Jeff Garzik | 421b20b | 2006-08-14 14:27:36 -0400 | [diff] [blame] | 1 | # |
| 2 | # SATA/PATA driver configuration |
| 3 | # |
| 4 | |
Jan Engelhardt | b196fc6 | 2007-05-10 22:48:54 -0700 | [diff] [blame] | 5 | menuconfig ATA |
Robert Hancock | 097dac9 | 2009-11-12 20:13:40 -0600 | [diff] [blame] | 6 | tristate "Serial ATA and Parallel ATA drivers" |
Martin Schwidefsky | e25df12 | 2007-05-10 15:45:57 +0200 | [diff] [blame] | 7 | depends on HAS_IOMEM |
Adrian Bunk | bf2d401 | 2006-10-20 14:39:35 -0700 | [diff] [blame] | 8 | depends on BLOCK |
Al Viro | 9317fd4 | 2006-09-24 23:40:00 +0100 | [diff] [blame] | 9 | depends on !(M32R || M68K) || BROKEN |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 10 | select SCSI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 11 | ---help--- |
| 12 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or |
| 13 | any other ATA device under Linux, say Y and make sure that you know |
| 14 | the name of your ATA host adapter (the card inside your computer |
| 15 | that "speaks" the ATA protocol, also called ATA controller), |
| 16 | because you will be asked for it. |
| 17 | |
Randy Dunlap | abcdceb | 2007-06-11 11:59:34 -0700 | [diff] [blame] | 18 | NOTE: ATA enables basic SCSI support; *however*, |
| 19 | 'SCSI disk support', 'SCSI tape support', or |
| 20 | 'SCSI CDROM support' may also be needed, |
| 21 | depending on your hardware configuration. |
| 22 | |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 23 | if ATA |
| 24 | |
David Woodhouse | 8cdf92a | 2007-01-01 19:31:15 +0000 | [diff] [blame] | 25 | config ATA_NONSTANDARD |
| 26 | bool |
| 27 | default n |
| 28 | |
Robert Hancock | 6521148 | 2009-07-14 20:43:39 -0600 | [diff] [blame] | 29 | config ATA_VERBOSE_ERROR |
| 30 | bool "Verbose ATA error reporting" |
| 31 | default y |
| 32 | help |
| 33 | This option adds parsing of ATA command descriptions and error bits |
| 34 | in libata kernel output, making it easier to interpret. |
| 35 | This option will enlarge the kernel by approx. 6KB. Disable it only |
| 36 | if kernel size is more important than ease of debugging. |
| 37 | |
| 38 | If unsure, say Y. |
| 39 | |
Tejun Heo | e92351b | 2007-05-05 23:50:38 +0900 | [diff] [blame] | 40 | config ATA_ACPI |
Chris Wedgwood | c30484d | 2008-03-18 15:06:48 -0700 | [diff] [blame] | 41 | bool "ATA ACPI Support" |
Tejun Heo | e92351b | 2007-05-05 23:50:38 +0900 | [diff] [blame] | 42 | depends on ACPI && PCI |
| 43 | default y |
| 44 | help |
| 45 | This option adds support for ATA-related ACPI objects. |
| 46 | These ACPI objects add the ability to retrieve taskfiles |
| 47 | from the ACPI BIOS and write them to the disk controller. |
| 48 | These objects may be related to performance, security, |
| 49 | power management, or other areas. |
| 50 | You can disable this at kernel boot time by using the |
| 51 | option libata.noacpi=1 |
| 52 | |
Tejun Heo | 88fcd56 | 2008-04-07 22:47:22 +0900 | [diff] [blame] | 53 | config SATA_PMP |
| 54 | bool "SATA Port Multiplier support" |
| 55 | default y |
| 56 | help |
Jeff Garzik | f3360eb | 2008-04-17 15:55:24 -0400 | [diff] [blame] | 57 | This option adds support for SATA Port Multipliers |
| 58 | (the SATA version of an ethernet hub, or SAS expander). |
Tejun Heo | 88fcd56 | 2008-04-07 22:47:22 +0900 | [diff] [blame] | 59 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 60 | comment "Controllers with non-SFF native interface" |
| 61 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 62 | config SATA_AHCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 63 | tristate "AHCI SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 64 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 65 | help |
| 66 | This option enables support for AHCI Serial ATA. |
| 67 | |
| 68 | If unsure, say N. |
| 69 | |
Anton Vorontsov | 1c2a49f | 2010-03-04 20:06:06 +0300 | [diff] [blame] | 70 | config SATA_AHCI_PLATFORM |
| 71 | tristate "Platform AHCI SATA support" |
| 72 | help |
| 73 | This option enables support for Platform AHCI Serial ATA |
| 74 | controllers. |
| 75 | |
| 76 | If unsure, say N. |
| 77 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 78 | config SATA_FSL |
| 79 | tristate "Freescale 3.0Gbps SATA support" |
| 80 | depends on FSL_SOC |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 81 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 82 | This option enables support for Freescale 3.0Gbps SATA controller. |
| 83 | It can be found on MPC837x and MPC8315. |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 84 | |
| 85 | If unsure, say N. |
| 86 | |
Tejun Heo | 6f79146 | 2010-05-10 21:41:26 +0200 | [diff] [blame] | 87 | config SATA_INIC162X |
| 88 | tristate "Initio 162x SATA support" |
| 89 | depends on PCI |
| 90 | help |
| 91 | This option enables support for Initio 162x Serial ATA. |
| 92 | |
David Milburn | 02cdfcf | 2010-11-12 15:38:21 -0600 | [diff] [blame] | 93 | config SATA_ACARD_AHCI |
| 94 | tristate "ACard AHCI variant (ATP 8620)" |
| 95 | depends on PCI |
| 96 | help |
| 97 | This option enables support for Acard. |
| 98 | |
| 99 | If unsure, say N. |
| 100 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 101 | config SATA_SIL24 |
| 102 | tristate "Silicon Image 3124/3132 SATA support" |
| 103 | depends on PCI |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 104 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 105 | This option enables support for Silicon Image 3124/3132 Serial ATA. |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 106 | |
| 107 | If unsure, say N. |
| 108 | |
| 109 | config ATA_SFF |
| 110 | bool "ATA SFF support" |
| 111 | default y |
| 112 | help |
| 113 | This option adds support for ATA controllers with SFF |
| 114 | compliant or similar programming interface. |
| 115 | |
Jeff Garzik | f3360eb | 2008-04-17 15:55:24 -0400 | [diff] [blame] | 116 | SFF is the legacy IDE interface that has been around since |
| 117 | the dawn of time. Almost all PATA controllers have an |
| 118 | SFF interface. Many SATA controllers have an SFF interface |
| 119 | when configured into a legacy compatibility mode. |
| 120 | |
| 121 | For users with exclusively modern controllers like AHCI, |
| 122 | Silicon Image 3124, or Marvell 6440, you may choose to |
Matt LaPlante | 692105b | 2009-01-26 11:12:25 +0100 | [diff] [blame] | 123 | disable this unneeded SFF support. |
Jeff Garzik | f3360eb | 2008-04-17 15:55:24 -0400 | [diff] [blame] | 124 | |
| 125 | If unsure, say Y. |
| 126 | |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 127 | if ATA_SFF |
| 128 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 129 | comment "SFF controllers with custom DMA interface" |
| 130 | |
| 131 | config PDC_ADMA |
| 132 | tristate "Pacific Digital ADMA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 133 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 134 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 135 | This option enables support for Pacific Digital ADMA controllers |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 136 | |
| 137 | If unsure, say N. |
| 138 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 139 | config PATA_OCTEON_CF |
| 140 | tristate "OCTEON Boot Bus Compact Flash support" |
| 141 | depends on CPU_CAVIUM_OCTEON |
| 142 | help |
| 143 | This option enables a polled compact flash driver for use with |
| 144 | compact flash cards attached to the OCTEON boot bus. |
| 145 | |
| 146 | If unsure, say N. |
| 147 | |
| 148 | config SATA_QSTOR |
| 149 | tristate "Pacific Digital SATA QStor support" |
| 150 | depends on PCI |
| 151 | help |
| 152 | This option enables support for Pacific Digital Serial ATA QStor. |
| 153 | |
| 154 | If unsure, say N. |
| 155 | |
| 156 | config SATA_SX4 |
| 157 | tristate "Promise SATA SX4 support (Experimental)" |
| 158 | depends on PCI && EXPERIMENTAL |
| 159 | help |
| 160 | This option enables support for Promise Serial ATA SX4. |
| 161 | |
| 162 | If unsure, say N. |
| 163 | |
| 164 | config ATA_BMDMA |
| 165 | bool "ATA BMDMA support" |
| 166 | default y |
| 167 | help |
| 168 | This option adds support for SFF ATA controllers with BMDMA |
Stefan Richter | ed4e2f8 | 2010-05-29 12:47:45 +0200 | [diff] [blame] | 169 | capability. BMDMA stands for bus-master DMA and is the |
| 170 | de facto DMA interface for SFF controllers. |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 171 | |
Stefan Richter | ed4e2f8 | 2010-05-29 12:47:45 +0200 | [diff] [blame] | 172 | If unsure, say Y. |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 173 | |
| 174 | if ATA_BMDMA |
| 175 | |
| 176 | comment "SATA SFF controllers with BMDMA" |
| 177 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 178 | config ATA_PIIX |
Alan | 2c7620d | 2007-02-05 16:04:10 +0000 | [diff] [blame] | 179 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 180 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 181 | help |
Alan | 2bfc361 | 2006-12-16 12:54:29 +0000 | [diff] [blame] | 182 | This option enables support for ICH5/6/7/8 Serial ATA |
Alan | 2c7620d | 2007-02-05 16:04:10 +0000 | [diff] [blame] | 183 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
| 184 | host controllers. |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 185 | |
| 186 | If unsure, say N. |
| 187 | |
Rupjyoti Sarmah | 6293600 | 2010-07-06 16:36:03 +0530 | [diff] [blame] | 188 | config SATA_DWC |
| 189 | tristate "DesignWare Cores SATA support" |
| 190 | depends on 460EX |
| 191 | help |
| 192 | This option enables support for the on-chip SATA controller of the |
| 193 | AppliedMicro processor 460EX. |
| 194 | |
| 195 | If unsure, say N. |
| 196 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 197 | config SATA_MV |
Mark Lord | f9228c7 | 2009-01-21 10:34:17 -0500 | [diff] [blame] | 198 | tristate "Marvell SATA support" |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 199 | help |
| 200 | This option enables support for the Marvell Serial ATA family. |
Mark Lord | f9228c7 | 2009-01-21 10:34:17 -0500 | [diff] [blame] | 201 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
| 202 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 203 | |
| 204 | If unsure, say N. |
| 205 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 206 | config SATA_NV |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 207 | tristate "NVIDIA SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 208 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 209 | help |
| 210 | This option enables support for NVIDIA Serial ATA. |
| 211 | |
| 212 | If unsure, say N. |
| 213 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 214 | config SATA_PROMISE |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 215 | tristate "Promise SATA TX2/TX4 support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 216 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 217 | help |
| 218 | This option enables support for Promise Serial ATA TX2/TX4. |
| 219 | |
| 220 | If unsure, say N. |
| 221 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 222 | config SATA_SIL |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 223 | tristate "Silicon Image SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 224 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 225 | help |
| 226 | This option enables support for Silicon Image Serial ATA. |
| 227 | |
| 228 | If unsure, say N. |
| 229 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 230 | config SATA_SIS |
Alan | 9b14dec | 2007-01-08 16:11:07 +0000 | [diff] [blame] | 231 | tristate "SiS 964/965/966/180 SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 232 | depends on PCI |
Alan | 9b14dec | 2007-01-08 16:11:07 +0000 | [diff] [blame] | 233 | select PATA_SIS |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 234 | help |
Jeff Garzik | a617c09 | 2007-05-21 20:14:23 -0400 | [diff] [blame] | 235 | This option enables support for SiS Serial ATA on |
Alan | 9b14dec | 2007-01-08 16:11:07 +0000 | [diff] [blame] | 236 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
| 237 | The PATA support for SiS 180 requires additionally to |
| 238 | enable the PATA_SIS driver in the config. |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 239 | If unsure, say N. |
| 240 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 241 | config SATA_SVW |
| 242 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
| 243 | depends on PCI |
| 244 | help |
| 245 | This option enables support for Broadcom/Serverworks/Apple K2 |
| 246 | SATA support. |
| 247 | |
| 248 | If unsure, say N. |
| 249 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 250 | config SATA_ULI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 251 | tristate "ULi Electronics SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 252 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 253 | help |
| 254 | This option enables support for ULi Electronics SATA. |
| 255 | |
| 256 | If unsure, say N. |
| 257 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 258 | config SATA_VIA |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 259 | tristate "VIA SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 260 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 261 | help |
| 262 | This option enables support for VIA Serial ATA. |
| 263 | |
| 264 | If unsure, say N. |
| 265 | |
Jeff Garzik | 8ad92ba | 2006-08-14 14:10:07 -0400 | [diff] [blame] | 266 | config SATA_VITESSE |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 267 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
Jeff Garzik | 81ce3c4 | 2006-08-24 02:41:25 -0400 | [diff] [blame] | 268 | depends on PCI |
Jeff Garzik | c6fd280 | 2006-08-10 07:31:37 -0400 | [diff] [blame] | 269 | help |
| 270 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. |
| 271 | |
| 272 | If unsure, say N. |
| 273 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 274 | comment "PATA SFF controllers with BMDMA" |
Alan Cox | 025621f | 2007-10-04 21:32:58 +0100 | [diff] [blame] | 275 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 276 | config PATA_ALI |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 277 | tristate "ALi PATA support" |
| 278 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 279 | help |
| 280 | This option enables support for the ALi ATA interfaces |
| 281 | found on the many ALi chipsets. |
| 282 | |
| 283 | If unsure, say N. |
| 284 | |
| 285 | config PATA_AMD |
Alan Cox | 942d0947 | 2007-03-08 23:24:49 +0000 | [diff] [blame] | 286 | tristate "AMD/NVidia PATA support" |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 287 | depends on PCI |
| 288 | help |
| 289 | This option enables support for the AMD and NVidia PATA |
| 290 | interfaces found on the chipsets for Athlon/Athlon64. |
| 291 | |
| 292 | If unsure, say N. |
| 293 | |
| 294 | config PATA_ARTOP |
Alan Cox | c645fd3 | 2007-09-20 14:58:48 +0100 | [diff] [blame] | 295 | tristate "ARTOP 6210/6260 PATA support" |
| 296 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 297 | help |
| 298 | This option enables support for ARTOP PATA controllers. |
| 299 | |
| 300 | If unsure, say N. |
| 301 | |
| 302 | config PATA_ATIIXP |
Alan Cox | c645fd3 | 2007-09-20 14:58:48 +0100 | [diff] [blame] | 303 | tristate "ATI PATA support" |
| 304 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 305 | help |
| 306 | This option enables support for the ATI ATA interfaces |
| 307 | found on the many ATI chipsets. |
| 308 | |
| 309 | If unsure, say N. |
| 310 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 311 | config PATA_ATP867X |
| 312 | tristate "ARTOP/Acard ATP867X PATA support" |
| 313 | depends on PCI |
Alan Cox | b2248da | 2007-03-06 02:38:11 -0800 | [diff] [blame] | 314 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 315 | This option enables support for ARTOP/Acard ATP867X PATA |
| 316 | controllers. |
| 317 | |
| 318 | If unsure, say N. |
| 319 | |
| 320 | config PATA_BF54X |
| 321 | tristate "Blackfin 54x ATAPI support" |
| 322 | depends on BF542 || BF548 || BF549 |
| 323 | help |
| 324 | This option enables support for the built-in ATAPI controller on |
| 325 | Blackfin 54x family chips. |
Alan Cox | b2248da | 2007-03-06 02:38:11 -0800 | [diff] [blame] | 326 | |
| 327 | If unsure, say N. |
| 328 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 329 | config PATA_CMD64X |
Alan Cox | c645fd3 | 2007-09-20 14:58:48 +0100 | [diff] [blame] | 330 | tristate "CMD64x PATA support" |
| 331 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 332 | help |
| 333 | This option enables support for the CMD64x series chips |
| 334 | except for the CMD640. |
| 335 | |
| 336 | If unsure, say N. |
| 337 | |
| 338 | config PATA_CS5520 |
| 339 | tristate "CS5510/5520 PATA support" |
| 340 | depends on PCI |
| 341 | help |
| 342 | This option enables support for the Cyrix 5510/5520 |
| 343 | companion chip used with the MediaGX/Geode processor family. |
| 344 | |
| 345 | If unsure, say N. |
| 346 | |
| 347 | config PATA_CS5530 |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 348 | tristate "CS5530 PATA support" |
| 349 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 350 | help |
| 351 | This option enables support for the Cyrix/NatSemi/AMD CS5530 |
| 352 | companion chip used with the MediaGX/Geode processor family. |
| 353 | |
| 354 | If unsure, say N. |
| 355 | |
| 356 | config PATA_CS5535 |
| 357 | tristate "CS5535 PATA support (Experimental)" |
| 358 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL |
| 359 | help |
| 360 | This option enables support for the NatSemi/AMD CS5535 |
| 361 | companion chip used with the Geode processor family. |
| 362 | |
| 363 | If unsure, say N. |
| 364 | |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 365 | config PATA_CS5536 |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 366 | tristate "CS5536 PATA support" |
Wu Zhangjin | 9272dcc | 2010-12-24 21:39:08 +0800 | [diff] [blame] | 367 | depends on PCI |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 368 | help |
| 369 | This option enables support for the AMD CS5536 |
| 370 | companion chip used with the Geode LX processor family. |
| 371 | |
| 372 | If unsure, say N. |
| 373 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 374 | config PATA_CYPRESS |
| 375 | tristate "Cypress CY82C693 PATA support (Very Experimental)" |
| 376 | depends on PCI && EXPERIMENTAL |
| 377 | help |
| 378 | This option enables support for the Cypress/Contaq CY82C693 |
| 379 | chipset found in some Alpha systems |
| 380 | |
| 381 | If unsure, say N. |
| 382 | |
| 383 | config PATA_EFAR |
| 384 | tristate "EFAR SLC90E66 support" |
| 385 | depends on PCI |
| 386 | help |
| 387 | This option enables support for the EFAR SLC90E66 |
| 388 | IDE controller found on some older machines. |
| 389 | |
| 390 | If unsure, say N. |
| 391 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 392 | config PATA_HPT366 |
Alan Cox | c645fd3 | 2007-09-20 14:58:48 +0100 | [diff] [blame] | 393 | tristate "HPT 366/368 PATA support" |
| 394 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 395 | help |
| 396 | This option enables support for the HPT 366 and 368 |
| 397 | PATA controllers via the new ATA layer. |
| 398 | |
| 399 | If unsure, say N. |
| 400 | |
| 401 | config PATA_HPT37X |
Alan Cox | be315d4 | 2009-11-30 13:23:00 +0000 | [diff] [blame] | 402 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
| 403 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 404 | help |
| 405 | This option enables support for the majority of the later HPT |
| 406 | PATA controllers via the new ATA layer. |
| 407 | |
| 408 | If unsure, say N. |
| 409 | |
| 410 | config PATA_HPT3X2N |
Sergei Shtylyov | 0ca646d | 2010-12-28 21:46:40 +0300 | [diff] [blame^] | 411 | tristate "HPT 371N/372N/302N PATA support" |
Alan Cox | be315d4 | 2009-11-30 13:23:00 +0000 | [diff] [blame] | 412 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 413 | help |
| 414 | This option enables support for the N variant HPT PATA |
Sergei Shtylyov | 0ca646d | 2010-12-28 21:46:40 +0300 | [diff] [blame^] | 415 | controllers via the new ATA layer. |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 416 | |
| 417 | If unsure, say N. |
| 418 | |
| 419 | config PATA_HPT3X3 |
Alan Cox | 66e7da4 | 2007-07-09 11:46:22 -0700 | [diff] [blame] | 420 | tristate "HPT 343/363 PATA support" |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 421 | depends on PCI |
| 422 | help |
| 423 | This option enables support for the HPT 343/363 |
| 424 | PATA controllers via the new ATA layer |
| 425 | |
| 426 | If unsure, say N. |
| 427 | |
Alan Cox | 66e7da4 | 2007-07-09 11:46:22 -0700 | [diff] [blame] | 428 | config PATA_HPT3X3_DMA |
Alan Cox | be315d4 | 2009-11-30 13:23:00 +0000 | [diff] [blame] | 429 | bool "HPT 343/363 DMA support" |
Alan Cox | 66e7da4 | 2007-07-09 11:46:22 -0700 | [diff] [blame] | 430 | depends on PATA_HPT3X3 |
| 431 | help |
| 432 | This option enables DMA support for the HPT343/363 |
| 433 | controllers. Enable with care as there are still some |
| 434 | problems with DMA on this chipset. |
| 435 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 436 | config PATA_ICSIDE |
| 437 | tristate "Acorn ICS PATA support" |
| 438 | depends on ARM && ARCH_ACORN |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 439 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 440 | On Acorn systems, say Y here if you wish to use the ICS PATA |
| 441 | interface card. This is not required for ICS partition support. |
| 442 | If you are unsure, say N to this. |
| 443 | |
| 444 | config PATA_IT8213 |
| 445 | tristate "IT8213 PATA support (Experimental)" |
| 446 | depends on PCI && EXPERIMENTAL |
| 447 | help |
| 448 | This option enables support for the ITE 821 PATA |
| 449 | controllers via the new ATA layer. |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 450 | |
| 451 | If unsure, say N. |
| 452 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 453 | config PATA_IT821X |
Alan Cox | 942d0947 | 2007-03-08 23:24:49 +0000 | [diff] [blame] | 454 | tristate "IT8211/2 PATA support" |
| 455 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 456 | help |
| 457 | This option enables support for the ITE 8211 and 8212 |
| 458 | PATA controllers via the new ATA layer, including RAID |
| 459 | mode. |
| 460 | |
| 461 | If unsure, say N. |
| 462 | |
Jeff Garzik | 406176e | 2006-09-06 10:48:19 -0400 | [diff] [blame] | 463 | config PATA_JMICRON |
| 464 | tristate "JMicron PATA support" |
| 465 | depends on PCI |
| 466 | help |
| 467 | Enable support for the JMicron IDE controller, via the new |
| 468 | ATA layer. |
| 469 | |
| 470 | If unsure, say N. |
| 471 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 472 | config PATA_MACIO |
| 473 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" |
| 474 | depends on PPC_PMAC |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 475 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 476 | Most IDE capable PowerMacs have IDE busses driven by a variant |
| 477 | of this controller which is part of the Apple chipset used on |
| 478 | most PowerMac models. Some models have multiple busses using |
| 479 | different chipsets, though generally, MacIO is one of them. |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 480 | |
Alan Cox | 75742cb | 2006-10-16 16:40:06 +0100 | [diff] [blame] | 481 | config PATA_MARVELL |
| 482 | tristate "Marvell PATA support via legacy mode" |
| 483 | depends on PCI |
| 484 | help |
Alan Cox | 5b66c82 | 2008-09-03 14:48:34 +0100 | [diff] [blame] | 485 | This option enables limited support for the Marvell 88SE61xx ATA |
| 486 | controllers. If you wish to use only the SATA ports then select |
| 487 | the AHCI driver alone. If you wish to the use the PATA port or |
| 488 | both SATA and PATA include this driver. |
Alan Cox | 75742cb | 2006-10-16 16:40:06 +0100 | [diff] [blame] | 489 | |
| 490 | If unsure, say N. |
| 491 | |
Wolfram Sang | 869934a | 2010-12-22 16:50:10 +0100 | [diff] [blame] | 492 | config PATA_MPC52xx |
| 493 | tristate "Freescale MPC52xx SoC internal IDE" |
| 494 | depends on PPC_MPC52xx && PPC_BESTCOMM |
| 495 | select PPC_BESTCOMM_ATA |
| 496 | help |
| 497 | This option enables support for integrated IDE controller |
| 498 | of the Freescale MPC52xx SoC. |
| 499 | |
| 500 | If unsure, say N. |
| 501 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 502 | config PATA_NETCELL |
| 503 | tristate "NETCELL Revolution RAID support" |
| 504 | depends on PCI |
| 505 | help |
| 506 | This option enables support for the Netcell Revolution RAID |
| 507 | PATA controller. |
| 508 | |
| 509 | If unsure, say N. |
| 510 | |
Alan Cox | 51dbd49 | 2007-11-19 14:45:53 +0000 | [diff] [blame] | 511 | config PATA_NINJA32 |
Alan Cox | be315d4 | 2009-11-30 13:23:00 +0000 | [diff] [blame] | 512 | tristate "Ninja32/Delkin Cardbus ATA support" |
| 513 | depends on PCI |
Alan Cox | 51dbd49 | 2007-11-19 14:45:53 +0000 | [diff] [blame] | 514 | help |
| 515 | This option enables support for the Ninja32, Delkin and |
| 516 | possibly other brands of Cardbus ATA adapter |
| 517 | |
| 518 | If unsure, say N. |
| 519 | |
Alan Cox | c4b5b7b | 2007-09-29 02:35:10 -0400 | [diff] [blame] | 520 | config PATA_NS87415 |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 521 | tristate "Nat Semi NS87415 PATA support" |
| 522 | depends on PCI |
Alan Cox | c4b5b7b | 2007-09-29 02:35:10 -0400 | [diff] [blame] | 523 | help |
| 524 | This option enables support for the National Semiconductor |
| 525 | NS87415 PCI-IDE controller. |
| 526 | |
| 527 | If unsure, say N. |
| 528 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 529 | config PATA_OLDPIIX |
| 530 | tristate "Intel PATA old PIIX support" |
| 531 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 532 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 533 | This option enables support for early PIIX PATA support. |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 534 | |
| 535 | If unsure, say N. |
| 536 | |
| 537 | config PATA_OPTIDMA |
Alexey Dobriyan | 516e72c | 2007-01-05 16:37:00 -0800 | [diff] [blame] | 538 | tristate "OPTI FireStar PATA support (Very Experimental)" |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 539 | depends on PCI && EXPERIMENTAL |
| 540 | help |
| 541 | This option enables DMA/PIO support for the later OPTi |
| 542 | controllers found on some old motherboards and in some |
David Sterba | 3dde6ad | 2007-05-09 07:12:20 +0200 | [diff] [blame] | 543 | laptops. |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 544 | |
| 545 | If unsure, say N. |
| 546 | |
Alan Cox | be315d4 | 2009-11-30 13:23:00 +0000 | [diff] [blame] | 547 | config PATA_PDC2027X |
| 548 | tristate "Promise PATA 2027x support" |
| 549 | depends on PCI |
| 550 | help |
| 551 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. |
| 552 | |
| 553 | If unsure, say N. |
| 554 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 555 | config PATA_PDC_OLD |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 556 | tristate "Older Promise PATA controller support" |
| 557 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 558 | help |
| 559 | This option enables support for the Promise 20246, 20262, 20263, |
| 560 | 20265 and 20267 adapters. |
| 561 | |
| 562 | If unsure, say N. |
| 563 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 564 | config PATA_RADISYS |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 565 | tristate "RADISYS 82600 PATA support (Experimental)" |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 566 | depends on PCI && EXPERIMENTAL |
| 567 | help |
| 568 | This option enables support for the RADISYS 82600 |
| 569 | PATA controllers via the new ATA layer |
| 570 | |
| 571 | If unsure, say N. |
| 572 | |
Alan Cox | 6b40678 | 2009-06-24 18:29:44 +0100 | [diff] [blame] | 573 | config PATA_RDC |
| 574 | tristate "RDC PATA support" |
| 575 | depends on PCI |
| 576 | help |
| 577 | This option enables basic support for the later RDC PATA controllers |
| 578 | controllers via the new ATA layer. For the RDC 1010, you need to |
| 579 | enable the IT821X driver instead. |
| 580 | |
| 581 | If unsure, say N. |
| 582 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 583 | config PATA_SC1200 |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 584 | tristate "SC1200 PATA support" |
| 585 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 586 | help |
| 587 | This option enables support for the NatSemi/AMD SC1200 SoC |
| 588 | companion chip used with the Geode processor family. |
| 589 | |
| 590 | If unsure, say N. |
| 591 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 592 | config PATA_SCC |
| 593 | tristate "Toshiba's Cell Reference Set IDE support" |
| 594 | depends on PCI && PPC_CELLEB |
| 595 | help |
| 596 | This option enables support for the built-in IDE controller on |
| 597 | Toshiba Cell Reference Board. |
| 598 | |
| 599 | If unsure, say N. |
| 600 | |
| 601 | config PATA_SCH |
| 602 | tristate "Intel SCH PATA support" |
| 603 | depends on PCI |
| 604 | help |
| 605 | This option enables support for Intel SCH PATA on the Intel |
| 606 | SCH (US15W, US15L, UL11L) series host controllers. |
| 607 | |
| 608 | If unsure, say N. |
| 609 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 610 | config PATA_SERVERWORKS |
Alan Cox | 942d0947 | 2007-03-08 23:24:49 +0000 | [diff] [blame] | 611 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
| 612 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 613 | help |
| 614 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and |
| 615 | HT1000 PATA controllers, via the new ATA layer. |
| 616 | |
| 617 | If unsure, say N. |
| 618 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 619 | config PATA_SIL680 |
| 620 | tristate "CMD / Silicon Image 680 PATA support" |
| 621 | depends on PCI |
| 622 | help |
| 623 | This option enables support for CMD / Silicon Image 680 PATA. |
| 624 | |
| 625 | If unsure, say N. |
| 626 | |
| 627 | config PATA_SIS |
Alan Cox | e3389cb | 2008-12-05 19:43:03 +0000 | [diff] [blame] | 628 | tristate "SiS PATA support" |
| 629 | depends on PCI |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 630 | help |
| 631 | This option enables support for SiS PATA controllers |
| 632 | |
| 633 | If unsure, say N. |
| 634 | |
Alan Cox | 8e182a9 | 2009-11-30 13:23:11 +0000 | [diff] [blame] | 635 | config PATA_TOSHIBA |
| 636 | tristate "Toshiba Piccolo support (Experimental)" |
| 637 | depends on PCI && EXPERIMENTAL |
| 638 | help |
| 639 | Support for the Toshiba Piccolo controllers. Currently only the |
| 640 | primary channel is supported by this driver. |
| 641 | |
| 642 | If unsure, say N. |
| 643 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 644 | config PATA_TRIFLEX |
| 645 | tristate "Compaq Triflex PATA support" |
| 646 | depends on PCI |
| 647 | help |
| 648 | Enable support for the Compaq 'Triflex' IDE controller as found |
| 649 | on many Compaq Pentium-Pro systems, via the new ATA layer. |
| 650 | |
| 651 | If unsure, say N. |
| 652 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 653 | config PATA_VIA |
| 654 | tristate "VIA PATA support" |
| 655 | depends on PCI |
| 656 | help |
| 657 | This option enables support for the VIA PATA interfaces |
| 658 | found on the many VIA chipsets. |
| 659 | |
| 660 | If unsure, say N. |
| 661 | |
Marek Vasut | 2dc6c6f | 2010-05-21 03:12:44 +0200 | [diff] [blame] | 662 | config PATA_PXA |
| 663 | tristate "PXA DMA-capable PATA support" |
| 664 | depends on ARCH_PXA |
| 665 | help |
| 666 | This option enables support for harddrive attached to PXA CPU's bus. |
| 667 | |
| 668 | NOTE: This driver utilizes PXA DMA controller, in case your hardware |
| 669 | is not capable of doing MWDMA, use pata_platform instead. |
| 670 | |
| 671 | If unsure, say N. |
| 672 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 673 | config PATA_WINBOND |
| 674 | tristate "Winbond SL82C105 PATA support" |
| 675 | depends on PCI |
| 676 | help |
| 677 | This option enables support for SL82C105 PATA devices found in the |
| 678 | Netwinder and some other systems |
| 679 | |
| 680 | If unsure, say N. |
| 681 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 682 | endif # ATA_BMDMA |
| 683 | |
| 684 | comment "PIO-only SFF controllers" |
| 685 | |
| 686 | config PATA_AT32 |
| 687 | tristate "Atmel AVR32 PATA support (Experimental)" |
| 688 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL |
Alan Cox | 7e45b0e | 2006-09-29 18:30:05 +0100 | [diff] [blame] | 689 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 690 | This option enables support for the IDE devices on the |
| 691 | Atmel AT32AP platform. |
| 692 | |
| 693 | If unsure, say N. |
| 694 | |
| 695 | config PATA_AT91 |
| 696 | tristate "PATA support for AT91SAM9260" |
| 697 | depends on ARM && ARCH_AT91 |
| 698 | help |
| 699 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. |
| 700 | |
| 701 | If unsure, say N. |
| 702 | |
| 703 | config PATA_CMD640_PCI |
| 704 | tristate "CMD640 PCI PATA support (Experimental)" |
| 705 | depends on PCI && EXPERIMENTAL |
| 706 | help |
| 707 | This option enables support for the CMD640 PCI IDE |
| 708 | interface chip. Only the primary channel is currently |
| 709 | supported. |
| 710 | |
| 711 | If unsure, say N. |
| 712 | |
| 713 | config PATA_ISAPNP |
| 714 | tristate "ISA Plug and Play PATA support" |
| 715 | depends on ISAPNP |
| 716 | help |
| 717 | This option enables support for ISA plug & play ATA |
| 718 | controllers such as those found on old soundcards. |
| 719 | |
| 720 | If unsure, say N. |
| 721 | |
| 722 | config PATA_IXP4XX_CF |
| 723 | tristate "IXP4XX Compact Flash support" |
| 724 | depends on ARCH_IXP4XX |
| 725 | help |
| 726 | This option enables support for a Compact Flash connected on |
| 727 | the ixp4xx expansion bus. This driver had been written for |
| 728 | Loft/Avila boards in mind but can work with others. |
| 729 | |
| 730 | If unsure, say N. |
| 731 | |
| 732 | config PATA_MPIIX |
| 733 | tristate "Intel PATA MPIIX support" |
| 734 | depends on PCI |
| 735 | help |
| 736 | This option enables support for MPIIX PATA support. |
| 737 | |
| 738 | If unsure, say N. |
| 739 | |
| 740 | config PATA_NS87410 |
| 741 | tristate "Nat Semi NS87410 PATA support" |
| 742 | depends on PCI |
| 743 | help |
| 744 | This option enables support for the National Semiconductor |
| 745 | NS87410 PCI-IDE controller. |
| 746 | |
| 747 | If unsure, say N. |
| 748 | |
| 749 | config PATA_OPTI |
| 750 | tristate "OPTI621/6215 PATA support (Very Experimental)" |
| 751 | depends on PCI && EXPERIMENTAL |
| 752 | help |
| 753 | This option enables full PIO support for the early Opti ATA |
| 754 | controllers found on some old motherboards. |
| 755 | |
| 756 | If unsure, say N. |
| 757 | |
| 758 | config PATA_PALMLD |
| 759 | tristate "Palm LifeDrive PATA support" |
| 760 | depends on MACH_PALMLD |
| 761 | help |
| 762 | This option enables support for Palm LifeDrive's internal ATA |
| 763 | port via the new ATA layer. |
| 764 | |
| 765 | If unsure, say N. |
| 766 | |
| 767 | config PATA_PCMCIA |
| 768 | tristate "PCMCIA PATA support" |
| 769 | depends on PCMCIA |
| 770 | help |
| 771 | This option enables support for PCMCIA ATA interfaces, including |
| 772 | compact flash card adapters via the new ATA layer. |
| 773 | |
| 774 | If unsure, say N. |
Alan Cox | 7e45b0e | 2006-09-29 18:30:05 +0100 | [diff] [blame] | 775 | |
Ben Dooks | cc18e0f | 2008-06-16 12:16:26 +0100 | [diff] [blame] | 776 | config HAVE_PATA_PLATFORM |
| 777 | bool |
| 778 | help |
| 779 | This is an internal configuration node for any machine that |
| 780 | uses pata-platform driver to enable the relevant driver in the |
| 781 | configuration structure without having to submit endless patches |
| 782 | to update the PATA_PLATFORM entry. |
| 783 | |
Paul Mundt | a20c9e8 | 2006-10-27 19:08:48 -0700 | [diff] [blame] | 784 | config PATA_PLATFORM |
| 785 | tristate "Generic platform device PATA support" |
Ben Dooks | 2ad6967 | 2008-09-26 18:12:52 +0100 | [diff] [blame] | 786 | depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM |
Paul Mundt | a20c9e8 | 2006-10-27 19:08:48 -0700 | [diff] [blame] | 787 | help |
| 788 | This option enables support for generic directly connected ATA |
| 789 | devices commonly found on embedded systems. |
| 790 | |
| 791 | If unsure, say N. |
| 792 | |
Anton Vorontsov | 61f7162 | 2008-01-09 22:10:41 +0300 | [diff] [blame] | 793 | config PATA_OF_PLATFORM |
| 794 | tristate "OpenFirmware platform device PATA support" |
| 795 | depends on PATA_PLATFORM && PPC_OF |
| 796 | help |
| 797 | This option enables support for generic directly connected ATA |
| 798 | devices commonly found on embedded systems with OpenFirmware |
| 799 | bindings. |
| 800 | |
| 801 | If unsure, say N. |
| 802 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 803 | config PATA_QDI |
| 804 | tristate "QDI VLB PATA support" |
| 805 | depends on ISA |
Russell King | 73b6a2b | 2007-05-03 09:55:52 +0100 | [diff] [blame] | 806 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 807 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
Russell King | 73b6a2b | 2007-05-03 09:55:52 +0100 | [diff] [blame] | 808 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 809 | config PATA_RB532 |
| 810 | tristate "RouterBoard 532 PATA CompactFlash support" |
| 811 | depends on MIKROTIK_RB532 |
Alessandro Zummo | 0df0d0a | 2006-11-14 13:43:21 -0500 | [diff] [blame] | 812 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 813 | This option enables support for the RouterBoard 532 |
| 814 | PATA CompactFlash controller. |
Alessandro Zummo | 0df0d0a | 2006-11-14 13:43:21 -0500 | [diff] [blame] | 815 | |
| 816 | If unsure, say N. |
| 817 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 818 | config PATA_RZ1000 |
| 819 | tristate "PC Tech RZ1000 PATA support" |
Alek Du | 07ab85d | 2008-05-06 21:31:41 +0800 | [diff] [blame] | 820 | depends on PCI |
| 821 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 822 | This option enables basic support for the PC Tech RZ1000/1 |
| 823 | PATA controllers via the new ATA layer |
Alek Du | 07ab85d | 2008-05-06 21:31:41 +0800 | [diff] [blame] | 824 | |
| 825 | If unsure, say N. |
| 826 | |
Abhilash Kesavan | 155bf48 | 2010-07-13 13:23:05 +0900 | [diff] [blame] | 827 | config PATA_SAMSUNG_CF |
| 828 | tristate "Samsung SoC PATA support" |
| 829 | depends on SAMSUNG_DEV_IDE |
| 830 | help |
| 831 | This option enables basic support for Samsung's S3C/S5P board |
| 832 | PATA controllers via the new ATA layer |
| 833 | |
| 834 | If unsure, say N. |
| 835 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 836 | config PATA_WINBOND_VLB |
| 837 | tristate "Winbond W83759A VLB PATA support (Experimental)" |
| 838 | depends on ISA && EXPERIMENTAL |
Bartlomiej Zolnierkiewicz | 6d981b9 | 2009-11-25 07:08:33 +0000 | [diff] [blame] | 839 | select PATA_LEGACY |
Sonic Zhang | d830d17 | 2007-08-21 13:12:31 +0800 | [diff] [blame] | 840 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 841 | Support for the Winbond W83759A controller on Vesa Local Bus |
| 842 | systems. |
| 843 | |
| 844 | comment "Generic fallback / legacy drivers" |
| 845 | |
| 846 | config PATA_ACPI |
| 847 | tristate "ACPI firmware driver for PATA" |
| 848 | depends on ATA_ACPI && ATA_BMDMA |
| 849 | help |
| 850 | This option enables an ACPI method driver which drives |
| 851 | motherboard PATA controller interfaces through the ACPI |
| 852 | firmware in the BIOS. This driver can sometimes handle |
| 853 | otherwise unsupported hardware. |
| 854 | |
| 855 | config ATA_GENERIC |
| 856 | tristate "Generic ATA support" |
| 857 | depends on PCI && ATA_BMDMA |
| 858 | help |
| 859 | This option enables support for generic BIOS configured |
| 860 | ATA controllers via the new ATA layer |
Sonic Zhang | d830d17 | 2007-08-21 13:12:31 +0800 | [diff] [blame] | 861 | |
| 862 | If unsure, say N. |
| 863 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 864 | config PATA_LEGACY |
| 865 | tristate "Legacy ISA PATA support (Experimental)" |
| 866 | depends on (ISA || PCI) && EXPERIMENTAL |
Benjamin Herrenschmidt | 88358ab | 2009-12-01 14:36:29 +0000 | [diff] [blame] | 867 | help |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 868 | This option enables support for ISA/VLB/PCI bus legacy PATA |
| 869 | ports and allows them to be accessed via the new ATA layer. |
Benjamin Herrenschmidt | 88358ab | 2009-12-01 14:36:29 +0000 | [diff] [blame] | 870 | |
Tejun Heo | 9a7780c | 2010-05-19 22:10:24 +0200 | [diff] [blame] | 871 | If unsure, say N. |
Benjamin Herrenschmidt | 88358ab | 2009-12-01 14:36:29 +0000 | [diff] [blame] | 872 | |
Tejun Heo | 127102a | 2008-04-07 22:47:21 +0900 | [diff] [blame] | 873 | endif # ATA_SFF |
Jan Engelhardt | b196fc6 | 2007-05-10 22:48:54 -0700 | [diff] [blame] | 874 | endif # ATA |