blob: eb4cb480b93e9be344f9f84bbd574c68fe3ec8e6 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/amba.c
3 *
4 * Driver for AMBA serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright 1999 ARM Limited
9 * Copyright (C) 2000 Deep Blue Solutions Ltd.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 * This is a generic driver for ARM AMBA-type serial ports. They
26 * have a lot of 16550-like features, but are not register compatible.
27 * Note that although they do have CTS, DCD and DSR inputs, they do
28 * not have an RI input, nor do they have DTR or RTS outputs. If
29 * required, these have to be supplied via some other means (eg, GPIO)
30 * and hooked into this driver.
31 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
34#define SUPPORT_SYSRQ
35#endif
36
37#include <linux/module.h>
38#include <linux/ioport.h>
39#include <linux/init.h>
40#include <linux/console.h>
41#include <linux/sysrq.h>
42#include <linux/device.h>
43#include <linux/tty.h>
44#include <linux/tty_flip.h>
45#include <linux/serial_core.h>
46#include <linux/serial.h>
Russell Kinga62c80e2006-01-07 13:52:45 +000047#include <linux/amba/bus.h>
48#include <linux/amba/serial.h>
Russell Kingf8ce2542006-01-07 16:15:52 +000049#include <linux/clk.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090050#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070051
52#include <asm/io.h>
Russell Kingc6b8fda2005-10-28 14:05:16 +010053#include <asm/sizes.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070054
55#define UART_NR 14
56
57#define SERIAL_AMBA_MAJOR 204
58#define SERIAL_AMBA_MINOR 64
59#define SERIAL_AMBA_NR UART_NR
60
61#define AMBA_ISR_PASS_LIMIT 256
62
Russell Kingb63d4f02005-11-19 11:10:35 +000063#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
64#define UART_DUMMY_DR_RX (1 << 16)
Linus Torvalds1da177e2005-04-16 15:20:36 -070065
66/*
67 * We wrap our port structure around the generic uart_port.
68 */
69struct uart_amba_port {
70 struct uart_port port;
71 struct clk *clk;
72 unsigned int im; /* interrupt mask */
73 unsigned int old_status;
Alessandro Rubini5926a292009-06-04 17:43:04 +010074 unsigned int ifls; /* vendor-specific */
Rabin Vincent3b438162010-02-12 06:43:11 +010075 bool autorts;
Alessandro Rubini5926a292009-06-04 17:43:04 +010076};
77
78/* There is by now at least one vendor with differing details, so handle it */
79struct vendor_data {
80 unsigned int ifls;
81 unsigned int fifosize;
82};
83
84static struct vendor_data vendor_arm = {
85 .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
86 .fifosize = 16,
87};
88
89static struct vendor_data vendor_st = {
90 .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
91 .fifosize = 64,
Linus Torvalds1da177e2005-04-16 15:20:36 -070092};
93
Russell Kingb129a8c2005-08-31 10:12:14 +010094static void pl011_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070095{
96 struct uart_amba_port *uap = (struct uart_amba_port *)port;
97
98 uap->im &= ~UART011_TXIM;
99 writew(uap->im, uap->port.membase + UART011_IMSC);
100}
101
Russell Kingb129a8c2005-08-31 10:12:14 +0100102static void pl011_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103{
104 struct uart_amba_port *uap = (struct uart_amba_port *)port;
105
106 uap->im |= UART011_TXIM;
107 writew(uap->im, uap->port.membase + UART011_IMSC);
108}
109
110static void pl011_stop_rx(struct uart_port *port)
111{
112 struct uart_amba_port *uap = (struct uart_amba_port *)port;
113
114 uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
115 UART011_PEIM|UART011_BEIM|UART011_OEIM);
116 writew(uap->im, uap->port.membase + UART011_IMSC);
117}
118
119static void pl011_enable_ms(struct uart_port *port)
120{
121 struct uart_amba_port *uap = (struct uart_amba_port *)port;
122
123 uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
124 writew(uap->im, uap->port.membase + UART011_IMSC);
125}
126
David Howells7d12e782006-10-05 14:55:46 +0100127static void pl011_rx_chars(struct uart_amba_port *uap)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128{
Alan Coxebd2c8f2009-09-19 13:13:28 -0700129 struct tty_struct *tty = uap->port.state->port.tty;
Russell Kingb63d4f02005-11-19 11:10:35 +0000130 unsigned int status, ch, flag, max_count = 256;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131
132 status = readw(uap->port.membase + UART01x_FR);
133 while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
Russell Kingb63d4f02005-11-19 11:10:35 +0000134 ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 flag = TTY_NORMAL;
136 uap->port.icount.rx++;
137
138 /*
139 * Note that the error handling code is
140 * out of the main execution path
141 */
Russell Kingb63d4f02005-11-19 11:10:35 +0000142 if (unlikely(ch & UART_DR_ERROR)) {
143 if (ch & UART011_DR_BE) {
144 ch &= ~(UART011_DR_FE | UART011_DR_PE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145 uap->port.icount.brk++;
146 if (uart_handle_break(&uap->port))
147 goto ignore_char;
Russell Kingb63d4f02005-11-19 11:10:35 +0000148 } else if (ch & UART011_DR_PE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149 uap->port.icount.parity++;
Russell Kingb63d4f02005-11-19 11:10:35 +0000150 else if (ch & UART011_DR_FE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151 uap->port.icount.frame++;
Russell Kingb63d4f02005-11-19 11:10:35 +0000152 if (ch & UART011_DR_OE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153 uap->port.icount.overrun++;
154
Russell Kingb63d4f02005-11-19 11:10:35 +0000155 ch &= uap->port.read_status_mask;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
Russell Kingb63d4f02005-11-19 11:10:35 +0000157 if (ch & UART011_DR_BE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700158 flag = TTY_BREAK;
Russell Kingb63d4f02005-11-19 11:10:35 +0000159 else if (ch & UART011_DR_PE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700160 flag = TTY_PARITY;
Russell Kingb63d4f02005-11-19 11:10:35 +0000161 else if (ch & UART011_DR_FE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700162 flag = TTY_FRAME;
163 }
164
David Howells7d12e782006-10-05 14:55:46 +0100165 if (uart_handle_sysrq_char(&uap->port, ch & 255))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 goto ignore_char;
167
Russell Kingb63d4f02005-11-19 11:10:35 +0000168 uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
Russell King05ab3012005-05-09 23:21:59 +0100169
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170 ignore_char:
171 status = readw(uap->port.membase + UART01x_FR);
172 }
Thomas Gleixner2389b272007-05-29 21:53:50 +0100173 spin_unlock(&uap->port.lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174 tty_flip_buffer_push(tty);
Thomas Gleixner2389b272007-05-29 21:53:50 +0100175 spin_lock(&uap->port.lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176}
177
178static void pl011_tx_chars(struct uart_amba_port *uap)
179{
Alan Coxebd2c8f2009-09-19 13:13:28 -0700180 struct circ_buf *xmit = &uap->port.state->xmit;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 int count;
182
183 if (uap->port.x_char) {
184 writew(uap->port.x_char, uap->port.membase + UART01x_DR);
185 uap->port.icount.tx++;
186 uap->port.x_char = 0;
187 return;
188 }
189 if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100190 pl011_stop_tx(&uap->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191 return;
192 }
193
194 count = uap->port.fifosize >> 1;
195 do {
196 writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
197 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
198 uap->port.icount.tx++;
199 if (uart_circ_empty(xmit))
200 break;
201 } while (--count > 0);
202
203 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
204 uart_write_wakeup(&uap->port);
205
206 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100207 pl011_stop_tx(&uap->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208}
209
210static void pl011_modem_status(struct uart_amba_port *uap)
211{
212 unsigned int status, delta;
213
214 status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
215
216 delta = status ^ uap->old_status;
217 uap->old_status = status;
218
219 if (!delta)
220 return;
221
222 if (delta & UART01x_FR_DCD)
223 uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
224
225 if (delta & UART01x_FR_DSR)
226 uap->port.icount.dsr++;
227
228 if (delta & UART01x_FR_CTS)
229 uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
230
Alan Coxbdc04e32009-09-19 13:13:31 -0700231 wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232}
233
David Howells7d12e782006-10-05 14:55:46 +0100234static irqreturn_t pl011_int(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235{
236 struct uart_amba_port *uap = dev_id;
237 unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
238 int handled = 0;
239
240 spin_lock(&uap->port.lock);
241
242 status = readw(uap->port.membase + UART011_MIS);
243 if (status) {
244 do {
245 writew(status & ~(UART011_TXIS|UART011_RTIS|
246 UART011_RXIS),
247 uap->port.membase + UART011_ICR);
248
249 if (status & (UART011_RTIS|UART011_RXIS))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250 pl011_rx_chars(uap);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 if (status & (UART011_DSRMIS|UART011_DCDMIS|
252 UART011_CTSMIS|UART011_RIMIS))
253 pl011_modem_status(uap);
254 if (status & UART011_TXIS)
255 pl011_tx_chars(uap);
256
257 if (pass_counter-- == 0)
258 break;
259
260 status = readw(uap->port.membase + UART011_MIS);
261 } while (status != 0);
262 handled = 1;
263 }
264
265 spin_unlock(&uap->port.lock);
266
267 return IRQ_RETVAL(handled);
268}
269
270static unsigned int pl01x_tx_empty(struct uart_port *port)
271{
272 struct uart_amba_port *uap = (struct uart_amba_port *)port;
273 unsigned int status = readw(uap->port.membase + UART01x_FR);
274 return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
275}
276
277static unsigned int pl01x_get_mctrl(struct uart_port *port)
278{
279 struct uart_amba_port *uap = (struct uart_amba_port *)port;
280 unsigned int result = 0;
281 unsigned int status = readw(uap->port.membase + UART01x_FR);
282
Jiri Slaby5159f402007-10-18 23:40:31 -0700283#define TIOCMBIT(uartbit, tiocmbit) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700284 if (status & uartbit) \
285 result |= tiocmbit
286
Jiri Slaby5159f402007-10-18 23:40:31 -0700287 TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
288 TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
289 TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
290 TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
291#undef TIOCMBIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292 return result;
293}
294
295static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
296{
297 struct uart_amba_port *uap = (struct uart_amba_port *)port;
298 unsigned int cr;
299
300 cr = readw(uap->port.membase + UART011_CR);
301
Jiri Slaby5159f402007-10-18 23:40:31 -0700302#define TIOCMBIT(tiocmbit, uartbit) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303 if (mctrl & tiocmbit) \
304 cr |= uartbit; \
305 else \
306 cr &= ~uartbit
307
Jiri Slaby5159f402007-10-18 23:40:31 -0700308 TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
309 TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
310 TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
311 TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
312 TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
Rabin Vincent3b438162010-02-12 06:43:11 +0100313
314 if (uap->autorts) {
315 /* We need to disable auto-RTS if we want to turn RTS off */
316 TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
317 }
Jiri Slaby5159f402007-10-18 23:40:31 -0700318#undef TIOCMBIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319
320 writew(cr, uap->port.membase + UART011_CR);
321}
322
323static void pl011_break_ctl(struct uart_port *port, int break_state)
324{
325 struct uart_amba_port *uap = (struct uart_amba_port *)port;
326 unsigned long flags;
327 unsigned int lcr_h;
328
329 spin_lock_irqsave(&uap->port.lock, flags);
330 lcr_h = readw(uap->port.membase + UART011_LCRH);
331 if (break_state == -1)
332 lcr_h |= UART01x_LCRH_BRK;
333 else
334 lcr_h &= ~UART01x_LCRH_BRK;
335 writew(lcr_h, uap->port.membase + UART011_LCRH);
336 spin_unlock_irqrestore(&uap->port.lock, flags);
337}
338
Jason Wessel84b5ae12008-02-20 13:33:39 -0600339#ifdef CONFIG_CONSOLE_POLL
340static int pl010_get_poll_char(struct uart_port *port)
341{
342 struct uart_amba_port *uap = (struct uart_amba_port *)port;
343 unsigned int status;
344
Jason Wesself5316b42010-05-20 21:04:22 -0500345 status = readw(uap->port.membase + UART01x_FR);
346 if (status & UART01x_FR_RXFE)
347 return NO_POLL_CHAR;
Jason Wessel84b5ae12008-02-20 13:33:39 -0600348
349 return readw(uap->port.membase + UART01x_DR);
350}
351
352static void pl010_put_poll_char(struct uart_port *port,
353 unsigned char ch)
354{
355 struct uart_amba_port *uap = (struct uart_amba_port *)port;
356
357 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
358 barrier();
359
360 writew(ch, uap->port.membase + UART01x_DR);
361}
362
363#endif /* CONFIG_CONSOLE_POLL */
364
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365static int pl011_startup(struct uart_port *port)
366{
367 struct uart_amba_port *uap = (struct uart_amba_port *)port;
368 unsigned int cr;
369 int retval;
370
371 /*
372 * Try to enable the clock producer.
373 */
374 retval = clk_enable(uap->clk);
375 if (retval)
376 goto out;
377
378 uap->port.uartclk = clk_get_rate(uap->clk);
379
380 /*
381 * Allocate the IRQ
382 */
383 retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
384 if (retval)
385 goto clk_dis;
386
Alessandro Rubini5926a292009-06-04 17:43:04 +0100387 writew(uap->ifls, uap->port.membase + UART011_IFLS);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388
389 /*
390 * Provoke TX FIFO interrupt into asserting.
391 */
392 cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
393 writew(cr, uap->port.membase + UART011_CR);
394 writew(0, uap->port.membase + UART011_FBRD);
395 writew(1, uap->port.membase + UART011_IBRD);
396 writew(0, uap->port.membase + UART011_LCRH);
397 writew(0, uap->port.membase + UART01x_DR);
398 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
399 barrier();
400
401 cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
402 writew(cr, uap->port.membase + UART011_CR);
403
404 /*
405 * initialise the old status of the modem signals
406 */
407 uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
408
409 /*
410 * Finally, enable interrupts
411 */
412 spin_lock_irq(&uap->port.lock);
413 uap->im = UART011_RXIM | UART011_RTIM;
414 writew(uap->im, uap->port.membase + UART011_IMSC);
415 spin_unlock_irq(&uap->port.lock);
416
417 return 0;
418
419 clk_dis:
420 clk_disable(uap->clk);
421 out:
422 return retval;
423}
424
425static void pl011_shutdown(struct uart_port *port)
426{
427 struct uart_amba_port *uap = (struct uart_amba_port *)port;
428 unsigned long val;
429
430 /*
431 * disable all interrupts
432 */
433 spin_lock_irq(&uap->port.lock);
434 uap->im = 0;
435 writew(uap->im, uap->port.membase + UART011_IMSC);
436 writew(0xffff, uap->port.membase + UART011_ICR);
437 spin_unlock_irq(&uap->port.lock);
438
439 /*
440 * Free the interrupt
441 */
442 free_irq(uap->port.irq, uap);
443
444 /*
445 * disable the port
446 */
Rabin Vincent3b438162010-02-12 06:43:11 +0100447 uap->autorts = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448 writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
449
450 /*
451 * disable break condition and fifos
452 */
453 val = readw(uap->port.membase + UART011_LCRH);
454 val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
455 writew(val, uap->port.membase + UART011_LCRH);
456
457 /*
458 * Shut down the clock producer
459 */
460 clk_disable(uap->clk);
461}
462
463static void
Alan Cox606d0992006-12-08 02:38:45 -0800464pl011_set_termios(struct uart_port *port, struct ktermios *termios,
465 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466{
Rabin Vincent3b438162010-02-12 06:43:11 +0100467 struct uart_amba_port *uap = (struct uart_amba_port *)port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468 unsigned int lcr_h, old_cr;
469 unsigned long flags;
470 unsigned int baud, quot;
471
472 /*
473 * Ask the core to calculate the divisor for us.
474 */
475 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
476 quot = port->uartclk * 4 / baud;
477
478 switch (termios->c_cflag & CSIZE) {
479 case CS5:
480 lcr_h = UART01x_LCRH_WLEN_5;
481 break;
482 case CS6:
483 lcr_h = UART01x_LCRH_WLEN_6;
484 break;
485 case CS7:
486 lcr_h = UART01x_LCRH_WLEN_7;
487 break;
488 default: // CS8
489 lcr_h = UART01x_LCRH_WLEN_8;
490 break;
491 }
492 if (termios->c_cflag & CSTOPB)
493 lcr_h |= UART01x_LCRH_STP2;
494 if (termios->c_cflag & PARENB) {
495 lcr_h |= UART01x_LCRH_PEN;
496 if (!(termios->c_cflag & PARODD))
497 lcr_h |= UART01x_LCRH_EPS;
498 }
499 if (port->fifosize > 1)
500 lcr_h |= UART01x_LCRH_FEN;
501
502 spin_lock_irqsave(&port->lock, flags);
503
504 /*
505 * Update the per-port timeout.
506 */
507 uart_update_timeout(port, termios->c_cflag, baud);
508
Russell Kingb63d4f02005-11-19 11:10:35 +0000509 port->read_status_mask = UART011_DR_OE | 255;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510 if (termios->c_iflag & INPCK)
Russell Kingb63d4f02005-11-19 11:10:35 +0000511 port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 if (termios->c_iflag & (BRKINT | PARMRK))
Russell Kingb63d4f02005-11-19 11:10:35 +0000513 port->read_status_mask |= UART011_DR_BE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700514
515 /*
516 * Characters to ignore
517 */
518 port->ignore_status_mask = 0;
519 if (termios->c_iflag & IGNPAR)
Russell Kingb63d4f02005-11-19 11:10:35 +0000520 port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 if (termios->c_iflag & IGNBRK) {
Russell Kingb63d4f02005-11-19 11:10:35 +0000522 port->ignore_status_mask |= UART011_DR_BE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 /*
524 * If we're ignoring parity and break indicators,
525 * ignore overruns too (for real raw support).
526 */
527 if (termios->c_iflag & IGNPAR)
Russell Kingb63d4f02005-11-19 11:10:35 +0000528 port->ignore_status_mask |= UART011_DR_OE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529 }
530
531 /*
532 * Ignore all characters if CREAD is not set.
533 */
534 if ((termios->c_cflag & CREAD) == 0)
Russell Kingb63d4f02005-11-19 11:10:35 +0000535 port->ignore_status_mask |= UART_DUMMY_DR_RX;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536
537 if (UART_ENABLE_MS(port, termios->c_cflag))
538 pl011_enable_ms(port);
539
540 /* first, disable everything */
541 old_cr = readw(port->membase + UART011_CR);
542 writew(0, port->membase + UART011_CR);
543
Rabin Vincent3b438162010-02-12 06:43:11 +0100544 if (termios->c_cflag & CRTSCTS) {
545 if (old_cr & UART011_CR_RTS)
546 old_cr |= UART011_CR_RTSEN;
547
548 old_cr |= UART011_CR_CTSEN;
549 uap->autorts = true;
550 } else {
551 old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
552 uap->autorts = false;
553 }
554
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 /* Set baud rate */
556 writew(quot & 0x3f, port->membase + UART011_FBRD);
557 writew(quot >> 6, port->membase + UART011_IBRD);
558
559 /*
560 * ----------v----------v----------v----------v-----
561 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
562 * ----------^----------^----------^----------^-----
563 */
564 writew(lcr_h, port->membase + UART011_LCRH);
565 writew(old_cr, port->membase + UART011_CR);
566
567 spin_unlock_irqrestore(&port->lock, flags);
568}
569
570static const char *pl011_type(struct uart_port *port)
571{
572 return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
573}
574
575/*
576 * Release the memory region(s) being used by 'port'
577 */
578static void pl010_release_port(struct uart_port *port)
579{
580 release_mem_region(port->mapbase, SZ_4K);
581}
582
583/*
584 * Request the memory region(s) being used by 'port'
585 */
586static int pl010_request_port(struct uart_port *port)
587{
588 return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
589 != NULL ? 0 : -EBUSY;
590}
591
592/*
593 * Configure/autoconfigure the port.
594 */
595static void pl010_config_port(struct uart_port *port, int flags)
596{
597 if (flags & UART_CONFIG_TYPE) {
598 port->type = PORT_AMBA;
599 pl010_request_port(port);
600 }
601}
602
603/*
604 * verify the new serial_struct (for TIOCSSERIAL).
605 */
606static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
607{
608 int ret = 0;
609 if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
610 ret = -EINVAL;
Yinghai Lua62c4132008-08-19 20:49:55 -0700611 if (ser->irq < 0 || ser->irq >= nr_irqs)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612 ret = -EINVAL;
613 if (ser->baud_base < 9600)
614 ret = -EINVAL;
615 return ret;
616}
617
618static struct uart_ops amba_pl011_pops = {
619 .tx_empty = pl01x_tx_empty,
620 .set_mctrl = pl011_set_mctrl,
621 .get_mctrl = pl01x_get_mctrl,
622 .stop_tx = pl011_stop_tx,
623 .start_tx = pl011_start_tx,
624 .stop_rx = pl011_stop_rx,
625 .enable_ms = pl011_enable_ms,
626 .break_ctl = pl011_break_ctl,
627 .startup = pl011_startup,
628 .shutdown = pl011_shutdown,
629 .set_termios = pl011_set_termios,
630 .type = pl011_type,
631 .release_port = pl010_release_port,
632 .request_port = pl010_request_port,
633 .config_port = pl010_config_port,
634 .verify_port = pl010_verify_port,
Jason Wessel84b5ae12008-02-20 13:33:39 -0600635#ifdef CONFIG_CONSOLE_POLL
636 .poll_get_char = pl010_get_poll_char,
637 .poll_put_char = pl010_put_poll_char,
638#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639};
640
641static struct uart_amba_port *amba_ports[UART_NR];
642
643#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
644
Russell Kingd3587882006-03-20 20:00:09 +0000645static void pl011_console_putchar(struct uart_port *port, int ch)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646{
Russell Kingd3587882006-03-20 20:00:09 +0000647 struct uart_amba_port *uap = (struct uart_amba_port *)port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648
Russell Kingd3587882006-03-20 20:00:09 +0000649 while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
650 barrier();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700651 writew(ch, uap->port.membase + UART01x_DR);
652}
653
654static void
655pl011_console_write(struct console *co, const char *s, unsigned int count)
656{
657 struct uart_amba_port *uap = amba_ports[co->index];
658 unsigned int status, old_cr, new_cr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700659
660 clk_enable(uap->clk);
661
662 /*
663 * First save the CR then disable the interrupts
664 */
665 old_cr = readw(uap->port.membase + UART011_CR);
666 new_cr = old_cr & ~UART011_CR_CTSEN;
667 new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
668 writew(new_cr, uap->port.membase + UART011_CR);
669
Russell Kingd3587882006-03-20 20:00:09 +0000670 uart_console_write(&uap->port, s, count, pl011_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671
672 /*
673 * Finally, wait for transmitter to become empty
674 * and restore the TCR
675 */
676 do {
677 status = readw(uap->port.membase + UART01x_FR);
678 } while (status & UART01x_FR_BUSY);
679 writew(old_cr, uap->port.membase + UART011_CR);
680
681 clk_disable(uap->clk);
682}
683
684static void __init
685pl011_console_get_options(struct uart_amba_port *uap, int *baud,
686 int *parity, int *bits)
687{
688 if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
689 unsigned int lcr_h, ibrd, fbrd;
690
691 lcr_h = readw(uap->port.membase + UART011_LCRH);
692
693 *parity = 'n';
694 if (lcr_h & UART01x_LCRH_PEN) {
695 if (lcr_h & UART01x_LCRH_EPS)
696 *parity = 'e';
697 else
698 *parity = 'o';
699 }
700
701 if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
702 *bits = 7;
703 else
704 *bits = 8;
705
706 ibrd = readw(uap->port.membase + UART011_IBRD);
707 fbrd = readw(uap->port.membase + UART011_FBRD);
708
709 *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
710 }
711}
712
713static int __init pl011_console_setup(struct console *co, char *options)
714{
715 struct uart_amba_port *uap;
716 int baud = 38400;
717 int bits = 8;
718 int parity = 'n';
719 int flow = 'n';
720
721 /*
722 * Check whether an invalid uart number has been specified, and
723 * if so, search for the first available port that does have
724 * console support.
725 */
726 if (co->index >= UART_NR)
727 co->index = 0;
728 uap = amba_ports[co->index];
Russell Kingd28122a2007-01-22 18:59:42 +0000729 if (!uap)
730 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731
732 uap->port.uartclk = clk_get_rate(uap->clk);
733
734 if (options)
735 uart_parse_options(options, &baud, &parity, &bits, &flow);
736 else
737 pl011_console_get_options(uap, &baud, &parity, &bits);
738
739 return uart_set_options(&uap->port, co, baud, parity, bits, flow);
740}
741
Vincent Sanders2d934862005-09-14 22:36:03 +0100742static struct uart_driver amba_reg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743static struct console amba_console = {
744 .name = "ttyAMA",
745 .write = pl011_console_write,
746 .device = uart_console_device,
747 .setup = pl011_console_setup,
748 .flags = CON_PRINTBUFFER,
749 .index = -1,
750 .data = &amba_reg,
751};
752
753#define AMBA_CONSOLE (&amba_console)
754#else
755#define AMBA_CONSOLE NULL
756#endif
757
758static struct uart_driver amba_reg = {
759 .owner = THIS_MODULE,
760 .driver_name = "ttyAMA",
761 .dev_name = "ttyAMA",
762 .major = SERIAL_AMBA_MAJOR,
763 .minor = SERIAL_AMBA_MINOR,
764 .nr = UART_NR,
765 .cons = AMBA_CONSOLE,
766};
767
Alessandro Rubini03fbdb12009-05-20 22:39:08 +0100768static int pl011_probe(struct amba_device *dev, struct amba_id *id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700769{
770 struct uart_amba_port *uap;
Alessandro Rubini5926a292009-06-04 17:43:04 +0100771 struct vendor_data *vendor = id->data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700772 void __iomem *base;
773 int i, ret;
774
775 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
776 if (amba_ports[i] == NULL)
777 break;
778
779 if (i == ARRAY_SIZE(amba_ports)) {
780 ret = -EBUSY;
781 goto out;
782 }
783
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700784 uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 if (uap == NULL) {
786 ret = -ENOMEM;
787 goto out;
788 }
789
Linus Walleijdc890c22009-06-07 23:27:31 +0100790 base = ioremap(dev->res.start, resource_size(&dev->res));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700791 if (!base) {
792 ret = -ENOMEM;
793 goto free;
794 }
795
Russell Kingee569c42008-11-30 17:38:14 +0000796 uap->clk = clk_get(&dev->dev, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 if (IS_ERR(uap->clk)) {
798 ret = PTR_ERR(uap->clk);
799 goto unmap;
800 }
801
Alessandro Rubini5926a292009-06-04 17:43:04 +0100802 uap->ifls = vendor->ifls;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700803 uap->port.dev = &dev->dev;
804 uap->port.mapbase = dev->res.start;
805 uap->port.membase = base;
806 uap->port.iotype = UPIO_MEM;
807 uap->port.irq = dev->irq[0];
Alessandro Rubini5926a292009-06-04 17:43:04 +0100808 uap->port.fifosize = vendor->fifosize;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700809 uap->port.ops = &amba_pl011_pops;
810 uap->port.flags = UPF_BOOT_AUTOCONF;
811 uap->port.line = i;
812
813 amba_ports[i] = uap;
814
815 amba_set_drvdata(dev, uap);
816 ret = uart_add_one_port(&amba_reg, &uap->port);
817 if (ret) {
818 amba_set_drvdata(dev, NULL);
819 amba_ports[i] = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700820 clk_put(uap->clk);
821 unmap:
822 iounmap(base);
823 free:
824 kfree(uap);
825 }
826 out:
827 return ret;
828}
829
830static int pl011_remove(struct amba_device *dev)
831{
832 struct uart_amba_port *uap = amba_get_drvdata(dev);
833 int i;
834
835 amba_set_drvdata(dev, NULL);
836
837 uart_remove_one_port(&amba_reg, &uap->port);
838
839 for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
840 if (amba_ports[i] == uap)
841 amba_ports[i] = NULL;
842
843 iounmap(uap->port.membase);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700844 clk_put(uap->clk);
845 kfree(uap);
846 return 0;
847}
848
Leo Chenb736b892009-07-28 23:43:33 +0100849#ifdef CONFIG_PM
850static int pl011_suspend(struct amba_device *dev, pm_message_t state)
851{
852 struct uart_amba_port *uap = amba_get_drvdata(dev);
853
854 if (!uap)
855 return -EINVAL;
856
857 return uart_suspend_port(&amba_reg, &uap->port);
858}
859
860static int pl011_resume(struct amba_device *dev)
861{
862 struct uart_amba_port *uap = amba_get_drvdata(dev);
863
864 if (!uap)
865 return -EINVAL;
866
867 return uart_resume_port(&amba_reg, &uap->port);
868}
869#endif
870
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871static struct amba_id pl011_ids[] __initdata = {
872 {
873 .id = 0x00041011,
874 .mask = 0x000fffff,
Alessandro Rubini5926a292009-06-04 17:43:04 +0100875 .data = &vendor_arm,
876 },
877 {
878 .id = 0x00380802,
879 .mask = 0x00ffffff,
880 .data = &vendor_st,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700881 },
882 { 0, 0 },
883};
884
885static struct amba_driver pl011_driver = {
886 .drv = {
887 .name = "uart-pl011",
888 },
889 .id_table = pl011_ids,
890 .probe = pl011_probe,
891 .remove = pl011_remove,
Leo Chenb736b892009-07-28 23:43:33 +0100892#ifdef CONFIG_PM
893 .suspend = pl011_suspend,
894 .resume = pl011_resume,
895#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700896};
897
898static int __init pl011_init(void)
899{
900 int ret;
901 printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
902
903 ret = uart_register_driver(&amba_reg);
904 if (ret == 0) {
905 ret = amba_driver_register(&pl011_driver);
906 if (ret)
907 uart_unregister_driver(&amba_reg);
908 }
909 return ret;
910}
911
912static void __exit pl011_exit(void)
913{
914 amba_driver_unregister(&pl011_driver);
915 uart_unregister_driver(&amba_reg);
916}
917
Alessandro Rubini4dd9e742009-05-05 05:54:13 +0100918/*
919 * While this can be a module, if builtin it's most likely the console
920 * So let's leave module_exit but move module_init to an earlier place
921 */
922arch_initcall(pl011_init);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700923module_exit(pl011_exit);
924
925MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
926MODULE_DESCRIPTION("ARM AMBA serial port driver");
927MODULE_LICENSE("GPL");