blob: c434b6ba033793457581f5aa07b41d175698a057 [file] [log] [blame]
Arnd Bergmann2a36d702006-10-09 00:08:00 +02001/*
Andreas Mohrbbccc162010-12-20 10:38:47 -08002 * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
Arnd Bergmann2a36d702006-10-09 00:08:00 +02003 *
4 * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
5 *
Andreas Mohr76802852010-01-31 02:58:19 +00006 * Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
Arnd Bergmann2a36d702006-10-09 00:08:00 +02007 * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
8 * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
9 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
10 * Copyright (c) 2002-2003 TiVo Inc.
11 *
Andreas Mohr76802852010-01-31 02:58:19 +000012 * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
13 *
Andreas Mohrbbccc162010-12-20 10:38:47 -080014 * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
15 * per active notification by manufacturer
16 *
Andreas Mohr76802852010-01-31 02:58:19 +000017 * TODO:
Andreas Mohr76802852010-01-31 02:58:19 +000018 * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
19 * - implement ethtool_ops get_pauseparam/set_pauseparam
20 * via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
21 * - implement get_eeprom/[set_eeprom]
22 * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
23 * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
24 * can access only ~ 24, remaining user buffer is uninitialized garbage
25 * - anything else?
26 *
27 *
Arnd Bergmann2a36d702006-10-09 00:08:00 +020028 * This program is free software; you can redistribute it and/or modify
29 * it under the terms of the GNU General Public License as published by
30 * the Free Software Foundation; either version 2 of the License, or
31 * (at your option) any later version.
32 *
33 * This program is distributed in the hope that it will be useful,
34 * but WITHOUT ANY WARRANTY; without even the implied warranty of
35 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
36 * GNU General Public License for more details.
37 *
38 * You should have received a copy of the GNU General Public License
39 * along with this program; if not, write to the Free Software
40 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
41 */
42
43#include <linux/crc32.h>
44#include <linux/etherdevice.h>
45#include <linux/ethtool.h>
46#include <linux/init.h>
47#include <linux/mii.h>
48#include <linux/module.h>
49#include <linux/netdevice.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090050#include <linux/slab.h>
Arnd Bergmann2a36d702006-10-09 00:08:00 +020051#include <linux/usb.h>
Jussi Kivilinna3692e942008-01-26 00:51:45 +020052#include <linux/usb/usbnet.h>
Arnd Bergmann2a36d702006-10-09 00:08:00 +020053
54/* requests */
55#define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \
56 USB_RECIP_DEVICE)
57#define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \
58 USB_RECIP_DEVICE)
59#define MCS7830_RD_BREQ 0x0E
60#define MCS7830_WR_BREQ 0x0D
61
62#define MCS7830_CTRL_TIMEOUT 1000
63#define MCS7830_MAX_MCAST 64
64
65#define MCS7830_VENDOR_ID 0x9710
Andreas Mohrbbccc162010-12-20 10:38:47 -080066#define MCS7832_PRODUCT_ID 0x7832
Arnd Bergmann2a36d702006-10-09 00:08:00 +020067#define MCS7830_PRODUCT_ID 0x7830
Arnd Bergmann8382cc12008-08-23 22:02:23 +020068#define MCS7730_PRODUCT_ID 0x7730
69
70#define SITECOM_VENDOR_ID 0x0DF6
71#define LN_030_PRODUCT_ID 0x0021
Arnd Bergmann2a36d702006-10-09 00:08:00 +020072
73#define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
74 ADVERTISE_100HALF | ADVERTISE_10FULL | \
75 ADVERTISE_10HALF | ADVERTISE_CSMA)
76
Andreas Mohr00e49912010-01-31 02:58:26 +000077/* HIF_REG_XX corresponding index value */
Arnd Bergmann2a36d702006-10-09 00:08:00 +020078enum {
79 HIF_REG_MULTICAST_HASH = 0x00,
80 HIF_REG_PACKET_GAP1 = 0x08,
81 HIF_REG_PACKET_GAP2 = 0x09,
82 HIF_REG_PHY_DATA = 0x0a,
83 HIF_REG_PHY_CMD1 = 0x0c,
84 HIF_REG_PHY_CMD1_READ = 0x40,
85 HIF_REG_PHY_CMD1_WRITE = 0x20,
86 HIF_REG_PHY_CMD1_PHYADDR = 0x01,
87 HIF_REG_PHY_CMD2 = 0x0d,
88 HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80,
89 HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40,
90 HIF_REG_CONFIG = 0x0e,
Andreas Mohrc7746512010-01-31 02:58:33 +000091 /* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
Arnd Bergmann2a36d702006-10-09 00:08:00 +020092 HIF_REG_CONFIG_CFG = 0x80,
93 HIF_REG_CONFIG_SPEED100 = 0x40,
94 HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20,
95 HIF_REG_CONFIG_RXENABLE = 0x10,
96 HIF_REG_CONFIG_TXENABLE = 0x08,
97 HIF_REG_CONFIG_SLEEPMODE = 0x04,
98 HIF_REG_CONFIG_ALLMULTICAST = 0x02,
Andreas Mohr00e49912010-01-31 02:58:26 +000099 HIF_REG_CONFIG_PROMISCUOUS = 0x01,
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200100 HIF_REG_ETHERNET_ADDR = 0x0f,
Andreas Mohrc7746512010-01-31 02:58:33 +0000101 HIF_REG_FRAME_DROP_COUNTER = 0x15, /* 0..ff; reset: 0 */
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200102 HIF_REG_PAUSE_THRESHOLD = 0x16,
103 HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0,
104};
105
Andreas Mohr76802852010-01-31 02:58:19 +0000106/* Trailing status byte in Ethernet Rx frame */
107enum {
108 MCS7830_RX_SHORT_FRAME = 0x01, /* < 64 bytes */
109 MCS7830_RX_LENGTH_ERROR = 0x02, /* framelen != Ethernet length field */
110 MCS7830_RX_ALIGNMENT_ERROR = 0x04, /* non-even number of nibbles */
111 MCS7830_RX_CRC_ERROR = 0x08,
112 MCS7830_RX_LARGE_FRAME = 0x10, /* > 1518 bytes */
113 MCS7830_RX_FRAME_CORRECT = 0x20, /* frame is correct */
114 /* [7:6] reserved */
115};
116
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200117struct mcs7830_data {
118 u8 multi_filter[8];
119 u8 config;
120};
121
122static const char driver_name[] = "MOSCHIP usb-ethernet driver";
123
124static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
125{
126 struct usb_device *xdev = dev->udev;
127 int ret;
Christian Eggers6d317482009-01-21 12:56:24 -0800128 void *buffer;
129
130 buffer = kmalloc(size, GFP_NOIO);
131 if (buffer == NULL)
132 return -ENOMEM;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200133
134 ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
Christian Eggers6d317482009-01-21 12:56:24 -0800135 MCS7830_RD_BMREQ, 0x0000, index, buffer,
Russ Dill1d39da32008-01-07 23:15:41 -0800136 size, MCS7830_CTRL_TIMEOUT);
Christian Eggers6d317482009-01-21 12:56:24 -0800137 memcpy(data, buffer, size);
138 kfree(buffer);
139
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200140 return ret;
141}
142
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000143static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200144{
145 struct usb_device *xdev = dev->udev;
146 int ret;
Christian Eggers6d317482009-01-21 12:56:24 -0800147 void *buffer;
148
Julia Lawall99bf2362010-05-15 11:20:45 +0000149 buffer = kmemdup(data, size, GFP_NOIO);
Christian Eggers6d317482009-01-21 12:56:24 -0800150 if (buffer == NULL)
151 return -ENOMEM;
152
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200153 ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
Christian Eggers6d317482009-01-21 12:56:24 -0800154 MCS7830_WR_BMREQ, 0x0000, index, buffer,
Russ Dill1d39da32008-01-07 23:15:41 -0800155 size, MCS7830_CTRL_TIMEOUT);
Christian Eggers6d317482009-01-21 12:56:24 -0800156 kfree(buffer);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200157 return ret;
158}
159
160static void mcs7830_async_cmd_callback(struct urb *urb)
161{
162 struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
Oliver Neukumc94cb312008-12-18 23:00:59 -0800163 int status = urb->status;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200164
Oliver Neukumc94cb312008-12-18 23:00:59 -0800165 if (status < 0)
Joe Perches898eb712007-10-18 03:06:30 -0700166 printk(KERN_DEBUG "%s() failed with %d\n",
Oliver Neukumc94cb312008-12-18 23:00:59 -0800167 __func__, status);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200168
169 kfree(req);
170 usb_free_urb(urb);
171}
172
173static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
174{
175 struct usb_ctrlrequest *req;
176 int ret;
177 struct urb *urb;
178
179 urb = usb_alloc_urb(0, GFP_ATOMIC);
180 if (!urb) {
Joe Perches898eb712007-10-18 03:06:30 -0700181 dev_dbg(&dev->udev->dev,
182 "Error allocating URB in write_cmd_async!\n");
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200183 return;
184 }
185
186 req = kmalloc(sizeof *req, GFP_ATOMIC);
187 if (!req) {
Joe Perches898eb712007-10-18 03:06:30 -0700188 dev_err(&dev->udev->dev,
189 "Failed to allocate memory for control request\n");
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200190 goto out;
191 }
192 req->bRequestType = MCS7830_WR_BMREQ;
193 req->bRequest = MCS7830_WR_BREQ;
194 req->wValue = 0;
195 req->wIndex = cpu_to_le16(index);
196 req->wLength = cpu_to_le16(size);
197
198 usb_fill_control_urb(urb, dev->udev,
199 usb_sndctrlpipe(dev->udev, 0),
200 (void *)req, data, size,
201 mcs7830_async_cmd_callback, req);
202
203 ret = usb_submit_urb(urb, GFP_ATOMIC);
204 if (ret < 0) {
Joe Perches898eb712007-10-18 03:06:30 -0700205 dev_err(&dev->udev->dev,
206 "Error submitting the control message: ret=%d\n", ret);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200207 goto out;
208 }
209 return;
210out:
211 kfree(req);
212 usb_free_urb(urb);
213}
214
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000215static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200216{
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000217 int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200218 if (ret < 0)
219 return ret;
220 return 0;
221}
222
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000223static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr)
224{
225 int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
226
227 if (ret < 0)
228 return ret;
229 return 0;
230}
231
232static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
233{
234 int ret;
235 struct usbnet *dev = netdev_priv(netdev);
236 struct sockaddr *addr = p;
237
238 if (netif_running(netdev))
239 return -EBUSY;
240
241 if (!is_valid_ether_addr(addr->sa_data))
Danny Kukawka15b8f4c2012-02-21 02:07:50 +0000242 return -EADDRNOTAVAIL;
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000243
244 ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
245
246 if (ret < 0)
247 return ret;
248
249 /* it worked --> adopt it on netdev side */
250 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
251
252 return 0;
253}
254
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200255static int mcs7830_read_phy(struct usbnet *dev, u8 index)
256{
257 int ret;
258 int i;
259 __le16 val;
260
261 u8 cmd[2] = {
262 HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
263 HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
264 };
265
Arnd Bergmanna9fc6332006-10-09 00:08:02 +0200266 mutex_lock(&dev->phy_mutex);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200267 /* write the MII command */
268 ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
269 if (ret < 0)
270 goto out;
271
272 /* wait for the data to become valid, should be within < 1ms */
273 for (i = 0; i < 10; i++) {
274 ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
275 if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
276 break;
277 ret = -EIO;
278 msleep(1);
279 }
280 if (ret < 0)
281 goto out;
282
283 /* read actual register contents */
284 ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
285 if (ret < 0)
286 goto out;
287 ret = le16_to_cpu(val);
288 dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
289 index, val, i);
290out:
Arnd Bergmanna9fc6332006-10-09 00:08:02 +0200291 mutex_unlock(&dev->phy_mutex);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200292 return ret;
293}
294
295static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
296{
297 int ret;
298 int i;
299 __le16 le_val;
300
301 u8 cmd[2] = {
302 HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
303 HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
304 };
305
Arnd Bergmanna9fc6332006-10-09 00:08:02 +0200306 mutex_lock(&dev->phy_mutex);
307
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200308 /* write the new register contents */
309 le_val = cpu_to_le16(val);
310 ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
311 if (ret < 0)
312 goto out;
313
314 /* write the MII command */
315 ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
316 if (ret < 0)
317 goto out;
318
319 /* wait for the command to be accepted by the PHY */
320 for (i = 0; i < 10; i++) {
321 ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
322 if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
323 break;
324 ret = -EIO;
325 msleep(1);
326 }
327 if (ret < 0)
328 goto out;
329
330 ret = 0;
331 dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
332 index, val, i);
333out:
Arnd Bergmanna9fc6332006-10-09 00:08:02 +0200334 mutex_unlock(&dev->phy_mutex);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200335 return ret;
336}
337
338/*
339 * This algorithm comes from the original mcs7830 version 1.4 driver,
340 * not sure if it is needed.
341 */
342static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
343{
344 int ret;
345 /* Enable all media types */
346 ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
347
348 /* First reset BMCR */
349 if (!ret)
350 ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
351 /* Enable Auto Neg */
352 if (!ret)
353 ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
354 /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
355 if (!ret)
356 ret = mcs7830_write_phy(dev, MII_BMCR,
357 BMCR_ANENABLE | BMCR_ANRESTART );
Dan Carpenter0e214ad2010-12-17 03:25:43 +0000358 return ret;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200359}
360
361
362/*
363 * if we can read register 22, the chip revision is C or higher
364 */
365static int mcs7830_get_rev(struct usbnet *dev)
366{
367 u8 dummy[2];
368 int ret;
Andreas Mohrc7746512010-01-31 02:58:33 +0000369 ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200370 if (ret > 0)
371 return 2; /* Rev C or later */
372 return 1; /* earlier revision */
373}
374
375/*
376 * On rev. C we need to set the pause threshold
377 */
378static void mcs7830_rev_C_fixup(struct usbnet *dev)
379{
380 u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
381 int retry;
382
383 for (retry = 0; retry < 2; retry++) {
384 if (mcs7830_get_rev(dev) == 2) {
385 dev_info(&dev->udev->dev, "applying rev.C fixup\n");
386 mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
387 1, &pause_threshold);
388 }
389 msleep(1);
390 }
391}
392
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200393static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
394 int location)
395{
Wang Chen8f15ea42008-11-12 23:38:36 -0800396 struct usbnet *dev = netdev_priv(netdev);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200397 return mcs7830_read_phy(dev, location);
398}
399
400static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
401 int location, int val)
402{
Wang Chen8f15ea42008-11-12 23:38:36 -0800403 struct usbnet *dev = netdev_priv(netdev);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200404 mcs7830_write_phy(dev, location, val);
405}
406
407static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
408{
409 struct usbnet *dev = netdev_priv(net);
410 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
411}
412
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000413static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
414{
415 return (struct mcs7830_data *)&dev->data;
416}
417
418static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
419{
420 struct mcs7830_data *data = mcs7830_get_data(dev);
421 mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
422 sizeof data->multi_filter,
423 data->multi_filter);
424}
425
426static void mcs7830_hif_update_config(struct usbnet *dev)
427{
428 /* implementation specific to data->config
429 (argument needs to be heap-based anyway - USB DMA!) */
430 struct mcs7830_data *data = mcs7830_get_data(dev);
431 mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
432}
433
434static void mcs7830_data_set_multicast(struct net_device *net)
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200435{
436 struct usbnet *dev = netdev_priv(net);
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000437 struct mcs7830_data *data = mcs7830_get_data(dev);
438
439 memset(data->multi_filter, 0, sizeof data->multi_filter);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200440
441 data->config = HIF_REG_CONFIG_TXENABLE;
442
443 /* this should not be needed, but it doesn't work otherwise */
444 data->config |= HIF_REG_CONFIG_ALLMULTICAST;
445
446 if (net->flags & IFF_PROMISC) {
Andreas Mohr00e49912010-01-31 02:58:26 +0000447 data->config |= HIF_REG_CONFIG_PROMISCUOUS;
Joe Perches8e95a202009-12-03 07:58:21 +0000448 } else if (net->flags & IFF_ALLMULTI ||
Jiri Pirko4cd24ea2010-02-08 04:30:35 +0000449 netdev_mc_count(net) > MCS7830_MAX_MCAST) {
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200450 data->config |= HIF_REG_CONFIG_ALLMULTICAST;
Jiri Pirko4cd24ea2010-02-08 04:30:35 +0000451 } else if (netdev_mc_empty(net)) {
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200452 /* just broadcast and directed */
453 } else {
454 /* We use the 20 byte dev->data
455 * for our 8 byte filter buffer
456 * to avoid allocating memory that
457 * is tricky to free later */
Jiri Pirko22bedad32010-04-01 21:22:57 +0000458 struct netdev_hw_addr *ha;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200459 u32 crc_bits;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200460
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200461 /* Build the multicast hash filter. */
Jiri Pirko22bedad32010-04-01 21:22:57 +0000462 netdev_for_each_mc_addr(ha, net) {
463 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200464 data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200465 }
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000466 }
467}
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200468
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000469static int mcs7830_apply_base_config(struct usbnet *dev)
470{
471 int ret;
472
473 /* re-configure known MAC (suspend case etc.) */
474 ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
475 if (ret) {
476 dev_info(&dev->udev->dev, "Cannot set MAC address\n");
477 goto out;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200478 }
479
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000480 /* Set up PHY */
481 ret = mcs7830_set_autoneg(dev, 0);
482 if (ret) {
483 dev_info(&dev->udev->dev, "Cannot set autoneg\n");
484 goto out;
485 }
486
487 mcs7830_hif_update_multicast_hash(dev);
488 mcs7830_hif_update_config(dev);
489
490 mcs7830_rev_C_fixup(dev);
491 ret = 0;
492out:
493 return ret;
494}
495
496/* credits go to asix_set_multicast */
497static void mcs7830_set_multicast(struct net_device *net)
498{
499 struct usbnet *dev = netdev_priv(net);
500
501 mcs7830_data_set_multicast(net);
502
503 mcs7830_hif_update_multicast_hash(dev);
504 mcs7830_hif_update_config(dev);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200505}
506
507static int mcs7830_get_regs_len(struct net_device *net)
508{
509 struct usbnet *dev = netdev_priv(net);
510
511 switch (mcs7830_get_rev(dev)) {
512 case 1:
513 return 21;
514 case 2:
515 return 32;
516 }
517 return 0;
518}
519
520static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
521{
522 usbnet_get_drvinfo(net, drvinfo);
523 drvinfo->regdump_len = mcs7830_get_regs_len(net);
524}
525
526static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
527{
528 struct usbnet *dev = netdev_priv(net);
529
530 regs->version = mcs7830_get_rev(dev);
531 mcs7830_get_reg(dev, 0, regs->len, data);
532}
533
Stephen Hemminger0fc0b732009-09-02 01:03:33 -0700534static const struct ethtool_ops mcs7830_ethtool_ops = {
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200535 .get_drvinfo = mcs7830_get_drvinfo,
536 .get_regs_len = mcs7830_get_regs_len,
537 .get_regs = mcs7830_get_regs,
538
539 /* common usbnet calls */
Arnd Bergmannc41286f2006-10-09 00:08:01 +0200540 .get_link = usbnet_get_link,
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200541 .get_msglevel = usbnet_get_msglevel,
542 .set_msglevel = usbnet_set_msglevel,
Arnd Bergmannc41286f2006-10-09 00:08:01 +0200543 .get_settings = usbnet_get_settings,
544 .set_settings = usbnet_set_settings,
545 .nway_reset = usbnet_nway_reset,
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200546};
547
Stephen Hemmingere12c4f82009-03-20 19:35:57 +0000548static const struct net_device_ops mcs7830_netdev_ops = {
549 .ndo_open = usbnet_open,
550 .ndo_stop = usbnet_stop,
551 .ndo_start_xmit = usbnet_start_xmit,
552 .ndo_tx_timeout = usbnet_tx_timeout,
553 .ndo_change_mtu = usbnet_change_mtu,
554 .ndo_validate_addr = eth_validate_addr,
555 .ndo_do_ioctl = mcs7830_ioctl,
Jiri Pirkoafc4b132011-08-16 06:29:01 +0000556 .ndo_set_rx_mode = mcs7830_set_multicast,
Andreas Mohr00e49912010-01-31 02:58:26 +0000557 .ndo_set_mac_address = mcs7830_set_mac_address,
Stephen Hemmingere12c4f82009-03-20 19:35:57 +0000558};
559
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200560static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
561{
562 struct net_device *net = dev->net;
563 int ret;
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000564 int retry;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200565
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000566 /* Initial startup: Gather MAC address setting from EEPROM */
567 ret = -EINVAL;
568 for (retry = 0; retry < 5 && ret; retry++)
569 ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
570 if (ret) {
571 dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
572 goto out;
573 }
574
575 mcs7830_data_set_multicast(net);
576
577 ret = mcs7830_apply_base_config(dev);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200578 if (ret)
579 goto out;
580
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200581 net->ethtool_ops = &mcs7830_ethtool_ops;
Stephen Hemmingere12c4f82009-03-20 19:35:57 +0000582 net->netdev_ops = &mcs7830_netdev_ops;
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200583
584 /* reserve space for the status byte on rx */
585 dev->rx_urb_size = ETH_FRAME_LEN + 1;
586
587 dev->mii.mdio_read = mcs7830_mdio_read;
588 dev->mii.mdio_write = mcs7830_mdio_write;
589 dev->mii.dev = net;
590 dev->mii.phy_id_mask = 0x3f;
591 dev->mii.reg_num_mask = 0x1f;
592 dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
593
594 ret = usbnet_get_endpoints(dev, udev);
595out:
596 return ret;
597}
598
Andreas Mohr00e49912010-01-31 02:58:26 +0000599/* The chip always appends a status byte that we need to strip */
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200600static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
601{
602 u8 status;
603
604 if (skb->len == 0) {
605 dev_err(&dev->udev->dev, "unexpected empty rx frame\n");
606 return 0;
607 }
608
609 skb_trim(skb, skb->len - 1);
610 status = skb->data[skb->len];
611
Andreas Mohr76802852010-01-31 02:58:19 +0000612 if (status != MCS7830_RX_FRAME_CORRECT) {
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200613 dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
614
Andreas Mohr76802852010-01-31 02:58:19 +0000615 /* hmm, perhaps usbnet.c already sees a globally visible
616 frame error and increments rx_errors on its own already? */
617 dev->net->stats.rx_errors++;
618
619 if (status & (MCS7830_RX_SHORT_FRAME
620 |MCS7830_RX_LENGTH_ERROR
621 |MCS7830_RX_LARGE_FRAME))
622 dev->net->stats.rx_length_errors++;
623 if (status & MCS7830_RX_ALIGNMENT_ERROR)
624 dev->net->stats.rx_frame_errors++;
625 if (status & MCS7830_RX_CRC_ERROR)
626 dev->net->stats.rx_crc_errors++;
627 }
628
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200629 return skb->len > 0;
630}
631
632static const struct driver_info moschip_info = {
Andreas Mohrbbccc162010-12-20 10:38:47 -0800633 .description = "MOSCHIP 7830/7832/7730 usb-NET adapter",
Arnd Bergmann8382cc12008-08-23 22:02:23 +0200634 .bind = mcs7830_bind,
635 .rx_fixup = mcs7830_rx_fixup,
636 .flags = FLAG_ETHER,
637 .in = 1,
638 .out = 2,
639};
640
641static const struct driver_info sitecom_info = {
642 .description = "Sitecom LN-30 usb-NET adapter",
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200643 .bind = mcs7830_bind,
644 .rx_fixup = mcs7830_rx_fixup,
645 .flags = FLAG_ETHER,
646 .in = 1,
647 .out = 2,
648};
649
650static const struct usb_device_id products[] = {
651 {
Andreas Mohrbbccc162010-12-20 10:38:47 -0800652 USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
653 .driver_info = (unsigned long) &moschip_info,
654 },
655 {
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200656 USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
657 .driver_info = (unsigned long) &moschip_info,
658 },
Arnd Bergmann8382cc12008-08-23 22:02:23 +0200659 {
660 USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
661 .driver_info = (unsigned long) &moschip_info,
662 },
663 {
664 USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
665 .driver_info = (unsigned long) &sitecom_info,
666 },
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200667 {},
668};
669MODULE_DEVICE_TABLE(usb, products);
670
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000671static int mcs7830_reset_resume (struct usb_interface *intf)
672{
673 /* YES, this function is successful enough that ethtool -d
674 does show same output pre-/post-suspend */
675
676 struct usbnet *dev = usb_get_intfdata(intf);
677
678 mcs7830_apply_base_config(dev);
679
680 usbnet_resume(intf);
681
682 return 0;
683}
684
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200685static struct usb_driver mcs7830_driver = {
686 .name = driver_name,
687 .id_table = products,
688 .probe = usbnet_probe,
689 .disconnect = usbnet_disconnect,
690 .suspend = usbnet_suspend,
691 .resume = usbnet_resume,
Andreas Mohrace2a4d2010-01-31 02:58:42 +0000692 .reset_resume = mcs7830_reset_resume,
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200693};
694
Greg Kroah-Hartmand632eb12011-11-18 09:44:20 -0800695module_usb_driver(mcs7830_driver);
Arnd Bergmann2a36d702006-10-09 00:08:00 +0200696
697MODULE_DESCRIPTION("USB to network adapter MCS7830)");
698MODULE_LICENSE("GPL");