blob: b7e303d28caff3d5eeb4cceade89c6a66047fdfa [file] [log] [blame]
Brian Norris0d486802015-05-20 17:18:40 -07001/*
2 * Broadcom SATA3 AHCI Controller PHY Driver
3 *
4 * Copyright © 2009-2015 Broadcom Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2, or (at your option)
9 * any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17#include <linux/device.h>
18#include <linux/init.h>
19#include <linux/interrupt.h>
20#include <linux/io.h>
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <linux/of.h>
24#include <linux/phy/phy.h>
25#include <linux/platform_device.h>
26
27#define SATA_MDIO_BANK_OFFSET 0x23c
28#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
29#define SATA_MDIO_REG_SPACE_SIZE 0x1000
30#define SATA_MDIO_REG_LENGTH 0x1f00
31
32#define MAX_PORTS 2
33
34/* Register offset between PHYs in PCB space */
35#define SATA_MDIO_REG_SPACE_SIZE 0x1000
36
37struct brcm_sata_port {
38 int portnum;
39 struct phy *phy;
40 struct brcm_sata_phy *phy_priv;
41 bool ssc_en;
42};
43
44struct brcm_sata_phy {
45 struct device *dev;
46 void __iomem *phy_base;
47
48 struct brcm_sata_port phys[MAX_PORTS];
49};
50
51enum sata_mdio_phy_regs_28nm {
52 PLL_REG_BANK_0 = 0x50,
53 PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
54
55 TXPMD_REG_BANK = 0x1a0,
56 TXPMD_CONTROL1 = 0x81,
57 TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
58 TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1),
59 TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82,
60 TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83,
61 TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
62 TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
63 TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
64};
65
66static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
67{
68 struct brcm_sata_phy *priv = port->phy_priv;
69
70 return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
71}
72
73static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
74 u32 msk, u32 value)
75{
76 u32 tmp;
77
78 writel(bank, addr + SATA_MDIO_BANK_OFFSET);
79 tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
80 tmp = (tmp & msk) | value;
81 writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
82}
83
84/* These defaults were characterized by H/W group */
85#define FMIN_VAL_DEFAULT 0x3df
86#define FMAX_VAL_DEFAULT 0x3df
87#define FMAX_VAL_SSC 0x83
88
89static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
90{
91 void __iomem *base = brcm_sata_phy_base(port);
92 struct brcm_sata_phy *priv = port->phy_priv;
93 u32 tmp;
94
95 /* override the TX spread spectrum setting */
96 tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
97 brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
98
99 /* set fixed min freq */
100 brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
101 ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
102 FMIN_VAL_DEFAULT);
103
104 /* set fixed max freq depending on SSC config */
105 if (port->ssc_en) {
106 dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
107 tmp = FMAX_VAL_SSC;
108 } else {
109 tmp = FMAX_VAL_DEFAULT;
110 }
111
112 brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
113 ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
114}
115
116static int brcm_sata_phy_init(struct phy *phy)
117{
118 struct brcm_sata_port *port = phy_get_drvdata(phy);
119
120 brcm_sata_cfg_ssc_28nm(port);
121
122 return 0;
123}
124
125static struct phy_ops phy_ops_28nm = {
126 .init = brcm_sata_phy_init,
127 .owner = THIS_MODULE,
128};
129
130static const struct of_device_id brcm_sata_phy_of_match[] = {
131 { .compatible = "brcm,bcm7445-sata-phy" },
132 {},
133};
134MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
135
136static int brcm_sata_phy_probe(struct platform_device *pdev)
137{
138 struct device *dev = &pdev->dev;
139 struct device_node *dn = dev->of_node, *child;
140 struct brcm_sata_phy *priv;
141 struct resource *res;
142 struct phy_provider *provider;
143 int count = 0;
144
145 if (of_get_child_count(dn) == 0)
146 return -ENODEV;
147
148 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
149 if (!priv)
150 return -ENOMEM;
151 dev_set_drvdata(dev, priv);
152 priv->dev = dev;
153
154 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
155 priv->phy_base = devm_ioremap_resource(dev, res);
156 if (IS_ERR(priv->phy_base))
157 return PTR_ERR(priv->phy_base);
158
159 for_each_available_child_of_node(dn, child) {
160 unsigned int id;
161 struct brcm_sata_port *port;
162
163 if (of_property_read_u32(child, "reg", &id)) {
164 dev_err(dev, "missing reg property in node %s\n",
165 child->name);
166 return -EINVAL;
167 }
168
169 if (id >= MAX_PORTS) {
170 dev_err(dev, "invalid reg: %u\n", id);
171 return -EINVAL;
172 }
173 if (priv->phys[id].phy) {
174 dev_err(dev, "already registered port %u\n", id);
175 return -EINVAL;
176 }
177
178 port = &priv->phys[id];
179 port->portnum = id;
180 port->phy_priv = priv;
181 port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
182 port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
183 if (IS_ERR(port->phy)) {
184 dev_err(dev, "failed to create PHY\n");
185 return PTR_ERR(port->phy);
186 }
187
188 phy_set_drvdata(port->phy, port);
189 count++;
190 }
191
192 provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
193 if (IS_ERR(provider)) {
194 dev_err(dev, "could not register PHY provider\n");
195 return PTR_ERR(provider);
196 }
197
198 dev_info(dev, "registered %d port(s)\n", count);
199
200 return 0;
201}
202
203static struct platform_driver brcm_sata_phy_driver = {
204 .probe = brcm_sata_phy_probe,
205 .driver = {
206 .of_match_table = brcm_sata_phy_of_match,
207 .name = "brcmstb-sata-phy",
208 }
209};
210module_platform_driver(brcm_sata_phy_driver);
211
212MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
213MODULE_LICENSE("GPL");
214MODULE_AUTHOR("Marc Carino");
215MODULE_AUTHOR("Brian Norris");
216MODULE_ALIAS("platform:phy-brcmstb-sata");