Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2011 ST-Ericsson SA. |
| 3 | * Copyright (C) 2009 Motorola, Inc. |
| 4 | * |
| 5 | * License Terms: GNU General Public License v2 |
| 6 | * |
| 7 | * Simple driver for National Semiconductor LM3530 Backlight driver chip |
| 8 | * |
| 9 | * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> |
| 10 | * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com> |
| 11 | */ |
| 12 | |
| 13 | #include <linux/i2c.h> |
| 14 | #include <linux/leds.h> |
| 15 | #include <linux/slab.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/input.h> |
| 18 | #include <linux/led-lm3530.h> |
| 19 | #include <linux/types.h> |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 20 | #include <linux/regulator/consumer.h> |
Paul Gortmaker | 54f4ded | 2011-07-03 13:56:03 -0400 | [diff] [blame] | 21 | #include <linux/module.h> |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 22 | |
| 23 | #define LM3530_LED_DEV "lcd-backlight" |
| 24 | #define LM3530_NAME "lm3530-led" |
| 25 | |
| 26 | #define LM3530_GEN_CONFIG 0x10 |
| 27 | #define LM3530_ALS_CONFIG 0x20 |
| 28 | #define LM3530_BRT_RAMP_RATE 0x30 |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 29 | #define LM3530_ALS_IMP_SELECT 0x41 |
| 30 | #define LM3530_BRT_CTRL_REG 0xA0 |
| 31 | #define LM3530_ALS_ZB0_REG 0x60 |
| 32 | #define LM3530_ALS_ZB1_REG 0x61 |
| 33 | #define LM3530_ALS_ZB2_REG 0x62 |
| 34 | #define LM3530_ALS_ZB3_REG 0x63 |
| 35 | #define LM3530_ALS_Z0T_REG 0x70 |
| 36 | #define LM3530_ALS_Z1T_REG 0x71 |
| 37 | #define LM3530_ALS_Z2T_REG 0x72 |
| 38 | #define LM3530_ALS_Z3T_REG 0x73 |
| 39 | #define LM3530_ALS_Z4T_REG 0x74 |
Kim, Milo | 8544d0e | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 40 | #define LM3530_REG_MAX 14 |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 41 | |
| 42 | /* General Control Register */ |
| 43 | #define LM3530_EN_I2C_SHIFT (0) |
| 44 | #define LM3530_RAMP_LAW_SHIFT (1) |
| 45 | #define LM3530_MAX_CURR_SHIFT (2) |
| 46 | #define LM3530_EN_PWM_SHIFT (5) |
| 47 | #define LM3530_PWM_POL_SHIFT (6) |
| 48 | #define LM3530_EN_PWM_SIMPLE_SHIFT (7) |
| 49 | |
| 50 | #define LM3530_ENABLE_I2C (1 << LM3530_EN_I2C_SHIFT) |
| 51 | #define LM3530_ENABLE_PWM (1 << LM3530_EN_PWM_SHIFT) |
| 52 | #define LM3530_POL_LOW (1 << LM3530_PWM_POL_SHIFT) |
| 53 | #define LM3530_ENABLE_PWM_SIMPLE (1 << LM3530_EN_PWM_SIMPLE_SHIFT) |
| 54 | |
| 55 | /* ALS Config Register Options */ |
| 56 | #define LM3530_ALS_AVG_TIME_SHIFT (0) |
| 57 | #define LM3530_EN_ALS_SHIFT (3) |
| 58 | #define LM3530_ALS_SEL_SHIFT (5) |
| 59 | |
| 60 | #define LM3530_ENABLE_ALS (3 << LM3530_EN_ALS_SHIFT) |
| 61 | |
| 62 | /* Brightness Ramp Rate Register */ |
| 63 | #define LM3530_BRT_RAMP_FALL_SHIFT (0) |
| 64 | #define LM3530_BRT_RAMP_RISE_SHIFT (3) |
| 65 | |
| 66 | /* ALS Resistor Select */ |
| 67 | #define LM3530_ALS1_IMP_SHIFT (0) |
| 68 | #define LM3530_ALS2_IMP_SHIFT (4) |
| 69 | |
| 70 | /* Zone Boundary Register defaults */ |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 71 | #define LM3530_ALS_ZB_MAX (4) |
| 72 | #define LM3530_ALS_WINDOW_mV (1000) |
| 73 | #define LM3530_ALS_OFFSET_mV (4) |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 74 | |
| 75 | /* Zone Target Register defaults */ |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 76 | #define LM3530_DEF_ZT_0 (0x7F) |
| 77 | #define LM3530_DEF_ZT_1 (0x66) |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 78 | #define LM3530_DEF_ZT_2 (0x4C) |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 79 | #define LM3530_DEF_ZT_3 (0x33) |
| 80 | #define LM3530_DEF_ZT_4 (0x19) |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 81 | |
Kim, Milo | bbe6453 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 82 | /* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */ |
| 83 | #define MAX_BRIGHTNESS (127) |
| 84 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 85 | struct lm3530_mode_map { |
| 86 | const char *mode; |
| 87 | enum lm3530_mode mode_val; |
| 88 | }; |
| 89 | |
| 90 | static struct lm3530_mode_map mode_map[] = { |
| 91 | { "man", LM3530_BL_MODE_MANUAL }, |
| 92 | { "als", LM3530_BL_MODE_ALS }, |
| 93 | { "pwm", LM3530_BL_MODE_PWM }, |
| 94 | }; |
| 95 | |
| 96 | /** |
| 97 | * struct lm3530_data |
| 98 | * @led_dev: led class device |
| 99 | * @client: i2c client |
| 100 | * @pdata: LM3530 platform data |
| 101 | * @mode: mode of operation - manual, ALS, PWM |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 102 | * @regulator: regulator |
| 103 | * @brighness: previous brightness value |
| 104 | * @enable: regulator is enabled |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 105 | */ |
| 106 | struct lm3530_data { |
| 107 | struct led_classdev led_dev; |
| 108 | struct i2c_client *client; |
| 109 | struct lm3530_platform_data *pdata; |
| 110 | enum lm3530_mode mode; |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 111 | struct regulator *regulator; |
| 112 | enum led_brightness brightness; |
| 113 | bool enable; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 114 | }; |
| 115 | |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 116 | /* |
| 117 | * struct lm3530_als_data |
| 118 | * @config : value of ALS configuration register |
| 119 | * @imp_sel : value of ALS resistor select register |
| 120 | * @zone : values of ALS ZB(Zone Boundary) registers |
| 121 | */ |
| 122 | struct lm3530_als_data { |
| 123 | u8 config; |
| 124 | u8 imp_sel; |
| 125 | u8 zones[LM3530_ALS_ZB_MAX]; |
| 126 | }; |
| 127 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 128 | static const u8 lm3530_reg[LM3530_REG_MAX] = { |
| 129 | LM3530_GEN_CONFIG, |
| 130 | LM3530_ALS_CONFIG, |
| 131 | LM3530_BRT_RAMP_RATE, |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 132 | LM3530_ALS_IMP_SELECT, |
| 133 | LM3530_BRT_CTRL_REG, |
| 134 | LM3530_ALS_ZB0_REG, |
| 135 | LM3530_ALS_ZB1_REG, |
| 136 | LM3530_ALS_ZB2_REG, |
| 137 | LM3530_ALS_ZB3_REG, |
| 138 | LM3530_ALS_Z0T_REG, |
| 139 | LM3530_ALS_Z1T_REG, |
| 140 | LM3530_ALS_Z2T_REG, |
| 141 | LM3530_ALS_Z3T_REG, |
| 142 | LM3530_ALS_Z4T_REG, |
| 143 | }; |
| 144 | |
| 145 | static int lm3530_get_mode_from_str(const char *str) |
| 146 | { |
| 147 | int i; |
| 148 | |
| 149 | for (i = 0; i < ARRAY_SIZE(mode_map); i++) |
| 150 | if (sysfs_streq(str, mode_map[i].mode)) |
| 151 | return mode_map[i].mode_val; |
| 152 | |
Sachin Kamat | e0e0216 | 2012-09-12 14:34:09 +0800 | [diff] [blame] | 153 | return -EINVAL; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 154 | } |
| 155 | |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 156 | static void lm3530_als_configure(struct lm3530_platform_data *pdata, |
| 157 | struct lm3530_als_data *als) |
| 158 | { |
| 159 | int i; |
| 160 | u32 als_vmin, als_vmax, als_vstep; |
| 161 | |
| 162 | if (pdata->als_vmax == 0) { |
| 163 | pdata->als_vmin = 0; |
| 164 | pdata->als_vmax = LM3530_ALS_WINDOW_mV; |
| 165 | } |
| 166 | |
| 167 | als_vmin = pdata->als_vmin; |
| 168 | als_vmax = pdata->als_vmax; |
| 169 | |
| 170 | if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV) |
| 171 | pdata->als_vmax = als_vmax = als_vmin + LM3530_ALS_WINDOW_mV; |
| 172 | |
| 173 | /* n zone boundary makes n+1 zones */ |
| 174 | als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1); |
| 175 | |
| 176 | for (i = 0; i < LM3530_ALS_ZB_MAX; i++) |
| 177 | als->zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) + |
| 178 | als_vstep + (i * als_vstep)) * LED_FULL) / 1000; |
| 179 | |
| 180 | als->config = |
| 181 | (pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) | |
| 182 | (LM3530_ENABLE_ALS) | |
| 183 | (pdata->als_input_mode << LM3530_ALS_SEL_SHIFT); |
| 184 | |
| 185 | als->imp_sel = |
| 186 | (pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) | |
| 187 | (pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT); |
| 188 | } |
| 189 | |
Axel Lin | 5e3b7c6 | 2012-12-19 16:59:43 -0800 | [diff] [blame] | 190 | static int lm3530_led_enable(struct lm3530_data *drvdata) |
| 191 | { |
| 192 | int ret; |
| 193 | |
| 194 | if (drvdata->enable) |
| 195 | return 0; |
| 196 | |
| 197 | ret = regulator_enable(drvdata->regulator); |
| 198 | if (ret) { |
| 199 | dev_err(drvdata->led_dev.dev, "Failed to enable vin:%d\n", ret); |
| 200 | return ret; |
| 201 | } |
| 202 | |
| 203 | drvdata->enable = true; |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static void lm3530_led_disable(struct lm3530_data *drvdata) |
| 208 | { |
| 209 | int ret; |
| 210 | |
| 211 | if (!drvdata->enable) |
| 212 | return; |
| 213 | |
| 214 | ret = regulator_disable(drvdata->regulator); |
| 215 | if (ret) { |
| 216 | dev_err(drvdata->led_dev.dev, "Failed to disable vin:%d\n", |
| 217 | ret); |
| 218 | return; |
| 219 | } |
| 220 | |
| 221 | drvdata->enable = false; |
| 222 | } |
| 223 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 224 | static int lm3530_init_registers(struct lm3530_data *drvdata) |
| 225 | { |
| 226 | int ret = 0; |
| 227 | int i; |
| 228 | u8 gen_config; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 229 | u8 brt_ramp; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 230 | u8 brightness; |
| 231 | u8 reg_val[LM3530_REG_MAX]; |
Kim, Milo | 99ad98d | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 232 | struct lm3530_platform_data *pdata = drvdata->pdata; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 233 | struct i2c_client *client = drvdata->client; |
Kim, Milo | 99ad98d | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 234 | struct lm3530_pwm_data *pwm = &pdata->pwm_data; |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 235 | struct lm3530_als_data als; |
| 236 | |
| 237 | memset(&als, 0, sizeof(struct lm3530_als_data)); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 238 | |
Kim, Milo | 99ad98d | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 239 | gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) | |
| 240 | ((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 241 | |
Axel Lin | cea694c | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 242 | switch (drvdata->mode) { |
| 243 | case LM3530_BL_MODE_MANUAL: |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 244 | gen_config |= LM3530_ENABLE_I2C; |
| 245 | break; |
Axel Lin | cea694c | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 246 | case LM3530_BL_MODE_ALS: |
| 247 | gen_config |= LM3530_ENABLE_I2C; |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 248 | lm3530_als_configure(pdata, &als); |
Axel Lin | cea694c | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 249 | break; |
| 250 | case LM3530_BL_MODE_PWM: |
| 251 | gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE | |
| 252 | (pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT); |
| 253 | break; |
| 254 | } |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 255 | |
Kim, Milo | 99ad98d | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 256 | brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) | |
| 257 | (pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 258 | |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 259 | if (drvdata->brightness) |
| 260 | brightness = drvdata->brightness; |
| 261 | else |
Kim, Milo | 99ad98d | 2012-03-23 15:02:13 -0700 | [diff] [blame] | 262 | brightness = drvdata->brightness = pdata->brt_val; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 263 | |
Kim, Milo | bbe6453 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 264 | if (brightness > drvdata->led_dev.max_brightness) |
| 265 | brightness = drvdata->led_dev.max_brightness; |
| 266 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 267 | reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */ |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 268 | reg_val[1] = als.config; /* LM3530_ALS_CONFIG */ |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 269 | reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */ |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 270 | reg_val[3] = als.imp_sel; /* LM3530_ALS_IMP_SELECT */ |
Kim, Milo | 8544d0e | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 271 | reg_val[4] = brightness; /* LM3530_BRT_CTRL_REG */ |
Kim, Milo | 6335f8f | 2012-05-29 15:07:29 -0700 | [diff] [blame] | 272 | reg_val[5] = als.zones[0]; /* LM3530_ALS_ZB0_REG */ |
| 273 | reg_val[6] = als.zones[1]; /* LM3530_ALS_ZB1_REG */ |
| 274 | reg_val[7] = als.zones[2]; /* LM3530_ALS_ZB2_REG */ |
| 275 | reg_val[8] = als.zones[3]; /* LM3530_ALS_ZB3_REG */ |
Kim, Milo | 8544d0e | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 276 | reg_val[9] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */ |
| 277 | reg_val[10] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */ |
| 278 | reg_val[11] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */ |
| 279 | reg_val[12] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */ |
| 280 | reg_val[13] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */ |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 281 | |
Axel Lin | 5e3b7c6 | 2012-12-19 16:59:43 -0800 | [diff] [blame] | 282 | ret = lm3530_led_enable(drvdata); |
| 283 | if (ret) |
| 284 | return ret; |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 285 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 286 | for (i = 0; i < LM3530_REG_MAX; i++) { |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 287 | /* do not update brightness register when pwm mode */ |
| 288 | if (lm3530_reg[i] == LM3530_BRT_CTRL_REG && |
| 289 | drvdata->mode == LM3530_BL_MODE_PWM) { |
| 290 | if (pwm->pwm_set_intensity) |
| 291 | pwm->pwm_set_intensity(reg_val[i], |
| 292 | drvdata->led_dev.max_brightness); |
| 293 | continue; |
| 294 | } |
| 295 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 296 | ret = i2c_smbus_write_byte_data(client, |
| 297 | lm3530_reg[i], reg_val[i]); |
| 298 | if (ret) |
| 299 | break; |
| 300 | } |
| 301 | |
| 302 | return ret; |
| 303 | } |
| 304 | |
| 305 | static void lm3530_brightness_set(struct led_classdev *led_cdev, |
| 306 | enum led_brightness brt_val) |
| 307 | { |
| 308 | int err; |
| 309 | struct lm3530_data *drvdata = |
| 310 | container_of(led_cdev, struct lm3530_data, led_dev); |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 311 | struct lm3530_platform_data *pdata = drvdata->pdata; |
| 312 | struct lm3530_pwm_data *pwm = &pdata->pwm_data; |
| 313 | u8 max_brightness = led_cdev->max_brightness; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 314 | |
| 315 | switch (drvdata->mode) { |
| 316 | case LM3530_BL_MODE_MANUAL: |
| 317 | |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 318 | if (!drvdata->enable) { |
| 319 | err = lm3530_init_registers(drvdata); |
| 320 | if (err) { |
| 321 | dev_err(&drvdata->client->dev, |
| 322 | "Register Init failed: %d\n", err); |
| 323 | break; |
| 324 | } |
| 325 | } |
| 326 | |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 327 | /* set the brightness in brightness control register*/ |
| 328 | err = i2c_smbus_write_byte_data(drvdata->client, |
Kim, Milo | bbe6453 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 329 | LM3530_BRT_CTRL_REG, brt_val); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 330 | if (err) |
| 331 | dev_err(&drvdata->client->dev, |
| 332 | "Unable to set brightness: %d\n", err); |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 333 | else |
Kim, Milo | bbe6453 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 334 | drvdata->brightness = brt_val; |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 335 | |
Axel Lin | 5e3b7c6 | 2012-12-19 16:59:43 -0800 | [diff] [blame] | 336 | if (brt_val == 0) |
| 337 | lm3530_led_disable(drvdata); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 338 | break; |
| 339 | case LM3530_BL_MODE_ALS: |
| 340 | break; |
| 341 | case LM3530_BL_MODE_PWM: |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 342 | if (pwm->pwm_set_intensity) |
| 343 | pwm->pwm_set_intensity(brt_val, max_brightness); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 344 | break; |
| 345 | default: |
| 346 | break; |
| 347 | } |
| 348 | } |
| 349 | |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 350 | static ssize_t lm3530_mode_get(struct device *dev, |
| 351 | struct device_attribute *attr, char *buf) |
| 352 | { |
Kim, Milo | e13d978 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 353 | struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| 354 | struct lm3530_data *drvdata; |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 355 | int i, len = 0; |
| 356 | |
Kim, Milo | e13d978 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 357 | drvdata = container_of(led_cdev, struct lm3530_data, led_dev); |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 358 | for (i = 0; i < ARRAY_SIZE(mode_map); i++) |
| 359 | if (drvdata->mode == mode_map[i].mode_val) |
| 360 | len += sprintf(buf + len, "[%s] ", mode_map[i].mode); |
| 361 | else |
| 362 | len += sprintf(buf + len, "%s ", mode_map[i].mode); |
| 363 | |
| 364 | len += sprintf(buf + len, "\n"); |
| 365 | |
| 366 | return len; |
| 367 | } |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 368 | |
| 369 | static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute |
| 370 | *attr, const char *buf, size_t size) |
| 371 | { |
Kim, Milo | e13d978 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 372 | struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| 373 | struct lm3530_data *drvdata; |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 374 | struct lm3530_pwm_data *pwm; |
| 375 | u8 max_brightness; |
Kim, Milo | e13d978 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 376 | int mode, err; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 377 | |
Kim, Milo | e13d978 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 378 | drvdata = container_of(led_cdev, struct lm3530_data, led_dev); |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 379 | pwm = &drvdata->pdata->pwm_data; |
| 380 | max_brightness = led_cdev->max_brightness; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 381 | mode = lm3530_get_mode_from_str(buf); |
| 382 | if (mode < 0) { |
| 383 | dev_err(dev, "Invalid mode\n"); |
Sachin Kamat | e0e0216 | 2012-09-12 14:34:09 +0800 | [diff] [blame] | 384 | return mode; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 385 | } |
| 386 | |
Kim, Milo | bb98200 | 2012-03-23 15:02:12 -0700 | [diff] [blame] | 387 | drvdata->mode = mode; |
| 388 | |
| 389 | /* set pwm to low if unnecessary */ |
| 390 | if (mode != LM3530_BL_MODE_PWM && pwm->pwm_set_intensity) |
| 391 | pwm->pwm_set_intensity(0, max_brightness); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 392 | |
| 393 | err = lm3530_init_registers(drvdata); |
| 394 | if (err) { |
| 395 | dev_err(dev, "Setting %s Mode failed :%d\n", buf, err); |
| 396 | return err; |
| 397 | } |
| 398 | |
| 399 | return sizeof(drvdata->mode); |
| 400 | } |
Shreshtha Kumar Sahu | 40b1445 | 2011-07-25 17:13:17 -0700 | [diff] [blame] | 401 | static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 402 | |
Bill Pemberton | 98ea1ea | 2012-11-19 13:23:02 -0500 | [diff] [blame] | 403 | static int lm3530_probe(struct i2c_client *client, |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 404 | const struct i2c_device_id *id) |
| 405 | { |
Jingoo Han | 87aae1e | 2013-07-30 01:07:35 -0700 | [diff] [blame] | 406 | struct lm3530_platform_data *pdata = dev_get_platdata(&client->dev); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 407 | struct lm3530_data *drvdata; |
| 408 | int err = 0; |
| 409 | |
| 410 | if (pdata == NULL) { |
| 411 | dev_err(&client->dev, "platform data required\n"); |
Bryan Wu | 0b873f3 | 2012-07-04 12:24:40 +0800 | [diff] [blame] | 412 | return -ENODEV; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 413 | } |
| 414 | |
| 415 | /* BL mode */ |
| 416 | if (pdata->mode > LM3530_BL_MODE_PWM) { |
| 417 | dev_err(&client->dev, "Illegal Mode request\n"); |
Bryan Wu | 0b873f3 | 2012-07-04 12:24:40 +0800 | [diff] [blame] | 418 | return -EINVAL; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 419 | } |
| 420 | |
| 421 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| 422 | dev_err(&client->dev, "I2C_FUNC_I2C not supported\n"); |
Bryan Wu | 0b873f3 | 2012-07-04 12:24:40 +0800 | [diff] [blame] | 423 | return -EIO; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 424 | } |
| 425 | |
Bryan Wu | 0b873f3 | 2012-07-04 12:24:40 +0800 | [diff] [blame] | 426 | drvdata = devm_kzalloc(&client->dev, sizeof(struct lm3530_data), |
| 427 | GFP_KERNEL); |
| 428 | if (drvdata == NULL) |
| 429 | return -ENOMEM; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 430 | |
| 431 | drvdata->mode = pdata->mode; |
| 432 | drvdata->client = client; |
| 433 | drvdata->pdata = pdata; |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 434 | drvdata->brightness = LED_OFF; |
| 435 | drvdata->enable = false; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 436 | drvdata->led_dev.name = LM3530_LED_DEV; |
| 437 | drvdata->led_dev.brightness_set = lm3530_brightness_set; |
Kim, Milo | bbe6453 | 2012-03-23 15:02:11 -0700 | [diff] [blame] | 438 | drvdata->led_dev.max_brightness = MAX_BRIGHTNESS; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 439 | |
| 440 | i2c_set_clientdata(client, drvdata); |
| 441 | |
Sachin Kamat | a47df97 | 2012-09-11 19:42:10 +0800 | [diff] [blame] | 442 | drvdata->regulator = devm_regulator_get(&client->dev, "vin"); |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 443 | if (IS_ERR(drvdata->regulator)) { |
| 444 | dev_err(&client->dev, "regulator get failed\n"); |
| 445 | err = PTR_ERR(drvdata->regulator); |
| 446 | drvdata->regulator = NULL; |
Bryan Wu | 0b873f3 | 2012-07-04 12:24:40 +0800 | [diff] [blame] | 447 | return err; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 448 | } |
| 449 | |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 450 | if (drvdata->pdata->brt_val) { |
| 451 | err = lm3530_init_registers(drvdata); |
| 452 | if (err < 0) { |
| 453 | dev_err(&client->dev, |
| 454 | "Register Init failed: %d\n", err); |
Sachin Kamat | e0e0216 | 2012-09-12 14:34:09 +0800 | [diff] [blame] | 455 | return err; |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 456 | } |
| 457 | } |
| 458 | err = led_classdev_register(&client->dev, &drvdata->led_dev); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 459 | if (err < 0) { |
| 460 | dev_err(&client->dev, "Register led class failed: %d\n", err); |
Sachin Kamat | e0e0216 | 2012-09-12 14:34:09 +0800 | [diff] [blame] | 461 | return err; |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 462 | } |
| 463 | |
| 464 | err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode); |
| 465 | if (err < 0) { |
| 466 | dev_err(&client->dev, "File device creation failed: %d\n", err); |
| 467 | err = -ENODEV; |
| 468 | goto err_create_file; |
| 469 | } |
| 470 | |
| 471 | return 0; |
| 472 | |
| 473 | err_create_file: |
| 474 | led_classdev_unregister(&drvdata->led_dev); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 475 | return err; |
| 476 | } |
| 477 | |
Bill Pemberton | 678e8a6 | 2012-11-19 13:26:00 -0500 | [diff] [blame] | 478 | static int lm3530_remove(struct i2c_client *client) |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 479 | { |
| 480 | struct lm3530_data *drvdata = i2c_get_clientdata(client); |
| 481 | |
| 482 | device_remove_file(drvdata->led_dev.dev, &dev_attr_mode); |
Shreshtha Kumar Sahu | 9b2da53 | 2011-05-24 17:13:28 -0700 | [diff] [blame] | 483 | |
Axel Lin | 5e3b7c6 | 2012-12-19 16:59:43 -0800 | [diff] [blame] | 484 | lm3530_led_disable(drvdata); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 485 | led_classdev_unregister(&drvdata->led_dev); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 486 | return 0; |
| 487 | } |
| 488 | |
| 489 | static const struct i2c_device_id lm3530_id[] = { |
| 490 | {LM3530_NAME, 0}, |
| 491 | {} |
| 492 | }; |
Axel Lin | d5f33d4 | 2011-05-17 15:44:09 -0700 | [diff] [blame] | 493 | MODULE_DEVICE_TABLE(i2c, lm3530_id); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 494 | |
| 495 | static struct i2c_driver lm3530_i2c_driver = { |
| 496 | .probe = lm3530_probe, |
Bill Pemberton | df07cf8 | 2012-11-19 13:20:20 -0500 | [diff] [blame] | 497 | .remove = lm3530_remove, |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 498 | .id_table = lm3530_id, |
| 499 | .driver = { |
| 500 | .name = LM3530_NAME, |
| 501 | .owner = THIS_MODULE, |
| 502 | }, |
| 503 | }; |
| 504 | |
Axel Lin | 09a0d18 | 2012-01-10 15:09:27 -0800 | [diff] [blame] | 505 | module_i2c_driver(lm3530_i2c_driver); |
Shreshtha Kumar Sahu | b1e6b70 | 2011-03-22 16:30:16 -0700 | [diff] [blame] | 506 | |
| 507 | MODULE_DESCRIPTION("Back Light driver for LM3530"); |
| 508 | MODULE_LICENSE("GPL v2"); |
| 509 | MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>"); |