Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Seiko Instruments S-35390A RTC Driver |
| 3 | * |
| 4 | * Copyright (c) 2007 Byron Bradley |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version |
| 9 | * 2 of the License, or (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/rtc.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/bitrev.h> |
| 16 | #include <linux/bcd.h> |
| 17 | #include <linux/slab.h> |
| 18 | |
| 19 | #define S35390A_CMD_STATUS1 0 |
| 20 | #define S35390A_CMD_STATUS2 1 |
| 21 | #define S35390A_CMD_TIME1 2 |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 22 | #define S35390A_CMD_TIME2 3 |
| 23 | #define S35390A_CMD_INT2_REG1 5 |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 24 | |
| 25 | #define S35390A_BYTE_YEAR 0 |
| 26 | #define S35390A_BYTE_MONTH 1 |
| 27 | #define S35390A_BYTE_DAY 2 |
| 28 | #define S35390A_BYTE_WDAY 3 |
| 29 | #define S35390A_BYTE_HOURS 4 |
| 30 | #define S35390A_BYTE_MINS 5 |
| 31 | #define S35390A_BYTE_SECS 6 |
| 32 | |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 33 | #define S35390A_ALRM_BYTE_WDAY 0 |
| 34 | #define S35390A_ALRM_BYTE_HOURS 1 |
| 35 | #define S35390A_ALRM_BYTE_MINS 2 |
| 36 | |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 37 | #define S35390A_FLAG_POC 0x01 |
| 38 | #define S35390A_FLAG_BLD 0x02 |
| 39 | #define S35390A_FLAG_24H 0x40 |
| 40 | #define S35390A_FLAG_RESET 0x80 |
| 41 | #define S35390A_FLAG_TEST 0x01 |
| 42 | |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 43 | #define S35390A_INT2_MODE_MASK 0xF0 |
| 44 | |
| 45 | #define S35390A_INT2_MODE_NOINTR 0x00 |
| 46 | #define S35390A_INT2_MODE_FREQ 0x10 |
| 47 | #define S35390A_INT2_MODE_ALARM 0x40 |
| 48 | #define S35390A_INT2_MODE_PMIN_EDG 0x20 |
| 49 | |
Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 50 | static const struct i2c_device_id s35390a_id[] = { |
| 51 | { "s35390a", 0 }, |
| 52 | { } |
| 53 | }; |
| 54 | MODULE_DEVICE_TABLE(i2c, s35390a_id); |
| 55 | |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 56 | struct s35390a { |
| 57 | struct i2c_client *client[8]; |
| 58 | struct rtc_device *rtc; |
| 59 | int twentyfourhour; |
| 60 | }; |
| 61 | |
| 62 | static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len) |
| 63 | { |
| 64 | struct i2c_client *client = s35390a->client[reg]; |
| 65 | struct i2c_msg msg[] = { |
Shubhrajyoti D | 65659f6 | 2012-10-04 17:14:21 -0700 | [diff] [blame] | 66 | { |
| 67 | .addr = client->addr, |
| 68 | .len = len, |
| 69 | .buf = buf |
| 70 | }, |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 71 | }; |
| 72 | |
| 73 | if ((i2c_transfer(client->adapter, msg, 1)) != 1) |
| 74 | return -EIO; |
| 75 | |
| 76 | return 0; |
| 77 | } |
| 78 | |
| 79 | static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len) |
| 80 | { |
| 81 | struct i2c_client *client = s35390a->client[reg]; |
| 82 | struct i2c_msg msg[] = { |
Shubhrajyoti D | 65659f6 | 2012-10-04 17:14:21 -0700 | [diff] [blame] | 83 | { |
| 84 | .addr = client->addr, |
| 85 | .flags = I2C_M_RD, |
| 86 | .len = len, |
| 87 | .buf = buf |
| 88 | }, |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 89 | }; |
| 90 | |
| 91 | if ((i2c_transfer(client->adapter, msg, 1)) != 1) |
| 92 | return -EIO; |
| 93 | |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | static int s35390a_reset(struct s35390a *s35390a) |
| 98 | { |
| 99 | char buf[1]; |
| 100 | |
| 101 | if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0) |
| 102 | return -EIO; |
| 103 | |
| 104 | if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD))) |
| 105 | return 0; |
| 106 | |
| 107 | buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H); |
| 108 | buf[0] &= 0xf0; |
| 109 | return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); |
| 110 | } |
| 111 | |
| 112 | static int s35390a_disable_test_mode(struct s35390a *s35390a) |
| 113 | { |
| 114 | char buf[1]; |
| 115 | |
| 116 | if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0) |
| 117 | return -EIO; |
| 118 | |
| 119 | if (!(buf[0] & S35390A_FLAG_TEST)) |
| 120 | return 0; |
| 121 | |
| 122 | buf[0] &= ~S35390A_FLAG_TEST; |
| 123 | return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)); |
| 124 | } |
| 125 | |
| 126 | static char s35390a_hr2reg(struct s35390a *s35390a, int hour) |
| 127 | { |
| 128 | if (s35390a->twentyfourhour) |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 129 | return bin2bcd(hour); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 130 | |
| 131 | if (hour < 12) |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 132 | return bin2bcd(hour); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 133 | |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 134 | return 0x40 | bin2bcd(hour - 12); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 135 | } |
| 136 | |
| 137 | static int s35390a_reg2hr(struct s35390a *s35390a, char reg) |
| 138 | { |
| 139 | unsigned hour; |
| 140 | |
| 141 | if (s35390a->twentyfourhour) |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 142 | return bcd2bin(reg & 0x3f); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 143 | |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 144 | hour = bcd2bin(reg & 0x3f); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 145 | if (reg & 0x40) |
| 146 | hour += 12; |
| 147 | |
| 148 | return hour; |
| 149 | } |
| 150 | |
| 151 | static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 152 | { |
| 153 | struct s35390a *s35390a = i2c_get_clientdata(client); |
| 154 | int i, err; |
| 155 | char buf[7]; |
| 156 | |
| 157 | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, " |
| 158 | "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, |
| 159 | tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, |
| 160 | tm->tm_wday); |
| 161 | |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 162 | buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100); |
| 163 | buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1); |
| 164 | buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday); |
| 165 | buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 166 | buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour); |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 167 | buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min); |
| 168 | buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 169 | |
| 170 | /* This chip expects the bits of each byte to be in reverse order */ |
| 171 | for (i = 0; i < 7; ++i) |
| 172 | buf[i] = bitrev8(buf[i]); |
| 173 | |
| 174 | err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf)); |
| 175 | |
| 176 | return err; |
| 177 | } |
| 178 | |
| 179 | static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 180 | { |
| 181 | struct s35390a *s35390a = i2c_get_clientdata(client); |
| 182 | char buf[7]; |
| 183 | int i, err; |
| 184 | |
| 185 | err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf)); |
| 186 | if (err < 0) |
| 187 | return err; |
| 188 | |
| 189 | /* This chip returns the bits of each byte in reverse order */ |
| 190 | for (i = 0; i < 7; ++i) |
| 191 | buf[i] = bitrev8(buf[i]); |
| 192 | |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 193 | tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]); |
| 194 | tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 195 | tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]); |
Adrian Bunk | fe20ba7 | 2008-10-18 20:28:41 -0700 | [diff] [blame] | 196 | tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]); |
| 197 | tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]); |
| 198 | tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1; |
| 199 | tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100; |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 200 | |
| 201 | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, " |
| 202 | "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, |
| 203 | tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, |
| 204 | tm->tm_wday); |
| 205 | |
| 206 | return rtc_valid_tm(tm); |
| 207 | } |
| 208 | |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 209 | static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm) |
| 210 | { |
| 211 | struct s35390a *s35390a = i2c_get_clientdata(client); |
| 212 | char buf[3], sts = 0; |
| 213 | int err, i; |
| 214 | |
| 215 | dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d mday=%d, "\ |
| 216 | "mon=%d, year=%d, wday=%d\n", __func__, alm->time.tm_sec, |
| 217 | alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday, |
| 218 | alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday); |
| 219 | |
| 220 | /* disable interrupt */ |
| 221 | err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts)); |
| 222 | if (err < 0) |
| 223 | return err; |
| 224 | |
| 225 | /* clear pending interrupt, if any */ |
| 226 | err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts)); |
| 227 | if (err < 0) |
| 228 | return err; |
| 229 | |
| 230 | if (alm->enabled) |
| 231 | sts = S35390A_INT2_MODE_ALARM; |
| 232 | else |
| 233 | sts = S35390A_INT2_MODE_NOINTR; |
| 234 | |
| 235 | /* This chip expects the bits of each byte to be in reverse order */ |
| 236 | sts = bitrev8(sts); |
| 237 | |
| 238 | /* set interupt mode*/ |
| 239 | err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts)); |
| 240 | if (err < 0) |
| 241 | return err; |
| 242 | |
| 243 | if (alm->time.tm_wday != -1) |
| 244 | buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80; |
| 245 | |
| 246 | buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a, |
| 247 | alm->time.tm_hour) | 0x80; |
| 248 | buf[S35390A_ALRM_BYTE_MINS] = bin2bcd(alm->time.tm_min) | 0x80; |
| 249 | |
| 250 | if (alm->time.tm_hour >= 12) |
| 251 | buf[S35390A_ALRM_BYTE_HOURS] |= 0x40; |
| 252 | |
| 253 | for (i = 0; i < 3; ++i) |
| 254 | buf[i] = bitrev8(buf[i]); |
| 255 | |
| 256 | err = s35390a_set_reg(s35390a, S35390A_CMD_INT2_REG1, buf, |
| 257 | sizeof(buf)); |
| 258 | |
| 259 | return err; |
| 260 | } |
| 261 | |
| 262 | static int s35390a_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alm) |
| 263 | { |
| 264 | struct s35390a *s35390a = i2c_get_clientdata(client); |
| 265 | char buf[3], sts; |
| 266 | int i, err; |
| 267 | |
| 268 | err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts)); |
| 269 | if (err < 0) |
| 270 | return err; |
| 271 | |
| 272 | if (bitrev8(sts) != S35390A_INT2_MODE_ALARM) |
| 273 | return -EINVAL; |
| 274 | |
| 275 | err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf)); |
| 276 | if (err < 0) |
| 277 | return err; |
| 278 | |
| 279 | /* This chip returns the bits of each byte in reverse order */ |
| 280 | for (i = 0; i < 3; ++i) { |
| 281 | buf[i] = bitrev8(buf[i]); |
| 282 | buf[i] &= ~0x80; |
| 283 | } |
| 284 | |
| 285 | alm->time.tm_wday = bcd2bin(buf[S35390A_ALRM_BYTE_WDAY]); |
| 286 | alm->time.tm_hour = s35390a_reg2hr(s35390a, |
| 287 | buf[S35390A_ALRM_BYTE_HOURS]); |
| 288 | alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS]); |
| 289 | |
| 290 | dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n", |
| 291 | __func__, alm->time.tm_min, alm->time.tm_hour, |
| 292 | alm->time.tm_wday); |
| 293 | |
| 294 | return 0; |
| 295 | } |
| 296 | |
| 297 | static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| 298 | { |
| 299 | return s35390a_read_alarm(to_i2c_client(dev), alm); |
| 300 | } |
| 301 | |
| 302 | static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| 303 | { |
| 304 | return s35390a_set_alarm(to_i2c_client(dev), alm); |
| 305 | } |
| 306 | |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 307 | static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 308 | { |
| 309 | return s35390a_get_datetime(to_i2c_client(dev), tm); |
| 310 | } |
| 311 | |
| 312 | static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 313 | { |
| 314 | return s35390a_set_datetime(to_i2c_client(dev), tm); |
| 315 | } |
| 316 | |
| 317 | static const struct rtc_class_ops s35390a_rtc_ops = { |
| 318 | .read_time = s35390a_rtc_read_time, |
| 319 | .set_time = s35390a_rtc_set_time, |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 320 | .set_alarm = s35390a_rtc_set_alarm, |
| 321 | .read_alarm = s35390a_rtc_read_alarm, |
| 322 | |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 323 | }; |
| 324 | |
| 325 | static struct i2c_driver s35390a_driver; |
| 326 | |
Jean Delvare | d2653e9 | 2008-04-29 23:11:39 +0200 | [diff] [blame] | 327 | static int s35390a_probe(struct i2c_client *client, |
| 328 | const struct i2c_device_id *id) |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 329 | { |
| 330 | int err; |
| 331 | unsigned int i; |
| 332 | struct s35390a *s35390a; |
| 333 | struct rtc_time tm; |
| 334 | char buf[1]; |
| 335 | |
| 336 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| 337 | err = -ENODEV; |
| 338 | goto exit; |
| 339 | } |
| 340 | |
| 341 | s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL); |
| 342 | if (!s35390a) { |
| 343 | err = -ENOMEM; |
| 344 | goto exit; |
| 345 | } |
| 346 | |
| 347 | s35390a->client[0] = client; |
| 348 | i2c_set_clientdata(client, s35390a); |
| 349 | |
| 350 | /* This chip uses multiple addresses, use dummy devices for them */ |
| 351 | for (i = 1; i < 8; ++i) { |
| 352 | s35390a->client[i] = i2c_new_dummy(client->adapter, |
Jean Delvare | 60b129d | 2008-05-11 20:37:06 +0200 | [diff] [blame] | 353 | client->addr + i); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 354 | if (!s35390a->client[i]) { |
| 355 | dev_err(&client->dev, "Address %02x unavailable\n", |
| 356 | client->addr + i); |
| 357 | err = -EBUSY; |
| 358 | goto exit_dummy; |
| 359 | } |
| 360 | } |
| 361 | |
| 362 | err = s35390a_reset(s35390a); |
| 363 | if (err < 0) { |
| 364 | dev_err(&client->dev, "error resetting chip\n"); |
| 365 | goto exit_dummy; |
| 366 | } |
| 367 | |
| 368 | err = s35390a_disable_test_mode(s35390a); |
| 369 | if (err < 0) { |
| 370 | dev_err(&client->dev, "error disabling test mode\n"); |
| 371 | goto exit_dummy; |
| 372 | } |
| 373 | |
| 374 | err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); |
| 375 | if (err < 0) { |
| 376 | dev_err(&client->dev, "error checking 12/24 hour mode\n"); |
| 377 | goto exit_dummy; |
| 378 | } |
| 379 | if (buf[0] & S35390A_FLAG_24H) |
| 380 | s35390a->twentyfourhour = 1; |
| 381 | else |
| 382 | s35390a->twentyfourhour = 0; |
| 383 | |
| 384 | if (s35390a_get_datetime(client, &tm) < 0) |
| 385 | dev_warn(&client->dev, "clock needs to be set\n"); |
| 386 | |
Michael Langer | 542dd33 | 2012-10-04 17:14:37 -0700 | [diff] [blame] | 387 | device_set_wakeup_capable(&client->dev, 1); |
| 388 | |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 389 | s35390a->rtc = rtc_device_register(s35390a_driver.driver.name, |
| 390 | &client->dev, &s35390a_rtc_ops, THIS_MODULE); |
| 391 | |
| 392 | if (IS_ERR(s35390a->rtc)) { |
| 393 | err = PTR_ERR(s35390a->rtc); |
| 394 | goto exit_dummy; |
| 395 | } |
| 396 | return 0; |
| 397 | |
| 398 | exit_dummy: |
| 399 | for (i = 1; i < 8; ++i) |
| 400 | if (s35390a->client[i]) |
| 401 | i2c_unregister_device(s35390a->client[i]); |
| 402 | kfree(s35390a); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 403 | |
| 404 | exit: |
| 405 | return err; |
| 406 | } |
| 407 | |
| 408 | static int s35390a_remove(struct i2c_client *client) |
| 409 | { |
| 410 | unsigned int i; |
| 411 | |
| 412 | struct s35390a *s35390a = i2c_get_clientdata(client); |
| 413 | for (i = 1; i < 8; ++i) |
| 414 | if (s35390a->client[i]) |
| 415 | i2c_unregister_device(s35390a->client[i]); |
| 416 | |
| 417 | rtc_device_unregister(s35390a->rtc); |
| 418 | kfree(s35390a); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 419 | |
| 420 | return 0; |
| 421 | } |
| 422 | |
| 423 | static struct i2c_driver s35390a_driver = { |
| 424 | .driver = { |
| 425 | .name = "rtc-s35390a", |
| 426 | }, |
| 427 | .probe = s35390a_probe, |
| 428 | .remove = s35390a_remove, |
Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 429 | .id_table = s35390a_id, |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 430 | }; |
| 431 | |
Axel Lin | 0abc920 | 2012-03-23 15:02:31 -0700 | [diff] [blame] | 432 | module_i2c_driver(s35390a_driver); |
Byron Bradley | c46288b | 2008-03-04 14:28:25 -0800 | [diff] [blame] | 433 | |
| 434 | MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>"); |
| 435 | MODULE_DESCRIPTION("S35390A RTC driver"); |
| 436 | MODULE_LICENSE("GPL"); |