blob: a71a2927a6a094831c1c71140c314258c3dc9950 [file] [log] [blame]
Roland McGrath88ac2922008-07-25 19:45:43 -07001/*
2 * Tracing hooks
3 *
Roland McGrathae6d2ed2009-09-23 15:56:53 -07004 * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved.
Roland McGrath88ac2922008-07-25 19:45:43 -07005 *
6 * This copyrighted material is made available to anyone wishing to use,
7 * modify, copy, or redistribute it subject to the terms and conditions
8 * of the GNU General Public License v.2.
9 *
10 * This file defines hook entry points called by core code where
11 * user tracing/debugging support might need to do something. These
12 * entry points are called tracehook_*(). Each hook declared below
13 * has a detailed kerneldoc comment giving the context (locking et
14 * al) from which it is called, and the meaning of its return value.
15 *
16 * Each function here typically has only one call site, so it is ok
17 * to have some nontrivial tracehook_*() inlines. In all cases, the
18 * fast path when no tracing is enabled should be very short.
19 *
20 * The purpose of this file and the tracehook_* layer is to consolidate
21 * the interface that the kernel core and arch code uses to enable any
22 * user debugging or tracing facility (such as ptrace). The interfaces
23 * here are carefully documented so that maintainers of core and arch
24 * code do not need to think about the implementation details of the
25 * tracing facilities. Likewise, maintainers of the tracing code do not
26 * need to understand all the calling core or arch code in detail, just
27 * documented circumstances of each call, such as locking conditions.
28 *
29 * If the calling core code changes so that locking is different, then
30 * it is ok to change the interface documented here. The maintainer of
31 * core code changing should notify the maintainers of the tracing code
32 * that they need to work out the change.
33 *
34 * Some tracehook_*() inlines take arguments that the current tracing
35 * implementations might not necessarily use. These function signatures
36 * are chosen to pass in all the information that is on hand in the
37 * caller and might conceivably be relevant to a tracer, so that the
38 * core code won't have to be updated when tracing adds more features.
39 * If a call site changes so that some of those parameters are no longer
40 * already on hand without extra work, then the tracehook_* interface
41 * can change so there is no make-work burden on the core code. The
42 * maintainer of core code changing should notify the maintainers of the
43 * tracing code that they need to work out the change.
44 */
45
46#ifndef _LINUX_TRACEHOOK_H
47#define _LINUX_TRACEHOOK_H 1
48
49#include <linux/sched.h>
50#include <linux/ptrace.h>
Roland McGrath6341c392008-07-25 19:45:44 -070051#include <linux/security.h>
52struct linux_binprm;
53
Roland McGrath283d7552008-07-25 19:45:52 -070054/*
55 * ptrace report for syscall entry and exit looks identical.
56 */
57static inline void ptrace_report_syscall(struct pt_regs *regs)
58{
Tejun Heod21142e2011-06-17 16:50:34 +020059 int ptrace = current->ptrace;
Roland McGrath283d7552008-07-25 19:45:52 -070060
61 if (!(ptrace & PT_PTRACED))
62 return;
63
64 ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
65
66 /*
67 * this isn't the same as continuing with a signal, but it will do
68 * for normal use. strace only continues with a signal if the
69 * stopping signal is not SIGTRAP. -brl
70 */
71 if (current->exit_code) {
72 send_sig(current->exit_code, current, 1);
73 current->exit_code = 0;
74 }
75}
76
77/**
78 * tracehook_report_syscall_entry - task is about to attempt a system call
79 * @regs: user register state of current task
80 *
81 * This will be called if %TIF_SYSCALL_TRACE has been set, when the
82 * current task has just entered the kernel for a system call.
83 * Full user register state is available here. Changing the values
84 * in @regs can affect the system call number and arguments to be tried.
85 * It is safe to block here, preventing the system call from beginning.
86 *
87 * Returns zero normally, or nonzero if the calling arch code should abort
88 * the system call. That must prevent normal entry so no system call is
89 * made. If @task ever returns to user mode after this, its register state
90 * is unspecified, but should be something harmless like an %ENOSYS error
Roland McGrath828c3652008-07-25 19:45:57 -070091 * return. It should preserve enough information so that syscall_rollback()
92 * can work (see asm-generic/syscall.h).
Roland McGrath283d7552008-07-25 19:45:52 -070093 *
94 * Called without locks, just after entering kernel mode.
95 */
96static inline __must_check int tracehook_report_syscall_entry(
97 struct pt_regs *regs)
98{
99 ptrace_report_syscall(regs);
100 return 0;
101}
102
103/**
104 * tracehook_report_syscall_exit - task has just finished a system call
105 * @regs: user register state of current task
106 * @step: nonzero if simulating single-step or block-step
107 *
108 * This will be called if %TIF_SYSCALL_TRACE has been set, when the
109 * current task has just finished an attempted system call. Full
110 * user register state is available here. It is safe to block here,
111 * preventing signals from being processed.
112 *
113 * If @step is nonzero, this report is also in lieu of the normal
114 * trap that would follow the system call instruction because
115 * user_enable_block_step() or user_enable_single_step() was used.
116 * In this case, %TIF_SYSCALL_TRACE might not be set.
117 *
118 * Called without locks, just before checking for pending signals.
119 */
120static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
121{
Oleg Nesterov2f0edac2009-12-15 16:47:19 -0800122 if (step) {
123 siginfo_t info;
124 user_single_step_siginfo(current, regs, &info);
125 force_sig_info(SIGTRAP, &info, current);
126 return;
127 }
128
Roland McGrath283d7552008-07-25 19:45:52 -0700129 ptrace_report_syscall(regs);
130}
131
Roland McGrathfa8e26c2008-07-25 19:45:50 -0700132/**
Roland McGrathc45aea22008-07-25 19:45:50 -0700133 * tracehook_signal_handler - signal handler setup is complete
134 * @sig: number of signal being delivered
135 * @info: siginfo_t of signal being delivered
136 * @ka: sigaction setting that chose the handler
137 * @regs: user register state
138 * @stepping: nonzero if debugger single-step or block-step in use
139 *
140 * Called by the arch code after a signal handler has been set up.
141 * Register and stack state reflects the user handler about to run.
142 * Signal mask changes have already been made.
143 *
144 * Called without locks, shortly before returning to user mode
145 * (or handling more signals).
146 */
147static inline void tracehook_signal_handler(int sig, siginfo_t *info,
148 const struct k_sigaction *ka,
149 struct pt_regs *regs, int stepping)
150{
151 if (stepping)
152 ptrace_notify(SIGTRAP);
153}
154
Roland McGrath64b1208d2008-07-25 19:45:56 -0700155#ifdef TIF_NOTIFY_RESUME
156/**
157 * set_notify_resume - cause tracehook_notify_resume() to be called
158 * @task: task that will call tracehook_notify_resume()
159 *
160 * Calling this arranges that @task will call tracehook_notify_resume()
161 * before returning to user mode. If it's already running in user mode,
162 * it will enter the kernel and call tracehook_notify_resume() soon.
163 * If it's blocked, it will not be woken.
164 */
165static inline void set_notify_resume(struct task_struct *task)
166{
167 if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
168 kick_process(task);
169}
170
171/**
172 * tracehook_notify_resume - report when about to return to user mode
173 * @regs: user-mode registers of @current task
174 *
175 * This is called when %TIF_NOTIFY_RESUME has been set. Now we are
176 * about to return to user mode, and the user state in @regs can be
177 * inspected or adjusted. The caller in arch code has cleared
178 * %TIF_NOTIFY_RESUME before the call. If the flag gets set again
179 * asynchronously, this will be called again before we return to
180 * user mode.
181 *
182 * Called without locks.
183 */
184static inline void tracehook_notify_resume(struct pt_regs *regs)
185{
186}
187#endif /* TIF_NOTIFY_RESUME */
188
Roland McGrath88ac2922008-07-25 19:45:43 -0700189#endif /* <linux/tracehook.h> */