup DMA transfers */
7161 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7162
7163 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7164 phys_addr = info->rx_buffer_list[0].phys_entry;
7165 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7166 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7167
7168 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7169 usc_InDmaReg( info, RDMR );
7170 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7171
7172 /* Enable Receiver (RMR <1..0> = 10) */
7173 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7174
7175 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7176
7177
7178 /*************************************************************/
7179 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7180 /*************************************************************/
7181
7182 /* Wait 100ms for interrupt. */
7183 EndTime = jiffies + msecs_to_jiffies(100);
7184
7185 for(;;) {
7186 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007187 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007188 break;
7189 }
7190
7191 spin_lock_irqsave(&info->irq_spinlock,flags);
7192 status = usc_InDmaReg( info, RDMR );
7193 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7194
7195 if ( !(status & BIT4) && (status & BIT5) ) {
7196 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7197 /* BUSY (BIT 5) is active (channel still active). */
7198 /* This means the buffer entry read has completed. */
7199 break;
7200 }
7201 }
7202
7203
7204 /******************************/
7205 /* Program 16C32 transmitter. */
7206 /******************************/
7207
7208 spin_lock_irqsave(&info->irq_spinlock,flags);
7209
7210 /* Program the Transmit Character Length Register (TCLR) */
7211 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7212
7213 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7214 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7215
7216 /* Program the address of the 1st DMA Buffer Entry in linked list */
7217
7218 phys_addr = info->tx_buffer_list[0].phys_entry;
7219 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7220 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7221
7222 /* unlatch Tx status bits, and start transmit channel. */
7223
7224 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7225 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7226
7227 /* wait for DMA controller to fill transmit FIFO */
7228
7229 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7230
7231 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7232
7233
7234 /**********************************/
7235 /* WAIT FOR TRANSMIT FIFO TO FILL */
7236 /**********************************/
7237
7238 /* Wait 100ms */
7239 EndTime = jiffies + msecs_to_jiffies(100);
7240
7241 for(;;) {
7242 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007243 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007244 break;
7245 }
7246
7247 spin_lock_irqsave(&info->irq_spinlock,flags);
7248 FifoLevel = usc_InReg(info, TICR) >> 8;
7249 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7250
7251 if ( FifoLevel < 16 )
7252 break;
7253 else
7254 if ( FrameSize < 32 ) {
7255 /* This frame is smaller than the entire transmit FIFO */
7256 /* so wait for the entire frame to be loaded. */
7257 if ( FifoLevel <= (32 - FrameSize) )
7258 break;
7259 }
7260 }
7261
7262
Joe Perches0fab6de2008-04-28 02:14:02 -07007263 if ( rc )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007264 {
7265 /* Enable 16C32 transmitter. */
7266
7267 spin_lock_irqsave(&info->irq_spinlock,flags);
7268
7269 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7270 usc_TCmd( info, TCmd_SendFrame );
7271 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7272
7273 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7274
7275
7276 /******************************/
7277 /* WAIT FOR TRANSMIT COMPLETE */
7278 /******************************/
7279
7280 /* Wait 100ms */
7281 EndTime = jiffies + msecs_to_jiffies(100);
7282
7283 /* While timer not expired wait for transmit complete */
7284
7285 spin_lock_irqsave(&info->irq_spinlock,flags);
7286 status = usc_InReg( info, TCSR );
7287 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7288
7289 while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
7290 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007291 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007292 break;
7293 }
7294
7295 spin_lock_irqsave(&info->irq_spinlock,flags);
7296 status = usc_InReg( info, TCSR );
7297 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7298 }
7299 }
7300
7301
Joe Perches0fab6de2008-04-28 02:14:02 -07007302 if ( rc ){
Linus Torvalds1da177e2005-04-16 15:20:36 -07007303 /* CHECK FOR TRANSMIT ERRORS */
7304 if ( status & (BIT5 + BIT1) )
Joe Perches0fab6de2008-04-28 02:14:02 -07007305 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007306 }
7307
Joe Perches0fab6de2008-04-28 02:14:02 -07007308 if ( rc ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007309 /* WAIT FOR RECEIVE COMPLETE */
7310
7311 /* Wait 100ms */
7312 EndTime = jiffies + msecs_to_jiffies(100);
7313
7314 /* Wait for 16C32 to write receive status to buffer entry. */
7315 status=info->rx_buffer_list[0].status;
7316 while ( status == 0 ) {
7317 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007318 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007319 break;
7320 }
7321 status=info->rx_buffer_list[0].status;
7322 }
7323 }
7324
7325
Joe Perches0fab6de2008-04-28 02:14:02 -07007326 if ( rc ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007327 /* CHECK FOR RECEIVE ERRORS */
7328 status = info->rx_buffer_list[0].status;
7329
7330 if ( status & (BIT8 + BIT3 + BIT1) ) {
7331 /* receive error has occurred */
Joe Perches0fab6de2008-04-28 02:14:02 -07007332 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007333 } else {
7334 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7335 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07007336 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007337 }
7338 }
7339 }
7340
7341 spin_lock_irqsave(&info->irq_spinlock,flags);
7342 usc_reset( info );
7343 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7344
7345 /* restore current port options */
7346 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7347
7348 return rc;
7349
7350} /* end of mgsl_dma_test() */
7351
7352/* mgsl_adapter_test()
7353 *
7354 * Perform the register, IRQ, and DMA tests for the 16C32.
7355 *
7356 * Arguments: info pointer to device instance data
7357 * Return Value: 0 if success, otherwise -ENODEV
7358 */
7359static int mgsl_adapter_test( struct mgsl_struct *info )
7360{
7361 if ( debug_level >= DEBUG_LEVEL_INFO )
7362 printk( "%s(%d):Testing device %s\n",
7363 __FILE__,__LINE__,info->device_name );
7364
7365 if ( !mgsl_register_test( info ) ) {
7366 info->init_error = DiagStatus_AddressFailure;
7367 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7368 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7369 return -ENODEV;
7370 }
7371
7372 if ( !mgsl_irq_test( info ) ) {
7373 info->init_error = DiagStatus_IrqFailure;
7374 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7375 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7376 return -ENODEV;
7377 }
7378
7379 if ( !mgsl_dma_test( info ) ) {
7380 info->init_error = DiagStatus_DmaFailure;
7381 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7382 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7383 return -ENODEV;
7384 }
7385
7386 if ( debug_level >= DEBUG_LEVEL_INFO )
7387 printk( "%s(%d):device %s passed diagnostics\n",
7388 __FILE__,__LINE__,info->device_name );
7389
7390 return 0;
7391
7392} /* end of mgsl_adapter_test() */
7393
7394/* mgsl_memory_test()
7395 *
7396 * Test the shared memory on a PCI adapter.
7397 *
7398 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007399 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007400 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007401static bool mgsl_memory_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007402{
Tobias Klauserfe971072006-01-09 20:54:02 -08007403 static unsigned long BitPatterns[] =
7404 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7405 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007406 unsigned long i;
7407 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7408 unsigned long * TestAddr;
7409
7410 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
Joe Perches0fab6de2008-04-28 02:14:02 -07007411 return true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007412
7413 TestAddr = (unsigned long *)info->memory_base;
7414
7415 /* Test data lines with test pattern at one location. */
7416
7417 for ( i = 0 ; i < Patterncount ; i++ ) {
7418 *TestAddr = BitPatterns[i];
7419 if ( *TestAddr != BitPatterns[i] )
Joe Perches0fab6de2008-04-28 02:14:02 -07007420 return false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007421 }
7422
7423 /* Test address lines with incrementing pattern over */
7424 /* entire address range. */
7425
7426 for ( i = 0 ; i < TestLimit ; i++ ) {
7427 *TestAddr = i * 4;
7428 TestAddr++;
7429 }
7430
7431 TestAddr = (unsigned long *)info->memory_base;
7432
7433 for ( i = 0 ; i < TestLimit ; i++ ) {
7434 if ( *TestAddr != i * 4 )
Joe Perches0fab6de2008-04-28 02:14:02 -07007435 return false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007436 TestAddr++;
7437 }
7438
7439 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7440
Joe Perches0fab6de2008-04-28 02:14:02 -07007441 return true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007442
7443} /* End Of mgsl_memory_test() */
7444
7445
7446/* mgsl_load_pci_memory()
7447 *
7448 * Load a large block of data into the PCI shared memory.
7449 * Use this instead of memcpy() or memmove() to move data
7450 * into the PCI shared memory.
7451 *
7452 * Notes:
7453 *
7454 * This function prevents the PCI9050 interface chip from hogging
7455 * the adapter local bus, which can starve the 16C32 by preventing
7456 * 16C32 bus master cycles.
7457 *
7458 * The PCI9050 documentation says that the 9050 will always release
7459 * control of the local bus after completing the current read
7460 * or write operation.
7461 *
7462 * It appears that as long as the PCI9050 write FIFO is full, the
7463 * PCI9050 treats all of the writes as a single burst transaction
7464 * and will not release the bus. This causes DMA latency problems
7465 * at high speeds when copying large data blocks to the shared
7466 * memory.
7467 *
7468 * This function in effect, breaks the a large shared memory write
7469 * into multiple transations by interleaving a shared memory read
7470 * which will flush the write FIFO and 'complete' the write
7471 * transation. This allows any pending DMA request to gain control
7472 * of the local bus in a timely fasion.
7473 *
7474 * Arguments:
7475 *
7476 * TargetPtr pointer to target address in PCI shared memory
7477 * SourcePtr pointer to source buffer for data
7478 * count count in bytes of data to copy
7479 *
7480 * Return Value: None
7481 */
7482static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7483 unsigned short count )
7484{
7485 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7486#define PCI_LOAD_INTERVAL 64
7487
7488 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7489 unsigned short Index;
7490 unsigned long Dummy;
7491
7492 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7493 {
7494 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7495 Dummy = *((volatile unsigned long *)TargetPtr);
7496 TargetPtr += PCI_LOAD_INTERVAL;
7497 SourcePtr += PCI_LOAD_INTERVAL;
7498 }
7499
7500 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7501
7502} /* End Of mgsl_load_pci_memory() */
7503
7504static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7505{
7506 int i;
7507 int linecount;
7508 if (xmit)
7509 printk("%s tx data:\n",info->device_name);
7510 else
7511 printk("%s rx data:\n",info->device_name);
7512
7513 while(count) {
7514 if (count > 16)
7515 linecount = 16;
7516 else
7517 linecount = count;
7518
7519 for(i=0;i<linecount;i++)
7520 printk("%02X ",(unsigned char)data[i]);
7521 for(;i<17;i++)
7522 printk(" ");
7523 for(i=0;i<linecount;i++) {
7524 if (data[i]>=040 && data[i]<=0176)
7525 printk("%c",data[i]);
7526 else
7527 printk(".");
7528 }
7529 printk("\n");
7530
7531 data += linecount;
7532 count -= linecount;
7533 }
7534} /* end of mgsl_trace_block() */
7535
7536/* mgsl_tx_timeout()
7537 *
7538 * called when HDLC frame times out
7539 * update stats and do tx completion processing
7540 *
7541 * Arguments: context pointer to device instance data
7542 * Return Value: None
7543 */
7544static void mgsl_tx_timeout(unsigned long context)
7545{
7546 struct mgsl_struct *info = (struct mgsl_struct*)context;
7547 unsigned long flags;
7548
7549 if ( debug_level >= DEBUG_LEVEL_INFO )
7550 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7551 __FILE__,__LINE__,info->device_name);
7552 if(info->tx_active &&
7553 (info->params.mode == MGSL_MODE_HDLC ||
7554 info->params.mode == MGSL_MODE_RAW) ) {
7555 info->icount.txtimeout++;
7556 }
7557 spin_lock_irqsave(&info->irq_spinlock,flags);
Joe Perches0fab6de2008-04-28 02:14:02 -07007558 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007559 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7560
7561 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7562 usc_loopmode_cancel_transmit( info );
7563
7564 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7565
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007566#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007567 if (info->netcount)
7568 hdlcdev_tx_done(info);
7569 else
7570#endif
7571 mgsl_bh_transmit(info);
7572
7573} /* end of mgsl_tx_timeout() */
7574
7575/* signal that there are no more frames to send, so that
7576 * line is 'released' by echoing RxD to TxD when current
7577 * transmission is complete (or immediately if no tx in progress).
7578 */
7579static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7580{
7581 unsigned long flags;
7582
7583 spin_lock_irqsave(&info->irq_spinlock,flags);
7584 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7585 if (info->tx_active)
Joe Perches0fab6de2008-04-28 02:14:02 -07007586 info->loopmode_send_done_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007587 else
7588 usc_loopmode_send_done(info);
7589 }
7590 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7591
7592 return 0;
7593}
7594
7595/* release the line by echoing RxD to TxD
7596 * upon completion of a transmit frame
7597 */
7598static void usc_loopmode_send_done( struct mgsl_struct * info )
7599{
Joe Perches0fab6de2008-04-28 02:14:02 -07007600 info->loopmode_send_done_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007601 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7602 info->cmr_value &= ~BIT13;
7603 usc_OutReg(info, CMR, info->cmr_value);
7604}
7605
7606/* abort a transmit in progress while in HDLC LoopMode
7607 */
7608static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7609{
7610 /* reset tx dma channel and purge TxFifo */
7611 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7612 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7613 usc_loopmode_send_done( info );
7614}
7615
7616/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7617 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7618 * we must clear CMR:13 to begin repeating TxData to RxData
7619 */
7620static void usc_loopmode_insert_request( struct mgsl_struct * info )
7621{
Joe Perches0fab6de2008-04-28 02:14:02 -07007622 info->loopmode_insert_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007623
7624 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7625 * begin repeating TxData on RxData (complete insertion)
7626 */
7627 usc_OutReg( info, RICR,
7628 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7629
7630 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7631 info->cmr_value |= BIT13;
7632 usc_OutReg(info, CMR, info->cmr_value);
7633}
7634
7635/* return 1 if station is inserted into the loop, otherwise 0
7636 */
7637static int usc_loopmode_active( struct mgsl_struct * info)
7638{
7639 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7640}
7641
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007642#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007643
7644/**
7645 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7646 * set encoding and frame check sequence (FCS) options
7647 *
7648 * dev pointer to network device structure
7649 * encoding serial encoding setting
7650 * parity FCS setting
7651 *
7652 * returns 0 if success, otherwise error code
7653 */
7654static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7655 unsigned short parity)
7656{
7657 struct mgsl_struct *info = dev_to_port(dev);
7658 unsigned char new_encoding;
7659 unsigned short new_crctype;
7660
7661 /* return error if TTY interface open */
Alan Cox8fb06c72008-07-16 21:56:46 +01007662 if (info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07007663 return -EBUSY;
7664
7665 switch (encoding)
7666 {
7667 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7668 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7669 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7670 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7671 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7672 default: return -EINVAL;
7673 }
7674
7675 switch (parity)
7676 {
7677 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7678 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7679 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7680 default: return -EINVAL;
7681 }
7682
7683 info->params.encoding = new_encoding;
Alexey Dobriyan53b35312006-03-24 03:16:13 -08007684 info->params.crc_type = new_crctype;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007685
7686 /* if network interface up, reprogram hardware */
7687 if (info->netcount)
7688 mgsl_program_hw(info);
7689
7690 return 0;
7691}
7692
7693/**
7694 * called by generic HDLC layer to send frame
7695 *
7696 * skb socket buffer containing HDLC frame
7697 * dev pointer to network device structure
Linus Torvalds1da177e2005-04-16 15:20:36 -07007698 */
Stephen Hemminger4c5d5022009-08-31 19:50:48 +00007699static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
7700 struct net_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07007701{
7702 struct mgsl_struct *info = dev_to_port(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007703 unsigned long flags;
7704
7705 if (debug_level >= DEBUG_LEVEL_INFO)
7706 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7707
7708 /* stop sending until this frame completes */
7709 netif_stop_queue(dev);
7710
7711 /* copy data to device buffers */
7712 info->xmit_cnt = skb->len;
7713 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7714
7715 /* update network statistics */
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007716 dev->stats.tx_packets++;
7717 dev->stats.tx_bytes += skb->len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007718
7719 /* done with socket buffer, so free it */
7720 dev_kfree_skb(skb);
7721
7722 /* save start time for transmit timeout detection */
7723 dev->trans_start = jiffies;
7724
7725 /* start hardware transmitter if necessary */
7726 spin_lock_irqsave(&info->irq_spinlock,flags);
7727 if (!info->tx_active)
7728 usc_start_transmitter(info);
7729 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7730
Stephen Hemminger4c5d5022009-08-31 19:50:48 +00007731 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007732}
7733
7734/**
7735 * called by network layer when interface enabled
7736 * claim resources and initialize hardware
7737 *
7738 * dev pointer to network device structure
7739 *
7740 * returns 0 if success, otherwise error code
7741 */
7742static int hdlcdev_open(struct net_device *dev)
7743{
7744 struct mgsl_struct *info = dev_to_port(dev);
7745 int rc;
7746 unsigned long flags;
7747
7748 if (debug_level >= DEBUG_LEVEL_INFO)
7749 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7750
7751 /* generic HDLC layer open processing */
7752 if ((rc = hdlc_open(dev)))
7753 return rc;
7754
7755 /* arbitrate between network and tty opens */
7756 spin_lock_irqsave(&info->netlock, flags);
Alan Cox8fb06c72008-07-16 21:56:46 +01007757 if (info->port.count != 0 || info->netcount != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007758 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7759 spin_unlock_irqrestore(&info->netlock, flags);
7760 return -EBUSY;
7761 }
7762 info->netcount=1;
7763 spin_unlock_irqrestore(&info->netlock, flags);
7764
7765 /* claim resources and init adapter */
7766 if ((rc = startup(info)) != 0) {
7767 spin_lock_irqsave(&info->netlock, flags);
7768 info->netcount=0;
7769 spin_unlock_irqrestore(&info->netlock, flags);
7770 return rc;
7771 }
7772
7773 /* assert DTR and RTS, apply hardware settings */
7774 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
7775 mgsl_program_hw(info);
7776
7777 /* enable network layer transmit */
7778 dev->trans_start = jiffies;
7779 netif_start_queue(dev);
7780
7781 /* inform generic HDLC layer of current DCD status */
7782 spin_lock_irqsave(&info->irq_spinlock, flags);
7783 usc_get_serial_signals(info);
7784 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07007785 if (info->serial_signals & SerialSignal_DCD)
7786 netif_carrier_on(dev);
7787 else
7788 netif_carrier_off(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007789 return 0;
7790}
7791
7792/**
7793 * called by network layer when interface is disabled
7794 * shutdown hardware and release resources
7795 *
7796 * dev pointer to network device structure
7797 *
7798 * returns 0 if success, otherwise error code
7799 */
7800static int hdlcdev_close(struct net_device *dev)
7801{
7802 struct mgsl_struct *info = dev_to_port(dev);
7803 unsigned long flags;
7804
7805 if (debug_level >= DEBUG_LEVEL_INFO)
7806 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7807
7808 netif_stop_queue(dev);
7809
7810 /* shutdown adapter and release resources */
7811 shutdown(info);
7812
7813 hdlc_close(dev);
7814
7815 spin_lock_irqsave(&info->netlock, flags);
7816 info->netcount=0;
7817 spin_unlock_irqrestore(&info->netlock, flags);
7818
7819 return 0;
7820}
7821
7822/**
7823 * called by network layer to process IOCTL call to network device
7824 *
7825 * dev pointer to network device structure
7826 * ifr pointer to network interface request structure
7827 * cmd IOCTL command code
7828 *
7829 * returns 0 if success, otherwise error code
7830 */
7831static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7832{
7833 const size_t size = sizeof(sync_serial_settings);
7834 sync_serial_settings new_line;
7835 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7836 struct mgsl_struct *info = dev_to_port(dev);
7837 unsigned int flags;
7838
7839 if (debug_level >= DEBUG_LEVEL_INFO)
7840 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7841
7842 /* return error if TTY interface open */
Alan Cox8fb06c72008-07-16 21:56:46 +01007843 if (info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07007844 return -EBUSY;
7845
7846 if (cmd != SIOCWANDEV)
7847 return hdlc_ioctl(dev, ifr, cmd);
7848
7849 switch(ifr->ifr_settings.type) {
7850 case IF_GET_IFACE: /* return current sync_serial_settings */
7851
7852 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7853 if (ifr->ifr_settings.size < size) {
7854 ifr->ifr_settings.size = size; /* data size wanted */
7855 return -ENOBUFS;
7856 }
7857
7858 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7859 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7860 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7861 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7862
7863 switch (flags){
7864 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7865 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7866 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7867 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7868 default: new_line.clock_type = CLOCK_DEFAULT;
7869 }
7870
7871 new_line.clock_rate = info->params.clock_speed;
7872 new_line.loopback = info->params.loopback ? 1:0;
7873
7874 if (copy_to_user(line, &new_line, size))
7875 return -EFAULT;
7876 return 0;
7877
7878 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7879
7880 if(!capable(CAP_NET_ADMIN))
7881 return -EPERM;
7882 if (copy_from_user(&new_line, line, size))
7883 return -EFAULT;
7884
7885 switch (new_line.clock_type)
7886 {
7887 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7888 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7889 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7890 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7891 case CLOCK_DEFAULT: flags = info->params.flags &
7892 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7893 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7894 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7895 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7896 default: return -EINVAL;
7897 }
7898
7899 if (new_line.loopback != 0 && new_line.loopback != 1)
7900 return -EINVAL;
7901
7902 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7903 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7904 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7905 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7906 info->params.flags |= flags;
7907
7908 info->params.loopback = new_line.loopback;
7909
7910 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7911 info->params.clock_speed = new_line.clock_rate;
7912 else
7913 info->params.clock_speed = 0;
7914
7915 /* if network interface up, reprogram hardware */
7916 if (info->netcount)
7917 mgsl_program_hw(info);
7918 return 0;
7919
7920 default:
7921 return hdlc_ioctl(dev, ifr, cmd);
7922 }
7923}
7924
7925/**
7926 * called by network layer when transmit timeout is detected
7927 *
7928 * dev pointer to network device structure
7929 */
7930static void hdlcdev_tx_timeout(struct net_device *dev)
7931{
7932 struct mgsl_struct *info = dev_to_port(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007933 unsigned long flags;
7934
7935 if (debug_level >= DEBUG_LEVEL_INFO)
7936 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7937
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007938 dev->stats.tx_errors++;
7939 dev->stats.tx_aborted_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007940
7941 spin_lock_irqsave(&info->irq_spinlock,flags);
7942 usc_stop_transmitter(info);
7943 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7944
7945 netif_wake_queue(dev);
7946}
7947
7948/**
7949 * called by device driver when transmit completes
7950 * reenable network layer transmit if stopped
7951 *
7952 * info pointer to device instance information
7953 */
7954static void hdlcdev_tx_done(struct mgsl_struct *info)
7955{
7956 if (netif_queue_stopped(info->netdev))
7957 netif_wake_queue(info->netdev);
7958}
7959
7960/**
7961 * called by device driver when frame received
7962 * pass frame to network layer
7963 *
7964 * info pointer to device instance information
7965 * buf pointer to buffer contianing frame data
7966 * size count of data bytes in buf
7967 */
7968static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
7969{
7970 struct sk_buff *skb = dev_alloc_skb(size);
7971 struct net_device *dev = info->netdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007972
7973 if (debug_level >= DEBUG_LEVEL_INFO)
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007974 printk("hdlcdev_rx(%s)\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007975
7976 if (skb == NULL) {
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007977 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
7978 dev->name);
7979 dev->stats.rx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007980 return;
7981 }
7982
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007983 memcpy(skb_put(skb, size), buf, size);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007984
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007985 skb->protocol = hdlc_type_trans(skb, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007986
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007987 dev->stats.rx_packets++;
7988 dev->stats.rx_bytes += size;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007989
7990 netif_rx(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007991}
7992
Krzysztof Hałasa991990a2009-01-08 22:52:11 +01007993static const struct net_device_ops hdlcdev_ops = {
7994 .ndo_open = hdlcdev_open,
7995 .ndo_stop = hdlcdev_close,
7996 .ndo_change_mtu = hdlc_change_mtu,
7997 .ndo_start_xmit = hdlc_start_xmit,
7998 .ndo_do_ioctl = hdlcdev_ioctl,
7999 .ndo_tx_timeout = hdlcdev_tx_timeout,
8000};
8001
Linus Torvalds1da177e2005-04-16 15:20:36 -07008002/**
8003 * called by device driver when adding device instance
8004 * do generic HDLC initialization
8005 *
8006 * info pointer to device instance information
8007 *
8008 * returns 0 if success, otherwise error code
8009 */
8010static int hdlcdev_init(struct mgsl_struct *info)
8011{
8012 int rc;
8013 struct net_device *dev;
8014 hdlc_device *hdlc;
8015
8016 /* allocate and initialize network and HDLC layer objects */
8017
8018 if (!(dev = alloc_hdlcdev(info))) {
8019 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8020 return -ENOMEM;
8021 }
8022
8023 /* for network layer reporting purposes only */
8024 dev->base_addr = info->io_base;
8025 dev->irq = info->irq_level;
8026 dev->dma = info->dma_level;
8027
8028 /* network layer callbacks and settings */
Krzysztof Hałasa991990a2009-01-08 22:52:11 +01008029 dev->netdev_ops = &hdlcdev_ops;
8030 dev->watchdog_timeo = 10 * HZ;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008031 dev->tx_queue_len = 50;
8032
8033 /* generic HDLC layer callbacks and settings */
8034 hdlc = dev_to_hdlc(dev);
8035 hdlc->attach = hdlcdev_attach;
8036 hdlc->xmit = hdlcdev_xmit;
8037
8038 /* register objects with HDLC layer */
8039 if ((rc = register_hdlc_device(dev))) {
8040 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8041 free_netdev(dev);
8042 return rc;
8043 }
8044
8045 info->netdev = dev;
8046 return 0;
8047}
8048
8049/**
8050 * called by device driver when removing device instance
8051 * do generic HDLC cleanup
8052 *
8053 * info pointer to device instance information
8054 */
8055static void hdlcdev_exit(struct mgsl_struct *info)
8056{
8057 unregister_hdlc_device(info->netdev);
8058 free_netdev(info->netdev);
8059 info->netdev = NULL;
8060}
8061
8062#endif /* CONFIG_HDLC */
8063
8064
8065static int __devinit synclink_init_one (struct pci_dev *dev,
8066 const struct pci_device_id *ent)
8067{
8068 struct mgsl_struct *info;
8069
8070 if (pci_enable_device(dev)) {
8071 printk("error enabling pci device %p\n", dev);
8072 return -EIO;
8073 }
8074
8075 if (!(info = mgsl_allocate_device())) {
8076 printk("can't allocate device instance data.\n");
8077 return -EIO;
8078 }
8079
8080 /* Copy user configuration info to device instance data */
8081
8082 info->io_base = pci_resource_start(dev, 2);
8083 info->irq_level = dev->irq;
8084 info->phys_memory_base = pci_resource_start(dev, 3);
8085
8086 /* Because veremap only works on page boundaries we must map
8087 * a larger area than is actually implemented for the LCR
8088 * memory range. We map a full page starting at the page boundary.
8089 */
8090 info->phys_lcr_base = pci_resource_start(dev, 0);
8091 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8092 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8093
8094 info->bus_type = MGSL_BUS_TYPE_PCI;
8095 info->io_addr_size = 8;
Thomas Gleixner0f2ed4c2006-07-01 19:29:33 -07008096 info->irq_flags = IRQF_SHARED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008097
8098 if (dev->device == 0x0210) {
8099 /* Version 1 PCI9030 based universal PCI adapter */
8100 info->misc_ctrl_value = 0x007c4080;
8101 info->hw_version = 1;
8102 } else {
8103 /* Version 0 PCI9050 based 5V PCI adapter
8104 * A PCI9050 bug prevents reading LCR registers if
8105 * LCR base address bit 7 is set. Maintain shadow
8106 * value so we can write to LCR misc control reg.
8107 */
8108 info->misc_ctrl_value = 0x087e4546;
8109 info->hw_version = 0;
8110 }
8111
8112 mgsl_add_device(info);
8113
8114 return 0;
8115}
8116
8117static void __devexit synclink_remove_one (struct pci_dev *dev)
8118{
8119}
8120