Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | lne390.c |
| 3 | |
| 4 | Linux driver for Mylex LNE390 EISA Network Adapter |
| 5 | |
| 6 | Copyright (C) 1996-1998, Paul Gortmaker. |
| 7 | |
| 8 | This software may be used and distributed according to the terms |
| 9 | of the GNU General Public License, incorporated herein by reference. |
| 10 | |
| 11 | Information and Code Sources: |
| 12 | |
| 13 | 1) Based upon framework of es3210 driver. |
| 14 | 2) The existing myriad of other Linux 8390 drivers by Donald Becker. |
| 15 | 3) Russ Nelson's asm packet driver provided additional info. |
| 16 | 4) Info for getting IRQ and sh-mem gleaned from the EISA cfg files. |
| 17 | |
| 18 | The LNE390 is an EISA shared memory NS8390 implementation. Note |
| 19 | that all memory copies to/from the board must be 32bit transfers. |
| 20 | There are two versions of the card: the lne390a and the lne390b. |
| 21 | Going by the EISA cfg files, the "a" has jumpers to select between |
| 22 | BNC/AUI, but the "b" also has RJ-45 and selection is via the SCU. |
| 23 | The shared memory address selection is also slightly different. |
| 24 | Note that shared memory address > 1MB are supported with this driver. |
| 25 | |
| 26 | You can try <http://www.mylex.com> if you want more info, as I've |
| 27 | never even seen one of these cards. :) |
| 28 | |
| 29 | Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/01 |
| 30 | - get rid of check_region |
| 31 | - no need to check if dev == NULL in lne390_probe1 |
| 32 | */ |
| 33 | |
| 34 | static const char *version = |
| 35 | "lne390.c: Driver revision v0.99.1, 01/09/2000\n"; |
| 36 | |
| 37 | #include <linux/module.h> |
| 38 | #include <linux/eisa.h> |
| 39 | #include <linux/kernel.h> |
| 40 | #include <linux/errno.h> |
| 41 | #include <linux/string.h> |
| 42 | #include <linux/delay.h> |
| 43 | #include <linux/init.h> |
Alexey Dobriyan | a6b7a40 | 2011-06-06 10:43:46 +0000 | [diff] [blame] | 44 | #include <linux/interrupt.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 45 | #include <linux/netdevice.h> |
| 46 | #include <linux/etherdevice.h> |
| 47 | |
| 48 | #include <asm/io.h> |
| 49 | #include <asm/system.h> |
| 50 | |
| 51 | #include "8390.h" |
| 52 | |
| 53 | #define DRV_NAME "lne390" |
| 54 | |
| 55 | static int lne390_probe1(struct net_device *dev, int ioaddr); |
| 56 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 57 | static void lne390_reset_8390(struct net_device *dev); |
| 58 | |
| 59 | static void lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page); |
| 60 | static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset); |
| 61 | static void lne390_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page); |
| 62 | |
| 63 | #define LNE390_START_PG 0x00 /* First page of TX buffer */ |
| 64 | #define LNE390_STOP_PG 0x80 /* Last page +1 of RX ring */ |
| 65 | |
| 66 | #define LNE390_ID_PORT 0xc80 /* Same for all EISA cards */ |
| 67 | #define LNE390_IO_EXTENT 0x20 |
| 68 | #define LNE390_SA_PROM 0x16 /* Start of e'net addr. */ |
| 69 | #define LNE390_RESET_PORT 0xc84 /* From the pkt driver source */ |
| 70 | #define LNE390_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */ |
| 71 | |
| 72 | #define LNE390_ADDR0 0x00 /* 3 byte vendor prefix */ |
| 73 | #define LNE390_ADDR1 0x80 |
| 74 | #define LNE390_ADDR2 0xe5 |
| 75 | |
| 76 | #define LNE390_ID0 0x10009835 /* 0x3598 = 01101 01100 11000 = mlx */ |
| 77 | #define LNE390_ID1 0x11009835 /* above is the 390A, this is 390B */ |
| 78 | |
| 79 | #define LNE390_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */ |
| 80 | #define LNE390_CFG2 0xc90 |
| 81 | |
| 82 | /* |
| 83 | * You can OR any of the following bits together and assign it |
| 84 | * to LNE390_DEBUG to get verbose driver info during operation. |
| 85 | * Currently only the probe one is implemented. |
| 86 | */ |
| 87 | |
| 88 | #define LNE390_D_PROBE 0x01 |
| 89 | #define LNE390_D_RX_PKT 0x02 |
| 90 | #define LNE390_D_TX_PKT 0x04 |
| 91 | #define LNE390_D_IRQ 0x08 |
| 92 | |
| 93 | #define LNE390_DEBUG 0 |
| 94 | |
| 95 | static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; |
| 96 | static unsigned int shmem_mapA[] __initdata = {0xff, 0xfe, 0xfd, 0xfff, 0xffe, 0xffc, 0x0d, 0x0}; |
| 97 | static unsigned int shmem_mapB[] __initdata = {0xff, 0xfe, 0x0e, 0xfff, 0xffe, 0xffc, 0x0d, 0x0}; |
| 98 | |
| 99 | /* |
| 100 | * Probe for the card. The best way is to read the EISA ID if it |
| 101 | * is known. Then we can check the prefix of the station address |
| 102 | * PROM for a match against the value assigned to Mylex. |
| 103 | */ |
| 104 | |
| 105 | static int __init do_lne390_probe(struct net_device *dev) |
| 106 | { |
| 107 | unsigned short ioaddr = dev->base_addr; |
| 108 | int irq = dev->irq; |
| 109 | int mem_start = dev->mem_start; |
| 110 | int ret; |
| 111 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 112 | if (ioaddr > 0x1ff) { /* Check a single specified location. */ |
| 113 | if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME)) |
| 114 | return -EBUSY; |
| 115 | ret = lne390_probe1(dev, ioaddr); |
| 116 | if (ret) |
| 117 | release_region(ioaddr, LNE390_IO_EXTENT); |
| 118 | return ret; |
| 119 | } |
| 120 | else if (ioaddr > 0) /* Don't probe at all. */ |
| 121 | return -ENXIO; |
| 122 | |
| 123 | if (!EISA_bus) { |
| 124 | #if LNE390_DEBUG & LNE390_D_PROBE |
| 125 | printk("lne390-debug: Not an EISA bus. Not probing high ports.\n"); |
| 126 | #endif |
| 127 | return -ENXIO; |
| 128 | } |
| 129 | |
| 130 | /* EISA spec allows for up to 16 slots, but 8 is typical. */ |
| 131 | for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { |
| 132 | if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME)) |
| 133 | continue; |
| 134 | if (lne390_probe1(dev, ioaddr) == 0) |
| 135 | return 0; |
| 136 | release_region(ioaddr, LNE390_IO_EXTENT); |
| 137 | dev->irq = irq; |
| 138 | dev->mem_start = mem_start; |
| 139 | } |
| 140 | |
| 141 | return -ENODEV; |
| 142 | } |
| 143 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 144 | #ifndef MODULE |
| 145 | struct net_device * __init lne390_probe(int unit) |
| 146 | { |
| 147 | struct net_device *dev = alloc_ei_netdev(); |
| 148 | int err; |
| 149 | |
| 150 | if (!dev) |
| 151 | return ERR_PTR(-ENOMEM); |
| 152 | |
| 153 | sprintf(dev->name, "eth%d", unit); |
| 154 | netdev_boot_setup_check(dev); |
| 155 | |
| 156 | err = do_lne390_probe(dev); |
| 157 | if (err) |
| 158 | goto out; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 159 | return dev; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 160 | out: |
| 161 | free_netdev(dev); |
| 162 | return ERR_PTR(err); |
| 163 | } |
| 164 | #endif |
| 165 | |
| 166 | static int __init lne390_probe1(struct net_device *dev, int ioaddr) |
| 167 | { |
| 168 | int i, revision, ret; |
| 169 | unsigned long eisa_id; |
| 170 | |
| 171 | if (inb_p(ioaddr + LNE390_ID_PORT) == 0xff) return -ENODEV; |
| 172 | |
| 173 | #if LNE390_DEBUG & LNE390_D_PROBE |
| 174 | printk("lne390-debug: probe at %#x, ID %#8x\n", ioaddr, inl(ioaddr + LNE390_ID_PORT)); |
| 175 | printk("lne390-debug: config regs: %#x %#x\n", |
| 176 | inb(ioaddr + LNE390_CFG1), inb(ioaddr + LNE390_CFG2)); |
| 177 | #endif |
| 178 | |
| 179 | |
| 180 | /* Check the EISA ID of the card. */ |
| 181 | eisa_id = inl(ioaddr + LNE390_ID_PORT); |
| 182 | if ((eisa_id != LNE390_ID0) && (eisa_id != LNE390_ID1)) { |
| 183 | return -ENODEV; |
| 184 | } |
| 185 | |
| 186 | revision = (eisa_id >> 24) & 0x01; /* 0 = rev A, 1 rev B */ |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 187 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 188 | #if 0 |
| 189 | /* Check the Mylex vendor ID as well. Not really required. */ |
| 190 | if (inb(ioaddr + LNE390_SA_PROM + 0) != LNE390_ADDR0 |
| 191 | || inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1 |
| 192 | || inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) { |
| 193 | printk("lne390.c: card not found"); |
Joe Perches | 104bf3f | 2011-11-16 09:38:03 +0000 | [diff] [blame] | 194 | for (i = 0; i < ETH_ALEN; i++) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 195 | printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i)); |
| 196 | printk(" (invalid prefix).\n"); |
| 197 | return -ENODEV; |
| 198 | } |
| 199 | #endif |
| 200 | |
Joe Perches | 104bf3f | 2011-11-16 09:38:03 +0000 | [diff] [blame] | 201 | for (i = 0; i < ETH_ALEN; i++) |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 202 | dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i); |
Johannes Berg | e174961 | 2008-10-27 15:59:26 -0700 | [diff] [blame] | 203 | printk("lne390.c: LNE390%X in EISA slot %d, address %pM.\n", |
| 204 | 0xa+revision, ioaddr/0x1000, dev->dev_addr); |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 205 | |
| 206 | printk("lne390.c: "); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 207 | |
| 208 | /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */ |
| 209 | if (dev->irq == 0) { |
| 210 | unsigned char irq_reg = inb(ioaddr + LNE390_CFG2) >> 3; |
| 211 | dev->irq = irq_map[irq_reg & 0x07]; |
| 212 | printk("using"); |
| 213 | } else { |
| 214 | /* This is useless unless we reprogram the card here too */ |
| 215 | if (dev->irq == 2) dev->irq = 9; /* Doh! */ |
| 216 | printk("assigning"); |
| 217 | } |
| 218 | printk(" IRQ %d,", dev->irq); |
| 219 | |
| 220 | if ((ret = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev))) { |
| 221 | printk (" unable to get IRQ %d.\n", dev->irq); |
| 222 | return ret; |
| 223 | } |
| 224 | |
| 225 | if (dev->mem_start == 0) { |
| 226 | unsigned char mem_reg = inb(ioaddr + LNE390_CFG2) & 0x07; |
| 227 | |
| 228 | if (revision) /* LNE390B */ |
| 229 | dev->mem_start = shmem_mapB[mem_reg] * 0x10000; |
| 230 | else /* LNE390A */ |
| 231 | dev->mem_start = shmem_mapA[mem_reg] * 0x10000; |
| 232 | printk(" using "); |
| 233 | } else { |
| 234 | /* Should check for value in shmem_map and reprogram the card to use it */ |
| 235 | dev->mem_start &= 0xfff0000; |
| 236 | printk(" assigning "); |
| 237 | } |
| 238 | |
| 239 | printk("%dkB memory at physical address %#lx\n", |
| 240 | LNE390_STOP_PG/4, dev->mem_start); |
| 241 | |
| 242 | /* |
| 243 | BEWARE!! Some dain-bramaged EISA SCUs will allow you to put |
| 244 | the card mem within the region covered by `normal' RAM !!! |
| 245 | |
| 246 | ioremap() will fail in that case. |
| 247 | */ |
| 248 | ei_status.mem = ioremap(dev->mem_start, LNE390_STOP_PG*0x100); |
| 249 | if (!ei_status.mem) { |
| 250 | printk(KERN_ERR "lne390.c: Unable to remap card memory above 1MB !!\n"); |
| 251 | printk(KERN_ERR "lne390.c: Try using EISA SCU to set memory below 1MB.\n"); |
| 252 | printk(KERN_ERR "lne390.c: Driver NOT installed.\n"); |
| 253 | ret = -EAGAIN; |
| 254 | goto cleanup; |
| 255 | } |
| 256 | printk("lne390.c: remapped %dkB card memory to virtual address %p\n", |
| 257 | LNE390_STOP_PG/4, ei_status.mem); |
| 258 | |
| 259 | dev->mem_start = (unsigned long)ei_status.mem; |
| 260 | dev->mem_end = dev->mem_start + (LNE390_STOP_PG - LNE390_START_PG)*256; |
| 261 | |
| 262 | /* The 8390 offset is zero for the LNE390 */ |
| 263 | dev->base_addr = ioaddr; |
| 264 | |
| 265 | ei_status.name = "LNE390"; |
| 266 | ei_status.tx_start_page = LNE390_START_PG; |
| 267 | ei_status.rx_start_page = LNE390_START_PG + TX_PAGES; |
| 268 | ei_status.stop_page = LNE390_STOP_PG; |
| 269 | ei_status.word16 = 1; |
| 270 | |
| 271 | if (ei_debug > 0) |
| 272 | printk(version); |
| 273 | |
| 274 | ei_status.reset_8390 = &lne390_reset_8390; |
| 275 | ei_status.block_input = &lne390_block_input; |
| 276 | ei_status.block_output = &lne390_block_output; |
| 277 | ei_status.get_8390_hdr = &lne390_get_8390_hdr; |
| 278 | |
Stephen Hemminger | 0ec4d4f | 2008-11-25 18:24:38 -0800 | [diff] [blame] | 279 | dev->netdev_ops = &ei_netdev_ops; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 280 | NS8390_init(dev, 0); |
| b1fc550 | 2005-05-12 20:11:55 -0400 | [diff] [blame] | 281 | |
| 282 | ret = register_netdev(dev); |
| 283 | if (ret) |
| 284 | goto unmap; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 285 | return 0; |
| b1fc550 | 2005-05-12 20:11:55 -0400 | [diff] [blame] | 286 | unmap: |
| 287 | if (ei_status.reg0) |
viro@ZenIV.linux.org.uk | 387d890 | 2005-09-09 17:22:14 +0100 | [diff] [blame] | 288 | iounmap(ei_status.mem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 289 | cleanup: |
| 290 | free_irq(dev->irq, dev); |
| 291 | return ret; |
| 292 | } |
| 293 | |
| 294 | /* |
| 295 | * Reset as per the packet driver method. Judging by the EISA cfg |
| 296 | * file, this just toggles the "Board Enable" bits (bit 2 and 0). |
| 297 | */ |
| 298 | |
| 299 | static void lne390_reset_8390(struct net_device *dev) |
| 300 | { |
| 301 | unsigned short ioaddr = dev->base_addr; |
| 302 | |
| 303 | outb(0x04, ioaddr + LNE390_RESET_PORT); |
| 304 | if (ei_debug > 1) printk("%s: resetting the LNE390...", dev->name); |
| 305 | |
| 306 | mdelay(2); |
| 307 | |
| 308 | ei_status.txing = 0; |
| 309 | outb(0x01, ioaddr + LNE390_RESET_PORT); |
| 310 | if (ei_debug > 1) printk("reset done\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 311 | } |
| 312 | |
| 313 | /* |
| 314 | * Note: In the following three functions is the implicit assumption |
| 315 | * that the associated memcpy will only use "rep; movsl" as long as |
| 316 | * we keep the counts as some multiple of doublewords. This is a |
| 317 | * requirement of the hardware, and also prevents us from using |
| 318 | * eth_io_copy_and_sum() since we can't guarantee it will limit |
| 319 | * itself to doubleword access. |
| 320 | */ |
| 321 | |
| 322 | /* |
| 323 | * Grab the 8390 specific header. Similar to the block_input routine, but |
| 324 | * we don't need to be concerned with ring wrap as the header will be at |
| 325 | * the start of a page, so we optimize accordingly. (A single doubleword.) |
| 326 | */ |
| 327 | |
| 328 | static void |
| 329 | lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) |
| 330 | { |
| 331 | void __iomem *hdr_start = ei_status.mem + ((ring_page - LNE390_START_PG)<<8); |
| 332 | memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); |
| 333 | hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */ |
| 334 | } |
| 335 | |
Jeff Garzik | 6aa20a2 | 2006-09-13 13:24:59 -0400 | [diff] [blame] | 336 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 337 | * Block input and output are easy on shared memory ethercards, the only |
| 338 | * complication is when the ring buffer wraps. The count will already |
| 339 | * be rounded up to a doubleword value via lne390_get_8390_hdr() above. |
| 340 | */ |
| 341 | |
| 342 | static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb, |
| 343 | int ring_offset) |
| 344 | { |
| 345 | void __iomem *xfer_start = ei_status.mem + ring_offset - (LNE390_START_PG<<8); |
| 346 | |
| 347 | if (ring_offset + count > (LNE390_STOP_PG<<8)) { |
| 348 | /* Packet wraps over end of ring buffer. */ |
| 349 | int semi_count = (LNE390_STOP_PG<<8) - ring_offset; |
| 350 | memcpy_fromio(skb->data, xfer_start, semi_count); |
| 351 | count -= semi_count; |
| 352 | memcpy_fromio(skb->data + semi_count, |
| 353 | ei_status.mem + (TX_PAGES<<8), count); |
| 354 | } else { |
| 355 | /* Packet is in one chunk. */ |
| 356 | memcpy_fromio(skb->data, xfer_start, count); |
| 357 | } |
| 358 | } |
| 359 | |
| 360 | static void lne390_block_output(struct net_device *dev, int count, |
| 361 | const unsigned char *buf, int start_page) |
| 362 | { |
| 363 | void __iomem *shmem = ei_status.mem + ((start_page - LNE390_START_PG)<<8); |
| 364 | |
| 365 | count = (count + 3) & ~3; /* Round up to doubleword */ |
| 366 | memcpy_toio(shmem, buf, count); |
| 367 | } |
| 368 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 369 | |
| 370 | #ifdef MODULE |
| 371 | #define MAX_LNE_CARDS 4 /* Max number of LNE390 cards per module */ |
| 372 | static struct net_device *dev_lne[MAX_LNE_CARDS]; |
| 373 | static int io[MAX_LNE_CARDS]; |
| 374 | static int irq[MAX_LNE_CARDS]; |
| 375 | static int mem[MAX_LNE_CARDS]; |
| 376 | |
| 377 | module_param_array(io, int, NULL, 0); |
| 378 | module_param_array(irq, int, NULL, 0); |
| 379 | module_param_array(mem, int, NULL, 0); |
| 380 | MODULE_PARM_DESC(io, "I/O base address(es)"); |
| 381 | MODULE_PARM_DESC(irq, "IRQ number(s)"); |
| 382 | MODULE_PARM_DESC(mem, "memory base address(es)"); |
| 383 | MODULE_DESCRIPTION("Mylex LNE390A/B EISA Ethernet driver"); |
| 384 | MODULE_LICENSE("GPL"); |
| 385 | |
Andrew Morton | dab3d02 | 2006-08-14 23:00:04 -0700 | [diff] [blame] | 386 | int __init init_module(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 387 | { |
| 388 | struct net_device *dev; |
| 389 | int this_dev, found = 0; |
| 390 | |
| 391 | for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) { |
| 392 | if (io[this_dev] == 0 && this_dev != 0) |
| 393 | break; |
| 394 | dev = alloc_ei_netdev(); |
| 395 | if (!dev) |
| 396 | break; |
| 397 | dev->irq = irq[this_dev]; |
| 398 | dev->base_addr = io[this_dev]; |
| 399 | dev->mem_start = mem[this_dev]; |
| 400 | if (do_lne390_probe(dev) == 0) { |
| b1fc550 | 2005-05-12 20:11:55 -0400 | [diff] [blame] | 401 | dev_lne[found++] = dev; |
| 402 | continue; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 403 | } |
| 404 | free_netdev(dev); |
| 405 | printk(KERN_WARNING "lne390.c: No LNE390 card found (i/o = 0x%x).\n", io[this_dev]); |
| 406 | break; |
| 407 | } |
| 408 | if (found) |
| 409 | return 0; |
| 410 | return -ENXIO; |
| 411 | } |
| 412 | |
Denis Vlasenko | 64916f1 | 2006-01-05 22:45:47 -0800 | [diff] [blame] | 413 | static void cleanup_card(struct net_device *dev) |
| 414 | { |
| 415 | free_irq(dev->irq, dev); |
| 416 | release_region(dev->base_addr, LNE390_IO_EXTENT); |
| 417 | iounmap(ei_status.mem); |
| 418 | } |
| 419 | |
Al Viro | afc8eb4 | 2006-06-14 18:50:53 -0400 | [diff] [blame] | 420 | void __exit cleanup_module(void) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 421 | { |
| 422 | int this_dev; |
| 423 | |
| 424 | for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) { |
| 425 | struct net_device *dev = dev_lne[this_dev]; |
| 426 | if (dev) { |
| 427 | unregister_netdev(dev); |
| 428 | cleanup_card(dev); |
| 429 | free_netdev(dev); |
| 430 | } |
| 431 | } |
| 432 | } |
| 433 | #endif /* MODULE */ |
| 434 | |