blob: e63b9dffc8d7304ecd6fcfaa2b363ffd07838131 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * dz.c: Serial port driver for DECStations equiped
3 * with the DZ chipset.
4 *
5 * Copyright (C) 1998 Olivier A. D. Lebaillif
6 *
7 * Email: olivier.lebaillif@ifrsys.com
8 *
9 * [31-AUG-98] triemer
10 * Changed IRQ to use Harald's dec internals interrupts.h
11 * removed base_addr code - moving address assignment to setup.c
12 * Changed name of dz_init to rs_init to be consistent with tc code
13 * [13-NOV-98] triemer fixed code to receive characters
14 * after patches by harald to irq code.
15 * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
16 * field from "current" - somewhere between 2.1.121 and 2.1.131
17 Qua Jun 27 15:02:26 BRT 2001
18 * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
19 *
20 * Parts (C) 1999 David Airlie, airlied@linux.ie
21 * [07-SEP-99] Bugfixes
22 *
23 * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
24 * Converted to new serial core
25 */
26
27#undef DEBUG_DZ
28
29#include <linux/config.h>
30#include <linux/module.h>
31#include <linux/interrupt.h>
32#include <linux/init.h>
33#include <linux/console.h>
34#include <linux/tty.h>
35#include <linux/tty_flip.h>
36#include <linux/serial_core.h>
37#include <linux/serial.h>
38
39#include <asm/bootinfo.h>
40#include <asm/dec/interrupts.h>
41#include <asm/dec/kn01.h>
42#include <asm/dec/kn02.h>
43#include <asm/dec/machtype.h>
44#include <asm/dec/prom.h>
45#include <asm/irq.h>
46#include <asm/system.h>
47#include <asm/uaccess.h>
48
49#define CONSOLE_LINE (3) /* for definition of struct console */
50
51#include "dz.h"
52
53#define DZ_INTR_DEBUG 1
54
55static char *dz_name = "DECstation DZ serial driver version ";
56static char *dz_version = "1.02";
57
58struct dz_port {
59 struct uart_port port;
60 unsigned int cflag;
61};
62
63static struct dz_port dz_ports[DZ_NB_PORT];
64
65#ifdef DEBUG_DZ
66/*
67 * debugging code to send out chars via prom
68 */
69static void debug_console(const char *s, int count)
70{
71 unsigned i;
72
73 for (i = 0; i < count; i++) {
74 if (*s == 10)
75 prom_printf("%c", 13);
76 prom_printf("%c", *s++);
77 }
78}
79#endif
80
81/*
82 * ------------------------------------------------------------
83 * dz_in () and dz_out ()
84 *
85 * These routines are used to access the registers of the DZ
86 * chip, hiding relocation differences between implementation.
87 * ------------------------------------------------------------
88 */
89
90static inline unsigned short dz_in(struct dz_port *dport, unsigned offset)
91{
92 volatile unsigned short *addr =
93 (volatile unsigned short *) (dport->port.membase + offset);
94 return *addr;
95}
96
97static inline void dz_out(struct dz_port *dport, unsigned offset,
98 unsigned short value)
99{
100 volatile unsigned short *addr =
101 (volatile unsigned short *) (dport->port.membase + offset);
102 *addr = value;
103}
104
105/*
106 * ------------------------------------------------------------
107 * rs_stop () and rs_start ()
108 *
109 * These routines are called before setting or resetting
110 * tty->stopped. They enable or disable transmitter interrupts,
111 * as necessary.
112 * ------------------------------------------------------------
113 */
114
Russell Kingb129a8c2005-08-31 10:12:14 +0100115static void dz_stop_tx(struct uart_port *uport)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116{
117 struct dz_port *dport = (struct dz_port *)uport;
118 unsigned short tmp, mask = 1 << dport->port.line;
119 unsigned long flags;
120
121 spin_lock_irqsave(&dport->port.lock, flags);
122 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
123 tmp &= ~mask; /* clear the TX flag */
124 dz_out(dport, DZ_TCR, tmp);
125 spin_unlock_irqrestore(&dport->port.lock, flags);
126}
127
Russell Kingb129a8c2005-08-31 10:12:14 +0100128static void dz_start_tx(struct uart_port *uport)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129{
130 struct dz_port *dport = (struct dz_port *)uport;
131 unsigned short tmp, mask = 1 << dport->port.line;
132 unsigned long flags;
133
134 spin_lock_irqsave(&dport->port.lock, flags);
135 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
136 tmp |= mask; /* set the TX flag */
137 dz_out(dport, DZ_TCR, tmp);
138 spin_unlock_irqrestore(&dport->port.lock, flags);
139}
140
141static void dz_stop_rx(struct uart_port *uport)
142{
143 struct dz_port *dport = (struct dz_port *)uport;
144 unsigned long flags;
145
146 spin_lock_irqsave(&dport->port.lock, flags);
147 dport->cflag &= ~DZ_CREAD;
148 dz_out(dport, DZ_LPR, dport->cflag);
149 spin_unlock_irqrestore(&dport->port.lock, flags);
150}
151
152static void dz_enable_ms(struct uart_port *port)
153{
154 /* nothing to do */
155}
156
157/*
158 * ------------------------------------------------------------
159 * Here starts the interrupt handling routines. All of the
160 * following subroutines are declared as inline and are folded
161 * into dz_interrupt. They were separated out for readability's
162 * sake.
163 *
164 * Note: rs_interrupt() is a "fast" interrupt, which means that it
165 * runs with interrupts turned off. People who may want to modify
166 * rs_interrupt() should try to keep the interrupt handler as fast as
167 * possible. After you are done making modifications, it is not a bad
168 * idea to do:
169 *
170 * make drivers/serial/dz.s
171 *
172 * and look at the resulting assemble code in dz.s.
173 *
174 * ------------------------------------------------------------
175 */
176
177/*
178 * ------------------------------------------------------------
179 * receive_char ()
180 *
181 * This routine deals with inputs from any lines.
182 * ------------------------------------------------------------
183 */
184static inline void dz_receive_chars(struct dz_port *dport)
185{
186 struct tty_struct *tty = NULL;
187 struct uart_icount *icount;
188 int ignore = 0;
189 unsigned short status, tmp;
190 unsigned char ch, flag;
191
192 /* this code is going to be a problem...
193 the call to tty_flip_buffer is going to need
194 to be rethought...
195 */
196 do {
197 status = dz_in(dport, DZ_RBUF);
198
199 /* punt so we don't get duplicate characters */
200 if (!(status & DZ_DVAL))
201 goto ignore_char;
202
203
204 ch = UCHAR(status); /* grab the char */
205 flag = TTY_NORMAL;
206
207#if 0
208 if (info->is_console) {
209 if (ch == 0)
210 return; /* it's a break ... */
211 }
212#endif
213
214 tty = dport->port.info->tty;/* now tty points to the proper dev */
215 icount = &dport->port.icount;
216
217 if (!tty)
218 break;
219 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
220 break;
221
222 icount->rx++;
223
224 /* keep track of the statistics */
225 if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) {
226 if (status & DZ_PERR) /* parity error */
227 icount->parity++;
228 else if (status & DZ_FERR) /* frame error */
229 icount->frame++;
230 if (status & DZ_OERR) /* overrun error */
231 icount->overrun++;
232
233 /* check to see if we should ignore the character
234 and mask off conditions that should be ignored
235 */
236
237 if (status & dport->port.ignore_status_mask) {
238 if (++ignore > 100)
239 break;
240 goto ignore_char;
241 }
242 /* mask off the error conditions we want to ignore */
243 tmp = status & dport->port.read_status_mask;
244
245 if (tmp & DZ_PERR) {
246 flag = TTY_PARITY;
247#ifdef DEBUG_DZ
248 debug_console("PERR\n", 5);
249#endif
250 } else if (tmp & DZ_FERR) {
251 flag = TTY_FRAME;
252#ifdef DEBUG_DZ
253 debug_console("FERR\n", 5);
254#endif
255 }
256 if (tmp & DZ_OERR) {
257#ifdef DEBUG_DZ
258 debug_console("OERR\n", 5);
259#endif
260 tty_insert_flip_char(tty, ch, flag);
261 ch = 0;
262 flag = TTY_OVERRUN;
263 }
264 }
265 tty_insert_flip_char(tty, ch, flag);
266 ignore_char:
267 } while (status & DZ_DVAL);
268
269 if (tty)
270 tty_flip_buffer_push(tty);
271}
272
273/*
274 * ------------------------------------------------------------
275 * transmit_char ()
276 *
277 * This routine deals with outputs to any lines.
278 * ------------------------------------------------------------
279 */
280static inline void dz_transmit_chars(struct dz_port *dport)
281{
282 struct circ_buf *xmit = &dport->port.info->xmit;
283 unsigned char tmp;
284
285 if (dport->port.x_char) { /* XON/XOFF chars */
286 dz_out(dport, DZ_TDR, dport->port.x_char);
287 dport->port.icount.tx++;
288 dport->port.x_char = 0;
289 return;
290 }
291 /* if nothing to do or stopped or hardware stopped */
292 if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100293 dz_stop_tx(&dport->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 return;
295 }
296
297 /*
298 * if something to do ... (rember the dz has no output fifo so we go
299 * one char at a time :-<
300 */
301 tmp = xmit->buf[xmit->tail];
302 xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1);
303 dz_out(dport, DZ_TDR, tmp);
304 dport->port.icount.tx++;
305
306 if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS)
307 uart_write_wakeup(&dport->port);
308
309 /* Are we done */
310 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100311 dz_stop_tx(&dport->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312}
313
314/*
315 * ------------------------------------------------------------
316 * check_modem_status ()
317 *
318 * Only valid for the MODEM line duh !
319 * ------------------------------------------------------------
320 */
321static inline void check_modem_status(struct dz_port *dport)
322{
323 unsigned short status;
324
325 /* if not ne modem line just return */
326 if (dport->port.line != DZ_MODEM)
327 return;
328
329 status = dz_in(dport, DZ_MSR);
330
331 /* it's easy, since DSR2 is the only bit in the register */
332 if (status)
333 dport->port.icount.dsr++;
334}
335
336/*
337 * ------------------------------------------------------------
338 * dz_interrupt ()
339 *
340 * this is the main interrupt routine for the DZ chip.
341 * It deals with the multiple ports.
342 * ------------------------------------------------------------
343 */
344static irqreturn_t dz_interrupt(int irq, void *dev, struct pt_regs *regs)
345{
346 struct dz_port *dport;
347 unsigned short status;
348
349 /* get the reason why we just got an irq */
350 status = dz_in((struct dz_port *)dev, DZ_CSR);
351 dport = &dz_ports[LINE(status)];
352
353 if (status & DZ_RDONE)
354 dz_receive_chars(dport);
355
356 if (status & DZ_TRDY)
357 dz_transmit_chars(dport);
358
359 /* FIXME: what about check modem status??? --rmk */
360
361 return IRQ_HANDLED;
362}
363
364/*
365 * -------------------------------------------------------------------
366 * Here ends the DZ interrupt routines.
367 * -------------------------------------------------------------------
368 */
369
370static unsigned int dz_get_mctrl(struct uart_port *uport)
371{
372 struct dz_port *dport = (struct dz_port *)uport;
373 unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
374
375 if (dport->port.line == DZ_MODEM) {
376 /*
377 * CHECKME: This is a guess from the other code... --rmk
378 */
379 if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR)
380 mctrl &= ~TIOCM_DSR;
381 }
382
383 return mctrl;
384}
385
386static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
387{
388 struct dz_port *dport = (struct dz_port *)uport;
389 unsigned short tmp;
390
391 if (dport->port.line == DZ_MODEM) {
392 tmp = dz_in(dport, DZ_TCR);
393 if (mctrl & TIOCM_DTR)
394 tmp &= ~DZ_MODEM_DTR;
395 else
396 tmp |= DZ_MODEM_DTR;
397 dz_out(dport, DZ_TCR, tmp);
398 }
399}
400
401/*
402 * -------------------------------------------------------------------
403 * startup ()
404 *
405 * various initialization tasks
406 * -------------------------------------------------------------------
407 */
408static int dz_startup(struct uart_port *uport)
409{
410 struct dz_port *dport = (struct dz_port *)uport;
411 unsigned long flags;
412 unsigned short tmp;
413
414 /* The dz lines for the mouse/keyboard must be
415 * opened using their respective drivers.
416 */
417 if ((dport->port.line == DZ_KEYBOARD) ||
418 (dport->port.line == DZ_MOUSE))
419 return -ENODEV;
420
421 spin_lock_irqsave(&dport->port.lock, flags);
422
423 /* enable the interrupt and the scanning */
424 tmp = dz_in(dport, DZ_CSR);
425 tmp |= DZ_RIE | DZ_TIE | DZ_MSE;
426 dz_out(dport, DZ_CSR, tmp);
427
428 spin_unlock_irqrestore(&dport->port.lock, flags);
429
430 return 0;
431}
432
433/*
434 * -------------------------------------------------------------------
435 * shutdown ()
436 *
437 * This routine will shutdown a serial port; interrupts are disabled, and
438 * DTR is dropped if the hangup on close termio flag is on.
439 * -------------------------------------------------------------------
440 */
441static void dz_shutdown(struct uart_port *uport)
442{
Russell Kingb129a8c2005-08-31 10:12:14 +0100443 dz_stop_tx(uport);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444}
445
446/*
447 * get_lsr_info - get line status register info
448 *
449 * Purpose: Let user call ioctl() to get info when the UART physically
450 * is emptied. On bus types like RS485, the transmitter must
451 * release the bus after transmitting. This must be done when
452 * the transmit shift register is empty, not be done when the
453 * transmit holding register is empty. This functionality
454 * allows an RS485 driver to be written in user space.
455 */
456static unsigned int dz_tx_empty(struct uart_port *uport)
457{
458 struct dz_port *dport = (struct dz_port *)uport;
459 unsigned short status = dz_in(dport, DZ_LPR);
460
461 /* FIXME: this appears to be obviously broken --rmk. */
462 return status ? TIOCSER_TEMT : 0;
463}
464
465static void dz_break_ctl(struct uart_port *uport, int break_state)
466{
467 struct dz_port *dport = (struct dz_port *)uport;
468 unsigned long flags;
469 unsigned short tmp, mask = 1 << uport->line;
470
471 spin_lock_irqsave(&uport->lock, flags);
472 tmp = dz_in(dport, DZ_TCR);
473 if (break_state)
474 tmp |= mask;
475 else
476 tmp &= ~mask;
477 dz_out(dport, DZ_TCR, tmp);
478 spin_unlock_irqrestore(&uport->lock, flags);
479}
480
481static void dz_set_termios(struct uart_port *uport, struct termios *termios,
482 struct termios *old_termios)
483{
484 struct dz_port *dport = (struct dz_port *)uport;
485 unsigned long flags;
486 unsigned int cflag, baud;
487
488 cflag = dport->port.line;
489
490 switch (termios->c_cflag & CSIZE) {
491 case CS5:
492 cflag |= DZ_CS5;
493 break;
494 case CS6:
495 cflag |= DZ_CS6;
496 break;
497 case CS7:
498 cflag |= DZ_CS7;
499 break;
500 case CS8:
501 default:
502 cflag |= DZ_CS8;
503 }
504
505 if (termios->c_cflag & CSTOPB)
506 cflag |= DZ_CSTOPB;
507 if (termios->c_cflag & PARENB)
508 cflag |= DZ_PARENB;
509 if (termios->c_cflag & PARODD)
510 cflag |= DZ_PARODD;
511
512 baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
513 switch (baud) {
514 case 50:
515 cflag |= DZ_B50;
516 break;
517 case 75:
518 cflag |= DZ_B75;
519 break;
520 case 110:
521 cflag |= DZ_B110;
522 break;
523 case 134:
524 cflag |= DZ_B134;
525 break;
526 case 150:
527 cflag |= DZ_B150;
528 break;
529 case 300:
530 cflag |= DZ_B300;
531 break;
532 case 600:
533 cflag |= DZ_B600;
534 break;
535 case 1200:
536 cflag |= DZ_B1200;
537 break;
538 case 1800:
539 cflag |= DZ_B1800;
540 break;
541 case 2000:
542 cflag |= DZ_B2000;
543 break;
544 case 2400:
545 cflag |= DZ_B2400;
546 break;
547 case 3600:
548 cflag |= DZ_B3600;
549 break;
550 case 4800:
551 cflag |= DZ_B4800;
552 break;
553 case 7200:
554 cflag |= DZ_B7200;
555 break;
556 case 9600:
557 default:
558 cflag |= DZ_B9600;
559 }
560
561 if (termios->c_cflag & CREAD)
562 cflag |= DZ_RXENAB;
563
564 spin_lock_irqsave(&dport->port.lock, flags);
565
566 dz_out(dport, DZ_LPR, cflag);
567 dport->cflag = cflag;
568
569 /* setup accept flag */
570 dport->port.read_status_mask = DZ_OERR;
571 if (termios->c_iflag & INPCK)
572 dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
573
574 /* characters to ignore */
575 uport->ignore_status_mask = 0;
576 if (termios->c_iflag & IGNPAR)
577 dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
578
579 spin_unlock_irqrestore(&dport->port.lock, flags);
580}
581
582static const char *dz_type(struct uart_port *port)
583{
584 return "DZ";
585}
586
587static void dz_release_port(struct uart_port *port)
588{
589 /* nothing to do */
590}
591
592static int dz_request_port(struct uart_port *port)
593{
594 return 0;
595}
596
597static void dz_config_port(struct uart_port *port, int flags)
598{
599 if (flags & UART_CONFIG_TYPE)
600 port->type = PORT_DZ;
601}
602
603/*
604 * verify the new serial_struct (for TIOCSSERIAL).
605 */
606static int dz_verify_port(struct uart_port *port, struct serial_struct *ser)
607{
608 int ret = 0;
609 if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
610 ret = -EINVAL;
611 if (ser->irq != port->irq)
612 ret = -EINVAL;
613 return ret;
614}
615
616static struct uart_ops dz_ops = {
617 .tx_empty = dz_tx_empty,
618 .get_mctrl = dz_get_mctrl,
619 .set_mctrl = dz_set_mctrl,
620 .stop_tx = dz_stop_tx,
621 .start_tx = dz_start_tx,
622 .stop_rx = dz_stop_rx,
623 .enable_ms = dz_enable_ms,
624 .break_ctl = dz_break_ctl,
625 .startup = dz_startup,
626 .shutdown = dz_shutdown,
627 .set_termios = dz_set_termios,
628 .type = dz_type,
629 .release_port = dz_release_port,
630 .request_port = dz_request_port,
631 .config_port = dz_config_port,
632 .verify_port = dz_verify_port,
633};
634
635static void __init dz_init_ports(void)
636{
637 static int first = 1;
638 struct dz_port *dport;
639 unsigned long base;
640 int i;
641
642 if (!first)
643 return;
644 first = 0;
645
646 if (mips_machtype == MACH_DS23100 ||
647 mips_machtype == MACH_DS5100)
648 base = (unsigned long) KN01_DZ11_BASE;
649 else
650 base = (unsigned long) KN02_DZ11_BASE;
651
652 for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
653 spin_lock_init(&dport->port.lock);
654 dport->port.membase = (char *) base;
655 dport->port.iotype = SERIAL_IO_PORT;
656 dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
657 dport->port.line = i;
658 dport->port.fifosize = 1;
659 dport->port.ops = &dz_ops;
660 dport->port.flags = UPF_BOOT_AUTOCONF;
661 }
662}
663
664static void dz_reset(struct dz_port *dport)
665{
666 dz_out(dport, DZ_CSR, DZ_CLR);
667
668 while (dz_in(dport, DZ_CSR) & DZ_CLR);
669 /* FIXME: cpu_relax? */
670
671 iob();
672
673 /* enable scanning */
674 dz_out(dport, DZ_CSR, DZ_MSE);
675}
676
677#ifdef CONFIG_SERIAL_DZ_CONSOLE
678static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
679{
680 unsigned long flags;
681 int loops = 2500;
682 unsigned short tmp = ch;
683 /* this code sends stuff out to serial device - spinning its
684 wheels and waiting. */
685
686 spin_lock_irqsave(&dport->port.lock, flags);
687
688 /* spin our wheels */
689 while (((dz_in(dport, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--)
690 /* FIXME: cpu_relax, udelay? --rmk */
691 ;
692
693 /* Actually transmit the character. */
694 dz_out(dport, DZ_TDR, tmp);
695
696 spin_unlock_irqrestore(&dport->port.lock, flags);
697}
698/*
699 * -------------------------------------------------------------------
700 * dz_console_print ()
701 *
702 * dz_console_print is registered for printk.
703 * The console must be locked when we get here.
704 * -------------------------------------------------------------------
705 */
706static void dz_console_print(struct console *cons,
707 const char *str,
708 unsigned int count)
709{
710 struct dz_port *dport = &dz_ports[CONSOLE_LINE];
711#ifdef DEBUG_DZ
712 prom_printf((char *) str);
713#endif
714 while (count--) {
715 if (*str == '\n')
716 dz_console_put_char(dport, '\r');
717 dz_console_put_char(dport, *str++);
718 }
719}
720
721static int __init dz_console_setup(struct console *co, char *options)
722{
723 struct dz_port *dport = &dz_ports[CONSOLE_LINE];
724 int baud = 9600;
725 int bits = 8;
726 int parity = 'n';
727 int flow = 'n';
728 int ret;
729 unsigned short mask, tmp;
730
731 if (options)
732 uart_parse_options(options, &baud, &parity, &bits, &flow);
733
734 dz_reset(dport);
735
736 ret = uart_set_options(&dport->port, co, baud, parity, bits, flow);
737 if (ret == 0) {
738 mask = 1 << dport->port.line;
739 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
740 if (!(tmp & mask)) {
741 tmp |= mask; /* set the TX flag */
742 dz_out(dport, DZ_TCR, tmp);
743 }
744 }
745
746 return ret;
747}
748
749static struct console dz_sercons =
750{
751 .name = "ttyS",
752 .write = dz_console_print,
753 .device = uart_console_device,
754 .setup = dz_console_setup,
755 .flags = CON_CONSDEV | CON_PRINTBUFFER,
756 .index = CONSOLE_LINE,
757};
758
759void __init dz_serial_console_init(void)
760{
761 dz_init_ports();
762
763 register_console(&dz_sercons);
764}
765
766#define SERIAL_DZ_CONSOLE &dz_sercons
767#else
768#define SERIAL_DZ_CONSOLE NULL
769#endif /* CONFIG_SERIAL_DZ_CONSOLE */
770
771static struct uart_driver dz_reg = {
772 .owner = THIS_MODULE,
773 .driver_name = "serial",
774#ifdef CONFIG_DEVFS
775 .dev_name = "tts/%d",
776#else
777 .dev_name = "ttyS%d",
778#endif
779 .major = TTY_MAJOR,
780 .minor = 64,
781 .nr = DZ_NB_PORT,
782 .cons = SERIAL_DZ_CONSOLE,
783};
784
785int __init dz_init(void)
786{
787 unsigned long flags;
788 int ret, i;
789
790 printk("%s%s\n", dz_name, dz_version);
791
792 dz_init_ports();
793
794 save_flags(flags);
795 cli();
796
797#ifndef CONFIG_SERIAL_DZ_CONSOLE
798 /* reset the chip */
799 dz_reset(&dz_ports[0]);
800#endif
801
802 /* order matters here... the trick is that flags
803 is updated... in request_irq - to immediatedly obliterate
804 it is unwise. */
805 restore_flags(flags);
806
807 if (request_irq(dz_ports[0].port.irq, dz_interrupt,
808 SA_INTERRUPT, "DZ", &dz_ports[0]))
809 panic("Unable to register DZ interrupt");
810
811 ret = uart_register_driver(&dz_reg);
812 if (ret != 0)
813 return ret;
814
815 for (i = 0; i < DZ_NB_PORT; i++)
816 uart_add_one_port(&dz_reg, &dz_ports[i].port);
817
818 return ret;
819}
820
821MODULE_DESCRIPTION("DECstation DZ serial driver");
822MODULE_LICENSE("GPL");