blob: 2ef7103270bb7eb250ae15e16650c17a46a643d7 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2**
3** PCI Lower Bus Adapter (LBA) manager
4**
5** (c) Copyright 1999,2000 Grant Grundler
6** (c) Copyright 1999,2000 Hewlett-Packard Company
7**
8** This program is free software; you can redistribute it and/or modify
9** it under the terms of the GNU General Public License as published by
10** the Free Software Foundation; either version 2 of the License, or
11** (at your option) any later version.
12**
13**
14** This module primarily provides access to PCI bus (config/IOport
15** spaces) on platforms with an SBA/LBA chipset. A/B/C/J/L/N-class
16** with 4 digit model numbers - eg C3000 (and A400...sigh).
17**
18** LBA driver isn't as simple as the Dino driver because:
19** (a) this chip has substantial bug fixes between revisions
20** (Only one Dino bug has a software workaround :^( )
21** (b) has more options which we don't (yet) support (DMA hints, OLARD)
22** (c) IRQ support lives in the I/O SAPIC driver (not with PCI driver)
23** (d) play nicely with both PAT and "Legacy" PA-RISC firmware (PDC).
24** (dino only deals with "Legacy" PDC)
25**
26** LBA driver passes the I/O SAPIC HPA to the I/O SAPIC driver.
27** (I/O SAPIC is integratd in the LBA chip).
28**
29** FIXME: Add support to SBA and LBA drivers for DMA hint sets
30** FIXME: Add support for PCI card hot-plug (OLARD).
31*/
32
33#include <linux/delay.h>
34#include <linux/types.h>
35#include <linux/kernel.h>
36#include <linux/spinlock.h>
Greg Kroah-Hartman0fe763c2012-12-21 15:14:44 -080037#include <linux/init.h> /* for __init */
Linus Torvalds1da177e2005-04-16 15:20:36 -070038#include <linux/pci.h>
39#include <linux/ioport.h>
40#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070041
42#include <asm/byteorder.h>
43#include <asm/pdc.h>
44#include <asm/pdcpat.h>
45#include <asm/page.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046
Kyle McMartin1790cf92006-08-24 21:32:49 -040047#include <asm/ropes.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070048#include <asm/hardware.h> /* for register_parisc_driver() stuff */
49#include <asm/parisc-device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070050#include <asm/io.h> /* read/write stuff */
51
52#undef DEBUG_LBA /* general stuff */
53#undef DEBUG_LBA_PORT /* debug I/O Port access */
54#undef DEBUG_LBA_CFG /* debug Config Space Access (ie PCI Bus walk) */
55#undef DEBUG_LBA_PAT /* debug PCI Resource Mgt code - PDC PAT only */
56
57#undef FBB_SUPPORT /* Fast Back-Back xfers - NOT READY YET */
58
59
60#ifdef DEBUG_LBA
61#define DBG(x...) printk(x)
62#else
63#define DBG(x...)
64#endif
65
66#ifdef DEBUG_LBA_PORT
67#define DBG_PORT(x...) printk(x)
68#else
69#define DBG_PORT(x...)
70#endif
71
72#ifdef DEBUG_LBA_CFG
73#define DBG_CFG(x...) printk(x)
74#else
75#define DBG_CFG(x...)
76#endif
77
78#ifdef DEBUG_LBA_PAT
79#define DBG_PAT(x...) printk(x)
80#else
81#define DBG_PAT(x...)
82#endif
83
84
85/*
86** Config accessor functions only pass in the 8-bit bus number and not
87** the 8-bit "PCI Segment" number. Each LBA will be assigned a PCI bus
88** number based on what firmware wrote into the scratch register.
89**
90** The "secondary" bus number is set to this before calling
91** pci_register_ops(). If any PPB's are present, the scan will
92** discover them and update the "secondary" and "subordinate"
93** fields in the pci_bus structure.
94**
95** Changes in the configuration *may* result in a different
96** bus number for each LBA depending on what firmware does.
97*/
98
99#define MODULE_NAME "LBA"
100
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101/* non-postable I/O port space, densely packed */
102#define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL)
Helge Deller8039de12006-01-10 20:35:03 -0500103static void __iomem *astro_iop_base __read_mostly;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105static u32 lba_t32;
106
107/* lba flags */
108#define LBA_FLAG_SKIP_PROBE 0x10
109
110#define LBA_SKIP_PROBE(d) ((d)->flags & LBA_FLAG_SKIP_PROBE)
111
112
113/* Looks nice and keeps the compiler happy */
114#define LBA_DEV(d) ((struct lba_device *) (d))
115
116
117/*
118** Only allow 8 subsidiary busses per LBA
119** Problem is the PCI bus numbering is globally shared.
120*/
121#define LBA_MAX_NUM_BUSES 8
122
123/************************************
124 * LBA register read and write support
125 *
126 * BE WARNED: register writes are posted.
127 * (ie follow writes which must reach HW with a read)
128 */
129#define READ_U8(addr) __raw_readb(addr)
130#define READ_U16(addr) __raw_readw(addr)
131#define READ_U32(addr) __raw_readl(addr)
132#define WRITE_U8(value, addr) __raw_writeb(value, addr)
133#define WRITE_U16(value, addr) __raw_writew(value, addr)
134#define WRITE_U32(value, addr) __raw_writel(value, addr)
135
136#define READ_REG8(addr) readb(addr)
137#define READ_REG16(addr) readw(addr)
138#define READ_REG32(addr) readl(addr)
139#define READ_REG64(addr) readq(addr)
140#define WRITE_REG8(value, addr) writeb(value, addr)
141#define WRITE_REG16(value, addr) writew(value, addr)
142#define WRITE_REG32(value, addr) writel(value, addr)
143
144
145#define LBA_CFG_TOK(bus,dfn) ((u32) ((bus)<<16 | (dfn)<<8))
146#define LBA_CFG_BUS(tok) ((u8) ((tok)>>16))
147#define LBA_CFG_DEV(tok) ((u8) ((tok)>>11) & 0x1f)
148#define LBA_CFG_FUNC(tok) ((u8) ((tok)>>8 ) & 0x7)
149
150
151/*
152** Extract LBA (Rope) number from HPA
153** REVISIT: 16 ropes for Stretch/Ike?
154*/
155#define ROPES_PER_IOC 8
156#define LBA_NUM(x) ((((unsigned long) x) >> 13) & (ROPES_PER_IOC-1))
157
158
159static void
160lba_dump_res(struct resource *r, int d)
161{
162 int i;
163
164 if (NULL == r)
165 return;
166
167 printk(KERN_DEBUG "(%p)", r->parent);
168 for (i = d; i ; --i) printk(" ");
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700169 printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r,
170 (long)r->start, (long)r->end, r->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171 lba_dump_res(r->child, d+2);
172 lba_dump_res(r->sibling, d);
173}
174
175
176/*
177** LBA rev 2.0, 2.1, 2.2, and 3.0 bus walks require a complex
178** workaround for cfg cycles:
179** -- preserve LBA state
180** -- prevent any DMA from occurring
181** -- turn on smart mode
182** -- probe with config writes before doing config reads
183** -- check ERROR_STATUS
184** -- clear ERROR_STATUS
185** -- restore LBA state
186**
187** The workaround is only used for device discovery.
188*/
189
190static int lba_device_present(u8 bus, u8 dfn, struct lba_device *d)
191{
Yinghai Lub918c622012-05-17 18:51:11 -0700192 u8 first_bus = d->hba.hba_bus->busn_res.start;
193 u8 last_sub_bus = d->hba.hba_bus->busn_res.end;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194
195 if ((bus < first_bus) ||
196 (bus > last_sub_bus) ||
197 ((bus - first_bus) >= LBA_MAX_NUM_BUSES)) {
198 return 0;
199 }
200
201 return 1;
202}
203
204
205
206#define LBA_CFG_SETUP(d, tok) { \
207 /* Save contents of error config register. */ \
208 error_config = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); \
209\
210 /* Save contents of status control register. */ \
211 status_control = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); \
212\
213 /* For LBA rev 2.0, 2.1, 2.2, and 3.0, we must disable DMA \
214 ** arbitration for full bus walks. \
215 */ \
216 /* Save contents of arb mask register. */ \
217 arb_mask = READ_REG32(d->hba.base_addr + LBA_ARB_MASK); \
218\
219 /* \
220 * Turn off all device arbitration bits (i.e. everything \
221 * except arbitration enable bit). \
222 */ \
223 WRITE_REG32(0x1, d->hba.base_addr + LBA_ARB_MASK); \
224\
225 /* \
226 * Set the smart mode bit so that master aborts don't cause \
227 * LBA to go into PCI fatal mode (required). \
228 */ \
229 WRITE_REG32(error_config | LBA_SMART_MODE, d->hba.base_addr + LBA_ERROR_CONFIG); \
230}
231
232
233#define LBA_CFG_PROBE(d, tok) { \
234 /* \
235 * Setup Vendor ID write and read back the address register \
236 * to make sure that LBA is the bus master. \
237 */ \
238 WRITE_REG32(tok | PCI_VENDOR_ID, (d)->hba.base_addr + LBA_PCI_CFG_ADDR);\
239 /* \
240 * Read address register to ensure that LBA is the bus master, \
241 * which implies that DMA traffic has stopped when DMA arb is off. \
242 */ \
243 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
244 /* \
245 * Generate a cfg write cycle (will have no affect on \
246 * Vendor ID register since read-only). \
247 */ \
248 WRITE_REG32(~0, (d)->hba.base_addr + LBA_PCI_CFG_DATA); \
249 /* \
250 * Make sure write has completed before proceeding further, \
251 * i.e. before setting clear enable. \
252 */ \
253 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
254}
255
256
257/*
258 * HPREVISIT:
259 * -- Can't tell if config cycle got the error.
260 *
261 * OV bit is broken until rev 4.0, so can't use OV bit and
262 * LBA_ERROR_LOG_ADDR to tell if error belongs to config cycle.
263 *
264 * As of rev 4.0, no longer need the error check.
265 *
266 * -- Even if we could tell, we still want to return -1
267 * for **ANY** error (not just master abort).
268 *
269 * -- Only clear non-fatal errors (we don't want to bring
270 * LBA out of pci-fatal mode).
271 *
272 * Actually, there is still a race in which
273 * we could be clearing a fatal error. We will
274 * live with this during our initial bus walk
275 * until rev 4.0 (no driver activity during
276 * initial bus walk). The initial bus walk
277 * has race conditions concerning the use of
278 * smart mode as well.
279 */
280
281#define LBA_MASTER_ABORT_ERROR 0xc
282#define LBA_FATAL_ERROR 0x10
283
284#define LBA_CFG_MASTER_ABORT_CHECK(d, base, tok, error) { \
285 u32 error_status = 0; \
286 /* \
287 * Set clear enable (CE) bit. Unset by HW when new \
288 * errors are logged -- LBA HW ERS section 14.3.3). \
289 */ \
290 WRITE_REG32(status_control | CLEAR_ERRLOG_ENABLE, base + LBA_STAT_CTL); \
291 error_status = READ_REG32(base + LBA_ERROR_STATUS); \
292 if ((error_status & 0x1f) != 0) { \
293 /* \
294 * Fail the config read request. \
295 */ \
296 error = 1; \
297 if ((error_status & LBA_FATAL_ERROR) == 0) { \
298 /* \
299 * Clear error status (if fatal bit not set) by setting \
300 * clear error log bit (CL). \
301 */ \
302 WRITE_REG32(status_control | CLEAR_ERRLOG, base + LBA_STAT_CTL); \
303 } \
304 } \
305}
306
307#define LBA_CFG_TR4_ADDR_SETUP(d, addr) \
308 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR);
309
310#define LBA_CFG_ADDR_SETUP(d, addr) { \
311 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
312 /* \
313 * Read address register to ensure that LBA is the bus master, \
314 * which implies that DMA traffic has stopped when DMA arb is off. \
315 */ \
316 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
317}
318
319
320#define LBA_CFG_RESTORE(d, base) { \
321 /* \
322 * Restore status control register (turn off clear enable). \
323 */ \
324 WRITE_REG32(status_control, base + LBA_STAT_CTL); \
325 /* \
326 * Restore error config register (turn off smart mode). \
327 */ \
328 WRITE_REG32(error_config, base + LBA_ERROR_CONFIG); \
329 /* \
330 * Restore arb mask register (reenables DMA arbitration). \
331 */ \
332 WRITE_REG32(arb_mask, base + LBA_ARB_MASK); \
333}
334
335
336
337static unsigned int
338lba_rd_cfg(struct lba_device *d, u32 tok, u8 reg, u32 size)
339{
340 u32 data = ~0U;
341 int error = 0;
342 u32 arb_mask = 0; /* used by LBA_CFG_SETUP/RESTORE */
343 u32 error_config = 0; /* used by LBA_CFG_SETUP/RESTORE */
344 u32 status_control = 0; /* used by LBA_CFG_SETUP/RESTORE */
345
346 LBA_CFG_SETUP(d, tok);
347 LBA_CFG_PROBE(d, tok);
348 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error);
349 if (!error) {
350 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
351
352 LBA_CFG_ADDR_SETUP(d, tok | reg);
353 switch (size) {
354 case 1: data = (u32) READ_REG8(data_reg + (reg & 3)); break;
355 case 2: data = (u32) READ_REG16(data_reg+ (reg & 2)); break;
356 case 4: data = READ_REG32(data_reg); break;
357 }
358 }
359 LBA_CFG_RESTORE(d, d->hba.base_addr);
360 return(data);
361}
362
363
364static int elroy_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
365{
366 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
Yinghai Lub918c622012-05-17 18:51:11 -0700367 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 u32 tok = LBA_CFG_TOK(local_bus, devfn);
369 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
370
371 if ((pos > 255) || (devfn > 255))
372 return -EINVAL;
373
374/* FIXME: B2K/C3600 workaround is always use old method... */
375 /* if (!LBA_SKIP_PROBE(d)) */ {
376 /* original - Generate config cycle on broken elroy
377 with risk we will miss PCI bus errors. */
378 *data = lba_rd_cfg(d, tok, pos, size);
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700379 DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __func__, tok, pos, *data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700380 return 0;
381 }
382
Yinghai Lub918c622012-05-17 18:51:11 -0700383 if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->busn_res.start, devfn, d)) {
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700384 DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385 /* either don't want to look or know device isn't present. */
386 *data = ~0U;
387 return(0);
388 }
389
390 /* Basic Algorithm
391 ** Should only get here on fully working LBA rev.
392 ** This is how simple the code should have been.
393 */
394 LBA_CFG_ADDR_SETUP(d, tok | pos);
395 switch(size) {
396 case 1: *data = READ_REG8 (data_reg + (pos & 3)); break;
397 case 2: *data = READ_REG16(data_reg + (pos & 2)); break;
398 case 4: *data = READ_REG32(data_reg); break;
399 }
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700400 DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __func__, tok, pos, *data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700401 return 0;
402}
403
404
405static void
406lba_wr_cfg(struct lba_device *d, u32 tok, u8 reg, u32 data, u32 size)
407{
408 int error = 0;
409 u32 arb_mask = 0;
410 u32 error_config = 0;
411 u32 status_control = 0;
412 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
413
414 LBA_CFG_SETUP(d, tok);
415 LBA_CFG_ADDR_SETUP(d, tok | reg);
416 switch (size) {
417 case 1: WRITE_REG8 (data, data_reg + (reg & 3)); break;
418 case 2: WRITE_REG16(data, data_reg + (reg & 2)); break;
419 case 4: WRITE_REG32(data, data_reg); break;
420 }
421 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error);
422 LBA_CFG_RESTORE(d, d->hba.base_addr);
423}
424
425
426/*
427 * LBA 4.0 config write code implements non-postable semantics
428 * by doing a read of CONFIG ADDR after the write.
429 */
430
431static int elroy_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
432{
433 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
Yinghai Lub918c622012-05-17 18:51:11 -0700434 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 u32 tok = LBA_CFG_TOK(local_bus,devfn);
436
437 if ((pos > 255) || (devfn > 255))
438 return -EINVAL;
439
440 if (!LBA_SKIP_PROBE(d)) {
441 /* Original Workaround */
442 lba_wr_cfg(d, tok, pos, (u32) data, size);
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700443 DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __func__, tok, pos,data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444 return 0;
445 }
446
Yinghai Lub918c622012-05-17 18:51:11 -0700447 if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->busn_res.start, devfn, d))) {
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700448 DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449 return 1; /* New Workaround */
450 }
451
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700452 DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __func__, tok, pos, data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700453
454 /* Basic Algorithm */
455 LBA_CFG_ADDR_SETUP(d, tok | pos);
456 switch(size) {
457 case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3));
458 break;
459 case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2));
460 break;
461 case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA);
462 break;
463 }
464 /* flush posted write */
465 lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR);
466 return 0;
467}
468
469
470static struct pci_ops elroy_cfg_ops = {
471 .read = elroy_cfg_read,
472 .write = elroy_cfg_write,
473};
474
475/*
476 * The mercury_cfg_ops are slightly misnamed; they're also used for Elroy
477 * TR4.0 as no additional bugs were found in this areea between Elroy and
478 * Mercury
479 */
480
481static int mercury_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
482{
483 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
Yinghai Lub918c622012-05-17 18:51:11 -0700484 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485 u32 tok = LBA_CFG_TOK(local_bus, devfn);
486 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
487
488 if ((pos > 255) || (devfn > 255))
489 return -EINVAL;
490
491 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
492 switch(size) {
493 case 1:
494 *data = READ_REG8(data_reg + (pos & 3));
495 break;
496 case 2:
497 *data = READ_REG16(data_reg + (pos & 2));
498 break;
499 case 4:
500 *data = READ_REG32(data_reg); break;
501 break;
502 }
503
504 DBG_CFG("mercury_cfg_read(%x+%2x) -> 0x%x\n", tok, pos, *data);
505 return 0;
506}
507
508/*
509 * LBA 4.0 config write code implements non-postable semantics
510 * by doing a read of CONFIG ADDR after the write.
511 */
512
513static int mercury_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
514{
515 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
516 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
Yinghai Lub918c622012-05-17 18:51:11 -0700517 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 u32 tok = LBA_CFG_TOK(local_bus,devfn);
519
520 if ((pos > 255) || (devfn > 255))
521 return -EINVAL;
522
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700523 DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __func__, tok, pos, data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524
525 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
526 switch(size) {
527 case 1:
528 WRITE_REG8 (data, data_reg + (pos & 3));
529 break;
530 case 2:
531 WRITE_REG16(data, data_reg + (pos & 2));
532 break;
533 case 4:
534 WRITE_REG32(data, data_reg);
535 break;
536 }
537
538 /* flush posted write */
539 lba_t32 = READ_U32(d->hba.base_addr + LBA_PCI_CFG_ADDR);
540 return 0;
541}
542
543static struct pci_ops mercury_cfg_ops = {
544 .read = mercury_cfg_read,
545 .write = mercury_cfg_write,
546};
547
548
549static void
550lba_bios_init(void)
551{
552 DBG(MODULE_NAME ": lba_bios_init\n");
553}
554
555
556#ifdef CONFIG_64BIT
557
558/*
Grant Grundler6ca45a22006-01-10 20:47:56 -0500559 * truncate_pat_collision: Deal with overlaps or outright collisions
560 * between PAT PDC reported ranges.
561 *
562 * Broken PA8800 firmware will report lmmio range that
563 * overlaps with CPU HPA. Just truncate the lmmio range.
564 *
565 * BEWARE: conflicts with this lmmio range may be an
566 * elmmio range which is pointing down another rope.
567 *
568 * FIXME: only deals with one collision per range...theoretically we
569 * could have several. Supporting more than one collision will get messy.
570 */
571static unsigned long
572truncate_pat_collision(struct resource *root, struct resource *new)
573{
574 unsigned long start = new->start;
575 unsigned long end = new->end;
576 struct resource *tmp = root->child;
577
578 if (end <= start || start < root->start || !tmp)
579 return 0;
580
581 /* find first overlap */
582 while (tmp && tmp->end < start)
583 tmp = tmp->sibling;
584
585 /* no entries overlap */
586 if (!tmp) return 0;
587
588 /* found one that starts behind the new one
589 ** Don't need to do anything.
590 */
591 if (tmp->start >= end) return 0;
592
593 if (tmp->start <= start) {
594 /* "front" of new one overlaps */
595 new->start = tmp->end + 1;
596
597 if (tmp->end >= end) {
598 /* AACCKK! totally overlaps! drop this range. */
599 return 1;
600 }
601 }
602
603 if (tmp->end < end ) {
604 /* "end" of new one overlaps */
605 new->end = tmp->start - 1;
606 }
607
608 printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] "
609 "to [%lx,%lx]\n",
610 start, end,
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700611 (long)new->start, (long)new->end );
Grant Grundler6ca45a22006-01-10 20:47:56 -0500612
613 return 0; /* truncation successful */
614}
615
616#else
Grant Grundler6ca45a22006-01-10 20:47:56 -0500617#define truncate_pat_collision(r,n) (0)
618#endif
619
620/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700621** The algorithm is generic code.
622** But it needs to access local data structures to get the IRQ base.
623** Could make this a "pci_fixup_irq(bus, region)" but not sure
624** it's worth it.
625**
626** Called by do_pci_scan_bus() immediately after each PCI bus is walked.
627** Resources aren't allocated until recursive buswalk below HBA is completed.
628*/
629static void
630lba_fixup_bus(struct pci_bus *bus)
631{
Bjorn Helgaasf5725f42012-08-16 16:57:22 -0600632 struct pci_dev *dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633#ifdef FBB_SUPPORT
634 u16 status;
635#endif
636 struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637
638 DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n",
Yinghai Lub918c622012-05-17 18:51:11 -0700639 bus, (int)bus->busn_res.start, bus->bridge->platform_data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700640
641 /*
642 ** Properly Setup MMIO resources for this bus.
643 ** pci_alloc_primary_bus() mangles this.
644 */
Grant Grundler9785d642009-01-28 22:30:55 -0700645 if (bus->parent) {
Matthew Wilcox9611f612007-10-14 10:13:31 -0400646 int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647 /* PCI-PCI Bridge */
648 pci_read_bridge_bases(bus);
Matthew Wilcox9611f612007-10-14 10:13:31 -0400649 for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
650 pci_claim_resource(bus->self, i);
651 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700652 } else {
653 /* Host-PCI Bridge */
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -0600654 int err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655
656 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
657 ldev->hba.io_space.name,
658 ldev->hba.io_space.start, ldev->hba.io_space.end,
659 ldev->hba.io_space.flags);
660 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
661 ldev->hba.lmmio_space.name,
662 ldev->hba.lmmio_space.start, ldev->hba.lmmio_space.end,
663 ldev->hba.lmmio_space.flags);
664
665 err = request_resource(&ioport_resource, &(ldev->hba.io_space));
666 if (err < 0) {
667 lba_dump_res(&ioport_resource, 2);
668 BUG();
669 }
670
671 if (ldev->hba.elmmio_space.start) {
672 err = request_resource(&iomem_resource,
673 &(ldev->hba.elmmio_space));
674 if (err < 0) {
675
676 printk("FAILED: lba_fixup_bus() request for "
677 "elmmio_space [%lx/%lx]\n",
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700678 (long)ldev->hba.elmmio_space.start,
679 (long)ldev->hba.elmmio_space.end);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680
681 /* lba_dump_res(&iomem_resource, 2); */
682 /* BUG(); */
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -0600683 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700684 }
685
Bjorn Helgaasf4d9ea92011-10-28 16:27:17 -0600686 if (ldev->hba.lmmio_space.flags) {
Grant Grundler6ca45a22006-01-10 20:47:56 -0500687 err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space));
688 if (err < 0) {
689 printk(KERN_ERR "FAILED: lba_fixup_bus() request for "
Linus Torvalds1da177e2005-04-16 15:20:36 -0700690 "lmmio_space [%lx/%lx]\n",
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700691 (long)ldev->hba.lmmio_space.start,
692 (long)ldev->hba.lmmio_space.end);
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -0600693 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694 }
695
696#ifdef CONFIG_64BIT
697 /* GMMIO is distributed range. Every LBA/Rope gets part it. */
698 if (ldev->hba.gmmio_space.flags) {
699 err = request_resource(&iomem_resource, &(ldev->hba.gmmio_space));
700 if (err < 0) {
701 printk("FAILED: lba_fixup_bus() request for "
702 "gmmio_space [%lx/%lx]\n",
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700703 (long)ldev->hba.gmmio_space.start,
704 (long)ldev->hba.gmmio_space.end);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700705 lba_dump_res(&iomem_resource, 2);
706 BUG();
707 }
708 }
709#endif
710
Linus Torvalds1da177e2005-04-16 15:20:36 -0700711 }
712
Bjorn Helgaas0b79ca22012-08-16 16:45:02 -0600713 list_for_each_entry(dev, &bus->devices, bus_list) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700714 int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700715
716 DBG("lba_fixup_bus() %s\n", pci_name(dev));
717
718 /* Virtualize Device/Bridge Resources. */
719 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
720 struct resource *res = &dev->resource[i];
721
722 /* If resource not allocated - skip it */
723 if (!res->start)
724 continue;
725
Kyle McMartin84f45062007-12-06 09:38:26 -0800726 /*
727 ** FIXME: this will result in whinging for devices
728 ** that share expansion ROMs (think quad tulip), but
729 ** isn't harmful.
730 */
731 pci_claim_resource(dev, i);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700732 }
733
734#ifdef FBB_SUPPORT
735 /*
736 ** If one device does not support FBB transfers,
737 ** No one on the bus can be allowed to use them.
738 */
739 (void) pci_read_config_word(dev, PCI_STATUS, &status);
740 bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
741#endif
742
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743 /*
744 ** P2PB's have no IRQs. ignore them.
745 */
746 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
747 continue;
748
749 /* Adjust INTERRUPT_LINE for this dev */
750 iosapic_fixup_irq(ldev->iosapic_obj, dev);
751 }
752
753#ifdef FBB_SUPPORT
754/* FIXME/REVISIT - finish figuring out to set FBB on both
755** pci_setup_bridge() clobbers PCI_BRIDGE_CONTROL.
756** Can't fixup here anyway....garr...
757*/
758 if (fbb_enable) {
Grant Grundler9785d642009-01-28 22:30:55 -0700759 if (bus->parent) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760 u8 control;
761 /* enable on PPB */
762 (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
763 (void) pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, control | PCI_STATUS_FAST_BACK);
764
765 } else {
766 /* enable on LBA */
767 }
768 fbb_enable = PCI_COMMAND_FAST_BACK;
769 }
770
771 /* Lastly enable FBB/PERR/SERR on all devices too */
Bjorn Helgaas0b79ca22012-08-16 16:45:02 -0600772 list_for_each_entry(dev, &bus->devices, bus_list) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700773 (void) pci_read_config_word(dev, PCI_COMMAND, &status);
774 status |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR | fbb_enable;
775 (void) pci_write_config_word(dev, PCI_COMMAND, status);
776 }
777#endif
778}
779
780
Adrian Bunkdf8e5bc2008-12-02 03:28:16 +0000781static struct pci_bios_ops lba_bios_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782 .init = lba_bios_init,
783 .fixup_bus = lba_fixup_bus,
784};
785
786
787
788
789/*******************************************************
790**
791** LBA Sprockets "I/O Port" Space Accessor Functions
792**
793** This set of accessor functions is intended for use with
794** "legacy firmware" (ie Sprockets on Allegro/Forte boxes).
795**
796** Many PCI devices don't require use of I/O port space (eg Tulip,
797** NCR720) since they export the same registers to both MMIO and
798** I/O port space. In general I/O port space is slower than
799** MMIO since drivers are designed so PIO writes can be posted.
800**
801********************************************************/
802
803#define LBA_PORT_IN(size, mask) \
804static u##size lba_astro_in##size (struct pci_hba_data *d, u16 addr) \
805{ \
806 u##size t; \
807 t = READ_REG##size(astro_iop_base + addr); \
808 DBG_PORT(" 0x%x\n", t); \
809 return (t); \
810}
811
812LBA_PORT_IN( 8, 3)
813LBA_PORT_IN(16, 2)
814LBA_PORT_IN(32, 0)
815
816
817
818/*
819** BUG X4107: Ordering broken - DMA RD return can bypass PIO WR
820**
821** Fixed in Elroy 2.2. The READ_U32(..., LBA_FUNC_ID) below is
822** guarantee non-postable completion semantics - not avoid X4107.
823** The READ_U32 only guarantees the write data gets to elroy but
824** out to the PCI bus. We can't read stuff from I/O port space
825** since we don't know what has side-effects. Attempting to read
826** from configuration space would be suicidal given the number of
827** bugs in that elroy functionality.
828**
829** Description:
830** DMA read results can improperly pass PIO writes (X4107). The
831** result of this bug is that if a processor modifies a location in
832** memory after having issued PIO writes, the PIO writes are not
833** guaranteed to be completed before a PCI device is allowed to see
834** the modified data in a DMA read.
835**
836** Note that IKE bug X3719 in TR1 IKEs will result in the same
837** symptom.
838**
839** Workaround:
840** The workaround for this bug is to always follow a PIO write with
841** a PIO read to the same bus before starting DMA on that PCI bus.
842**
843*/
844#define LBA_PORT_OUT(size, mask) \
845static void lba_astro_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
846{ \
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700847 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, d, addr, val); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848 WRITE_REG##size(val, astro_iop_base + addr); \
849 if (LBA_DEV(d)->hw_rev < 3) \
850 lba_t32 = READ_U32(d->base_addr + LBA_FUNC_ID); \
851}
852
853LBA_PORT_OUT( 8, 3)
854LBA_PORT_OUT(16, 2)
855LBA_PORT_OUT(32, 0)
856
857
858static struct pci_port_ops lba_astro_port_ops = {
859 .inb = lba_astro_in8,
860 .inw = lba_astro_in16,
861 .inl = lba_astro_in32,
862 .outb = lba_astro_out8,
863 .outw = lba_astro_out16,
864 .outl = lba_astro_out32
865};
866
867
868#ifdef CONFIG_64BIT
869#define PIOP_TO_GMMIO(lba, addr) \
870 ((lba)->iop_base + (((addr)&0xFFFC)<<10) + ((addr)&3))
871
872/*******************************************************
873**
874** LBA PAT "I/O Port" Space Accessor Functions
875**
876** This set of accessor functions is intended for use with
877** "PAT PDC" firmware (ie Prelude/Rhapsody/Piranha boxes).
878**
879** This uses the PIOP space located in the first 64MB of GMMIO.
880** Each rope gets a full 64*KB* (ie 4 bytes per page) this way.
881** bits 1:0 stay the same. bits 15:2 become 25:12.
882** Then add the base and we can generate an I/O Port cycle.
883********************************************************/
884#undef LBA_PORT_IN
885#define LBA_PORT_IN(size, mask) \
886static u##size lba_pat_in##size (struct pci_hba_data *l, u16 addr) \
887{ \
888 u##size t; \
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700889 DBG_PORT("%s(0x%p, 0x%x) ->", __func__, l, addr); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 t = READ_REG##size(PIOP_TO_GMMIO(LBA_DEV(l), addr)); \
891 DBG_PORT(" 0x%x\n", t); \
892 return (t); \
893}
894
895LBA_PORT_IN( 8, 3)
896LBA_PORT_IN(16, 2)
897LBA_PORT_IN(32, 0)
898
899
900#undef LBA_PORT_OUT
901#define LBA_PORT_OUT(size, mask) \
902static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \
903{ \
Matthew Wilcoxc2c47982006-10-26 10:06:07 -0600904 void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700905 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, l, addr, val); \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700906 WRITE_REG##size(val, where); \
907 /* flush the I/O down to the elroy at least */ \
908 lba_t32 = READ_U32(l->base_addr + LBA_FUNC_ID); \
909}
910
911LBA_PORT_OUT( 8, 3)
912LBA_PORT_OUT(16, 2)
913LBA_PORT_OUT(32, 0)
914
915
916static struct pci_port_ops lba_pat_port_ops = {
917 .inb = lba_pat_in8,
918 .inw = lba_pat_in16,
919 .inl = lba_pat_in32,
920 .outb = lba_pat_out8,
921 .outw = lba_pat_out16,
922 .outl = lba_pat_out32
923};
924
925
926
927/*
928** make range information from PDC available to PCI subsystem.
929** We make the PDC call here in order to get the PCI bus range
930** numbers. The rest will get forwarded in pcibios_fixup_bus().
931** We don't have a struct pci_bus assigned to us yet.
932*/
933static void
934lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
935{
936 unsigned long bytecnt;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700937 long io_count;
938 long status; /* PDC return status */
939 long pa_count;
Grant Grundlere957f602009-06-23 11:03:11 -0400940 pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */
941 pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942 int i;
943
Grant Grundlere957f602009-06-23 11:03:11 -0400944 pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
945 if (!pa_pdc_cell)
946 return;
947
948 io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
Stoyan Gaydarov450d6e32009-07-30 10:25:19 +0000949 if (!io_pdc_cell) {
Grant Grundlere957f602009-06-23 11:03:11 -0400950 kfree(pa_pdc_cell);
951 return;
952 }
953
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954 /* return cell module (IO view) */
955 status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
Grant Grundlere957f602009-06-23 11:03:11 -0400956 PA_VIEW, pa_pdc_cell);
957 pa_count = pa_pdc_cell->mod[1];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958
959 status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
Grant Grundlere957f602009-06-23 11:03:11 -0400960 IO_VIEW, io_pdc_cell);
961 io_count = io_pdc_cell->mod[1];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700962
963 /* We've already done this once for device discovery...*/
964 if (status != PDC_OK) {
965 panic("pdc_pat_cell_module() call failed for LBA!\n");
966 }
967
Grant Grundlere957f602009-06-23 11:03:11 -0400968 if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700969 panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
970 }
971
972 /*
973 ** Inspect the resources PAT tells us about
974 */
975 for (i = 0; i < pa_count; i++) {
976 struct {
977 unsigned long type;
978 unsigned long start;
979 unsigned long end; /* aka finish */
980 } *p, *io;
981 struct resource *r;
982
Grant Grundlere957f602009-06-23 11:03:11 -0400983 p = (void *) &(pa_pdc_cell->mod[2+i*3]);
984 io = (void *) &(io_pdc_cell->mod[2+i*3]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700985
986 /* Convert the PAT range data to PCI "struct resource" */
987 switch(p->type & 0xff) {
988 case PAT_PBNUM:
989 lba_dev->hba.bus_num.start = p->start;
990 lba_dev->hba.bus_num.end = p->end;
Yinghai Lu30aa80d2012-05-17 18:51:12 -0700991 lba_dev->hba.bus_num.flags = IORESOURCE_BUS;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700992 break;
993
994 case PAT_LMMIO:
995 /* used to fix up pre-initialized MEM BARs */
996 if (!lba_dev->hba.lmmio_space.start) {
997 sprintf(lba_dev->hba.lmmio_name,
Matthew Wilcox645d11d2006-12-24 19:28:42 -0700998 "PCI%02x LMMIO",
999 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001000 lba_dev->hba.lmmio_space_offset = p->start -
1001 io->start;
1002 r = &lba_dev->hba.lmmio_space;
1003 r->name = lba_dev->hba.lmmio_name;
1004 } else if (!lba_dev->hba.elmmio_space.start) {
1005 sprintf(lba_dev->hba.elmmio_name,
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001006 "PCI%02x ELMMIO",
1007 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001008 r = &lba_dev->hba.elmmio_space;
1009 r->name = lba_dev->hba.elmmio_name;
1010 } else {
1011 printk(KERN_WARNING MODULE_NAME
1012 " only supports 2 LMMIO resources!\n");
1013 break;
1014 }
1015
1016 r->start = p->start;
1017 r->end = p->end;
1018 r->flags = IORESOURCE_MEM;
1019 r->parent = r->sibling = r->child = NULL;
1020 break;
1021
1022 case PAT_GMMIO:
1023 /* MMIO space > 4GB phys addr; for 64-bit BAR */
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001024 sprintf(lba_dev->hba.gmmio_name, "PCI%02x GMMIO",
1025 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026 r = &lba_dev->hba.gmmio_space;
1027 r->name = lba_dev->hba.gmmio_name;
1028 r->start = p->start;
1029 r->end = p->end;
1030 r->flags = IORESOURCE_MEM;
1031 r->parent = r->sibling = r->child = NULL;
1032 break;
1033
1034 case PAT_NPIOP:
1035 printk(KERN_WARNING MODULE_NAME
1036 " range[%d] : ignoring NPIOP (0x%lx)\n",
1037 i, p->start);
1038 break;
1039
1040 case PAT_PIOP:
1041 /*
1042 ** Postable I/O port space is per PCI host adapter.
1043 ** base of 64MB PIOP region
1044 */
Helge Deller5076c152006-03-27 12:52:15 -07001045 lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001046
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001047 sprintf(lba_dev->hba.io_name, "PCI%02x Ports",
1048 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 r = &lba_dev->hba.io_space;
1050 r->name = lba_dev->hba.io_name;
1051 r->start = HBA_PORT_BASE(lba_dev->hba.hba_num);
1052 r->end = r->start + HBA_PORT_SPACE_SIZE - 1;
1053 r->flags = IORESOURCE_IO;
1054 r->parent = r->sibling = r->child = NULL;
1055 break;
1056
1057 default:
1058 printk(KERN_WARNING MODULE_NAME
1059 " range[%d] : unknown pat range type (0x%lx)\n",
1060 i, p->type & 0xff);
1061 break;
1062 }
1063 }
Grant Grundlere957f602009-06-23 11:03:11 -04001064
1065 kfree(pa_pdc_cell);
1066 kfree(io_pdc_cell);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067}
1068#else
1069/* keep compiler from complaining about missing declarations */
1070#define lba_pat_port_ops lba_astro_port_ops
1071#define lba_pat_resources(pa_dev, lba_dev)
1072#endif /* CONFIG_64BIT */
1073
1074
1075extern void sba_distributed_lmmio(struct parisc_device *, struct resource *);
1076extern void sba_directed_lmmio(struct parisc_device *, struct resource *);
1077
1078
1079static void
1080lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
1081{
1082 struct resource *r;
1083 int lba_num;
1084
1085 lba_dev->hba.lmmio_space_offset = PCI_F_EXTEND;
1086
1087 /*
1088 ** With "legacy" firmware, the lowest byte of FW_SCRATCH
1089 ** represents bus->secondary and the second byte represents
1090 ** bus->subsidiary (i.e. highest PPB programmed by firmware).
1091 ** PCI bus walk *should* end up with the same result.
1092 ** FIXME: But we don't have sanity checks in PCI or LBA.
1093 */
1094 lba_num = READ_REG32(lba_dev->hba.base_addr + LBA_FW_SCRATCH);
1095 r = &(lba_dev->hba.bus_num);
1096 r->name = "LBA PCI Busses";
1097 r->start = lba_num & 0xff;
1098 r->end = (lba_num>>8) & 0xff;
1099
1100 /* Set up local PCI Bus resources - we don't need them for
1101 ** Legacy boxes but it's nice to see in /proc/iomem.
1102 */
1103 r = &(lba_dev->hba.lmmio_space);
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001104 sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO",
1105 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106 r->name = lba_dev->hba.lmmio_name;
1107
1108#if 1
1109 /* We want the CPU -> IO routing of addresses.
1110 * The SBA BASE/MASK registers control CPU -> IO routing.
1111 * Ask SBA what is routed to this rope/LBA.
1112 */
1113 sba_distributed_lmmio(pa_dev, r);
1114#else
1115 /*
1116 * The LBA BASE/MASK registers control IO -> System routing.
1117 *
1118 * The following code works but doesn't get us what we want.
1119 * Well, only because firmware (v5.0) on C3000 doesn't program
1120 * the LBA BASE/MASE registers to be the exact inverse of
1121 * the corresponding SBA registers. Other Astro/Pluto
1122 * based platform firmware may do it right.
1123 *
1124 * Should someone want to mess with MSI, they may need to
1125 * reprogram LBA BASE/MASK registers. Thus preserve the code
1126 * below until MSI is known to work on C3000/A500/N4000/RP3440.
1127 *
1128 * Using the code below, /proc/iomem shows:
1129 * ...
1130 * f0000000-f0ffffff : PCI00 LMMIO
1131 * f05d0000-f05d0000 : lcd_data
1132 * f05d0008-f05d0008 : lcd_cmd
1133 * f1000000-f1ffffff : PCI01 LMMIO
1134 * f4000000-f4ffffff : PCI02 LMMIO
1135 * f4000000-f4001fff : sym53c8xx
1136 * f4002000-f4003fff : sym53c8xx
1137 * f4004000-f40043ff : sym53c8xx
1138 * f4005000-f40053ff : sym53c8xx
1139 * f4007000-f4007fff : ohci_hcd
1140 * f4008000-f40083ff : tulip
1141 * f6000000-f6ffffff : PCI03 LMMIO
1142 * f8000000-fbffffff : PCI00 ELMMIO
1143 * fa100000-fa4fffff : stifb mmio
1144 * fb000000-fb1fffff : stifb fb
1145 *
1146 * But everything listed under PCI02 actually lives under PCI00.
1147 * This is clearly wrong.
1148 *
1149 * Asking SBA how things are routed tells the correct story:
1150 * LMMIO_BASE/MASK/ROUTE f4000001 fc000000 00000000
1151 * DIR0_BASE/MASK/ROUTE fa000001 fe000000 00000006
1152 * DIR1_BASE/MASK/ROUTE f9000001 ff000000 00000004
1153 * DIR2_BASE/MASK/ROUTE f0000000 fc000000 00000000
1154 * DIR3_BASE/MASK/ROUTE f0000000 fc000000 00000000
1155 *
1156 * Which looks like this in /proc/iomem:
1157 * f4000000-f47fffff : PCI00 LMMIO
1158 * f4000000-f4001fff : sym53c8xx
1159 * ...[deteled core devices - same as above]...
1160 * f4008000-f40083ff : tulip
1161 * f4800000-f4ffffff : PCI01 LMMIO
1162 * f6000000-f67fffff : PCI02 LMMIO
1163 * f7000000-f77fffff : PCI03 LMMIO
1164 * f9000000-f9ffffff : PCI02 ELMMIO
1165 * fa000000-fbffffff : PCI03 ELMMIO
1166 * fa100000-fa4fffff : stifb mmio
1167 * fb000000-fb1fffff : stifb fb
1168 *
1169 * ie all Built-in core are under now correctly under PCI00.
1170 * The "PCI02 ELMMIO" directed range is for:
1171 * +-[02]---03.0 3Dfx Interactive, Inc. Voodoo 2
1172 *
1173 * All is well now.
1174 */
1175 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_BASE);
1176 if (r->start & 1) {
1177 unsigned long rsize;
1178
1179 r->flags = IORESOURCE_MEM;
1180 /* mmio_mask also clears Enable bit */
1181 r->start &= mmio_mask;
1182 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start);
1183 rsize = ~ READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_MASK);
1184
1185 /*
1186 ** Each rope only gets part of the distributed range.
1187 ** Adjust "window" for this rope.
1188 */
1189 rsize /= ROPES_PER_IOC;
Matthew Wilcox53f01bb2005-10-21 22:36:40 -04001190 r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001191 r->end = r->start + rsize;
1192 } else {
1193 r->end = r->start = 0; /* Not enabled. */
1194 }
1195#endif
1196
1197 /*
1198 ** "Directed" ranges are used when the "distributed range" isn't
1199 ** sufficient for all devices below a given LBA. Typically devices
1200 ** like graphics cards or X25 may need a directed range when the
1201 ** bus has multiple slots (ie multiple devices) or the device
1202 ** needs more than the typical 4 or 8MB a distributed range offers.
1203 **
1204 ** The main reason for ignoring it now frigging complications.
1205 ** Directed ranges may overlap (and have precedence) over
1206 ** distributed ranges. Or a distributed range assigned to a unused
1207 ** rope may be used by a directed range on a different rope.
1208 ** Support for graphics devices may require fixing this
1209 ** since they may be assigned a directed range which overlaps
1210 ** an existing (but unused portion of) distributed range.
1211 */
1212 r = &(lba_dev->hba.elmmio_space);
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001213 sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO",
1214 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001215 r->name = lba_dev->hba.elmmio_name;
1216
1217#if 1
1218 /* See comment which precedes call to sba_directed_lmmio() */
1219 sba_directed_lmmio(pa_dev, r);
1220#else
1221 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_BASE);
1222
1223 if (r->start & 1) {
1224 unsigned long rsize;
1225 r->flags = IORESOURCE_MEM;
1226 /* mmio_mask also clears Enable bit */
1227 r->start &= mmio_mask;
1228 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start);
1229 rsize = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_MASK);
1230 r->end = r->start + ~rsize;
1231 }
1232#endif
1233
1234 r = &(lba_dev->hba.io_space);
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001235 sprintf(lba_dev->hba.io_name, "PCI%02x Ports",
1236 (int)lba_dev->hba.bus_num.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001237 r->name = lba_dev->hba.io_name;
1238 r->flags = IORESOURCE_IO;
1239 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_IOS_BASE) & ~1L;
1240 r->end = r->start + (READ_REG32(lba_dev->hba.base_addr + LBA_IOS_MASK) ^ (HBA_PORT_SPACE_SIZE - 1));
1241
1242 /* Virtualize the I/O Port space ranges */
1243 lba_num = HBA_PORT_BASE(lba_dev->hba.hba_num);
1244 r->start |= lba_num;
1245 r->end |= lba_num;
1246}
1247
1248
1249/**************************************************************************
1250**
1251** LBA initialization code (HW and SW)
1252**
1253** o identify LBA chip itself
1254** o initialize LBA chip modes (HardFail)
1255** o FIXME: initialize DMA hints for reasonable defaults
1256** o enable configuration functions
1257** o call pci_register_ops() to discover devs (fixup/fixup_bus get invoked)
1258**
1259**************************************************************************/
1260
1261static int __init
1262lba_hw_init(struct lba_device *d)
1263{
1264 u32 stat;
1265 u32 bus_reset; /* PDC_PAT_BUG */
1266
1267#if 0
1268 printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n",
1269 d->hba.base_addr,
1270 READ_REG64(d->hba.base_addr + LBA_STAT_CTL),
1271 READ_REG64(d->hba.base_addr + LBA_ERROR_CONFIG),
1272 READ_REG64(d->hba.base_addr + LBA_ERROR_STATUS),
1273 READ_REG64(d->hba.base_addr + LBA_DMA_CTL) );
1274 printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n",
1275 READ_REG64(d->hba.base_addr + LBA_ARB_MASK),
1276 READ_REG64(d->hba.base_addr + LBA_ARB_PRI),
1277 READ_REG64(d->hba.base_addr + LBA_ARB_MODE),
1278 READ_REG64(d->hba.base_addr + LBA_ARB_MTLT) );
1279 printk(KERN_DEBUG " HINT cfg 0x%Lx\n",
1280 READ_REG64(d->hba.base_addr + LBA_HINT_CFG));
1281 printk(KERN_DEBUG " HINT reg ");
1282 { int i;
1283 for (i=LBA_HINT_BASE; i< (14*8 + LBA_HINT_BASE); i+=8)
1284 printk(" %Lx", READ_REG64(d->hba.base_addr + i));
1285 }
1286 printk("\n");
1287#endif /* DEBUG_LBA_PAT */
1288
1289#ifdef CONFIG_64BIT
1290/*
1291 * FIXME add support for PDC_PAT_IO "Get slot status" - OLAR support
1292 * Only N-Class and up can really make use of Get slot status.
1293 * maybe L-class too but I've never played with it there.
1294 */
1295#endif
1296
1297 /* PDC_PAT_BUG: exhibited in rev 40.48 on L2000 */
1298 bus_reset = READ_REG32(d->hba.base_addr + LBA_STAT_CTL + 4) & 1;
1299 if (bus_reset) {
1300 printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n");
1301 }
1302
1303 stat = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG);
1304 if (stat & LBA_SMART_MODE) {
1305 printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n");
1306 stat &= ~LBA_SMART_MODE;
1307 WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG);
1308 }
1309
1310 /* Set HF mode as the default (vs. -1 mode). */
1311 stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL);
1312 WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
1313
1314 /*
1315 ** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal
1316 ** if it's not already set. If we just cleared the PCI Bus Reset
1317 ** signal, wait a bit for the PCI devices to recover and setup.
1318 */
1319 if (bus_reset)
1320 mdelay(pci_post_reset_delay);
1321
1322 if (0 == READ_REG32(d->hba.base_addr + LBA_ARB_MASK)) {
1323 /*
1324 ** PDC_PAT_BUG: PDC rev 40.48 on L2000.
1325 ** B2000/C3600/J6000 also have this problem?
1326 **
1327 ** Elroys with hot pluggable slots don't get configured
1328 ** correctly if the slot is empty. ARB_MASK is set to 0
1329 ** and we can't master transactions on the bus if it's
1330 ** not at least one. 0x3 enables elroy and first slot.
1331 */
1332 printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n");
1333 WRITE_REG32(0x3, d->hba.base_addr + LBA_ARB_MASK);
1334 }
1335
1336 /*
1337 ** FIXME: Hint registers are programmed with default hint
1338 ** values by firmware. Hints should be sane even if we
1339 ** can't reprogram them the way drivers want.
1340 */
1341 return 0;
1342}
1343
Matthew Wilcox353dfe12006-11-18 10:11:03 -07001344/*
1345 * Unfortunately, when firmware numbers busses, it doesn't take into account
1346 * Cardbus bridges. So we have to renumber the busses to suit ourselves.
1347 * Elroy/Mercury don't actually know what bus number they're attached to;
1348 * we use bus 0 to indicate the directly attached bus and any other bus
1349 * number will be taken care of by the PCI-PCI bridge.
1350 */
1351static unsigned int lba_next_bus = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001352
1353/*
Matthew Wilcox353dfe12006-11-18 10:11:03 -07001354 * Determine if lba should claim this chip (return 0) or not (return 1).
1355 * If so, initialize the chip and tell other partners in crime they
1356 * have work to do.
1357 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001358static int __init
1359lba_driver_probe(struct parisc_device *dev)
1360{
1361 struct lba_device *lba_dev;
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001362 LIST_HEAD(resources);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001363 struct pci_bus *lba_bus;
1364 struct pci_ops *cfg_ops;
1365 u32 func_class;
1366 void *tmp_obj;
1367 char *version;
Helge Deller5076c152006-03-27 12:52:15 -07001368 void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096);
Yinghai Lu30aa80d2012-05-17 18:51:12 -07001369 int max;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001370
1371 /* Read HW Rev First */
1372 func_class = READ_REG32(addr + LBA_FCLASS);
1373
1374 if (IS_ELROY(dev)) {
1375 func_class &= 0xf;
1376 switch (func_class) {
1377 case 0: version = "TR1.0"; break;
1378 case 1: version = "TR2.0"; break;
1379 case 2: version = "TR2.1"; break;
1380 case 3: version = "TR2.2"; break;
1381 case 4: version = "TR3.0"; break;
1382 case 5: version = "TR4.0"; break;
1383 default: version = "TR4+";
1384 }
1385
Kyle McMartinba9877b2006-08-24 21:28:58 -04001386 printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n",
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001387 version, func_class & 0xf, (long)dev->hpa.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001388
1389 if (func_class < 2) {
1390 printk(KERN_WARNING "Can't support LBA older than "
1391 "TR2.1 - continuing under adversity.\n");
1392 }
1393
1394#if 0
1395/* Elroy TR4.0 should work with simple algorithm.
1396 But it doesn't. Still missing something. *sigh*
1397*/
1398 if (func_class > 4) {
1399 cfg_ops = &mercury_cfg_ops;
1400 } else
1401#endif
1402 {
1403 cfg_ops = &elroy_cfg_ops;
1404 }
1405
1406 } else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) {
Kyle McMartinba9877b2006-08-24 21:28:58 -04001407 int major, minor;
1408
Linus Torvalds1da177e2005-04-16 15:20:36 -07001409 func_class &= 0xff;
Kyle McMartinba9877b2006-08-24 21:28:58 -04001410 major = func_class >> 4, minor = func_class & 0xf;
1411
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412 /* We could use one printk for both Elroy and Mercury,
1413 * but for the mask for func_class.
1414 */
Kyle McMartinba9877b2006-08-24 21:28:58 -04001415 printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n",
1416 IS_MERCURY(dev) ? "Mercury" : "Quicksilver", major,
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001417 minor, func_class, (long)dev->hpa.start);
Kyle McMartinba9877b2006-08-24 21:28:58 -04001418
Linus Torvalds1da177e2005-04-16 15:20:36 -07001419 cfg_ops = &mercury_cfg_ops;
1420 } else {
Matthew Wilcox645d11d2006-12-24 19:28:42 -07001421 printk(KERN_ERR "Unknown LBA found at 0x%lx\n",
1422 (long)dev->hpa.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001423 return -ENODEV;
1424 }
1425
Matthew Wilcox353dfe12006-11-18 10:11:03 -07001426 /* Tell I/O SAPIC driver we have a IRQ handler/region. */
Matthew Wilcox53f01bb2005-10-21 22:36:40 -04001427 tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428
1429 /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
1430 ** have an IRT entry will get NULL back from iosapic code.
1431 */
1432
Helge Dellercb6fc182006-01-17 12:40:40 -07001433 lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001434 if (!lba_dev) {
1435 printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n");
1436 return(1);
1437 }
1438
Linus Torvalds1da177e2005-04-16 15:20:36 -07001439
1440 /* ---------- First : initialize data we already have --------- */
1441
1442 lba_dev->hw_rev = func_class;
1443 lba_dev->hba.base_addr = addr;
1444 lba_dev->hba.dev = dev;
1445 lba_dev->iosapic_obj = tmp_obj; /* save interrupt handle */
1446 lba_dev->hba.iommu = sba_get_iommu(dev); /* get iommu data */
Kyle McMartinb0eecc42006-08-24 21:31:41 -04001447 parisc_set_drvdata(dev, lba_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001448
1449 /* ------------ Second : initialize common stuff ---------- */
1450 pci_bios = &lba_bios_ops;
1451 pcibios_register_hba(HBA_DATA(lba_dev));
1452 spin_lock_init(&lba_dev->lba_lock);
1453
1454 if (lba_hw_init(lba_dev))
1455 return(1);
1456
1457 /* ---------- Third : setup I/O Port and MMIO resources --------- */
1458
1459 if (is_pdc_pat()) {
1460 /* PDC PAT firmware uses PIOP region of GMMIO space. */
1461 pci_port = &lba_pat_port_ops;
1462 /* Go ask PDC PAT what resources this LBA has */
1463 lba_pat_resources(dev, lba_dev);
1464 } else {
1465 if (!astro_iop_base) {
1466 /* Sprockets PDC uses NPIOP region */
Helge Deller5076c152006-03-27 12:52:15 -07001467 astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001468 pci_port = &lba_astro_port_ops;
1469 }
1470
1471 /* Poke the chip a bit for /proc output */
1472 lba_legacy_resources(dev, lba_dev);
1473 }
1474
Matthew Wilcox353dfe12006-11-18 10:11:03 -07001475 if (lba_dev->hba.bus_num.start < lba_next_bus)
1476 lba_dev->hba.bus_num.start = lba_next_bus;
1477
Bjorn Helgaasf4d9ea92011-10-28 16:27:17 -06001478 /* Overlaps with elmmio can (and should) fail here.
1479 * We will prune (or ignore) the distributed range.
1480 *
1481 * FIXME: SBA code should register all elmmio ranges first.
1482 * that would take care of elmmio ranges routed
1483 * to a different rope (already discovered) from
1484 * getting registered *after* LBA code has already
1485 * registered it's distributed lmmio range.
1486 */
1487 if (truncate_pat_collision(&iomem_resource,
1488 &(lba_dev->hba.lmmio_space))) {
1489 printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
1490 (long)lba_dev->hba.lmmio_space.start,
1491 (long)lba_dev->hba.lmmio_space.end);
1492 lba_dev->hba.lmmio_space.flags = 0;
1493 }
1494
Bjorn Helgaas39c24622012-02-23 20:19:03 -07001495 pci_add_resource_offset(&resources, &lba_dev->hba.io_space,
1496 HBA_PORT_BASE(lba_dev->hba.hba_num));
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001497 if (lba_dev->hba.elmmio_space.start)
Bjorn Helgaas39c24622012-02-23 20:19:03 -07001498 pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space,
1499 lba_dev->hba.lmmio_space_offset);
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001500 if (lba_dev->hba.lmmio_space.flags)
Bjorn Helgaas39c24622012-02-23 20:19:03 -07001501 pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space,
1502 lba_dev->hba.lmmio_space_offset);
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001503 if (lba_dev->hba.gmmio_space.flags)
1504 pci_add_resource(&resources, &lba_dev->hba.gmmio_space);
1505
Yinghai Lu30aa80d2012-05-17 18:51:12 -07001506 pci_add_resource(&resources, &lba_dev->hba.bus_num);
1507
Linus Torvalds1da177e2005-04-16 15:20:36 -07001508 dev->dev.platform_data = lba_dev;
1509 lba_bus = lba_dev->hba.hba_bus =
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001510 pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start,
1511 cfg_ops, NULL, &resources);
1512 if (!lba_bus) {
1513 pci_free_resource_list(&resources);
Bjorn Helgaas42605fa2011-10-28 16:27:22 -06001514 return 0;
Bjorn Helgaasdc7dce22011-10-28 16:27:27 -06001515 }
Bjorn Helgaas42605fa2011-10-28 16:27:22 -06001516
Yinghai Lu30aa80d2012-05-17 18:51:12 -07001517 max = pci_scan_child_bus(lba_bus);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518
1519 /* This is in lieu of calling pci_assign_unassigned_resources() */
1520 if (is_pdc_pat()) {
1521 /* assign resources to un-initialized devices */
1522
1523 DBG_PAT("LBA pci_bus_size_bridges()\n");
1524 pci_bus_size_bridges(lba_bus);
1525
1526 DBG_PAT("LBA pci_bus_assign_resources()\n");
1527 pci_bus_assign_resources(lba_bus);
1528
1529#ifdef DEBUG_LBA_PAT
1530 DBG_PAT("\nLBA PIOP resource tree\n");
1531 lba_dump_res(&lba_dev->hba.io_space, 2);
1532 DBG_PAT("\nLBA LMMIO resource tree\n");
1533 lba_dump_res(&lba_dev->hba.lmmio_space, 2);
1534#endif
1535 }
1536 pci_enable_bridges(lba_bus);
1537
Linus Torvalds1da177e2005-04-16 15:20:36 -07001538 /*
1539 ** Once PCI register ops has walked the bus, access to config
1540 ** space is restricted. Avoids master aborts on config cycles.
1541 ** Early LBA revs go fatal on *any* master abort.
1542 */
1543 if (cfg_ops == &elroy_cfg_ops) {
1544 lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
1545 }
1546
Yinghai Lu30aa80d2012-05-17 18:51:12 -07001547 lba_next_bus = max + 1;
Bjorn Helgaas42605fa2011-10-28 16:27:22 -06001548 pci_bus_add_devices(lba_bus);
Grant Grundlerfed99b12009-04-20 04:28:22 +00001549
Linus Torvalds1da177e2005-04-16 15:20:36 -07001550 /* Whew! Finally done! Tell services we got this one covered. */
1551 return 0;
1552}
1553
1554static struct parisc_device_id lba_tbl[] = {
1555 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, ELROY_HVERS, 0xa },
1556 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, MERCURY_HVERS, 0xa },
1557 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, QUICKSILVER_HVERS, 0xa },
1558 { 0, }
1559};
1560
1561static struct parisc_driver lba_driver = {
1562 .name = MODULE_NAME,
1563 .id_table = lba_tbl,
1564 .probe = lba_driver_probe,
1565};
1566
1567/*
1568** One time initialization to let the world know the LBA was found.
1569** Must be called exactly once before pci_init().
1570*/
1571void __init lba_init(void)
1572{
1573 register_parisc_driver(&lba_driver);
1574}
1575
1576/*
1577** Initialize the IBASE/IMASK registers for LBA (Elroy).
1578** Only called from sba_iommu.c in order to route ranges (MMIO vs DMA).
1579** sba_iommu is responsible for locking (none needed at init time).
1580*/
1581void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
1582{
Helge Deller5076c152006-03-27 12:52:15 -07001583 void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584
1585 imask <<= 2; /* adjust for hints - 2 more bits */
1586
1587 /* Make sure we aren't trying to set bits that aren't writeable. */
1588 WARN_ON((ibase & 0x001fffff) != 0);
1589 WARN_ON((imask & 0x001fffff) != 0);
1590
Harvey Harrisona8043ec2008-05-14 16:21:56 -07001591 DBG("%s() ibase 0x%x imask 0x%x\n", __func__, ibase, imask);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001592 WRITE_REG32( imask, base_addr + LBA_IMASK);
1593 WRITE_REG32( ibase, base_addr + LBA_IBASE);
1594 iounmap(base_addr);
1595}
1596