Vivek Gautam | dc2377d | 2013-03-14 15:59:10 +0530 | [diff] [blame] | 1 | /* linux/drivers/usb/phy/phy-samsung-usb.h |
| 2 | * |
| 3 | * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 4 | * http://www.samsung.com |
| 5 | * |
| 6 | * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and |
| 7 | * OHCI-EXYNOS controllers. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License version 2 as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | */ |
| 18 | |
| 19 | #include <linux/usb/phy.h> |
| 20 | |
| 21 | /* Register definitions */ |
| 22 | |
| 23 | #define SAMSUNG_PHYPWR (0x00) |
| 24 | |
| 25 | #define PHYPWR_NORMAL_MASK (0x19 << 0) |
| 26 | #define PHYPWR_OTG_DISABLE (0x1 << 4) |
| 27 | #define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) |
| 28 | #define PHYPWR_FORCE_SUSPEND (0x1 << 1) |
| 29 | /* For Exynos4 */ |
| 30 | #define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) |
| 31 | #define PHYPWR_SLEEP_PHY0 (0x1 << 5) |
| 32 | |
| 33 | #define SAMSUNG_PHYCLK (0x04) |
| 34 | |
| 35 | #define PHYCLK_MODE_USB11 (0x1 << 6) |
| 36 | #define PHYCLK_EXT_OSC (0x1 << 5) |
| 37 | #define PHYCLK_COMMON_ON_N (0x1 << 4) |
| 38 | #define PHYCLK_ID_PULL (0x1 << 2) |
| 39 | #define PHYCLK_CLKSEL_MASK (0x3 << 0) |
| 40 | #define PHYCLK_CLKSEL_48M (0x0 << 0) |
| 41 | #define PHYCLK_CLKSEL_12M (0x2 << 0) |
| 42 | #define PHYCLK_CLKSEL_24M (0x3 << 0) |
| 43 | |
| 44 | #define SAMSUNG_RSTCON (0x08) |
| 45 | |
| 46 | #define RSTCON_PHYLINK_SWRST (0x1 << 2) |
| 47 | #define RSTCON_HLINK_SWRST (0x1 << 1) |
| 48 | #define RSTCON_SWRST (0x1 << 0) |
| 49 | |
| 50 | /* EXYNOS5 */ |
| 51 | #define EXYNOS5_PHY_HOST_CTRL0 (0x00) |
| 52 | |
| 53 | #define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) |
| 54 | |
| 55 | #define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) |
| 56 | #define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) |
| 57 | #define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) |
| 58 | #define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) |
| 59 | |
| 60 | #define HOST_CTRL0_FSEL_MASK (0x7 << 16) |
| 61 | #define HOST_CTRL0_FSEL(_x) ((_x) << 16) |
| 62 | |
| 63 | #define FSEL_CLKSEL_50M (0x7) |
| 64 | #define FSEL_CLKSEL_24M (0x5) |
| 65 | #define FSEL_CLKSEL_20M (0x4) |
| 66 | #define FSEL_CLKSEL_19200K (0x3) |
| 67 | #define FSEL_CLKSEL_12M (0x2) |
| 68 | #define FSEL_CLKSEL_10M (0x1) |
| 69 | #define FSEL_CLKSEL_9600K (0x0) |
| 70 | |
| 71 | #define HOST_CTRL0_TESTBURNIN (0x1 << 11) |
| 72 | #define HOST_CTRL0_RETENABLE (0x1 << 10) |
| 73 | #define HOST_CTRL0_COMMONON_N (0x1 << 9) |
| 74 | #define HOST_CTRL0_SIDDQ (0x1 << 6) |
| 75 | #define HOST_CTRL0_FORCESLEEP (0x1 << 5) |
| 76 | #define HOST_CTRL0_FORCESUSPEND (0x1 << 4) |
| 77 | #define HOST_CTRL0_WORDINTERFACE (0x1 << 3) |
| 78 | #define HOST_CTRL0_UTMISWRST (0x1 << 2) |
| 79 | #define HOST_CTRL0_LINKSWRST (0x1 << 1) |
| 80 | #define HOST_CTRL0_PHYSWRST (0x1 << 0) |
| 81 | |
| 82 | #define EXYNOS5_PHY_HOST_TUNE0 (0x04) |
| 83 | |
| 84 | #define EXYNOS5_PHY_HSIC_CTRL1 (0x10) |
| 85 | |
| 86 | #define EXYNOS5_PHY_HSIC_TUNE1 (0x14) |
| 87 | |
| 88 | #define EXYNOS5_PHY_HSIC_CTRL2 (0x20) |
| 89 | |
| 90 | #define EXYNOS5_PHY_HSIC_TUNE2 (0x24) |
| 91 | |
| 92 | #define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) |
| 93 | #define HSIC_CTRL_REFCLKSEL (0x2 << 23) |
| 94 | |
| 95 | #define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) |
| 96 | #define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) |
| 97 | #define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) |
| 98 | #define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) |
| 99 | #define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) |
| 100 | #define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) |
| 101 | #define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) |
| 102 | |
| 103 | #define HSIC_CTRL_SIDDQ (0x1 << 6) |
| 104 | #define HSIC_CTRL_FORCESLEEP (0x1 << 5) |
| 105 | #define HSIC_CTRL_FORCESUSPEND (0x1 << 4) |
| 106 | #define HSIC_CTRL_WORDINTERFACE (0x1 << 3) |
| 107 | #define HSIC_CTRL_UTMISWRST (0x1 << 2) |
| 108 | #define HSIC_CTRL_PHYSWRST (0x1 << 0) |
| 109 | |
| 110 | #define EXYNOS5_PHY_HOST_EHCICTRL (0x30) |
| 111 | |
| 112 | #define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) |
| 113 | #define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) |
| 114 | #define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) |
| 115 | #define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) |
| 116 | |
| 117 | #define EXYNOS5_PHY_HOST_OHCICTRL (0x34) |
| 118 | |
| 119 | #define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) |
| 120 | #define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) |
| 121 | #define HOST_OHCICTRL_CNTSEL (0x1 << 1) |
| 122 | #define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) |
| 123 | |
| 124 | #define EXYNOS5_PHY_OTG_SYS (0x38) |
| 125 | |
| 126 | #define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) |
| 127 | #define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) |
| 128 | #define OTG_SYS_PHY0_SWRST (0x1 << 12) |
| 129 | |
| 130 | #define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) |
| 131 | #define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) |
| 132 | #define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) |
| 133 | #define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) |
| 134 | |
| 135 | #define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) |
| 136 | #define OTG_SYS_COMMON_ON (0x1 << 7) |
| 137 | |
| 138 | #define OTG_SYS_FSEL_MASK (0x7 << 4) |
| 139 | #define OTG_SYS_FSEL(_x) ((_x) << 4) |
| 140 | |
| 141 | #define OTG_SYS_FORCESLEEP (0x1 << 3) |
| 142 | #define OTG_SYS_OTGDISABLE (0x1 << 2) |
| 143 | #define OTG_SYS_SIDDQ_UOTG (0x1 << 1) |
| 144 | #define OTG_SYS_FORCESUSPEND (0x1 << 0) |
| 145 | |
| 146 | #define EXYNOS5_PHY_OTG_TUNE (0x40) |
| 147 | |
Vivek Gautam | b527675 | 2013-03-14 15:59:11 +0530 | [diff] [blame] | 148 | /* EXYNOS5: USB 3.0 DRD */ |
| 149 | #define EXYNOS5_DRD_LINKSYSTEM (0x04) |
| 150 | |
| 151 | #define LINKSYSTEM_FLADJ_MASK (0x3f << 1) |
| 152 | #define LINKSYSTEM_FLADJ(_x) ((_x) << 1) |
| 153 | #define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) |
| 154 | |
| 155 | #define EXYNOS5_DRD_PHYUTMI (0x08) |
| 156 | |
| 157 | #define PHYUTMI_OTGDISABLE (0x1 << 6) |
| 158 | #define PHYUTMI_FORCESUSPEND (0x1 << 1) |
| 159 | #define PHYUTMI_FORCESLEEP (0x1 << 0) |
| 160 | |
| 161 | #define EXYNOS5_DRD_PHYPIPE (0x0c) |
| 162 | |
| 163 | #define EXYNOS5_DRD_PHYCLKRST (0x10) |
| 164 | |
| 165 | #define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) |
| 166 | #define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) |
| 167 | |
| 168 | #define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) |
| 169 | #define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) |
| 170 | |
| 171 | #define PHYCLKRST_SSC_EN (0x1 << 20) |
| 172 | #define PHYCLKRST_REF_SSP_EN (0x1 << 19) |
| 173 | #define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) |
| 174 | |
| 175 | #define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) |
| 176 | #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) |
| 177 | #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) |
| 178 | #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) |
| 179 | #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) |
| 180 | #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) |
| 181 | |
| 182 | #define PHYCLKRST_FSEL_MASK (0x3f << 5) |
| 183 | #define PHYCLKRST_FSEL(_x) ((_x) << 5) |
| 184 | #define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) |
| 185 | #define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) |
| 186 | #define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) |
| 187 | #define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) |
| 188 | |
| 189 | #define PHYCLKRST_RETENABLEN (0x1 << 4) |
| 190 | |
| 191 | #define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) |
| 192 | #define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) |
| 193 | #define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) |
| 194 | |
| 195 | #define PHYCLKRST_PORTRESET (0x1 << 1) |
| 196 | #define PHYCLKRST_COMMONONN (0x1 << 0) |
| 197 | |
| 198 | #define EXYNOS5_DRD_PHYREG0 (0x14) |
| 199 | #define EXYNOS5_DRD_PHYREG1 (0x18) |
| 200 | |
| 201 | #define EXYNOS5_DRD_PHYPARAM0 (0x1c) |
| 202 | |
| 203 | #define PHYPARAM0_REF_USE_PAD (0x1 << 31) |
| 204 | #define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) |
| 205 | #define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) |
| 206 | |
| 207 | #define EXYNOS5_DRD_PHYPARAM1 (0x20) |
| 208 | |
| 209 | #define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) |
| 210 | #define PHYPARAM1_PCS_TXDEEMPH (0x1c) |
| 211 | |
| 212 | #define EXYNOS5_DRD_PHYTERM (0x24) |
| 213 | |
| 214 | #define EXYNOS5_DRD_PHYTEST (0x28) |
| 215 | |
| 216 | #define PHYTEST_POWERDOWN_SSP (0x1 << 3) |
| 217 | #define PHYTEST_POWERDOWN_HSP (0x1 << 2) |
| 218 | |
| 219 | #define EXYNOS5_DRD_PHYADP (0x2c) |
| 220 | |
| 221 | #define EXYNOS5_DRD_PHYBATCHG (0x30) |
| 222 | |
| 223 | #define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) |
| 224 | |
| 225 | #define EXYNOS5_DRD_PHYRESUME (0x34) |
| 226 | #define EXYNOS5_DRD_LINKPORT (0x44) |
| 227 | |
Vivek Gautam | dc2377d | 2013-03-14 15:59:10 +0530 | [diff] [blame] | 228 | #ifndef MHZ |
| 229 | #define MHZ (1000*1000) |
| 230 | #endif |
| 231 | |
| 232 | #ifndef KHZ |
| 233 | #define KHZ (1000) |
| 234 | #endif |
| 235 | |
| 236 | #define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) |
| 237 | #define S3C64XX_USBPHY_ENABLE (0x1 << 16) |
| 238 | #define EXYNOS_USBPHY_ENABLE (0x1 << 0) |
| 239 | #define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) |
| 240 | |
| 241 | enum samsung_cpu_type { |
| 242 | TYPE_S3C64XX, |
| 243 | TYPE_EXYNOS4210, |
| 244 | TYPE_EXYNOS5250, |
| 245 | }; |
| 246 | |
Tomasz Figa | 0aa823a | 2013-05-16 11:57:08 +0200 | [diff] [blame^] | 247 | struct samsung_usbphy; |
| 248 | |
Vivek Gautam | dc2377d | 2013-03-14 15:59:10 +0530 | [diff] [blame] | 249 | /* |
| 250 | * struct samsung_usbphy_drvdata - driver data for various SoC variants |
| 251 | * @cpu_type: machine identifier |
| 252 | * @devphy_en_mask: device phy enable mask for PHY CONTROL register |
| 253 | * @hostphy_en_mask: host phy enable mask for PHY CONTROL register |
| 254 | * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from |
| 255 | * mapped address of system controller. |
| 256 | * @hostphy_reg_offset: offset to HOST PHY CONTROL register from |
| 257 | * mapped address of system controller. |
| 258 | * |
| 259 | * Here we have a separate mask for device type phy. |
| 260 | * Having different masks for host and device type phy helps |
| 261 | * in setting independent masks in case of SoCs like S5PV210, |
| 262 | * in which PHY0 and PHY1 enable bits belong to same register |
| 263 | * placed at position 0 and 1 respectively. |
| 264 | * Although for newer SoCs like exynos these bits belong to |
| 265 | * different registers altogether placed at position 0. |
| 266 | */ |
| 267 | struct samsung_usbphy_drvdata { |
| 268 | int cpu_type; |
| 269 | int devphy_en_mask; |
| 270 | int hostphy_en_mask; |
| 271 | u32 devphy_reg_offset; |
| 272 | u32 hostphy_reg_offset; |
Tomasz Figa | 0aa823a | 2013-05-16 11:57:08 +0200 | [diff] [blame^] | 273 | int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long); |
Vivek Gautam | dc2377d | 2013-03-14 15:59:10 +0530 | [diff] [blame] | 274 | }; |
| 275 | |
| 276 | /* |
| 277 | * struct samsung_usbphy - transceiver driver state |
| 278 | * @phy: transceiver structure |
| 279 | * @plat: platform data |
| 280 | * @dev: The parent device supplied to the probe function |
| 281 | * @clk: usb phy clock |
| 282 | * @regs: usb phy controller registers memory base |
| 283 | * @pmuregs: USB device PHY_CONTROL register memory base |
| 284 | * @sysreg: USB2.0 PHY_CFG register memory base |
| 285 | * @ref_clk_freq: reference clock frequency selection |
| 286 | * @drv_data: driver data available for different SoCs |
| 287 | * @phy_type: Samsung SoCs specific phy types: #HOST |
| 288 | * #DEVICE |
| 289 | * @phy_usage: usage count for phy |
| 290 | * @lock: lock for phy operations |
| 291 | */ |
| 292 | struct samsung_usbphy { |
| 293 | struct usb_phy phy; |
| 294 | struct samsung_usbphy_data *plat; |
| 295 | struct device *dev; |
| 296 | struct clk *clk; |
| 297 | void __iomem *regs; |
| 298 | void __iomem *pmuregs; |
| 299 | void __iomem *sysreg; |
| 300 | int ref_clk_freq; |
| 301 | const struct samsung_usbphy_drvdata *drv_data; |
| 302 | enum samsung_usb_phy_type phy_type; |
| 303 | atomic_t phy_usage; |
| 304 | spinlock_t lock; |
| 305 | }; |
| 306 | |
| 307 | #define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) |
| 308 | |
| 309 | static const struct of_device_id samsung_usbphy_dt_match[]; |
| 310 | |
| 311 | static inline const struct samsung_usbphy_drvdata |
| 312 | *samsung_usbphy_get_driver_data(struct platform_device *pdev) |
| 313 | { |
| 314 | if (pdev->dev.of_node) { |
| 315 | const struct of_device_id *match; |
| 316 | match = of_match_node(samsung_usbphy_dt_match, |
| 317 | pdev->dev.of_node); |
| 318 | return match->data; |
| 319 | } |
| 320 | |
| 321 | return (struct samsung_usbphy_drvdata *) |
| 322 | platform_get_device_id(pdev)->driver_data; |
| 323 | } |
| 324 | |
| 325 | extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy); |
| 326 | extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on); |
| 327 | extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy); |
| 328 | extern int samsung_usbphy_set_type(struct usb_phy *phy, |
| 329 | enum samsung_usb_phy_type phy_type); |
| 330 | extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy); |
Tomasz Figa | 0aa823a | 2013-05-16 11:57:08 +0200 | [diff] [blame^] | 331 | extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy, |
| 332 | unsigned long rate); |
| 333 | extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy, |
| 334 | unsigned long rate); |