blob: 252230043c8253760b9bb31c6ecbfcd589d66039 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/************************************************************************/
2/* */
3/* Title : RIO Host Card Hardware Definitions */
4/* */
5/* Author : N.P.Vassallo */
6/* */
7/* Creation : 26th April 1999 */
8/* */
9/* Version : 1.0.0 */
10/* */
11/* Copyright : (c) Specialix International Ltd. 1999 *
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 * */
27/* Description : Prototypes, structures and definitions */
28/* describing the RIO board hardware */
29/* */
30/************************************************************************/
31
Andrew Morton8d8706e2006-01-11 12:17:49 -080032#ifndef _rioboard_h /* If RIOBOARD.H not already defined */
Linus Torvalds1da177e2005-04-16 15:20:36 -070033#define _rioboard_h 1
34
35/*****************************************************************************
36*********************** ***********************
37*********************** Hardware Control Registers ***********************
38*********************** ***********************
39*****************************************************************************/
40
41/* Hardware Registers... */
42
Andrew Morton8d8706e2006-01-11 12:17:49 -080043#define RIO_REG_BASE 0x7C00 /* Base of control registers */
Linus Torvalds1da177e2005-04-16 15:20:36 -070044
45#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */
46#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */
47#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */
48#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */
49
50#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */
51#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */
52#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */
53
54/* RIO_VPD_ROM definitions... */
Andrew Morton8d8706e2006-01-11 12:17:49 -080055#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */
56#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */
57#define VPD_HW_REV 0x02 /* READ: Hardware Revision */
58#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */
59#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */
60#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */
61#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */
62#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */
63#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */
64#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */
65#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */
66#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */
67#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */
68#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */
69#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */
70#define VPD_OEMID 0x0F /* READ: OEM Identifier */
71#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */
Linus Torvalds1da177e2005-04-16 15:20:36 -070072#define VPD_IDENT_LEN 0x10
73
74/* VPD ROM Definitions... */
75#define SLX_ID1 0x4D
76#define SLX_ID2 0x98
77
Andrew Morton8d8706e2006-01-11 12:17:49 -080078#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070079
80#define ID_SX_ISA 0x2
81#define ID_RIO_EISA 0x3
82#define ID_SX_PCI 0x5
83#define ID_SX_EISA 0x7
84#define ID_RIO_RTA16 0x9
85#define ID_RIO_ISA 0xA
86#define ID_RIO_MCA 0xB
87#define ID_RIO_SBUS 0xC
88#define ID_RIO_PCI 0xD
89#define ID_RIO_RTA8 0xE
90
91/* Transputer bootstrap definitions... */
92
93#define BOOTLOADADDR (0x8000 - 6)
94#define BOOTINDICATE (0x8000 - 2)
95
96/* Firmware load position... */
97
Andrew Morton8d8706e2006-01-11 12:17:49 -080098#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */
Linus Torvalds1da177e2005-04-16 15:20:36 -070099
100/*****************************************************************************
101***************************** *****************************
102***************************** RIO (Rev1) ISA *****************************
103***************************** *****************************
104*****************************************************************************/
105
106/* Control Register Definitions... */
107#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR"
108
Andrew Morton8d8706e2006-01-11 12:17:49 -0800109#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
110#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */
111#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */
112#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */
113#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */
114#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */
115#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
116#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117
118/*****************************************************************************
119***************************** *****************************
120***************************** RIO (Rev2) ISA *****************************
121***************************** *****************************
122*****************************************************************************/
123
124/* Control Register Definitions... */
125#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR"
126
Andrew Morton8d8706e2006-01-11 12:17:49 -0800127#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
128#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */
129#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
130#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */
131#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */
132#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */
133#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */
134#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */
135#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */
136#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
137#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700138
139/*****************************************************************************
140***************************** ******************************
141***************************** RIO (Jet) ISA ******************************
142***************************** ******************************
143*****************************************************************************/
144
145/* Control Register Definitions... */
146#define RIO_ISA3_IDENT "JET HOST BY KEV#"
147
Andrew Morton8d8706e2006-01-11 12:17:49 -0800148#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */
149#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
150#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */
151#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */
152#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */
153#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */
154#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */
155#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
157/*****************************************************************************
158********************************* ********************************
159********************************* RIO MCA ********************************
160********************************* ********************************
161*****************************************************************************/
162
163/* Control Register Definitions... */
164#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR"
165
Andrew Morton8d8706e2006-01-11 12:17:49 -0800166#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
167#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */
168#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169
170/*****************************************************************************
171******************************** ********************************
172******************************** RIO EISA ********************************
173******************************** ********************************
174*****************************************************************************/
175
176/* EISA Configuration Space Definitions... */
177#define EISA_PRODUCT_ID1 0xC80
178#define EISA_PRODUCT_ID2 0xC81
179#define EISA_PRODUCT_NUMBER 0xC82
180#define EISA_REVISION_NUMBER 0xC83
181#define EISA_CARD_ENABLE 0xC84
Andrew Morton8d8706e2006-01-11 12:17:49 -0800182#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */
183#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */
184#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */
185#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */
186#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */
187#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700188#define EISA_MEM_ADDR_23_16 0xC00
189#define EISA_MEM_ADDR_31_24 0xC01
Andrew Morton8d8706e2006-01-11 12:17:49 -0800190#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */
191#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */
192#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193
194/* Control Register Definitions... */
Andrew Morton8d8706e2006-01-11 12:17:49 -0800195#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
196#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */
197#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */
198#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */
199#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */
200#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */
201#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */
202#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */
203#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */
204#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */
205#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */
206#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */
207#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */
208#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */
209#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */
210#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211
212/*****************************************************************************
213******************************** ********************************
214******************************** RIO SBus ********************************
215******************************** ********************************
216*****************************************************************************/
217
218/* Control Register Definitions... */
219#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0"
220
Andrew Morton8d8706e2006-01-11 12:17:49 -0800221#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
222#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */
223#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
224#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */
225#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */
226#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */
227#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */
228#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */
229#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */
230#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */
231#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */
232#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */
233#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
234#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235
236/*****************************************************************************
237********************************* ********************************
238********************************* RIO PCI ********************************
239********************************* ********************************
240*****************************************************************************/
241
242/* Control Register Definitions... */
243#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#"
244
Andrew Morton8d8706e2006-01-11 12:17:49 -0800245#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
246#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */
247#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
248#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
249#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250
251/* PCI Definitions... */
Andrew Morton8d8706e2006-01-11 12:17:49 -0800252#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */
253#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */
254#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */
Andrew Morton8d8706e2006-01-11 12:17:49 -0800256#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257
258/*****************************************************************************
259***************************** ******************************
260***************************** RIO (Jet) PCI ******************************
261***************************** ******************************
262*****************************************************************************/
263
264/* Control Register Definitions... */
265#define RIO_PCI2_IDENT "JET HOST BY KEV#"
266
Andrew Morton8d8706e2006-01-11 12:17:49 -0800267#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */
268#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269
270/* PCI Definitions... */
Andrew Morton8d8706e2006-01-11 12:17:49 -0800271#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272
273#endif /*_rioboard_h */
274
275/* End of RIOBOARD.H */