blob: 48e8461057ba9346442aa5c72d6772b190dcf4c9 [file] [log] [blame]
Alex Nixonb5401a92010-03-18 16:31:34 -04001/*
Konrad Rzeszutek Wilk996c34a2011-06-06 12:22:23 -04002 * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
3 * initial domain support. We also handle the DSDT _PRT callbacks for GSI's
4 * used in HVM and initial domain mode (PV does not parse ACPI, so it has no
5 * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
6 * 0xcf8 PCI configuration read/write.
Alex Nixonb5401a92010-03-18 16:31:34 -04007 *
8 * Author: Ryan Wilson <hap9@epoch.ncsc.mil>
Konrad Rzeszutek Wilk996c34a2011-06-06 12:22:23 -04009 * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
10 * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Alex Nixonb5401a92010-03-18 16:31:34 -040011 */
12#include <linux/module.h>
13#include <linux/init.h>
14#include <linux/pci.h>
15#include <linux/acpi.h>
16
17#include <linux/io.h>
Stefano Stabellini0e058e52010-10-21 17:40:08 +010018#include <asm/io_apic.h>
Alex Nixonb5401a92010-03-18 16:31:34 -040019#include <asm/pci_x86.h>
20
21#include <asm/xen/hypervisor.h>
22
Stefano Stabellini3942b742010-06-24 17:50:18 +010023#include <xen/features.h>
Alex Nixonb5401a92010-03-18 16:31:34 -040024#include <xen/events.h>
25#include <asm/xen/pci.h>
26
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -040027static int xen_pcifront_enable_irq(struct pci_dev *dev)
28{
29 int rc;
30 int share = 1;
31 int pirq;
32 u8 gsi;
33
34 rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
35 if (rc < 0) {
36 dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
37 rc);
38 return rc;
39 }
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -040040 /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
41 pirq = gsi;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -040042
43 if (gsi < NR_IRQS_LEGACY)
44 share = 0;
45
46 rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
47 if (rc < 0) {
48 dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
49 gsi, pirq, rc);
50 return rc;
51 }
52
53 dev->irq = rc;
54 dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
55 return 0;
56}
57
Stefano Stabellini42a1de52010-06-24 16:42:04 +010058#ifdef CONFIG_ACPI
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -040059static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -040060 bool set_pirq)
Stefano Stabellini42a1de52010-06-24 16:42:04 +010061{
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -040062 int rc, pirq = -1, irq = -1;
Stefano Stabellini42a1de52010-06-24 16:42:04 +010063 struct physdev_map_pirq map_irq;
64 int shareable = 0;
65 char *name;
66
Stefano Stabellini68c2c392012-05-21 16:54:10 +010067 irq = xen_irq_from_gsi(gsi);
68 if (irq > 0)
69 return irq;
70
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -040071 if (set_pirq)
72 pirq = gsi;
73
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +010074 map_irq.domid = DOMID_SELF;
75 map_irq.type = MAP_PIRQ_TYPE_GSI;
76 map_irq.index = gsi;
Ian Campbellf4d06352011-03-10 16:08:07 +000077 map_irq.pirq = pirq;
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +010078
79 rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
80 if (rc) {
81 printk(KERN_WARNING "xen map irq failed %d\n", rc);
82 return -1;
83 }
84
Konrad Rzeszutek Wilk30bd35e2011-07-06 10:48:22 -040085 if (triggering == ACPI_EDGE_SENSITIVE) {
86 shareable = 0;
87 name = "ioapic-edge";
88 } else {
89 shareable = 1;
90 name = "ioapic-level";
91 }
92
93 if (gsi_override >= 0)
94 gsi = gsi_override;
95
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -040096 irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
Konrad Rzeszutek Wilk30bd35e2011-07-06 10:48:22 -040097 if (irq < 0)
98 goto out;
99
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -0400100 printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100101out:
102 return irq;
103}
104
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -0400105static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
106 int trigger, int polarity)
107{
108 if (!xen_hvm_domain())
109 return -1;
110
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -0400111 return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
112 false /* no mapping of GSI to PIRQ */);
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -0400113}
114
115#ifdef CONFIG_XEN_DOM0
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400116static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100117{
118 int rc, irq;
119 struct physdev_setup_gsi setup_gsi;
120
121 if (!xen_pv_domain())
122 return -1;
123
124 printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
125 gsi, triggering, polarity);
126
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -0400127 irq = xen_register_pirq(gsi, gsi_override, triggering, true);
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100128
129 setup_gsi.gsi = gsi;
130 setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
131 setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
132
133 rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
134 if (rc == -EEXIST)
135 printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
136 else if (rc) {
137 printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
138 gsi, rc);
139 }
140
141 return irq;
142}
143
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400144static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
145 int trigger, int polarity)
146{
147 return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
148}
149#endif
Konrad Rzeszutek Wilkd92edd82011-07-06 10:41:47 -0400150#endif
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400151
152#if defined(CONFIG_PCI_MSI)
153#include <linux/msi.h>
154#include <asm/msidef.h>
155
156struct xen_pci_frontend_ops *xen_pci_frontend;
157EXPORT_SYMBOL_GPL(xen_pci_frontend);
158
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400159static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
160{
161 int irq, ret, i;
162 struct msi_desc *msidesc;
163 int *v;
164
Konrad Rzeszutek Wilk884ac292013-02-28 09:05:41 -0500165 if (type == PCI_CAP_ID_MSI && nvec > 1)
166 return 1;
167
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400168 v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
169 if (!v)
170 return -ENOMEM;
171
172 if (type == PCI_CAP_ID_MSIX)
173 ret = xen_pci_frontend_enable_msix(dev, v, nvec);
174 else
175 ret = xen_pci_frontend_enable_msi(dev, v);
176 if (ret)
177 goto error;
178 i = 0;
179 list_for_each_entry(msidesc, &dev->msi_list, list) {
Jan Beulichdec02de2013-04-03 15:52:50 +0100180 irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i],
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400181 (type == PCI_CAP_ID_MSIX) ?
182 "pcifront-msi-x" :
183 "pcifront-msi",
184 DOMID_SELF);
Konrad Rzeszutek Wilke6599222011-09-29 13:26:45 -0400185 if (irq < 0) {
186 ret = irq;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400187 goto free;
Konrad Rzeszutek Wilke6599222011-09-29 13:26:45 -0400188 }
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400189 i++;
190 }
191 kfree(v);
192 return 0;
193
194error:
195 dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
196free:
197 kfree(v);
198 return ret;
199}
200
201#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
202 MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
203
204static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
205 struct msi_msg *msg)
206{
207 /* We set vector == 0 to tell the hypervisor we don't care about it,
208 * but we want a pirq setup instead.
209 * We use the dest_id field to pass the pirq that we want. */
210 msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq);
211 msg->address_lo =
212 MSI_ADDR_BASE_LO |
213 MSI_ADDR_DEST_MODE_PHYSICAL |
214 MSI_ADDR_REDIRECTION_CPU |
215 MSI_ADDR_DEST_ID(pirq);
216
217 msg->data = XEN_PIRQ_MSI_DATA;
218}
219
220static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
221{
222 int irq, pirq;
223 struct msi_desc *msidesc;
224 struct msi_msg msg;
225
Konrad Rzeszutek Wilk884ac292013-02-28 09:05:41 -0500226 if (type == PCI_CAP_ID_MSI && nvec > 1)
227 return 1;
228
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400229 list_for_each_entry(msidesc, &dev->msi_list, list) {
230 __read_msi_msg(msidesc, &msg);
231 pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
232 ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
233 if (msg.data != XEN_PIRQ_MSI_DATA ||
234 xen_irq_from_pirq(pirq) < 0) {
235 pirq = xen_allocate_pirq_msi(dev, msidesc);
Konrad Rzeszutek Wilke6599222011-09-29 13:26:45 -0400236 if (pirq < 0) {
237 irq = -ENODEV;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400238 goto error;
Konrad Rzeszutek Wilke6599222011-09-29 13:26:45 -0400239 }
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400240 xen_msi_compose_msg(dev, pirq, &msg);
241 __write_msi_msg(msidesc, &msg);
242 dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
243 } else {
244 dev_dbg(&dev->dev,
245 "xen: msi already bound to pirq=%d\n", pirq);
246 }
Jan Beulichdec02de2013-04-03 15:52:50 +0100247 irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq,
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400248 (type == PCI_CAP_ID_MSIX) ?
249 "msi-x" : "msi",
250 DOMID_SELF);
251 if (irq < 0)
252 goto error;
253 dev_dbg(&dev->dev,
254 "xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
255 }
256 return 0;
257
258error:
259 dev_err(&dev->dev,
260 "Xen PCI frontend has not registered MSI/MSI-X support!\n");
Konrad Rzeszutek Wilke6599222011-09-29 13:26:45 -0400261 return irq;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400262}
263
264#ifdef CONFIG_XEN_DOM0
Jan Beulich55e901f2011-09-22 09:17:57 +0100265static bool __read_mostly pci_seg_supported = true;
Stefano Stabellini809f9262010-07-01 17:10:39 +0100266
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400267static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
268{
269 int ret = 0;
270 struct msi_desc *msidesc;
271
Konrad Rzeszutek Wilk884ac292013-02-28 09:05:41 -0500272 if (type == PCI_CAP_ID_MSI && nvec > 1)
273 return 1;
274
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400275 list_for_each_entry(msidesc, &dev->msi_list, list) {
276 struct physdev_map_pirq map_irq;
277 domid_t domid;
278
279 domid = ret = xen_find_device_domain_owner(dev);
280 /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
281 * hence check ret value for < 0. */
282 if (ret < 0)
283 domid = DOMID_SELF;
284
285 memset(&map_irq, 0, sizeof(map_irq));
286 map_irq.domid = domid;
Jan Beulich55e901f2011-09-22 09:17:57 +0100287 map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400288 map_irq.index = -1;
289 map_irq.pirq = -1;
Jan Beulich55e901f2011-09-22 09:17:57 +0100290 map_irq.bus = dev->bus->number |
291 (pci_domain_nr(dev->bus) << 16);
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400292 map_irq.devfn = dev->devfn;
293
294 if (type == PCI_CAP_ID_MSIX) {
295 int pos;
296 u32 table_offset, bir;
297
Bjorn Helgaas7c866172013-04-22 17:12:28 -0600298 pos = dev->msix_cap;
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400299 pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
300 &table_offset);
Bjorn Helgaas4be6bfe2013-04-22 17:12:21 -0600301 bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400302
303 map_irq.table_base = pci_resource_start(dev, bir);
304 map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
305 }
306
Jan Beulich55e901f2011-09-22 09:17:57 +0100307 ret = -EINVAL;
308 if (pci_seg_supported)
309 ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
310 &map_irq);
311 if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
312 map_irq.type = MAP_PIRQ_TYPE_MSI;
313 map_irq.index = -1;
314 map_irq.pirq = -1;
315 map_irq.bus = dev->bus->number;
316 ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
317 &map_irq);
318 if (ret != -EINVAL)
319 pci_seg_supported = false;
320 }
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400321 if (ret) {
322 dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
323 ret, domid);
324 goto out;
325 }
326
327 ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
Jan Beulichdec02de2013-04-03 15:52:50 +0100328 map_irq.pirq,
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400329 (type == PCI_CAP_ID_MSIX) ?
330 "msi-x" : "msi",
331 domid);
332 if (ret < 0)
333 goto out;
334 }
335 ret = 0;
336out:
337 return ret;
338}
Tang Liang8605c682011-12-08 17:36:39 +0800339
340static void xen_initdom_restore_msi_irqs(struct pci_dev *dev, int irq)
341{
342 int ret = 0;
343
344 if (pci_seg_supported) {
345 struct physdev_pci_device restore_ext;
346
347 restore_ext.seg = pci_domain_nr(dev->bus);
348 restore_ext.bus = dev->bus->number;
349 restore_ext.devfn = dev->devfn;
350 ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext,
351 &restore_ext);
352 if (ret == -ENOSYS)
353 pci_seg_supported = false;
354 WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret);
355 }
356 if (!pci_seg_supported) {
357 struct physdev_restore_msi restore;
358
359 restore.bus = dev->bus->number;
360 restore.devfn = dev->devfn;
361 ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore);
362 WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret);
363 }
364}
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400365#endif
366
367static void xen_teardown_msi_irqs(struct pci_dev *dev)
368{
369 struct msi_desc *msidesc;
370
371 msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
372 if (msidesc->msi_attrib.is_msix)
373 xen_pci_frontend_disable_msix(dev);
374 else
375 xen_pci_frontend_disable_msi(dev);
376
377 /* Free the IRQ's and the msidesc using the generic code. */
378 default_teardown_msi_irqs(dev);
379}
380
381static void xen_teardown_msi_irq(unsigned int irq)
382{
383 xen_destroy_irq(irq);
384}
385
386#endif
387
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400388int __init pci_xen_init(void)
389{
390 if (!xen_pv_domain() || xen_initial_domain())
391 return -ENODEV;
392
393 printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
394
395 pcibios_set_cache_line_size();
396
397 pcibios_enable_irq = xen_pcifront_enable_irq;
398 pcibios_disable_irq = NULL;
399
400#ifdef CONFIG_ACPI
401 /* Keep ACPI out of the picture */
402 acpi_noirq = 1;
403#endif
404
405#ifdef CONFIG_PCI_MSI
406 x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
407 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
408 x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
409#endif
410 return 0;
411}
412
413int __init pci_xen_hvm_init(void)
414{
Stefano Stabellini207d5432012-01-30 14:31:46 +0000415 if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
Konrad Rzeszutek Wilkfef6e262011-07-06 10:16:21 -0400416 return 0;
417
418#ifdef CONFIG_ACPI
419 /*
420 * We don't want to change the actual ACPI delivery model,
421 * just how GSIs get registered.
422 */
423 __acpi_register_gsi = acpi_register_gsi_xen_hvm;
424#endif
425
426#ifdef CONFIG_PCI_MSI
427 x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
428 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
429#endif
430 return 0;
431}
432
433#ifdef CONFIG_XEN_DOM0
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100434static __init void xen_setup_acpi_sci(void)
435{
436 int rc;
437 int trigger, polarity;
438 int gsi = acpi_sci_override_gsi;
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400439 int irq = -1;
440 int gsi_override = -1;
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100441
442 if (!gsi)
443 return;
444
445 rc = acpi_get_override_irq(gsi, &trigger, &polarity);
446 if (rc) {
447 printk(KERN_WARNING "xen: acpi_get_override_irq failed for acpi"
448 " sci, rc=%d\n", rc);
449 return;
450 }
451 trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
452 polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
Konrad Rzeszutek Wilk996c34a2011-06-06 12:22:23 -0400453
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100454 printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
455 "polarity=%d\n", gsi, trigger, polarity);
456
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400457 /* Before we bind the GSI to a Linux IRQ, check whether
458 * we need to override it with bus_irq (IRQ) value. Usually for
459 * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
460 * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
461 * but there are oddballs where the IRQ != GSI:
462 * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
463 * which ends up being: gsi_to_irq[9] == 20
464 * (which is what acpi_gsi_to_irq ends up calling when starting the
465 * the ACPI interpreter and keels over since IRQ 9 has not been
466 * setup as we had setup IRQ 20 for it).
467 */
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400468 if (acpi_gsi_to_irq(gsi, &irq) == 0) {
Konrad Rzeszutek Wilk97ffab12011-07-06 13:03:35 -0400469 /* Use the provided value if it's valid. */
470 if (irq >= 0)
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400471 gsi_override = irq;
472 }
473
474 gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100475 printk(KERN_INFO "xen: acpi sci %d\n", gsi);
476
477 return;
478}
Konrad Rzeszutek Wilka0ee0562011-06-09 09:49:13 -0400479
480int __init pci_xen_initial_domain(void)
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100481{
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -0400482 int irq;
Konrad Rzeszutek Wilka0ee0562011-06-09 09:49:13 -0400483
Qing Hef731e3ef2010-10-11 15:30:09 +0100484#ifdef CONFIG_PCI_MSI
485 x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
486 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
Tang Liang8605c682011-12-08 17:36:39 +0800487 x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
Qing Hef731e3ef2010-10-11 15:30:09 +0100488#endif
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100489 xen_setup_acpi_sci();
490 __acpi_register_gsi = acpi_register_gsi_xen;
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100491 /* Pre-allocate legacy irqs */
492 for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
493 int trigger, polarity;
494
495 if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
496 continue;
497
Konrad Rzeszutek Wilkee339fe2011-07-06 09:43:16 -0400498 xen_register_pirq(irq, -1 /* no GSI override */,
Konrad Rzeszutek Wilked89eb62011-07-06 12:42:43 -0400499 trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -0400500 true /* Map GSI to PIRQ */);
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100501 }
Konrad Rzeszutek Wilk9b6519d2011-06-06 14:20:35 -0400502 if (0 == nr_ioapics) {
Konrad Rzeszutek Wilk78316ad2011-07-06 15:15:23 -0400503 for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
504 xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
Konrad Rzeszutek Wilk9b6519d2011-06-06 14:20:35 -0400505 }
Konrad Rzeszutek Wilka0ee0562011-06-09 09:49:13 -0400506 return 0;
Jeremy Fitzhardinge38aa66f2010-09-02 14:51:39 +0100507}
Konrad Rzeszutek Wilkc55fa782010-11-08 14:13:35 -0500508
509struct xen_device_domain_owner {
510 domid_t domain;
511 struct pci_dev *dev;
512 struct list_head list;
513};
514
515static DEFINE_SPINLOCK(dev_domain_list_spinlock);
516static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
517
518static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
519{
520 struct xen_device_domain_owner *owner;
521
522 list_for_each_entry(owner, &dev_domain_list, list) {
523 if (owner->dev == dev)
524 return owner;
525 }
526 return NULL;
527}
528
529int xen_find_device_domain_owner(struct pci_dev *dev)
530{
531 struct xen_device_domain_owner *owner;
532 int domain = -ENODEV;
533
534 spin_lock(&dev_domain_list_spinlock);
535 owner = find_device(dev);
536 if (owner)
537 domain = owner->domain;
538 spin_unlock(&dev_domain_list_spinlock);
539 return domain;
540}
541EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
542
543int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
544{
545 struct xen_device_domain_owner *owner;
546
547 owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
548 if (!owner)
549 return -ENODEV;
550
551 spin_lock(&dev_domain_list_spinlock);
552 if (find_device(dev)) {
553 spin_unlock(&dev_domain_list_spinlock);
554 kfree(owner);
555 return -EEXIST;
556 }
557 owner->domain = domain;
558 owner->dev = dev;
559 list_add_tail(&owner->list, &dev_domain_list);
560 spin_unlock(&dev_domain_list_spinlock);
561 return 0;
562}
563EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
564
565int xen_unregister_device_domain_owner(struct pci_dev *dev)
566{
567 struct xen_device_domain_owner *owner;
568
569 spin_lock(&dev_domain_list_spinlock);
570 owner = find_device(dev);
571 if (!owner) {
572 spin_unlock(&dev_domain_list_spinlock);
573 return -ENODEV;
574 }
575 list_del(&owner->list);
576 spin_unlock(&dev_domain_list_spinlock);
577 kfree(owner);
578 return 0;
579}
580EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
Konrad Rzeszutek Wilk7c1bfd62011-05-16 13:47:30 -0400581#endif