blob: b9b579715ff65e9e65ea2de154273435e16250fc [file] [log] [blame]
Marek543cd842010-03-09 04:04:12 +01001/*
2 * Hardware definitions for Voipac PXA270
3 *
4 * Copyright (C) 2010
5 * Marek Vasut <marek.vasut@gmail.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 */
12
13#include <linux/platform_device.h>
14#include <linux/delay.h>
15#include <linux/irq.h>
16#include <linux/gpio_keys.h>
17#include <linux/input.h>
18#include <linux/gpio.h>
19#include <linux/sysdev.h>
Marek Vasut3d98f882010-03-10 05:24:27 +010020#include <linux/usb/gpio_vbus.h>
Marek543cd842010-03-09 04:04:12 +010021#include <linux/mtd/mtd.h>
22#include <linux/mtd/partitions.h>
23#include <linux/mtd/physmap.h>
Marek Vasutbcc399b2010-05-01 06:54:36 +020024#include <linux/mtd/onenand.h>
Marek Vasut947fb572010-03-10 05:38:54 +010025#include <linux/dm9000.h>
Marek Vasut1a8fb702010-03-26 04:45:54 +010026#include <linux/ucb1400.h>
Marek Vasut052345a2010-04-26 21:46:07 +020027#include <linux/ata_platform.h>
Marek Vasut54e70bf2010-05-21 03:12:43 +020028#include <linux/regulator/max1586.h>
Marek543cd842010-03-09 04:04:12 +010029
30#include <asm/mach-types.h>
31#include <asm/mach/arch.h>
32
33#include <mach/pxa27x.h>
Marek Vasut1a8fb702010-03-26 04:45:54 +010034#include <mach/audio.h>
Marek543cd842010-03-09 04:04:12 +010035#include <mach/vpac270.h>
36#include <mach/mmc.h>
37#include <mach/pxafb.h>
Marek Vasut3d98f882010-03-10 05:24:27 +010038#include <mach/ohci.h>
39#include <mach/pxa27x-udc.h>
40#include <mach/udc.h>
Marek Vasut9b2dbdc2010-05-21 03:12:45 +020041#include <mach/pata_pxa.h>
Marek543cd842010-03-09 04:04:12 +010042
Marek Vasut83a4a102010-03-26 05:38:10 +010043#include <plat/i2c.h>
44
Marek543cd842010-03-09 04:04:12 +010045#include "generic.h"
46#include "devices.h"
47
48/******************************************************************************
49 * Pin configuration
50 ******************************************************************************/
51static unsigned long vpac270_pin_config[] __initdata = {
52 /* MMC */
53 GPIO32_MMC_CLK,
54 GPIO92_MMC_DAT_0,
55 GPIO109_MMC_DAT_1,
56 GPIO110_MMC_DAT_2,
57 GPIO111_MMC_DAT_3,
58 GPIO112_MMC_CMD,
59 GPIO53_GPIO, /* SD detect */
60 GPIO52_GPIO, /* SD r/o switch */
61
62 /* GPIO KEYS */
63 GPIO1_GPIO, /* USER BTN */
64
65 /* LEDs */
66 GPIO15_GPIO, /* orange led */
67
68 /* FFUART */
69 GPIO34_FFUART_RXD,
70 GPIO39_FFUART_TXD,
71 GPIO27_FFUART_RTS,
72 GPIO100_FFUART_CTS,
73 GPIO33_FFUART_DSR,
74 GPIO40_FFUART_DTR,
75 GPIO10_FFUART_DCD,
76 GPIO38_FFUART_RI,
77
78 /* LCD */
79 GPIO58_LCD_LDD_0,
80 GPIO59_LCD_LDD_1,
81 GPIO60_LCD_LDD_2,
82 GPIO61_LCD_LDD_3,
83 GPIO62_LCD_LDD_4,
84 GPIO63_LCD_LDD_5,
85 GPIO64_LCD_LDD_6,
86 GPIO65_LCD_LDD_7,
87 GPIO66_LCD_LDD_8,
88 GPIO67_LCD_LDD_9,
89 GPIO68_LCD_LDD_10,
90 GPIO69_LCD_LDD_11,
91 GPIO70_LCD_LDD_12,
92 GPIO71_LCD_LDD_13,
93 GPIO72_LCD_LDD_14,
94 GPIO73_LCD_LDD_15,
95 GPIO86_LCD_LDD_16,
96 GPIO87_LCD_LDD_17,
97 GPIO74_LCD_FCLK,
98 GPIO75_LCD_LCLK,
99 GPIO76_LCD_PCLK,
100 GPIO77_LCD_BIAS,
Marek Vasutaddff0f2010-03-10 04:16:28 +0100101
102 /* PCMCIA */
103 GPIO48_nPOE,
104 GPIO49_nPWE,
105 GPIO50_nPIOR,
106 GPIO51_nPIOW,
107 GPIO85_nPCE_1,
108 GPIO54_nPCE_2,
109 GPIO55_nPREG,
110 GPIO57_nIOIS16,
111 GPIO56_nPWAIT,
112 GPIO104_PSKTSEL,
113 GPIO84_GPIO, /* PCMCIA CD */
114 GPIO35_GPIO, /* PCMCIA RDY */
115 GPIO107_GPIO, /* PCMCIA PPEN */
116 GPIO11_GPIO, /* PCMCIA RESET */
117 GPIO17_GPIO, /* CF CD */
118 GPIO12_GPIO, /* CF RDY */
119 GPIO16_GPIO, /* CF RESET */
120
Marek Vasut3d98f882010-03-10 05:24:27 +0100121 /* UHC */
122 GPIO88_USBH1_PWR,
123 GPIO89_USBH1_PEN,
124 GPIO119_USBH2_PWR,
125 GPIO120_USBH2_PEN,
126
127 /* UDC */
128 GPIO41_GPIO,
Marek Vasut947fb572010-03-10 05:38:54 +0100129
130 /* Ethernet */
131 GPIO114_GPIO, /* IRQ */
Marek Vasut1a8fb702010-03-26 04:45:54 +0100132
133 /* AC97 */
134 GPIO28_AC97_BITCLK,
135 GPIO29_AC97_SDATA_IN_0,
136 GPIO30_AC97_SDATA_OUT,
137 GPIO31_AC97_SYNC,
138 GPIO95_AC97_nRESET,
139 GPIO98_AC97_SYSCLK,
140 GPIO113_GPIO, /* TS IRQ */
Marek Vasut83a4a102010-03-26 05:38:10 +0100141
142 /* I2C */
143 GPIO117_I2C_SCL,
144 GPIO118_I2C_SDA,
Marek Vasut052345a2010-04-26 21:46:07 +0200145
146 /* IDE */
147 GPIO36_GPIO, /* IDE IRQ */
148 GPIO80_DREQ_1,
Marek543cd842010-03-09 04:04:12 +0100149};
150
151/******************************************************************************
152 * NOR Flash
153 ******************************************************************************/
154#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
Marek Vasutbcc399b2010-05-01 06:54:36 +0200155static struct mtd_partition vpac270_nor_partitions[] = {
Marek543cd842010-03-09 04:04:12 +0100156 {
157 .name = "Flash",
158 .offset = 0x00000000,
159 .size = MTDPART_SIZ_FULL,
160 }
161};
162
163static struct physmap_flash_data vpac270_flash_data[] = {
164 {
165 .width = 2, /* bankwidth in bytes */
Marek Vasutbcc399b2010-05-01 06:54:36 +0200166 .parts = vpac270_nor_partitions,
167 .nr_parts = ARRAY_SIZE(vpac270_nor_partitions)
Marek543cd842010-03-09 04:04:12 +0100168 }
169};
170
171static struct resource vpac270_flash_resource = {
172 .start = PXA_CS0_PHYS,
173 .end = PXA_CS0_PHYS + SZ_64M - 1,
174 .flags = IORESOURCE_MEM,
175};
176
177static struct platform_device vpac270_flash = {
178 .name = "physmap-flash",
179 .id = 0,
180 .resource = &vpac270_flash_resource,
181 .num_resources = 1,
182 .dev = {
183 .platform_data = vpac270_flash_data,
184 },
185};
186static void __init vpac270_nor_init(void)
187{
188 platform_device_register(&vpac270_flash);
189}
190#else
191static inline void vpac270_nor_init(void) {}
192#endif
193
194/******************************************************************************
Marek Vasutbcc399b2010-05-01 06:54:36 +0200195 * OneNAND Flash
196 ******************************************************************************/
197#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
198static struct mtd_partition vpac270_onenand_partitions[] = {
199 {
200 .name = "Flash",
201 .offset = 0x00000000,
202 .size = MTDPART_SIZ_FULL,
203 }
204};
205
206static struct onenand_platform_data vpac270_onenand_info = {
207 .parts = vpac270_onenand_partitions,
208 .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions),
209};
210
211static struct resource vpac270_onenand_resources[] = {
212 [0] = {
213 .start = PXA_CS0_PHYS,
214 .end = PXA_CS0_PHYS + SZ_1M,
215 .flags = IORESOURCE_MEM,
216 },
217};
218
219static struct platform_device vpac270_onenand = {
220 .name = "onenand-flash",
221 .id = -1,
222 .resource = vpac270_onenand_resources,
223 .num_resources = ARRAY_SIZE(vpac270_onenand_resources),
224 .dev = {
225 .platform_data = &vpac270_onenand_info,
226 },
227};
228
229static void __init vpac270_onenand_init(void)
230{
231 platform_device_register(&vpac270_onenand);
232}
233#else
234static void __init vpac270_onenand_init(void) {}
235#endif
236
237/******************************************************************************
Marek543cd842010-03-09 04:04:12 +0100238 * SD/MMC card controller
239 ******************************************************************************/
240#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
241static struct pxamci_platform_data vpac270_mci_platform_data = {
242 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
Marek Vasut979a281c2010-08-09 03:55:09 +0200243 .gpio_power = -1,
Marek543cd842010-03-09 04:04:12 +0100244 .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
245 .gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
Eric Miaof97cab22010-04-14 07:00:42 +0800246 .detect_delay_ms = 200,
Marek543cd842010-03-09 04:04:12 +0100247};
248
249static void __init vpac270_mmc_init(void)
250{
251 pxa_set_mci_info(&vpac270_mci_platform_data);
252}
253#else
254static inline void vpac270_mmc_init(void) {}
255#endif
256
257/******************************************************************************
258 * GPIO keys
259 ******************************************************************************/
260#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
261static struct gpio_keys_button vpac270_pxa_buttons[] = {
262 {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
263};
264
265static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
266 .buttons = vpac270_pxa_buttons,
267 .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons),
268};
269
270static struct platform_device vpac270_pxa_keys = {
271 .name = "gpio-keys",
272 .id = -1,
273 .dev = {
274 .platform_data = &vpac270_pxa_keys_data,
275 },
276};
277
278static void __init vpac270_keys_init(void)
279{
280 platform_device_register(&vpac270_pxa_keys);
281}
282#else
283static inline void vpac270_keys_init(void) {}
284#endif
285
286/******************************************************************************
287 * LED
288 ******************************************************************************/
289#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
290struct gpio_led vpac270_gpio_leds[] = {
291{
292 .name = "vpac270:orange:user",
293 .default_trigger = "none",
294 .gpio = GPIO15_VPAC270_LED_ORANGE,
295 .active_low = 1,
296}
297};
298
299static struct gpio_led_platform_data vpac270_gpio_led_info = {
300 .leds = vpac270_gpio_leds,
301 .num_leds = ARRAY_SIZE(vpac270_gpio_leds),
302};
303
304static struct platform_device vpac270_leds = {
305 .name = "leds-gpio",
306 .id = -1,
307 .dev = {
308 .platform_data = &vpac270_gpio_led_info,
309 }
310};
311
312static void __init vpac270_leds_init(void)
313{
314 platform_device_register(&vpac270_leds);
315}
316#else
317static inline void vpac270_leds_init(void) {}
318#endif
319
320/******************************************************************************
Marek Vasut3d98f882010-03-10 05:24:27 +0100321 * USB Host
322 ******************************************************************************/
323#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
324static int vpac270_ohci_init(struct device *dev)
325{
326 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
327 return 0;
328}
329
330static struct pxaohci_platform_data vpac270_ohci_info = {
331 .port_mode = PMM_PERPORT_MODE,
332 .flags = ENABLE_PORT1 | ENABLE_PORT2 |
333 POWER_CONTROL_LOW | POWER_SENSE_LOW,
334 .init = vpac270_ohci_init,
335};
336
337static void __init vpac270_uhc_init(void)
338{
339 pxa_set_ohci_info(&vpac270_ohci_info);
340}
341#else
342static inline void vpac270_uhc_init(void) {}
343#endif
344
345/******************************************************************************
346 * USB Gadget
347 ******************************************************************************/
348#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
349static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
350 .gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
351 .gpio_pullup = -1,
352};
353
354static struct platform_device vpac270_gpio_vbus = {
355 .name = "gpio-vbus",
356 .id = -1,
357 .dev = {
358 .platform_data = &vpac270_gpio_vbus_info,
359 },
360};
361
362static void vpac270_udc_command(int cmd)
363{
364 if (cmd == PXA2XX_UDC_CMD_CONNECT)
Marek Vasutfb25cb32010-05-02 06:10:25 +0200365 UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
Marek Vasut3d98f882010-03-10 05:24:27 +0100366 else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
Marek Vasutfb25cb32010-05-02 06:10:25 +0200367 UP2OCR = UP2OCR_HXOE;
Marek Vasut3d98f882010-03-10 05:24:27 +0100368}
369
370static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
371 .udc_command = vpac270_udc_command,
372 .gpio_pullup = -1,
373};
374
375static void __init vpac270_udc_init(void)
376{
377 pxa_set_udc_info(&vpac270_udc_info);
378 platform_device_register(&vpac270_gpio_vbus);
379}
380#else
381static inline void vpac270_udc_init(void) {}
382#endif
383
384/******************************************************************************
Marek Vasut947fb572010-03-10 05:38:54 +0100385 * Ethernet
386 ******************************************************************************/
387#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
388static struct resource vpac270_dm9000_resources[] = {
389 [0] = {
390 .start = PXA_CS2_PHYS + 0x300,
391 .end = PXA_CS2_PHYS + 0x303,
392 .flags = IORESOURCE_MEM,
393 },
394 [1] = {
395 .start = PXA_CS2_PHYS + 0x304,
396 .end = PXA_CS2_PHYS + 0x343,
397 .flags = IORESOURCE_MEM,
398 },
399 [2] = {
400 .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
401 .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
402 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
403 },
404};
405
406static struct dm9000_plat_data vpac270_dm9000_platdata = {
407 .flags = DM9000_PLATF_32BITONLY,
408};
409
410static struct platform_device vpac270_dm9000_device = {
411 .name = "dm9000",
412 .id = -1,
413 .num_resources = ARRAY_SIZE(vpac270_dm9000_resources),
414 .resource = vpac270_dm9000_resources,
415 .dev = {
416 .platform_data = &vpac270_dm9000_platdata,
417 }
418};
419
420static void __init vpac270_eth_init(void)
421{
422 platform_device_register(&vpac270_dm9000_device);
423}
424#else
425static inline void vpac270_eth_init(void) {}
426#endif
427
428/******************************************************************************
Marek Vasut1a8fb702010-03-26 04:45:54 +0100429 * Audio and Touchscreen
430 ******************************************************************************/
431#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
432 defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
433static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
434 .reset_gpio = 95,
435};
436
437static struct ucb1400_pdata vpac270_ucb1400_pdata = {
Marek Vasutaeec1342010-04-26 23:23:48 +0200438 .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
Marek Vasut1a8fb702010-03-26 04:45:54 +0100439};
440
441static struct platform_device vpac270_ucb1400_device = {
442 .name = "ucb1400_core",
443 .id = -1,
444 .dev = {
445 .platform_data = &vpac270_ucb1400_pdata,
446 },
447};
448
449static void __init vpac270_ts_init(void)
450{
451 pxa_set_ac97_info(&vpac270_ac97_pdata);
452 platform_device_register(&vpac270_ucb1400_device);
453}
454#else
455static inline void vpac270_ts_init(void) {}
456#endif
457
458/******************************************************************************
Marek Vasut83a4a102010-03-26 05:38:10 +0100459 * RTC
460 ******************************************************************************/
461#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
462static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
463 {
464 I2C_BOARD_INFO("ds1339", 0x68),
465 },
466};
467
468static void __init vpac270_rtc_init(void)
469{
Marek Vasut83a4a102010-03-26 05:38:10 +0100470 i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
471}
472#else
473static inline void vpac270_rtc_init(void) {}
474#endif
475
476/******************************************************************************
Marek543cd842010-03-09 04:04:12 +0100477 * Framebuffer
478 ******************************************************************************/
479#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
480static struct pxafb_mode_info vpac270_lcd_modes[] = {
481{
482 .pixclock = 57692,
483 .xres = 640,
484 .yres = 480,
485 .bpp = 32,
486 .depth = 18,
487
488 .left_margin = 144,
489 .right_margin = 32,
490 .upper_margin = 13,
491 .lower_margin = 30,
492
493 .hsync_len = 32,
494 .vsync_len = 2,
495
496 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
Marek Vasut97dbc512010-05-21 03:12:46 +0200497}, { /* CRT 640x480 */
498 .pixclock = 35000,
499 .xres = 640,
500 .yres = 480,
501 .bpp = 16,
502 .depth = 16,
503
504 .left_margin = 96,
505 .right_margin = 48,
506 .upper_margin = 33,
507 .lower_margin = 10,
508
509 .hsync_len = 48,
510 .vsync_len = 1,
511
512 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
513}, { /* CRT 800x600 H=30kHz V=48HZ */
514 .pixclock = 25000,
515 .xres = 800,
516 .yres = 600,
517 .bpp = 16,
518 .depth = 16,
519
520 .left_margin = 50,
521 .right_margin = 1,
522 .upper_margin = 21,
523 .lower_margin = 12,
524
525 .hsync_len = 8,
526 .vsync_len = 1,
527
528 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
529}, { /* CRT 1024x768 H=40kHz V=50Hz */
530 .pixclock = 15000,
531 .xres = 1024,
532 .yres = 768,
533 .bpp = 16,
534 .depth = 16,
535
536 .left_margin = 220,
537 .right_margin = 8,
538 .upper_margin = 33,
539 .lower_margin = 2,
540
541 .hsync_len = 48,
542 .vsync_len = 1,
543
544 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
545}
Marek543cd842010-03-09 04:04:12 +0100546};
547
548static struct pxafb_mach_info vpac270_lcd_screen = {
549 .modes = vpac270_lcd_modes,
550 .num_modes = ARRAY_SIZE(vpac270_lcd_modes),
551 .lcd_conn = LCD_COLOR_TFT_18BPP,
552};
553
554static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
555{
556 gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
557}
558
559static void __init vpac270_lcd_init(void)
560{
561 int ret;
562
563 ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
564 if (ret) {
565 pr_err("Requesting BKL-ON GPIO failed!\n");
566 goto err;
567 }
568
569 ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
570 if (ret) {
571 pr_err("Setting BKL-ON GPIO direction failed!\n");
572 goto err2;
573 }
574
575 vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
576 set_pxa_fb_info(&vpac270_lcd_screen);
577 return;
578
579err2:
580 gpio_free(GPIO81_VPAC270_BKL_ON);
581err:
582 return;
583}
584#else
585static inline void vpac270_lcd_init(void) {}
586#endif
587
588/******************************************************************************
Marek Vasut052345a2010-04-26 21:46:07 +0200589 * PATA IDE
590 ******************************************************************************/
Marek Vasut9b2dbdc2010-05-21 03:12:45 +0200591#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
592static struct pata_pxa_pdata vpac270_pata_pdata = {
593 .reg_shift = 1,
594 .dma_dreq = 1,
Marek Vasut052345a2010-04-26 21:46:07 +0200595 .irq_flags = IRQF_TRIGGER_RISING,
596};
597
598static struct resource vpac270_ide_resources[] = {
599 [0] = { /* I/O Base address */
600 .start = PXA_CS3_PHYS + 0x120,
601 .end = PXA_CS3_PHYS + 0x13f,
602 .flags = IORESOURCE_MEM
603 },
604 [1] = { /* CTL Base address */
605 .start = PXA_CS3_PHYS + 0x15c,
606 .end = PXA_CS3_PHYS + 0x15f,
607 .flags = IORESOURCE_MEM
608 },
Marek Vasut9b2dbdc2010-05-21 03:12:45 +0200609 [2] = { /* DMA Base address */
610 .start = PXA_CS3_PHYS + 0x20,
611 .end = PXA_CS3_PHYS + 0x2f,
612 .flags = IORESOURCE_DMA
613 },
614 [3] = { /* IDE IRQ pin */
Marek Vasut052345a2010-04-26 21:46:07 +0200615 .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
616 .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
617 .flags = IORESOURCE_IRQ
618 }
619};
620
621static struct platform_device vpac270_ide_device = {
Marek Vasut9b2dbdc2010-05-21 03:12:45 +0200622 .name = "pata_pxa",
Marek Vasut052345a2010-04-26 21:46:07 +0200623 .num_resources = ARRAY_SIZE(vpac270_ide_resources),
624 .resource = vpac270_ide_resources,
625 .dev = {
626 .platform_data = &vpac270_pata_pdata,
Marek Vasut9b2dbdc2010-05-21 03:12:45 +0200627 .coherent_dma_mask = 0xffffffff,
Marek Vasut052345a2010-04-26 21:46:07 +0200628 }
629};
630
631static void __init vpac270_ide_init(void)
632{
633 platform_device_register(&vpac270_ide_device);
634}
635#else
636static inline void vpac270_ide_init(void) {}
637#endif
638
639/******************************************************************************
Marek Vasut54e70bf2010-05-21 03:12:43 +0200640 * Core power regulator
641 ******************************************************************************/
642#if defined(CONFIG_REGULATOR_MAX1586) || \
643 defined(CONFIG_REGULATOR_MAX1586_MODULE)
644static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
645 {
646 .supply = "vcc_core",
647 }
648};
649
650static struct regulator_init_data vpac270_max1587a_v3_info = {
651 .constraints = {
652 .name = "vcc_core range",
653 .min_uV = 900000,
654 .max_uV = 1705000,
655 .always_on = 1,
656 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
657 },
658 .consumer_supplies = vpac270_max1587a_consumers,
659 .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers),
660};
661
662static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
663 {
664 .name = "vcc_core",
665 .id = MAX1586_V3,
666 .platform_data = &vpac270_max1587a_v3_info,
667 }
668};
669
670static struct max1586_platform_data vpac270_max1587a_info = {
671 .subdevs = vpac270_max1587a_subdevs,
672 .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
673 .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
674};
675
676static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
677 {
678 I2C_BOARD_INFO("max1586", 0x14),
679 .platform_data = &vpac270_max1587a_info,
680 },
681};
682
683static void __init vpac270_pmic_init(void)
684{
685 i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
686}
687#else
688static inline void vpac270_pmic_init(void) {}
689#endif
690
691
692/******************************************************************************
Marek543cd842010-03-09 04:04:12 +0100693 * Machine init
694 ******************************************************************************/
695static void __init vpac270_init(void)
696{
697 pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
698
699 pxa_set_ffuart_info(NULL);
700 pxa_set_btuart_info(NULL);
701 pxa_set_stuart_info(NULL);
Marek Vasut54e70bf2010-05-21 03:12:43 +0200702 pxa_set_i2c_info(NULL);
703 pxa27x_set_i2c_power_info(NULL);
Marek543cd842010-03-09 04:04:12 +0100704
Marek Vasut54e70bf2010-05-21 03:12:43 +0200705 vpac270_pmic_init();
Marek543cd842010-03-09 04:04:12 +0100706 vpac270_lcd_init();
707 vpac270_mmc_init();
708 vpac270_nor_init();
Marek Vasutbcc399b2010-05-01 06:54:36 +0200709 vpac270_onenand_init();
Marek543cd842010-03-09 04:04:12 +0100710 vpac270_leds_init();
711 vpac270_keys_init();
Marek Vasut3d98f882010-03-10 05:24:27 +0100712 vpac270_uhc_init();
713 vpac270_udc_init();
Marek Vasut947fb572010-03-10 05:38:54 +0100714 vpac270_eth_init();
Marek Vasut1a8fb702010-03-26 04:45:54 +0100715 vpac270_ts_init();
Marek Vasut83a4a102010-03-26 05:38:10 +0100716 vpac270_rtc_init();
Marek Vasut052345a2010-04-26 21:46:07 +0200717 vpac270_ide_init();
Marek543cd842010-03-09 04:04:12 +0100718}
719
720MACHINE_START(VPAC270, "Voipac PXA270")
Marek543cd842010-03-09 04:04:12 +0100721 .boot_params = 0xa0000100,
Marek Vasut851982c2010-10-11 02:20:19 +0200722 .map_io = pxa27x_map_io,
Marek543cd842010-03-09 04:04:12 +0100723 .init_irq = pxa27x_init_irq,
724 .timer = &pxa_timer,
725 .init_machine = vpac270_init
726MACHINE_END