Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Hardware definitions for Palm Zire72 |
| 3 | * |
| 4 | * Authors: |
| 5 | * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com> |
| 6 | * Sergey Lapin <slapin@ossfans.org> |
| 7 | * Alex Osborne <bobofdoom@gmail.com> |
| 8 | * Jan Herman <2hp@seznam.cz> |
| 9 | * |
| 10 | * Rewrite for mainline: |
| 11 | * Marek Vasut <marek.vasut@gmail.com> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify |
| 14 | * it under the terms of the GNU General Public License version 2 as |
| 15 | * published by the Free Software Foundation. |
| 16 | * |
| 17 | * (find more info at www.hackndev.com) |
| 18 | * |
| 19 | */ |
| 20 | |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/sysdev.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/irq.h> |
| 25 | #include <linux/gpio_keys.h> |
| 26 | #include <linux/input.h> |
| 27 | #include <linux/pda_power.h> |
| 28 | #include <linux/pwm_backlight.h> |
| 29 | #include <linux/gpio.h> |
Marek Vasut | 241cf47 | 2010-06-04 03:07:33 +0200 | [diff] [blame] | 30 | #include <linux/wm97xx.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 31 | #include <linux/power_supply.h> |
Marek Vasut | eb73e62 | 2009-06-01 22:34:14 +0200 | [diff] [blame] | 32 | #include <linux/usb/gpio_vbus.h> |
Marek Vasut | 54a93b6 | 2011-01-13 11:45:30 +0100 | [diff] [blame] | 33 | #include <linux/i2c-gpio.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 34 | |
| 35 | #include <asm/mach-types.h> |
| 36 | #include <asm/mach/arch.h> |
| 37 | #include <asm/mach/map.h> |
| 38 | |
Eric Miao | 51c6298 | 2009-01-02 23:17:22 +0800 | [diff] [blame] | 39 | #include <mach/pxa27x.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 40 | #include <mach/audio.h> |
| 41 | #include <mach/palmz72.h> |
| 42 | #include <mach/mmc.h> |
| 43 | #include <mach/pxafb.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 44 | #include <mach/irda.h> |
Mark F. Brown | 4a2490e | 2010-09-03 18:28:06 -0400 | [diff] [blame] | 45 | #include <plat/pxa27x_keypad.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 46 | #include <mach/udc.h> |
Marek Vasut | eb73e62 | 2009-06-01 22:34:14 +0200 | [diff] [blame] | 47 | #include <mach/palmasoc.h> |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 48 | #include <mach/palm27x.h> |
Marek Vasut | eb73e62 | 2009-06-01 22:34:14 +0200 | [diff] [blame] | 49 | |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 50 | #include <mach/pm.h> |
Marek Vasut | 54a93b6 | 2011-01-13 11:45:30 +0100 | [diff] [blame] | 51 | #include <mach/camera.h> |
| 52 | |
| 53 | #include <media/soc_camera.h> |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 54 | |
| 55 | #include "generic.h" |
| 56 | #include "devices.h" |
| 57 | |
| 58 | /****************************************************************************** |
| 59 | * Pin configuration |
| 60 | ******************************************************************************/ |
| 61 | static unsigned long palmz72_pin_config[] __initdata = { |
| 62 | /* MMC */ |
| 63 | GPIO32_MMC_CLK, |
| 64 | GPIO92_MMC_DAT_0, |
| 65 | GPIO109_MMC_DAT_1, |
| 66 | GPIO110_MMC_DAT_2, |
| 67 | GPIO111_MMC_DAT_3, |
| 68 | GPIO112_MMC_CMD, |
| 69 | GPIO14_GPIO, /* SD detect */ |
| 70 | GPIO115_GPIO, /* SD RO */ |
| 71 | GPIO98_GPIO, /* SD power */ |
| 72 | |
| 73 | /* AC97 */ |
| 74 | GPIO28_AC97_BITCLK, |
| 75 | GPIO29_AC97_SDATA_IN_0, |
| 76 | GPIO30_AC97_SDATA_OUT, |
| 77 | GPIO31_AC97_SYNC, |
Marek Vasut | eb73e62 | 2009-06-01 22:34:14 +0200 | [diff] [blame] | 78 | GPIO89_AC97_SYSCLK, |
| 79 | GPIO113_AC97_nRESET, |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 80 | |
| 81 | /* IrDA */ |
| 82 | GPIO49_GPIO, /* ir disable */ |
| 83 | GPIO46_FICP_RXD, |
| 84 | GPIO47_FICP_TXD, |
| 85 | |
| 86 | /* PWM */ |
| 87 | GPIO16_PWM0_OUT, |
| 88 | |
| 89 | /* USB */ |
| 90 | GPIO15_GPIO, /* usb detect */ |
Marek Vasut | eb73e62 | 2009-06-01 22:34:14 +0200 | [diff] [blame] | 91 | GPIO95_GPIO, /* usb pullup */ |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 92 | |
| 93 | /* Matrix keypad */ |
| 94 | GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, |
| 95 | GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, |
| 96 | GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, |
| 97 | GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, |
| 98 | GPIO103_KP_MKOUT_0, |
| 99 | GPIO104_KP_MKOUT_1, |
| 100 | GPIO105_KP_MKOUT_2, |
| 101 | |
| 102 | /* LCD */ |
Eric Miao | bedbda9 | 2010-01-04 11:37:14 +0800 | [diff] [blame] | 103 | GPIOxx_LCD_TFT_16BPP, |
| 104 | |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 105 | GPIO20_GPIO, /* bl power */ |
| 106 | GPIO21_GPIO, /* LCD border switch */ |
| 107 | GPIO22_GPIO, /* LCD border color */ |
| 108 | GPIO96_GPIO, /* lcd power */ |
| 109 | |
Marek Vasut | 54a93b6 | 2011-01-13 11:45:30 +0100 | [diff] [blame] | 110 | /* PXA Camera */ |
| 111 | GPIO81_CIF_DD_0, |
| 112 | GPIO48_CIF_DD_5, |
| 113 | GPIO50_CIF_DD_3, |
| 114 | GPIO51_CIF_DD_2, |
| 115 | GPIO52_CIF_DD_4, |
| 116 | GPIO53_CIF_MCLK, |
| 117 | GPIO54_CIF_PCLK, |
| 118 | GPIO55_CIF_DD_1, |
| 119 | GPIO84_CIF_FV, |
| 120 | GPIO85_CIF_LV, |
| 121 | GPIO93_CIF_DD_6, |
| 122 | GPIO108_CIF_DD_7, |
| 123 | |
| 124 | GPIO56_GPIO, /* OV9640 Powerdown */ |
| 125 | GPIO57_GPIO, /* OV9640 Reset */ |
| 126 | GPIO91_GPIO, /* OV9640 Power */ |
| 127 | |
| 128 | /* I2C */ |
| 129 | GPIO117_GPIO, /* I2C_SCL */ |
| 130 | GPIO118_GPIO, /* I2C_SDA */ |
| 131 | |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 132 | /* Misc. */ |
| 133 | GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ |
| 134 | GPIO88_GPIO, /* green led */ |
| 135 | GPIO27_GPIO, /* WM9712 IRQ */ |
| 136 | }; |
| 137 | |
| 138 | /****************************************************************************** |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 139 | * GPIO keyboard |
| 140 | ******************************************************************************/ |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 141 | #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 142 | static unsigned int palmz72_matrix_keys[] = { |
| 143 | KEY(0, 0, KEY_POWER), |
| 144 | KEY(0, 1, KEY_F1), |
| 145 | KEY(0, 2, KEY_ENTER), |
| 146 | |
| 147 | KEY(1, 0, KEY_F2), |
| 148 | KEY(1, 1, KEY_F3), |
| 149 | KEY(1, 2, KEY_F4), |
| 150 | |
| 151 | KEY(2, 0, KEY_UP), |
| 152 | KEY(2, 2, KEY_DOWN), |
| 153 | |
| 154 | KEY(3, 0, KEY_RIGHT), |
| 155 | KEY(3, 2, KEY_LEFT), |
| 156 | }; |
| 157 | |
| 158 | static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = { |
| 159 | .matrix_key_rows = 4, |
| 160 | .matrix_key_cols = 3, |
| 161 | .matrix_key_map = palmz72_matrix_keys, |
| 162 | .matrix_key_map_size = ARRAY_SIZE(palmz72_matrix_keys), |
| 163 | |
| 164 | .debounce_interval = 30, |
| 165 | }; |
| 166 | |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 167 | static void __init palmz72_kpc_init(void) |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 168 | { |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 169 | pxa_set_keypad_info(&palmz72_keypad_platform_data); |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 170 | } |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 171 | #else |
| 172 | static inline void palmz72_kpc_init(void) {} |
| 173 | #endif |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 174 | |
| 175 | /****************************************************************************** |
| 176 | * LEDs |
| 177 | ******************************************************************************/ |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 178 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 179 | static struct gpio_led gpio_leds[] = { |
| 180 | { |
| 181 | .name = "palmz72:green:led", |
| 182 | .default_trigger = "none", |
| 183 | .gpio = GPIO_NR_PALMZ72_LED_GREEN, |
| 184 | }, |
| 185 | }; |
| 186 | |
| 187 | static struct gpio_led_platform_data gpio_led_info = { |
| 188 | .leds = gpio_leds, |
| 189 | .num_leds = ARRAY_SIZE(gpio_leds), |
| 190 | }; |
| 191 | |
| 192 | static struct platform_device palmz72_leds = { |
| 193 | .name = "leds-gpio", |
| 194 | .id = -1, |
| 195 | .dev = { |
| 196 | .platform_data = &gpio_led_info, |
| 197 | } |
| 198 | }; |
| 199 | |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 200 | static void __init palmz72_leds_init(void) |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 201 | { |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 202 | platform_device_register(&palmz72_leds); |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 203 | } |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 204 | #else |
| 205 | static inline void palmz72_leds_init(void) {} |
| 206 | #endif |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 207 | |
Sergey Lapin | fda50a1 | 2008-08-29 15:53:24 +0100 | [diff] [blame] | 208 | #ifdef CONFIG_PM |
| 209 | |
| 210 | /* We have some black magic here |
| 211 | * PalmOS ROM on recover expects special struct physical address |
| 212 | * to be transferred via PSPR. Using this struct PalmOS restores |
| 213 | * its state after sleep. As for Linux, we need to setup it the |
| 214 | * same way. More than that, PalmOS ROM changes some values in memory. |
| 215 | * For now only one location is found, which needs special treatment. |
| 216 | * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people |
| 217 | * for reading backtraces for me :) |
| 218 | */ |
| 219 | |
| 220 | #define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050) |
| 221 | |
| 222 | static struct palmz72_resume_info palmz72_resume_info = { |
| 223 | .magic0 = 0xb4e6, |
| 224 | .magic1 = 1, |
| 225 | |
| 226 | /* reset state, MMU off etc */ |
| 227 | .arm_control = 0, |
| 228 | .aux_control = 0, |
| 229 | .ttb = 0, |
| 230 | .domain_access = 0, |
| 231 | .process_id = 0, |
| 232 | }; |
| 233 | |
| 234 | static unsigned long store_ptr; |
| 235 | |
| 236 | /* sys_device for Palm Zire 72 PM */ |
| 237 | |
| 238 | static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) |
| 239 | { |
| 240 | /* setup the resume_info struct for the original bootloader */ |
Russell King | 4f5ad99 | 2011-02-06 17:41:26 +0000 | [diff] [blame] | 241 | palmz72_resume_info.resume_addr = (u32) cpu_resume; |
Sergey Lapin | fda50a1 | 2008-08-29 15:53:24 +0100 | [diff] [blame] | 242 | |
| 243 | /* Storing memory touched by ROM */ |
| 244 | store_ptr = *PALMZ72_SAVE_DWORD; |
| 245 | |
| 246 | /* Setting PSPR to a proper value */ |
| 247 | PSPR = virt_to_phys(&palmz72_resume_info); |
| 248 | |
| 249 | return 0; |
| 250 | } |
| 251 | |
| 252 | static int palmz72_pm_resume(struct sys_device *dev) |
| 253 | { |
| 254 | *PALMZ72_SAVE_DWORD = store_ptr; |
| 255 | return 0; |
| 256 | } |
| 257 | |
| 258 | static struct sysdev_class palmz72_pm_sysclass = { |
| 259 | .name = "palmz72_pm", |
| 260 | .suspend = palmz72_pm_suspend, |
| 261 | .resume = palmz72_pm_resume, |
| 262 | }; |
| 263 | |
| 264 | static struct sys_device palmz72_pm_device = { |
| 265 | .cls = &palmz72_pm_sysclass, |
| 266 | }; |
| 267 | |
| 268 | static int __init palmz72_pm_init(void) |
| 269 | { |
| 270 | int ret = -ENODEV; |
| 271 | if (machine_is_palmz72()) { |
| 272 | ret = sysdev_class_register(&palmz72_pm_sysclass); |
| 273 | if (ret == 0) |
| 274 | ret = sysdev_register(&palmz72_pm_device); |
| 275 | } |
| 276 | return ret; |
| 277 | } |
| 278 | |
| 279 | device_initcall(palmz72_pm_init); |
| 280 | #endif |
| 281 | |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 282 | /****************************************************************************** |
Marek Vasut | 54a93b6 | 2011-01-13 11:45:30 +0100 | [diff] [blame] | 283 | * SoC Camera |
| 284 | ******************************************************************************/ |
| 285 | #if defined(CONFIG_SOC_CAMERA_OV9640) || \ |
| 286 | defined(CONFIG_SOC_CAMERA_OV9640_MODULE) |
| 287 | static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { |
| 288 | .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | |
| 289 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, |
| 290 | .mclk_10khz = 2600, |
| 291 | }; |
| 292 | |
| 293 | /* Board I2C devices. */ |
| 294 | static struct i2c_board_info palmz72_i2c_device[] = { |
| 295 | { |
| 296 | I2C_BOARD_INFO("ov9640", 0x30), |
| 297 | } |
| 298 | }; |
| 299 | |
| 300 | static int palmz72_camera_power(struct device *dev, int power) |
| 301 | { |
| 302 | gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); |
| 303 | mdelay(50); |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | static int palmz72_camera_reset(struct device *dev) |
| 308 | { |
| 309 | gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); |
| 310 | mdelay(50); |
| 311 | gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); |
| 312 | mdelay(50); |
| 313 | return 0; |
| 314 | } |
| 315 | |
| 316 | static struct soc_camera_link palmz72_iclink = { |
| 317 | .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ |
| 318 | .board_info = &palmz72_i2c_device[0], |
| 319 | .i2c_adapter_id = 0, |
| 320 | .module_name = "ov96xx", |
| 321 | .power = &palmz72_camera_power, |
| 322 | .reset = &palmz72_camera_reset, |
| 323 | .flags = SOCAM_DATAWIDTH_8, |
| 324 | }; |
| 325 | |
| 326 | static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { |
| 327 | .sda_pin = 118, |
| 328 | .scl_pin = 117, |
| 329 | .udelay = 10, |
| 330 | .timeout = 100, |
| 331 | }; |
| 332 | |
| 333 | static struct platform_device palmz72_i2c_bus_device = { |
| 334 | .name = "i2c-gpio", |
| 335 | .id = 0, /* we use this as a replacement for i2c-pxa */ |
| 336 | .dev = { |
| 337 | .platform_data = &palmz72_i2c_bus_data, |
| 338 | } |
| 339 | }; |
| 340 | |
| 341 | static struct platform_device palmz72_camera = { |
| 342 | .name = "soc-camera-pdrv", |
| 343 | .id = -1, |
| 344 | .dev = { |
| 345 | .platform_data = &palmz72_iclink, |
| 346 | }, |
| 347 | }; |
| 348 | |
| 349 | /* Here we request the camera GPIOs and configure them. We power up the camera |
| 350 | * module, deassert the reset pin, but put it into powerdown (low to no power |
| 351 | * consumption) mode. This allows us to later bring the module up fast. */ |
| 352 | static struct gpio palmz72_camera_gpios[] = { |
| 353 | { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, |
| 354 | { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, |
| 355 | { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, |
| 356 | }; |
| 357 | |
| 358 | static inline void __init palmz72_cam_gpio_init(void) |
| 359 | { |
| 360 | int ret; |
| 361 | |
| 362 | ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); |
| 363 | if (!ret) |
| 364 | gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); |
| 365 | else |
| 366 | printk(KERN_ERR "Camera GPIO init failed!\n"); |
| 367 | |
| 368 | return; |
| 369 | } |
| 370 | |
| 371 | static void __init palmz72_camera_init(void) |
| 372 | { |
| 373 | palmz72_cam_gpio_init(); |
| 374 | pxa_set_camera_info(&palmz72_pxacamera_platform_data); |
| 375 | platform_device_register(&palmz72_i2c_bus_device); |
| 376 | platform_device_register(&palmz72_camera); |
| 377 | } |
| 378 | #else |
| 379 | static inline void palmz72_camera_init(void) {} |
| 380 | #endif |
| 381 | |
| 382 | /****************************************************************************** |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 383 | * Machine init |
| 384 | ******************************************************************************/ |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 385 | static void __init palmz72_init(void) |
| 386 | { |
| 387 | pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config)); |
Russell King | cc155c6 | 2009-11-09 13:34:08 +0800 | [diff] [blame] | 388 | pxa_set_ffuart_info(NULL); |
| 389 | pxa_set_btuart_info(NULL); |
| 390 | pxa_set_stuart_info(NULL); |
| 391 | |
Marek Vasut | 31620e2 | 2010-07-13 08:16:45 +0200 | [diff] [blame] | 392 | palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO, |
| 393 | GPIO_NR_PALMZ72_SD_POWER_N, 1); |
| 394 | palm27x_lcd_init(-1, &palm_320x320_lcd_mode); |
| 395 | palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N, |
| 396 | GPIO_NR_PALMZ72_USB_PULLUP, 0); |
| 397 | palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE); |
| 398 | palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE, |
| 399 | -1, 113); |
| 400 | palm27x_pwm_init(-1, -1); |
| 401 | palm27x_power_init(-1, -1); |
| 402 | palm27x_pmic_init(); |
| 403 | palmz72_kpc_init(); |
| 404 | palmz72_leds_init(); |
Marek Vasut | 54a93b6 | 2011-01-13 11:45:30 +0100 | [diff] [blame] | 405 | palmz72_camera_init(); |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 406 | } |
| 407 | |
| 408 | MACHINE_START(PALMZ72, "Palm Zire72") |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 409 | .boot_params = 0xa0000100, |
Marek Vasut | 851982c | 2010-10-11 02:20:19 +0200 | [diff] [blame] | 410 | .map_io = pxa27x_map_io, |
Sergey Lapin | c49e1e6 | 2008-08-29 15:47:52 +0100 | [diff] [blame] | 411 | .init_irq = pxa27x_init_irq, |
| 412 | .timer = &pxa_timer, |
| 413 | .init_machine = palmz72_init |
| 414 | MACHINE_END |