blob: 4ce52f5f241950dec7e7e4b4a19fd71939e0ffc8 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * slip.c This module implements the SLIP protocol for kernel-based
3 * devices like TTY. It interfaces between a raw TTY, and the
4 * kernel's INET protocol layers.
5 *
6 * Version: @(#)slip.c 0.8.3 12/24/94
7 *
8 * Authors: Laurence Culhane, <loz@holmes.demon.co.uk>
9 * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
10 *
11 * Fixes:
12 * Alan Cox : Sanity checks and avoid tx overruns.
13 * Has a new sl->mtu field.
14 * Alan Cox : Found cause of overrun. ifconfig sl0 mtu upwards.
15 * Driver now spots this and grows/shrinks its buffers(hack!).
16 * Memory leak if you run out of memory setting up a slip driver fixed.
17 * Matt Dillon : Printable slip (borrowed from NET2E)
18 * Pauline Middelink : Slip driver fixes.
19 * Alan Cox : Honours the old SL_COMPRESSED flag
20 * Alan Cox : KISS AX.25 and AXUI IP support
21 * Michael Riepe : Automatic CSLIP recognition added
22 * Charles Hedrick : CSLIP header length problem fix.
23 * Alan Cox : Corrected non-IP cases of the above.
24 * Alan Cox : Now uses hardware type as per FvK.
25 * Alan Cox : Default to 192.168.0.0 (RFC 1597)
26 * A.N.Kuznetsov : dev_tint() recursion fix.
27 * Dmitry Gorodchanin : SLIP memory leaks
28 * Dmitry Gorodchanin : Code cleanup. Reduce tty driver
29 * buffering from 4096 to 256 bytes.
30 * Improving SLIP response time.
31 * CONFIG_SLIP_MODE_SLIP6.
32 * ifconfig sl? up & down now works correctly.
33 * Modularization.
34 * Alan Cox : Oops - fix AX.25 buffer lengths
35 * Dmitry Gorodchanin : Even more cleanups. Preserve CSLIP
36 * statistics. Include CSLIP code only
37 * if it really needed.
38 * Alan Cox : Free slhc buffers in the right place.
39 * Alan Cox : Allow for digipeated IP over AX.25
40 * Matti Aarnio : Dynamic SLIP devices, with ideas taken
41 * from Jim Freeman's <jfree@caldera.com>
42 * dynamic PPP devices. We do NOT kfree()
43 * device entries, just reg./unreg. them
44 * as they are needed. We kfree() them
45 * at module cleanup.
46 * With MODULE-loading ``insmod'', user can
47 * issue parameter: slip_maxdev=1024
48 * (Or how much he/she wants.. Default is 256)
49 * * Stanislav Voronyi : Slip line checking, with ideas taken
50 * from multislip BSDI driver which was written
51 * by Igor Chechik, RELCOM Corp. Only algorithms
52 * have been ported to Linux SLIP driver.
53 * Vitaly E. Lavrov : Sane behaviour on tty hangup.
54 * Alexey Kuznetsov : Cleanup interfaces to tty&netdevice modules.
55 */
56
57#define SL_CHECK_TRANSMIT
58#include <linux/config.h>
59#include <linux/module.h>
60#include <linux/moduleparam.h>
61
62#include <asm/system.h>
63#include <asm/uaccess.h>
64#include <linux/bitops.h>
65#include <linux/string.h>
66#include <linux/mm.h>
67#include <linux/interrupt.h>
68#include <linux/in.h>
69#include <linux/tty.h>
70#include <linux/errno.h>
71#include <linux/netdevice.h>
72#include <linux/etherdevice.h>
73#include <linux/skbuff.h>
74#include <linux/rtnetlink.h>
75#include <linux/if_arp.h>
76#include <linux/if_slip.h>
77#include <linux/init.h>
78#include "slip.h"
79#ifdef CONFIG_INET
80#include <linux/ip.h>
81#include <linux/tcp.h>
82#include <net/slhc_vj.h>
83#endif
84
85#define SLIP_VERSION "0.8.4-NET3.019-NEWTTY"
86
87static struct net_device **slip_devs;
88
89static int slip_maxdev = SL_NRUNIT;
90module_param(slip_maxdev, int, 0);
91MODULE_PARM_DESC(slip_maxdev, "Maximum number of slip devices");
92
93static int slip_esc(unsigned char *p, unsigned char *d, int len);
94static void slip_unesc(struct slip *sl, unsigned char c);
95#ifdef CONFIG_SLIP_MODE_SLIP6
96static int slip_esc6(unsigned char *p, unsigned char *d, int len);
97static void slip_unesc6(struct slip *sl, unsigned char c);
98#endif
99#ifdef CONFIG_SLIP_SMART
100static void sl_keepalive(unsigned long sls);
101static void sl_outfill(unsigned long sls);
102static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd);
103#endif
104
105/********************************
106* Buffer administration routines:
107* sl_alloc_bufs()
108* sl_free_bufs()
109* sl_realloc_bufs()
110*
111* NOTE: sl_realloc_bufs != sl_free_bufs + sl_alloc_bufs, because
112* sl_realloc_bufs provides strong atomicity and reallocation
113* on actively running device.
114*********************************/
115
116/*
117 Allocate channel buffers.
118 */
119
120static int
121sl_alloc_bufs(struct slip *sl, int mtu)
122{
123 int err = -ENOBUFS;
124 unsigned long len;
125 char * rbuff = NULL;
126 char * xbuff = NULL;
127#ifdef SL_INCLUDE_CSLIP
128 char * cbuff = NULL;
129 struct slcompress *slcomp = NULL;
130#endif
131
132 /*
133 * Allocate the SLIP frame buffers:
134 *
135 * rbuff Receive buffer.
136 * xbuff Transmit buffer.
137 * cbuff Temporary compression buffer.
138 */
139 len = mtu * 2;
140
141 /*
142 * allow for arrival of larger UDP packets, even if we say not to
143 * also fixes a bug in which SunOS sends 512-byte packets even with
144 * an MSS of 128
145 */
146 if (len < 576 * 2)
147 len = 576 * 2;
148 rbuff = kmalloc(len + 4, GFP_KERNEL);
149 if (rbuff == NULL)
150 goto err_exit;
151 xbuff = kmalloc(len + 4, GFP_KERNEL);
152 if (xbuff == NULL)
153 goto err_exit;
154#ifdef SL_INCLUDE_CSLIP
155 cbuff = kmalloc(len + 4, GFP_KERNEL);
156 if (cbuff == NULL)
157 goto err_exit;
158 slcomp = slhc_init(16, 16);
159 if (slcomp == NULL)
160 goto err_exit;
161#endif
162 spin_lock_bh(&sl->lock);
163 if (sl->tty == NULL) {
164 spin_unlock_bh(&sl->lock);
165 err = -ENODEV;
166 goto err_exit;
167 }
168 sl->mtu = mtu;
169 sl->buffsize = len;
170 sl->rcount = 0;
171 sl->xleft = 0;
172 rbuff = xchg(&sl->rbuff, rbuff);
173 xbuff = xchg(&sl->xbuff, xbuff);
174#ifdef SL_INCLUDE_CSLIP
175 cbuff = xchg(&sl->cbuff, cbuff);
176 slcomp = xchg(&sl->slcomp, slcomp);
177#ifdef CONFIG_SLIP_MODE_SLIP6
178 sl->xdata = 0;
179 sl->xbits = 0;
180#endif
181#endif
182 spin_unlock_bh(&sl->lock);
183 err = 0;
184
185 /* Cleanup */
186err_exit:
187#ifdef SL_INCLUDE_CSLIP
188 if (cbuff)
189 kfree(cbuff);
190 if (slcomp)
191 slhc_free(slcomp);
192#endif
193 if (xbuff)
194 kfree(xbuff);
195 if (rbuff)
196 kfree(rbuff);
197 return err;
198}
199
200/* Free a SLIP channel buffers. */
201static void
202sl_free_bufs(struct slip *sl)
203{
204 void * tmp;
205
206 /* Free all SLIP frame buffers. */
207 if ((tmp = xchg(&sl->rbuff, NULL)) != NULL)
208 kfree(tmp);
209 if ((tmp = xchg(&sl->xbuff, NULL)) != NULL)
210 kfree(tmp);
211#ifdef SL_INCLUDE_CSLIP
212 if ((tmp = xchg(&sl->cbuff, NULL)) != NULL)
213 kfree(tmp);
214 if ((tmp = xchg(&sl->slcomp, NULL)) != NULL)
215 slhc_free(tmp);
216#endif
217}
218
219/*
220 Reallocate slip channel buffers.
221 */
222
223static int sl_realloc_bufs(struct slip *sl, int mtu)
224{
225 int err = 0;
226 struct net_device *dev = sl->dev;
227 unsigned char *xbuff, *rbuff;
228#ifdef SL_INCLUDE_CSLIP
229 unsigned char *cbuff;
230#endif
231 int len = mtu * 2;
232
233/*
234 * allow for arrival of larger UDP packets, even if we say not to
235 * also fixes a bug in which SunOS sends 512-byte packets even with
236 * an MSS of 128
237 */
238 if (len < 576 * 2)
239 len = 576 * 2;
240
241 xbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
242 rbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
243#ifdef SL_INCLUDE_CSLIP
244 cbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
245#endif
246
247
248#ifdef SL_INCLUDE_CSLIP
249 if (xbuff == NULL || rbuff == NULL || cbuff == NULL) {
250#else
251 if (xbuff == NULL || rbuff == NULL) {
252#endif
253 if (mtu >= sl->mtu) {
254 printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n",
255 dev->name);
256 err = -ENOBUFS;
257 }
258 goto done;
259 }
260
261 spin_lock_bh(&sl->lock);
262
263 err = -ENODEV;
264 if (sl->tty == NULL)
265 goto done_on_bh;
266
267 xbuff = xchg(&sl->xbuff, xbuff);
268 rbuff = xchg(&sl->rbuff, rbuff);
269#ifdef SL_INCLUDE_CSLIP
270 cbuff = xchg(&sl->cbuff, cbuff);
271#endif
272 if (sl->xleft) {
273 if (sl->xleft <= len) {
274 memcpy(sl->xbuff, sl->xhead, sl->xleft);
275 } else {
276 sl->xleft = 0;
277 sl->tx_dropped++;
278 }
279 }
280 sl->xhead = sl->xbuff;
281
282 if (sl->rcount) {
283 if (sl->rcount <= len) {
284 memcpy(sl->rbuff, rbuff, sl->rcount);
285 } else {
286 sl->rcount = 0;
287 sl->rx_over_errors++;
288 set_bit(SLF_ERROR, &sl->flags);
289 }
290 }
291 sl->mtu = mtu;
292 dev->mtu = mtu;
293 sl->buffsize = len;
294 err = 0;
295
296done_on_bh:
297 spin_unlock_bh(&sl->lock);
298
299done:
300 if (xbuff)
301 kfree(xbuff);
302 if (rbuff)
303 kfree(rbuff);
304#ifdef SL_INCLUDE_CSLIP
305 if (cbuff)
306 kfree(cbuff);
307#endif
308 return err;
309}
310
311
312/* Set the "sending" flag. This must be atomic hence the set_bit. */
313static inline void
314sl_lock(struct slip *sl)
315{
316 netif_stop_queue(sl->dev);
317}
318
319
320/* Clear the "sending" flag. This must be atomic, hence the ASM. */
321static inline void
322sl_unlock(struct slip *sl)
323{
324 netif_wake_queue(sl->dev);
325}
326
327/* Send one completely decapsulated IP datagram to the IP layer. */
328static void
329sl_bump(struct slip *sl)
330{
331 struct sk_buff *skb;
332 int count;
333
334 count = sl->rcount;
335#ifdef SL_INCLUDE_CSLIP
336 if (sl->mode & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
337 unsigned char c;
338 if ((c = sl->rbuff[0]) & SL_TYPE_COMPRESSED_TCP) {
339 /* ignore compressed packets when CSLIP is off */
340 if (!(sl->mode & SL_MODE_CSLIP)) {
341 printk(KERN_WARNING "%s: compressed packet ignored\n", sl->dev->name);
342 return;
343 }
344 /* make sure we've reserved enough space for uncompress to use */
345 if (count + 80 > sl->buffsize) {
346 sl->rx_over_errors++;
347 return;
348 }
349 count = slhc_uncompress(sl->slcomp, sl->rbuff, count);
350 if (count <= 0) {
351 return;
352 }
353 } else if (c >= SL_TYPE_UNCOMPRESSED_TCP) {
354 if (!(sl->mode & SL_MODE_CSLIP)) {
355 /* turn on header compression */
356 sl->mode |= SL_MODE_CSLIP;
357 sl->mode &= ~SL_MODE_ADAPTIVE;
358 printk(KERN_INFO "%s: header compression turned on\n", sl->dev->name);
359 }
360 sl->rbuff[0] &= 0x4f;
361 if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0) {
362 return;
363 }
364 }
365 }
366#endif /* SL_INCLUDE_CSLIP */
367
368 sl->rx_bytes+=count;
369
370 skb = dev_alloc_skb(count);
371 if (skb == NULL) {
372 printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", sl->dev->name);
373 sl->rx_dropped++;
374 return;
375 }
376 skb->dev = sl->dev;
377 memcpy(skb_put(skb,count), sl->rbuff, count);
378 skb->mac.raw=skb->data;
379 skb->protocol=htons(ETH_P_IP);
380 netif_rx(skb);
381 sl->dev->last_rx = jiffies;
382 sl->rx_packets++;
383}
384
385/* Encapsulate one IP datagram and stuff into a TTY queue. */
386static void
387sl_encaps(struct slip *sl, unsigned char *icp, int len)
388{
389 unsigned char *p;
390 int actual, count;
391
392 if (len > sl->mtu) { /* Sigh, shouldn't occur BUT ... */
393 printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name);
394 sl->tx_dropped++;
395 sl_unlock(sl);
396 return;
397 }
398
399 p = icp;
400#ifdef SL_INCLUDE_CSLIP
401 if (sl->mode & SL_MODE_CSLIP) {
402 len = slhc_compress(sl->slcomp, p, len, sl->cbuff, &p, 1);
403 }
404#endif
405#ifdef CONFIG_SLIP_MODE_SLIP6
406 if(sl->mode & SL_MODE_SLIP6)
407 count = slip_esc6(p, (unsigned char *) sl->xbuff, len);
408 else
409#endif
410 count = slip_esc(p, (unsigned char *) sl->xbuff, len);
411
412 /* Order of next two lines is *very* important.
413 * When we are sending a little amount of data,
414 * the transfer may be completed inside driver.write()
415 * routine, because it's running with interrupts enabled.
416 * In this case we *never* got WRITE_WAKEUP event,
417 * if we did not request it before write operation.
418 * 14 Oct 1994 Dmitry Gorodchanin.
419 */
420 sl->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
421 actual = sl->tty->driver->write(sl->tty, sl->xbuff, count);
422#ifdef SL_CHECK_TRANSMIT
423 sl->dev->trans_start = jiffies;
424#endif
425 sl->xleft = count - actual;
426 sl->xhead = sl->xbuff + actual;
427#ifdef CONFIG_SLIP_SMART
428 /* VSV */
429 clear_bit(SLF_OUTWAIT, &sl->flags); /* reset outfill flag */
430#endif
431}
432
433/*
434 * Called by the driver when there's room for more data. If we have
435 * more packets to send, we send them here.
436 */
437static void slip_write_wakeup(struct tty_struct *tty)
438{
439 int actual;
440 struct slip *sl = (struct slip *) tty->disc_data;
441
442 /* First make sure we're connected. */
443 if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) {
444 return;
445 }
446 if (sl->xleft <= 0) {
447 /* Now serial buffer is almost free & we can start
448 * transmission of another packet */
449 sl->tx_packets++;
450 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
451 sl_unlock(sl);
452 return;
453 }
454
455 actual = tty->driver->write(tty, sl->xhead, sl->xleft);
456 sl->xleft -= actual;
457 sl->xhead += actual;
458}
459
460static void sl_tx_timeout(struct net_device *dev)
461{
462 struct slip *sl = netdev_priv(dev);
463
464 spin_lock(&sl->lock);
465
466 if (netif_queue_stopped(dev)) {
467 if (!netif_running(dev))
468 goto out;
469
470 /* May be we must check transmitter timeout here ?
471 * 14 Oct 1994 Dmitry Gorodchanin.
472 */
473#ifdef SL_CHECK_TRANSMIT
474 if (time_before(jiffies, dev->trans_start + 20 * HZ)) {
475 /* 20 sec timeout not reached */
476 goto out;
477 }
478 printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
479 (sl->tty->driver->chars_in_buffer(sl->tty) || sl->xleft) ?
480 "bad line quality" : "driver error");
481 sl->xleft = 0;
482 sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
483 sl_unlock(sl);
484#endif
485 }
486
487out:
488 spin_unlock(&sl->lock);
489}
490
491
492/* Encapsulate an IP datagram and kick it into a TTY queue. */
493static int
494sl_xmit(struct sk_buff *skb, struct net_device *dev)
495{
496 struct slip *sl = netdev_priv(dev);
497
498 spin_lock(&sl->lock);
499 if (!netif_running(dev)) {
500 spin_unlock(&sl->lock);
501 printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
502 dev_kfree_skb(skb);
503 return 0;
504 }
505 if (sl->tty == NULL) {
506 spin_unlock(&sl->lock);
507 dev_kfree_skb(skb);
508 return 0;
509 }
510
511 sl_lock(sl);
512 sl->tx_bytes+=skb->len;
513 sl_encaps(sl, skb->data, skb->len);
514 spin_unlock(&sl->lock);
515
516 dev_kfree_skb(skb);
517 return 0;
518}
519
520
521/******************************************
522 * Routines looking at netdevice side.
523 ******************************************/
524
525/* Netdevice UP -> DOWN routine */
526
527static int
528sl_close(struct net_device *dev)
529{
530 struct slip *sl = netdev_priv(dev);
531
532 spin_lock_bh(&sl->lock);
533 if (sl->tty) {
534 /* TTY discipline is running. */
535 sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
536 }
537 netif_stop_queue(dev);
538 sl->rcount = 0;
539 sl->xleft = 0;
540 spin_unlock_bh(&sl->lock);
541
542 return 0;
543}
544
545/* Netdevice DOWN -> UP routine */
546
547static int sl_open(struct net_device *dev)
548{
549 struct slip *sl = netdev_priv(dev);
550
551 if (sl->tty==NULL)
552 return -ENODEV;
553
554 sl->flags &= (1 << SLF_INUSE);
555 netif_start_queue(dev);
556 return 0;
557}
558
559/* Netdevice change MTU request */
560
561static int sl_change_mtu(struct net_device *dev, int new_mtu)
562{
563 struct slip *sl = netdev_priv(dev);
564
565 if (new_mtu < 68 || new_mtu > 65534)
566 return -EINVAL;
567
568 if (new_mtu != dev->mtu)
569 return sl_realloc_bufs(sl, new_mtu);
570 return 0;
571}
572
573/* Netdevice get statistics request */
574
575static struct net_device_stats *
576sl_get_stats(struct net_device *dev)
577{
578 static struct net_device_stats stats;
579 struct slip *sl = netdev_priv(dev);
580#ifdef SL_INCLUDE_CSLIP
581 struct slcompress *comp;
582#endif
583
584 memset(&stats, 0, sizeof(struct net_device_stats));
585
586 stats.rx_packets = sl->rx_packets;
587 stats.tx_packets = sl->tx_packets;
588 stats.rx_bytes = sl->rx_bytes;
589 stats.tx_bytes = sl->tx_bytes;
590 stats.rx_dropped = sl->rx_dropped;
591 stats.tx_dropped = sl->tx_dropped;
592 stats.tx_errors = sl->tx_errors;
593 stats.rx_errors = sl->rx_errors;
594 stats.rx_over_errors = sl->rx_over_errors;
595#ifdef SL_INCLUDE_CSLIP
596 stats.rx_fifo_errors = sl->rx_compressed;
597 stats.tx_fifo_errors = sl->tx_compressed;
598 stats.collisions = sl->tx_misses;
599 comp = sl->slcomp;
600 if (comp) {
601 stats.rx_fifo_errors += comp->sls_i_compressed;
602 stats.rx_dropped += comp->sls_i_tossed;
603 stats.tx_fifo_errors += comp->sls_o_compressed;
604 stats.collisions += comp->sls_o_misses;
605 }
606#endif /* CONFIG_INET */
607 return (&stats);
608}
609
610/* Netdevice register callback */
611
612static int sl_init(struct net_device *dev)
613{
614 struct slip *sl = netdev_priv(dev);
615
616 /*
617 * Finish setting up the DEVICE info.
618 */
619
620 dev->mtu = sl->mtu;
621 dev->type = ARPHRD_SLIP + sl->mode;
622#ifdef SL_CHECK_TRANSMIT
623 dev->tx_timeout = sl_tx_timeout;
624 dev->watchdog_timeo = 20*HZ;
625#endif
626 return 0;
627}
628
629
630static void sl_uninit(struct net_device *dev)
631{
632 struct slip *sl = netdev_priv(dev);
633
634 sl_free_bufs(sl);
635}
636
637static void sl_setup(struct net_device *dev)
638{
639 dev->init = sl_init;
640 dev->uninit = sl_uninit;
641 dev->open = sl_open;
642 dev->destructor = free_netdev;
643 dev->stop = sl_close;
644 dev->get_stats = sl_get_stats;
645 dev->change_mtu = sl_change_mtu;
646 dev->hard_start_xmit = sl_xmit;
647#ifdef CONFIG_SLIP_SMART
648 dev->do_ioctl = sl_ioctl;
649#endif
650 dev->hard_header_len = 0;
651 dev->addr_len = 0;
652 dev->tx_queue_len = 10;
653
654 SET_MODULE_OWNER(dev);
655
656 /* New-style flags. */
657 dev->flags = IFF_NOARP|IFF_POINTOPOINT|IFF_MULTICAST;
658}
659
660/******************************************
661 Routines looking at TTY side.
662 ******************************************/
663
664
665static int slip_receive_room(struct tty_struct *tty)
666{
667 return 65536; /* We can handle an infinite amount of data. :-) */
668}
669
670/*
671 * Handle the 'receiver data ready' interrupt.
672 * This function is called by the 'tty_io' module in the kernel when
673 * a block of SLIP data has been received, which can now be decapsulated
674 * and sent on to some IP layer for further processing. This will not
675 * be re-entered while running but other ldisc functions may be called
676 * in parallel
677 */
678
679static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
680{
681 struct slip *sl = (struct slip *) tty->disc_data;
682
683 if (!sl || sl->magic != SLIP_MAGIC ||
684 !netif_running(sl->dev))
685 return;
686
687 /* Read the characters out of the buffer */
688 while (count--) {
689 if (fp && *fp++) {
690 if (!test_and_set_bit(SLF_ERROR, &sl->flags)) {
691 sl->rx_errors++;
692 }
693 cp++;
694 continue;
695 }
696#ifdef CONFIG_SLIP_MODE_SLIP6
697 if (sl->mode & SL_MODE_SLIP6)
698 slip_unesc6(sl, *cp++);
699 else
700#endif
701 slip_unesc(sl, *cp++);
702 }
703}
704
705/************************************
706 * slip_open helper routines.
707 ************************************/
708
709/* Collect hanged up channels */
710
711static void sl_sync(void)
712{
713 int i;
714 struct net_device *dev;
715 struct slip *sl;
716
717 for (i = 0; i < slip_maxdev; i++) {
718 if ((dev = slip_devs[i]) == NULL)
719 break;
720
721 sl = netdev_priv(dev);
722 if (sl->tty || sl->leased)
723 continue;
724 if (dev->flags&IFF_UP)
725 dev_close(dev);
726 }
727}
728
729
730/* Find a free SLIP channel, and link in this `tty' line. */
731static struct slip *
732sl_alloc(dev_t line)
733{
734 int i;
735 int sel = -1;
736 int score = -1;
737 struct net_device *dev = NULL;
738 struct slip *sl;
739
740 if (slip_devs == NULL)
741 return NULL; /* Master array missing ! */
742
743 for (i = 0; i < slip_maxdev; i++) {
744 dev = slip_devs[i];
745 if (dev == NULL)
746 break;
747
748 sl = netdev_priv(dev);
749 if (sl->leased) {
750 if (sl->line != line)
751 continue;
752 if (sl->tty)
753 return NULL;
754
755 /* Clear ESCAPE & ERROR flags */
756 sl->flags &= (1 << SLF_INUSE);
757 return sl;
758 }
759
760 if (sl->tty)
761 continue;
762
763 if (current->pid == sl->pid) {
764 if (sl->line == line && score < 3) {
765 sel = i;
766 score = 3;
767 continue;
768 }
769 if (score < 2) {
770 sel = i;
771 score = 2;
772 }
773 continue;
774 }
775 if (sl->line == line && score < 1) {
776 sel = i;
777 score = 1;
778 continue;
779 }
780 if (score < 0) {
781 sel = i;
782 score = 0;
783 }
784 }
785
786 if (sel >= 0) {
787 i = sel;
788 dev = slip_devs[i];
789 if (score > 1) {
790 sl = netdev_priv(dev);
791 sl->flags &= (1 << SLF_INUSE);
792 return sl;
793 }
794 }
795
796 /* Sorry, too many, all slots in use */
797 if (i >= slip_maxdev)
798 return NULL;
799
800 if (dev) {
801 sl = netdev_priv(dev);
802 if (test_bit(SLF_INUSE, &sl->flags)) {
803 unregister_netdevice(dev);
804 dev = NULL;
805 slip_devs[i] = NULL;
806 }
807 }
808
809 if (!dev) {
810 char name[IFNAMSIZ];
811 sprintf(name, "sl%d", i);
812
813 dev = alloc_netdev(sizeof(*sl), name, sl_setup);
814 if (!dev)
815 return NULL;
816 dev->base_addr = i;
817 }
818
819 sl = netdev_priv(dev);
820
821 /* Initialize channel control data */
822 sl->magic = SLIP_MAGIC;
823 sl->dev = dev;
824 spin_lock_init(&sl->lock);
825 sl->mode = SL_MODE_DEFAULT;
826#ifdef CONFIG_SLIP_SMART
827 init_timer(&sl->keepalive_timer); /* initialize timer_list struct */
828 sl->keepalive_timer.data=(unsigned long)sl;
829 sl->keepalive_timer.function=sl_keepalive;
830 init_timer(&sl->outfill_timer);
831 sl->outfill_timer.data=(unsigned long)sl;
832 sl->outfill_timer.function=sl_outfill;
833#endif
834 slip_devs[i] = dev;
835
836 return sl;
837}
838
839/*
840 * Open the high-level part of the SLIP channel.
841 * This function is called by the TTY module when the
842 * SLIP line discipline is called for. Because we are
843 * sure the tty line exists, we only have to link it to
844 * a free SLIP channel...
845 *
846 * Called in process context serialized from other ldisc calls.
847 */
848
849static int slip_open(struct tty_struct *tty)
850{
851 struct slip *sl;
852 int err;
853
854 if(!capable(CAP_NET_ADMIN))
855 return -EPERM;
856
857 /* RTnetlink lock is misused here to serialize concurrent
858 opens of slip channels. There are better ways, but it is
859 the simplest one.
860 */
861 rtnl_lock();
862
863 /* Collect hanged up channels. */
864 sl_sync();
865
866 sl = (struct slip *) tty->disc_data;
867
868 err = -EEXIST;
869 /* First make sure we're not already connected. */
870 if (sl && sl->magic == SLIP_MAGIC)
871 goto err_exit;
872
873 /* OK. Find a free SLIP channel to use. */
874 err = -ENFILE;
875 if ((sl = sl_alloc(tty_devnum(tty))) == NULL)
876 goto err_exit;
877
878 sl->tty = tty;
879 tty->disc_data = sl;
880 sl->line = tty_devnum(tty);
881 sl->pid = current->pid;
882
883 /* FIXME: already done before we were called - seems this can go */
884 if (tty->driver->flush_buffer)
885 tty->driver->flush_buffer(tty);
886
887 if (!test_bit(SLF_INUSE, &sl->flags)) {
888 /* Perform the low-level SLIP initialization. */
889 if ((err = sl_alloc_bufs(sl, SL_MTU)) != 0)
890 goto err_free_chan;
891
892 set_bit(SLF_INUSE, &sl->flags);
893
894 if ((err = register_netdevice(sl->dev)))
895 goto err_free_bufs;
896 }
897
898#ifdef CONFIG_SLIP_SMART
899 if (sl->keepalive) {
900 sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
901 add_timer (&sl->keepalive_timer);
902 }
903 if (sl->outfill) {
904 sl->outfill_timer.expires=jiffies+sl->outfill*HZ;
905 add_timer (&sl->outfill_timer);
906 }
907#endif
908
909 /* Done. We have linked the TTY line to a channel. */
910 rtnl_unlock();
911 return sl->dev->base_addr;
912
913err_free_bufs:
914 sl_free_bufs(sl);
915
916err_free_chan:
917 sl->tty = NULL;
918 tty->disc_data = NULL;
919 clear_bit(SLF_INUSE, &sl->flags);
920
921err_exit:
922 rtnl_unlock();
923
924 /* Count references from TTY module */
925 return err;
926}
927
928/*
929
930 FIXME: 1,2 are fixed 3 was never true anyway.
931
932 Let me to blame a bit.
933 1. TTY module calls this funstion on soft interrupt.
934 2. TTY module calls this function WITH MASKED INTERRUPTS!
935 3. TTY module does not notify us about line discipline
936 shutdown,
937
938 Seems, now it is clean. The solution is to consider netdevice and
939 line discipline sides as two independent threads.
940
941 By-product (not desired): sl? does not feel hangups and remains open.
942 It is supposed, that user level program (dip, diald, slattach...)
943 will catch SIGHUP and make the rest of work.
944
945 I see no way to make more with current tty code. --ANK
946 */
947
948/*
949 * Close down a SLIP channel.
950 * This means flushing out any pending queues, and then returning. This
951 * call is serialized against other ldisc functions.
952 */
953static void
954slip_close(struct tty_struct *tty)
955{
956 struct slip *sl = (struct slip *) tty->disc_data;
957
958 /* First make sure we're connected. */
959 if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
960 return;
961
962 tty->disc_data = NULL;
963 sl->tty = NULL;
964 if (!sl->leased)
965 sl->line = 0;
966
967 /* VSV = very important to remove timers */
968#ifdef CONFIG_SLIP_SMART
969 del_timer_sync(&sl->keepalive_timer);
970 del_timer_sync(&sl->outfill_timer);
971#endif
972
973 /* Count references from TTY module */
974}
975
976 /************************************************************************
977 * STANDARD SLIP ENCAPSULATION *
978 ************************************************************************/
979
980int
981slip_esc(unsigned char *s, unsigned char *d, int len)
982{
983 unsigned char *ptr = d;
984 unsigned char c;
985
986 /*
987 * Send an initial END character to flush out any
988 * data that may have accumulated in the receiver
989 * due to line noise.
990 */
991
992 *ptr++ = END;
993
994 /*
995 * For each byte in the packet, send the appropriate
996 * character sequence, according to the SLIP protocol.
997 */
998
999 while (len-- > 0) {
1000 switch(c = *s++) {
1001 case END:
1002 *ptr++ = ESC;
1003 *ptr++ = ESC_END;
1004 break;
1005 case ESC:
1006 *ptr++ = ESC;
1007 *ptr++ = ESC_ESC;
1008 break;
1009 default:
1010 *ptr++ = c;
1011 break;
1012 }
1013 }
1014 *ptr++ = END;
1015 return (ptr - d);
1016}
1017
1018static void slip_unesc(struct slip *sl, unsigned char s)
1019{
1020
1021 switch(s) {
1022 case END:
1023#ifdef CONFIG_SLIP_SMART
1024 /* drop keeptest bit = VSV */
1025 if (test_bit(SLF_KEEPTEST, &sl->flags))
1026 clear_bit(SLF_KEEPTEST, &sl->flags);
1027#endif
1028
1029 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2)) {
1030 sl_bump(sl);
1031 }
1032 clear_bit(SLF_ESCAPE, &sl->flags);
1033 sl->rcount = 0;
1034 return;
1035
1036 case ESC:
1037 set_bit(SLF_ESCAPE, &sl->flags);
1038 return;
1039 case ESC_ESC:
1040 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags)) {
1041 s = ESC;
1042 }
1043 break;
1044 case ESC_END:
1045 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags)) {
1046 s = END;
1047 }
1048 break;
1049 }
1050 if (!test_bit(SLF_ERROR, &sl->flags)) {
1051 if (sl->rcount < sl->buffsize) {
1052 sl->rbuff[sl->rcount++] = s;
1053 return;
1054 }
1055 sl->rx_over_errors++;
1056 set_bit(SLF_ERROR, &sl->flags);
1057 }
1058}
1059
1060
1061#ifdef CONFIG_SLIP_MODE_SLIP6
1062/************************************************************************
1063 * 6 BIT SLIP ENCAPSULATION *
1064 ************************************************************************/
1065
1066int
1067slip_esc6(unsigned char *s, unsigned char *d, int len)
1068{
1069 unsigned char *ptr = d;
1070 unsigned char c;
1071 int i;
1072 unsigned short v = 0;
1073 short bits = 0;
1074
1075 /*
1076 * Send an initial END character to flush out any
1077 * data that may have accumulated in the receiver
1078 * due to line noise.
1079 */
1080
1081 *ptr++ = 0x70;
1082
1083 /*
1084 * Encode the packet into printable ascii characters
1085 */
1086
1087 for (i = 0; i < len; ++i) {
1088 v = (v << 8) | s[i];
1089 bits += 8;
1090 while (bits >= 6) {
1091 bits -= 6;
1092 c = 0x30 + ((v >> bits) & 0x3F);
1093 *ptr++ = c;
1094 }
1095 }
1096 if (bits) {
1097 c = 0x30 + ((v << (6 - bits)) & 0x3F);
1098 *ptr++ = c;
1099 }
1100 *ptr++ = 0x70;
1101 return ptr - d;
1102}
1103
1104void
1105slip_unesc6(struct slip *sl, unsigned char s)
1106{
1107 unsigned char c;
1108
1109 if (s == 0x70) {
1110#ifdef CONFIG_SLIP_SMART
1111 /* drop keeptest bit = VSV */
1112 if (test_bit(SLF_KEEPTEST, &sl->flags))
1113 clear_bit(SLF_KEEPTEST, &sl->flags);
1114#endif
1115
1116 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2)) {
1117 sl_bump(sl);
1118 }
1119 sl->rcount = 0;
1120 sl->xbits = 0;
1121 sl->xdata = 0;
1122 } else if (s >= 0x30 && s < 0x70) {
1123 sl->xdata = (sl->xdata << 6) | ((s - 0x30) & 0x3F);
1124 sl->xbits += 6;
1125 if (sl->xbits >= 8) {
1126 sl->xbits -= 8;
1127 c = (unsigned char)(sl->xdata >> sl->xbits);
1128 if (!test_bit(SLF_ERROR, &sl->flags)) {
1129 if (sl->rcount < sl->buffsize) {
1130 sl->rbuff[sl->rcount++] = c;
1131 return;
1132 }
1133 sl->rx_over_errors++;
1134 set_bit(SLF_ERROR, &sl->flags);
1135 }
1136 }
1137 }
1138}
1139#endif /* CONFIG_SLIP_MODE_SLIP6 */
1140
1141/* Perform I/O control on an active SLIP channel. */
1142static int slip_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1143{
1144 struct slip *sl = (struct slip *) tty->disc_data;
1145 unsigned int tmp;
1146 int __user *p = (int __user *)arg;
1147
1148 /* First make sure we're connected. */
1149 if (!sl || sl->magic != SLIP_MAGIC) {
1150 return -EINVAL;
1151 }
1152
1153 switch(cmd) {
1154 case SIOCGIFNAME:
1155 tmp = strlen(sl->dev->name) + 1;
1156 if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
1157 return -EFAULT;
1158 return 0;
1159
1160 case SIOCGIFENCAP:
1161 if (put_user(sl->mode, p))
1162 return -EFAULT;
1163 return 0;
1164
1165 case SIOCSIFENCAP:
1166 if (get_user(tmp, p))
1167 return -EFAULT;
1168#ifndef SL_INCLUDE_CSLIP
1169 if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE)) {
1170 return -EINVAL;
1171 }
1172#else
1173 if ((tmp & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) ==
1174 (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
1175 /* return -EINVAL; */
1176 tmp &= ~SL_MODE_ADAPTIVE;
1177 }
1178#endif
1179#ifndef CONFIG_SLIP_MODE_SLIP6
1180 if (tmp & SL_MODE_SLIP6) {
1181 return -EINVAL;
1182 }
1183#endif
1184 sl->mode = tmp;
1185 sl->dev->type = ARPHRD_SLIP+sl->mode;
1186 return 0;
1187
1188 case SIOCSIFHWADDR:
1189 return -EINVAL;
1190
1191#ifdef CONFIG_SLIP_SMART
1192 /* VSV changes start here */
1193 case SIOCSKEEPALIVE:
1194 if (get_user(tmp, p))
1195 return -EFAULT;
1196 if (tmp > 255) /* max for unchar */
1197 return -EINVAL;
1198
1199 spin_lock_bh(&sl->lock);
1200 if (!sl->tty) {
1201 spin_unlock_bh(&sl->lock);
1202 return -ENODEV;
1203 }
1204 if ((sl->keepalive = (unchar) tmp) != 0) {
1205 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1206 set_bit(SLF_KEEPTEST, &sl->flags);
1207 } else {
1208 del_timer (&sl->keepalive_timer);
1209 }
1210 spin_unlock_bh(&sl->lock);
1211 return 0;
1212
1213 case SIOCGKEEPALIVE:
1214 if (put_user(sl->keepalive, p))
1215 return -EFAULT;
1216 return 0;
1217
1218 case SIOCSOUTFILL:
1219 if (get_user(tmp, p))
1220 return -EFAULT;
1221 if (tmp > 255) /* max for unchar */
1222 return -EINVAL;
1223 spin_lock_bh(&sl->lock);
1224 if (!sl->tty) {
1225 spin_unlock_bh(&sl->lock);
1226 return -ENODEV;
1227 }
1228 if ((sl->outfill = (unchar) tmp) != 0){
1229 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1230 set_bit(SLF_OUTWAIT, &sl->flags);
1231 } else {
1232 del_timer (&sl->outfill_timer);
1233 }
1234 spin_unlock_bh(&sl->lock);
1235 return 0;
1236
1237 case SIOCGOUTFILL:
1238 if (put_user(sl->outfill, p))
1239 return -EFAULT;
1240 return 0;
1241 /* VSV changes end */
1242#endif
1243
1244 /* Allow stty to read, but not set, the serial port */
1245 case TCGETS:
1246 case TCGETA:
1247 return n_tty_ioctl(tty, file, cmd, arg);
1248
1249 default:
1250 return -ENOIOCTLCMD;
1251 }
1252}
1253
1254/* VSV changes start here */
1255#ifdef CONFIG_SLIP_SMART
1256/* function do_ioctl called from net/core/dev.c
1257 to allow get/set outfill/keepalive parameter
1258 by ifconfig */
1259
1260static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd)
1261{
1262 struct slip *sl = netdev_priv(dev);
1263 unsigned long *p = (unsigned long *)&rq->ifr_ifru;
1264
1265 if (sl == NULL) /* Allocation failed ?? */
1266 return -ENODEV;
1267
1268 spin_lock_bh(&sl->lock);
1269
1270 if (!sl->tty) {
1271 spin_unlock_bh(&sl->lock);
1272 return -ENODEV;
1273 }
1274
1275 switch(cmd){
1276 case SIOCSKEEPALIVE:
1277 /* max for unchar */
1278 if ((unsigned)*p > 255) {
1279 spin_unlock_bh(&sl->lock);
1280 return -EINVAL;
1281 }
1282 sl->keepalive = (unchar) *p;
1283 if (sl->keepalive != 0) {
1284 sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
1285 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1286 set_bit(SLF_KEEPTEST, &sl->flags);
1287 } else {
1288 del_timer(&sl->keepalive_timer);
1289 }
1290 break;
1291
1292 case SIOCGKEEPALIVE:
1293 *p = sl->keepalive;
1294 break;
1295
1296 case SIOCSOUTFILL:
1297 if ((unsigned)*p > 255) { /* max for unchar */
1298 spin_unlock_bh(&sl->lock);
1299 return -EINVAL;
1300 }
1301 if ((sl->outfill = (unchar)*p) != 0){
1302 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1303 set_bit(SLF_OUTWAIT, &sl->flags);
1304 } else {
1305 del_timer (&sl->outfill_timer);
1306 }
1307 break;
1308
1309 case SIOCGOUTFILL:
1310 *p = sl->outfill;
1311 break;
1312
1313 case SIOCSLEASE:
1314 /* Resolve race condition, when ioctl'ing hanged up
1315 and opened by another process device.
1316 */
1317 if (sl->tty != current->signal->tty && sl->pid != current->pid) {
1318 spin_unlock_bh(&sl->lock);
1319 return -EPERM;
1320 }
1321 sl->leased = 0;
1322 if (*p)
1323 sl->leased = 1;
1324 break;
1325
1326 case SIOCGLEASE:
1327 *p = sl->leased;
1328 };
1329 spin_unlock_bh(&sl->lock);
1330 return 0;
1331}
1332#endif
1333/* VSV changes end */
1334
1335static struct tty_ldisc sl_ldisc = {
1336 .owner = THIS_MODULE,
1337 .magic = TTY_LDISC_MAGIC,
1338 .name = "slip",
1339 .open = slip_open,
1340 .close = slip_close,
1341 .ioctl = slip_ioctl,
1342 .receive_buf = slip_receive_buf,
1343 .receive_room = slip_receive_room,
1344 .write_wakeup = slip_write_wakeup,
1345};
1346
1347static int __init slip_init(void)
1348{
1349 int status;
1350
1351 if (slip_maxdev < 4)
1352 slip_maxdev = 4; /* Sanity */
1353
1354 printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)"
1355#ifdef CONFIG_SLIP_MODE_SLIP6
1356 " (6 bit encapsulation enabled)"
1357#endif
1358 ".\n",
1359 SLIP_VERSION, slip_maxdev );
1360#if defined(SL_INCLUDE_CSLIP)
1361 printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
1362#endif
1363#ifdef CONFIG_SLIP_SMART
1364 printk(KERN_INFO "SLIP linefill/keepalive option.\n");
1365#endif
1366
1367 slip_devs = kmalloc(sizeof(struct net_device *)*slip_maxdev, GFP_KERNEL);
1368 if (!slip_devs) {
1369 printk(KERN_ERR "SLIP: Can't allocate slip devices array! Uaargh! (-> No SLIP available)\n");
1370 return -ENOMEM;
1371 }
1372
1373 /* Clear the pointer array, we allocate devices when we need them */
1374 memset(slip_devs, 0, sizeof(struct net_device *)*slip_maxdev);
1375
1376 /* Fill in our line protocol discipline, and register it */
1377 if ((status = tty_register_ldisc(N_SLIP, &sl_ldisc)) != 0) {
1378 printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
1379 kfree(slip_devs);
1380 }
1381 return status;
1382}
1383
1384static void __exit slip_exit(void)
1385{
1386 int i;
1387 struct net_device *dev;
1388 struct slip *sl;
1389 unsigned long timeout = jiffies + HZ;
1390 int busy = 0;
1391
1392 if (slip_devs == NULL)
1393 return;
1394
1395 /* First of all: check for active disciplines and hangup them.
1396 */
1397 do {
1398 if (busy) {
1399 set_current_state(TASK_INTERRUPTIBLE);
1400 schedule_timeout(HZ / 10);
1401 }
1402
1403 busy = 0;
1404 for (i = 0; i < slip_maxdev; i++) {
1405 dev = slip_devs[i];
1406 if (!dev)
1407 continue;
1408 sl = netdev_priv(dev);
1409 spin_lock_bh(&sl->lock);
1410 if (sl->tty) {
1411 busy++;
1412 tty_hangup(sl->tty);
1413 }
1414 spin_unlock_bh(&sl->lock);
1415 }
1416 } while (busy && time_before(jiffies, timeout));
1417
1418
1419 for (i = 0; i < slip_maxdev; i++) {
1420 dev = slip_devs[i];
1421 if (!dev)
1422 continue;
1423 slip_devs[i] = NULL;
1424
1425 sl = netdev_priv(dev);
1426 if (sl->tty) {
1427 printk(KERN_ERR "%s: tty discipline still running\n",
1428 dev->name);
1429 /* Intentionally leak the control block. */
1430 dev->destructor = NULL;
1431 }
1432
1433 unregister_netdev(dev);
1434 }
1435
1436 kfree(slip_devs);
1437 slip_devs = NULL;
1438
1439 if ((i = tty_register_ldisc(N_SLIP, NULL)))
1440 {
1441 printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i);
1442 }
1443}
1444
1445module_init(slip_init);
1446module_exit(slip_exit);
1447
1448#ifdef CONFIG_SLIP_SMART
1449/*
1450 * This is start of the code for multislip style line checking
1451 * added by Stanislav Voronyi. All changes before marked VSV
1452 */
1453
1454static void sl_outfill(unsigned long sls)
1455{
1456 struct slip *sl=(struct slip *)sls;
1457
1458 spin_lock(&sl->lock);
1459
1460 if (sl->tty == NULL)
1461 goto out;
1462
1463 if(sl->outfill)
1464 {
1465 if( test_bit(SLF_OUTWAIT, &sl->flags) )
1466 {
1467 /* no packets were transmitted, do outfill */
1468#ifdef CONFIG_SLIP_MODE_SLIP6
1469 unsigned char s = (sl->mode & SL_MODE_SLIP6)?0x70:END;
1470#else
1471 unsigned char s = END;
1472#endif
1473 /* put END into tty queue. Is it right ??? */
1474 if (!netif_queue_stopped(sl->dev))
1475 {
1476 /* if device busy no outfill */
1477 sl->tty->driver->write(sl->tty, &s, 1);
1478 }
1479 }
1480 else
1481 set_bit(SLF_OUTWAIT, &sl->flags);
1482
1483 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1484 }
1485out:
1486 spin_unlock(&sl->lock);
1487}
1488
1489static void sl_keepalive(unsigned long sls)
1490{
1491 struct slip *sl=(struct slip *)sls;
1492
1493 spin_lock(&sl->lock);
1494
1495 if (sl->tty == NULL)
1496 goto out;
1497
1498 if( sl->keepalive)
1499 {
1500 if(test_bit(SLF_KEEPTEST, &sl->flags))
1501 {
1502 /* keepalive still high :(, we must hangup */
1503 if( sl->outfill ) /* outfill timer must be deleted too */
1504 (void)del_timer(&sl->outfill_timer);
1505 printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
1506 tty_hangup(sl->tty); /* this must hangup tty & close slip */
1507 /* I think we need not something else */
1508 goto out;
1509 }
1510 else
1511 set_bit(SLF_KEEPTEST, &sl->flags);
1512
1513 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1514 }
1515
1516out:
1517 spin_unlock(&sl->lock);
1518}
1519
1520#endif
1521MODULE_LICENSE("GPL");
1522MODULE_ALIAS_LDISC(N_SLIP);