blob: 9f5e4d04efad5f1cd8354ffa6dede18da3d49689 [file] [log] [blame]
Kim, Miloff45262a2013-02-18 21:10:14 -08001/*
2 * LP5562 LED driver
3 *
4 * Copyright (C) 2013 Texas Instruments
5 *
6 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/delay.h>
14#include <linux/firmware.h>
15#include <linux/i2c.h>
Kim, Miloff45262a2013-02-18 21:10:14 -080016#include <linux/leds.h>
17#include <linux/module.h>
18#include <linux/mutex.h>
Sachin Kamatc68f46d2013-09-28 04:38:30 -070019#include <linux/of.h>
Kim, Miloff45262a2013-02-18 21:10:14 -080020#include <linux/platform_data/leds-lp55xx.h>
21#include <linux/slab.h>
22
23#include "leds-lp55xx-common.h"
24
25#define LP5562_PROGRAM_LENGTH 32
26#define LP5562_MAX_LEDS 4
27
28/* ENABLE Register 00h */
29#define LP5562_REG_ENABLE 0x00
30#define LP5562_EXEC_ENG1_M 0x30
31#define LP5562_EXEC_ENG2_M 0x0C
32#define LP5562_EXEC_ENG3_M 0x03
33#define LP5562_EXEC_M 0x3F
34#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
35#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
36#define LP5562_EXEC_RUN 0x2A
37#define LP5562_ENABLE_DEFAULT \
38 (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
39#define LP5562_ENABLE_RUN_PROGRAM \
40 (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
41
42/* OPMODE Register 01h */
43#define LP5562_REG_OP_MODE 0x01
44#define LP5562_MODE_ENG1_M 0x30
45#define LP5562_MODE_ENG2_M 0x0C
46#define LP5562_MODE_ENG3_M 0x03
47#define LP5562_LOAD_ENG1 0x10
48#define LP5562_LOAD_ENG2 0x04
49#define LP5562_LOAD_ENG3 0x01
50#define LP5562_RUN_ENG1 0x20
51#define LP5562_RUN_ENG2 0x08
52#define LP5562_RUN_ENG3 0x02
53#define LP5562_ENG1_IS_LOADING(mode) \
54 ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
55#define LP5562_ENG2_IS_LOADING(mode) \
56 ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
57#define LP5562_ENG3_IS_LOADING(mode) \
58 ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
59
60/* BRIGHTNESS Registers */
61#define LP5562_REG_R_PWM 0x04
62#define LP5562_REG_G_PWM 0x03
63#define LP5562_REG_B_PWM 0x02
64#define LP5562_REG_W_PWM 0x0E
65
66/* CURRENT Registers */
67#define LP5562_REG_R_CURRENT 0x07
68#define LP5562_REG_G_CURRENT 0x06
69#define LP5562_REG_B_CURRENT 0x05
70#define LP5562_REG_W_CURRENT 0x0F
71
72/* CONFIG Register 08h */
73#define LP5562_REG_CONFIG 0x08
Kim, Milo81f2a5b42013-03-20 17:37:04 -070074#define LP5562_PWM_HF 0x40
75#define LP5562_PWRSAVE_EN 0x20
76#define LP5562_CLK_INT 0x01 /* Internal clock */
77#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
Kim, Miloff45262a2013-02-18 21:10:14 -080078
79/* RESET Register 0Dh */
80#define LP5562_REG_RESET 0x0D
81#define LP5562_RESET 0xFF
82
83/* PROGRAM ENGINE Registers */
84#define LP5562_REG_PROG_MEM_ENG1 0x10
85#define LP5562_REG_PROG_MEM_ENG2 0x30
86#define LP5562_REG_PROG_MEM_ENG3 0x50
87
88/* LEDMAP Register 70h */
89#define LP5562_REG_ENG_SEL 0x70
90#define LP5562_ENG_SEL_PWM 0
91#define LP5562_ENG_FOR_RGB_M 0x3F
92#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
93#define LP5562_ENG_FOR_W_M 0xC0
94#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
95#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
96#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
97
98/* Program Commands */
99#define LP5562_CMD_DISABLE 0x00
100#define LP5562_CMD_LOAD 0x15
101#define LP5562_CMD_RUN 0x2A
102#define LP5562_CMD_DIRECT 0x3F
103#define LP5562_PATTERN_OFF 0
104
105static inline void lp5562_wait_opmode_done(void)
106{
107 /* operation mode change needs to be longer than 153 us */
108 usleep_range(200, 300);
109}
110
111static inline void lp5562_wait_enable_done(void)
112{
113 /* it takes more 488 us to update ENABLE register */
114 usleep_range(500, 600);
115}
116
117static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
118{
119 u8 addr[] = {
120 LP5562_REG_R_CURRENT,
121 LP5562_REG_G_CURRENT,
122 LP5562_REG_B_CURRENT,
123 LP5562_REG_W_CURRENT,
124 };
125
126 led->led_current = led_current;
127 lp55xx_write(led->chip, addr[led->chan_nr], led_current);
128}
129
130static void lp5562_load_engine(struct lp55xx_chip *chip)
131{
132 enum lp55xx_engine_index idx = chip->engine_idx;
133 u8 mask[] = {
134 [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
135 [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
136 [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
137 };
138
139 u8 val[] = {
140 [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
141 [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
142 [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
143 };
144
145 lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
146
147 lp5562_wait_opmode_done();
148}
149
150static void lp5562_stop_engine(struct lp55xx_chip *chip)
151{
152 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
153 lp5562_wait_opmode_done();
154}
155
156static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
157{
158 int ret;
159 u8 mode;
160 u8 exec;
161
162 /* stop engine */
163 if (!start) {
164 lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
165 lp5562_wait_enable_done();
166 lp5562_stop_engine(chip);
167 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
168 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
169 lp5562_wait_opmode_done();
170 return;
171 }
172
173 /*
174 * To run the engine,
175 * operation mode and enable register should updated at the same time
176 */
177
178 ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
179 if (ret)
180 return;
181
182 ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
183 if (ret)
184 return;
185
186 /* change operation mode to RUN only when each engine is loading */
187 if (LP5562_ENG1_IS_LOADING(mode)) {
188 mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
189 exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
190 }
191
192 if (LP5562_ENG2_IS_LOADING(mode)) {
193 mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
194 exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
195 }
196
197 if (LP5562_ENG3_IS_LOADING(mode)) {
198 mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
199 exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
200 }
201
202 lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
203 lp5562_wait_opmode_done();
204
205 lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
206 lp5562_wait_enable_done();
207}
208
209static int lp5562_update_firmware(struct lp55xx_chip *chip,
210 const u8 *data, size_t size)
211{
212 enum lp55xx_engine_index idx = chip->engine_idx;
213 u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
214 u8 addr[] = {
215 [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
216 [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
217 [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
218 };
219 unsigned cmd;
220 char c[3];
221 int program_size;
222 int nrchars;
223 int offset = 0;
224 int ret;
225 int i;
226
227 /* clear program memory before updating */
228 for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
229 lp55xx_write(chip, addr[idx] + i, 0);
230
231 i = 0;
232 while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
233 /* separate sscanfs because length is working only for %s */
234 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
235 if (ret != 1)
236 goto err;
237
238 ret = sscanf(c, "%2x", &cmd);
239 if (ret != 1)
240 goto err;
241
242 pattern[i] = (u8)cmd;
243 offset += nrchars;
244 i++;
245 }
246
247 /* Each instruction is 16bit long. Check that length is even */
248 if (i % 2)
249 goto err;
250
251 program_size = i;
252 for (i = 0; i < program_size; i++)
253 lp55xx_write(chip, addr[idx] + i, pattern[i]);
254
255 return 0;
256
257err:
258 dev_err(&chip->cl->dev, "wrong pattern format\n");
259 return -EINVAL;
260}
261
262static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
263{
264 const struct firmware *fw = chip->fw;
265
Nick Stoughton59b6f942019-07-17 14:56:06 -0700266 /*
267 * the firmware is encoded in ascii hex character, with 2 chars
268 * per byte
269 */
270 if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
Kim, Miloff45262a2013-02-18 21:10:14 -0800271 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
272 fw->size);
273 return;
274 }
275
276 /*
277 * Program momery sequence
278 * 1) set engine mode to "LOAD"
279 * 2) write firmware data into program memory
280 */
281
282 lp5562_load_engine(chip);
283 lp5562_update_firmware(chip, fw->data, fw->size);
284}
285
286static int lp5562_post_init_device(struct lp55xx_chip *chip)
287{
288 int ret;
Kim, Milo81f2a5b42013-03-20 17:37:04 -0700289 u8 cfg = LP5562_DEFAULT_CFG;
Kim, Miloff45262a2013-02-18 21:10:14 -0800290
291 /* Set all PWMs to direct control mode */
292 ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
293 if (ret)
294 return ret;
295
296 lp5562_wait_opmode_done();
297
Kim, Milo81f2a5b42013-03-20 17:37:04 -0700298 /* Update configuration for the clock setting */
299 if (!lp55xx_is_extclk_used(chip))
300 cfg |= LP5562_CLK_INT;
301
302 ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
Kim, Miloff45262a2013-02-18 21:10:14 -0800303 if (ret)
304 return ret;
305
306 /* Initialize all channels PWM to zero -> leds off */
307 lp55xx_write(chip, LP5562_REG_R_PWM, 0);
308 lp55xx_write(chip, LP5562_REG_G_PWM, 0);
309 lp55xx_write(chip, LP5562_REG_B_PWM, 0);
310 lp55xx_write(chip, LP5562_REG_W_PWM, 0);
311
312 /* Set LED map as register PWM by default */
313 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
314
315 return 0;
316}
317
Andrew Lunn95b2af62015-08-20 12:22:57 +0200318static int lp5562_led_brightness(struct lp55xx_led *led)
Kim, Miloff45262a2013-02-18 21:10:14 -0800319{
Kim, Miloff45262a2013-02-18 21:10:14 -0800320 struct lp55xx_chip *chip = led->chip;
321 u8 addr[] = {
322 LP5562_REG_R_PWM,
323 LP5562_REG_G_PWM,
324 LP5562_REG_B_PWM,
325 LP5562_REG_W_PWM,
326 };
Andrew Lunn95b2af62015-08-20 12:22:57 +0200327 int ret;
Kim, Miloff45262a2013-02-18 21:10:14 -0800328
329 mutex_lock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200330 ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
Kim, Miloff45262a2013-02-18 21:10:14 -0800331 mutex_unlock(&chip->lock);
Andrew Lunn95b2af62015-08-20 12:22:57 +0200332
333 return ret;
Kim, Miloff45262a2013-02-18 21:10:14 -0800334}
335
336static void lp5562_write_program_memory(struct lp55xx_chip *chip,
337 u8 base, const u8 *rgb, int size)
338{
339 int i;
340
341 if (!rgb || size <= 0)
342 return;
343
344 for (i = 0; i < size; i++)
345 lp55xx_write(chip, base + i, *(rgb + i));
346
347 lp55xx_write(chip, base + i, 0);
348 lp55xx_write(chip, base + i + 1, 0);
349}
350
351/* check the size of program count */
352static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
353{
Jingoo Han432eb692014-02-25 21:11:41 -0800354 return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
355 ptn->size_g >= LP5562_PROGRAM_LENGTH ||
356 ptn->size_b >= LP5562_PROGRAM_LENGTH;
Kim, Miloff45262a2013-02-18 21:10:14 -0800357}
358
359static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
360{
361 struct lp55xx_predef_pattern *ptn;
362 int i;
363
364 if (mode == LP5562_PATTERN_OFF) {
365 lp5562_run_engine(chip, false);
366 return 0;
367 }
368
369 ptn = chip->pdata->patterns + (mode - 1);
370 if (!ptn || _is_pc_overflow(ptn)) {
371 dev_err(&chip->cl->dev, "invalid pattern data\n");
372 return -EINVAL;
373 }
374
375 lp5562_stop_engine(chip);
376
377 /* Set LED map as RGB */
378 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
379
380 /* Load engines */
381 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
382 chip->engine_idx = i;
383 lp5562_load_engine(chip);
384 }
385
386 /* Clear program registers */
387 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
388 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
389 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
390 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
391 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
392 lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
393
394 /* Program engines */
395 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
396 ptn->r, ptn->size_r);
397 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
398 ptn->g, ptn->size_g);
399 lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
400 ptn->b, ptn->size_b);
401
402 /* Run engines */
403 lp5562_run_engine(chip, true);
404
405 return 0;
406}
407
408static ssize_t lp5562_store_pattern(struct device *dev,
409 struct device_attribute *attr,
410 const char *buf, size_t len)
411{
412 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
413 struct lp55xx_chip *chip = led->chip;
414 struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
415 int num_patterns = chip->pdata->num_patterns;
416 unsigned long mode;
417 int ret;
418
419 ret = kstrtoul(buf, 0, &mode);
420 if (ret)
421 return ret;
422
423 if (mode > num_patterns || !ptn)
424 return -EINVAL;
425
426 mutex_lock(&chip->lock);
427 ret = lp5562_run_predef_led_pattern(chip, mode);
428 mutex_unlock(&chip->lock);
429
430 if (ret)
431 return ret;
432
433 return len;
434}
435
436static ssize_t lp5562_store_engine_mux(struct device *dev,
437 struct device_attribute *attr,
438 const char *buf, size_t len)
439{
440 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
441 struct lp55xx_chip *chip = led->chip;
442 u8 mask;
443 u8 val;
444
445 /* LED map
446 * R ... Engine 1 (fixed)
447 * G ... Engine 2 (fixed)
448 * B ... Engine 3 (fixed)
449 * W ... Engine 1 or 2 or 3
450 */
451
452 if (sysfs_streq(buf, "RGB")) {
453 mask = LP5562_ENG_FOR_RGB_M;
454 val = LP5562_ENG_SEL_RGB;
455 } else if (sysfs_streq(buf, "W")) {
456 enum lp55xx_engine_index idx = chip->engine_idx;
457
458 mask = LP5562_ENG_FOR_W_M;
459 switch (idx) {
460 case LP55XX_ENGINE_1:
461 val = LP5562_ENG1_FOR_W;
462 break;
463 case LP55XX_ENGINE_2:
464 val = LP5562_ENG2_FOR_W;
465 break;
466 case LP55XX_ENGINE_3:
467 val = LP5562_ENG3_FOR_W;
468 break;
469 default:
470 return -EINVAL;
471 }
472
473 } else {
474 dev_err(dev, "choose RGB or W\n");
475 return -EINVAL;
476 }
477
478 mutex_lock(&chip->lock);
479 lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
480 mutex_unlock(&chip->lock);
481
482 return len;
483}
484
Milo Kimdaa124b2013-08-08 14:12:14 +0900485static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
486static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
Kim, Miloff45262a2013-02-18 21:10:14 -0800487
488static struct attribute *lp5562_attributes[] = {
489 &dev_attr_led_pattern.attr,
490 &dev_attr_engine_mux.attr,
491 NULL,
492};
493
494static const struct attribute_group lp5562_group = {
495 .attrs = lp5562_attributes,
496};
497
498/* Chip specific configurations */
499static struct lp55xx_device_config lp5562_cfg = {
500 .max_channel = LP5562_MAX_LEDS,
501 .reset = {
502 .addr = LP5562_REG_RESET,
503 .val = LP5562_RESET,
504 },
505 .enable = {
506 .addr = LP5562_REG_ENABLE,
507 .val = LP5562_ENABLE_DEFAULT,
508 },
509 .post_init_device = lp5562_post_init_device,
510 .set_led_current = lp5562_set_led_current,
Andrew Lunn95b2af62015-08-20 12:22:57 +0200511 .brightness_fn = lp5562_led_brightness,
Kim, Miloff45262a2013-02-18 21:10:14 -0800512 .run_engine = lp5562_run_engine,
513 .firmware_cb = lp5562_firmware_loaded,
514 .dev_attr_group = &lp5562_group,
515};
516
517static int lp5562_probe(struct i2c_client *client,
518 const struct i2c_device_id *id)
519{
520 int ret;
521 struct lp55xx_chip *chip;
522 struct lp55xx_led *led;
Milo Kimed1333522015-08-24 16:09:55 +0900523 struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
Kim, Miloe0150502013-05-07 00:14:49 -0700524 struct device_node *np = client->dev.of_node;
Kim, Miloff45262a2013-02-18 21:10:14 -0800525
Milo Kimed1333522015-08-24 16:09:55 +0900526 if (!pdata) {
Kim, Miloe0150502013-05-07 00:14:49 -0700527 if (np) {
Milo Kimed1333522015-08-24 16:09:55 +0900528 pdata = lp55xx_of_populate_pdata(&client->dev, np);
529 if (IS_ERR(pdata))
530 return PTR_ERR(pdata);
Kim, Miloe0150502013-05-07 00:14:49 -0700531 } else {
532 dev_err(&client->dev, "no platform data\n");
533 return -EINVAL;
534 }
Kim, Miloff45262a2013-02-18 21:10:14 -0800535 }
536
537 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
538 if (!chip)
539 return -ENOMEM;
540
541 led = devm_kzalloc(&client->dev,
542 sizeof(*led) * pdata->num_channels, GFP_KERNEL);
543 if (!led)
544 return -ENOMEM;
545
546 chip->cl = client;
547 chip->pdata = pdata;
548 chip->cfg = &lp5562_cfg;
549
550 mutex_init(&chip->lock);
551
552 i2c_set_clientdata(client, led);
553
554 ret = lp55xx_init_device(chip);
555 if (ret)
556 goto err_init;
557
558 ret = lp55xx_register_leds(led, chip);
559 if (ret)
560 goto err_register_leds;
561
562 ret = lp55xx_register_sysfs(chip);
563 if (ret) {
564 dev_err(&client->dev, "registering sysfs failed\n");
565 goto err_register_sysfs;
566 }
567
568 return 0;
569
570err_register_sysfs:
571 lp55xx_unregister_leds(led, chip);
572err_register_leds:
573 lp55xx_deinit_device(chip);
574err_init:
575 return ret;
576}
577
578static int lp5562_remove(struct i2c_client *client)
579{
580 struct lp55xx_led *led = i2c_get_clientdata(client);
581 struct lp55xx_chip *chip = led->chip;
582
583 lp5562_stop_engine(chip);
584
585 lp55xx_unregister_sysfs(chip);
586 lp55xx_unregister_leds(led, chip);
587 lp55xx_deinit_device(chip);
588
589 return 0;
590}
591
592static const struct i2c_device_id lp5562_id[] = {
593 { "lp5562", 0 },
Kim, Miloff45262a2013-02-18 21:10:14 -0800594 { }
595};
596MODULE_DEVICE_TABLE(i2c, lp5562_id);
597
Axel Lin28720cf2013-05-08 21:49:37 -0700598#ifdef CONFIG_OF
599static const struct of_device_id of_lp5562_leds_match[] = {
600 { .compatible = "ti,lp5562", },
601 {},
602};
603
604MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
605#endif
606
Kim, Miloff45262a2013-02-18 21:10:14 -0800607static struct i2c_driver lp5562_driver = {
608 .driver = {
609 .name = "lp5562",
Axel Lin28720cf2013-05-08 21:49:37 -0700610 .of_match_table = of_match_ptr(of_lp5562_leds_match),
Kim, Miloff45262a2013-02-18 21:10:14 -0800611 },
612 .probe = lp5562_probe,
613 .remove = lp5562_remove,
614 .id_table = lp5562_id,
615};
616
617module_i2c_driver(lp5562_driver);
618
619MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
620MODULE_AUTHOR("Milo Kim");
621MODULE_LICENSE("GPL");