blob: 14b3d8422502c49f580941c22a037815b785b500 [file] [log] [blame]
Roman Zippel80daa562008-01-14 04:51:16 +01001config ARCH
2 string
3 option env="ARCH"
4
5config KERNELVERSION
6 string
7 option env="KERNELVERSION"
8
Roman Zippelface4372006-06-08 22:12:45 -07009config DEFCONFIG_LIST
10 string
Paolo 'Blaisorblade' Giarrussob2670eac2006-10-19 23:28:23 -070011 depends on !UML
Roman Zippelface4372006-06-08 22:12:45 -070012 option defconfig_list
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
Sam Ravnborg73531902008-05-25 23:03:18 +020016 default "$ARCH_DEFCONFIG"
Roman Zippelface4372006-06-08 22:12:45 -070017 default "arch/$ARCH/defconfig"
18
Peter Oberparleiterb99b87f2009-06-17 16:28:03 -070019config CONSTRUCTORS
20 bool
21 depends on !UML
Peter Oberparleiterb99b87f2009-06-17 16:28:03 -070022
Peter Zijlstrae360adb2010-10-14 14:01:34 +080023config IRQ_WORK
24 bool
Peter Zijlstrae360adb2010-10-14 14:01:34 +080025
David Daney1dbdc6f2012-04-19 14:59:57 -070026config BUILDTIME_EXTABLE_SORT
27 bool
28
Al Boldiff0cfc62007-07-31 00:39:23 -070029menu "General setup"
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
Linus Torvalds1da177e2005-04-16 15:20:36 -070031config BROKEN
32 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -070033
34config BROKEN_ON_SMP
35 bool
36 depends on BROKEN || !SMP
37 default y
38
Linus Torvalds1da177e2005-04-16 15:20:36 -070039config INIT_ENV_ARG_LIMIT
40 int
Adrian Bunkdd673bc2006-06-30 01:55:51 -070041 default 32 if !UML
42 default 128 if UML
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080044 Maximum of each of the number of arguments and environment
45 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070046
Linus Torvalds1da177e2005-04-16 15:20:36 -070047
Roland McGrath84336462009-12-21 16:24:06 -080048config CROSS_COMPILE
49 string "Cross-compiler tool prefix"
50 help
51 Same as running 'make CROSS_COMPILE=prefix-' but stored for
52 default make runs in this kernel build directory. You don't
53 need to set this unless you want the configured kernel build
54 directory to select the cross-compiler automatically.
55
Jiri Slaby4bb16672013-05-22 10:56:24 +020056config COMPILE_TEST
57 bool "Compile also drivers which will not load"
58 default n
59 help
60 Some drivers can be compiled on a different platform than they are
61 intended to be run on. Despite they cannot be loaded there (or even
62 when they load they cannot be used due to missing HW support),
63 developers still, opposing to distributors, might want to build such
64 drivers to compile-test them.
65
66 If you are a developer and want to build everything available, say Y
67 here. If you are a user/distributor, say N here to exclude useless
68 drivers to be distributed.
69
Linus Torvalds1da177e2005-04-16 15:20:36 -070070config LOCALVERSION
71 string "Local version - append to kernel release"
72 help
73 Append an extra string to the end of your kernel version.
74 This will show up when you type uname, for example.
75 The string you set here will be appended after the contents of
76 any files with a filename matching localversion* in your
77 object and source tree, in that order. Your total string can
78 be a maximum of 64 characters.
79
Ryan Andersonaaebf432005-07-31 04:57:49 -040080config LOCALVERSION_AUTO
81 bool "Automatically append version information to the version string"
82 default y
83 help
84 This will try to automatically determine if the current tree is a
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020085 release tree by looking for git tags that belong to the current
86 top of tree revision.
Ryan Andersonaaebf432005-07-31 04:57:49 -040087
88 A string of the format -gxxxxxxxx will be added to the localversion
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020089 if a git-based tree is found. The string generated by this will be
Ryan Andersonaaebf432005-07-31 04:57:49 -040090 appended after any matching localversion* files, and after the value
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020091 set in CONFIG_LOCALVERSION.
Ryan Andersonaaebf432005-07-31 04:57:49 -040092
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020093 (The actual string used here is the first eight characters produced
94 by running the command:
95
96 $ git rev-parse --verify HEAD
97
98 which is done within the script "scripts/setlocalversion".)
Ryan Andersonaaebf432005-07-31 04:57:49 -040099
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800100config HAVE_KERNEL_GZIP
101 bool
102
103config HAVE_KERNEL_BZIP2
104 bool
105
106config HAVE_KERNEL_LZMA
107 bool
108
Lasse Collin3ebe1242011-01-12 17:01:23 -0800109config HAVE_KERNEL_XZ
110 bool
111
Albin Tonnerre7dd65fe2010-01-08 14:42:42 -0800112config HAVE_KERNEL_LZO
113 bool
114
Kyungsik Leee76e1fd2013-07-08 16:01:46 -0700115config HAVE_KERNEL_LZ4
116 bool
117
Alain Knaff30d65db2009-01-04 22:46:17 +0100118choice
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800119 prompt "Kernel compression mode"
120 default KERNEL_GZIP
H. Peter Anvin2d3c6272013-11-14 21:43:47 -0800121 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800122 help
Alain Knaff30d65db2009-01-04 22:46:17 +0100123 The linux kernel is a kind of self-extracting executable.
124 Several compression algorithms are available, which differ
125 in efficiency, compression and decompression speed.
126 Compression speed is only relevant when building a kernel.
127 Decompression speed is relevant at each boot.
128
129 If you have any problems with bzip2 or lzma compressed
130 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
131 version of this functionality (bzip2 only), for 2.4, was
132 supplied by Christian Ludwig)
133
134 High compression options are mostly useful for users, who
135 are low on disk space (embedded systems), but for whom ram
136 size matters less.
137
138 If in doubt, select 'gzip'
139
140config KERNEL_GZIP
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800141 bool "Gzip"
142 depends on HAVE_KERNEL_GZIP
143 help
Albin Tonnerre7dd65fe2010-01-08 14:42:42 -0800144 The old and tried gzip compression. It provides a good balance
145 between compression ratio and decompression speed.
Alain Knaff30d65db2009-01-04 22:46:17 +0100146
147config KERNEL_BZIP2
148 bool "Bzip2"
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800149 depends on HAVE_KERNEL_BZIP2
Alain Knaff30d65db2009-01-04 22:46:17 +0100150 help
151 Its compression ratio and speed is intermediate.
Randy Dunlap0a4dd352012-05-31 16:26:46 -0700152 Decompression speed is slowest among the choices. The kernel
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800153 size is about 10% smaller with bzip2, in comparison to gzip.
154 Bzip2 uses a large amount of memory. For modern kernels you
155 will need at least 8MB RAM or more for booting.
Alain Knaff30d65db2009-01-04 22:46:17 +0100156
157config KERNEL_LZMA
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800158 bool "LZMA"
159 depends on HAVE_KERNEL_LZMA
160 help
Randy Dunlap0a4dd352012-05-31 16:26:46 -0700161 This compression algorithm's ratio is best. Decompression speed
162 is between gzip and bzip2. Compression is slowest.
163 The kernel size is about 33% smaller with LZMA in comparison to gzip.
Alain Knaff30d65db2009-01-04 22:46:17 +0100164
Lasse Collin3ebe1242011-01-12 17:01:23 -0800165config KERNEL_XZ
166 bool "XZ"
167 depends on HAVE_KERNEL_XZ
168 help
169 XZ uses the LZMA2 algorithm and instruction set specific
170 BCJ filters which can improve compression ratio of executable
171 code. The size of the kernel is about 30% smaller with XZ in
172 comparison to gzip. On architectures for which there is a BCJ
173 filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
174 will create a few percent smaller kernel than plain LZMA.
175
176 The speed is about the same as with LZMA: The decompression
177 speed of XZ is better than that of bzip2 but worse than gzip
178 and LZO. Compression is slow.
179
Albin Tonnerre7dd65fe2010-01-08 14:42:42 -0800180config KERNEL_LZO
181 bool "LZO"
182 depends on HAVE_KERNEL_LZO
183 help
Randy Dunlap0a4dd352012-05-31 16:26:46 -0700184 Its compression ratio is the poorest among the choices. The kernel
Stephan Sperber681b3042010-07-14 11:23:08 +0200185 size is about 10% bigger than gzip; however its speed
Albin Tonnerre7dd65fe2010-01-08 14:42:42 -0800186 (both compression and decompression) is the fastest.
187
Kyungsik Leee76e1fd2013-07-08 16:01:46 -0700188config KERNEL_LZ4
189 bool "LZ4"
190 depends on HAVE_KERNEL_LZ4
191 help
192 LZ4 is an LZ77-type compressor with a fixed, byte-oriented encoding.
193 A preliminary version of LZ4 de/compression tool is available at
194 <https://code.google.com/p/lz4/>.
195
196 Its compression ratio is worse than LZO. The size of the kernel
197 is about 8% bigger than LZO. But the decompression speed is
198 faster than LZO.
199
Alain Knaff30d65db2009-01-04 22:46:17 +0100200endchoice
201
Josh Triplettbd5dc172011-06-15 15:08:28 -0700202config DEFAULT_HOSTNAME
203 string "Default hostname"
204 default "(none)"
205 help
206 This option determines the default system hostname before userspace
207 calls sethostname(2). The kernel traditionally uses "(none)" here,
208 but you may wish to use a different default here to make a minimal
209 system more usable with less configuration.
210
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211config SWAP
212 bool "Support for paging of anonymous memory (swap)"
David Howells93614012006-09-30 20:45:40 +0200213 depends on MMU && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214 default y
215 help
216 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100217 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 used to provide more virtual memory than the actual RAM present
219 in your computer. If unsure say Y.
220
221config SYSVIPC
222 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223 ---help---
224 Inter Process Communication is a suite of library functions and
225 system calls which let processes (running programs) synchronize and
226 exchange information. It is generally considered to be a good thing,
227 and some programs won't run unless you say Y here. In particular, if
228 you want to run the DOS emulator dosemu under Linux (read the
229 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
230 you'll need to say Y here.
231
232 You can find documentation about IPC with "info ipc" and also in
233 section 6.4 of the Linux Programmer's Guide, available from
234 <http://www.tldp.org/guides.html>.
235
Eric W. Biedermana5494dc2007-02-14 00:34:06 -0800236config SYSVIPC_SYSCTL
237 bool
238 depends on SYSVIPC
239 depends on SYSCTL
240 default y
241
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242config POSIX_MQUEUE
243 bool "POSIX Message Queues"
Kees Cook19c92392012-10-02 11:19:29 -0700244 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 ---help---
246 POSIX variant of message queues is a part of IPC. In POSIX message
247 queues every message has a priority which decides about succession
248 of receiving it by a process. If you want to compile and run
249 programs written e.g. for Solaris with use of its POSIX message
Robert P. J. Dayb0e37652007-05-09 07:25:13 +0200250 queues (functions mq_*) say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251
252 POSIX message queues are visible as a filesystem called 'mqueue'
253 and can be mounted somewhere if you want to do filesystem
254 operations on message queues.
255
256 If unsure, say Y.
257
Serge E. Hallynbdc8e5f2009-04-06 19:01:11 -0700258config POSIX_MQUEUE_SYSCTL
259 bool
260 depends on POSIX_MQUEUE
261 depends on SYSCTL
262 default y
263
Konstantin Khlebnikov226b4cc2014-06-04 16:10:50 -0700264config CROSS_MEMORY_ATTACH
265 bool "Enable process_vm_readv/writev syscalls"
266 depends on MMU
267 default y
268 help
269 Enabling this option adds the system calls process_vm_readv and
270 process_vm_writev which allow a process with the correct privileges
Geert Uytterhoevena2a368d2014-08-12 13:46:11 -0700271 to directly read from or write to another process' address space.
Konstantin Khlebnikov226b4cc2014-06-04 16:10:50 -0700272 See the man page for more details.
273
Aneesh Kumar K.V990d6c22011-01-29 18:43:26 +0530274config FHANDLE
275 bool "open by fhandle syscalls"
276 select EXPORTFS
277 help
278 If you say Y here, a user level program will be able to map
279 file names to handle and then later use the handle for
280 different file system operations. This is useful in implementing
281 userspace file servers, which now track files using handles instead
282 of names. The handle would remain the same even if file names
283 get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
284 syscalls.
285
Josh Triplett69369a72014-04-03 14:48:27 -0700286config USELIB
287 bool "uselib syscall"
288 default y
289 help
290 This option enables the uselib syscall, a system call used in the
291 dynamic linker from libc5 and earlier. glibc does not use this
292 system call. If you intend to run programs built on libc5 or
293 earlier, you may need to enable this syscall. Current systems
294 running glibc can safely disable this.
295
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296config AUDIT
297 bool "Auditing support"
Chris Wright804a6a492005-05-11 10:52:45 +0100298 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299 help
300 Enable auditing infrastructure that can be used with another
301 kernel subsystem, such as SELinux (which requires this for
302 logging of avc messages output). Does not do system-call
303 auditing without CONFIG_AUDITSYSCALL.
304
AKASHI Takahiro7a017722014-02-25 18:16:24 +0900305config HAVE_ARCH_AUDITSYSCALL
306 bool
307
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308config AUDITSYSCALL
309 bool "Enable system-call auditing support"
AKASHI Takahiro7a017722014-02-25 18:16:24 +0900310 depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 default y if SECURITY_SELINUX
312 help
313 Enable low-overhead system-call auditing infrastructure that
314 can be used independently or with another kernel subsystem,
Eric Paris67640b62009-12-17 20:12:06 -0500315 such as SELinux.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316
Eric Paris939a67f2009-12-17 20:12:06 -0500317config AUDIT_WATCH
318 def_bool y
319 depends on AUDITSYSCALL
320 select FSNOTIFY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321
Al Viro74c3cbe2007-07-22 08:04:18 -0400322config AUDIT_TREE
323 def_bool y
Eric Paris63c882a2009-05-21 17:02:01 -0400324 depends on AUDITSYSCALL
Eric Paris28a3a7e2009-12-17 20:12:05 -0500325 select FSNOTIFY
Al Viro74c3cbe2007-07-22 08:04:18 -0400326
Thomas Gleixnerd9817eb2010-09-27 12:45:59 +0000327source "kernel/irq/Kconfig"
Thomas Gleixner764e0da2012-05-21 23:16:18 +0200328source "kernel/time/Kconfig"
Thomas Gleixnerd9817eb2010-09-27 12:45:59 +0000329
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200330menu "CPU/Task time and stats accounting"
331
Frederic Weisbeckerabf917c2012-07-25 07:56:04 +0200332config VIRT_CPU_ACCOUNTING
333 bool
334
Frederic Weisbeckerfdf9c352012-09-09 14:56:31 +0200335choice
336 prompt "Cputime accounting"
337 default TICK_CPU_ACCOUNTING if !PPC64
Stephen Rothwell02fc8d32013-02-08 14:19:38 +1100338 default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
Frederic Weisbeckerfdf9c352012-09-09 14:56:31 +0200339
340# Kind of a stub config for the pure tick based cputime accounting
341config TICK_CPU_ACCOUNTING
342 bool "Simple tick based cputime accounting"
Frederic Weisbeckerc58b0df2013-04-26 15:16:31 +0200343 depends on !S390 && !NO_HZ_FULL
Frederic Weisbeckerfdf9c352012-09-09 14:56:31 +0200344 help
345 This is the basic tick based cputime accounting that maintains
346 statistics about user, system and idle time spent on per jiffies
347 granularity.
348
349 If unsure, say Y.
350
Frederic Weisbeckerabf917c2012-07-25 07:56:04 +0200351config VIRT_CPU_ACCOUNTING_NATIVE
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200352 bool "Deterministic task and CPU time accounting"
Frederic Weisbeckerc58b0df2013-04-26 15:16:31 +0200353 depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
Frederic Weisbeckerabf917c2012-07-25 07:56:04 +0200354 select VIRT_CPU_ACCOUNTING
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200355 help
356 Select this option to enable more accurate task and CPU time
357 accounting. This is done by reading a CPU counter on each
358 kernel entry and exit and on transitions within the kernel
359 between system, softirq and hardirq state, so there is a
360 small performance impact. In the case of s390 or IBM POWER > 5,
361 this also enables accounting of stolen time on logically-partitioned
362 systems.
363
Frederic Weisbeckerabf917c2012-07-25 07:56:04 +0200364config VIRT_CPU_ACCOUNTING_GEN
365 bool "Full dynticks CPU time accounting"
Kevin Hilmanff3fb252013-09-16 15:28:19 -0700366 depends on HAVE_CONTEXT_TRACKING
Kevin Hilman554b0002013-09-16 15:28:21 -0700367 depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
Frederic Weisbeckerabf917c2012-07-25 07:56:04 +0200368 select VIRT_CPU_ACCOUNTING
369 select CONTEXT_TRACKING
370 help
371 Select this option to enable task and CPU time accounting on full
372 dynticks systems. This accounting is implemented by watching every
373 kernel-user boundaries using the context tracking subsystem.
374 The accounting is thus performed at the expense of some significant
375 overhead.
376
377 For now this is only useful if you are working on the full
378 dynticks subsystem development.
379
380 If unsure, say N.
381
Frederic Weisbeckerfdf9c352012-09-09 14:56:31 +0200382config IRQ_TIME_ACCOUNTING
383 bool "Fine granularity task level IRQ time accounting"
Frederic Weisbeckerc58b0df2013-04-26 15:16:31 +0200384 depends on HAVE_IRQ_TIME_ACCOUNTING && !NO_HZ_FULL
Frederic Weisbeckerfdf9c352012-09-09 14:56:31 +0200385 help
386 Select this option to enable fine granularity task irq time
387 accounting. This is done by reading a timestamp on each
388 transitions between softirq and hardirq state, so there can be a
389 small performance impact.
390
391 If in doubt, say N here.
392
393endchoice
394
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200395config BSD_PROCESS_ACCT
396 bool "BSD Process Accounting"
Iulia Manda28138932015-04-15 16:16:41 -0700397 depends on MULTIUSER
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200398 help
399 If you say Y here, a user level program will be able to instruct the
400 kernel (via a special system call) to write process accounting
401 information to a file: whenever a process exits, information about
402 that process will be appended to the file by the kernel. The
403 information includes things such as creation time, owning user,
404 command name, memory usage, controlling terminal etc. (the complete
405 list is in the struct acct in <file:include/linux/acct.h>). It is
406 up to the user level program to do useful things with this
407 information. This is generally a good idea, so say Y.
408
409config BSD_PROCESS_ACCT_V3
410 bool "BSD Process Accounting version 3 file format"
411 depends on BSD_PROCESS_ACCT
412 default n
413 help
414 If you say Y here, the process accounting information is written
415 in a new file format that also logs the process IDs of each
416 process and it's parent. Note that this file format is incompatible
417 with previous v0/v1/v2 file formats, so you will need updated tools
418 for processing it. A preliminary version of these tools is available
419 at <http://www.gnu.org/software/acct/>.
420
421config TASKSTATS
Kees Cook19c92392012-10-02 11:19:29 -0700422 bool "Export task/process statistics through netlink"
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200423 depends on NET
Iulia Manda28138932015-04-15 16:16:41 -0700424 depends on MULTIUSER
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200425 default n
426 help
427 Export selected statistics for tasks/processes through the
428 generic netlink interface. Unlike BSD process accounting, the
429 statistics are available during the lifetime of tasks/processes as
430 responses to commands. Like BSD accounting, they are sent to user
431 space on task exit.
432
433 Say N if unsure.
434
435config TASK_DELAY_ACCT
Kees Cook19c92392012-10-02 11:19:29 -0700436 bool "Enable per-task delay accounting"
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200437 depends on TASKSTATS
Naveen N. Raof6db8342015-06-25 23:53:37 +0530438 select SCHED_INFO
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200439 help
440 Collect information on time spent by a task waiting for system
441 resources like cpu, synchronous block I/O completion and swapping
442 in pages. Such statistics can help in setting a task's priorities
443 relative to other tasks for cpu, io, rss limits etc.
444
445 Say N if unsure.
446
447config TASK_XACCT
Kees Cook19c92392012-10-02 11:19:29 -0700448 bool "Enable extended accounting over taskstats"
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200449 depends on TASKSTATS
450 help
451 Collect extended task accounting data and send the data
452 to userland for processing over the taskstats interface.
453
454 Say N if unsure.
455
456config TASK_IO_ACCOUNTING
Kees Cook19c92392012-10-02 11:19:29 -0700457 bool "Enable per-task storage I/O accounting"
Frederic Weisbecker391dc692012-09-09 14:22:07 +0200458 depends on TASK_XACCT
459 help
460 Collect information on the number of bytes of storage I/O which this
461 task has caused.
462
463 Say N if unsure.
464
465endmenu # "CPU/Task time and stats accounting"
466
Mike Travisc903ff82009-01-15 12:28:29 -0800467menu "RCU Subsystem"
468
Mike Travisc903ff82009-01-15 12:28:29 -0800469config TREE_RCU
Pranith Kumare72aeaf2015-04-21 17:29:42 -0400470 bool
471 default y if !PREEMPT && SMP
Mike Travisc903ff82009-01-15 12:28:29 -0800472 help
473 This option selects the RCU implementation that is
474 designed for very large SMP system with hundreds or
Paul E. McKenneyc17ef452009-06-23 17:12:47 -0700475 thousands of CPUs. It also scales down nicely to
476 smaller systems.
Mike Travisc903ff82009-01-15 12:28:29 -0800477
Pranith Kumar28f65692014-09-22 14:00:48 -0400478config PREEMPT_RCU
Pranith Kumare72aeaf2015-04-21 17:29:42 -0400479 bool
480 default y if PREEMPT
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700481 help
482 This option selects the RCU implementation that is
483 designed for very large SMP systems with hundreds or
484 thousands of CPUs, but for which real-time response
Paul E. McKenneybbe3eae2009-09-13 09:15:08 -0700485 is also required. It also scales down nicely to
486 smaller systems.
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700487
Paul E. McKenney9fc52d82013-01-08 15:48:33 -0800488 Select this option if you are unsure.
489
Paul E. McKenney9b1d82f2009-10-25 19:03:50 -0700490config TINY_RCU
Pranith Kumare72aeaf2015-04-21 17:29:42 -0400491 bool
492 default y if !PREEMPT && !SMP
Paul E. McKenney9b1d82f2009-10-25 19:03:50 -0700493 help
494 This option selects the RCU implementation that is
495 designed for UP systems from which real-time response
496 is not required. This option greatly reduces the
497 memory footprint of RCU.
498
Paul E. McKenney78cae102015-04-20 12:19:45 -0700499config RCU_EXPERT
500 bool "Make expert-level adjustments to RCU configuration"
501 default n
502 help
503 This option needs to be enabled if you wish to make
504 expert-level adjustments to RCU configuration. By default,
505 no such adjustments can be made, which has the often-beneficial
506 side-effect of preventing "make oldconfig" from asking you all
507 sorts of detailed questions about how you would like numerous
508 obscure RCU options to be set up.
509
510 Say Y if you need to make expert-level adjustments to RCU.
511
512 Say N if you are unsure.
513
Pranith Kumar83fe27e2014-12-05 11:24:45 -0500514config SRCU
515 bool
516 help
517 This option selects the sleepable version of RCU. This version
518 permits arbitrary sleeping or blocking within RCU read-side critical
519 sections.
520
Paul E. McKenney8315f422014-06-27 13:42:20 -0700521config TASKS_RCU
Paul E. McKenney82d0f4c2015-04-20 05:42:50 -0700522 bool
Paul E. McKenney8315f422014-06-27 13:42:20 -0700523 default n
Pranith Kumar83fe27e2014-12-05 11:24:45 -0500524 select SRCU
Paul E. McKenney8315f422014-06-27 13:42:20 -0700525 help
526 This option enables a task-based RCU implementation that uses
527 only voluntary context switch (not preemption!), idle, and
528 user-mode execution as quiescent states.
529
Paul E. McKenney6bfc09e2012-10-19 12:49:17 -0700530config RCU_STALL_COMMON
Pranith Kumar28f65692014-09-22 14:00:48 -0400531 def_bool ( TREE_RCU || PREEMPT_RCU || RCU_TRACE )
Paul E. McKenney6bfc09e2012-10-19 12:49:17 -0700532 help
533 This option enables RCU CPU stall code that is common between
534 the TINY and TREE variants of RCU. The purpose is to allow
535 the tiny variants to disable RCU CPU stall warnings, while
536 making these warnings mandatory for the tree variants.
537
Frederic Weisbecker91d1aa432012-11-27 19:33:25 +0100538config CONTEXT_TRACKING
539 bool
540
Frederic Weisbecker2b1d5022012-07-11 20:26:30 +0200541config RCU_USER_QS
Paul E. McKenney7db21ed2015-04-20 06:17:15 -0700542 bool
Frederic Weisbecker2b1d5022012-07-11 20:26:30 +0200543 help
544 This option sets hooks on kernel / userspace boundaries and
545 puts RCU in extended quiescent state when the CPU runs in
546 userspace. It means that when a CPU runs in userspace, it is
547 excluded from the global RCU state machine and thus doesn't
Paul Gortmakeraf71bef2012-10-24 11:07:09 -0700548 try to keep the timer tick on for RCU.
Frederic Weisbecker2b1d5022012-07-11 20:26:30 +0200549
Frederic Weisbecker91d1aa432012-11-27 19:33:25 +0100550config CONTEXT_TRACKING_FORCE
551 bool "Force context tracking"
552 depends on CONTEXT_TRACKING
Frederic Weisbeckerd84d27a2013-07-24 21:59:29 +0200553 default y if !NO_HZ_FULL
Frederic Weisbecker1fd2b442012-07-11 20:26:40 +0200554 help
Frederic Weisbeckerd84d27a2013-07-24 21:59:29 +0200555 The major pre-requirement for full dynticks to work is to
556 support the context tracking subsystem. But there are also
557 other dependencies to provide in order to make the full
558 dynticks working.
559
560 This option stands for testing when an arch implements the
561 context tracking backend but doesn't yet fullfill all the
562 requirements to make the full dynticks feature working.
563 Without the full dynticks, there is no way to test the support
564 for context tracking and the subsystems that rely on it: RCU
565 userspace extended quiescent state and tickless cputime
566 accounting. This option copes with the absence of the full
567 dynticks subsystem by forcing the context tracking on all
568 CPUs in the system.
569
Paul Gortmaker99c8b1e2013-10-24 10:07:47 -0400570 Say Y only if you're working on the development of an
Frederic Weisbeckerd84d27a2013-07-24 21:59:29 +0200571 architecture backend for the context tracking.
572
573 Say N otherwise, this option brings an overhead that you
574 don't want in production.
575
Frederic Weisbeckerd6771242012-10-11 01:48:28 +0200576
Mike Travisc903ff82009-01-15 12:28:29 -0800577config RCU_FANOUT
578 int "Tree-based hierarchical RCU fanout value"
579 range 2 64 if 64BIT
580 range 2 32 if !64BIT
Paul E. McKenney05c5df32015-04-20 14:27:43 -0700581 depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
Mike Travisc903ff82009-01-15 12:28:29 -0800582 default 64 if 64BIT
583 default 32 if !64BIT
584 help
585 This option controls the fanout of hierarchical implementations
586 of RCU, allowing RCU to work efficiently on machines with
Paul E. McKenney4d87ffa2010-08-04 17:31:12 -0700587 large numbers of CPUs. This value must be at least the fourth
588 root of NR_CPUS, which allows NR_CPUS to be insanely large.
589 The default value of RCU_FANOUT should be used for production
590 systems, but if you are stress-testing the RCU implementation
591 itself, small RCU_FANOUT values allow you to test large-system
592 code paths on small(er) systems.
Mike Travisc903ff82009-01-15 12:28:29 -0800593
594 Select a specific number if testing RCU itself.
595 Take the default if unsure.
596
Paul E. McKenney8932a632012-04-19 12:20:14 -0700597config RCU_FANOUT_LEAF
598 int "Tree-based hierarchical RCU leaf-level fanout value"
Paul E. McKenney8739c5c2015-04-20 18:27:54 -0700599 range 2 64 if 64BIT
600 range 2 32 if !64BIT
Paul E. McKenney47d631a2015-04-21 09:12:13 -0700601 depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
Paul E. McKenney8932a632012-04-19 12:20:14 -0700602 default 16
603 help
604 This option controls the leaf-level fanout of hierarchical
605 implementations of RCU, and allows trading off cache misses
606 against lock contention. Systems that synchronize their
607 scheduling-clock interrupts for energy-efficiency reasons will
608 want the default because the smaller leaf-level fanout keeps
609 lock contention levels acceptably low. Very large systems
610 (hundreds or thousands of CPUs) will instead want to set this
611 value to the maximum value possible in order to reduce the
612 number of cache misses incurred during RCU's grace-period
613 initialization. These systems tend to run CPU-bound, and thus
614 are not helped by synchronized interrupts, and thus tend to
615 skew them, which reduces lock contention enough that large
616 leaf-level fanouts work well.
617
618 Select a specific number if testing RCU itself.
619
620 Select the maximum permissible value for large systems.
621
622 Take the default if unsure.
623
Paul E. McKenney8bd93a22010-02-22 17:04:59 -0800624config RCU_FAST_NO_HZ
625 bool "Accelerate last non-dyntick-idle CPU's grace periods"
Paul E. McKenney78cae102015-04-20 12:19:45 -0700626 depends on NO_HZ_COMMON && SMP && RCU_EXPERT
Paul E. McKenney8bd93a22010-02-22 17:04:59 -0800627 default n
628 help
Paul E. McKenneyc0f4dfd2012-12-28 11:30:36 -0800629 This option permits CPUs to enter dynticks-idle state even if
630 they have RCU callbacks queued, and prevents RCU from waking
631 these CPUs up more than roughly once every four jiffies (by
632 default, you can adjust this using the rcutree.rcu_idle_gp_delay
633 parameter), thus improving energy efficiency. On the other
634 hand, this option increases the duration of RCU grace periods,
635 for example, slowing down synchronize_rcu().
Paul E. McKenney8bd93a22010-02-22 17:04:59 -0800636
Paul E. McKenneyc0f4dfd2012-12-28 11:30:36 -0800637 Say Y if energy efficiency is critically important, and you
638 don't care about increased grace-period durations.
Paul E. McKenney8bd93a22010-02-22 17:04:59 -0800639
640 Say N if you are unsure.
641
Mike Travisc903ff82009-01-15 12:28:29 -0800642config TREE_RCU_TRACE
Pranith Kumar28f65692014-09-22 14:00:48 -0400643 def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
Mike Travisc903ff82009-01-15 12:28:29 -0800644 select DEBUG_FS
645 help
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700646 This option provides tracing for the TREE_RCU and
Pranith Kumar28f65692014-09-22 14:00:48 -0400647 PREEMPT_RCU implementations, permitting Makefile to
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700648 trivially select kernel/rcutree_trace.c.
Mike Travisc903ff82009-01-15 12:28:29 -0800649
Paul E. McKenney24278d12010-09-27 17:25:23 -0700650config RCU_BOOST
651 bool "Enable RCU priority boosting"
Paul E. McKenney78cae102015-04-20 12:19:45 -0700652 depends on RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT
Paul E. McKenney24278d12010-09-27 17:25:23 -0700653 default n
654 help
655 This option boosts the priority of preempted RCU readers that
656 block the current preemptible RCU grace period for too long.
657 This option also prevents heavy loads from blocking RCU
658 callback invocation for all flavors of RCU.
659
660 Say Y here if you are working with real-time apps or heavy loads
661 Say N here if you are unsure.
662
Clark Williams21871d72014-09-12 21:21:09 -0500663config RCU_KTHREAD_PRIO
664 int "Real-time priority to use for RCU worker threads"
Paul E. McKenneya94844b2014-12-12 07:37:48 -0800665 range 1 99 if RCU_BOOST
666 range 0 99 if !RCU_BOOST
667 default 1 if RCU_BOOST
668 default 0 if !RCU_BOOST
Paul E. McKenney26730f52015-04-21 09:22:14 -0700669 depends on RCU_EXPERT
Paul E. McKenney24278d12010-09-27 17:25:23 -0700670 help
Clark Williams21871d72014-09-12 21:21:09 -0500671 This option specifies the SCHED_FIFO priority value that will be
672 assigned to the rcuc/n and rcub/n threads and is also the value
673 used for RCU_BOOST (if enabled). If you are working with a
674 real-time application that has one or more CPU-bound threads
675 running at a real-time priority level, you should set
676 RCU_KTHREAD_PRIO to a priority higher than the highest-priority
677 real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
678 value of 1 is appropriate in the common case, which is real-time
Paul E. McKenneyc9336642012-04-18 16:20:18 -0700679 applications that do not have any CPU-bound threads.
680
681 Some real-time applications might not have a single real-time
682 thread that saturates a given CPU, but instead might have
683 multiple real-time threads that, taken together, fully utilize
Clark Williams21871d72014-09-12 21:21:09 -0500684 that CPU. In this case, you should set RCU_KTHREAD_PRIO to
Paul E. McKenneyc9336642012-04-18 16:20:18 -0700685 a priority higher than the lowest-priority thread that is
686 conspiring to prevent the CPU from running any non-real-time
687 tasks. For example, if one thread at priority 10 and another
688 thread at priority 5 are between themselves fully consuming
Clark Williams21871d72014-09-12 21:21:09 -0500689 the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
Paul E. McKenneyc9336642012-04-18 16:20:18 -0700690 set to priority 6 or higher.
Paul E. McKenney24278d12010-09-27 17:25:23 -0700691
692 Specify the real-time priority, or take the default if unsure.
693
694config RCU_BOOST_DELAY
695 int "Milliseconds to delay boosting after RCU grace-period start"
696 range 0 3000
697 depends on RCU_BOOST
698 default 500
699 help
700 This option specifies the time to wait after the beginning of
701 a given grace period before priority-boosting preempted RCU
702 readers blocking that grace period. Note that any RCU reader
703 blocking an expedited RCU grace period is boosted immediately.
704
705 Accept the default if unsure.
706
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -0700707config RCU_NOCB_CPU
Paul E. McKenney9a5739d2013-03-28 20:48:36 -0700708 bool "Offload RCU callback processing from boot-selected CPUs"
Pranith Kumar28f65692014-09-22 14:00:48 -0400709 depends on TREE_RCU || PREEMPT_RCU
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -0700710 default n
711 help
712 Use this option to reduce OS jitter for aggressive HPC or
713 real-time workloads. It can also be used to offload RCU
714 callback invocation to energy-efficient CPUs in battery-powered
715 asymmetric multiprocessors.
716
717 This option offloads callback invocation from the set of
718 CPUs specified at boot time by the rcu_nocbs parameter.
Paul E. McKenneya4889852012-12-03 08:16:28 -0800719 For each such CPU, a kthread ("rcuox/N") will be created to
720 invoke callbacks, where the "N" is the CPU being offloaded,
721 and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and
722 "s" for RCU-sched. Nothing prevents this kthread from running
723 on the specified CPUs, but (1) the kthreads may be preempted
724 between each callback, and (2) affinity or cgroups can be used
725 to force the kthreads to run on whatever set of CPUs is desired.
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -0700726
Paul E. McKenney34ed62462013-01-07 13:37:42 -0800727 Say Y here if you want to help to debug reduced OS jitter.
Paul E. McKenney3fbfbf72012-08-19 21:35:53 -0700728 Say N here if you are unsure.
729
Paul E. McKenney911af502013-02-11 10:23:27 -0800730choice
731 prompt "Build-forced no-CBs CPUs"
732 default RCU_NOCB_CPU_NONE
Stefan Hengelein45687792014-09-02 19:55:11 +0200733 depends on RCU_NOCB_CPU
Paul E. McKenney911af502013-02-11 10:23:27 -0800734 help
Paul E. McKenney676c3dc2013-04-30 14:49:42 -0700735 This option allows no-CBs CPUs (whose RCU callbacks are invoked
736 from kthreads rather than from softirq context) to be specified
737 at build time. Additional no-CBs CPUs may be specified by
738 the rcu_nocbs= boot parameter.
Paul E. McKenney911af502013-02-11 10:23:27 -0800739
740config RCU_NOCB_CPU_NONE
741 bool "No build_forced no-CBs CPUs"
Paul E. McKenney911af502013-02-11 10:23:27 -0800742 help
743 This option does not force any of the CPUs to be no-CBs CPUs.
744 Only CPUs designated by the rcu_nocbs= boot parameter will be
Paul E. McKenney676c3dc2013-04-30 14:49:42 -0700745 no-CBs CPUs, whose RCU callbacks will be invoked by per-CPU
746 kthreads whose names begin with "rcuo". All other CPUs will
747 invoke their own RCU callbacks in softirq context.
748
749 Select this option if you want to choose no-CBs CPUs at
750 boot time, for example, to allow testing of different no-CBs
751 configurations without having to rebuild the kernel each time.
Paul E. McKenney911af502013-02-11 10:23:27 -0800752
753config RCU_NOCB_CPU_ZERO
754 bool "CPU 0 is a build_forced no-CBs CPU"
Paul E. McKenney911af502013-02-11 10:23:27 -0800755 help
Paul E. McKenney676c3dc2013-04-30 14:49:42 -0700756 This option forces CPU 0 to be a no-CBs CPU, so that its RCU
757 callbacks are invoked by a per-CPU kthread whose name begins
758 with "rcuo". Additional CPUs may be designated as no-CBs
759 CPUs using the rcu_nocbs= boot parameter will be no-CBs CPUs.
760 All other CPUs will invoke their own RCU callbacks in softirq
761 context.
Paul E. McKenney911af502013-02-11 10:23:27 -0800762
763 Select this if CPU 0 needs to be a no-CBs CPU for real-time
Paul E. McKenney676c3dc2013-04-30 14:49:42 -0700764 or energy-efficiency reasons, but the real reason it exists
765 is to ensure that randconfig testing covers mixed systems.
Paul E. McKenney911af502013-02-11 10:23:27 -0800766
767config RCU_NOCB_CPU_ALL
768 bool "All CPUs are build_forced no-CBs CPUs"
Paul E. McKenney911af502013-02-11 10:23:27 -0800769 help
770 This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs=
Paul E. McKenney676c3dc2013-04-30 14:49:42 -0700771 boot parameter will be ignored. All CPUs' RCU callbacks will
772 be executed in the context of per-CPU rcuo kthreads created for
773 this purpose. Assuming that the kthreads whose names start with
774 "rcuo" are bound to "housekeeping" CPUs, this reduces OS jitter
775 on the remaining CPUs, but might decrease memory locality during
776 RCU-callback invocation, thus potentially degrading throughput.
Paul E. McKenney911af502013-02-11 10:23:27 -0800777
778 Select this if all CPUs need to be no-CBs CPUs for real-time
779 or energy-efficiency reasons.
780
781endchoice
782
Paul E. McKenneyee425712015-02-19 10:51:32 -0800783config RCU_EXPEDITE_BOOT
784 bool
785 default n
786 help
787 This option enables expedited grace periods at boot time,
788 as if rcu_expedite_gp() had been invoked early in boot.
789 The corresponding rcu_unexpedite_gp() is invoked from
790 rcu_end_inkernel_boot(), which is intended to be invoked
791 at the end of the kernel-only boot sequence, just before
792 init is exec'ed.
793
794 Accept the default if unsure.
795
Mike Travisc903ff82009-01-15 12:28:29 -0800796endmenu # "RCU Subsystem"
797
Vivek Goyalde5b56b2014-08-08 14:25:41 -0700798config BUILD_BIN2C
799 bool
800 default n
801
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802config IKCONFIG
Ross Birof2443ab2006-09-30 23:27:25 -0700803 tristate "Kernel .config support"
Vivek Goyalde5b56b2014-08-08 14:25:41 -0700804 select BUILD_BIN2C
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805 ---help---
806 This option enables the complete Linux kernel ".config" file
807 contents to be saved in the kernel. It provides documentation
808 of which kernel options are used in a running kernel or in an
809 on-disk kernel. This information can be extracted from the kernel
810 image file with the script scripts/extract-ikconfig and used as
811 input to rebuild the current kernel or to build another kernel.
812 It can also be extracted from a running kernel by reading
813 /proc/config.gz if enabled (below).
814
815config IKCONFIG_PROC
816 bool "Enable access to .config through /proc/config.gz"
817 depends on IKCONFIG && PROC_FS
818 ---help---
819 This option enables access to the kernel configuration file
820 through /proc/config.gz.
821
Alistair John Strachan794543a2007-05-08 00:31:15 -0700822config LOG_BUF_SHIFT
823 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
Ingo Molnarfb39f982015-07-01 10:19:11 +0200824 range 12 25
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700825 default 17
Josh Triplett361e9df2014-10-03 16:00:54 -0700826 depends on PRINTK
Alistair John Strachan794543a2007-05-08 00:31:15 -0700827 help
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700828 Select the minimal kernel log buffer size as a power of 2.
829 The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
830 parameter, see below. Any higher size also might be forced
831 by "log_buf_len" boot parameter.
832
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700833 Examples:
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700834 17 => 128 KB
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700835 16 => 64 KB
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700836 15 => 32 KB
837 14 => 16 KB
Alistair John Strachan794543a2007-05-08 00:31:15 -0700838 13 => 8 KB
839 12 => 4 KB
840
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700841config LOG_CPU_MAX_BUF_SHIFT
842 int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
Geert Uytterhoeven2240a312014-10-13 15:51:11 -0700843 depends on SMP
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700844 range 0 21
845 default 12 if !BASE_SMALL
846 default 0 if BASE_SMALL
Josh Triplett361e9df2014-10-03 16:00:54 -0700847 depends on PRINTK
Luis R. Rodriguez23b28992014-08-06 16:08:56 -0700848 help
849 This option allows to increase the default ring buffer size
850 according to the number of CPUs. The value defines the contribution
851 of each CPU as a power of 2. The used space is typically only few
852 lines however it might be much more when problems are reported,
853 e.g. backtraces.
854
855 The increased size means that a new buffer has to be allocated and
856 the original static one is unused. It makes sense only on systems
857 with more CPUs. Therefore this value is used only when the sum of
858 contributions is greater than the half of the default kernel ring
859 buffer as defined by LOG_BUF_SHIFT. The default values are set
860 so that more than 64 CPUs are needed to trigger the allocation.
861
862 Also this option is ignored when "log_buf_len" kernel parameter is
863 used as it forces an exact (power of two) size of the ring buffer.
864
865 The number of possible CPUs is used for this computation ignoring
866 hotplugging making the compuation optimal for the the worst case
867 scenerio while allowing a simple algorithm to be used from bootup.
868
869 Examples shift values and their meaning:
870 17 => 128 KB for each CPU
871 16 => 64 KB for each CPU
872 15 => 32 KB for each CPU
873 14 => 16 KB for each CPU
874 13 => 8 KB for each CPU
875 12 => 4 KB for each CPU
876
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800877#
878# Architectures with an unreliable sched_clock() should select this:
879#
880config HAVE_UNSTABLE_SCHED_CLOCK
881 bool
882
Stephen Boyd38ff87f2013-06-01 23:39:40 -0700883config GENERIC_SCHED_CLOCK
884 bool
885
Andrea Arcangelibe3a7282012-10-04 01:50:47 +0200886#
887# For architectures that want to enable the support for NUMA-affine scheduler
888# balancing logic:
889#
890config ARCH_SUPPORTS_NUMA_BALANCING
891 bool
892
Peter Zijlstrabe5e6102013-11-18 18:27:06 +0100893#
894# For architectures that know their GCC __int128 support is sound
895#
896config ARCH_SUPPORTS_INT128
897 bool
898
Andrea Arcangelibe3a7282012-10-04 01:50:47 +0200899# For architectures that (ab)use NUMA to represent different memory regions
900# all cpu-local but of different latencies, such as SuperH.
901#
902config ARCH_WANT_NUMA_VARIABLE_LOCALITY
903 bool
904
Andrea Arcangelibe3a7282012-10-04 01:50:47 +0200905config NUMA_BALANCING
906 bool "Memory placement aware NUMA scheduler"
Andrea Arcangelibe3a7282012-10-04 01:50:47 +0200907 depends on ARCH_SUPPORTS_NUMA_BALANCING
908 depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
909 depends on SMP && NUMA && MIGRATION
910 help
911 This option adds support for automatic NUMA aware memory/task placement.
912 The mechanism is quite primitive and is based on migrating memory when
Paul Gortmaker6d56a412013-08-13 11:06:50 -0400913 it has references to the node the task is running on.
Andrea Arcangelibe3a7282012-10-04 01:50:47 +0200914
915 This system will be inactive on UMA systems.
916
Aneesh Kumar K.V6f7c97e2014-12-10 15:43:37 -0800917config NUMA_BALANCING_DEFAULT_ENABLED
918 bool "Automatically enable NUMA aware memory/task placement"
919 default y
920 depends on NUMA_BALANCING
921 help
922 If set, automatic NUMA balancing will be enabled if running on a NUMA
923 machine.
924
Li Zefan23964d22009-01-15 13:50:58 -0800925menuconfig CGROUPS
Christoph Jaeger6341e622014-12-20 15:41:11 -0500926 bool "Control Group support"
Tejun Heo2bd59d42014-02-11 11:52:49 -0500927 select KERNFS
Tejun Heod59cfc02015-05-13 16:35:17 -0400928 select PERCPU_RWSEM
Paul Menageddbcc7e2007-10-18 23:39:30 -0700929 help
Li Zefan23964d22009-01-15 13:50:58 -0800930 This option adds support for grouping sets of processes together, for
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800931 use with process control subsystems such as Cpusets, CFS, memory
932 controls or device isolation.
933 See
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800934 - Documentation/scheduler/sched-design-CFS.txt (CFS)
Li Zefan45ce80f2009-01-15 13:50:59 -0800935 - Documentation/cgroups/ (features for grouping, isolation
936 and resource control)
Paul Menageddbcc7e2007-10-18 23:39:30 -0700937
938 Say N if unsure.
939
Li Zefan23964d22009-01-15 13:50:58 -0800940if CGROUPS
941
Paul Menage006cb992007-10-18 23:39:43 -0700942config CGROUP_DEBUG
943 bool "Example debug cgroup subsystem"
Paul Menage418d7d82008-04-29 01:00:05 -0700944 default n
Paul Menage006cb992007-10-18 23:39:43 -0700945 help
946 This option enables a simple cgroup subsystem that
947 exports useful debugging information about the cgroups
Li Zefan23964d22009-01-15 13:50:58 -0800948 framework.
Paul Menage006cb992007-10-18 23:39:43 -0700949
Li Zefan23964d22009-01-15 13:50:58 -0800950 Say N if unsure.
Paul Menage006cb992007-10-18 23:39:43 -0700951
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700952config CGROUP_FREEZER
Li Zefan23964d22009-01-15 13:50:58 -0800953 bool "Freezer cgroup subsystem"
Li Zefan23964d22009-01-15 13:50:58 -0800954 help
955 Provides a way to freeze and unfreeze all tasks in a
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700956 cgroup.
957
Serge E. Hallyn08ce5f12008-04-29 01:00:10 -0700958config CGROUP_DEVICE
959 bool "Device controller for cgroups"
Serge E. Hallyn08ce5f12008-04-29 01:00:10 -0700960 help
961 Provides a cgroup implementing whitelists for devices which
962 a process in the cgroup can mknod or open.
963
Linus Torvalds1da177e2005-04-16 15:20:36 -0700964config CPUSETS
965 bool "Cpuset support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700966 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700967 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 allow dynamically partitioning a system into sets of CPUs and
969 Memory Nodes and assigning tasks to run only within those sets.
970 This is primarily useful on large SMP or NUMA systems.
971
972 Say N if unsure.
973
Li Zefan23964d22009-01-15 13:50:58 -0800974config PROC_PID_CPUSET
975 bool "Include legacy /proc/<pid>/cpuset file"
976 depends on CPUSETS
977 default y
978
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100979config CGROUP_CPUACCT
980 bool "Simple CPU accounting cgroup subsystem"
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100981 help
982 Provides a simple Resource Controller for monitoring the
Li Zefan23964d22009-01-15 13:50:58 -0800983 total CPU consumed by the tasks in a cgroup.
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100984
Johannes Weiner3e32cb22014-12-10 15:42:31 -0800985config PAGE_COUNTER
986 bool
987
Andrew Mortonc255a452012-07-31 16:43:02 -0700988config MEMCG
Balbir Singh00f0b822008-03-04 14:28:39 -0800989 bool "Memory Resource Controller for Control Groups"
Johannes Weiner3e32cb22014-12-10 15:42:31 -0800990 select PAGE_COUNTER
Tejun Heo79bd9812013-11-22 18:20:42 -0500991 select EVENTFD
Balbir Singh00f0b822008-03-04 14:28:39 -0800992 help
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700993 Provides a memory resource controller that manages both anonymous
Thadeu Lima de Souza Cascardo21acb9c2009-02-04 10:12:08 +0100994 memory and page cache. (See Documentation/cgroups/memory.txt)
Balbir Singh00f0b822008-03-04 14:28:39 -0800995
Andrew Mortonc255a452012-07-31 16:43:02 -0700996config MEMCG_SWAP
KAMEZAWA Hiroyuki65e0e812010-08-10 18:02:56 -0700997 bool "Memory Resource Controller Swap Extension"
Andrew Mortonc255a452012-07-31 16:43:02 -0700998 depends on MEMCG && SWAP
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800999 help
1000 Add swap management feature to memory resource controller. When you
1001 enable this, you can limit mem+swap usage per cgroup. In other words,
1002 when you disable this, memory resource controller has no cares to
1003 usage of swap...a process can exhaust all of the swap. This extension
1004 is useful when you want to avoid exhaustion swap but this itself
1005 adds more overheads and consumes memory for remembering information.
1006 Especially if you use 32bit system or small memory system, please
1007 be careful about enabling this. When memory resource controller
1008 is disabled by boot option, this will be automatically disabled and
1009 there will be no overhead from this. Even when you set this config=y,
WANG Cong00a66d22011-07-25 17:12:12 -07001010 if boot option "swapaccount=0" is set, swap will not be accounted.
KAMEZAWA Hiroyuki627991a2009-04-02 16:57:47 -07001011 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
1012 size is 4096bytes, 512k per 1Gbytes of swap.
Andrew Mortonc255a452012-07-31 16:43:02 -07001013config MEMCG_SWAP_ENABLED
Michal Hockoa42c3902010-11-24 12:57:08 -08001014 bool "Memory Resource Controller Swap Extension enabled by default"
Andrew Mortonc255a452012-07-31 16:43:02 -07001015 depends on MEMCG_SWAP
Michal Hockoa42c3902010-11-24 12:57:08 -08001016 default y
1017 help
1018 Memory Resource Controller Swap Extension comes with its price in
1019 a bigger memory consumption. General purpose distribution kernels
Jim Cromie43d547f2010-12-17 14:32:36 -07001020 which want to enable the feature but keep it disabled by default
Michal Hocko07555ac2013-08-22 16:35:46 -07001021 and let the user enable it by swapaccount=1 boot command line
Michal Hockoa42c3902010-11-24 12:57:08 -08001022 parameter should have this option unselected.
1023 For those who want to have the feature enabled by default should
1024 select this option (if, for some reason, they need to disable it
WANG Cong00a66d22011-07-25 17:12:12 -07001025 then swapaccount=0 does the trick).
Andrew Mortonc255a452012-07-31 16:43:02 -07001026config MEMCG_KMEM
Kees Cook19c92392012-10-02 11:19:29 -07001027 bool "Memory Resource Controller Kernel Memory accounting"
1028 depends on MEMCG
Glauber Costa510fc4e2012-12-18 14:21:47 -08001029 depends on SLUB || SLAB
Glauber Costae5671df2011-12-11 21:47:01 +00001030 help
1031 The Kernel Memory extension for Memory Resource Controller can limit
1032 the amount of memory used by kernel objects in the system. Those are
1033 fundamentally different from the entities handled by the standard
1034 Memory Controller, which are page-based, and can be swapped. Users of
1035 the kmem extension can use it to guarantee that no group of processes
1036 will ever exhaust kernel resources alone.
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -08001037
Aneesh Kumar K.V2bc64a22012-07-31 16:42:12 -07001038config CGROUP_HUGETLB
1039 bool "HugeTLB Resource Controller for Control Groups"
Johannes Weiner71f87bee2014-12-10 15:42:34 -08001040 depends on HUGETLB_PAGE
1041 select PAGE_COUNTER
Aneesh Kumar K.V2bc64a22012-07-31 16:42:12 -07001042 default n
1043 help
1044 Provides a cgroup Resource Controller for HugeTLB pages.
1045 When you enable this, you can put a per cgroup limit on HugeTLB usage.
1046 The limit is enforced during page fault. Since HugeTLB doesn't
1047 support page reclaim, enforcing the limit at page fault time implies
1048 that, the application will get SIGBUS signal if it tries to access
1049 HugeTLB pages beyond its limit. This requires the application to know
1050 beforehand how much HugeTLB pages it would require for its use. The
1051 control group is tracked in the third page lru pointer. This means
1052 that we cannot use the controller with huge page less than 3 pages.
1053
Stephane Eraniane5d13672011-02-14 11:20:01 +02001054config CGROUP_PERF
1055 bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
1056 depends on PERF_EVENTS && CGROUPS
1057 help
1058 This option extends the per-cpu mode to restrict monitoring to
Li Zefan2d0f2522011-03-03 14:26:20 +08001059 threads which belong to the cgroup specified and run on the
Stephane Eraniane5d13672011-02-14 11:20:01 +02001060 designated cpu.
1061
1062 Say N if unsure.
1063
Dhaval Giani7c941432010-01-20 13:26:18 +01001064menuconfig CGROUP_SCHED
1065 bool "Group CPU scheduler"
Dhaval Giani7c941432010-01-20 13:26:18 +01001066 default n
1067 help
1068 This feature lets CPU scheduler recognize task groups and control CPU
1069 bandwidth allocation to such task groups. It uses cgroups to group
1070 tasks.
1071
1072if CGROUP_SCHED
1073config FAIR_GROUP_SCHED
1074 bool "Group scheduling for SCHED_OTHER"
1075 depends on CGROUP_SCHED
1076 default CGROUP_SCHED
1077
Paul Turnerab84d312011-07-21 09:43:28 -07001078config CFS_BANDWIDTH
1079 bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
Paul Turnerab84d312011-07-21 09:43:28 -07001080 depends on FAIR_GROUP_SCHED
1081 default n
1082 help
1083 This option allows users to define CPU bandwidth rates (limits) for
1084 tasks running within the fair group scheduler. Groups with no limit
1085 set are considered to be unconstrained and will run with no
1086 restriction.
1087 See tip/Documentation/scheduler/sched-bwc.txt for more information.
1088
Dhaval Giani7c941432010-01-20 13:26:18 +01001089config RT_GROUP_SCHED
1090 bool "Group scheduling for SCHED_RR/FIFO"
Dhaval Giani7c941432010-01-20 13:26:18 +01001091 depends on CGROUP_SCHED
1092 default n
1093 help
1094 This feature lets you explicitly allocate real CPU bandwidth
Li Zefan32bd7eb2010-03-24 13:17:19 +08001095 to task groups. If enabled, it will also make it impossible to
Dhaval Giani7c941432010-01-20 13:26:18 +01001096 schedule realtime tasks for non-root users until you allocate
1097 realtime bandwidth for them.
1098 See Documentation/scheduler/sched-rt-group.txt for more information.
1099
1100endif #CGROUP_SCHED
1101
Vivek Goyalafc24d42010-04-26 19:27:56 +02001102config BLK_CGROUP
Tejun Heo32e380a2012-03-05 13:14:54 -08001103 bool "Block IO controller"
Daniel Lezcano79ae9c22010-10-27 15:34:39 -07001104 depends on BLOCK
Vivek Goyalafc24d42010-04-26 19:27:56 +02001105 default n
1106 ---help---
1107 Generic block IO controller cgroup interface. This is the common
1108 cgroup interface which should be used by various IO controlling
1109 policies.
1110
1111 Currently, CFQ IO scheduler uses it to recognize task groups and
1112 control disk bandwidth allocation (proportional time slice allocation)
Vivek Goyale43473b2010-09-15 17:06:35 -04001113 to such task groups. It is also used by bio throttling logic in
1114 block layer to implement upper limit in IO rates on a device.
Vivek Goyalafc24d42010-04-26 19:27:56 +02001115
1116 This option only enables generic Block IO controller infrastructure.
Vivek Goyale43473b2010-09-15 17:06:35 -04001117 One needs to also enable actual IO controlling logic/policy. For
Michael Witten79e2e752011-01-16 21:43:10 +00001118 enabling proportional weight division of disk bandwidth in CFQ, set
1119 CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
Michael Wittenc5e05912011-01-17 00:08:41 +00001120 CONFIG_BLK_DEV_THROTTLING=y.
Vivek Goyalafc24d42010-04-26 19:27:56 +02001121
1122 See Documentation/cgroups/blkio-controller.txt for more information.
1123
1124config DEBUG_BLK_CGROUP
1125 bool "Enable Block IO controller debugging"
1126 depends on BLK_CGROUP
1127 default n
1128 ---help---
1129 Enable some debugging help. Currently it exports additional stat
1130 files in a cgroup which can be useful for debugging.
1131
Tejun Heo89e9b9e2015-05-22 17:13:36 -04001132config CGROUP_WRITEBACK
1133 bool
1134 depends on MEMCG && BLK_CGROUP
1135 default y
1136
Li Zefan23964d22009-01-15 13:50:58 -08001137endif # CGROUPS
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -08001138
Cyrill Gorcunov067bce12012-01-12 17:20:49 -08001139config CHECKPOINT_RESTORE
1140 bool "Checkpoint/restore support" if EXPERT
Iago López Galeiras2e13ba52015-06-25 15:00:57 -07001141 select PROC_CHILDREN
Cyrill Gorcunov067bce12012-01-12 17:20:49 -08001142 default n
1143 help
1144 Enables additional kernel features in a sake of checkpoint/restore.
1145 In particular it adds auxiliary prctl codes to setup process text,
1146 data and heap segment sizes, and a few additional /proc filesystem
1147 entries.
1148
1149 If unsure, say N here.
1150
Daniel Lezcano8dd2a822010-10-27 15:34:38 -07001151menuconfig NAMESPACES
David Rientjes6a108a12011-01-20 14:44:16 -08001152 bool "Namespaces support" if EXPERT
Iulia Manda28138932015-04-15 16:16:41 -07001153 depends on MULTIUSER
David Rientjes6a108a12011-01-20 14:44:16 -08001154 default !EXPERT
Pavel Emelyanovc5289a62008-02-08 04:18:19 -08001155 help
1156 Provides the way to make tasks work with different objects using
1157 the same id. For example same IPC id may refer to different objects
1158 or same user id or pid may refer to different tasks when used in
1159 different namespaces.
1160
Daniel Lezcano8dd2a822010-10-27 15:34:38 -07001161if NAMESPACES
1162
Pavel Emelyanov58bfdd6d2008-02-08 04:18:21 -08001163config UTS_NS
1164 bool "UTS namespace"
Daniel Lezcano17a6d442010-10-27 15:34:37 -07001165 default y
Pavel Emelyanov58bfdd6d2008-02-08 04:18:21 -08001166 help
1167 In this namespace tasks see different info provided with the
1168 uname() system call
1169
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -08001170config IPC_NS
1171 bool "IPC namespace"
Daniel Lezcano8dd2a822010-10-27 15:34:38 -07001172 depends on (SYSVIPC || POSIX_MQUEUE)
Daniel Lezcano17a6d442010-10-27 15:34:37 -07001173 default y
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -08001174 help
1175 In this namespace tasks work with IPC ids which correspond to
Serge E. Hallyn614b84c2009-04-06 19:01:08 -07001176 different IPC objects in different namespaces.
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -08001177
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -08001178config USER_NS
Kees Cook19c92392012-10-02 11:19:29 -07001179 bool "User namespace"
Eric W. Biederman5673a942011-11-17 10:23:55 -08001180 default n
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -08001181 help
1182 This allows containers, i.e. vservers, to use user namespaces
1183 to provide different user info for different servers.
Eric W. Biedermane11f0ae2013-01-25 16:48:31 -08001184
1185 When user namespaces are enabled in the kernel it is
1186 recommended that the MEMCG and MEMCG_KMEM options also be
1187 enabled and that user-space use the memory control groups to
1188 limit the amount of memory a memory unprivileged users can
1189 use.
1190
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -08001191 If unsure, say N.
1192
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -08001193config PID_NS
Daniel Lezcano9bd38c22010-10-27 15:34:37 -07001194 bool "PID Namespaces"
Daniel Lezcano17a6d442010-10-27 15:34:37 -07001195 default y
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -08001196 help
Heikki Orsila12d2b8f2008-07-06 15:48:02 +03001197 Support process id namespaces. This allows having multiple
Matt LaPlante692105b2009-01-26 11:12:25 +01001198 processes with the same pid as long as they are in different
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -08001199 pid namespaces. This is a building block of containers.
1200
Matt Helsleyd6eb6332009-01-26 12:25:55 -08001201config NET_NS
1202 bool "Network namespace"
Daniel Lezcano8dd2a822010-10-27 15:34:38 -07001203 depends on NET
Daniel Lezcano17a6d442010-10-27 15:34:37 -07001204 default y
Matt Helsleyd6eb6332009-01-26 12:25:55 -08001205 help
1206 Allow user space to create what appear to be multiple instances
1207 of the network stack.
1208
Daniel Lezcano8dd2a822010-10-27 15:34:38 -07001209endif # NAMESPACES
1210
Mike Galbraith5091faa2010-11-30 14:18:03 +01001211config SCHED_AUTOGROUP
1212 bool "Automatic process group scheduling"
Mike Galbraith5091faa2010-11-30 14:18:03 +01001213 select CGROUPS
1214 select CGROUP_SCHED
1215 select FAIR_GROUP_SCHED
1216 help
1217 This option optimizes the scheduler for common desktop workloads by
1218 automatically creating and populating task groups. This separation
1219 of workloads isolates aggressive CPU burners (like build jobs) from
1220 desktop applications. Task group autogeneration is currently based
1221 upon task session.
1222
Daniel Lezcano7af37be2010-10-27 15:34:41 -07001223config SYSFS_DEPRECATED
Ferenc Wagner5d6a4ea2011-01-10 19:04:22 +01001224 bool "Enable deprecated sysfs features to support old userspace tools"
Daniel Lezcano7af37be2010-10-27 15:34:41 -07001225 depends on SYSFS
1226 default n
1227 help
1228 This option adds code that switches the layout of the "block" class
1229 devices, to not show up in /sys/class/block/, but only in
1230 /sys/block/.
1231
1232 This switch is only active when the sysfs.deprecated=1 boot option is
1233 passed or the SYSFS_DEPRECATED_V2 option is set.
1234
1235 This option allows new kernels to run on old distributions and tools,
1236 which might get confused by /sys/class/block/. Since 2007/2008 all
1237 major distributions and tools handle this just fine.
1238
1239 Recent distributions and userspace tools after 2009/2010 depend on
1240 the existence of /sys/class/block/, and will not work with this
1241 option enabled.
1242
1243 Only if you are using a new kernel on an old distribution, you might
1244 need to say Y here.
1245
1246config SYSFS_DEPRECATED_V2
Ferenc Wagner5d6a4ea2011-01-10 19:04:22 +01001247 bool "Enable deprecated sysfs features by default"
Daniel Lezcano7af37be2010-10-27 15:34:41 -07001248 default n
1249 depends on SYSFS
1250 depends on SYSFS_DEPRECATED
1251 help
1252 Enable deprecated sysfs by default.
1253
1254 See the CONFIG_SYSFS_DEPRECATED option for more details about this
1255 option.
1256
1257 Only if you are using a new kernel on an old distribution, you might
1258 need to say Y here. Even then, odds are you would not need it
1259 enabled, you can always pass the boot option if absolutely necessary.
1260
1261config RELAY
1262 bool "Kernel->user space relay support (formerly relayfs)"
1263 help
1264 This option enables support for relay interface support in
1265 certain file systems (such as debugfs).
1266 It is designed to provide an efficient mechanism for tools and
1267 facilities to relay large amounts of data from kernel space to
1268 user space.
1269
1270 If unsure, say N.
1271
Dimitri Gorokhovikf9916332007-03-06 01:42:17 -08001272config BLK_DEV_INITRD
1273 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
1274 depends on BROKEN || !FRV
1275 help
1276 The initial RAM filesystem is a ramfs which is loaded by the
1277 boot loader (loadlin or lilo) and that is mounted as root
1278 before the normal boot procedure. It is typically used to
1279 load modules needed to mount the "real" root file system,
1280 etc. See <file:Documentation/initrd.txt> for details.
1281
1282 If RAM disk support (BLK_DEV_RAM) is also included, this
1283 also enables initial RAM disk (initrd) support and adds
1284 15 Kbytes (more on some other architectures) to the kernel size.
1285
1286 If unsure say Y.
1287
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -08001288if BLK_DEV_INITRD
1289
Sam Ravnborgdbec4862005-08-10 20:44:50 +02001290source "usr/Kconfig"
1291
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -08001292endif
1293
Linus Torvaldsc45b4f12005-12-14 18:52:21 -08001294config CC_OPTIMIZE_FOR_SIZE
Ingo Molnar96fffeb2008-04-28 01:39:43 +02001295 bool "Optimize for size"
Linus Torvaldsc45b4f12005-12-14 18:52:21 -08001296 help
Masahiro Yamada31a4af72014-08-05 14:43:07 +09001297 Enabling this option will pass "-Os" instead of "-O2" to
1298 your compiler resulting in a smaller kernel.
Linus Torvaldsc45b4f12005-12-14 18:52:21 -08001299
Kirill Smelkov3a55fb02012-11-02 15:41:01 +04001300 If unsure, say N.
Linus Torvaldsc45b4f12005-12-14 18:52:21 -08001301
Randy Dunlap08470622006-09-30 23:28:13 -07001302config SYSCTL
1303 bool
1304
Randy Dunlapb943c462009-03-10 12:55:46 -07001305config ANON_INODES
1306 bool
1307
Mike Frysinger657a5202013-04-30 15:28:45 -07001308config HAVE_UID16
1309 bool
1310
1311config SYSCTL_EXCEPTION_TRACE
1312 bool
1313 help
1314 Enable support for /proc/sys/debug/exception-trace.
1315
1316config SYSCTL_ARCH_UNALIGN_NO_WARN
1317 bool
1318 help
1319 Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
1320 Allows arch to define/use @no_unaligned_warning to possibly warn
1321 about unaligned access emulation going on under the hood.
1322
1323config SYSCTL_ARCH_UNALIGN_ALLOW
1324 bool
1325 help
1326 Enable support for /proc/sys/kernel/unaligned-trap
1327 Allows arches to define/use @unaligned_enabled to runtime toggle
1328 the unaligned access emulation.
1329 see arch/parisc/kernel/unaligned.c for reference
1330
Mike Frysinger657a5202013-04-30 15:28:45 -07001331config HAVE_PCSPKR_PLATFORM
1332 bool
1333
Alexei Starovoitovf89b7752014-10-23 18:41:08 -07001334# interpreter that classic socket filters depend on
1335config BPF
1336 bool
1337
David Rientjes6a108a12011-01-20 14:44:16 -08001338menuconfig EXPERT
1339 bool "Configure standard kernel features (expert users)"
Josh Triplettf505c552011-06-05 18:23:58 -07001340 # Unhide debug options, to make the on-by-default options visible
1341 select DEBUG_KERNEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001342 help
1343 This option allows certain base kernel options and settings
1344 to be disabled or tweaked. This is for specialized
1345 environments which can tolerate a "non-standard" kernel.
1346 Only use this if you really know what you are doing.
1347
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001348config UID16
David Rientjes6a108a12011-01-20 14:44:16 -08001349 bool "Enable 16-bit UID system calls" if EXPERT
Iulia Manda28138932015-04-15 16:16:41 -07001350 depends on HAVE_UID16 && MULTIUSER
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001351 default y
1352 help
1353 This enables the legacy 16-bit UID syscall wrappers.
1354
Iulia Manda28138932015-04-15 16:16:41 -07001355config MULTIUSER
1356 bool "Multiple users, groups and capabilities support" if EXPERT
1357 default y
1358 help
1359 This option enables support for non-root users, groups and
1360 capabilities.
1361
1362 If you say N here, all processes will run with UID 0, GID 0, and all
1363 possible capabilities. Saying N here also compiles out support for
1364 system calls related to UIDs, GIDs, and capabilities, such as setuid,
1365 setgid, and capset.
1366
1367 If unsure, say Y here.
1368
Fabian Frederickf6187762014-06-04 16:11:12 -07001369config SGETMASK_SYSCALL
1370 bool "sgetmask/ssetmask syscalls support" if EXPERT
1371 def_bool PARISC || MN10300 || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
1372 ---help---
1373 sys_sgetmask and sys_ssetmask are obsolete system calls
1374 no longer supported in libc but still enabled by default in some
1375 architectures.
1376
1377 If unsure, leave the default option here.
1378
Fabian Frederick6af9f7b2014-04-03 14:48:25 -07001379config SYSFS_SYSCALL
1380 bool "Sysfs syscall support" if EXPERT
1381 default y
1382 ---help---
1383 sys_sysfs is an obsolete system call no longer supported in libc.
1384 Note that disabling this option is more secure but might break
1385 compatibility with some systems.
1386
1387 If unsure say Y here.
1388
Eric W. Biedermanb89a8172006-09-27 01:51:04 -07001389config SYSCTL_SYSCALL
David Rientjes6a108a12011-01-20 14:44:16 -08001390 bool "Sysctl syscall support" if EXPERT
Eric W. Biederman26a70342009-11-05 05:26:41 -08001391 depends on PROC_SYSCTL
WANG Congc736de62011-11-02 13:39:25 -07001392 default n
Eric W. Biedermanb89a8172006-09-27 01:51:04 -07001393 select SYSCTL
1394 ---help---
Eric W. Biederman13bb7e32006-11-08 17:44:51 -08001395 sys_sysctl uses binary paths that have been found challenging
1396 to properly maintain and use. The interface in /proc/sys
1397 using paths with ascii names is now the primary path to this
1398 information.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -07001399
Eric W. Biederman13bb7e32006-11-08 17:44:51 -08001400 Almost nothing using the binary sysctl interface so if you are
1401 trying to save some space it is probably safe to disable this,
1402 making your kernel marginally smaller.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -07001403
WANG Congc736de62011-11-02 13:39:25 -07001404 If unsure say N here.
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001405
Linus Torvalds1da177e2005-04-16 15:20:36 -07001406config KALLSYMS
David Rientjes6a108a12011-01-20 14:44:16 -08001407 bool "Load all symbols for debugging/ksymoops" if EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 default y
1409 help
1410 Say Y here to let the kernel print out symbolic crash information and
1411 symbolic stack backtraces. This increases the size of the kernel
1412 somewhat, as all symbols have to be loaded into the kernel image.
1413
1414config KALLSYMS_ALL
1415 bool "Include all symbols in kallsyms"
1416 depends on DEBUG_KERNEL && KALLSYMS
1417 help
Artem Bityutskiy71a83ec2011-04-05 13:24:57 +03001418 Normally kallsyms only contains the symbols of functions for nicer
1419 OOPS messages and backtraces (i.e., symbols from the text and inittext
1420 sections). This is sufficient for most cases. And only in very rare
1421 cases (e.g., when a debugger is used) all symbols are required (e.g.,
1422 names of variables from the data sections, etc).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001423
Artem Bityutskiy71a83ec2011-04-05 13:24:57 +03001424 This option makes sure that all symbols are loaded into the kernel
1425 image (i.e., symbols from all sections) in cost of increased kernel
1426 size (depending on the kernel configuration, it may be 300KiB or
1427 something like this).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428
Artem Bityutskiy71a83ec2011-04-05 13:24:57 +03001429 Say N unless you really need all symbols.
Matt Mackalld59745c2005-05-01 08:59:02 -07001430
1431config PRINTK
1432 default y
David Rientjes6a108a12011-01-20 14:44:16 -08001433 bool "Enable support for printk" if EXPERT
Frederic Weisbecker74876a92012-10-12 18:00:23 +02001434 select IRQ_WORK
Matt Mackalld59745c2005-05-01 08:59:02 -07001435 help
1436 This option enables normal printk support. Removing it
1437 eliminates most of the message strings from the kernel image
1438 and makes the kernel more or less silent. As this makes it
1439 very difficult to diagnose system problems, saying N here is
1440 strongly discouraged.
1441
Matt Mackallc8538a72005-05-01 08:59:01 -07001442config BUG
David Rientjes6a108a12011-01-20 14:44:16 -08001443 bool "BUG() support" if EXPERT
Matt Mackallc8538a72005-05-01 08:59:01 -07001444 default y
1445 help
1446 Disabling this option eliminates support for BUG and WARN, reducing
1447 the size of your kernel image and potentially quietly ignoring
1448 numerous fatal conditions. You should only consider disabling this
1449 option for embedded systems with no facilities for reporting errors.
1450 Just say Y.
1451
Matt Mackall708e9a72006-01-08 01:05:25 -08001452config ELF_CORE
Alex Kelly046d6622012-10-04 17:15:23 -07001453 depends on COREDUMP
Matt Mackall708e9a72006-01-08 01:05:25 -08001454 default y
David Rientjes6a108a12011-01-20 14:44:16 -08001455 bool "Enable ELF core dumps" if EXPERT
Matt Mackall708e9a72006-01-08 01:05:25 -08001456 help
1457 Enable support for generating core dumps. Disabling saves about 4k.
1458
Ralf Baechle8761f1a2011-06-01 19:05:09 +01001459
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +02001460config PCSPKR_PLATFORM
David Rientjes6a108a12011-01-20 14:44:16 -08001461 bool "Enable PC-Speaker support" if EXPERT
Ralf Baechle8761f1a2011-06-01 19:05:09 +01001462 depends on HAVE_PCSPKR_PLATFORM
Ralf Baechle15f304b2011-06-01 19:04:59 +01001463 select I8253_LOCK
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +02001464 default y
1465 help
1466 This option allows to disable the internal PC-Speaker
1467 support, saving some memory.
1468
Linus Torvalds1da177e2005-04-16 15:20:36 -07001469config BASE_FULL
1470 default y
David Rientjes6a108a12011-01-20 14:44:16 -08001471 bool "Enable full-sized data structures for core" if EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001472 help
1473 Disabling this option reduces the size of miscellaneous core
1474 kernel data structures. This saves memory on small machines,
1475 but may reduce performance.
1476
1477config FUTEX
David Rientjes6a108a12011-01-20 14:44:16 -08001478 bool "Enable futex support" if EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 default y
Ingo Molnar23f78d4a2006-06-27 02:54:53 -07001480 select RT_MUTEXES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001481 help
1482 Disabling this option will cause the kernel to be built without
1483 support for "fast userspace mutexes". The resulting kernel may not
1484 run glibc-based applications correctly.
1485
Heiko Carstens03b8c7b2014-03-02 13:09:47 +01001486config HAVE_FUTEX_CMPXCHG
1487 bool
Josh Triplett62b4d202014-10-03 16:19:24 -07001488 depends on FUTEX
Heiko Carstens03b8c7b2014-03-02 13:09:47 +01001489 help
1490 Architectures should select this if futex_atomic_cmpxchg_inatomic()
1491 is implemented and always working. This removes a couple of runtime
1492 checks.
1493
Linus Torvalds1da177e2005-04-16 15:20:36 -07001494config EPOLL
David Rientjes6a108a12011-01-20 14:44:16 -08001495 bool "Enable eventpoll support" if EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001496 default y
Adrian Bunk448e3ce2007-07-31 00:39:10 -07001497 select ANON_INODES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001498 help
1499 Disabling this option will cause the kernel to be built without
1500 support for epoll family of system calls.
1501
Davide Libenzifba2afa2007-05-10 22:23:13 -07001502config SIGNALFD
David Rientjes6a108a12011-01-20 14:44:16 -08001503 bool "Enable signalfd() system call" if EXPERT
Adrian Bunk448e3ce2007-07-31 00:39:10 -07001504 select ANON_INODES
Davide Libenzifba2afa2007-05-10 22:23:13 -07001505 default y
1506 help
1507 Enable the signalfd() system call that allows to receive signals
1508 on a file descriptor.
1509
1510 If unsure, say Y.
1511
Davide Libenzib215e282007-05-10 22:23:16 -07001512config TIMERFD
David Rientjes6a108a12011-01-20 14:44:16 -08001513 bool "Enable timerfd() system call" if EXPERT
Adrian Bunk448e3ce2007-07-31 00:39:10 -07001514 select ANON_INODES
Davide Libenzib215e282007-05-10 22:23:16 -07001515 default y
1516 help
1517 Enable the timerfd() system call that allows to receive timer
1518 events on a file descriptor.
1519
1520 If unsure, say Y.
1521
Davide Libenzie1ad7462007-05-10 22:23:19 -07001522config EVENTFD
David Rientjes6a108a12011-01-20 14:44:16 -08001523 bool "Enable eventfd() system call" if EXPERT
Adrian Bunk448e3ce2007-07-31 00:39:10 -07001524 select ANON_INODES
Davide Libenzie1ad7462007-05-10 22:23:19 -07001525 default y
1526 help
1527 Enable the eventfd() system call that allows to receive both
1528 kernel notification (ie. KAIO) or userspace notifications.
1529
1530 If unsure, say Y.
1531
Alexei Starovoitovf89b7752014-10-23 18:41:08 -07001532# syscall, maps, verifier
1533config BPF_SYSCALL
Ingo Molnare1abf2c2015-04-02 15:51:39 +02001534 bool "Enable bpf() system call"
Alexei Starovoitovf89b7752014-10-23 18:41:08 -07001535 select ANON_INODES
1536 select BPF
1537 default n
1538 help
1539 Enable the bpf() system call that allows to manipulate eBPF
1540 programs and maps via file descriptors.
1541
Linus Torvalds1da177e2005-04-16 15:20:36 -07001542config SHMEM
David Rientjes6a108a12011-01-20 14:44:16 -08001543 bool "Use full shmem filesystem" if EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001544 default y
1545 depends on MMU
1546 help
1547 The shmem is an internal filesystem used to manage shared memory.
1548 It is backed by swap and manages resource limits. It is also exported
1549 to userspace as tmpfs if TMPFS is enabled. Disabling this
1550 option replaces shmem and tmpfs with the much simpler ramfs code,
1551 which may be appropriate on small systems without swap.
1552
Thomas Petazzoniebf3f092008-10-15 22:05:12 -07001553config AIO
David Rientjes6a108a12011-01-20 14:44:16 -08001554 bool "Enable AIO support" if EXPERT
Thomas Petazzoniebf3f092008-10-15 22:05:12 -07001555 default y
1556 help
1557 This option enables POSIX asynchronous I/O which may by used
Mike Frysinger657a5202013-04-30 15:28:45 -07001558 by some high performance threaded applications. Disabling
1559 this option saves about 7k.
1560
Josh Triplettd3ac21c2014-08-17 19:41:09 -05001561config ADVISE_SYSCALLS
1562 bool "Enable madvise/fadvise syscalls" if EXPERT
1563 default y
1564 help
1565 This option enables the madvise and fadvise syscalls, used by
1566 applications to advise the kernel about their future memory or file
1567 usage, improving performance. If building an embedded system where no
1568 applications use these syscalls, you can disable this option to save
1569 space.
1570
Mike Frysinger657a5202013-04-30 15:28:45 -07001571config PCI_QUIRKS
1572 default y
1573 bool "Enable PCI quirk workarounds" if EXPERT
1574 depends on PCI
1575 help
1576 This enables workarounds for various PCI chipset
1577 bugs/quirks. Disable this only if your target machine is
1578 unaffected by PCI quirks.
Thomas Petazzoniebf3f092008-10-15 22:05:12 -07001579
Randy Dunlap6befe5f2011-04-26 12:33:21 -07001580config EMBEDDED
1581 bool "Embedded system"
Josh Triplett5d2acfc2014-04-07 15:39:09 -07001582 option allnoconfig_y
Randy Dunlap6befe5f2011-04-26 12:33:21 -07001583 select EXPERT
1584 help
1585 This option should be enabled if compiling the kernel for
1586 an embedded system so certain expert options are available
1587 for configuration.
1588
Ingo Molnarcdd6c482009-09-21 12:02:48 +02001589config HAVE_PERF_EVENTS
Thomas Gleixner0793a612008-12-04 20:12:29 +01001590 bool
Mike Frysinger018df722009-06-12 13:17:43 -04001591 help
1592 See tools/perf/design.txt for details.
Thomas Gleixner0793a612008-12-04 20:12:29 +01001593
Peter Zijlstra906010b2009-09-21 16:08:49 +02001594config PERF_USE_VMALLOC
1595 bool
1596 help
1597 See tools/perf/design.txt for details
1598
Ingo Molnar57c0c152009-09-21 12:20:38 +02001599menu "Kernel Performance Events And Counters"
Thomas Gleixner0793a612008-12-04 20:12:29 +01001600
Ingo Molnarcdd6c482009-09-21 12:02:48 +02001601config PERF_EVENTS
Ingo Molnar57c0c152009-09-21 12:20:38 +02001602 bool "Kernel performance events and counters"
Robert Richter392d65a2012-04-05 18:24:44 +02001603 default y if PROFILING
Ingo Molnarcdd6c482009-09-21 12:02:48 +02001604 depends on HAVE_PERF_EVENTS
Ingo Molnar4c59e462008-12-08 19:38:33 +01001605 select ANON_INODES
Peter Zijlstrae360adb2010-10-14 14:01:34 +08001606 select IRQ_WORK
Pranith Kumar83fe27e2014-12-05 11:24:45 -05001607 select SRCU
Thomas Gleixner0793a612008-12-04 20:12:29 +01001608 help
Ingo Molnar57c0c152009-09-21 12:20:38 +02001609 Enable kernel support for various performance events provided
1610 by software and hardware.
Thomas Gleixner0793a612008-12-04 20:12:29 +01001611
Thadeu Lima de Souza Cascardodd770382009-10-30 19:32:25 -02001612 Software events are supported either built-in or via the
Ingo Molnar57c0c152009-09-21 12:20:38 +02001613 use of generic tracepoints.
1614
1615 Most modern CPUs support performance events via performance
1616 counter registers. These registers count the number of certain
Thomas Gleixner0793a612008-12-04 20:12:29 +01001617 types of hw events: such as instructions executed, cachemisses
1618 suffered, or branches mis-predicted - without slowing down the
1619 kernel or applications. These registers can also trigger interrupts
1620 when a threshold number of events have passed - and can thus be
1621 used to profile the code that runs on that CPU.
1622
Ingo Molnar57c0c152009-09-21 12:20:38 +02001623 The Linux Performance Event subsystem provides an abstraction of
Thadeu Lima de Souza Cascardodd770382009-10-30 19:32:25 -02001624 these software and hardware event capabilities, available via a
Ingo Molnar57c0c152009-09-21 12:20:38 +02001625 system call and used by the "perf" utility in tools/perf/. It
Thomas Gleixner0793a612008-12-04 20:12:29 +01001626 provides per task and per CPU counters, and it provides event
1627 capabilities on top of those.
1628
1629 Say Y if unsure.
1630
Peter Zijlstra906010b2009-09-21 16:08:49 +02001631config DEBUG_PERF_USE_VMALLOC
1632 default n
1633 bool "Debug: use vmalloc to back perf mmap() buffers"
Michael Ellermancb307112015-05-04 16:26:39 +10001634 depends on PERF_EVENTS && DEBUG_KERNEL && !PPC
Peter Zijlstra906010b2009-09-21 16:08:49 +02001635 select PERF_USE_VMALLOC
1636 help
1637 Use vmalloc memory to back perf mmap() buffers.
1638
1639 Mostly useful for debugging the vmalloc code on platforms
1640 that don't require it.
1641
1642 Say N if unsure.
1643
Thomas Gleixner0793a612008-12-04 20:12:29 +01001644endmenu
1645
Christoph Lameterf8891e52006-06-30 01:55:45 -07001646config VM_EVENT_COUNTERS
1647 default y
David Rientjes6a108a12011-01-20 14:44:16 -08001648 bool "Enable VM event counters for /proc/vmstat" if EXPERT
Christoph Lameterf8891e52006-06-30 01:55:45 -07001649 help
Paul Jackson2aea4fb2006-12-22 01:06:10 -08001650 VM event counters are needed for event counts to be shown.
1651 This option allows the disabling of the VM event counters
David Rientjes6a108a12011-01-20 14:44:16 -08001652 on EXPERT systems. /proc/vmstat will only show page counts
Paul Jackson2aea4fb2006-12-22 01:06:10 -08001653 if VM event counters are disabled.
Christoph Lameterf8891e52006-06-30 01:55:45 -07001654
Christoph Lameter41ecc552007-05-09 02:32:44 -07001655config SLUB_DEBUG
1656 default y
David Rientjes6a108a12011-01-20 14:44:16 -08001657 bool "Enable SLUB debugging support" if EXPERT
Christoph Lameterf6acb632008-04-29 16:16:06 -07001658 depends on SLUB && SYSFS
Christoph Lameter41ecc552007-05-09 02:32:44 -07001659 help
1660 SLUB has extensive debug support features. Disabling these can
1661 result in significant savings in code size. This also disables
1662 SLUB sysfs support. /sys/slab will not exist and there will be
1663 no support for cache validation etc.
1664
Randy Dunlapb943c462009-03-10 12:55:46 -07001665config COMPAT_BRK
1666 bool "Disable heap randomization"
1667 default y
1668 help
1669 Randomizing heap placement makes heap exploits harder, but it
1670 also breaks ancient binaries (including anything libc5 based).
1671 This option changes the bootup default to heap randomization
Matt LaPlante692105b2009-01-26 11:12:25 +01001672 disabled, and can be overridden at runtime by setting
Randy Dunlapb943c462009-03-10 12:55:46 -07001673 /proc/sys/kernel/randomize_va_space to 2.
1674
1675 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1676
Christoph Lameter81819f02007-05-06 14:49:36 -07001677choice
1678 prompt "Choose SLAB allocator"
Christoph Lametera0acd822007-07-17 04:03:32 -07001679 default SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001680 help
1681 This option allows to select a slab allocator.
1682
1683config SLAB
1684 bool "SLAB"
1685 help
1686 The regular slab allocator that is established and known to work
Christoph Lameter34013882007-05-09 02:32:47 -07001687 well in all environments. It organizes cache hot objects in
Simon Arlott02f56212008-11-05 22:18:19 +00001688 per cpu and per node queues.
Christoph Lameter81819f02007-05-06 14:49:36 -07001689
1690config SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001691 bool "SLUB (Unqueued Allocator)"
1692 help
1693 SLUB is a slab allocator that minimizes cache line usage
1694 instead of managing queues of cached objects (SLAB approach).
1695 Per cpu caching is realized using slabs of objects instead
1696 of queues of objects. SLUB can use memory efficiently
Simon Arlott02f56212008-11-05 22:18:19 +00001697 and has enhanced diagnostics. SLUB is the default choice for
1698 a slab allocator.
Christoph Lameter81819f02007-05-06 14:49:36 -07001699
1700config SLOB
David Rientjes6a108a12011-01-20 14:44:16 -08001701 depends on EXPERT
Christoph Lameter81819f02007-05-06 14:49:36 -07001702 bool "SLOB (Simple Allocator)"
1703 help
Matt Mackall37291452008-02-04 22:29:38 -08001704 SLOB replaces the stock allocator with a drastically simpler
1705 allocator. SLOB is generally more space efficient but
1706 does not perform as well on large systems.
Christoph Lameter81819f02007-05-06 14:49:36 -07001707
1708endchoice
1709
Joonsoo Kim345c9052013-06-19 14:05:52 +09001710config SLUB_CPU_PARTIAL
1711 default y
Uwe Kleine-Königb39ffbf2013-07-17 16:54:59 +02001712 depends on SLUB && SMP
Joonsoo Kim345c9052013-06-19 14:05:52 +09001713 bool "SLUB per cpu partial cache"
1714 help
1715 Per cpu partial caches accellerate objects allocation and freeing
1716 that is local to a processor at the price of more indeterminism
1717 in the latency of the free. On overflow these caches will be cleared
1718 which requires the taking of locks that may cause latency spikes.
1719 Typically one would choose no for a realtime system.
1720
Jie Zhangea637632009-12-14 18:00:02 -08001721config MMAP_ALLOW_UNINITIALIZED
1722 bool "Allow mmapped anonymous memory to be uninitialized"
David Rientjes6a108a12011-01-20 14:44:16 -08001723 depends on EXPERT && !MMU
Jie Zhangea637632009-12-14 18:00:02 -08001724 default n
1725 help
1726 Normally, and according to the Linux spec, anonymous memory obtained
1727 from mmap() has it's contents cleared before it is passed to
1728 userspace. Enabling this config option allows you to request that
1729 mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
1730 providing a huge performance boost. If this option is not enabled,
1731 then the flag will be ignored.
1732
1733 This is taken advantage of by uClibc's malloc(), and also by
1734 ELF-FDPIC binfmt's brk and stack allocator.
1735
1736 Because of the obvious security issues, this option should only be
1737 enabled on embedded devices where you control what is run in
1738 userspace. Since that isn't generally a problem on no-MMU systems,
1739 it is normally safe to say Y here.
1740
1741 See Documentation/nommu-mmap.txt for more information.
1742
Peter Foley82c04ff2014-04-18 15:07:11 -07001743config SYSTEM_TRUSTED_KEYRING
1744 bool "Provide system-wide ring of trusted keys"
1745 depends on KEYS
1746 help
1747 Provide a system keyring to which trusted keys can be added. Keys in
1748 the keyring are considered to be trusted. Keys may be added at will
1749 by the kernel from compiled-in data and from hardware key stores, but
1750 userspace may only add extra keys if those keys can be verified by
1751 keys already in the keyring.
1752
1753 Keys in this keyring are used by module signature checking.
1754
David Howells091f6e22015-07-20 21:16:28 +01001755config SYSTEM_DATA_VERIFICATION
1756 def_bool n
1757 select SYSTEM_TRUSTED_KEYRING
1758 select KEYS
1759 select CRYPTO
1760 select ASYMMETRIC_KEY_TYPE
1761 select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
1762 select PUBLIC_KEY_ALGO_RSA
1763 select ASN1
1764 select OID_REGISTRY
1765 select X509_CERTIFICATE_PARSER
1766 select PKCS7_MESSAGE_PARSER
1767 help
1768 Provide PKCS#7 message verification using the contents of the system
1769 trusted keyring to provide public keys. This then can be used for
1770 module verification, kexec image verification and firmware blob
1771 verification.
1772
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001773config PROFILING
Robert Richterb309a292010-02-26 15:01:23 +01001774 bool "Profiling support"
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001775 help
1776 Say Y here to enable the extended profiling support mechanisms used
1777 by profilers such as OProfile.
1778
Ingo Molnar5f87f112008-07-23 14:15:22 +02001779#
1780# Place an empty function call at each tracepoint site. Can be
1781# dynamically changed for a probe function.
1782#
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001783config TRACEPOINTS
Ingo Molnar5f87f112008-07-23 14:15:22 +02001784 bool
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001785
Mathieu Desnoyersfb32e032008-02-02 15:10:33 -05001786source "arch/Kconfig"
1787
Linus Torvalds1da177e2005-04-16 15:20:36 -07001788endmenu # General setup
1789
Dmitry Baryshkovee7e5512008-06-29 14:18:46 +04001790config HAVE_GENERIC_DMA_COHERENT
1791 bool
1792 default n
1793
Linus Torvalds158a9622008-01-02 13:04:48 -08001794config SLABINFO
1795 bool
1796 depends on PROC_FS
Christoph Lameter0f389ec2008-04-14 18:53:02 +03001797 depends on SLAB || SLUB_DEBUG
Linus Torvalds158a9622008-01-02 13:04:48 -08001798 default y
1799
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001800config RT_MUTEXES
Christoph Jaeger6341e622014-12-20 15:41:11 -05001801 bool
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001802
Linus Torvalds1da177e2005-04-16 15:20:36 -07001803config BASE_SMALL
1804 int
1805 default 0 if BASE_FULL
1806 default 1 if !BASE_FULL
1807
Jan Engelhardt66da5732007-07-15 23:39:29 -07001808menuconfig MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001809 bool "Enable loadable module support"
Yann E. MORIN11097a02013-08-11 16:07:50 +02001810 option modules
Linus Torvalds1da177e2005-04-16 15:20:36 -07001811 help
1812 Kernel modules are small pieces of compiled code which can
1813 be inserted in the running kernel, rather than being
1814 permanently built into the kernel. You use the "modprobe"
1815 tool to add (and sometimes remove) them. If you say Y here,
1816 many parts of the kernel can be built as modules (by
1817 answering M instead of Y where indicated): this is most
1818 useful for infrequently used options which are not required
1819 for booting. For more information, see the man pages for
1820 modprobe, lsmod, modinfo, insmod and rmmod.
1821
1822 If you say Y here, you will need to run "make
1823 modules_install" to put the modules under /lib/modules/
1824 where modprobe can find them (you may need to be root to do
1825 this).
1826
1827 If unsure, say Y.
1828
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001829if MODULES
1830
Linus Torvalds826e4502008-05-04 17:04:16 -07001831config MODULE_FORCE_LOAD
1832 bool "Forced module loading"
Linus Torvalds826e4502008-05-04 17:04:16 -07001833 default n
1834 help
Rusty Russell91e37a72008-05-09 16:25:28 +10001835 Allow loading of modules without version information (ie. modprobe
1836 --force). Forced module loading sets the 'F' (forced) taint flag and
1837 is usually a really bad idea.
Linus Torvalds826e4502008-05-04 17:04:16 -07001838
Linus Torvalds1da177e2005-04-16 15:20:36 -07001839config MODULE_UNLOAD
1840 bool "Module unloading"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001841 help
1842 Without this option you will not be able to unload any
1843 modules (note that some modules may not be unloadable
Denys Vlasenkof7f5b672008-07-22 19:24:26 -05001844 anyway), which makes your kernel smaller, faster
1845 and simpler. If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001846
1847config MODULE_FORCE_UNLOAD
1848 bool "Forced module unloading"
Kees Cook19c92392012-10-02 11:19:29 -07001849 depends on MODULE_UNLOAD
Linus Torvalds1da177e2005-04-16 15:20:36 -07001850 help
1851 This option allows you to force a module to unload, even if the
1852 kernel believes it is unsafe: the kernel will remove the module
1853 without waiting for anyone to stop using it (using the -f option to
1854 rmmod). This is mainly for kernel developers and desperate users.
1855 If unsure, say N.
1856
Linus Torvalds1da177e2005-04-16 15:20:36 -07001857config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +01001858 bool "Module versioning support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001859 help
1860 Usually, you have to use modules compiled with your kernel.
1861 Saying Y here makes it sometimes possible to use modules
1862 compiled for different kernels, by adding enough information
1863 to the modules to (hopefully) spot any changes which would
1864 make them incompatible with the kernel you are running. If
1865 unsure, say N.
1866
1867config MODULE_SRCVERSION_ALL
1868 bool "Source checksum for all modules"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001869 help
1870 Modules which contain a MODULE_VERSION get an extra "srcversion"
1871 field inserted into their modinfo section, which contains a
1872 sum of the source files which made it. This helps maintainers
1873 see exactly which source was used to build a module (since
1874 others sometimes change the module source without updating
1875 the version). With this option, such a "srcversion" field
1876 will be created for all modules. If unsure, say N.
1877
Rusty Russell106a4ee2012-09-26 10:09:40 +01001878config MODULE_SIG
1879 bool "Module signature verification"
1880 depends on MODULES
David Howells091f6e22015-07-20 21:16:28 +01001881 select SYSTEM_DATA_VERIFICATION
Rusty Russell106a4ee2012-09-26 10:09:40 +01001882 help
1883 Check modules for valid signatures upon load: the signature
1884 is simply appended to the module. For more information see
1885 Documentation/module-signing.txt.
1886
David Howellsea0b6dc2012-09-26 10:09:50 +01001887 !!!WARNING!!! If you enable this option, you MUST make sure that the
1888 module DOES NOT get stripped after being signed. This includes the
1889 debuginfo strip done by some packagers (such as rpmbuild) and
1890 inclusion into an initramfs that wants the module size reduced.
1891
Rusty Russell106a4ee2012-09-26 10:09:40 +01001892config MODULE_SIG_FORCE
1893 bool "Require modules to be validly signed"
1894 depends on MODULE_SIG
1895 help
1896 Reject unsigned modules or signed modules for which we don't have a
1897 key. Without this, such modules will simply taint the kernel.
David Howellsea0b6dc2012-09-26 10:09:50 +01001898
Michal Marekd9d8d7e2013-01-25 13:41:31 +10301899config MODULE_SIG_ALL
1900 bool "Automatically sign all modules"
1901 default y
1902 depends on MODULE_SIG
1903 help
1904 Sign all modules during make modules_install. Without this option,
1905 modules must be signed manually, using the scripts/sign-file tool.
1906
1907comment "Do not forget to sign required modules with scripts/sign-file"
1908 depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
1909
David Howellsea0b6dc2012-09-26 10:09:50 +01001910choice
1911 prompt "Which hash algorithm should modules be signed with?"
1912 depends on MODULE_SIG
1913 help
1914 This determines which sort of hashing algorithm will be used during
1915 signature generation. This algorithm _must_ be built into the kernel
1916 directly so that signature verification can take place. It is not
1917 possible to load a signed module containing the algorithm to check
1918 the signature on that module.
1919
1920config MODULE_SIG_SHA1
1921 bool "Sign modules with SHA-1"
1922 select CRYPTO_SHA1
1923
1924config MODULE_SIG_SHA224
1925 bool "Sign modules with SHA-224"
1926 select CRYPTO_SHA256
1927
1928config MODULE_SIG_SHA256
1929 bool "Sign modules with SHA-256"
1930 select CRYPTO_SHA256
1931
1932config MODULE_SIG_SHA384
1933 bool "Sign modules with SHA-384"
1934 select CRYPTO_SHA512
1935
1936config MODULE_SIG_SHA512
1937 bool "Sign modules with SHA-512"
1938 select CRYPTO_SHA512
1939
1940endchoice
1941
Michal Marek22753672013-01-25 13:41:00 +10301942config MODULE_SIG_HASH
1943 string
1944 depends on MODULE_SIG
1945 default "sha1" if MODULE_SIG_SHA1
1946 default "sha224" if MODULE_SIG_SHA224
1947 default "sha256" if MODULE_SIG_SHA256
1948 default "sha384" if MODULE_SIG_SHA384
1949 default "sha512" if MODULE_SIG_SHA512
1950
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301951config MODULE_COMPRESS
1952 bool "Compress modules on installation"
1953 depends on MODULES
1954 help
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301955
Rusty Russellb6c09b52015-06-16 12:16:22 +09301956 Compresses kernel modules when 'make modules_install' is run; gzip or
1957 xz depending on "Compression algorithm" below.
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301958
Rusty Russellb6c09b52015-06-16 12:16:22 +09301959 module-init-tools MAY support gzip, and kmod MAY support gzip and xz.
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301960
Rusty Russellb6c09b52015-06-16 12:16:22 +09301961 Out-of-tree kernel modules installed using Kbuild will also be
1962 compressed upon installation.
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301963
Rusty Russellb6c09b52015-06-16 12:16:22 +09301964 Note: for modules inside an initrd or initramfs, it's more efficient
1965 to compress the whole initrd or initramfs instead.
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301966
Rusty Russellb6c09b52015-06-16 12:16:22 +09301967 Note: This is fully compatible with signed modules.
1968
1969 If in doubt, say N.
Bertrand Jacquinbeb50df2014-08-27 20:31:56 +09301970
1971choice
1972 prompt "Compression algorithm"
1973 depends on MODULE_COMPRESS
1974 default MODULE_COMPRESS_GZIP
1975 help
1976 This determines which sort of compression will be used during
1977 'make modules_install'.
1978
1979 GZIP (default) and XZ are supported.
1980
1981config MODULE_COMPRESS_GZIP
1982 bool "GZIP"
1983
1984config MODULE_COMPRESS_XZ
1985 bool "XZ"
1986
1987endchoice
1988
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001989endif # MODULES
1990
Peter Zijlstra6c9692e2015-05-27 11:09:37 +09301991config MODULES_TREE_LOOKUP
1992 def_bool y
1993 depends on PERF_EVENTS || TRACING
1994
Rusty Russell98a79d62008-12-13 21:19:41 +10301995config INIT_ALL_POSSIBLE
1996 bool
1997 help
Rusty Russell5f054e32012-03-29 15:38:31 +10301998 Back when each arch used to define their own cpu_online_mask and
1999 cpu_possible_mask, some of them chose to initialize cpu_possible_mask
Rusty Russell98a79d62008-12-13 21:19:41 +10302000 with all 1s, and others with all 0s. When they were centralised,
2001 it was better to provide this option than to break all the archs
Matt LaPlante692105b2009-01-26 11:12:25 +01002002 and have several arch maintainers pursuing me down dark alleys.
Rusty Russell98a79d62008-12-13 21:19:41 +10302003
Linus Torvalds1da177e2005-04-16 15:20:36 -07002004config STOP_MACHINE
2005 bool
2006 default y
2007 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
2008 help
2009 Need stop_machine() primitive.
Jens Axboe3a65dfe2005-11-04 08:43:35 +01002010
Jens Axboe3a65dfe2005-11-04 08:43:35 +01002011source "block/Kconfig"
Avi Kivitye98c3202007-10-16 23:27:31 -07002012
2013config PREEMPT_NOTIFIERS
2014 bool
Paul E. McKenneye260be62008-01-25 21:08:24 +01002015
Steffen Klassert16295be2010-01-06 19:47:10 +11002016config PADATA
2017 depends on SMP
2018 bool
2019
Andi Kleen754b7b62012-10-04 17:11:27 -07002020# Can be selected by architectures with broken toolchains
2021# that get confused by correct const<->read_only section
2022# mappings
2023config BROKEN_RODATA
2024 bool
2025
David Howells4520c6a2012-09-21 23:31:13 +01002026config ASN1
2027 tristate
2028 help
2029 Build a simple ASN.1 grammar compiler that produces a bytecode output
2030 that can be interpreted by the ASN.1 stream decoder and used to
2031 inform it as to what tags are to be expected in a stream and what
2032 functions to call on what tags.
2033
Thomas Gleixner6beb0002009-11-09 15:21:34 +00002034source "kernel/Kconfig.locks"