blob: de27b576c13d5afe1dcbf83d66993bc05e4dc657 [file] [log] [blame]
Paul Gortmaker0e0fffe2008-01-24 18:41:27 -05001/*
2 * Wind River SBC8548 setup and early boot code.
3 *
4 * Copyright 2007 Wind River Systems Inc.
5 *
6 * By Paul Gortmaker (see MAINTAINERS for contact information)
7 *
8 * Based largely on the MPC8548CDS support - Copyright 2005 Freescale Inc.
9 *
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 */
16
17#include <linux/stddef.h>
18#include <linux/kernel.h>
19#include <linux/init.h>
20#include <linux/errno.h>
21#include <linux/reboot.h>
22#include <linux/pci.h>
23#include <linux/kdev_t.h>
24#include <linux/major.h>
25#include <linux/console.h>
26#include <linux/delay.h>
27#include <linux/seq_file.h>
28#include <linux/initrd.h>
29#include <linux/module.h>
30#include <linux/interrupt.h>
31#include <linux/fsl_devices.h>
32#include <linux/of_platform.h>
33
34#include <asm/system.h>
35#include <asm/pgtable.h>
36#include <asm/page.h>
37#include <asm/atomic.h>
38#include <asm/time.h>
39#include <asm/io.h>
40#include <asm/machdep.h>
41#include <asm/ipic.h>
42#include <asm/pci-bridge.h>
43#include <asm/irq.h>
44#include <mm/mmu_decl.h>
45#include <asm/prom.h>
46#include <asm/udbg.h>
47#include <asm/mpic.h>
48
49#include <sysdev/fsl_soc.h>
50#include <sysdev/fsl_pci.h>
51
52static void __init sbc8548_pic_init(void)
53{
54 struct mpic *mpic;
55 struct resource r;
56 struct device_node *np = NULL;
57
58 np = of_find_node_by_type(np, "open-pic");
59
60 if (np == NULL) {
61 printk(KERN_ERR "Could not find open-pic node\n");
62 return;
63 }
64
65 if (of_address_to_resource(np, 0, &r)) {
66 printk(KERN_ERR "Failed to map mpic register space\n");
67 of_node_put(np);
68 return;
69 }
70
71 mpic = mpic_alloc(np, r.start,
72 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
73 0, 256, " OpenPIC ");
74 BUG_ON(mpic == NULL);
75
76 /* Return the mpic node */
77 of_node_put(np);
78
79 mpic_init(mpic);
80}
81
82/*
83 * Setup the architecture
84 */
85static void __init sbc8548_setup_arch(void)
86{
87#ifdef CONFIG_PCI
88 struct device_node *np;
89#endif
90
91 if (ppc_md.progress)
92 ppc_md.progress("sbc8548_setup_arch()", 0);
93
94#ifdef CONFIG_PCI
95 for_each_node_by_type(np, "pci") {
96 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
97 of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
98 struct resource rsrc;
99 of_address_to_resource(np, 0, &rsrc);
100 if ((rsrc.start & 0xfffff) == 0x8000)
101 fsl_add_bridge(np, 1);
102 else
103 fsl_add_bridge(np, 0);
104 }
105 }
106#endif
107}
108
109static void sbc8548_show_cpuinfo(struct seq_file *m)
110{
111 uint pvid, svid, phid1;
112 uint memsize = total_memory;
113
114 pvid = mfspr(SPRN_PVR);
115 svid = mfspr(SPRN_SVR);
116
117 seq_printf(m, "Vendor\t\t: Wind River\n");
118 seq_printf(m, "Machine\t\t: SBC8548\n");
119 seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
120 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
121
122 /* Display cpu Pll setting */
123 phid1 = mfspr(SPRN_HID1);
124 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
125
126 /* Display the amount of memory */
127 seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
128}
129
130static struct of_device_id __initdata of_bus_ids[] = {
131 { .name = "soc", },
132 { .type = "soc", },
133 {},
134};
135
136static int __init declare_of_platform_devices(void)
137{
138 if (!machine_is(sbc8548))
139 return 0;
140
141 of_platform_bus_probe(NULL, of_bus_ids, NULL);
142 return 0;
143}
144device_initcall(declare_of_platform_devices);
145
146/*
147 * Called very early, device-tree isn't unflattened
148 */
149static int __init sbc8548_probe(void)
150{
151 unsigned long root = of_get_flat_dt_root();
152
153 return of_flat_dt_is_compatible(root, "SBC8548");
154}
155
156define_machine(sbc8548) {
157 .name = "SBC8548",
158 .probe = sbc8548_probe,
159 .setup_arch = sbc8548_setup_arch,
160 .init_IRQ = sbc8548_pic_init,
161 .show_cpuinfo = sbc8548_show_cpuinfo,
162 .get_irq = mpic_get_irq,
163 .restart = fsl_rstcr_restart,
164#ifdef CONFIG_PCI
165 .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
166#endif
167 .calibrate_decr = generic_calibrate_decr,
168 .progress = udbg_progress,
169};