blob: c7f06298bd3c09242abd800cebb1b2b7dfb3f104 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "SCSI device support"
2
James Bottomley61a7afa2005-08-16 18:27:34 -05003config RAID_ATTRS
4 tristate "RAID Transport Class"
5 default n
David Howells93614012006-09-30 20:45:40 +02006 depends on BLOCK
James Bottomley61a7afa2005-08-16 18:27:34 -05007 ---help---
8 Provides RAID
9
Linus Torvalds1da177e2005-04-16 15:20:36 -070010config SCSI
11 tristate "SCSI device support"
David Howells93614012006-09-30 20:45:40 +020012 depends on BLOCK
Cornelia Huck7689e822007-07-09 11:59:59 -070013 select SCSI_DMA if HAS_DMA
Linus Torvalds1da177e2005-04-16 15:20:36 -070014 ---help---
15 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
16 any other SCSI device under Linux, say Y and make sure that you know
17 the name of your SCSI host adapter (the card inside your computer
18 that "speaks" the SCSI protocol, also called SCSI controller),
19 because you will be asked for it.
20
21 You also need to say Y here if you have a device which speaks
22 the SCSI protocol. Examples of this include the parallel port
23 version of the IOMEGA ZIP drive, USB storage devices, Fibre
24 Channel, FireWire storage and the IDE-SCSI emulation driver.
25
26 To compile this driver as a module, choose M here and read
27 <file:Documentation/scsi/scsi.txt>.
28 The module will be called scsi_mod.
29
30 However, do not compile this as a module if your root file system
31 (the one containing the directory /) is located on a SCSI device.
32
Cornelia Huck7689e822007-07-09 11:59:59 -070033config SCSI_DMA
34 bool
35 default n
36
FUJITA Tomonori0d2db302006-11-16 19:24:18 +090037config SCSI_TGT
38 tristate "SCSI target support"
39 depends on SCSI && EXPERIMENTAL
40 ---help---
41 If you want to use SCSI target mode drivers enable this option.
42 If you choose M, the module will be called scsi_tgt.
43
James Smart84314fd2006-08-18 17:30:09 -040044config SCSI_NETLINK
James Bottomley2b7cbe22006-09-07 15:14:46 -050045 bool
James Smart84314fd2006-08-18 17:30:09 -040046 default n
47 select NET
48
Linus Torvalds1da177e2005-04-16 15:20:36 -070049config SCSI_PROC_FS
50 bool "legacy /proc/scsi/ support"
51 depends on SCSI && PROC_FS
52 default y
53 ---help---
54 This option enables support for the various files in
Matt LaPlante09509602006-10-03 22:31:37 +020055 /proc/scsi. In Linux 2.6 this has been superseded by
Linus Torvalds1da177e2005-04-16 15:20:36 -070056 files in sysfs but many legacy applications rely on this.
57
Matt LaPlante09509602006-10-03 22:31:37 +020058 If unsure say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070059
60comment "SCSI support type (disk, tape, CD-ROM)"
61 depends on SCSI
62
63config BLK_DEV_SD
64 tristate "SCSI disk support"
65 depends on SCSI
Martin K. Petersenaf55ff62008-07-17 04:28:35 -040066 select CRC_T10DIF
Linus Torvalds1da177e2005-04-16 15:20:36 -070067 ---help---
68 If you want to use SCSI hard disks, Fibre Channel disks,
Randy Dunlapabcdceb2007-06-11 11:59:34 -070069 Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
Linus Torvalds1da177e2005-04-16 15:20:36 -070070 USB storage or the SCSI or parallel port version of
71 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
72 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
73 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
74 CD-ROMs.
75
76 To compile this driver as a module, choose M here and read
77 <file:Documentation/scsi/scsi.txt>.
78 The module will be called sd_mod.
79
80 Do not compile this driver as a module if your root file system
81 (the one containing the directory /) is located on a SCSI disk.
82 In this case, do not compile the driver for your SCSI host adapter
83 (below) as a module either.
84
85config CHR_DEV_ST
86 tristate "SCSI tape support"
87 depends on SCSI
88 ---help---
89 If you want to use a SCSI tape drive under Linux, say Y and read the
90 SCSI-HOWTO, available from
91 <http://www.tldp.org/docs.html#howto>, and
92 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
93 for SCSI CD-ROMs.
94
95 To compile this driver as a module, choose M here and read
96 <file:Documentation/scsi/scsi.txt>. The module will be called st.
97
98config CHR_DEV_OSST
99 tristate "SCSI OnStream SC-x0 tape support"
100 depends on SCSI
101 ---help---
Matt LaPlante84eb8d02006-10-03 22:53:09 +0200102 The OnStream SC-x0 SCSI tape drives cannot be driven by the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 standard st driver, but instead need this special osst driver and
104 use the /dev/osstX char device nodes (major 206). Via usb-storage
105 and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
106 as well. Note that there is also a second generation of OnStream
107 tape drives (ADR-x0) that supports the standard SCSI-2 commands for
108 tapes (QIC-157) and can be driven by the standard driver st.
109 For more information, you may have a look at the SCSI-HOWTO
110 <http://www.tldp.org/docs.html#howto> and
111 <file:Documentation/scsi/osst.txt> in the kernel source.
112 More info on the OnStream driver may be found on
113 <http://linux1.onstream.nl/test/>
114 Please also have a look at the standard st docu, as most of it
115 applies to osst as well.
116
117 To compile this driver as a module, choose M here and read
118 <file:Documentation/scsi/scsi.txt>. The module will be called osst.
119
120config BLK_DEV_SR
121 tristate "SCSI CDROM support"
122 depends on SCSI
123 ---help---
124 If you want to use a SCSI or FireWire CD-ROM under Linux,
125 say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
126 <http://www.tldp.org/docs.html#howto>. Also make sure to say
127 Y or M to "ISO 9660 CD-ROM file system support" later.
128
129 To compile this driver as a module, choose M here and read
130 <file:Documentation/scsi/scsi.txt>.
131 The module will be called sr_mod.
132
133config BLK_DEV_SR_VENDOR
134 bool "Enable vendor-specific extensions (for SCSI CDROM)"
135 depends on BLK_DEV_SR
136 help
137 This enables the usage of vendor specific SCSI commands. This is
138 required to support multisession CDs with old NEC/TOSHIBA cdrom
139 drives (and HP Writers). If you have such a drive and get the first
140 session only, try saying Y here; everybody else says N.
141
142config CHR_DEV_SG
143 tristate "SCSI generic support"
144 depends on SCSI
145 ---help---
146 If you want to use SCSI scanners, synthesizers or CD-writers or just
147 about anything having "SCSI" in its name other than hard disks,
148 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
149 directly, so you need some additional software which knows how to
150 talk to these devices using the SCSI protocol:
151
152 For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
153 writer software look at Cdrtools
154 (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
155 and for burning a "disk at once": CDRDAO
156 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
157 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
158 For other devices, it's possible that you'll have to write the
159 driver software yourself. Please read the file
160 <file:Documentation/scsi/scsi-generic.txt> for more information.
161
162 To compile this driver as a module, choose M here and read
163 <file:Documentation/scsi/scsi.txt>. The module will be called sg.
164
165 If unsure, say N.
166
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200167config CHR_DEV_SCH
168 tristate "SCSI media changer support"
169 depends on SCSI
170 ---help---
171 This is a driver for SCSI media changers. Most common devices are
172 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
173 don't need this for those tiny 6-slot cdrom changers. Media
174 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
175 If you have such hardware and want to use it with linux, say Y
Dirk Hohndele4031492007-10-30 13:37:19 -0700176 here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200177
178 If you want to compile this as a module ( = code which can be
179 inserted in and removed from the running kernel whenever you want),
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500180 say M here and read <file:Documentation/kbuild/modules.txt> and
Dirk Hohndele4031492007-10-30 13:37:19 -0700181 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200182 If unsure, say N.
James Bottomley9927c682008-02-03 15:48:56 -0600183
184config SCSI_ENCLOSURE
185 tristate "SCSI Enclosure Support"
186 depends on SCSI && ENCLOSURE_SERVICES
187 help
188 Enclosures are devices sitting on or in SCSI backplanes that
189 manage devices. If you have a disk cage, the chances are that
190 it has an enclosure device. Selecting this option will just allow
191 certain enclosure conditions to be reported and is not required.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200192
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
194 depends on SCSI
195
196config SCSI_MULTI_LUN
197 bool "Probe all LUNs on each SCSI device"
198 depends on SCSI
199 help
200 If you have a SCSI device that supports more than one LUN (Logical
201 Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
202 can say Y here to force the SCSI driver to probe for multiple LUNs.
203 A SCSI device with multiple LUNs acts logically like multiple SCSI
204 devices. The vast majority of SCSI devices have only one LUN, and
205 so most people can say N here. The max_luns boot/module parameter
206 allows to override this setting.
207
208config SCSI_CONSTANTS
209 bool "Verbose SCSI error reporting (kernel size +=12K)"
210 depends on SCSI
211 help
212 The error messages regarding your SCSI hardware will be easier to
213 understand if you say Y here; it will enlarge your kernel by about
214 12 KB. If in doubt, say Y.
215
216config SCSI_LOGGING
217 bool "SCSI logging facility"
218 depends on SCSI
219 ---help---
220 This turns on a logging facility that can be used to debug a number
221 of SCSI related problems.
222
223 If you say Y here, no logging output will appear by default, but you
224 can enable logging by saying Y to "/proc file system support" and
225 "Sysctl support" below and executing the command
226
227 echo "scsi log token [level]" > /proc/scsi/scsi
228
229 at boot time after the /proc file system has been mounted.
230
231 There are a number of things that can be used for 'token' (you can
232 find them in the source: <file:drivers/scsi/scsi.c>), and this
233 allows you to select the types of information you want, and the
234 level allows you to select the level of verbosity.
235
236 If you say N here, it may be harder to track down some types of SCSI
237 problems. If you say Y here your kernel will be somewhat larger, but
238 there should be no noticeable performance impact as long as you have
239 logging turned off.
240
Matthew Wilcox21db1882006-11-22 13:24:52 -0700241config SCSI_SCAN_ASYNC
242 bool "Asynchronous SCSI scanning"
243 depends on SCSI
244 help
245 The SCSI subsystem can probe for devices while the rest of the
246 system continues booting, and even probe devices on different
247 busses in parallel, leading to a significant speed-up.
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100248
Matthew Wilcox21db1882006-11-22 13:24:52 -0700249 If you have built SCSI as modules, enabling this option can
250 be a problem as the devices may not have been found by the
251 time your system expects them to have been. You can load the
252 scsi_wait_scan module to ensure that all scans have completed.
253 If you build your SCSI drivers into the kernel, then everything
254 will work fine if you say Y here.
255
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100256 You can override this choice by specifying "scsi_mod.scan=sync"
257 or async on the kernel's command line.
Matthew Wilcox21db1882006-11-22 13:24:52 -0700258
James Bottomley840c2832007-03-11 14:16:43 -0500259config SCSI_WAIT_SCAN
260 tristate
261 default m
262 depends on SCSI
263 depends on MODULES
264
James Bottomley2908d772006-08-29 09:22:51 -0500265menu "SCSI Transports"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 depends on SCSI
267
268config SCSI_SPI_ATTRS
269 tristate "Parallel SCSI (SPI) Transport Attributes"
270 depends on SCSI
271 help
272 If you wish to export transport-specific information about
273 each attached SCSI device to sysfs, say Y. Otherwise, say N.
274
275config SCSI_FC_ATTRS
276 tristate "FiberChannel Transport Attributes"
277 depends on SCSI
James Smart84314fd2006-08-18 17:30:09 -0400278 select SCSI_NETLINK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 help
280 If you wish to export transport-specific information about
281 each attached FiberChannel device to sysfs, say Y.
282 Otherwise, say N.
283
FUJITA Tomonori75252362007-09-01 02:02:27 +0900284config SCSI_FC_TGT_ATTRS
285 bool "SCSI target support for FiberChannel Transport Attributes"
286 depends on SCSI_FC_ATTRS
287 depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
288 help
289 If you want to use SCSI target mode drivers enable this option.
290
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291config SCSI_ISCSI_ATTRS
292 tristate "iSCSI Transport Attributes"
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700293 depends on SCSI && NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 help
295 If you wish to export transport-specific information about
296 each attached iSCSI device to sysfs, say Y.
297 Otherwise, say N.
298
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200299config SCSI_SAS_ATTRS
300 tristate "SAS Transport Attributes"
FUJITA Tomonori7aa68e82007-07-09 12:52:06 +0900301 depends on SCSI && BLK_DEV_BSG
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200302 help
303 If you wish to export transport-specific information about
304 each attached SAS device to sysfs, say Y.
305
James Bottomley2908d772006-08-29 09:22:51 -0500306source "drivers/scsi/libsas/Kconfig"
307
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900308config SCSI_SRP_ATTRS
309 tristate "SRP Transport Attributes"
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900310 depends on SCSI
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900311 help
312 If you wish to export transport-specific information about
313 each attached SRP device to sysfs, say Y.
314
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900315config SCSI_SRP_TGT_ATTRS
316 bool "SCSI target support for SRP Transport Attributes"
317 depends on SCSI_SRP_ATTRS
318 depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
319 help
320 If you want to use SCSI target mode drivers enable this option.
321
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322endmenu
323
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700324menuconfig SCSI_LOWLEVEL
325 bool "SCSI low-level drivers"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700326 depends on SCSI!=n
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700327 default y
328
James Bottomley67951f62008-03-06 15:32:06 -0600329if SCSI_LOWLEVEL && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700331config ISCSI_TCP
332 tristate "iSCSI Initiator over TCP/IP"
James Bottomley96bad872005-09-08 09:56:18 -0500333 depends on SCSI && INET
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700334 select CRYPTO
335 select CRYPTO_MD5
336 select CRYPTO_CRC32C
James Bottomley96bad872005-09-08 09:56:18 -0500337 select SCSI_ISCSI_ATTRS
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700338 help
339 The iSCSI Driver provides a host with the ability to access storage
340 through an IP network. The driver uses the iSCSI protocol to transport
341 SCSI requests and responses over a TCP/IP network between the host
342 (the "initiator") and "targets". Architecturally, the iSCSI driver
343 combines with the host's TCP/IP stack, network drivers, and Network
344 Interface Card (NIC) to provide the same functions as a SCSI or a
345 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
346
347 To compile this driver as a module, choose M here: the
348 module will be called iscsi_tcp.
349
350 The userspace component needed to initialize the driver, documentation,
351 and sample configuration files can be found here:
352
FUJITA Tomonoribca10882007-12-13 12:43:31 -0600353 http://open-iscsi.org
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700354
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355config SGIWD93_SCSI
356 tristate "SGI WD93C93 SCSI Driver"
Thomas Bogendoerfer2adbfa32008-01-27 00:25:53 +0100357 depends on SGI_HAS_WD93 && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 help
359 If you have a Western Digital WD93 SCSI controller on
360 an SGI MIPS system, say Y. Otherwise, say N.
361
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362config BLK_DEV_3W_XXXX_RAID
363 tristate "3ware 5/6/7/8xxx ATA-RAID support"
364 depends on PCI && SCSI
365 help
366 3ware is the only hardware ATA-Raid product in Linux to date.
367 This card is 2,4, or 8 channel master mode support only.
368 SCSI support required!!!
369
370 <http://www.3ware.com/>
371
372 Please read the comments at the top of
373 <file:drivers/scsi/3w-xxxx.c>.
374
375config SCSI_3W_9XXX
376 tristate "3ware 9xxx SATA-RAID support"
377 depends on PCI && SCSI
378 help
379 This driver supports the 9000 series 3ware SATA-RAID cards.
380
381 <http://www.amcc.com>
382
383 Please read the comments at the top of
384 <file:drivers/scsi/3w-9xxx.c>.
385
386config SCSI_7000FASST
387 tristate "7000FASST SCSI support"
Al Viroa5532602005-05-04 05:39:42 +0100388 depends on ISA && SCSI && ISA_DMA_API
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700389 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390 help
391 This driver supports the Western Digital 7000 SCSI host adapter
392 family. Some information is in the source:
393 <file:drivers/scsi/wd7000.c>.
394
395 To compile this driver as a module, choose M here: the
396 module will be called wd7000.
397
398config SCSI_ACARD
399 tristate "ACARD SCSI support"
400 depends on PCI && SCSI
401 help
402 This driver supports the ACARD SCSI host adapter.
403 Support Chip <ATP870 ATP876 ATP880 ATP885>
404 To compile this driver as a module, choose M here: the
405 module will be called atp870u.
406
407config SCSI_AHA152X
408 tristate "Adaptec AHA152X/2825 support"
409 depends on ISA && SCSI && !64BIT
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500410 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700411 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 ---help---
413 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
414 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
415 must be manually specified in this case.
416
417 It is explained in section 3.3 of the SCSI-HOWTO, available from
418 <http://www.tldp.org/docs.html#howto>. You might also want to
419 read the file <file:Documentation/scsi/aha152x.txt>.
420
421 To compile this driver as a module, choose M here: the
422 module will be called aha152x.
423
424config SCSI_AHA1542
425 tristate "Adaptec AHA1542 support"
Al Viroa5532602005-05-04 05:39:42 +0100426 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427 ---help---
428 This is support for a SCSI host adapter. It is explained in section
429 3.4 of the SCSI-HOWTO, available from
430 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
431 purchased by Adaptec, and some former Trantor products are being
432 sold under the Adaptec name. If it doesn't work out of the box, you
433 may have to change some settings in <file:drivers/scsi/aha1542.h>.
434
435 To compile this driver as a module, choose M here: the
436 module will be called aha1542.
437
438config SCSI_AHA1740
439 tristate "Adaptec AHA1740 support"
440 depends on EISA && SCSI
441 ---help---
442 This is support for a SCSI host adapter. It is explained in section
443 3.5 of the SCSI-HOWTO, available from
444 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
445 of the box, you may have to change some settings in
446 <file:drivers/scsi/aha1740.h>.
447
448 To compile this driver as a module, choose M here: the
449 module will be called aha1740.
450
451config SCSI_AACRAID
452 tristate "Adaptec AACRAID support"
453 depends on SCSI && PCI
Adrian Bunk8075f212006-03-20 20:21:24 +0100454 help
455 This driver supports a variety of Dell, HP, Adaptec, IBM and
456 ICP storage products. For a list of supported products, refer
457 to <file:Documentation/scsi/aacraid.txt>.
458
459 To compile this driver as a module, choose M here: the module
460 will be called aacraid.
461
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462
463source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
464
465config SCSI_AIC7XXX_OLD
466 tristate "Adaptec AIC7xxx support (old driver)"
467 depends on (ISA || EISA || PCI ) && SCSI
468 help
469 WARNING This driver is an older aic7xxx driver and is no longer
470 under active development. Adaptec, Inc. is writing a new driver to
471 take the place of this one, and it is recommended that whenever
472 possible, people should use the new Adaptec written driver instead
473 of this one. This driver will eventually be phased out entirely.
474
475 This is support for the various aic7xxx based Adaptec SCSI
476 controllers. These include the 274x EISA cards; 284x VLB cards;
477 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
478 motherboard based SCSI controllers from Adaptec. It does not support
479 the AAA-13x RAID controllers from Adaptec, nor will it likely ever
480 support them. It does not support the 2920 cards from Adaptec that
481 use the Future Domain SCSI controller chip. For those cards, you
482 need the "Future Domain 16xx SCSI support" driver.
483
484 In general, if the controller is based on an Adaptec SCSI controller
485 chip from the aic777x series or the aic78xx series, this driver
486 should work. The only exception is the 7810 which is specifically
487 not supported (that's the RAID controller chip on the AAA-13x
488 cards).
489
490 Note that the AHA2920 SCSI host adapter is *not* supported by this
491 driver; choose "Future Domain 16xx SCSI support" instead if you have
492 one of those.
493
494 Information on the configuration options for this controller can be
495 found by checking the help file for each of the available
496 configuration options. You should read
497 <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
498 contacting the maintainer with any questions. The SCSI-HOWTO,
499 available from <http://www.tldp.org/docs.html#howto>, can also
500 be of great help.
501
502 To compile this driver as a module, choose M here: the
503 module will be called aic7xxx_old.
504
505source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
James Bottomley2908d772006-08-29 09:22:51 -0500506source "drivers/scsi/aic94xx/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508config SCSI_DPT_I2O
509 tristate "Adaptec I2O RAID support "
Miquel van Smoorenburg62ac5ae2008-05-02 01:07:27 +0200510 depends on SCSI && PCI && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511 help
512 This driver supports all of Adaptec's I2O based RAID controllers as
513 well as the DPT SmartRaid V cards. This is an Adaptec maintained
514 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
515
516 To compile this driver as a module, choose M here: the
517 module will be called dpt_i2o.
518
519config SCSI_ADVANSYS
520 tristate "AdvanSys SCSI support"
Andrew Morton50899562007-10-18 23:39:10 -0700521 depends on SCSI && VIRT_TO_BUS
Linus Torvalds4661e3e2006-04-29 14:27:13 -0700522 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 help
524 This is a driver for all SCSI host adapters manufactured by
525 AdvanSys. It is documented in the kernel source in
526 <file:drivers/scsi/advansys.c>.
527
528 To compile this driver as a module, choose M here: the
529 module will be called advansys.
530
531config SCSI_IN2000
532 tristate "Always IN2000 SCSI support"
533 depends on ISA && SCSI
534 help
535 This is support for an ISA bus SCSI host adapter. You'll find more
536 information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
537 out of the box, you may have to change the jumpers for IRQ or
538 address selection.
539
540 To compile this driver as a module, choose M here: the
541 module will be called in2000.
542
Erich Chen1c57e862006-07-12 08:59:32 -0700543config SCSI_ARCMSR
Nick Cheng1a4f5502007-09-13 17:26:40 +0800544 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
Erich Chen1c57e862006-07-12 08:59:32 -0700545 depends on PCI && SCSI
546 help
Nick Cheng1a4f5502007-09-13 17:26:40 +0800547 This driver supports all of ARECA's SATA/SAS RAID controller cards.
Erich Chen1c57e862006-07-12 08:59:32 -0700548 This is an ARECA-maintained driver by Erich Chen.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800549 If you have any problems, please mail to: <erich@areca.com.tw>.
Erich Chen1c57e862006-07-12 08:59:32 -0700550 Areca supports Linux RAID config tools.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800551 Please link <http://www.areca.com.tw>
Erich Chen1c57e862006-07-12 08:59:32 -0700552
553 To compile this driver as a module, choose M here: the
554 module will be called arcmsr (modprobe arcmsr).
555
Nick Cheng1a4f5502007-09-13 17:26:40 +0800556config SCSI_ARCMSR_AER
557 bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
558 depends on SCSI_ARCMSR && PCIEAER
559 default n
560 help
561 The advanced error reporting(AER) capability is "NOT" provided by
562 ARC1200/1201/1202 SATA RAID controllers cards.
563 If your card is one of ARC1200/1201/1202, please use the default setting, n.
564 If your card is other models, you could pick it
565 on condition that the kernel version is greater than 2.6.19.
566 This function is maintained driver by Nick Cheng. If you have any
567 problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
568 To enable this function, choose Y here.
569
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570source "drivers/scsi/megaraid/Kconfig.megaraid"
571
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800572config SCSI_HPTIOP
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800573 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800574 depends on SCSI && PCI
575 help
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800576 This option enables support for HighPoint RocketRAID 3xxx/4xxx
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800577 controllers.
578
579 To compile this driver as a module, choose M here; the module
580 will be called hptiop. If unsure, say N.
581
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582config SCSI_BUSLOGIC
583 tristate "BusLogic SCSI support"
Stephen Rothwellf057eac2007-07-15 23:40:05 -0700584 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585 ---help---
586 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
587 Adapters. Consult the SCSI-HOWTO, available from
588 <http://www.tldp.org/docs.html#howto>, and the files
589 <file:Documentation/scsi/BusLogic.txt> and
590 <file:Documentation/scsi/FlashPoint.txt> for more information.
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600591 Note that support for FlashPoint is only available for 32-bit
592 x86 configurations.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700593
594 To compile this driver as a module, choose M here: the
595 module will be called BusLogic.
596
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600597config SCSI_FLASHPOINT
598 bool "FlashPoint support"
599 depends on SCSI_BUSLOGIC && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700600 help
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600601 This option allows you to add FlashPoint support to the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700602 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600603 substantial, so users of MultiMaster Host Adapters may not
604 wish to include it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700605
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606config SCSI_DMX3191D
607 tristate "DMX3191D SCSI support"
608 depends on PCI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500609 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610 help
611 This is support for Domex DMX3191D SCSI Host Adapters.
612
613 To compile this driver as a module, choose M here: the
614 module will be called dmx3191d.
615
616config SCSI_DTC3280
617 tristate "DTC3180/3280 SCSI support"
618 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500619 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700620 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700621 help
622 This is support for DTC 3180/3280 SCSI Host Adapters. Please read
623 the SCSI-HOWTO, available from
624 <http://www.tldp.org/docs.html#howto>, and the file
625 <file:Documentation/scsi/dtc3x80.txt>.
626
627 To compile this driver as a module, choose M here: the
628 module will be called dtc.
629
630config SCSI_EATA
631 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
Al Viroa5532602005-05-04 05:39:42 +0100632 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633 ---help---
634 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
635 ISA and all EISA I/O addresses are probed looking for the "EATA"
636 signature. The addresses of all the PCI SCSI controllers reported
637 by the PCI subsystem are probed as well.
638
639 You want to read the start of <file:drivers/scsi/eata.c> and the
640 SCSI-HOWTO, available from
641 <http://www.tldp.org/docs.html#howto>.
642
643 To compile this driver as a module, choose M here: the
644 module will be called eata.
645
646config SCSI_EATA_TAGGED_QUEUE
647 bool "enable tagged command queueing"
648 depends on SCSI_EATA
649 help
650 This is a feature of SCSI-2 which improves performance: the host
651 adapter can send several SCSI commands to a device's queue even if
652 previous commands haven't finished yet.
653 This is equivalent to the "eata=tc:y" boot option.
654
655config SCSI_EATA_LINKED_COMMANDS
656 bool "enable elevator sorting"
657 depends on SCSI_EATA
658 help
659 This option enables elevator sorting for all probed SCSI disks and
660 CD-ROMs. It definitely reduces the average seek distance when doing
661 random seeks, but this does not necessarily result in a noticeable
662 performance improvement: your mileage may vary...
663 This is equivalent to the "eata=lc:y" boot option.
664
665config SCSI_EATA_MAX_TAGS
666 int "maximum number of queued commands"
667 depends on SCSI_EATA
668 default "16"
669 help
670 This specifies how many SCSI commands can be maximally queued for
671 each probed SCSI device. You should reduce the default value of 16
672 only if you have disks with buggy or limited tagged command support.
673 Minimum is 2 and maximum is 62. This value is also the window size
674 used by the elevator sorting option above. The effective value used
675 by the driver for each probed SCSI device is reported at boot time.
676 This is equivalent to the "eata=mq:8" boot option.
677
678config SCSI_EATA_PIO
679 tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
680 depends on (ISA || EISA || PCI) && SCSI && BROKEN
681 ---help---
682 This driver supports all EATA-PIO protocol compliant SCSI Host
683 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
684 host adapters could also use this driver but are discouraged from
685 doing so, since this driver only supports hard disks and lacks
686 numerous features. You might want to have a look at the SCSI-HOWTO,
687 available from <http://www.tldp.org/docs.html#howto>.
688
689 To compile this driver as a module, choose M here: the
690 module will be called eata_pio.
691
692config SCSI_FUTURE_DOMAIN
693 tristate "Future Domain 16xx SCSI/AHA-2920A support"
694 depends on (ISA || PCI) && SCSI
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700695 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700696 ---help---
697 This is support for Future Domain's 16-bit SCSI host adapters
698 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
699 other adapters based on the Future Domain chipsets (Quantum
700 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
701 It is explained in section 3.7 of the SCSI-HOWTO, available from
702 <http://www.tldp.org/docs.html#howto>.
703
704 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
705 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
706 controller support"). This Future Domain driver works with the older
707 Adaptec AHA-2920A boards with a Future Domain chip on them.
708
709 To compile this driver as a module, choose M here: the
710 module will be called fdomain.
711
712config SCSI_FD_MCS
713 tristate "Future Domain MCS-600/700 SCSI support"
714 depends on MCA_LEGACY && SCSI
715 ---help---
716 This is support for Future Domain MCS 600/700 MCA SCSI adapters.
717 Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
718 is identical to the MCS 700 and hence also supported by this driver.
719 This driver also supports the Reply SB16/SCSI card (the SCSI part).
720 It supports multiple adapters in the same system.
721
722 To compile this driver as a module, choose M here: the
723 module will be called fd_mcs.
724
725config SCSI_GDTH
726 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
Sergio Luis99109302008-02-12 20:48:03 -0300727 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728 ---help---
729 Formerly called GDT SCSI Disk Array Controller Support.
730
731 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
732 manufactured by Intel Corporation/ICP vortex GmbH. It is documented
733 in the kernel source in <file:drivers/scsi/gdth.c> and
Johann Felix Soden889c94a2008-01-20 14:41:18 +0100734 <file:drivers/scsi/gdth.h>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700735
736 To compile this driver as a module, choose M here: the
737 module will be called gdth.
738
739config SCSI_GENERIC_NCR5380
740 tristate "Generic NCR5380/53c400 SCSI PIO support"
741 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500742 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743 ---help---
744 This is a driver for the old NCR 53c80 series of SCSI controllers
745 on boards using PIO. Most boards such as the Trantor T130 fit this
746 category, along with a large number of ISA 8bit controllers shipped
747 for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
748 you should select the specific driver for that card rather than
749 generic 5380 support.
750
751 It is explained in section 3.8 of the SCSI-HOWTO, available from
752 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
753 of the box, you may have to change some settings in
754 <file:drivers/scsi/g_NCR5380.h>.
755
756 To compile this driver as a module, choose M here: the
757 module will be called g_NCR5380.
758
759config SCSI_GENERIC_NCR5380_MMIO
760 tristate "Generic NCR5380/53c400 SCSI MMIO support"
761 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500762 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763 ---help---
764 This is a driver for the old NCR 53c80 series of SCSI controllers
765 on boards using memory mapped I/O.
766 It is explained in section 3.8 of the SCSI-HOWTO, available from
767 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
768 of the box, you may have to change some settings in
769 <file:drivers/scsi/g_NCR5380.h>.
770
771 To compile this driver as a module, choose M here: the
772 module will be called g_NCR5380_mmio.
773
774config SCSI_GENERIC_NCR53C400
775 bool "Enable NCR53c400 extensions"
776 depends on SCSI_GENERIC_NCR5380
777 help
778 This enables certain optimizations for the NCR53c400 SCSI cards.
779 You might as well try it out. Note that this driver will only probe
780 for the Trantor T130B in its default configuration; you might have
781 to pass a command line option to the kernel at boot time if it does
782 not detect your card. See the file
783 <file:Documentation/scsi/g_NCR5380.txt> for details.
784
785config SCSI_IBMMCA
786 tristate "IBMMCA SCSI support"
James Bottomley67b20092007-05-03 11:13:08 -0500787 depends on MCA && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700788 ---help---
789 This is support for the IBM SCSI adapter found in many of the PS/2
790 series computers. These machines have an MCA bus, so you need to
791 answer Y to "MCA support" as well and read
792 <file:Documentation/mca.txt>.
793
794 If the adapter isn't found during boot (a common problem for models
795 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
796 option, where <pun> is the id of the SCSI subsystem (usually 7, but
797 if that doesn't work check your reference diskette). Owners of
798 model 95 with a LED-matrix-display can in addition activate some
799 activity info like under OS/2, but more informative, by setting
800 'ibmmcascsi=display' as an additional kernel parameter. Try "man
801 bootparam" or see the documentation of your boot loader about how to
802 pass options to the kernel.
803
804 To compile this driver as a module, choose M here: the
805 module will be called ibmmca.
806
807config IBMMCA_SCSI_ORDER_STANDARD
808 bool "Standard SCSI-order"
809 depends on SCSI_IBMMCA
810 ---help---
811 In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
812 are assigned to the drive letters, starting with the lowest SCSI-id
813 (physical number -- pun) to be drive C:, as seen from DOS and
814 similar operating systems. When looking into papers describing the
815 ANSI-SCSI-standard, this assignment of drives appears to be wrong.
816 The SCSI-standard follows a hardware-hierarchy which says that id 7
817 has the highest priority and id 0 the lowest. Therefore, the host
818 adapters are still today everywhere placed as SCSI-id 7 by default.
819 In the SCSI-standard, the drive letters express the priority of the
820 disk. C: should be the hard disk, or a partition on it, with the
821 highest priority. This must therefore be the disk with the highest
822 SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
823 original definition of the SCSI-standard as also industrial- and
824 process-control-machines, like VME-CPUs running under realtime-OSes
825 (e.g. LynxOS, OS9) do.
826
827 If you like to run Linux on your MCA-machine with the same
828 assignment of hard disks as seen from e.g. DOS or OS/2 on your
829 machine, which is in addition conformant to the SCSI-standard, you
830 must say Y here. This is also necessary for MCA-Linux users who want
831 to keep downward compatibility to older releases of the
832 IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
833 June 1997).
834
835 If you like to have the lowest SCSI-id assigned as drive C:, as
836 modern SCSI-BIOSes do, which does not conform to the standard, but
837 is widespread and common in the PC-world of today, you must say N
838 here. If unsure, say Y.
839
840config IBMMCA_SCSI_DEV_RESET
841 bool "Reset SCSI-devices at boottime"
842 depends on SCSI_IBMMCA
843 ---help---
844 By default, SCSI-devices are reset when the machine is powered on.
845 However, some devices exist, like special-control-devices,
846 SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
847 not reset when switched on. If you say Y here, each device connected
848 to your SCSI-bus will be issued a reset-command after it has been
849 probed, while the kernel is booting. This may cause problems with
850 more modern devices, like hard disks, which do not appreciate these
851 reset commands, and can cause your system to hang. So say Y only if
852 you know that one of your older devices needs it; N is the safe
853 answer.
854
855config SCSI_IPS
856 tristate "IBM ServeRAID support"
857 depends on PCI && SCSI
858 ---help---
859 This is support for the IBM ServeRAID hardware RAID controllers.
860 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
861 for more information. If this driver does not work correctly
862 without modification please contact the author by email at
863 <ipslinux@adaptec.com>.
864
865 To compile this driver as a module, choose M here: the
866 module will be called ips.
867
868config SCSI_IBMVSCSI
869 tristate "IBM Virtual SCSI support"
870 depends on PPC_PSERIES || PPC_ISERIES
FUJITA Tomonori4d680412007-06-27 16:32:50 +0900871 select SCSI_SRP_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872 help
873 This is the IBM POWER Virtual SCSI Client
874
875 To compile this driver as a module, choose M here: the
876 module will be called ibmvscsic.
877
FUJITA Tomonori0e5d0302006-12-01 03:00:54 +0900878config SCSI_IBMVSCSIS
879 tristate "IBM Virtual SCSI Server support"
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900880 depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
FUJITA Tomonori0e5d0302006-12-01 03:00:54 +0900881 help
882 This is the SRP target driver for IBM pSeries virtual environments.
883
884 The userspace component needed to initialize the driver and
885 documentation can be found:
886
887 http://stgt.berlios.de/
888
889 To compile this driver as a module, choose M here: the
890 module will be called ibmvstgt.
891
Brian King072b91f2008-07-01 13:14:30 -0500892config SCSI_IBMVFC
893 tristate "IBM Virtual FC support"
894 depends on PPC_PSERIES && SCSI
895 select SCSI_FC_ATTRS
896 help
897 This is the IBM POWER Virtual FC Client
898
899 To compile this driver as a module, choose M here: the
900 module will be called ibmvfc.
901
902config SCSI_IBMVFC_TRACE
903 bool "enable driver internal trace"
904 depends on SCSI_IBMVFC
905 default y
906 help
907 If you say Y here, the driver will trace all commands issued
908 to the adapter. Performance impact is minimal. Trace can be
909 dumped using /sys/class/scsi_host/hostXX/trace.
910
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911config SCSI_INITIO
912 tristate "Initio 9100U(W) support"
913 depends on PCI && SCSI
914 help
915 This is support for the Initio 91XXU(W) SCSI host adapter. Please
916 read the SCSI-HOWTO, available from
917 <http://www.tldp.org/docs.html#howto>.
918
919 To compile this driver as a module, choose M here: the
920 module will be called initio.
921
922config SCSI_INIA100
923 tristate "Initio INI-A100U2W support"
924 depends on PCI && SCSI
925 help
926 This is support for the Initio INI-A100U2W SCSI host adapter.
927 Please read the SCSI-HOWTO, available from
928 <http://www.tldp.org/docs.html#howto>.
929
930 To compile this driver as a module, choose M here: the
931 module will be called a100u2w.
932
933config SCSI_PPA
934 tristate "IOMEGA parallel port (ppa - older drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800935 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700936 ---help---
937 This driver supports older versions of IOMEGA's parallel port ZIP
938 drive (a 100 MB removable media device).
939
940 Note that you can say N here if you have the SCSI version of the ZIP
941 drive: it will be supported automatically if you said Y to the
942 generic "SCSI disk support", above.
943
944 If you have the ZIP Plus drive or a more recent parallel port ZIP
945 drive (if the supplied cable with the drive is labeled "AutoDetect")
946 then you should say N here and Y to "IOMEGA parallel port (imm -
947 newer drives)", below.
948
949 For more information about this driver and how to use it you should
950 read the file <file:Documentation/scsi/ppa.txt>. You should also read
951 the SCSI-HOWTO, which is available from
952 <http://www.tldp.org/docs.html#howto>. If you use this driver,
953 you will still be able to use the parallel port for other tasks,
954 such as a printer; it is safe to compile both drivers into the
955 kernel.
956
957 To compile this driver as a module, choose M here: the
958 module will be called ppa.
959
960config SCSI_IMM
961 tristate "IOMEGA parallel port (imm - newer drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800962 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700963 ---help---
964 This driver supports newer versions of IOMEGA's parallel port ZIP
965 drive (a 100 MB removable media device).
966
967 Note that you can say N here if you have the SCSI version of the ZIP
968 drive: it will be supported automatically if you said Y to the
969 generic "SCSI disk support", above.
970
971 If you have the ZIP Plus drive or a more recent parallel port ZIP
972 drive (if the supplied cable with the drive is labeled "AutoDetect")
973 then you should say Y here; if you have an older ZIP drive, say N
974 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
975
976 For more information about this driver and how to use it you should
977 read the file <file:Documentation/scsi/ppa.txt>. You should also read
978 the SCSI-HOWTO, which is available from
979 <http://www.tldp.org/docs.html#howto>. If you use this driver,
980 you will still be able to use the parallel port for other tasks,
981 such as a printer; it is safe to compile both drivers into the
982 kernel.
983
984 To compile this driver as a module, choose M here: the
985 module will be called imm.
986
987config SCSI_IZIP_EPP16
988 bool "ppa/imm option - Use slow (but safe) EPP-16"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800989 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700990 ---help---
991 EPP (Enhanced Parallel Port) is a standard for parallel ports which
992 allows them to act as expansion buses that can handle up to 64
993 peripheral devices.
994
995 Some parallel port chipsets are slower than their motherboard, and
996 so we have to control the state of the chipset's FIFO queue every
997 now and then to avoid data loss. This will be done if you say Y
998 here.
999
1000 Generally, saying Y is the safe option and slows things down a bit.
1001
1002config SCSI_IZIP_SLOW_CTR
1003 bool "ppa/imm option - Assume slow parport control register"
Marko Kohtala6a19b412006-01-06 00:19:49 -08001004 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005 help
1006 Some parallel ports are known to have excessive delays between
1007 changing the parallel port control register and good data being
1008 available on the parallel port data/status register. This option
1009 forces a small delay (1.0 usec to be exact) after changing the
1010 control register to let things settle out. Enabling this option may
1011 result in a big drop in performance but some very old parallel ports
1012 (found in 386 vintage machines) will not work properly.
1013
1014 Generally, saying N is fine.
1015
Jeff Garzikb5762942007-10-25 20:58:22 -04001016config SCSI_MVSAS
1017 tristate "Marvell 88SE6440 SAS/SATA support"
1018 depends on PCI && SCSI
1019 select SCSI_SAS_LIBSAS
1020 help
1021 This driver supports Marvell SAS/SATA PCI devices.
1022
1023 To compiler this driver as a module, choose M here: the module
1024 will be called mvsas.
1025
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026config SCSI_NCR53C406A
1027 tristate "NCR53c406a SCSI support"
1028 depends on ISA && SCSI
1029 help
1030 This is support for the NCR53c406a SCSI host adapter. For user
1031 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
1032 in the kernel source. Also read the SCSI-HOWTO, available from
1033 <http://www.tldp.org/docs.html#howto>.
1034
1035 To compile this driver as a module, choose M here: the
1036 module will be called NCR53c406.
1037
1038config SCSI_NCR_D700
1039 tristate "NCR Dual 700 MCA SCSI support"
1040 depends on MCA && SCSI
1041 select SCSI_SPI_ATTRS
1042 help
1043 This is a driver for the MicroChannel Dual 700 card produced by
1044 NCR and commonly used in 345x/35xx/4100 class machines. It always
1045 tries to negotiate sync and uses tag command queueing.
1046
1047 Unless you have an NCR manufactured machine, the chances are that
1048 you do not have this SCSI card, so say N.
1049
Linus Torvalds1da177e2005-04-16 15:20:36 -07001050config SCSI_LASI700
1051 tristate "HP Lasi SCSI support for 53c700/710"
1052 depends on GSC && SCSI
1053 select SCSI_SPI_ATTRS
1054 help
1055 This is a driver for the SCSI controller in the Lasi chip found in
1056 many PA-RISC workstations & servers. If you do not know whether you
1057 have a Lasi chip, it is safe to say "Y" here.
1058
Thomas Bogendoerferc27d85f2006-12-25 21:32:04 +01001059config SCSI_SNI_53C710
1060 tristate "SNI RM SCSI support for 53c710"
1061 depends on SNI_RM && SCSI
1062 select SCSI_SPI_ATTRS
1063 select 53C700_LE_ON_BE
1064 help
1065 This is a driver for the onboard SCSI controller found in older
1066 SNI RM workstations & servers.
1067
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068config 53C700_LE_ON_BE
1069 bool
1070 depends on SCSI_LASI700
1071 default y
1072
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001073config SCSI_STEX
1074 tristate "Promise SuperTrak EX Series support"
1075 depends on PCI && SCSI
1076 ---help---
Ed Linee926b22006-12-04 17:49:36 -08001077 This driver supports Promise SuperTrak EX series storage controllers.
1078
1079 Promise provides Linux RAID configuration utility for these
1080 controllers. Please visit <http://www.promise.com> to download.
1081
1082 To compile this driver as a module, choose M here: the
1083 module will be called stex.
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001084
Kars de Jong63273132007-06-17 14:47:05 +02001085config 53C700_BE_BUS
1086 bool
Kars de Jong45804fb2007-06-17 14:47:09 +02001087 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
Kars de Jong63273132007-06-17 14:47:05 +02001088 default y
1089
Linus Torvalds1da177e2005-04-16 15:20:36 -07001090config SCSI_SYM53C8XX_2
1091 tristate "SYM53C8XX Version 2 SCSI support"
1092 depends on PCI && SCSI
1093 select SCSI_SPI_ATTRS
1094 ---help---
1095 This driver supports the whole NCR53C8XX/SYM53C8XX family of
1096 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
1097 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
1098 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
1099 controllers; you need to use the Fusion MPT driver for that.
1100
1101 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
1102 information.
1103
1104config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
1105 int "DMA addressing mode"
1106 depends on SCSI_SYM53C8XX_2
1107 default "1"
1108 ---help---
1109 This option only applies to PCI-SCSI chips that are PCI DAC
1110 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
1111
1112 When set to 0, the driver will program the chip to only perform
1113 32-bit DMA. When set to 1, the chip will be able to perform DMA
1114 to addresses up to 1TB. When set to 2, the driver supports the
1115 full 64-bit DMA address range, but can only address 16 segments
1116 of 4 GB each. This limits the total addressable range to 64 GB.
1117
1118 Most machines with less than 4GB of memory should use a setting
1119 of 0 for best performance. If your machine has 4GB of memory
1120 or more, you should set this option to 1 (the default).
1121
1122 The still experimental value 2 (64 bit DMA addressing with 16
1123 x 4GB segments limitation) can be used on systems that require
1124 PCI address bits past bit 39 to be set for the addressing of
1125 memory using PCI DAC cycles.
1126
1127config SCSI_SYM53C8XX_DEFAULT_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001128 int "Default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129 depends on SCSI_SYM53C8XX_2
1130 default "16"
1131 help
1132 This is the default value of the command queue depth the
1133 driver will announce to the generic SCSI layer for devices
1134 that support tagged command queueing. This value can be changed
1135 from the boot command line. This is a soft limit that cannot
1136 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
1137
1138config SCSI_SYM53C8XX_MAX_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001139 int "Maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001140 depends on SCSI_SYM53C8XX_2
1141 default "64"
1142 help
1143 This option allows you to specify the maximum number of commands
1144 that can be queued to any device, when tagged command queuing is
1145 possible. The driver supports up to 256 queued commands per device.
1146 This value is used as a compiled-in hard limit.
1147
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001148config SCSI_SYM53C8XX_MMIO
1149 bool "Use memory mapped IO"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001150 depends on SCSI_SYM53C8XX_2
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001151 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152 help
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001153 Memory mapped IO is faster than Port IO. Most people should
1154 answer Y here, but some machines may have problems. If you have
1155 to answer N here, please report the problem to the maintainer.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156
1157config SCSI_IPR
1158 tristate "IBM Power Linux RAID adapter support"
Brian King35a39692006-09-25 12:39:20 -05001159 depends on PCI && SCSI && ATA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160 select FW_LOADER
1161 ---help---
1162 This driver supports the IBM Power Linux family RAID adapters.
1163 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
1164 as IBM iSeries 5702, 5703, 5709, and 570A.
1165
1166config SCSI_IPR_TRACE
1167 bool "enable driver internal trace"
1168 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001169 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001170 help
1171 If you say Y here, the driver will trace all commands issued
1172 to the adapter. Performance impact is minimal. Trace can be
1173 dumped using /sys/bus/class/scsi_host/hostXX/trace.
1174
1175config SCSI_IPR_DUMP
1176 bool "enable adapter dump support"
1177 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001178 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001179 help
1180 If you say Y here, the driver will support adapter crash dump.
1181 If you enable this support, the iprdump daemon can be used
1182 to capture adapter failure analysis information.
1183
1184config SCSI_ZALON
1185 tristate "Zalon SCSI support"
1186 depends on GSC && SCSI
1187 select SCSI_SPI_ATTRS
1188 help
1189 The Zalon is a GSC/HSC bus interface chip that sits between the
1190 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1191 C110, J200, J210 and some D, K & R-class machines. It's also
1192 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1193 Say Y here if you have one of these machines or cards.
1194
1195config SCSI_NCR_Q720
1196 tristate "NCR Quad 720 MCA SCSI support"
1197 depends on MCA && SCSI
1198 select SCSI_SPI_ATTRS
1199 help
1200 This is a driver for the MicroChannel Quad 720 card produced by
1201 NCR and commonly used in 345x/35xx/4100 class machines. It always
1202 tries to negotiate sync and uses tag command queueing.
1203
1204 Unless you have an NCR manufactured machine, the chances are that
1205 you do not have this SCSI card, so say N.
1206
1207config SCSI_NCR53C8XX_DEFAULT_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001208 int "default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001209 depends on SCSI_ZALON || SCSI_NCR_Q720
1210 default "8"
1211 ---help---
1212 "Tagged command queuing" is a feature of SCSI-2 which improves
1213 performance: the host adapter can send several SCSI commands to a
1214 device's queue even if previous commands haven't finished yet.
1215 Because the device is intelligent, it can optimize its operations
1216 (like head positioning) based on its own request queue. Some SCSI
1217 devices don't implement this properly; if you want to disable this
1218 feature, enter 0 or 1 here (it doesn't matter which).
1219
1220 The default value is 8 and should be supported by most hard disks.
1221 This value can be overridden from the boot command line using the
1222 'tags' option as follows (example):
1223 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1224 4, set queue depth to 16 for target 2 and target 3 on controller 0
1225 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1226
1227 The normal answer therefore is to go with the default 8 and to use
1228 a boot command line option for devices that need to use a different
1229 command queue depth.
1230
1231 There is no safe option other than using good SCSI devices.
1232
1233config SCSI_NCR53C8XX_MAX_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001234 int "maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001235 depends on SCSI_ZALON || SCSI_NCR_Q720
1236 default "32"
1237 ---help---
1238 This option allows you to specify the maximum number of commands
1239 that can be queued to any device, when tagged command queuing is
1240 possible. The default value is 32. Minimum is 2, maximum is 64.
1241 Modern hard disks are able to support 64 tags and even more, but
1242 do not seem to be faster when more than 32 tags are being used.
1243
1244 So, the normal answer here is to go with the default value 32 unless
1245 you are using very large hard disks with large cache (>= 1 MB) that
1246 are able to take advantage of more than 32 tagged commands.
1247
1248 There is no safe option and the default answer is recommended.
1249
1250config SCSI_NCR53C8XX_SYNC
Roman Zippele55a3e82006-06-08 22:12:49 -07001251 int "synchronous transfers frequency in MHz"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252 depends on SCSI_ZALON || SCSI_NCR_Q720
1253 default "20"
1254 ---help---
1255 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1256 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1257 are respectively the maximum data transfer rates in mega-transfers
1258 per second for each class. For example, a FAST-20 Wide 16 device is
1259 able to transfer data at 20 million 16 bit packets per second for a
1260 total rate of 40 MB/s.
1261
1262 You may specify 0 if you want to only use asynchronous data
1263 transfers. This is the safest and slowest option. Otherwise, specify
1264 a value between 5 and 80, depending on the capability of your SCSI
1265 controller. The higher the number, the faster the data transfer.
1266 Note that 80 should normally be ok since the driver decreases the
1267 value automatically according to the controller's capabilities.
1268
1269 Your answer to this question is ignored for controllers with NVRAM,
1270 since the driver will get this information from the user set-up. It
1271 also can be overridden using a boot setup option, as follows
1272 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1273 for FAST-20 synchronous data transfer (20 mega-transfers per
1274 second).
1275
1276 The normal answer therefore is not to go with the default but to
1277 select the maximum value 80 allowing the driver to use the maximum
1278 value supported by each controller. If this causes problems with
1279 your SCSI devices, you should come back and decrease the value.
1280
1281 There is no safe option other than using good cabling, right
1282 terminations and SCSI conformant devices.
1283
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284config SCSI_NCR53C8XX_NO_DISCONNECT
Roman Zippele55a3e82006-06-08 22:12:49 -07001285 bool "not allow targets to disconnect"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1287 help
1288 This option is only provided for safety if you suspect some SCSI
1289 device of yours to not support properly the target-disconnect
1290 feature. In that case, you would say Y here. In general however, to
1291 not allow targets to disconnect is not reasonable if there is more
1292 than 1 device on a SCSI bus. The normal answer therefore is N.
1293
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294config SCSI_PAS16
1295 tristate "PAS16 SCSI support"
1296 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001297 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001298 ---help---
1299 This is support for a SCSI host adapter. It is explained in section
1300 3.10 of the SCSI-HOWTO, available from
1301 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1302 of the box, you may have to change some settings in
1303 <file:drivers/scsi/pas16.h>.
1304
1305 To compile this driver as a module, choose M here: the
1306 module will be called pas16.
1307
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308config SCSI_QLOGIC_FAS
1309 tristate "Qlogic FAS SCSI support"
1310 depends on ISA && SCSI
1311 ---help---
1312 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1313 FastSCSI! cards as well as any other card based on the FASXX chip
1314 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1315
1316 This driver does NOT support the PCI versions of these cards. The
1317 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1318 SCSI support"), below.
1319
1320 Information about this driver is contained in
1321 <file:Documentation/scsi/qlogicfas.txt>. You should also read the
1322 SCSI-HOWTO, available from
1323 <http://www.tldp.org/docs.html#howto>.
1324
1325 To compile this driver as a module, choose M here: the
1326 module will be called qlogicfas.
1327
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328config SCSI_QLOGIC_FC_FIRMWARE
1329 bool "Include loadable firmware in driver"
1330 depends on SCSI_QLOGIC_FC
1331 help
1332 Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
1333 expanded LUN addressing and FcTape (FCP-2) support, in the
1334 qlogicfc driver. This is required on some platforms.
1335
1336config SCSI_QLOGIC_1280
1337 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1338 depends on PCI && SCSI
1339 help
1340 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1341
1342 To compile this driver as a module, choose M here: the
1343 module will be called qla1280.
1344
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345config SCSI_QLOGICPTI
1346 tristate "PTI Qlogic, ISP Driver"
1347 depends on SBUS && SCSI
1348 help
1349 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1350 controllers are known under Solaris as qpti and in the openprom as
1351 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1352 driven by a different driver.
1353
1354 To compile this driver as a module, choose M here: the
1355 module will be called qlogicpti.
1356
1357source "drivers/scsi/qla2xxx/Kconfig"
David Somayajuluafaf5a22006-09-19 10:28:00 -07001358source "drivers/scsi/qla4xxx/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001359
dea31012005-04-17 16:05:31 -05001360config SCSI_LPFC
1361 tristate "Emulex LightPulse Fibre Channel Support"
1362 depends on PCI && SCSI
1363 select SCSI_FC_ATTRS
1364 help
1365 This lpfc driver supports the Emulex LightPulse
1366 Family of Fibre Channel PCI host adapters.
1367
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368config SCSI_SIM710
1369 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1370 depends on (EISA || MCA) && SCSI
1371 select SCSI_SPI_ATTRS
1372 ---help---
1373 This driver for NCR53c710 based SCSI host adapters.
1374
1375 It currently supports Compaq EISA cards and NCR MCA cards
1376
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377config SCSI_SYM53C416
1378 tristate "Symbios 53c416 SCSI support"
1379 depends on ISA && SCSI
1380 ---help---
1381 This is support for the sym53c416 SCSI host adapter, the SCSI
1382 adapter that comes with some HP scanners. This driver requires that
1383 the sym53c416 is configured first using some sort of PnP
1384 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
1385 are using isapnp then you need to compile this driver as a module
1386 and then load it using insmod after isapnp has run. The parameters
1387 of the configured card(s) should be passed to the driver. The format
1388 is:
1389
1390 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
1391
1392 To compile this driver as a module, choose M here: the
1393 module will be called sym53c416.
1394
1395config SCSI_DC395x
1396 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
1397 depends on PCI && SCSI && EXPERIMENTAL
1398 ---help---
1399 This driver supports PCI SCSI host adapters based on the ASIC
1400 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1401
1402 This driver works, but is still in experimental status. So better
1403 have a bootable disk and a backup in case of emergency.
1404
1405 Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
1406
1407 To compile this driver as a module, choose M here: the
1408 module will be called dc395x.
1409
1410config SCSI_DC390T
1411 tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
1412 depends on PCI && SCSI
1413 ---help---
1414 This driver supports PCI SCSI host adapters based on the Am53C974A
1415 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1416 PCscsi/PCnet (Am53/79C974) solutions.
1417
1418 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
1419
1420 Note that this driver does NOT support Tekram DC390W/U/F, which are
1421 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1422
1423 To compile this driver as a module, choose M here: the
1424 module will be called tmscsim.
1425
1426config SCSI_T128
1427 tristate "Trantor T128/T128F/T228 SCSI support"
1428 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001429 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -07001430 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431 ---help---
1432 This is support for a SCSI host adapter. It is explained in section
1433 3.11 of the SCSI-HOWTO, available from
1434 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1435 of the box, you may have to change some settings in
1436 <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
1437 Adaptec, and some former Trantor products are being sold under the
1438 Adaptec name.
1439
1440 To compile this driver as a module, choose M here: the
1441 module will be called t128.
1442
1443config SCSI_U14_34F
1444 tristate "UltraStor 14F/34F support"
Al Viroa5532602005-05-04 05:39:42 +01001445 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001446 ---help---
1447 This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
1448 The source at <file:drivers/scsi/u14-34f.c> contains some
1449 information about this hardware. If the driver doesn't work out of
1450 the box, you may have to change some settings in
1451 <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
1452 <http://www.tldp.org/docs.html#howto>. Note that there is also
1453 another driver for the same hardware: "UltraStor SCSI support",
1454 below. You should say Y to both only if you want 24F support as
1455 well.
1456
1457 To compile this driver as a module, choose M here: the
1458 module will be called u14-34f.
1459
1460config SCSI_U14_34F_TAGGED_QUEUE
1461 bool "enable tagged command queueing"
1462 depends on SCSI_U14_34F
1463 help
1464 This is a feature of SCSI-2 which improves performance: the host
1465 adapter can send several SCSI commands to a device's queue even if
1466 previous commands haven't finished yet.
1467 This is equivalent to the "u14-34f=tc:y" boot option.
1468
1469config SCSI_U14_34F_LINKED_COMMANDS
1470 bool "enable elevator sorting"
1471 depends on SCSI_U14_34F
1472 help
1473 This option enables elevator sorting for all probed SCSI disks and
1474 CD-ROMs. It definitely reduces the average seek distance when doing
1475 random seeks, but this does not necessarily result in a noticeable
1476 performance improvement: your mileage may vary...
1477 This is equivalent to the "u14-34f=lc:y" boot option.
1478
1479config SCSI_U14_34F_MAX_TAGS
1480 int "maximum number of queued commands"
1481 depends on SCSI_U14_34F
1482 default "8"
1483 help
1484 This specifies how many SCSI commands can be maximally queued for
1485 each probed SCSI device. You should reduce the default value of 8
1486 only if you have disks with buggy or limited tagged command support.
1487 Minimum is 2 and maximum is 14. This value is also the window size
1488 used by the elevator sorting option above. The effective value used
1489 by the driver for each probed SCSI device is reported at boot time.
1490 This is equivalent to the "u14-34f=mq:8" boot option.
1491
1492config SCSI_ULTRASTOR
1493 tristate "UltraStor SCSI support"
1494 depends on X86 && ISA && SCSI
1495 ---help---
1496 This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
1497 adapter family. This driver is explained in section 3.12 of the
1498 SCSI-HOWTO, available from
1499 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1500 of the box, you may have to change some settings in
1501 <file:drivers/scsi/ultrastor.h>.
1502
1503 Note that there is also another driver for the same hardware:
1504 "UltraStor 14F/34F support", above.
1505
1506 To compile this driver as a module, choose M here: the
1507 module will be called ultrastor.
1508
1509config SCSI_NSP32
1510 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1511 depends on PCI && SCSI && !64BIT
1512 help
1513 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1514 SCSI host adapter. Please read the SCSI-HOWTO, available from
1515 <http://www.tldp.org/docs.html#howto>.
1516
1517 To compile this driver as a module, choose M here: the
1518 module will be called nsp32.
1519
1520config SCSI_DEBUG
1521 tristate "SCSI debugging host simulator"
1522 depends on SCSI
1523 help
1524 This is a host adapter simulator that can simulate multiple hosts
1525 each with multiple dummy SCSI devices (disks). It defaults to one
1526 host adapter with one dummy SCSI disk. Each dummy disk uses kernel
1527 RAM as storage (i.e. it is a ramdisk). To save space when multiple
1528 dummy disks are simulated, they share the same kernel RAM for
1529 their storage. See <http://www.torque.net/sg/sdebug.html> for more
1530 information. This driver is primarily of use to those testing the
1531 SCSI and block subsystems. If unsure, say N.
1532
1533config SCSI_MESH
1534 tristate "MESH (Power Mac internal SCSI) support"
1535 depends on PPC32 && PPC_PMAC && SCSI
1536 help
1537 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1538 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1539 other Power Macintoshes do). Say Y to include support for this SCSI
1540 adaptor.
1541
1542 To compile this driver as a module, choose M here: the
1543 module will be called mesh.
1544
1545config SCSI_MESH_SYNC_RATE
1546 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1547 depends on SCSI_MESH
1548 default "5"
1549 help
1550 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1551 drives a bus which is entirely internal to the machine (such as the
1552 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1553 operation at up to 10 MB/s. On machines where the SCSI bus
1554 controlled by the MESH can have external devices connected, it is
1555 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1556 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1557 to disable synchronous operation.
1558
1559config SCSI_MESH_RESET_DELAY_MS
1560 int "initial bus reset delay (ms) (0 = no reset)"
1561 depends on SCSI_MESH
1562 default "4000"
1563
1564config SCSI_MAC53C94
1565 tristate "53C94 (Power Mac external SCSI) support"
1566 depends on PPC32 && PPC_PMAC && SCSI
1567 help
1568 On Power Macintoshes (and clones) with two SCSI buses, the external
1569 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1570 machines which only have one SCSI bus, such as the 7200, also use
1571 the 53C94. Say Y to include support for the 53C94.
1572
1573 To compile this driver as a module, choose M here: the
1574 module will be called mac53c94.
1575
1576source "drivers/scsi/arm/Kconfig"
1577
1578config JAZZ_ESP
1579 bool "MIPS JAZZ FAS216 SCSI support"
1580 depends on MACH_JAZZ && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001581 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001582 help
1583 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1584 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1585 systems.
1586
1587config A3000_SCSI
1588 tristate "A3000 WD33C93A support"
1589 depends on AMIGA && SCSI
1590 help
1591 If you have an Amiga 3000 and have SCSI devices connected to the
1592 built-in SCSI controller, say Y. Otherwise, say N.
1593
1594 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001595 module will be called a3000.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001596
1597config A2091_SCSI
1598 tristate "A2091/A590 WD33C93A support"
1599 depends on ZORRO && SCSI
1600 help
1601 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1602 say N.
1603
1604 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001605 module will be called a2091.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001606
1607config GVP11_SCSI
1608 tristate "GVP Series II WD33C93A support"
1609 depends on ZORRO && SCSI
1610 ---help---
1611 If you have a Great Valley Products Series II SCSI controller,
1612 answer Y. Also say Y if you have a later model of GVP SCSI
1613 controller (such as the GVP A4008 or a Combo board). Otherwise,
1614 answer N. This driver does NOT work for the T-Rex series of
1615 accelerators from TekMagic and GVP-M.
1616
1617 To compile this driver as a module, choose M here: the
1618 module will be called gvp11.
1619
Kars de Jonga16efc12007-06-17 14:47:08 +02001620config SCSI_A4000T
1621 tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
1622 depends on AMIGA && SCSI && EXPERIMENTAL
1623 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001624 help
Kars de Jonga16efc12007-06-17 14:47:08 +02001625 If you have an Amiga 4000T and have SCSI devices connected to the
1626 built-in SCSI controller, say Y. Otherwise, say N.
1627
1628 To compile this driver as a module, choose M here: the
1629 module will be called a4000t.
1630
Kars de Jong45804fb2007-06-17 14:47:09 +02001631config SCSI_ZORRO7XX
1632 tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)"
1633 depends on ZORRO && SCSI && EXPERIMENTAL
1634 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001635 help
Kars de Jong45804fb2007-06-17 14:47:09 +02001636 Support for various NCR53c710-based SCSI controllers on Zorro
1637 expansion boards for the Amiga.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001638 This includes:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001639 - the Amiga 4091 Zorro III SCSI-2 controller,
1640 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1641 (info at
1642 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1643 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1644 accelerator card for the Amiga 1200,
1645 - the SCSI controller on the GVP Turbo 040/060 accelerator.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001646
Linus Torvalds1da177e2005-04-16 15:20:36 -07001647config ATARI_SCSI
1648 tristate "Atari native SCSI support"
Michael Schmitzfb810d12007-05-01 22:32:35 +02001649 depends on ATARI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001650 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001651 ---help---
1652 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1653 Falcon, ...) say Y to get it supported. Of course also, if you have
1654 a compatible SCSI controller (e.g. for Medusa).
1655
1656 To compile this driver as a module, choose M here: the
1657 module will be called atari_scsi.
1658
1659 This driver supports both styles of NCR integration into the
1660 system: the TT style (separate DMA), and the Falcon style (via
1661 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1662 in the Hades (without DMA).
1663
1664config ATARI_SCSI_TOSHIBA_DELAY
1665 bool "Long delays for Toshiba CD-ROMs"
1666 depends on ATARI_SCSI
1667 help
1668 This option increases the delay after a SCSI arbitration to
1669 accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
1670 use a Toshiba CD-ROM drive; otherwise, the option is not needed and
1671 would impact performance a bit, so say N.
1672
1673config ATARI_SCSI_RESET_BOOT
1674 bool "Reset SCSI-devices at boottime"
1675 depends on ATARI_SCSI
1676 help
1677 Reset the devices on your Atari whenever it boots. This makes the
1678 boot process fractionally longer but may assist recovery from errors
1679 that leave the devices with SCSI operations partway completed.
1680
1681config TT_DMA_EMUL
1682 bool "Hades SCSI DMA emulator"
1683 depends on ATARI_SCSI && HADES
1684 help
1685 This option enables code which emulates the TT SCSI DMA chip on the
1686 Hades. This increases the SCSI transfer rates at least ten times
1687 compared to PIO transfers.
1688
1689config MAC_SCSI
1690 bool "Macintosh NCR5380 SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001691 depends on MAC && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001692 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001693 help
1694 This is the NCR 5380 SCSI controller included on most of the 68030
1695 based Macintoshes. If you have one of these say Y and read the
1696 SCSI-HOWTO, available from
1697 <http://www.tldp.org/docs.html#howto>.
1698
Finn Thain6fe07aa2008-04-25 10:06:05 -05001699config SCSI_MAC_ESP
1700 tristate "Macintosh NCR53c9[46] SCSI"
1701 depends on MAC && SCSI
Geert Uytterhoeven48fc8de2008-05-05 21:27:21 +02001702 select SCSI_SPI_ATTRS
Finn Thain6fe07aa2008-04-25 10:06:05 -05001703 help
1704 This is the NCR 53c9x SCSI controller found on most of the 68040
1705 based Macintoshes.
1706
1707 To compile this driver as a module, choose M here: the module
1708 will be called mac_esp.
1709
Linus Torvalds1da177e2005-04-16 15:20:36 -07001710config MVME147_SCSI
1711 bool "WD33C93 SCSI driver for MVME147"
Al Virofa53bb62005-08-23 22:48:07 +01001712 depends on MVME147 && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001713 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001714 help
1715 Support for the on-board SCSI controller on the Motorola MVME147
1716 single-board computer.
1717
1718config MVME16x_SCSI
Kars de Jong506c7bb2007-06-17 14:47:07 +02001719 tristate "NCR53C710 SCSI driver for MVME16x"
1720 depends on MVME16x && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001721 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001722 help
1723 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1724 SCSI controller chip. Almost everyone using one of these boards
1725 will want to say Y to this question.
1726
1727config BVME6000_SCSI
Kars de Jong8276b582007-06-17 14:47:06 +02001728 tristate "NCR53C710 SCSI driver for BVME6000"
1729 depends on BVME6000 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001730 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731 help
1732 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1733 SCSI controller chip. Almost everyone using one of these boards
1734 will want to say Y to this question.
1735
Linus Torvalds1da177e2005-04-16 15:20:36 -07001736config SUN3_SCSI
1737 tristate "Sun3 NCR5380 SCSI"
Sam Creaseyc39e7ee2006-12-09 10:37:05 +01001738 depends on SUN3 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001739 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001740 help
1741 This option will enable support for the OBIO (onboard io) NCR5380
1742 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1743 "Sun3" type VME scsi controllers also based on the NCR5380.
1744 General Linux information on the Sun 3 series (now discontinued)
1745 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1746
1747config SUN3X_ESP
1748 bool "Sun3x ESP SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001749 depends on SUN3X && SCSI=y
Thomas Bogendoerfer0bb67f12008-02-01 00:13:34 +01001750 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001751 help
1752 The ESP was an on-board SCSI controller used on Sun 3/80
1753 machines. Say Y here to compile in support for it.
1754
1755config SCSI_SUNESP
1756 tristate "Sparc ESP Scsi Driver"
1757 depends on SBUS && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001758 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001759 help
1760 This is the driver for the Sun ESP SCSI host adapter. The ESP
Frans Popdbfe54a2008-06-19 20:20:12 -07001761 chipset is present in most SPARC SBUS-based computers and
1762 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1763 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001764
1765 To compile this driver as a module, choose M here: the
Frans Popdbfe54a2008-06-19 20:20:12 -07001766 module will be called sun_esp.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001767
Linus Torvalds1da177e2005-04-16 15:20:36 -07001768config ZFCP
1769 tristate "FCP host bus adapter driver for IBM eServer zSeries"
Martin Schwidefsky347a8dc2006-01-06 00:19:28 -08001770 depends on S390 && QDIO && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001771 select SCSI_FC_ATTRS
1772 help
1773 If you want to access SCSI devices attached to your IBM eServer
1774 zSeries by means of Fibre Channel interfaces say Y.
1775 For details please refer to the documentation provided by IBM at
1776 <http://oss.software.ibm.com/developerworks/opensource/linux390>
1777
1778 This driver is also available as a module. This module will be
1779 called zfcp. If you want to compile it as a module, say M here
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001780 and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001781
FUJITA Tomonori26b14822006-12-01 03:00:50 +09001782config SCSI_SRP
1783 tristate "SCSI RDMA Protocol helper library"
1784 depends on SCSI && PCI
1785 select SCSI_TGT
1786 help
1787 If you wish to use SRP target drivers, say Y.
1788
1789 To compile this driver as a module, choose M here: the
1790 module will be called libsrp.
1791
Jan Engelhardtfc6e7402007-07-09 12:00:08 -07001792endif # SCSI_LOWLEVEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793
1794source "drivers/scsi/pcmcia/Kconfig"
1795
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -07001796source "drivers/scsi/device_handler/Kconfig"
1797
Linus Torvalds1da177e2005-04-16 15:20:36 -07001798endmenu