blob: f0d14452632b554fa3d85681d075a729b54ebb2f [file] [log] [blame]
Steven Rostedt8da38212008-08-14 15:45:07 -04001#!/usr/bin/perl -w
2# (c) 2008, Steven Rostedt <srostedt@redhat.com>
3# Licensed under the terms of the GNU GPL License version 2
4#
5# recordmcount.pl - makes a section called __mcount_loc that holds
6# all the offsets to the calls to mcount.
7#
8#
Li Hongd49f6aa2009-10-28 13:01:38 +08009# What we want to end up with this is that each object file will have a
10# section called __mcount_loc that will hold the list of pointers to mcount
11# callers. After final linking, the vmlinux will have within .init.data the
12# list of all callers to mcount between __start_mcount_loc and __stop_mcount_loc.
13# Later on boot up, the kernel will read this list, save the locations and turn
14# them into nops. When tracing or profiling is later enabled, these locations
15# will then be converted back to pointers to some function.
Steven Rostedt8da38212008-08-14 15:45:07 -040016#
17# This is no easy feat. This script is called just after the original
18# object is compiled and before it is linked.
19#
Li Hongd49f6aa2009-10-28 13:01:38 +080020# When parse this object file using 'objdump', the references to the call
21# sites are offsets from the section that the call site is in. Hence, all
22# functions in a section that has a call site to mcount, will have the
23# offset from the beginning of the section and not the beginning of the
24# function.
Steven Rostedt8da38212008-08-14 15:45:07 -040025#
Li Hongd49f6aa2009-10-28 13:01:38 +080026# But where this section will reside finally in vmlinx is undetermined at
27# this point. So we can't use this kind of offsets to record the final
28# address of this call site.
29#
30# The trick is to change the call offset referring the start of a section to
31# referring a function symbol in this section. During the link step, 'ld' will
32# compute the final address according to the information we record.
33#
Steven Rostedt8da38212008-08-14 15:45:07 -040034# e.g.
35#
Tim Abbott31b6e762009-04-30 20:06:11 -040036# .section ".sched.text", "ax"
Steven Rostedt8da38212008-08-14 15:45:07 -040037# [...]
Li Hongd49f6aa2009-10-28 13:01:38 +080038# func1:
39# [...]
40# call mcount (offset: 0x10)
Steven Rostedt8da38212008-08-14 15:45:07 -040041# [...]
42# ret
Li Hongd49f6aa2009-10-28 13:01:38 +080043# .globl fun2
44# func2: (offset: 0x20)
Steven Rostedt8da38212008-08-14 15:45:07 -040045# [...]
Li Hongd49f6aa2009-10-28 13:01:38 +080046# [...]
47# ret
48# func3:
49# [...]
50# call mcount (offset: 0x30)
Steven Rostedt8da38212008-08-14 15:45:07 -040051# [...]
52#
53# Both relocation offsets for the mcounts in the above example will be
Li Hongd49f6aa2009-10-28 13:01:38 +080054# offset from .sched.text. If we choose global symbol func2 as a reference and
55# make another file called tmp.s with the new offsets:
Steven Rostedt8da38212008-08-14 15:45:07 -040056#
57# .section __mcount_loc
Li Hongd49f6aa2009-10-28 13:01:38 +080058# .quad func2 - 0x10
59# .quad func2 + 0x10
Steven Rostedt8da38212008-08-14 15:45:07 -040060#
Li Hongd49f6aa2009-10-28 13:01:38 +080061# We can then compile this tmp.s into tmp.o, and link it back to the original
Steven Rostedt8da38212008-08-14 15:45:07 -040062# object.
63#
Li Hongd49f6aa2009-10-28 13:01:38 +080064# In our algorithm, we will choose the first global function we meet in this
65# section as the reference. But this gets hard if there is no global functions
66# in this section. In such a case we have to select a local one. E.g. func1:
Steven Rostedt8da38212008-08-14 15:45:07 -040067#
Tim Abbott31b6e762009-04-30 20:06:11 -040068# .section ".sched.text", "ax"
Li Hongd49f6aa2009-10-28 13:01:38 +080069# func1:
Steven Rostedt8da38212008-08-14 15:45:07 -040070# [...]
Li Hongd49f6aa2009-10-28 13:01:38 +080071# call mcount (offset: 0x10)
Steven Rostedt8da38212008-08-14 15:45:07 -040072# [...]
73# ret
Li Hongd49f6aa2009-10-28 13:01:38 +080074# func2:
Steven Rostedt8da38212008-08-14 15:45:07 -040075# [...]
Li Hongd49f6aa2009-10-28 13:01:38 +080076# call mcount (offset: 0x20)
Steven Rostedt8da38212008-08-14 15:45:07 -040077# [...]
Li Hongd49f6aa2009-10-28 13:01:38 +080078# .section "other.section"
Steven Rostedt8da38212008-08-14 15:45:07 -040079#
80# If we make the tmp.s the same as above, when we link together with
Li Hongd49f6aa2009-10-28 13:01:38 +080081# the original object, we will end up with two symbols for func1:
Steven Rostedt8da38212008-08-14 15:45:07 -040082# one local, one global. After final compile, we will end up with
Li Hongd49f6aa2009-10-28 13:01:38 +080083# an undefined reference to func1 or a wrong reference to another global
84# func1 in other files.
Steven Rostedt8da38212008-08-14 15:45:07 -040085#
86# Since local objects can reference local variables, we need to find
87# a way to make tmp.o reference the local objects of the original object
Li Hongd49f6aa2009-10-28 13:01:38 +080088# file after it is linked together. To do this, we convert func1
Steven Rostedt8da38212008-08-14 15:45:07 -040089# into a global symbol before linking tmp.o. Then after we link tmp.o
Li Hongd49f6aa2009-10-28 13:01:38 +080090# we will only have a single symbol for func1 that is global.
91# We can convert func1 back into a local symbol and we are done.
Steven Rostedt8da38212008-08-14 15:45:07 -040092#
93# Here are the steps we take:
94#
Li Hong306dcf42009-10-28 13:06:19 +080095# 1) Record all the local and weak symbols by using 'nm'
Steven Rostedt8da38212008-08-14 15:45:07 -040096# 2) Use objdump to find all the call site offsets and sections for
97# mcount.
98# 3) Compile the list into its own object.
99# 4) Do we have to deal with local functions? If not, go to step 8.
100# 5) Make an object that converts these local functions to global symbols
101# with objcopy.
102# 6) Link together this new object with the list object.
103# 7) Convert the local functions back to local symbols and rename
104# the result as the original object.
Steven Rostedt8da38212008-08-14 15:45:07 -0400105# 8) Link the object with the list object.
106# 9) Move the result back to the original object.
Steven Rostedt8da38212008-08-14 15:45:07 -0400107#
108
109use strict;
110
111my $P = $0;
112$P =~ s@.*/@@g;
113
114my $V = '0.1';
115
Li Honge2d753f2009-10-27 14:57:33 +0800116if ($#ARGV != 10) {
Steven Rostedtb43f7092009-01-16 23:18:31 -0500117 print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
Steven Rostedt8da38212008-08-14 15:45:07 -0400118 print "version: $V\n";
119 exit(1);
120}
121
Steven Rostedtdce9d182008-10-23 09:32:57 -0400122my ($arch, $bits, $objdump, $objcopy, $cc,
Shaohua Li18c167f2009-01-12 10:00:51 +0800123 $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
Steven Rostedt8da38212008-08-14 15:45:07 -0400124
Shaohua Li25aac9d2009-01-09 11:29:40 +0800125# This file refers to mcount and shouldn't be ftraced, so lets' ignore it
Li Hongbdd3b052009-10-28 13:03:32 +0800126if ($inputfile =~ m,kernel/trace/ftrace\.o$,) {
Shaohua Li25aac9d2009-01-09 11:29:40 +0800127 exit(0);
128}
129
Steven Rostedt34698bc2008-10-23 09:32:58 -0400130# Acceptable sections to record.
131my %text_sections = (
132 ".text" => 1,
Liming Wangd144d5e2008-11-26 10:29:26 +0800133 ".sched.text" => 1,
134 ".spinlock.text" => 1,
Frederic Weisbeckera0343e82008-12-09 23:53:16 +0100135 ".irqentry.text" => 1,
Jiri Olsa4d828942009-10-13 16:33:54 -0400136 ".text.unlikely" => 1,
Steven Rostedt34698bc2008-10-23 09:32:58 -0400137);
138
Steven Rostedt8da38212008-08-14 15:45:07 -0400139$objdump = "objdump" if ((length $objdump) == 0);
140$objcopy = "objcopy" if ((length $objcopy) == 0);
141$cc = "gcc" if ((length $cc) == 0);
142$ld = "ld" if ((length $ld) == 0);
143$nm = "nm" if ((length $nm) == 0);
144$rm = "rm" if ((length $rm) == 0);
145$mv = "mv" if ((length $mv) == 0);
146
147#print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " .
148# "'$nm' '$rm' '$mv' '$inputfile'\n";
149
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400150my %locals; # List of local (static) functions
151my %weak; # List of weak functions
152my %convert; # List of local functions used that needs conversion
Steven Rostedt8da38212008-08-14 15:45:07 -0400153
154my $type;
Li Hong306dcf42009-10-28 13:06:19 +0800155my $local_regex; # Match a local function (return function)
156my $weak_regex; # Match a weak function (return function)
Steven Rostedt8da38212008-08-14 15:45:07 -0400157my $section_regex; # Find the start of a section
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400158my $function_regex; # Find the name of a function
159 # (return offset and func name)
Steven Rostedt8da38212008-08-14 15:45:07 -0400160my $mcount_regex; # Find the call site to mcount (return offset)
Matt Fleming3a3d04a2008-11-20 21:49:52 +0000161my $alignment; # The .align value to use for $mcount_section
Jim Radforde58918a2008-11-20 19:48:39 -0800162my $section_type; # Section header plus possible alignment command
Li Hong7b7edc22009-10-28 13:04:21 +0800163my $can_use_local = 0; # If we can use local function references
164
Steven Rostedt638adb02009-11-17 10:48:25 -0500165# Shut up recordmcount if user has older objcopy
166my $quiet_recordmcount = ".tmp_quiet_recordmcount";
167my $print_warning = 1;
168$print_warning = 0 if ( -f $quiet_recordmcount);
169
Li Hong7b7edc22009-10-28 13:04:21 +0800170##
171# check_objcopy - whether objcopy supports --globalize-symbols
172#
173# --globalize-symbols came out in 2.17, we must test the version
174# of objcopy, and if it is less than 2.17, then we can not
175# record local functions.
176sub check_objcopy
177{
178 open (IN, "$objcopy --version |") or die "error running $objcopy";
179 while (<IN>) {
180 if (/objcopy.*\s(\d+)\.(\d+)/) {
181 $can_use_local = 1 if ($1 > 2 || ($1 == 2 && $2 >= 17));
182 last;
183 }
184 }
185 close (IN);
186
Steven Rostedt638adb02009-11-17 10:48:25 -0500187 if (!$can_use_local && $print_warning) {
Li Hong7b7edc22009-10-28 13:04:21 +0800188 print STDERR "WARNING: could not find objcopy version or version " .
189 "is less than 2.17.\n" .
Steven Rostedt638adb02009-11-17 10:48:25 -0500190 "\tLocal function references are disabled.\n";
191 open (QUIET, ">$quiet_recordmcount");
192 printf QUIET "Disables the warning from recordmcount.pl\n";
193 close QUIET;
Li Hong7b7edc22009-10-28 13:04:21 +0800194 }
195}
Steven Rostedt8da38212008-08-14 15:45:07 -0400196
Steven Rostedtdce9d182008-10-23 09:32:57 -0400197if ($arch eq "x86") {
198 if ($bits == 64) {
199 $arch = "x86_64";
200 } else {
201 $arch = "i386";
202 }
203}
204
Steven Rostedtc204f722008-11-20 15:07:34 -0500205#
206# We base the defaults off of i386, the other archs may
207# feel free to change them in the below if statements.
208#
Li Hong306dcf42009-10-28 13:06:19 +0800209$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
210$weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
Steven Rostedtc204f722008-11-20 15:07:34 -0500211$section_regex = "Disassembly of section\\s+(\\S+):";
212$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
213$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
Jim Radforde58918a2008-11-20 19:48:39 -0800214$section_type = '@progbits';
Steven Rostedtc204f722008-11-20 15:07:34 -0500215$type = ".long";
216
Steven Rostedt8da38212008-08-14 15:45:07 -0400217if ($arch eq "x86_64") {
Steven Rostedt8da38212008-08-14 15:45:07 -0400218 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
219 $type = ".quad";
Matt Fleming7d5222a2008-11-07 13:26:25 +0000220 $alignment = 8;
Steven Rostedtd74fcd12008-08-15 11:40:24 -0400221
222 # force flags for this arch
223 $ld .= " -m elf_x86_64";
224 $objdump .= " -M x86-64";
225 $objcopy .= " -O elf64-x86-64";
226 $cc .= " -m64";
227
Steven Rostedt8da38212008-08-14 15:45:07 -0400228} elsif ($arch eq "i386") {
Matt Fleming7d5222a2008-11-07 13:26:25 +0000229 $alignment = 4;
Steven Rostedtd74fcd12008-08-15 11:40:24 -0400230
231 # force flags for this arch
232 $ld .= " -m elf_i386";
233 $objdump .= " -M i386";
234 $objcopy .= " -O elf32-i386";
235 $cc .= " -m32";
236
Heiko Carstensdfd9f7a2009-06-12 10:26:44 +0200237} elsif ($arch eq "s390" && $bits == 32) {
238 $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
239 $alignment = 4;
240 $ld .= " -m elf_s390";
241 $cc .= " -m31";
242
243} elsif ($arch eq "s390" && $bits == 64) {
244 $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
245 $alignment = 8;
246 $type = ".quad";
247 $ld .= " -m elf64_s390";
248 $cc .= " -m64";
249
Matt Fleming0da85c02008-11-12 20:11:47 +0900250} elsif ($arch eq "sh") {
Matt Fleming3a3d04a2008-11-20 21:49:52 +0000251 $alignment = 2;
Matt Fleming0da85c02008-11-12 20:11:47 +0900252
253 # force flags for this arch
254 $ld .= " -m shlelf_linux";
255 $objcopy .= " -O elf32-sh-linux";
256 $cc .= " -m32";
257
Steven Rostedt42e007d2008-11-20 07:16:16 -0800258} elsif ($arch eq "powerpc") {
Li Hong306dcf42009-10-28 13:06:19 +0800259 $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800260 $function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?.*?)>:";
261 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
Steven Rostedtc204f722008-11-20 15:07:34 -0500262
Steven Rostedt42e007d2008-11-20 07:16:16 -0800263 if ($bits == 64) {
264 $type = ".quad";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800265 }
266
Jim Radforde58918a2008-11-20 19:48:39 -0800267} elsif ($arch eq "arm") {
268 $alignment = 2;
269 $section_type = '%progbits';
270
Shaohua Li418071e2009-01-09 11:29:44 +0800271} elsif ($arch eq "ia64") {
272 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
273 $type = "data8";
274
275 if ($is_module eq "0") {
276 $cc .= " -mconstant-gp";
277 }
David S. Miller9be12f92009-06-13 01:03:24 -0700278} elsif ($arch eq "sparc64") {
279 # In the objdump output there are giblets like:
280 # 0000000000000000 <igmp_net_exit-0x18>:
281 # As there's some data blobs that get emitted into the
282 # text section before the first instructions and the first
283 # real symbols. We don't want to match that, so to combat
284 # this we use '\w' so we'll match just plain symbol names,
285 # and not those that also include hex offsets inside of the
286 # '<>' brackets. Actually the generic function_regex setting
287 # could safely use this too.
288 $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
289
290 # Sparc64 calls '_mcount' instead of plain 'mcount'.
291 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
292
293 $alignment = 8;
294 $type = ".xword";
295 $ld .= " -m elf64_sparc";
296 $cc .= " -m64";
297 $objcopy .= " -O elf64-sparc";
Steven Rostedt8da38212008-08-14 15:45:07 -0400298} else {
299 die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
300}
301
302my $text_found = 0;
303my $read_function = 0;
304my $opened = 0;
Steven Rostedt8da38212008-08-14 15:45:07 -0400305my $mcount_section = "__mcount_loc";
306
307my $dirname;
308my $filename;
309my $prefix;
310my $ext;
311
312if ($inputfile =~ m,^(.*)/([^/]*)$,) {
313 $dirname = $1;
314 $filename = $2;
315} else {
316 $dirname = ".";
317 $filename = $inputfile;
318}
319
320if ($filename =~ m,^(.*)(\.\S),) {
321 $prefix = $1;
322 $ext = $2;
323} else {
324 $prefix = $filename;
325 $ext = "";
326}
327
328my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
329my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
330
Li Hong7b7edc22009-10-28 13:04:21 +0800331check_objcopy();
Steven Rostedtf2f84582008-08-25 14:52:11 -0400332
Steven Rostedtf2f84582008-08-25 14:52:11 -0400333#
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400334# Step 1: find all the local (static functions) and weak symbols.
Li Hong306dcf42009-10-28 13:06:19 +0800335# 't' is local, 'w/W' is weak
Steven Rostedt8da38212008-08-14 15:45:07 -0400336#
337open (IN, "$nm $inputfile|") || die "error running $nm";
338while (<IN>) {
Li Hong306dcf42009-10-28 13:06:19 +0800339 if (/$local_regex/) {
Steven Rostedt8da38212008-08-14 15:45:07 -0400340 $locals{$1} = 1;
Li Hong306dcf42009-10-28 13:06:19 +0800341 } elsif (/$weak_regex/) {
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400342 $weak{$2} = $1;
Steven Rostedt8da38212008-08-14 15:45:07 -0400343 }
344}
345close(IN);
346
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400347my @offsets; # Array of offsets of mcount callers
348my $ref_func; # reference function to use for offsets
349my $offset = 0; # offset of ref_func to section beginning
350
351##
352# update_funcs - print out the current mcount callers
353#
354# Go through the list of offsets to callers and write them to
355# the output file in a format that can be read by an assembler.
356#
357sub update_funcs
358{
Li Hong60928582009-10-28 13:07:03 +0800359 return unless ($ref_func and @offsets);
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400360
Li Hongc4b8ac22009-10-28 13:07:43 +0800361 # Sanity check on weak function. A weak function may be overwritten by
362 # another function of the same name, making all these offsets incorrect.
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400363 if (defined $weak{$ref_func}) {
Li Hongc4b8ac22009-10-28 13:07:43 +0800364 die "$inputfile: ERROR: referencing weak function" .
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400365 " $ref_func for mcount\n";
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400366 }
367
368 # is this function static? If so, note this fact.
369 if (defined $locals{$ref_func}) {
Steven Rostedtf2f84582008-08-25 14:52:11 -0400370
371 # only use locals if objcopy supports globalize-symbols
Li Hong7b7edc22009-10-28 13:04:21 +0800372 if (!$can_use_local) {
Steven Rostedtf2f84582008-08-25 14:52:11 -0400373 return;
374 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400375 $convert{$ref_func} = 1;
376 }
377
378 # Loop through all the mcount caller offsets and print a reference
379 # to the caller based from the ref_func.
380 for (my $i=0; $i <= $#offsets; $i++) {
381 if (!$opened) {
382 open(FILE, ">$mcount_s") || die "can't create $mcount_s\n";
383 $opened = 1;
Jim Radforde58918a2008-11-20 19:48:39 -0800384 print FILE "\t.section $mcount_section,\"a\",$section_type\n";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800385 print FILE "\t.align $alignment\n" if (defined($alignment));
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400386 }
387 printf FILE "\t%s %s + %d\n", $type, $ref_func, $offsets[$i] - $offset;
388 }
389}
390
Steven Rostedt8da38212008-08-14 15:45:07 -0400391#
392# Step 2: find the sections and mcount call sites
393#
Steven Rostedtb43f7092009-01-16 23:18:31 -0500394open(IN, "$objdump -hdr $inputfile|") || die "error running $objdump";
Steven Rostedt8da38212008-08-14 15:45:07 -0400395
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400396my $text;
397
Li Hongdb24c7d2009-10-28 13:05:23 +0800398
399# read headers first
Steven Rostedtb43f7092009-01-16 23:18:31 -0500400my $read_headers = 1;
401
Steven Rostedt8da38212008-08-14 15:45:07 -0400402while (<IN>) {
Li Hongdb24c7d2009-10-28 13:05:23 +0800403
404 if ($read_headers && /$mcount_section/) {
405 #
406 # Somehow the make process can execute this script on an
407 # object twice. If it does, we would duplicate the mcount
408 # section and it will cause the function tracer self test
409 # to fail. Check if the mcount section exists, and if it does,
410 # warn and exit.
411 #
412 print STDERR "ERROR: $mcount_section already in $inputfile\n" .
413 "\tThis may be an indication that your build is corrupted.\n" .
414 "\tDelete $inputfile and try again. If the same object file\n" .
415 "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
416 exit(-1);
417 }
418
Steven Rostedt8da38212008-08-14 15:45:07 -0400419 # is it a section?
420 if (/$section_regex/) {
Steven Rostedtb43f7092009-01-16 23:18:31 -0500421 $read_headers = 0;
Steven Rostedt34698bc2008-10-23 09:32:58 -0400422
423 # Only record text sections that we know are safe
424 if (defined($text_sections{$1})) {
425 $read_function = 1;
426 } else {
427 $read_function = 0;
428 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400429 # print out any recorded offsets
Li Hong60928582009-10-28 13:07:03 +0800430 update_funcs();
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400431
432 # reset all markers and arrays
Steven Rostedt8da38212008-08-14 15:45:07 -0400433 $text_found = 0;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400434 undef($ref_func);
435 undef(@offsets);
436
Steven Rostedt8da38212008-08-14 15:45:07 -0400437 # section found, now is this a start of a function?
438 } elsif ($read_function && /$function_regex/) {
Steven Rostedt8da38212008-08-14 15:45:07 -0400439 $text_found = 1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400440 $text = $2;
441
442 # if this is either a local function or a weak function
443 # keep looking for functions that are global that
444 # we can use safely.
445 if (!defined($locals{$text}) && !defined($weak{$text})) {
446 $ref_func = $text;
447 $read_function = 0;
Matt Flemingbd171d52009-07-23 17:16:15 +0100448 $offset = hex $1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400449 } else {
450 # if we already have a function, and this is weak, skip it
Steven Rostedt3f6e9682009-08-05 22:00:14 -0400451 if (!defined($ref_func) && !defined($weak{$text}) &&
452 # PPC64 can have symbols that start with .L and
453 # gcc considers these special. Don't use them!
454 $text !~ /^\.L/) {
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400455 $ref_func = $text;
Matt Flemingbd171d52009-07-23 17:16:15 +0100456 $offset = hex $1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400457 }
Steven Rostedt8da38212008-08-14 15:45:07 -0400458 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400459 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400460 # is this a call site to mcount? If so, record it to print later
461 if ($text_found && /$mcount_regex/) {
462 $offsets[$#offsets + 1] = hex $1;
Steven Rostedt8da38212008-08-14 15:45:07 -0400463 }
464}
465
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400466# dump out anymore offsets that may have been found
Li Hong60928582009-10-28 13:07:03 +0800467update_funcs();
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400468
Steven Rostedt8da38212008-08-14 15:45:07 -0400469# If we did not find any mcount callers, we are done (do nothing).
470if (!$opened) {
471 exit(0);
472}
473
474close(FILE);
475
476#
477# Step 3: Compile the file that holds the list of call sites to mcount.
478#
479`$cc -o $mcount_o -c $mcount_s`;
480
481my @converts = keys %convert;
482
483#
484# Step 4: Do we have sections that started with local functions?
485#
486if ($#converts >= 0) {
487 my $globallist = "";
488 my $locallist = "";
489
490 foreach my $con (@converts) {
491 $globallist .= " --globalize-symbol $con";
492 $locallist .= " --localize-symbol $con";
493 }
494
495 my $globalobj = $dirname . "/.tmp_gl_" . $filename;
496 my $globalmix = $dirname . "/.tmp_mx_" . $filename;
497
498 #
499 # Step 5: set up each local function as a global
500 #
501 `$objcopy $globallist $inputfile $globalobj`;
502
503 #
504 # Step 6: Link the global version to our list.
505 #
506 `$ld -r $globalobj $mcount_o -o $globalmix`;
507
508 #
509 # Step 7: Convert the local functions back into local symbols
510 #
511 `$objcopy $locallist $globalmix $inputfile`;
512
513 # Remove the temp files
514 `$rm $globalobj $globalmix`;
515
516} else {
517
518 my $mix = $dirname . "/.tmp_mx_" . $filename;
519
520 #
521 # Step 8: Link the object with our list of call sites object.
522 #
523 `$ld -r $inputfile $mcount_o -o $mix`;
524
525 #
526 # Step 9: Move the result back to the original object.
527 #
528 `$mv $mix $inputfile`;
529}
530
531# Clean up the temp files
532`$rm $mcount_o $mcount_s`;
533
534exit(0);