blob: a216b46677429402168c587c638cc1d710632960 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Misc strange devices
3#
4
Fabio Estevam7c5763b2012-01-24 02:11:25 -02005menu "Misc devices"
6
Jean Delvareff606672011-03-21 17:59:36 +01007config SENSORS_LIS3LV02D
8 tristate
9 depends on INPUT
10 select INPUT_POLLDEV
11 default n
12
Michael Hennerich4eb174b2009-12-14 18:00:15 -080013config AD525X_DPOT
Michael Hennerich6c536e42010-05-24 14:33:14 -070014 tristate "Analog Devices Digital Potentiometers"
15 depends on (I2C || SPI) && SYSFS
Michael Hennerich4eb174b2009-12-14 18:00:15 -080016 help
17 If you say yes here, you get support for the Analog Devices
Michael Hennerich6c536e42010-05-24 14:33:14 -070018 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
Michael Henneriche3ae684762010-05-24 14:33:15 -070022 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
Michael Hennerichc74cba62010-05-24 14:33:15 -070023 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
Michael Hennericha4bd3942010-10-26 14:22:36 -070024 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
25 AD5271, AD5272, AD5274
Michael Hennerich4eb174b2009-12-14 18:00:15 -080026 digital potentiometer chips.
27
28 See Documentation/misc-devices/ad525x_dpot.txt for the
29 userspace interface.
30
31 This driver can also be built as a module. If so, the module
32 will be called ad525x_dpot.
33
Michael Hennerich6c536e42010-05-24 14:33:14 -070034config AD525X_DPOT_I2C
35 tristate "support I2C bus connection"
36 depends on AD525X_DPOT && I2C
37 help
38 Say Y here if you have a digital potentiometers hooked to an I2C bus.
39
40 To compile this driver as a module, choose M here: the
41 module will be called ad525x_dpot-i2c.
42
43config AD525X_DPOT_SPI
44 tristate "support SPI bus connection"
45 depends on AD525X_DPOT && SPI_MASTER
46 help
47 Say Y here if you have a digital potentiometers hooked to an SPI bus.
48
49 If unsure, say N (but it's safe to say "Y").
50
51 To compile this driver as a module, choose M here: the
52 module will be called ad525x_dpot-spi.
53
David Brownell2a341f52008-02-22 17:23:23 -080054config ATMEL_TCLIB
55 bool "Atmel AT32/AT91 Timer/Counter Library"
56 depends on (AVR32 || ARCH_AT91)
57 help
58 Select this if you want a library to allocate the Timer/Counter
59 blocks found on many Atmel processors. This facilitates using
60 these blocks by different drivers despite processor differences.
61
David Brownell4d243f92008-02-22 17:28:37 -080062config ATMEL_TCB_CLKSRC
63 bool "TC Block Clocksource"
John Stultz592913e2010-07-13 17:56:20 -070064 depends on ATMEL_TCLIB
David Brownell4d243f92008-02-22 17:28:37 -080065 default y
66 help
67 Select this to get a high precision clocksource based on a
68 TC block with a 5+ MHz base clock rate. Two timer channels
69 are combined to make a single 32-bit timer.
70
71 When GENERIC_CLOCKEVENTS is defined, the third timer channel
72 may be used as a clock event device supporting oneshot mode
73 (delays of up to two seconds) based on the 32 KiHz clock.
74
75config ATMEL_TCB_CLKSRC_BLOCK
76 int
77 depends on ATMEL_TCB_CLKSRC
Nicolas Ferre93730902014-11-19 11:15:02 +010078 prompt "TC Block" if CPU_AT32AP700X
David Brownell4d243f92008-02-22 17:28:37 -080079 default 0
80 range 0 1
81 help
82 Some chips provide more than one TC block, so you have the
83 choice of which one to use for the clock framework. The other
84 TC can be used for other purposes, such as PWM generation and
85 interval timing.
86
Jiri Kosina54f69b92013-03-21 00:21:21 +010087config DUMMY_IRQ
88 tristate "Dummy IRQ handler"
89 default n
90 ---help---
91 This module accepts a single 'irq' parameter, which it should register for.
92 The sole purpose of this module is to help with debugging of systems on
93 which spurious IRQs would happen on disabled IRQ vector.
94
Linus Torvalds1da177e2005-04-16 15:20:36 -070095config IBM_ASM
96 tristate "Device driver for IBM RSA service processor"
Greg Kroah-Hartman65929212012-09-18 16:14:53 +010097 depends on X86 && PCI && INPUT
Randy Dunlap75339d82016-01-20 14:58:21 -080098 depends on SERIAL_8250 || SERIAL_8250=n
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 ---help---
100 This option enables device driver support for in-band access to the
101 IBM RSA (Condor) service processor in eServer xSeries systems.
102 The ibmasm device driver allows user space application to access
103 ASM (Advanced Systems Management) functions on the service
104 processor. The driver is meant to be used in conjunction with
105 a user space API.
106 The ibmasm driver also enables the OS to use the UART on the
107 service processor board as a regular serial port. To make use of
108 this feature serial driver support (CONFIG_SERIAL_8250) must be
109 enabled.
Alex Dubovf9565122006-10-04 02:15:38 -0700110
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 WARNING: This software may not be supported or function
112 correctly on your IBM server. Please consult the IBM ServerProven
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200113 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
114 for information on the specific driver level and support statement
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115 for your IBM server.
116
Jiri Slabycef2cf02007-05-08 00:31:45 -0700117config PHANTOM
Jiri Slabyec905a12008-07-25 01:48:23 -0700118 tristate "Sensable PHANToM (PCI)"
Jiri Slabycef2cf02007-05-08 00:31:45 -0700119 depends on PCI
120 help
121 Say Y here if you want to build a driver for Sensable PHANToM device.
122
Jiri Slabyec905a12008-07-25 01:48:23 -0700123 This driver is only for PCI PHANToMs.
124
Jiri Slabycef2cf02007-05-08 00:31:45 -0700125 If you choose to build module, its name will be phantom. If unsure,
126 say N here.
127
J Freyensee0b61d2a2011-05-06 16:56:49 -0700128config INTEL_MID_PTI
129 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
Jiri Slaby4bb16672013-05-22 10:56:24 +0200130 depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)
J Freyensee0b61d2a2011-05-06 16:56:49 -0700131 default n
132 help
133 The PTI (Parallel Trace Interface) driver directs
134 trace data routed from various parts in the system out
135 through an Intel Penwell PTI port and out of the mobile
136 device for analysis with a debugging tool (Lauterbach or Fido).
137
138 You should select this driver if the target kernel is meant for
139 an Intel Atom (non-netbook) mobile device containing a MIPI
140 P1149.7 standard implementation.
141
Brent Casavant59f14802006-10-17 00:09:25 -0700142config SGI_IOC4
143 tristate "SGI IOC4 Base IO support"
Al Viroaa6c2e62006-10-24 11:16:29 +0100144 depends on PCI
Brent Casavant59f14802006-10-17 00:09:25 -0700145 ---help---
146 This option enables basic support for the IOC4 chip on certain
147 SGI IO controller cards (IO9, IO10, and PCI-RT). This option
148 does not enable any specific functions on such a card, but provides
149 necessary infrastructure for other drivers to utilize.
150
151 If you have an SGI Altix with an IOC4-based card say Y.
152 Otherwise say N.
153
Alex Dubovf9565122006-10-04 02:15:38 -0700154config TIFM_CORE
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100155 tristate "TI Flash Media interface support"
156 depends on PCI
Alex Dubovf9565122006-10-04 02:15:38 -0700157 help
158 If you want support for Texas Instruments(R) Flash Media adapters
159 you should select this option and then also choose an appropriate
160 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
161 support', if you have a TI PCI74xx compatible card reader, for
162 example.
163 You will also have to select some flash card format drivers. MMC/SD
164 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
165 Interface support (MMC_TIFM_SD)'.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166
Len Brown8c367902008-11-30 23:59:07 -0500167 To compile this driver as a module, choose M here: the module will
Alex Dubovf9565122006-10-04 02:15:38 -0700168 be called tifm_core.
169
170config TIFM_7XX1
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100171 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
172 depends on PCI && TIFM_CORE
Alex Dubovf9565122006-10-04 02:15:38 -0700173 default TIFM_CORE
174 help
175 This option enables support for Texas Instruments(R) PCI74xx and
176 PCI76xx families of Flash Media adapters, found in many laptops.
177 To make actual use of the device, you will have to select some
178 flash card format drivers, as outlined in the TIFM_CORE Help.
179
Len Brown8c367902008-11-30 23:59:07 -0500180 To compile this driver as a module, choose M here: the module will
Alex Dubovf9565122006-10-04 02:15:38 -0700181 be called tifm_7xx1.
182
Darrick J. Wonga412ae32008-11-12 13:27:04 -0800183config ICS932S401
184 tristate "Integrated Circuits ICS932S401"
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100185 depends on I2C
Darrick J. Wonga412ae32008-11-12 13:27:04 -0800186 help
187 If you say yes here you get support for the Integrated Circuits
188 ICS932S401 clock control chips.
189
190 This driver can also be built as a module. If so, the module
191 will be called ics932s401.
192
Hans-Christian Egtvedteb1f2932007-10-16 23:26:11 -0700193config ATMEL_SSC
194 tristate "Device driver for Atmel SSC peripheral"
Jean Delvarefc1a5db2014-04-23 15:18:06 +0200195 depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST)
Hans-Christian Egtvedteb1f2932007-10-16 23:26:11 -0700196 ---help---
Matt LaPlante692105b2009-01-26 11:12:25 +0100197 This option enables device driver support for Atmel Synchronized
Hans-Christian Egtvedteb1f2932007-10-16 23:26:11 -0700198 Serial Communication peripheral (SSC).
199
200 The SSC peripheral supports a wide variety of serial frame based
201 communications, i.e. I2S, SPI, etc.
202
203 If unsure, say N.
204
James Bottomleyd569d5b2008-02-03 15:40:56 -0600205config ENCLOSURE_SERVICES
206 tristate "Enclosure Services"
207 default n
208 help
209 Provides support for intelligent enclosures (bays which
210 contain storage devices). You also need either a host
211 driver (SCSI/ATA) which supports enclosures
212 or a SCSI enclosure device (SES) to use these services.
213
Dean Nelson45d9ca42008-04-22 14:46:56 -0500214config SGI_XP
215 tristate "Support communication between SGI SSIs"
Dean Nelson3b0de7b2008-08-01 14:19:08 -0500216 depends on NET
Nick Piggin03b48632009-01-20 04:36:04 +0100217 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
Dean Nelson45d9ca42008-04-22 14:46:56 -0500218 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
219 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
Robin Holt1bc4faa2009-04-02 16:59:13 -0700220 select SGI_GRU if X86_64 && SMP
Dean Nelson45d9ca42008-04-22 14:46:56 -0500221 ---help---
222 An SGI machine can be divided into multiple Single System
223 Images which act independently of each other and have
224 hardware based memory protection from the others. Enabling
225 this feature will allow for direct communication between SSIs
226 based on a network adapter and DMA messaging.
227
Andres Salomon82dca612009-12-14 18:00:37 -0800228config CS5535_MFGPT
229 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
Jean Delvare0f78a112014-03-07 22:06:29 +0100230 depends on MFD_CS5535
Andres Salomon82dca612009-12-14 18:00:37 -0800231 default n
232 help
233 This driver provides access to MFGPT functionality for other
234 drivers that need timers. MFGPTs are available in the CS5535 and
235 CS5536 companion chips that are found in AMD Geode and several
236 other platforms. They have a better resolution and max interval
237 than the generic PIT, and are suitable for use as high-res timers.
238 You probably don't want to enable this manually; other drivers that
239 make use of it should enable it.
240
241config CS5535_MFGPT_DEFAULT_IRQ
242 int
Geert Uytterhoeven2bf212b2009-12-17 15:27:05 -0800243 depends on CS5535_MFGPT
Andres Salomon82dca612009-12-14 18:00:37 -0800244 default 7
245 help
246 MFGPTs on the CS5535 require an interrupt. The selected IRQ
247 can be overridden as a module option as well as by driver that
248 use the cs5535_mfgpt_ API; however, different architectures might
249 want to use a different IRQ by default. This is here for
250 architectures to set as necessary.
251
Randy Dunlap9c8f05c2010-03-05 13:42:35 -0800252config CS5535_CLOCK_EVENT_SRC
253 tristate "CS5535/CS5536 high-res timer (MFGPT) events"
John Stultz592913e2010-07-13 17:56:20 -0700254 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
Randy Dunlap9c8f05c2010-03-05 13:42:35 -0800255 help
256 This driver provides a clock event source based on the MFGPT
257 timer(s) in the CS5535 and CS5536 companion chips.
258 MFGPTs have a better resolution and max interval than the
259 generic PIT, and are suitable for use as high-res timers.
260
David Altobelli89bcb052008-07-02 09:38:53 -0600261config HP_ILO
dann frazier1ce873a2010-10-15 10:14:34 -0600262 tristate "Channel interface driver for the HP iLO processor"
Andrew Mortonf38954c2008-07-25 01:45:52 -0700263 depends on PCI
David Altobelli89bcb052008-07-02 09:38:53 -0600264 default n
265 help
266 The channel interface driver allows applications to communicate
dann frazier1ce873a2010-10-15 10:14:34 -0600267 with iLO management processors present on HP ProLiant servers.
268 Upon loading, the driver creates /dev/hpilo/dXccbN files, which
269 can be used to gather data from the management processor, via
270 read and write system calls.
David Altobelli89bcb052008-07-02 09:38:53 -0600271
272 To compile this driver as a module, choose M here: the
273 module will be called hpilo.
274
Tim Bird1f26d1c2015-07-16 16:55:32 -0700275config QCOM_COINCELL
276 tristate "Qualcomm coincell charger support"
277 depends on MFD_SPMI_PMIC || COMPILE_TEST
278 help
279 This driver supports the coincell block found inside of
280 Qualcomm PMICs. The coincell charger provides a means to
281 charge a coincell battery or backup capacitor which is used
282 to maintain PMIC register and RTC state in the absence of
283 external power.
284
Jack Steiner3d919e52008-07-29 22:34:01 -0700285config SGI_GRU
286 tristate "SGI GRU driver"
Robin Holt1bc4faa2009-04-02 16:59:13 -0700287 depends on X86_UV && SMP
Jack Steiner3d919e52008-07-29 22:34:01 -0700288 default n
289 select MMU_NOTIFIER
290 ---help---
291 The GRU is a hardware resource located in the system chipset. The GRU
292 contains memory that can be mmapped into the user address space. This memory is
293 used to communicate with the GRU to perform functions such as load/store,
294 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
295 instructions using user virtual addresses. GRU instructions (ex., bcopy) use
296 user virtual addresses for operands.
297
298 If you are not running on a SGI UV system, say N.
299
300config SGI_GRU_DEBUG
301 bool "SGI GRU driver debug"
302 depends on SGI_GRU
303 default n
304 ---help---
Geert Uytterhoevena82cb8b2014-04-14 18:55:49 +0200305 This option enables additional debugging code for the SGI GRU driver.
306 If you are unsure, say N.
Jack Steiner3d919e52008-07-29 22:34:01 -0700307
anantha22d96aa2010-10-26 14:22:41 -0700308config APDS9802ALS
309 tristate "Medfield Avago APDS9802 ALS Sensor module"
310 depends on I2C
311 help
312 If you say yes here you get support for the ALS APDS9802 ambient
313 light sensor.
314
315 This driver can also be built as a module. If so, the module
316 will be called apds9802als.
317
Daniel Mack3cdbbee2009-03-31 15:23:53 -0700318config ISL29003
319 tristate "Intersil ISL29003 ambient light sensor"
320 depends on I2C && SYSFS
321 help
322 If you say yes here you get support for the Intersil ISL29003
323 ambient light sensor.
324
325 This driver can also be built as a module. If so, the module
326 will be called isl29003.
327
Kalhan Trisal2e85c4d2010-10-26 14:22:40 -0700328config ISL29020
329 tristate "Intersil ISL29020 ambient light sensor"
330 depends on I2C
331 help
332 If you say yes here you get support for the Intersil ISL29020
333 ambient light sensor.
334
335 This driver can also be built as a module. If so, the module
336 will be called isl29020.
337
Jean Delvare6a9bcce2010-03-13 20:56:54 +0100338config SENSORS_TSL2550
339 tristate "Taos TSL2550 ambient light sensor"
340 depends on I2C && SYSFS
341 help
342 If you say yes here you get support for the Taos TSL2550
343 ambient light sensor.
344
345 This driver can also be built as a module. If so, the module
346 will be called tsl2550.
347
Hemanth V7efe15f2010-08-09 17:20:25 -0700348config SENSORS_BH1780
349 tristate "ROHM BH1780GLI ambient light sensor"
350 depends on I2C && SYSFS
351 help
352 If you say yes here you get support for the ROHM BH1780GLI
353 ambient light sensor.
354
355 This driver can also be built as a module. If so, the module
356 will be called bh1780gli.
357
Samu Onkalo190420a2010-10-26 14:22:37 -0700358config SENSORS_BH1770
359 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
360 depends on I2C
361 ---help---
362 Say Y here if you want to build a driver for BH1770GLC (ROHM) or
363 SFH7770 (Osram) combined ambient light and proximity sensor chip.
364
365 To compile this driver as a module, choose M here: the
366 module will be called bh1770glc. If unsure, say N here.
367
Samu Onkalo92b1f842010-10-26 14:22:38 -0700368config SENSORS_APDS990X
369 tristate "APDS990X combined als and proximity sensors"
370 depends on I2C
371 default n
372 ---help---
373 Say Y here if you want to build a driver for Avago APDS990x
374 combined ambient light and proximity sensor chip.
375
376 To compile this driver as a module, choose M here: the
377 module will be called apds990x. If unsure, say N here.
378
Kalhan Trisalcfa3b242010-08-09 17:21:05 -0700379config HMC6352
380 tristate "Honeywell HMC6352 compass"
381 depends on I2C
382 help
383 This driver provides support for the Honeywell HMC6352 compass,
384 providing configuration and heading data via sysfs.
385
Wolfram Sangdddc66f2009-12-06 17:06:16 +0100386config DS1682
387 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100388 depends on I2C
Wolfram Sangdddc66f2009-12-06 17:06:16 +0100389 help
390 If you say yes here you get support for Dallas Semiconductor
391 DS1682 Total Elapsed Time Recorder.
392
393 This driver can also be built as a module. If so, the module
394 will be called ds1682.
395
Pratyush Anandb9500542011-03-22 16:33:58 -0700396config SPEAR13XX_PCIE_GADGET
397 bool "PCIe gadget support for SPEAr13XX platform"
Arnd Bergmann98097852013-04-23 18:30:45 +0200398 depends on ARCH_SPEAR13XX && BROKEN
Pratyush Anandb9500542011-03-22 16:33:58 -0700399 default n
400 help
401 This option enables gadget support for PCIe controller. If
402 board file defines any controller as PCIe endpoint then a sysfs
403 entry will be created for that controller. User can use these
404 sysfs node to configure PCIe EP as per his requirements.
405
Daniel Mack4d009282009-12-14 18:00:17 -0800406config TI_DAC7512
407 tristate "Texas Instruments DAC7512"
408 depends on SPI && SYSFS
409 help
410 If you say yes here you get support for the Texas Instruments
411 DAC7512 16-bit digital-to-analog converter.
412
413 This driver can also be built as a module. If so, the module
Jonathan Neuschäfer149d7302010-11-09 23:20:26 +0100414 will be called ti_dac7512.
Daniel Mack4d009282009-12-14 18:00:17 -0800415
Dmitry Torokhov453dc652010-04-23 13:18:08 -0400416config VMWARE_BALLOON
417 tristate "VMware Balloon Driver"
Philip P. Moltmann48e3d662015-08-06 15:18:01 -0700418 depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
Dmitry Torokhov453dc652010-04-23 13:18:08 -0400419 help
420 This is VMware physical memory management driver which acts
421 like a "balloon" that can be inflated to reclaim physical pages
422 by reserving them in the guest and invalidating them in the
423 monitor, freeing up the underlying machine pages so they can
424 be allocated to other guests. The balloon can also be deflated
425 to allow the guest to use more physical memory.
426
427 If unsure, say N.
428
429 To compile this driver as a module, choose M here: the
Dmitry Torokhovd544b7a42010-09-22 13:04:57 -0700430 module will be called vmw_balloon.
Dmitry Torokhov453dc652010-04-23 13:18:08 -0400431
Linus Walleijce896242010-07-17 12:33:48 +0100432config ARM_CHARLCD
433 bool "ARM Ltd. Character LCD Driver"
434 depends on PLAT_VERSATILE
435 help
436 This is a driver for the character LCD found on the ARM Ltd.
437 Versatile and RealView Platform Baseboards. It doesn't do
438 very much more than display the text "ARM Linux" on the first
439 line and the Linux version on the second line, but that's
440 still useful.
441
Christoph Mair5bf1d292010-08-09 17:20:28 -0700442config BMP085
Ben Hutchings50e63152015-12-14 14:29:23 +0000443 tristate
Eric Andersson985087d2012-04-09 22:16:17 +0200444 depends on SYSFS
445
446config BMP085_I2C
447 tristate "BMP085 digital pressure sensor on I2C"
448 select BMP085
449 select REGMAP_I2C
Christoph Mair5bf1d292010-08-09 17:20:28 -0700450 depends on I2C && SYSFS
451 help
Eric Andersson985087d2012-04-09 22:16:17 +0200452 Say Y here if you want to support Bosch Sensortec's digital pressure
453 sensor hooked to an I2C bus.
Christoph Mair5bf1d292010-08-09 17:20:28 -0700454
455 To compile this driver as a module, choose M here: the
Eric Andersson985087d2012-04-09 22:16:17 +0200456 module will be called bmp085-i2c.
457
458config BMP085_SPI
459 tristate "BMP085 digital pressure sensor on SPI"
460 select BMP085
461 select REGMAP_SPI
462 depends on SPI_MASTER && SYSFS
463 help
464 Say Y here if you want to support Bosch Sensortec's digital pressure
465 sensor hooked to an SPI bus.
466
467 To compile this driver as a module, choose M here: the
468 module will be called bmp085-spi.
Christoph Mair5bf1d292010-08-09 17:20:28 -0700469
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900470config PCH_PHUB
Tomoya MORINAGA584ad002011-10-28 09:33:13 +0900471 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
Andy Shevchenko4cd57732013-06-04 19:46:26 +0300472 select GENERIC_NET_UTILS
Paul Burton46fd8c32015-11-30 16:21:35 +0000473 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900474 help
475 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
476 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
477 processor. The Topcliff has MAC address and Option ROM data in SROM.
478 This driver can access MAC address and Option ROM data in SROM.
479
Tomoya MORINAGA584ad002011-10-28 09:33:13 +0900480 This driver also can be used for LAPIS Semiconductor's IOH,
481 ML7213/ML7223/ML7831.
482 ML7213 which is for IVI(In-Vehicle Infotainment) use.
483 ML7223 IOH is for MP(Media Phone) use.
484 ML7831 IOH is for general purpose use.
485 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
486 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
Tomoya MORINAGAc47dda72010-12-22 21:04:11 +0900487
Masayuki Ohtakcf4ece52010-09-01 21:16:30 +0900488 To compile this driver as a module, choose M here: the module will
489 be called pch_phub.
490
Donggeun Kima1bb73d2011-07-25 17:13:07 -0700491config USB_SWITCH_FSA9480
492 tristate "FSA9480 USB Switch"
493 depends on I2C
494 help
495 The FSA9480 is a USB port accessory detector and switch.
496 The FSA9480 is fully controlled using I2C and enables USB data,
497 stereo and mono audio, video, microphone and UART data to use
498 a common connector port.
499
Stefan Roese781551d2012-12-07 09:06:59 +0100500config LATTICE_ECP3_CONFIG
501 tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
502 depends on SPI && SYSFS
503 select FW_LOADER
504 default n
505 help
506 This option enables support for bitstream configuration (programming
507 or loading) of the Lattice ECP3 FPGA family via SPI.
508
509 If unsure, say N.
510
Philipp Zabel4984c6f2013-04-29 16:17:12 -0700511config SRAM
512 bool "Generic on-chip SRAM driver"
513 depends on HAS_IOMEM
514 select GENERIC_ALLOCATOR
515 help
516 This driver allows you to declare a memory region to be managed by
517 the genalloc API. It is supposed to be used for small on-chip SRAM
518 areas found on many SoCs.
519
Pawel Moll974cc7b2014-04-23 10:49:31 +0100520config VEXPRESS_SYSCFG
521 bool "Versatile Express System Configuration driver"
522 depends on VEXPRESS_CONFIG
523 default y
524 help
525 ARM Ltd. Versatile Express uses specialised platform configuration
526 bus. System Configuration interface is one of the possible means
527 of generating transactions on this bus.
Ksenija Stanojevic305b37b2016-02-03 12:31:49 +0100528config PANEL
529 tristate "Parallel port LCD/Keypad Panel support"
530 depends on PARPORT
531 ---help---
532 Say Y here if you have an HD44780 or KS-0074 LCD connected to your
533 parallel port. This driver also features 4 and 6-key keypads. The LCD
534 is accessible through the /dev/lcd char device (10, 156), and the
535 keypad through /dev/keypad (10, 185). Both require misc device to be
536 enabled. This code can either be compiled as a module, or linked into
537 the kernel and started at boot. If you don't understand what all this
538 is about, say N.
539
540config PANEL_PARPORT
541 int "Default parallel port number (0=LPT1)"
542 depends on PANEL
543 range 0 255
544 default "0"
545 ---help---
546 This is the index of the parallel port the panel is connected to. One
547 driver instance only supports one parallel port, so if your keypad
548 and LCD are connected to two separate ports, you have to start two
549 modules with different arguments. Numbering starts with '0' for LPT1,
550 and so on.
551
552config PANEL_PROFILE
553 int "Default panel profile (0-5, 0=custom)"
554 depends on PANEL
555 range 0 5
556 default "5"
557 ---help---
558 To ease configuration, the driver supports different configuration
559 profiles for past and recent wirings. These profiles can also be
560 used to define an approximative configuration, completed by a few
561 other options. Here are the profiles :
562
563 0 = custom (see further)
564 1 = 2x16 parallel LCD, old keypad
565 2 = 2x16 serial LCD (KS-0074), new keypad
566 3 = 2x16 parallel LCD (Hantronix), no keypad
567 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
568 5 = 2x40 parallel LCD (old one), with old keypad
569
570 Custom configurations allow you to define how your display is
571 wired to the parallel port, and how it works. This is only intended
572 for experts.
573
574config PANEL_KEYPAD
575 depends on PANEL && PANEL_PROFILE="0"
576 int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
577 range 0 3
578 default 0
579 ---help---
580 This enables and configures a keypad connected to the parallel port.
581 The keys will be read from character device 10,185. Valid values are :
582
583 0 : do not enable this driver
584 1 : old 6 keys keypad
585 2 : new 6 keys keypad, as used on the server at www.ant-computing.com
586 3 : Nexcom NSA1045's 4 keys keypad
587
588 New profiles can be described in the driver source. The driver also
589 supports simultaneous keys pressed when the keypad supports them.
590
591config PANEL_LCD
592 depends on PANEL && PANEL_PROFILE="0"
593 int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
594 range 0 5
595 default 0
596 ---help---
597 This enables and configures an LCD connected to the parallel port.
598 The driver includes an interpreter for escape codes starting with
599 '\e[L' which are specific to the LCD, and a few ANSI codes. The
600 driver will be registered as character device 10,156, usually
601 under the name '/dev/lcd'. There are a total of 6 supported types :
602
603 0 : do not enable the driver
604 1 : custom configuration and wiring (see further)
605 2 : 2x16 & 2x40 parallel LCD (old wiring)
606 3 : 2x16 serial LCD (KS-0074 based)
607 4 : 2x16 parallel LCD (Hantronix wiring)
608 5 : 2x16 parallel LCD (Nexcom wiring)
609
610 When type '1' is specified, other options will appear to configure
611 more precise aspects (wiring, dimensions, protocol, ...). Please note
612 that those values changed from the 2.4 driver for better consistency.
613
614config PANEL_LCD_HEIGHT
615 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
616 int "Number of lines on the LCD (1-2)"
617 range 1 2
618 default 2
619 ---help---
620 This is the number of visible character lines on the LCD in custom profile.
621 It can either be 1 or 2.
622
623config PANEL_LCD_WIDTH
624 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
625 int "Number of characters per line on the LCD (1-40)"
626 range 1 40
627 default 40
628 ---help---
629 This is the number of characters per line on the LCD in custom profile.
630 Common values are 16,20,24,40.
631
632config PANEL_LCD_BWIDTH
633 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
634 int "Internal LCD line width (1-40, 40 by default)"
635 range 1 40
636 default 40
637 ---help---
638 Most LCDs use a standard controller which supports hardware lines of 40
639 characters, although sometimes only 16, 20 or 24 of them are really wired
640 to the terminal. This results in some non-visible but addressable characters,
641 and is the case for most parallel LCDs. Other LCDs, and some serial ones,
642 however, use the same line width internally as what is visible. The KS0074
643 for example, uses 16 characters per line for 16 visible characters per line.
644
645 This option lets you configure the value used by your LCD in 'custom' profile.
646 If you don't know, put '40' here.
647
648config PANEL_LCD_HWIDTH
649 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
650 int "Hardware LCD line width (1-64, 64 by default)"
651 range 1 64
652 default 64
653 ---help---
654 Most LCDs use a single address bit to differentiate line 0 and line 1. Since
655 some of them need to be able to address 40 chars with the lower bits, they
656 often use the immediately superior power of 2, which is 64, to address the
657 next line.
658
659 If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and
660 64 here for a 2x40.
661
662config PANEL_LCD_CHARSET
663 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
664 int "LCD character set (0=normal, 1=KS0074)"
665 range 0 1
666 default 0
667 ---help---
668 Some controllers such as the KS0074 use a somewhat strange character set
669 where many symbols are at unusual places. The driver knows how to map
670 'standard' ASCII characters to the character sets used by these controllers.
671 Valid values are :
672
673 0 : normal (untranslated) character set
674 1 : KS0074 character set
675
676 If you don't know, use the normal one (0).
677
678config PANEL_LCD_PROTO
679 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
680 int "LCD communication mode (0=parallel 8 bits, 1=serial)"
681 range 0 1
682 default 0
683 ---help---
684 This driver now supports any serial or parallel LCD wired to a parallel
685 port. But before assigning signals, the driver needs to know if it will
686 be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
687 (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
688 (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits
689 parallel LCD, and 1 for a serial LCD.
690
691config PANEL_LCD_PIN_E
692 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
693 int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
694 range -17 17
695 default 14
696 ---help---
697 This describes the number of the parallel port pin to which the LCD 'E'
698 signal has been connected. It can be :
699
700 0 : no connection (eg: connected to ground)
701 1..17 : directly connected to any of these pins on the DB25 plug
702 -1..-17 : connected to the same pin through an inverter (eg: transistor).
703
704 Default for the 'E' pin in custom profile is '14' (AUTOFEED).
705
706config PANEL_LCD_PIN_RS
707 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
708 int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
709 range -17 17
710 default 17
711 ---help---
712 This describes the number of the parallel port pin to which the LCD 'RS'
713 signal has been connected. It can be :
714
715 0 : no connection (eg: connected to ground)
716 1..17 : directly connected to any of these pins on the DB25 plug
717 -1..-17 : connected to the same pin through an inverter (eg: transistor).
718
719 Default for the 'RS' pin in custom profile is '17' (SELECT IN).
720
721config PANEL_LCD_PIN_RW
722 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
723 int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
724 range -17 17
725 default 16
726 ---help---
727 This describes the number of the parallel port pin to which the LCD 'RW'
728 signal has been connected. It can be :
729
730 0 : no connection (eg: connected to ground)
731 1..17 : directly connected to any of these pins on the DB25 plug
732 -1..-17 : connected to the same pin through an inverter (eg: transistor).
733
734 Default for the 'RW' pin in custom profile is '16' (INIT).
735
736config PANEL_LCD_PIN_SCL
737 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
738 int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
739 range -17 17
740 default 1
741 ---help---
742 This describes the number of the parallel port pin to which the serial
743 LCD 'SCL' signal has been connected. It can be :
744
745 0 : no connection (eg: connected to ground)
746 1..17 : directly connected to any of these pins on the DB25 plug
747 -1..-17 : connected to the same pin through an inverter (eg: transistor).
748
749 Default for the 'SCL' pin in custom profile is '1' (STROBE).
750
751config PANEL_LCD_PIN_SDA
752 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
753 int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
754 range -17 17
755 default 2
756 ---help---
757 This describes the number of the parallel port pin to which the serial
758 LCD 'SDA' signal has been connected. It can be :
759
760 0 : no connection (eg: connected to ground)
761 1..17 : directly connected to any of these pins on the DB25 plug
762 -1..-17 : connected to the same pin through an inverter (eg: transistor).
763
764 Default for the 'SDA' pin in custom profile is '2' (D0).
765
766config PANEL_LCD_PIN_BL
767 depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
768 int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
769 range -17 17
770 default 0
771 ---help---
772 This describes the number of the parallel port pin to which the LCD 'BL' signal
773 has been connected. It can be :
774
775 0 : no connection (eg: connected to ground)
776 1..17 : directly connected to any of these pins on the DB25 plug
777 -1..-17 : connected to the same pin through an inverter (eg: transistor).
778
779 Default for the 'BL' pin in custom profile is '0' (uncontrolled).
780
781config PANEL_CHANGE_MESSAGE
782 depends on PANEL
783 bool "Change LCD initialization message ?"
784 default "n"
785 ---help---
786 This allows you to replace the boot message indicating the kernel version
787 and the driver version with a custom message. This is useful on appliances
788 where a simple 'Starting system' message can be enough to stop a customer
789 from worrying.
790
791 If you say 'Y' here, you'll be able to choose a message yourself. Otherwise,
792 say 'N' and keep the default message with the version.
793
794config PANEL_BOOT_MESSAGE
795 depends on PANEL && PANEL_CHANGE_MESSAGE="y"
796 string "New initialization message"
797 default ""
798 ---help---
799 This allows you to replace the boot message indicating the kernel version
800 and the driver version with a custom message. This is useful on appliances
801 where a simple 'Starting system' message can be enough to stop a customer
802 from worrying.
803
804 An empty message will only clear the display at driver init time. Any other
805 printf()-formatted message is valid with newline and escape codes.
Pawel Moll974cc7b2014-04-23 10:49:31 +0100806
Rodolfo Giometti4e17e1d2008-11-12 13:27:12 -0800807source "drivers/misc/c2port/Kconfig"
Wolfram Sang5195e502009-01-26 21:19:53 +0100808source "drivers/misc/eeprom/Kconfig"
Michał Mirosław5f5bac82009-05-22 20:33:59 +0200809source "drivers/misc/cb710/Kconfig"
Pavan Savoy2bb32e82010-10-06 12:18:15 -0400810source "drivers/misc/ti-st/Kconfig"
Jean Delvareff606672011-03-21 17:59:36 +0100811source "drivers/misc/lis3lv02d/Kconfig"
Igor M. Liplianincff4fa82011-09-23 11:17:41 -0300812source "drivers/misc/altera-stapl/Kconfig"
Greg Kroah-Hartmanffc28252012-05-01 18:23:38 -0400813source "drivers/misc/mei/Kconfig"
George Zhang20259842013-01-08 15:55:59 -0800814source "drivers/misc/vmw_vmci/Kconfig"
Sudeep Duttb170d8c2013-09-05 16:41:31 -0700815source "drivers/misc/mic/Kconfig"
Frank Haverkamp76f5adb2013-12-09 13:30:44 +0100816source "drivers/misc/genwqe/Kconfig"
Greg Kroah-Hartman6e2055a2014-02-28 14:08:42 -0800817source "drivers/misc/echo/Kconfig"
Ian Munsie10542ca2014-10-08 19:55:01 +1100818source "drivers/misc/cxl/Kconfig"
Fabio Estevam7c5763b2012-01-24 02:11:25 -0200819endmenu