blob: b90f85bf5f811c098bfc01b9ed47ee8ee8c7bf00 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -07002# PCCARD (PCMCIA/CardBus) bus subsystem configuration
Linus Torvalds1da177e2005-04-16 15:20:36 -07003#
4
Jan Engelhardt42c53232007-10-16 01:23:48 -07005menuconfig PCCARD
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 tristate "PCCard (PCMCIA/CardBus) support"
Andrew Morton135c2942006-07-10 04:43:48 -07007 depends on HOTPLUG
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 ---help---
9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
10 computer. These are credit-card size devices such as network cards,
11 modems or hard drives often used with laptops computers. There are
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070012 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
13 CardBus cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -070014
15 To compile this driver as modules, choose M here: the
16 module will be called pcmcia_core.
17
18if PCCARD
19
Linus Torvalds1da177e2005-04-16 15:20:36 -070020config PCMCIA
21 tristate "16-bit PCMCIA support"
Dominik Brodowskif861bd22005-06-27 16:28:57 -070022 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 default y
24 ---help---
25 This option enables support for 16-bit PCMCIA cards. Most older
26 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
27 only using 32-bit CardBus cards, say Y or M here.
28
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070029 To use 16-bit PCMCIA cards, you will need supporting software in
30 most cases. (see the file <file:Documentation/Changes> for
31 location and details).
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33 To compile this driver as modules, choose M here: the
34 module will be called pcmcia.
35
36 If unsure, say Y.
37
Dominik Brodowskidaa95172005-06-27 16:28:14 -070038config PCMCIA_LOAD_CIS
Kees Cook204911f2012-10-02 11:18:44 -070039 bool "Load CIS updates from userspace"
40 depends on PCMCIA
Dominik Brodowskidaa95172005-06-27 16:28:14 -070041 select FW_LOADER
42 default y
43 help
44 Some PCMCIA cards require an updated Card Information Structure (CIS)
45 to be loaded from userspace to work correctly. If you say Y here,
46 and your userspace is arranged correctly, this will be loaded
47 automatically using the in-kernel firmware loader and the hotplug
48 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
49
50 If unsure, say Y.
51
Linus Torvalds1da177e2005-04-16 15:20:36 -070052config CARDBUS
Dominik Brodowski9fea84f2009-12-07 22:11:45 +010053 bool "32-bit CardBus support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070054 depends on PCI
55 default y
56 ---help---
57 CardBus is a bus mastering architecture for PC-cards, which allows
58 for 32 bit PC-cards (the original PCMCIA standard specifies only
59 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
60
61 To use 32 bit PC-cards, you also need a CardBus compatible host
62 bridge. Virtually all modern PCMCIA bridges do this, and most of
63 them are "yenta-compatible", so say Y or M there, too.
64
65 If unsure, say Y.
66
67comment "PC-card bridges"
68
69config YENTA
70 tristate "CardBus yenta-compatible bridge support"
Dominik Brodowski89b39f52005-07-07 17:59:09 -070071 depends on PCI
David Rientjes6a108a12011-01-20 14:44:16 -080072 select CARDBUS if !EXPERT
Michal Marek9d9c98e2010-01-07 21:03:11 +010073 select PCCARD_NONSTATIC if PCMCIA != n
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 ---help---
75 This option enables support for CardBus host bridges. Virtually
Dominik Brodowski9fea84f2009-12-07 22:11:45 +010076 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
77 the hardware inside your computer that PCMCIA cards are plugged
Linus Torvalds1da177e2005-04-16 15:20:36 -070078 into.
79
80 To compile this driver as modules, choose M here: the
81 module will be called yenta_socket.
82
83 If unsure, say Y.
84
Daniel Ritz63e7ebd2005-11-03 21:12:14 +010085config YENTA_O2
86 default y
David Rientjes6a108a12011-01-20 14:44:16 -080087 bool "Special initialization for O2Micro bridges" if EXPERT
Daniel Ritz63e7ebd2005-11-03 21:12:14 +010088 depends on YENTA
89
90config YENTA_RICOH
91 default y
David Rientjes6a108a12011-01-20 14:44:16 -080092 bool "Special initialization for Ricoh bridges" if EXPERT
Daniel Ritz63e7ebd2005-11-03 21:12:14 +010093 depends on YENTA
94
95config YENTA_TI
96 default y
David Rientjes6a108a12011-01-20 14:44:16 -080097 bool "Special initialization for TI and EnE bridges" if EXPERT
Daniel Ritz63e7ebd2005-11-03 21:12:14 +010098 depends on YENTA
99
100config YENTA_ENE_TUNE
101 default y
David Rientjes6a108a12011-01-20 14:44:16 -0800102 bool "Auto-tune EnE bridges for CB cards" if EXPERT
Daniel Ritz63e7ebd2005-11-03 21:12:14 +0100103 depends on YENTA_TI && CARDBUS
104
105config YENTA_TOSHIBA
106 default y
David Rientjes6a108a12011-01-20 14:44:16 -0800107 bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
Daniel Ritz63e7ebd2005-11-03 21:12:14 +0100108 depends on YENTA
109
Linus Torvalds1da177e2005-04-16 15:20:36 -0700110config PD6729
111 tristate "Cirrus PD6729 compatible bridge support"
112 depends on PCMCIA && PCI
113 select PCCARD_NONSTATIC
114 help
115 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
116 device, found in some older laptops and PCMCIA card readers.
117
118config I82092
119 tristate "i82092 compatible bridge support"
120 depends on PCMCIA && PCI
121 select PCCARD_NONSTATIC
122 help
123 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
124 found in some older laptops and more commonly in evaluation boards for the
125 chip.
126
127config I82365
128 tristate "i82365 compatible bridge support"
129 depends on PCMCIA && ISA
130 select PCCARD_NONSTATIC
131 help
132 Say Y here to include support for ISA-bus PCMCIA host bridges that
133 are register compatible with the Intel i82365. These are found on
134 older laptops and ISA-bus card readers for desktop systems. A
135 "bridge" is the hardware inside your computer that PCMCIA cards are
136 plugged into. If unsure, say N.
137
138config TCIC
139 tristate "Databook TCIC host bridge support"
Komuro81000802005-09-24 23:12:40 -0700140 depends on PCMCIA && ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141 select PCCARD_NONSTATIC
142 help
143 Say Y here to include support for the Databook TCIC family of PCMCIA
144 host bridges. These are only found on a handful of old systems.
145 "Bridge" is the name used for the hardware inside your computer that
146 PCMCIA cards are plugged into. If unsure, say N.
147
Marcelo Tosattide957c82005-10-28 17:46:13 -0700148config PCMCIA_M8XX
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700149 tristate "MPC8xx PCMCIA support"
Michal Marek9d9c98e2010-01-07 21:03:11 +0100150 depends on PCCARD && PPC && 8xx
151 select PCCARD_IODYN if PCMCIA != n
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700152 help
153 Say Y here to include support for PowerPC 8xx series PCMCIA
154 controller.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700155
Vitaly Bordug80128ff2007-07-09 11:37:35 -0700156 This driver is also available as a module called m8xx_pcmcia.
Marcelo Tosattide957c82005-10-28 17:46:13 -0700157
Manuel Lauss66213b32009-10-04 14:55:27 +0200158config PCMCIA_ALCHEMY_DEVBOARD
159 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
Manuel Lauss42a4f172010-07-15 21:45:04 +0200160 depends on MIPS_ALCHEMY && PCMCIA
Manuel Lauss66213b32009-10-04 14:55:27 +0200161 select 64BIT_PHYS_ADDR
162 help
163 Enable this driver of you want PCMCIA support on your Alchemy
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000164 Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
165 board. NOT suitable for the PB1000!
Manuel Lauss66213b32009-10-04 14:55:27 +0200166
167 This driver is also available as a module called db1xxx_ss.ko
168
Manuel Lauss0273b4e2009-10-04 14:55:29 +0200169config PCMCIA_XXS1500
170 tristate "MyCable XXS1500 PCMCIA socket support"
171 depends on PCMCIA && MIPS_XXS1500
172 select 64BIT_PHYS_ADDR
173 help
174 Support for the PCMCIA/CF socket interface on MyCable XXS1500
175 systems.
176
177 This driver is also available as a module called xxs1500_ss.ko
178
Maxime Bizon553d6d52009-09-28 14:49:43 +0200179config PCMCIA_BCM63XX
180 tristate "bcm63xx pcmcia support"
181 depends on BCM63XX && PCMCIA
182
Russell King - ARM Linux0f767de2009-03-26 21:14:19 +0000183config PCMCIA_SOC_COMMON
Russell King1bf8e622009-12-06 16:58:50 +0000184 tristate
Russell King - ARM Linux0f767de2009-03-26 21:14:19 +0000185
Russell King136b7582012-01-17 22:36:45 +0000186config PCMCIA_SA11XX_BASE
187 tristate
188
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189config PCMCIA_SA1100
190 tristate "SA1100 support"
191 depends on ARM && ARCH_SA1100 && PCMCIA
Russell King - ARM Linux0f767de2009-03-26 21:14:19 +0000192 select PCMCIA_SOC_COMMON
Russell King136b7582012-01-17 22:36:45 +0000193 select PCMCIA_SA11XX_BASE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194 help
195 Say Y here to include support for SA11x0-based PCMCIA or CF
196 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
197 Xscale(R) embedded machines.
198
199 This driver is also available as a module called sa1100_cs.
200
201config PCMCIA_SA1111
202 tristate "SA1111 support"
Russell King11990b22012-01-17 22:43:20 +0000203 depends on ARM && SA1111 && PCMCIA
Russell King - ARM Linux0f767de2009-03-26 21:14:19 +0000204 select PCMCIA_SOC_COMMON
Russell King11990b22012-01-17 22:43:20 +0000205 select PCMCIA_SA11XX_BASE if ARCH_SA1100
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206 help
207 Say Y here to include support for SA1111-based PCMCIA or CF
208 sockets, found on the Jornada 720, Graphicsmaster and other
209 StrongARM(R)/Xscale(R) embedded machines.
210
211 This driver is also available as a module called sa1111_cs.
212
213config PCMCIA_PXA2XX
214 tristate "PXA2xx support"
215 depends on ARM && ARCH_PXA && PCMCIA
Marek VaĊĦut35978402008-07-07 17:28:59 +0100216 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
Russell Kingcc513ac2008-10-07 19:08:32 +0100217 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
Marek Vasutaddff0f2010-03-10 04:16:28 +0100218 || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
Marek Vasutfd629992010-08-11 05:04:53 +0200219 || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
Paul Parsons95244302012-05-06 01:09:19 +0100220 || MACH_COLIBRI320 || MACH_H4700)
Russell King11990b22012-01-17 22:43:20 +0000221 select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
Russell King - ARM Linux0f767de2009-03-26 21:14:19 +0000222 select PCMCIA_SOC_COMMON
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223 help
224 Say Y here to include support for the PXA2xx PCMCIA controller
225
Dominik Brodowskic9f50dd2009-10-23 12:56:46 +0200226config PCMCIA_DEBUG
227 bool "Enable debugging"
228 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
229 help
230 Say Y here to enable debugging for the SoC PCMCIA layer.
231 You will need to choose the debugging level either via the
232 kernel command line, or module options depending whether
233 you build the drivers as modules.
234
235 The kernel command line options are:
236 sa11xx_core.pc_debug=N
237 pxa2xx_core.pc_debug=N
238
239 The module option is called pc_debug=N
240
241 In all the above examples, N is the debugging verbosity
242 level.
243
Linus Torvalds1da177e2005-04-16 15:20:36 -0700244config PCMCIA_PROBE
245 bool
Dominik Brodowski6423efa2005-12-11 20:47:44 +0100246 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247
248config M32R_PCC
249 bool "M32R PCMCIA I/F"
250 depends on M32R && CHIP_M32700 && PCMCIA
251 help
252 Say Y here to use the M32R PCMCIA controller.
253
254config M32R_CFC
255 bool "M32R CF I/F Controller"
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700256 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257 help
258 Say Y here to use the M32R CompactFlash controller.
259
260config M32R_CFC_NUM
261 int "M32R CF I/F number"
262 depends on M32R_CFC
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700263 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 help
265 Set the number of M32R CF slots.
266
267config PCMCIA_VRC4171
268 tristate "NEC VRC4171 Card Controllers support"
Yoichi Yuasadaaeb722006-04-06 15:08:29 +0900269 depends on CPU_VR41XX && ISA && PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270
271config PCMCIA_VRC4173
272 tristate "NEC VRC4173 CARDU support"
273 depends on CPU_VR41XX && PCI && PCMCIA
274
David Brownellf74e48a2005-09-09 13:03:28 -0700275config OMAP_CF
276 tristate "OMAP CompactFlash Controller"
277 depends on PCMCIA && ARCH_OMAP16XX
278 help
279 Say Y here to support the CompactFlash controller on OMAP.
280 Note that this doesn't support "True IDE" mode.
281
Michael Hennerich785e8212008-06-11 09:06:16 +0200282config BFIN_CFPCMCIA
283 tristate "Blackfin CompactFlash PCMCIA Driver"
284 depends on PCMCIA && BLACKFIN
285 help
286 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
287
288
Andrew Victor2c1f3b72006-02-21 12:56:52 +0200289config AT91_CF
290 tristate "AT91 CompactFlash Controller"
291 depends on PCMCIA && ARCH_AT91RM9200
292 help
293 Say Y here to support the CompactFlash controller on AT91 chips.
294 Or choose M to compile the driver as a module named "at91_cf".
295
Olof Johansson2b571a02007-10-16 23:26:20 -0700296config ELECTRA_CF
297 tristate "Electra CompactFlash Controller"
298 depends on PCMCIA && PPC_PASEMI
299 help
300 Say Y here to support the CompactFlash controller on the
301 PA Semi Electra eval board.
302
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303config PCCARD_NONSTATIC
Dominik Brodowski49b11532010-03-07 16:41:57 +0100304 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305
Dominik Brodowski3b27e942005-12-07 12:32:20 +0100306config PCCARD_IODYN
307 bool
308
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309endif # PCCARD