blob: 66797e9c5010d35cd5c21563a99faec79cd8a175 [file] [log] [blame]
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +01001/*
2 * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
3 * Radio Control command/event transport
4 *
5 * Copyright (C) 2005-2006 Intel Corporation
6 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License version
10 * 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
20 * 02110-1301, USA.
21 *
22 *
23 * Initialize the Radio Control interface Driver.
24 *
25 * For each device probed, creates an 'struct hwarc' which contains
26 * just the representation of the UWB Radio Controller, and the logic
27 * for reading notifications and passing them to the UWB Core.
28 *
29 * So we initialize all of those, register the UWB Radio Controller
30 * and setup the notification/event handle to pipe the notifications
31 * to the UWB management Daemon.
32 *
33 * Command and event filtering.
34 *
35 * This is the driver for the Radio Control Interface described in WUSB
36 * 1.0. The core UWB module assumes that all drivers are compliant to the
37 * WHCI 0.95 specification. We thus create a filter that parses all
38 * incoming messages from the (WUSB 1.0) device and manipulate them to
39 * conform to the WHCI 0.95 specification. Similarly, outgoing messages
40 * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
41 * that the device expects. Only a few messages are affected:
42 * Affected events:
43 * UWB_RC_EVT_BEACON
44 * UWB_RC_EVT_BP_SLOT_CHANGE
45 * UWB_RC_EVT_DRP_AVAIL
46 * UWB_RC_EVT_DRP
47 * Affected commands:
48 * UWB_RC_CMD_SCAN
49 * UWB_RC_CMD_SET_DRP_IE
50 *
51 *
52 *
53 */
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +010054#include <linux/init.h>
55#include <linux/module.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090056#include <linux/slab.h>
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +010057#include <linux/usb.h>
58#include <linux/usb/wusb.h>
59#include <linux/usb/wusb-wa.h>
60#include <linux/uwb.h>
David Vrabelbce83692008-12-22 18:22:50 +000061
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +010062#include "uwb-internal.h"
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +010063
Anderson Lizardoe477a492008-09-17 16:34:35 +010064/* The device uses commands and events from the WHCI specification, although
65 * reporting itself as WUSB compliant. */
66#define WUSB_QUIRK_WHCI_CMD_EVT 0x01
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +010067
68/**
69 * Descriptor for an instance of the UWB Radio Control Driver that
70 * attaches to the RCI interface of the Host Wired Adapter.
71 *
72 * Unless there is a lock specific to the 'data members', all access
73 * is protected by uwb_rc->mutex.
74 *
75 * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
76 * @rd_buffer. Note there is no locking because it is perfectly (heh!)
77 * serialized--probe() submits an URB, callback is called, processes
78 * the data (synchronously), submits another URB, and so on. There is
79 * no concurrent access to the buffer.
80 */
81struct hwarc {
82 struct usb_device *usb_dev;
83 struct usb_interface *usb_iface;
84 struct uwb_rc *uwb_rc; /* UWB host controller */
85 struct urb *neep_urb; /* Notification endpoint handling */
86 struct edc neep_edc;
87 void *rd_buffer; /* NEEP read buffer */
88};
89
90
91/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
92struct uwb_rc_evt_beacon_WUSB_0100 {
93 struct uwb_rceb rceb;
94 u8 bChannelNumber;
95 __le16 wBPSTOffset;
96 u8 bLQI;
97 u8 bRSSI;
98 __le16 wBeaconInfoLength;
99 u8 BeaconInfo[];
100} __attribute__((packed));
101
102/**
103 * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
104 *
105 * @header: the incoming event
106 * @buf_size: size of buffer containing incoming event
107 * @new_size: size of event after filtering completed
108 *
109 * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
110 * the time we receive the beacon from WUSB so we just set it to
111 * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
112 * The solution below allocates memory upon receipt of every beacon from a
113 * WUSB device. This will deteriorate performance. What is the right way to
114 * do this?
115 */
116static
117int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
118 struct uwb_rceb **header,
119 const size_t buf_size,
120 size_t *new_size)
121{
122 struct uwb_rc_evt_beacon_WUSB_0100 *be;
123 struct uwb_rc_evt_beacon *newbe;
124 size_t bytes_left, ielength;
125 struct device *dev = &rc->uwb_dev.dev;
126
127 be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
128 bytes_left = buf_size;
129 if (bytes_left < sizeof(*be)) {
130 dev_err(dev, "Beacon Received Notification: Not enough data "
131 "to decode for filtering (%zu vs %zu bytes needed)\n",
132 bytes_left, sizeof(*be));
133 return -EINVAL;
134 }
135 bytes_left -= sizeof(*be);
136 ielength = le16_to_cpu(be->wBeaconInfoLength);
137 if (bytes_left < ielength) {
138 dev_err(dev, "Beacon Received Notification: Not enough data "
139 "to decode IEs (%zu vs %zu bytes needed)\n",
140 bytes_left, ielength);
141 return -EINVAL;
142 }
143 newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
144 if (newbe == NULL)
145 return -ENOMEM;
146 newbe->rceb = be->rceb;
147 newbe->bChannelNumber = be->bChannelNumber;
148 newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
149 newbe->wBPSTOffset = be->wBPSTOffset;
150 newbe->bLQI = be->bLQI;
151 newbe->bRSSI = be->bRSSI;
152 newbe->wBeaconInfoLength = be->wBeaconInfoLength;
153 memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
154 *header = &newbe->rceb;
155 *new_size = sizeof(*newbe) + ielength;
156 return 1; /* calling function will free memory */
157}
158
159
160/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
161struct uwb_rc_evt_drp_avail_WUSB_0100 {
162 struct uwb_rceb rceb;
163 __le16 wIELength;
164 u8 IEData[];
165} __attribute__((packed));
166
167/**
168 * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
169 *
170 * @header: the incoming event
171 * @buf_size: size of buffer containing incoming event
172 * @new_size: size of event after filtering completed
173 */
174static
175int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
176 struct uwb_rceb **header,
177 const size_t buf_size,
178 size_t *new_size)
179{
180 struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
181 struct uwb_rc_evt_drp_avail *newda;
182 struct uwb_ie_hdr *ie_hdr;
183 size_t bytes_left, ielength;
184 struct device *dev = &rc->uwb_dev.dev;
185
186
187 da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
188 bytes_left = buf_size;
189 if (bytes_left < sizeof(*da)) {
190 dev_err(dev, "Not enough data to decode DRP Avail "
191 "Notification for filtering. Expected %zu, "
192 "received %zu.\n", (size_t)sizeof(*da), bytes_left);
193 return -EINVAL;
194 }
195 bytes_left -= sizeof(*da);
196 ielength = le16_to_cpu(da->wIELength);
197 if (bytes_left < ielength) {
198 dev_err(dev, "DRP Avail Notification filter: IE length "
199 "[%zu bytes] does not match actual length "
200 "[%zu bytes].\n", ielength, bytes_left);
201 return -EINVAL;
202 }
203 if (ielength < sizeof(*ie_hdr)) {
204 dev_err(dev, "DRP Avail Notification filter: Not enough "
205 "data to decode IE [%zu bytes, %zu needed]\n",
206 ielength, sizeof(*ie_hdr));
207 return -EINVAL;
208 }
209 ie_hdr = (void *) da->IEData;
210 if (ie_hdr->length > 32) {
211 dev_err(dev, "DRP Availability Change event has unexpected "
212 "length for filtering. Expected < 32 bytes, "
213 "got %zu bytes.\n", (size_t)ie_hdr->length);
214 return -EINVAL;
215 }
216 newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
217 if (newda == NULL)
218 return -ENOMEM;
219 newda->rceb = da->rceb;
220 memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
221 *header = &newda->rceb;
222 *new_size = sizeof(*newda);
223 return 1; /* calling function will free memory */
224}
225
226
227/* DRP notification (WUSB 1.0 [8.6.3.9]) */
228struct uwb_rc_evt_drp_WUSB_0100 {
229 struct uwb_rceb rceb;
230 struct uwb_dev_addr wSrcAddr;
231 u8 bExplicit;
232 __le16 wIELength;
233 u8 IEData[];
234} __attribute__((packed));
235
236/**
237 * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
238 *
239 * @header: the incoming event
240 * @buf_size: size of buffer containing incoming event
241 * @new_size: size of event after filtering completed
242 *
243 * It is hard to manage DRP reservations without having a Reason code.
244 * Unfortunately there is none in the WUSB spec. We just set the default to
245 * DRP IE RECEIVED.
246 * We do not currently use the bBeaconSlotNumber value, so we set this to
247 * zero for now.
248 */
249static
250int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
251 struct uwb_rceb **header,
252 const size_t buf_size,
253 size_t *new_size)
254{
255 struct uwb_rc_evt_drp_WUSB_0100 *drpev;
256 struct uwb_rc_evt_drp *newdrpev;
257 size_t bytes_left, ielength;
258 struct device *dev = &rc->uwb_dev.dev;
259
260 drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
261 bytes_left = buf_size;
262 if (bytes_left < sizeof(*drpev)) {
263 dev_err(dev, "Not enough data to decode DRP Notification "
264 "for filtering. Expected %zu, received %zu.\n",
265 (size_t)sizeof(*drpev), bytes_left);
266 return -EINVAL;
267 }
268 ielength = le16_to_cpu(drpev->wIELength);
269 bytes_left -= sizeof(*drpev);
270 if (bytes_left < ielength) {
271 dev_err(dev, "DRP Notification filter: header length [%zu "
272 "bytes] does not match actual length [%zu "
273 "bytes].\n", ielength, bytes_left);
274 return -EINVAL;
275 }
276 newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
277 if (newdrpev == NULL)
278 return -ENOMEM;
279 newdrpev->rceb = drpev->rceb;
280 newdrpev->src_addr = drpev->wSrcAddr;
281 newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
282 newdrpev->beacon_slot_number = 0;
283 newdrpev->ie_length = drpev->wIELength;
284 memcpy(newdrpev->ie_data, drpev->IEData, ielength);
285 *header = &newdrpev->rceb;
286 *new_size = sizeof(*newdrpev) + ielength;
287 return 1; /* calling function will free memory */
288}
289
290
291/* Scan Command (WUSB 1.0 [8.6.2.5]) */
292struct uwb_rc_cmd_scan_WUSB_0100 {
293 struct uwb_rccb rccb;
294 u8 bChannelNumber;
295 u8 bScanState;
296} __attribute__((packed));
297
298/**
299 * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
300 *
301 * @header: command sent to device (compliant to WHCI 0.95)
302 * @size: size of command sent to device
303 *
304 * We only reduce the size by two bytes because the WUSB 1.0 scan command
305 * does not have the last field (wStarttime). Also, make sure we don't send
306 * the device an unexpected scan type.
307 */
308static
309int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
310 struct uwb_rccb **header,
311 size_t *size)
312{
313 struct uwb_rc_cmd_scan *sc;
314
315 sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
316
317 if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
318 sc->bScanState = UWB_SCAN_ONLY;
319 /* Don't send the last two bytes. */
320 *size -= 2;
321 return 0;
322}
323
324
325/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
326struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
327 struct uwb_rccb rccb;
328 u8 bExplicit;
329 __le16 wIELength;
330 struct uwb_ie_drp IEData[];
331} __attribute__((packed));
332
333/**
334 * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
335 *
336 * @header: command sent to device (compliant to WHCI 0.95)
337 * @size: size of command sent to device
338 *
339 * WUSB has an extra bExplicit field - we assume always explicit
340 * negotiation so this field is set. The command expected by the device is
341 * thus larger than the one prepared by the driver so we need to
342 * reallocate memory to accommodate this.
343 * We trust the driver to send us the correct data so no checking is done
344 * on incoming data - evn though it is variable length.
345 */
346static
347int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
348 struct uwb_rccb **header,
349 size_t *size)
350{
351 struct uwb_rc_cmd_set_drp_ie *orgcmd;
352 struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
353 size_t ielength;
354
355 orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
356 ielength = le16_to_cpu(orgcmd->wIELength);
357 cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
358 if (cmd == NULL)
359 return -ENOMEM;
360 cmd->rccb = orgcmd->rccb;
361 cmd->bExplicit = 0;
362 cmd->wIELength = orgcmd->wIELength;
363 memcpy(cmd->IEData, orgcmd->IEData, ielength);
364 *header = &cmd->rccb;
365 *size = sizeof(*cmd) + ielength;
366 return 1; /* calling function will free memory */
367}
368
369
370/**
371 * Filter data from WHCI driver to WUSB device
372 *
373 * @header: WHCI 0.95 compliant command from driver
374 * @size: length of command
375 *
376 * The routine managing commands to the device (uwb_rc_cmd()) will call the
377 * filtering function pointer (if it exists) before it passes any data to
378 * the device. At this time the command has been formatted according to
379 * WHCI 0.95 and is ready to be sent to the device.
380 *
381 * The filter function will be provided with the current command and its
382 * length. The function will manipulate the command if necessary and
383 * potentially reallocate memory for a command that needed more memory that
384 * the given command. If new memory was created the function will return 1
385 * to indicate to the calling function that the memory need to be freed
386 * when not needed any more. The size will contain the new length of the
387 * command.
388 * If memory has not been allocated we rely on the original mechanisms to
389 * free the memory of the command - even when we reduce the value of size.
390 */
391static
392int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
393 size_t *size)
394{
395 int result;
396 struct uwb_rccb *rccb = *header;
397 int cmd = le16_to_cpu(rccb->wCommand);
398 switch (cmd) {
399 case UWB_RC_CMD_SCAN:
400 result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
401 break;
402 case UWB_RC_CMD_SET_DRP_IE:
403 result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
404 break;
405 default:
406 result = -ENOANO;
407 break;
408 }
409 return result;
410}
411
412
413/**
414 * Filter data from WHCI driver to WUSB device
415 *
416 * @header: WHCI 0.95 compliant command from driver
417 * @size: length of command
418 *
419 * Filter commands based on which protocol the device supports. The WUSB
420 * errata should be the same as WHCI 0.95 so we do not filter that here -
421 * only WUSB 1.0.
422 */
423static
424int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
425 size_t *size)
426{
427 int result = -ENOANO;
428 if (rc->version == 0x0100)
429 result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
430 return result;
431}
432
433
434/**
435 * Compute return value as sum of incoming value and value at given offset
436 *
437 * @rceb: event for which we compute the size, it contains a variable
438 * length field.
439 * @core_size: size of the "non variable" part of the event
440 * @offset: place in event where the length of the variable part is stored
441 * @buf_size: total length of buffer in which event arrived - we need to make
442 * sure we read the offset in memory that is still part of the event
443 */
444static
445ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
446 size_t core_size, size_t offset,
447 const size_t buf_size)
448{
449 ssize_t size = -ENOSPC;
450 const void *ptr = rceb;
451 size_t type_size = sizeof(__le16);
452 struct device *dev = &rc->uwb_dev.dev;
453
454 if (offset + type_size >= buf_size) {
455 dev_err(dev, "Not enough data to read extra size of event "
456 "0x%02x/%04x/%02x, only got %zu bytes.\n",
457 rceb->bEventType, le16_to_cpu(rceb->wEvent),
458 rceb->bEventContext, buf_size);
459 goto out;
460 }
461 ptr += offset;
462 size = core_size + le16_to_cpu(*(__le16 *)ptr);
463out:
464 return size;
465}
466
467
468/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
469struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
470 struct uwb_rceb rceb;
471 u8 bSlotNumber;
472} __attribute__((packed));
473
474
475/**
476 * Filter data from WUSB device to WHCI driver
477 *
478 * @header: incoming event
479 * @buf_size: size of buffer in which event arrived
480 * @_event_size: actual size of event in the buffer
481 * @new_size: size of event after filtered
482 *
483 * We don't know how the buffer is constructed - there may be more than one
484 * event in it so buffer length does not determine event length. We first
485 * determine the expected size of the incoming event. This value is passed
486 * back only if the actual filtering succeeded (so we know the computed
487 * expected size is correct). This value will be zero if
488 * the event did not need any filtering.
489 *
490 * WHCI interprets the BP Slot Change event's data differently than
491 * WUSB. The event sizes are exactly the same. The data field
492 * indicates the new beacon slot in which a RC is transmitting its
493 * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
494 * 17.16 (Table 117)). We thus know that the WUSB value will not set
495 * the bit bNoSlot, so we don't really do anything (placeholder).
496 */
497static
498int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
499 const size_t buf_size, size_t *_real_size,
500 size_t *_new_size)
501{
502 int result = -ENOANO;
503 struct uwb_rceb *rceb = *header;
504 int event = le16_to_cpu(rceb->wEvent);
Roel Kluin94d72172009-05-12 13:47:21 -0700505 ssize_t event_size;
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100506 size_t core_size, offset;
507
508 if (rceb->bEventType != UWB_RC_CET_GENERAL)
509 goto out;
510 switch (event) {
511 case UWB_RC_EVT_BEACON:
512 core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
513 offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
514 wBeaconInfoLength);
515 event_size = hwarc_get_event_size(rc, rceb, core_size,
516 offset, buf_size);
517 if (event_size < 0)
518 goto out;
519 *_real_size = event_size;
520 result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
521 buf_size, _new_size);
522 break;
523 case UWB_RC_EVT_BP_SLOT_CHANGE:
524 *_new_size = *_real_size =
525 sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
526 result = 0;
527 break;
528
529 case UWB_RC_EVT_DRP_AVAIL:
530 core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
531 offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
532 wIELength);
533 event_size = hwarc_get_event_size(rc, rceb, core_size,
534 offset, buf_size);
535 if (event_size < 0)
536 goto out;
537 *_real_size = event_size;
538 result = hwarc_filter_evt_drp_avail_WUSB_0100(
539 rc, header, buf_size, _new_size);
540 break;
541
542 case UWB_RC_EVT_DRP:
543 core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
544 offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
545 event_size = hwarc_get_event_size(rc, rceb, core_size,
546 offset, buf_size);
547 if (event_size < 0)
548 goto out;
549 *_real_size = event_size;
550 result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
551 buf_size, _new_size);
552 break;
553
554 default:
555 break;
556 }
557out:
558 return result;
559}
560
561/**
562 * Filter data from WUSB device to WHCI driver
563 *
564 * @header: incoming event
565 * @buf_size: size of buffer in which event arrived
566 * @_event_size: actual size of event in the buffer
567 * @_new_size: size of event after filtered
568 *
569 * Filter events based on which protocol the device supports. The WUSB
570 * errata should be the same as WHCI 0.95 so we do not filter that here -
571 * only WUSB 1.0.
572 *
573 * If we don't handle it, we return -ENOANO (why the weird error code?
574 * well, so if I get it, I can pinpoint in the code that raised
575 * it...after all, not too many places use the higher error codes).
576 */
577static
578int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
579 const size_t buf_size, size_t *_real_size,
580 size_t *_new_size)
581{
582 int result = -ENOANO;
583 if (rc->version == 0x0100)
584 result = hwarc_filter_event_WUSB_0100(
585 rc, header, buf_size, _real_size, _new_size);
586 return result;
587}
588
589
590/**
591 * Execute an UWB RC command on HWA
592 *
593 * @rc: Instance of a Radio Controller that is a HWA
594 * @cmd: Buffer containing the RCCB and payload to execute
595 * @cmd_size: Size of the command buffer.
596 *
597 * NOTE: rc's mutex has to be locked
598 */
599static
600int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
601{
602 struct hwarc *hwarc = uwb_rc->priv;
603 return usb_control_msg(
604 hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
605 WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
606 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
607 (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
608}
609
610static
611int hwarc_reset(struct uwb_rc *uwb_rc)
612{
613 struct hwarc *hwarc = uwb_rc->priv;
614 return usb_reset_device(hwarc->usb_dev);
615}
616
617/**
618 * Callback for the notification and event endpoint
619 *
620 * Check's that everything is fine and then passes the read data to
621 * the notification/event handling mechanism (neh).
622 */
623static
624void hwarc_neep_cb(struct urb *urb)
625{
626 struct hwarc *hwarc = urb->context;
627 struct usb_interface *usb_iface = hwarc->usb_iface;
628 struct device *dev = &usb_iface->dev;
629 int result;
630
631 switch (result = urb->status) {
632 case 0:
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100633 uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
634 urb->actual_length);
635 break;
636 case -ECONNRESET: /* Not an error, but a controlled situation; */
637 case -ENOENT: /* (we killed the URB)...so, no broadcast */
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100638 goto out;
639 case -ESHUTDOWN: /* going away! */
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100640 goto out;
641 default: /* On general errors, retry unless it gets ugly */
642 if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
643 EDC_ERROR_TIMEFRAME))
644 goto error_exceeded;
645 dev_err(dev, "NEEP: URB error %d\n", urb->status);
646 }
647 result = usb_submit_urb(urb, GFP_ATOMIC);
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100648 if (result < 0) {
649 dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
650 result);
651 goto error;
652 }
653out:
654 return;
655
656error_exceeded:
657 dev_err(dev, "NEEP: URB max acceptable errors "
658 "exceeded, resetting device\n");
659error:
660 uwb_rc_neh_error(hwarc->uwb_rc, result);
661 uwb_rc_reset_all(hwarc->uwb_rc);
662 return;
663}
664
665static void hwarc_init(struct hwarc *hwarc)
666{
667 edc_init(&hwarc->neep_edc);
668}
669
670/**
671 * Initialize the notification/event endpoint stuff
672 *
673 * Note this is effectively a parallel thread; it knows that
674 * hwarc->uwb_rc always exists because the existence of a 'hwarc'
675 * means that there is a reverence on the hwarc->uwb_rc (see
676 * _probe()), and thus _neep_cb() can execute safely.
677 */
678static int hwarc_neep_init(struct uwb_rc *rc)
679{
680 struct hwarc *hwarc = rc->priv;
681 struct usb_interface *iface = hwarc->usb_iface;
682 struct usb_device *usb_dev = interface_to_usbdev(iface);
683 struct device *dev = &iface->dev;
684 int result;
685 struct usb_endpoint_descriptor *epd;
686
687 epd = &iface->cur_altsetting->endpoint[0].desc;
688 hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
689 if (hwarc->rd_buffer == NULL) {
690 dev_err(dev, "Unable to allocate notification's read buffer\n");
691 goto error_rd_buffer;
692 }
693 hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
694 if (hwarc->neep_urb == NULL) {
695 dev_err(dev, "Unable to allocate notification URB\n");
696 goto error_urb_alloc;
697 }
698 usb_fill_int_urb(hwarc->neep_urb, usb_dev,
699 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
700 hwarc->rd_buffer, PAGE_SIZE,
701 hwarc_neep_cb, hwarc, epd->bInterval);
702 result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
703 if (result < 0) {
704 dev_err(dev, "Cannot submit notification URB: %d\n", result);
705 goto error_neep_submit;
706 }
707 return 0;
708
709error_neep_submit:
710 usb_free_urb(hwarc->neep_urb);
711error_urb_alloc:
712 free_page((unsigned long)hwarc->rd_buffer);
713error_rd_buffer:
714 return -ENOMEM;
715}
716
717
718/** Clean up all the notification endpoint resources */
719static void hwarc_neep_release(struct uwb_rc *rc)
720{
721 struct hwarc *hwarc = rc->priv;
722
723 usb_kill_urb(hwarc->neep_urb);
724 usb_free_urb(hwarc->neep_urb);
725 free_page((unsigned long)hwarc->rd_buffer);
726}
727
728/**
729 * Get the version from class-specific descriptor
730 *
731 * NOTE: this descriptor comes with the big bundled configuration
732 * descriptor that includes the interfaces' and endpoints', so
733 * we just look for it in the cached copy kept by the USB stack.
734 *
735 * NOTE2: We convert LE fields to CPU order.
736 */
737static int hwarc_get_version(struct uwb_rc *rc)
738{
739 int result;
740
741 struct hwarc *hwarc = rc->priv;
742 struct uwb_rc_control_intf_class_desc *descr;
743 struct device *dev = &rc->uwb_dev.dev;
744 struct usb_device *usb_dev = hwarc->usb_dev;
745 char *itr;
746 struct usb_descriptor_header *hdr;
747 size_t itr_size, actconfig_idx;
748 u16 version;
749
750 actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
751 sizeof(usb_dev->config[0]);
752 itr = usb_dev->rawdescriptors[actconfig_idx];
753 itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
754 while (itr_size >= sizeof(*hdr)) {
755 hdr = (struct usb_descriptor_header *) itr;
David Vrabelbce83692008-12-22 18:22:50 +0000756 dev_dbg(dev, "Extra device descriptor: "
757 "type %02x/%u bytes @ %zu (%zu left)\n",
758 hdr->bDescriptorType, hdr->bLength,
759 (itr - usb_dev->rawdescriptors[actconfig_idx]),
760 itr_size);
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100761 if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
762 goto found;
763 itr += hdr->bLength;
764 itr_size -= hdr->bLength;
765 }
766 dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
767 return -ENODEV;
768
769found:
770 result = -EINVAL;
771 if (hdr->bLength > itr_size) { /* is it available? */
772 dev_err(dev, "incomplete Radio Control Interface Class "
773 "descriptor (%zu bytes left, %u needed)\n",
774 itr_size, hdr->bLength);
775 goto error;
776 }
777 if (hdr->bLength < sizeof(*descr)) {
778 dev_err(dev, "short Radio Control Interface Class "
779 "descriptor\n");
780 goto error;
781 }
782 descr = (struct uwb_rc_control_intf_class_desc *) hdr;
783 /* Make LE fields CPU order */
784 version = __le16_to_cpu(descr->bcdRCIVersion);
785 if (version != 0x0100) {
786 dev_err(dev, "Device reports protocol version 0x%04x. We "
787 "do not support that. \n", version);
788 result = -EINVAL;
789 goto error;
790 }
791 rc->version = version;
David Vrabelbce83692008-12-22 18:22:50 +0000792 dev_dbg(dev, "Device supports WUSB protocol version 0x%04x \n", rc->version);
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100793 result = 0;
794error:
795 return result;
796}
797
798/*
799 * By creating a 'uwb_rc', we have a reference on it -- that reference
800 * is the one we drop when we disconnect.
801 *
802 * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
803 * is only one altsetting allowed.
804 */
805static int hwarc_probe(struct usb_interface *iface,
806 const struct usb_device_id *id)
807{
808 int result;
809 struct uwb_rc *uwb_rc;
810 struct hwarc *hwarc;
811 struct device *dev = &iface->dev;
812
813 result = -ENOMEM;
814 uwb_rc = uwb_rc_alloc();
815 if (uwb_rc == NULL) {
816 dev_err(dev, "unable to allocate RC instance\n");
817 goto error_rc_alloc;
818 }
819 hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
820 if (hwarc == NULL) {
821 dev_err(dev, "unable to allocate HWA RC instance\n");
822 goto error_alloc;
823 }
824 hwarc_init(hwarc);
825 hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
826 hwarc->usb_iface = usb_get_intf(iface);
827 hwarc->uwb_rc = uwb_rc;
828
829 uwb_rc->owner = THIS_MODULE;
830 uwb_rc->start = hwarc_neep_init;
831 uwb_rc->stop = hwarc_neep_release;
832 uwb_rc->cmd = hwarc_cmd;
833 uwb_rc->reset = hwarc_reset;
Anderson Lizardoe477a492008-09-17 16:34:35 +0100834 if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) {
835 uwb_rc->filter_cmd = NULL;
836 uwb_rc->filter_event = NULL;
837 } else {
838 uwb_rc->filter_cmd = hwarc_filter_cmd;
839 uwb_rc->filter_event = hwarc_filter_event;
840 }
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100841
842 result = uwb_rc_add(uwb_rc, dev, hwarc);
843 if (result < 0)
844 goto error_rc_add;
845 result = hwarc_get_version(uwb_rc);
846 if (result < 0) {
847 dev_err(dev, "cannot retrieve version of RC \n");
848 goto error_get_version;
849 }
850 usb_set_intfdata(iface, hwarc);
851 return 0;
852
853error_get_version:
854 uwb_rc_rm(uwb_rc);
855error_rc_add:
856 usb_put_intf(iface);
857 usb_put_dev(hwarc->usb_dev);
858error_alloc:
859 uwb_rc_put(uwb_rc);
860error_rc_alloc:
861 return result;
862}
863
864static void hwarc_disconnect(struct usb_interface *iface)
865{
866 struct hwarc *hwarc = usb_get_intfdata(iface);
867 struct uwb_rc *uwb_rc = hwarc->uwb_rc;
868
869 usb_set_intfdata(hwarc->usb_iface, NULL);
870 uwb_rc_rm(uwb_rc);
871 usb_put_intf(hwarc->usb_iface);
872 usb_put_dev(hwarc->usb_dev);
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100873 kfree(hwarc);
874 uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */
875}
876
David Vrabel307ba6d2008-11-07 17:37:33 +0000877static int hwarc_pre_reset(struct usb_interface *iface)
878{
879 struct hwarc *hwarc = usb_get_intfdata(iface);
880 struct uwb_rc *uwb_rc = hwarc->uwb_rc;
881
882 uwb_rc_pre_reset(uwb_rc);
883 return 0;
884}
885
886static int hwarc_post_reset(struct usb_interface *iface)
887{
888 struct hwarc *hwarc = usb_get_intfdata(iface);
889 struct uwb_rc *uwb_rc = hwarc->uwb_rc;
890
David Vrabel0396c212009-08-25 16:41:06 +0100891 return uwb_rc_post_reset(uwb_rc);
David Vrabel307ba6d2008-11-07 17:37:33 +0000892}
893
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100894/** USB device ID's that we handle */
Márton Németh34446d02010-01-12 08:49:14 +0100895static const struct usb_device_id hwarc_id_table[] = {
Anderson Lizardoe477a492008-09-17 16:34:35 +0100896 /* D-Link DUB-1210 */
897 { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
898 .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
Anderson Lizardofa211832008-09-17 16:34:36 +0100899 /* Intel i1480 (using firmware 1.3PA2-20070828) */
900 { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
901 .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
Anderson Lizardoe477a492008-09-17 16:34:35 +0100902 /* Generic match for the Radio Control interface */
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100903 { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
904 { },
905};
906MODULE_DEVICE_TABLE(usb, hwarc_id_table);
907
908static struct usb_driver hwarc_driver = {
909 .name = "hwa-rc",
David Vrabel307ba6d2008-11-07 17:37:33 +0000910 .id_table = hwarc_id_table,
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100911 .probe = hwarc_probe,
912 .disconnect = hwarc_disconnect,
David Vrabel307ba6d2008-11-07 17:37:33 +0000913 .pre_reset = hwarc_pre_reset,
914 .post_reset = hwarc_post_reset,
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100915};
916
Greg Kroah-Hartmanfe748482011-11-18 09:52:10 -0800917module_usb_driver(hwarc_driver);
Inaky Perez-Gonzalezde520b82008-09-17 16:34:15 +0100918
919MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
920MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
921MODULE_LICENSE("GPL");