blob: 1875740fe27cb030cdc71db2772adfbd5cc2e788 [file] [log] [blame]
Kevin Hilman7c6337e2007-04-30 19:37:19 +01001/*
2 * TI DaVinci serial driver
3 *
4 * Copyright (C) 2006 Texas Instruments.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 *
20 */
21
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/serial_8250.h>
25#include <linux/serial_reg.h>
26#include <linux/platform_device.h>
27#include <linux/delay.h>
28#include <linux/clk.h>
Russell Kingfced80c2008-09-06 12:10:45 +010029#include <linux/io.h>
Kevin Hilman7c6337e2007-04-30 19:37:19 +010030
Russell Kinga09e64f2008-08-05 16:14:15 +010031#include <mach/serial.h>
Kevin Hilman617b9252009-04-14 08:04:26 -050032#include <mach/cputype.h>
Kevin Hilman7c6337e2007-04-30 19:37:19 +010033
Kevin Hilman617b9252009-04-14 08:04:26 -050034static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
35 int offset)
Kevin Hilman7c6337e2007-04-30 19:37:19 +010036{
37 offset <<= up->regshift;
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -040038
39 WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset);
40
41 return (unsigned int)__raw_readl(up->membase + offset);
Kevin Hilman7c6337e2007-04-30 19:37:19 +010042}
43
Kevin Hilman617b9252009-04-14 08:04:26 -050044static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
45 int value)
Kevin Hilman7c6337e2007-04-30 19:37:19 +010046{
47 offset <<= p->regshift;
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -040048
49 WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
50
51 __raw_writel(value, p->membase + offset);
Kevin Hilman7c6337e2007-04-30 19:37:19 +010052}
53
Kevin Hilman7c6337e2007-04-30 19:37:19 +010054static void __init davinci_serial_reset(struct plat_serial8250_port *p)
55{
Kevin Hilman7c6337e2007-04-30 19:37:19 +010056 unsigned int pwremu = 0;
57
Kevin Hilman617b9252009-04-14 08:04:26 -050058 serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
Kevin Hilman7c6337e2007-04-30 19:37:19 +010059
Kevin Hilman617b9252009-04-14 08:04:26 -050060 /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
61 serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
Kevin Hilman7c6337e2007-04-30 19:37:19 +010062 mdelay(10);
63
64 pwremu |= (0x3 << 13);
65 pwremu |= 0x1;
Kevin Hilman617b9252009-04-14 08:04:26 -050066 serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
67
68 if (cpu_is_davinci_dm646x())
69 serial_write_reg(p, UART_DM646X_SCR,
70 UART_DM646X_SCR_TX_WATERMARK);
71}
72
Mark A. Greer65e866a2009-03-18 12:36:08 -050073int __init davinci_serial_init(struct davinci_uart_config *info)
Kevin Hilman617b9252009-04-14 08:04:26 -050074{
75 int i;
76 char name[16];
77 struct clk *uart_clk;
Mark A. Greer65e866a2009-03-18 12:36:08 -050078 struct davinci_soc_info *soc_info = &davinci_soc_info;
79 struct device *dev = &soc_info->serial_dev->dev;
80 struct plat_serial8250_port *p = dev->platform_data;
Kevin Hilman617b9252009-04-14 08:04:26 -050081
82 /*
83 * Make sure the serial ports are muxed on at this point.
Mark A. Greer65e866a2009-03-18 12:36:08 -050084 * You have to mux them off in device drivers later on if not needed.
Kevin Hilman617b9252009-04-14 08:04:26 -050085 */
Cyril Chemparathyda0122c2010-05-02 14:28:12 -040086 for (i = 0; p->flags; i++, p++) {
Mark A. Greer65e866a2009-03-18 12:36:08 -050087 if (!(info->enabled_uarts & (1 << i)))
Kevin Hilman617b9252009-04-14 08:04:26 -050088 continue;
Kevin Hilman617b9252009-04-14 08:04:26 -050089
90 sprintf(name, "uart%d", i);
91 uart_clk = clk_get(dev, name);
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -040092 if (IS_ERR(uart_clk)) {
Kevin Hilman617b9252009-04-14 08:04:26 -050093 printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
94 __func__, __LINE__, i);
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -040095 continue;
Kevin Hilman617b9252009-04-14 08:04:26 -050096 }
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -040097
98 clk_enable(uart_clk);
99 p->uartclk = clk_get_rate(uart_clk);
100
101 if (!p->membase && p->mapbase) {
102 p->membase = ioremap(p->mapbase, SZ_4K);
103
104 if (p->membase)
105 p->flags &= ~UPF_IOREMAP;
106 else
107 pr_err("uart regs ioremap failed\n");
108 }
109
Cyril Chemparathye2800002010-05-02 14:28:14 -0400110 if (p->membase && p->type != PORT_AR7)
Cyril Chemparathy9ee1ace2010-05-02 14:28:13 -0400111 davinci_serial_reset(p);
Kevin Hilman617b9252009-04-14 08:04:26 -0500112 }
Kevin Hilman7c6337e2007-04-30 19:37:19 +0100113
Mark A. Greer65e866a2009-03-18 12:36:08 -0500114 return platform_device_register(soc_info->serial_dev);
Kevin Hilman7c6337e2007-04-30 19:37:19 +0100115}