blob: 858075723c87fc2e010f582385126529ac168fff [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Generic Macintosh NCR5380 driver
3 *
4 * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
5 *
6 * derived in part from:
7 */
8/*
9 * Generic Generic NCR5380 driver
10 *
11 * Copyright 1995, Russell King
12 *
13 * ALPHA RELEASE 1.
14 *
15 * For more information, please consult
16 *
17 * NCR 5380 Family
18 * SCSI Protocol Controller
19 * Databook
20 *
21 * NCR Microelectronics
22 * 1635 Aeroplaza Drive
23 * Colorado Springs, CO 80916
24 * 1+ (719) 578-3400
25 * 1+ (800) 334-5454
26 */
27
28/*
29 * $Log: mac_NCR5380.c,v $
30 */
31
32#include <linux/types.h>
33#include <linux/stddef.h>
34#include <linux/ctype.h>
35#include <linux/delay.h>
36
37#include <linux/module.h>
38#include <linux/signal.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <linux/ioport.h>
40#include <linux/init.h>
41#include <linux/blkdev.h>
42#include <linux/interrupt.h>
43
44#include <asm/io.h>
45#include <asm/irq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046
47#include <asm/macintosh.h>
48#include <asm/macints.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070049#include <asm/mac_via.h>
50
51#include "scsi.h"
52#include <scsi/scsi_host.h>
53#include "mac_scsi.h"
Boaz Harroshe744fde2007-10-16 10:25:01 +020054
55/* These control the behaviour of the generic 5380 core */
56#define AUTOSENSE
57#define PSEUDO_DMA
58
Linus Torvalds1da177e2005-04-16 15:20:36 -070059#include "NCR5380.h"
60
61#if 0
62#define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION)
63#else
64#define NDEBUG (NDEBUG_ABORT)
65#endif
66
67#define RESET_BOOT
68#define DRIVER_SETUP
69
Linus Torvalds1da177e2005-04-16 15:20:36 -070070extern void via_scsi_clear(void);
71
72#ifdef RESET_BOOT
73static void mac_scsi_reset_boot(struct Scsi_Host *instance);
74#endif
75
76static int setup_called = 0;
77static int setup_can_queue = -1;
78static int setup_cmd_per_lun = -1;
79static int setup_sg_tablesize = -1;
80static int setup_use_pdma = -1;
81#ifdef SUPPORT_TAGS
82static int setup_use_tagged_queuing = -1;
83#endif
84static int setup_hostid = -1;
85
86/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
87 * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
88 * need ten times the standard value... */
89#define TOSHIBA_DELAY
90
91#ifdef TOSHIBA_DELAY
92#define AFTER_RESET_DELAY (5*HZ/2)
93#else
94#define AFTER_RESET_DELAY (HZ/2)
95#endif
96
97static volatile unsigned char *mac_scsi_regp = NULL;
98static volatile unsigned char *mac_scsi_drq = NULL;
99static volatile unsigned char *mac_scsi_nodrq = NULL;
100
101
102/*
103 * NCR 5380 register access functions
104 */
105
106#if 0
107/* Debug versions */
108#define CTRL(p,v) (*ctrl = (v))
109
110static char macscsi_read(struct Scsi_Host *instance, int reg)
111{
112 int iobase = instance->io_port;
113 int i;
114 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
115
116 CTRL(iobase, 0);
117 i = in_8(iobase + (reg<<4));
118 CTRL(iobase, 0x40);
119
120 return i;
121}
122
123static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
124{
125 int iobase = instance->io_port;
126 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
127
128 CTRL(iobase, 0);
129 out_8(iobase + (reg<<4), value);
130 CTRL(iobase, 0x40);
131}
132#else
133
134/* Fast versions */
135static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
136{
137 return in_8(instance->io_port + (reg<<4));
138}
139
140static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value)
141{
142 out_8(instance->io_port + (reg<<4), value);
143}
144#endif
145
146
147/*
148 * Function : mac_scsi_setup(char *str)
149 *
150 * Purpose : booter command line initialization of the overrides array,
151 *
152 * Inputs : str - comma delimited list of options
153 *
154 */
155
156static int __init mac_scsi_setup(char *str) {
157#ifdef DRIVER_SETUP
158 int ints[7];
159
160 (void)get_options( str, ARRAY_SIZE(ints), ints);
161
162 if (setup_called++ || ints[0] < 1 || ints[0] > 6) {
163 printk(KERN_WARNING "scsi: <mac5380>"
164 " Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n");
165 printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n");
166 return 0;
167 }
168
169 if (ints[0] >= 1) {
170 if (ints[1] > 0)
171 /* no limits on this, just > 0 */
172 setup_can_queue = ints[1];
173 }
174 if (ints[0] >= 2) {
175 if (ints[2] > 0)
176 setup_cmd_per_lun = ints[2];
177 }
178 if (ints[0] >= 3) {
179 if (ints[3] >= 0) {
180 setup_sg_tablesize = ints[3];
181 /* Must be <= SG_ALL (255) */
182 if (setup_sg_tablesize > SG_ALL)
183 setup_sg_tablesize = SG_ALL;
184 }
185 }
186 if (ints[0] >= 4) {
187 /* Must be between 0 and 7 */
188 if (ints[4] >= 0 && ints[4] <= 7)
189 setup_hostid = ints[4];
190 else if (ints[4] > 7)
191 printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] );
192 }
193#ifdef SUPPORT_TAGS
194 if (ints[0] >= 5) {
195 if (ints[5] >= 0)
196 setup_use_tagged_queuing = !!ints[5];
197 }
198
199 if (ints[0] == 6) {
200 if (ints[6] >= 0)
201 setup_use_pdma = ints[6];
202 }
203#else
204 if (ints[0] == 5) {
205 if (ints[5] >= 0)
206 setup_use_pdma = ints[5];
207 }
208#endif /* SUPPORT_TAGS */
209
210#endif /* DRIVER_SETUP */
211 return 1;
212}
213
214__setup("mac5380=", mac_scsi_setup);
215
216/*
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100217 * Function : int macscsi_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 *
219 * Purpose : initializes mac NCR5380 driver based on the
220 * command line / compile time port and irq definitions.
221 *
222 * Inputs : tpnt - template for this SCSI adapter.
223 *
224 * Returns : 1 if a host adapter was found, 0 if not.
225 *
226 */
227
Geert Uytterhoeven70c26cf2011-06-13 20:39:16 +0200228int __init macscsi_detect(struct scsi_host_template * tpnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229{
230 static int called = 0;
231 int flags = 0;
232 struct Scsi_Host *instance;
233
234 if (!MACH_IS_MAC || called)
235 return( 0 );
236
237 if (macintosh_config->scsi_type != MAC_SCSI_OLD)
238 return( 0 );
239
240 /* setup variables */
241 tpnt->can_queue =
242 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
243 tpnt->cmd_per_lun =
244 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
245 tpnt->sg_tablesize =
246 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
247
248 if (setup_hostid >= 0)
249 tpnt->this_id = setup_hostid;
250 else {
251 /* use 7 as default */
252 tpnt->this_id = 7;
253 }
254
255#ifdef SUPPORT_TAGS
256 if (setup_use_tagged_queuing < 0)
257 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
258#endif
259
260 /* Once we support multiple 5380s (e.g. DuoDock) we'll do
261 something different here */
262 instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
Geert Uytterhoeven5db5c502011-06-13 20:39:17 +0200263
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 if (macintosh_config->ident == MAC_MODEL_IIFX) {
265 mac_scsi_regp = via1+0x8000;
266 mac_scsi_drq = via1+0xE000;
267 mac_scsi_nodrq = via1+0xC000;
268 /* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */
269 flags = FLAG_NO_PSEUDO_DMA;
270 } else {
271 mac_scsi_regp = via1+0x10000;
272 mac_scsi_drq = via1+0x6000;
273 mac_scsi_nodrq = via1+0x12000;
274 }
275
276 if (! setup_use_pdma)
277 flags = FLAG_NO_PSEUDO_DMA;
278
279 instance->io_port = (unsigned long) mac_scsi_regp;
280 instance->irq = IRQ_MAC_SCSI;
281
282#ifdef RESET_BOOT
283 mac_scsi_reset_boot(instance);
284#endif
285
286 NCR5380_init(instance, flags);
287
288 instance->n_io_port = 255;
289
290 ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
291
292 if (instance->irq != SCSI_IRQ_NONE)
Geert Uytterhoevendddaaf72011-12-11 10:04:51 +0100293 if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
295 instance->host_no, instance->irq);
296 instance->irq = SCSI_IRQ_NONE;
297 }
298
299 printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
300 if (instance->irq == SCSI_IRQ_NONE)
301 printk (KERN_INFO "s disabled");
302 else
303 printk (KERN_INFO " %d", instance->irq);
304 printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
305 instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
306 printk(KERN_INFO "\nscsi%d:", instance->host_no);
307 NCR5380_print_options(instance);
308 printk("\n");
309 called = 1;
310 return 1;
311}
312
313int macscsi_release (struct Scsi_Host *shpnt)
314{
315 if (shpnt->irq != SCSI_IRQ_NONE)
Jeff Garzik1e641662007-11-11 19:52:05 -0500316 free_irq(shpnt->irq, shpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317 NCR5380_exit(shpnt);
318
319 return 0;
320}
321
322#ifdef RESET_BOOT
323/*
324 * Our 'bus reset on boot' function
325 */
326
327static void mac_scsi_reset_boot(struct Scsi_Host *instance)
328{
329 unsigned long end;
330
331 NCR5380_local_declare();
332 NCR5380_setup(instance);
333
334 /*
335 * Do a SCSI reset to clean up the bus during initialization. No messing
336 * with the queues, interrupts, or locks necessary here.
337 */
338
339 printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
340
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 /* get in phase */
342 NCR5380_write( TARGET_COMMAND_REG,
343 PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
344
345 /* assert RST */
346 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
347 /* The min. reset hold time is 25us, so 40us should be enough */
348 udelay( 50 );
349 /* reset RST and interrupt */
350 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
351 NCR5380_read( RESET_PARITY_INTERRUPT_REG );
352
353 for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
354 barrier();
355
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356 printk(KERN_INFO " done\n" );
357}
358#endif
359
360const char * macscsi_info (struct Scsi_Host *spnt) {
361 return "";
362}
363
364/*
365 Pseudo-DMA: (Ove Edlund)
366 The code attempts to catch bus errors that occur if one for example
367 "trips over the cable".
368 XXX: Since bus errors in the PDMA routines never happen on my
369 computer, the bus error code is untested.
370 If the code works as intended, a bus error results in Pseudo-DMA
371 beeing disabled, meaning that the driver switches to slow handshake.
372 If bus errors are NOT extremely rare, this has to be changed.
373*/
374
375#define CP_IO_TO_MEM(s,d,len) \
376__asm__ __volatile__ \
377 (" cmp.w #4,%2\n" \
378 " bls 8f\n" \
379 " move.w %1,%%d0\n" \
380 " neg.b %%d0\n" \
381 " and.w #3,%%d0\n" \
382 " sub.w %%d0,%2\n" \
383 " bra 2f\n" \
384 " 1: move.b (%0),(%1)+\n" \
385 " 2: dbf %%d0,1b\n" \
386 " move.w %2,%%d0\n" \
387 " lsr.w #5,%%d0\n" \
388 " bra 4f\n" \
389 " 3: move.l (%0),(%1)+\n" \
390 "31: move.l (%0),(%1)+\n" \
391 "32: move.l (%0),(%1)+\n" \
392 "33: move.l (%0),(%1)+\n" \
393 "34: move.l (%0),(%1)+\n" \
394 "35: move.l (%0),(%1)+\n" \
395 "36: move.l (%0),(%1)+\n" \
396 "37: move.l (%0),(%1)+\n" \
397 " 4: dbf %%d0,3b\n" \
398 " move.w %2,%%d0\n" \
399 " lsr.w #2,%%d0\n" \
400 " and.w #7,%%d0\n" \
401 " bra 6f\n" \
402 " 5: move.l (%0),(%1)+\n" \
403 " 6: dbf %%d0,5b\n" \
404 " and.w #3,%2\n" \
405 " bra 8f\n" \
406 " 7: move.b (%0),(%1)+\n" \
407 " 8: dbf %2,7b\n" \
408 " moveq.l #0, %2\n" \
409 " 9: \n" \
410 ".section .fixup,\"ax\"\n" \
411 " .even\n" \
412 "90: moveq.l #1, %2\n" \
413 " jra 9b\n" \
414 ".previous\n" \
415 ".section __ex_table,\"a\"\n" \
416 " .align 4\n" \
417 " .long 1b,90b\n" \
418 " .long 3b,90b\n" \
419 " .long 31b,90b\n" \
420 " .long 32b,90b\n" \
421 " .long 33b,90b\n" \
422 " .long 34b,90b\n" \
423 " .long 35b,90b\n" \
424 " .long 36b,90b\n" \
425 " .long 37b,90b\n" \
426 " .long 5b,90b\n" \
427 " .long 7b,90b\n" \
428 ".previous" \
429 : "=a"(s), "=a"(d), "=d"(len) \
430 : "0"(s), "1"(d), "2"(len) \
431 : "d0")
432
433
434static int macscsi_pread (struct Scsi_Host *instance,
435 unsigned char *dst, int len)
436{
437 unsigned char *d;
438 volatile unsigned char *s;
439
440 NCR5380_local_declare();
441 NCR5380_setup(instance);
442
443 s = mac_scsi_drq+0x60;
444 d = dst;
445
446/* These conditions are derived from MacOS */
447
448 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
449 && !(NCR5380_read(STATUS_REG) & SR_REQ))
450 ;
451 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
452 && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
453 printk(KERN_ERR "Error in macscsi_pread\n");
454 return -1;
455 }
456
457 CP_IO_TO_MEM(s, d, len);
458
459 if (len != 0) {
460 printk(KERN_NOTICE "Bus error in macscsi_pread\n");
461 return -1;
462 }
463
464 return 0;
465}
466
467
468#define CP_MEM_TO_IO(s,d,len) \
469__asm__ __volatile__ \
470 (" cmp.w #4,%2\n" \
471 " bls 8f\n" \
472 " move.w %0,%%d0\n" \
473 " neg.b %%d0\n" \
474 " and.w #3,%%d0\n" \
475 " sub.w %%d0,%2\n" \
476 " bra 2f\n" \
477 " 1: move.b (%0)+,(%1)\n" \
478 " 2: dbf %%d0,1b\n" \
479 " move.w %2,%%d0\n" \
480 " lsr.w #5,%%d0\n" \
481 " bra 4f\n" \
482 " 3: move.l (%0)+,(%1)\n" \
483 "31: move.l (%0)+,(%1)\n" \
484 "32: move.l (%0)+,(%1)\n" \
485 "33: move.l (%0)+,(%1)\n" \
486 "34: move.l (%0)+,(%1)\n" \
487 "35: move.l (%0)+,(%1)\n" \
488 "36: move.l (%0)+,(%1)\n" \
489 "37: move.l (%0)+,(%1)\n" \
490 " 4: dbf %%d0,3b\n" \
491 " move.w %2,%%d0\n" \
492 " lsr.w #2,%%d0\n" \
493 " and.w #7,%%d0\n" \
494 " bra 6f\n" \
495 " 5: move.l (%0)+,(%1)\n" \
496 " 6: dbf %%d0,5b\n" \
497 " and.w #3,%2\n" \
498 " bra 8f\n" \
499 " 7: move.b (%0)+,(%1)\n" \
500 " 8: dbf %2,7b\n" \
501 " moveq.l #0, %2\n" \
502 " 9: \n" \
503 ".section .fixup,\"ax\"\n" \
504 " .even\n" \
505 "90: moveq.l #1, %2\n" \
506 " jra 9b\n" \
507 ".previous\n" \
508 ".section __ex_table,\"a\"\n" \
509 " .align 4\n" \
510 " .long 1b,90b\n" \
511 " .long 3b,90b\n" \
512 " .long 31b,90b\n" \
513 " .long 32b,90b\n" \
514 " .long 33b,90b\n" \
515 " .long 34b,90b\n" \
516 " .long 35b,90b\n" \
517 " .long 36b,90b\n" \
518 " .long 37b,90b\n" \
519 " .long 5b,90b\n" \
520 " .long 7b,90b\n" \
521 ".previous" \
522 : "=a"(s), "=a"(d), "=d"(len) \
523 : "0"(s), "1"(d), "2"(len) \
524 : "d0")
525
526static int macscsi_pwrite (struct Scsi_Host *instance,
527 unsigned char *src, int len)
528{
529 unsigned char *s;
530 volatile unsigned char *d;
531
532 NCR5380_local_declare();
533 NCR5380_setup(instance);
534
535 s = src;
536 d = mac_scsi_drq;
537
538/* These conditions are derived from MacOS */
539
540 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
541 && (!(NCR5380_read(STATUS_REG) & SR_REQ)
542 || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
543 ;
544 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
545 printk(KERN_ERR "Error in macscsi_pwrite\n");
546 return -1;
547 }
548
549 CP_MEM_TO_IO(s, d, len);
550
551 if (len != 0) {
552 printk(KERN_NOTICE "Bus error in macscsi_pwrite\n");
553 return -1;
554 }
555
556 return 0;
557}
558
559
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560#include "NCR5380.c"
561
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100562static struct scsi_host_template driver_template = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700563 .proc_name = "Mac5380",
Al Virodd7ab712013-03-31 01:15:54 -0400564 .show_info = macscsi_show_info,
565 .write_info = macscsi_write_info,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566 .name = "Macintosh NCR5380 SCSI",
567 .detect = macscsi_detect,
568 .release = macscsi_release,
569 .info = macscsi_info,
570 .queuecommand = macscsi_queue_command,
571 .eh_abort_handler = macscsi_abort,
572 .eh_bus_reset_handler = macscsi_bus_reset,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 .can_queue = CAN_QUEUE,
574 .this_id = 7,
575 .sg_tablesize = SG_ALL,
576 .cmd_per_lun = CMD_PER_LUN,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 .use_clustering = DISABLE_CLUSTERING
578};
579
580
581#include "scsi_module.c"