blob: 41fc61264443578e77fc4deb16ef276c79d2d502 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * C-Brick Serial Port (and console) driver for SGI Altix machines.
3 *
4 * This driver is NOT suitable for talking to the l1-controller for
5 * anything other than 'console activities' --- please use the l1
6 * driver for that.
7 *
8 *
Jes Sorensend171e512006-01-17 13:05:12 -05009 * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
Linus Torvalds1da177e2005-04-16 15:20:36 -070010 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of version 2 of the GNU General Public License
13 * as published by the Free Software Foundation.
14 *
15 * This program is distributed in the hope that it would be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
18 *
19 * Further, this software is distributed without any warranty that it is
20 * free of the rightful claim of any third person regarding infringement
21 * or the like. Any license provided herein, whether implied or
22 * otherwise, applies only to this software file. Patent licenses, if
23 * any, provided herein do not apply to combinations of this program with
24 * other software, or any other product whatsoever.
25 *
26 * You should have received a copy of the GNU General Public
27 * License along with this program; if not, write the Free Software
28 * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
29 *
30 * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
31 * Mountain View, CA 94043, or:
32 *
33 * http://www.sgi.com
34 *
35 * For further information regarding this notice, see:
36 *
37 * http://oss.sgi.com/projects/GenInfo/NoticeExplan
38 */
39
Linus Torvalds1da177e2005-04-16 15:20:36 -070040#include <linux/interrupt.h>
41#include <linux/tty.h>
42#include <linux/serial.h>
43#include <linux/console.h>
44#include <linux/module.h>
45#include <linux/sysrq.h>
46#include <linux/circ_buf.h>
47#include <linux/serial_reg.h>
48#include <linux/delay.h> /* for mdelay */
49#include <linux/miscdevice.h>
50#include <linux/serial_core.h>
51
52#include <asm/io.h>
53#include <asm/sn/simulator.h>
54#include <asm/sn/sn_sal.h>
55
56/* number of characters we can transmit to the SAL console at a time */
57#define SN_SAL_MAX_CHARS 120
58
59/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to
60 * avoid losing chars, (always has to be a power of 2) */
61#define SN_SAL_BUFFER_SIZE (64 * (1 << 10))
62
63#define SN_SAL_UART_FIFO_DEPTH 16
64#define SN_SAL_UART_FIFO_SPEED_CPS 9600/10
65
66/* sn_transmit_chars() calling args */
67#define TRANSMIT_BUFFERED 0
68#define TRANSMIT_RAW 1
69
70/* To use dynamic numbers only and not use the assigned major and minor,
71 * define the following.. */
72 /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */
73#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */
74
75/* Device name we're using */
76#define DEVICE_NAME "ttySG"
77#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */
78/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */
79#define DEVICE_MAJOR 204
80#define DEVICE_MINOR 40
81
82#ifdef CONFIG_MAGIC_SYSRQ
83static char sysrq_serial_str[] = "\eSYS";
84static char *sysrq_serial_ptr = sysrq_serial_str;
85static unsigned long sysrq_requested;
86#endif /* CONFIG_MAGIC_SYSRQ */
87
88/*
89 * Port definition - this kinda drives it all
90 */
91struct sn_cons_port {
92 struct timer_list sc_timer;
93 struct uart_port sc_port;
94 struct sn_sal_ops {
95 int (*sal_puts_raw) (const char *s, int len);
96 int (*sal_puts) (const char *s, int len);
97 int (*sal_getc) (void);
98 int (*sal_input_pending) (void);
99 void (*sal_wakeup_transmit) (struct sn_cons_port *, int);
100 } *sc_ops;
101 unsigned long sc_interrupt_timeout;
102 int sc_is_asynch;
103};
104
105static struct sn_cons_port sal_console_port;
106static int sn_process_input;
107
108/* Only used if USE_DYNAMIC_MINOR is set to 1 */
109static struct miscdevice misc; /* used with misc_register for dynamic */
110
111extern void early_sn_setup(void);
112
113#undef DEBUG
114#ifdef DEBUG
115static int sn_debug_printf(const char *fmt, ...);
116#define DPRINTF(x...) sn_debug_printf(x)
117#else
118#define DPRINTF(x...) do { } while (0)
119#endif
120
121/* Prototypes */
122static int snt_hw_puts_raw(const char *, int);
123static int snt_hw_puts_buffered(const char *, int);
124static int snt_poll_getc(void);
125static int snt_poll_input_pending(void);
126static int snt_intr_getc(void);
127static int snt_intr_input_pending(void);
128static void sn_transmit_chars(struct sn_cons_port *, int);
129
130/* A table for polling:
131 */
132static struct sn_sal_ops poll_ops = {
133 .sal_puts_raw = snt_hw_puts_raw,
134 .sal_puts = snt_hw_puts_raw,
135 .sal_getc = snt_poll_getc,
136 .sal_input_pending = snt_poll_input_pending
137};
138
139/* A table for interrupts enabled */
140static struct sn_sal_ops intr_ops = {
141 .sal_puts_raw = snt_hw_puts_raw,
142 .sal_puts = snt_hw_puts_buffered,
143 .sal_getc = snt_intr_getc,
144 .sal_input_pending = snt_intr_input_pending,
145 .sal_wakeup_transmit = sn_transmit_chars
146};
147
148/* the console does output in two distinctly different ways:
149 * synchronous (raw) and asynchronous (buffered). initally, early_printk
150 * does synchronous output. any data written goes directly to the SAL
151 * to be output (incidentally, it is internally buffered by the SAL)
152 * after interrupts and timers are initialized and available for use,
153 * the console init code switches to asynchronous output. this is
154 * also the earliest opportunity to begin polling for console input.
155 * after console initialization, console output and tty (serial port)
156 * output is buffered and sent to the SAL asynchronously (either by
157 * timer callback or by UART interrupt) */
158
159/* routines for running the console in polling mode */
160
161/**
162 * snt_poll_getc - Get a character from the console in polling mode
163 *
164 */
165static int snt_poll_getc(void)
166{
167 int ch;
168
169 ia64_sn_console_getc(&ch);
170 return ch;
171}
172
173/**
174 * snt_poll_input_pending - Check if any input is waiting - polling mode.
175 *
176 */
177static int snt_poll_input_pending(void)
178{
179 int status, input;
180
181 status = ia64_sn_console_check(&input);
182 return !status && input;
183}
184
185/* routines for an interrupt driven console (normal) */
186
187/**
188 * snt_intr_getc - Get a character from the console, interrupt mode
189 *
190 */
191static int snt_intr_getc(void)
192{
193 return ia64_sn_console_readc();
194}
195
196/**
197 * snt_intr_input_pending - Check if input is pending, interrupt mode
198 *
199 */
200static int snt_intr_input_pending(void)
201{
202 return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV;
203}
204
205/* these functions are polled and interrupt */
206
207/**
208 * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode
209 * @s: String
210 * @len: Length
211 *
212 */
213static int snt_hw_puts_raw(const char *s, int len)
214{
215 /* this will call the PROM and not return until this is done */
216 return ia64_sn_console_putb(s, len);
217}
218
219/**
220 * snt_hw_puts_buffered - Send string to console, polled or interrupt mode
221 * @s: String
222 * @len: Length
223 *
224 */
225static int snt_hw_puts_buffered(const char *s, int len)
226{
227 /* queue data to the PROM */
228 return ia64_sn_console_xmit_chars((char *)s, len);
229}
230
231/* uart interface structs
232 * These functions are associated with the uart_port that the serial core
233 * infrastructure calls.
234 *
235 * Note: Due to how the console works, many routines are no-ops.
236 */
237
238/**
239 * snp_type - What type of console are we?
240 * @port: Port to operate with (we ignore since we only have one port)
241 *
242 */
243static const char *snp_type(struct uart_port *port)
244{
245 return ("SGI SN L1");
246}
247
248/**
249 * snp_tx_empty - Is the transmitter empty? We pretend we're always empty
250 * @port: Port to operate on (we ignore since we only have one port)
251 *
252 */
253static unsigned int snp_tx_empty(struct uart_port *port)
254{
255 return 1;
256}
257
258/**
259 * snp_stop_tx - stop the transmitter - no-op for us
260 * @port: Port to operat eon - we ignore - no-op function
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 *
262 */
Russell Kingb129a8c2005-08-31 10:12:14 +0100263static void snp_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264{
265}
266
267/**
268 * snp_release_port - Free i/o and resources for port - no-op for us
269 * @port: Port to operate on - we ignore - no-op function
270 *
271 */
272static void snp_release_port(struct uart_port *port)
273{
274}
275
276/**
277 * snp_enable_ms - Force modem status interrupts on - no-op for us
278 * @port: Port to operate on - we ignore - no-op function
279 *
280 */
281static void snp_enable_ms(struct uart_port *port)
282{
283}
284
285/**
286 * snp_shutdown - shut down the port - free irq and disable - no-op for us
287 * @port: Port to shut down - we ignore
288 *
289 */
290static void snp_shutdown(struct uart_port *port)
291{
292}
293
294/**
295 * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console
296 * @port: Port to operate on - we ignore
297 * @mctrl: Lines to set/unset - we ignore
298 *
299 */
300static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl)
301{
302}
303
304/**
305 * snp_get_mctrl - get contorl line info, we just return a static value
306 * @port: port to operate on - we only have one port so we ignore this
307 *
308 */
309static unsigned int snp_get_mctrl(struct uart_port *port)
310{
311 return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS;
312}
313
314/**
315 * snp_stop_rx - Stop the receiver - we ignor ethis
316 * @port: Port to operate on - we ignore
317 *
318 */
319static void snp_stop_rx(struct uart_port *port)
320{
321}
322
323/**
324 * snp_start_tx - Start transmitter
325 * @port: Port to operate on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700326 *
327 */
Russell Kingb129a8c2005-08-31 10:12:14 +0100328static void snp_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329{
330 if (sal_console_port.sc_ops->sal_wakeup_transmit)
331 sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port,
332 TRANSMIT_BUFFERED);
333
334}
335
336/**
337 * snp_break_ctl - handle breaks - ignored by us
338 * @port: Port to operate on
339 * @break_state: Break state
340 *
341 */
342static void snp_break_ctl(struct uart_port *port, int break_state)
343{
344}
345
346/**
347 * snp_startup - Start up the serial port - always return 0 (We're always on)
348 * @port: Port to operate on
349 *
350 */
351static int snp_startup(struct uart_port *port)
352{
353 return 0;
354}
355
356/**
357 * snp_set_termios - set termios stuff - we ignore these
358 * @port: port to operate on
359 * @termios: New settings
360 * @termios: Old
361 *
362 */
363static void
Alan Cox606d0992006-12-08 02:38:45 -0800364snp_set_termios(struct uart_port *port, struct ktermios *termios,
365 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366{
367}
368
369/**
370 * snp_request_port - allocate resources for port - ignored by us
371 * @port: port to operate on
372 *
373 */
374static int snp_request_port(struct uart_port *port)
375{
376 return 0;
377}
378
379/**
380 * snp_config_port - allocate resources, set up - we ignore, we're always on
381 * @port: Port to operate on
382 * @flags: flags used for port setup
383 *
384 */
385static void snp_config_port(struct uart_port *port, int flags)
386{
387}
388
389/* Associate the uart functions above - given to serial core */
390
391static struct uart_ops sn_console_ops = {
392 .tx_empty = snp_tx_empty,
393 .set_mctrl = snp_set_mctrl,
394 .get_mctrl = snp_get_mctrl,
395 .stop_tx = snp_stop_tx,
396 .start_tx = snp_start_tx,
397 .stop_rx = snp_stop_rx,
398 .enable_ms = snp_enable_ms,
399 .break_ctl = snp_break_ctl,
400 .startup = snp_startup,
401 .shutdown = snp_shutdown,
402 .set_termios = snp_set_termios,
403 .pm = NULL,
404 .type = snp_type,
405 .release_port = snp_release_port,
406 .request_port = snp_request_port,
407 .config_port = snp_config_port,
408 .verify_port = NULL,
409};
410
411/* End of uart struct functions and defines */
412
413#ifdef DEBUG
414
415/**
416 * sn_debug_printf - close to hardware debugging printf
417 * @fmt: printf format
418 *
419 * This is as "close to the metal" as we can get, used when the driver
420 * itself may be broken.
421 *
422 */
423static int sn_debug_printf(const char *fmt, ...)
424{
425 static char printk_buf[1024];
426 int printed_len;
427 va_list args;
428
429 va_start(args, fmt);
430 printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args);
431
432 if (!sal_console_port.sc_ops) {
433 sal_console_port.sc_ops = &poll_ops;
434 early_sn_setup();
435 }
436 sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len);
437
438 va_end(args);
439 return printed_len;
440}
441#endif /* DEBUG */
442
443/*
444 * Interrupt handling routines.
445 */
446
447/**
448 * sn_receive_chars - Grab characters, pass them to tty layer
449 * @port: Port to operate on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450 * @flags: irq flags
451 *
452 * Note: If we're not registered with the serial core infrastructure yet,
453 * we don't try to send characters to it...
454 *
455 */
456static void
David Howells7d12e782006-10-05 14:55:46 +0100457sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458{
459 int ch;
460 struct tty_struct *tty;
461
462 if (!port) {
463 printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n");
464 return;
465 }
466
467 if (!port->sc_ops) {
468 printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n");
469 return;
470 }
471
472 if (port->sc_port.info) {
473 /* The serial_core stuffs are initilized, use them */
474 tty = port->sc_port.info->tty;
475 }
476 else {
477 /* Not registered yet - can't pass to tty layer. */
478 tty = NULL;
479 }
480
481 while (port->sc_ops->sal_input_pending()) {
482 ch = port->sc_ops->sal_getc();
483 if (ch < 0) {
484 printk(KERN_ERR "sn_console: An error occured while "
485 "obtaining data from the console (0x%0x)\n", ch);
486 break;
487 }
488#ifdef CONFIG_MAGIC_SYSRQ
489 if (sysrq_requested) {
490 unsigned long sysrq_timeout = sysrq_requested + HZ*5;
491
492 sysrq_requested = 0;
493 if (ch && time_before(jiffies, sysrq_timeout)) {
494 spin_unlock_irqrestore(&port->sc_port.lock, flags);
David Howells7d12e782006-10-05 14:55:46 +0100495 handle_sysrq(ch, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 spin_lock_irqsave(&port->sc_port.lock, flags);
497 /* ignore actual sysrq command char */
498 continue;
499 }
500 }
501 if (ch == *sysrq_serial_ptr) {
502 if (!(*++sysrq_serial_ptr)) {
503 sysrq_requested = jiffies;
504 sysrq_serial_ptr = sysrq_serial_str;
505 }
506 /*
507 * ignore the whole sysrq string except for the
508 * leading escape
509 */
510 if (ch != '\e')
511 continue;
512 }
513 else
514 sysrq_serial_ptr = sysrq_serial_str;
515#endif /* CONFIG_MAGIC_SYSRQ */
516
517 /* record the character to pass up to the tty layer */
518 if (tty) {
Alan Cox33f0f882006-01-09 20:54:13 -0800519 if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520 break;
521 }
522 port->sc_port.icount.rx++;
523 }
524
525 if (tty)
526 tty_flip_buffer_push(tty);
527}
528
529/**
530 * sn_transmit_chars - grab characters from serial core, send off
531 * @port: Port to operate on
532 * @raw: Transmit raw or buffered
533 *
534 * Note: If we're early, before we're registered with serial core, the
535 * writes are going through sn_sal_console_write because that's how
536 * register_console has been set up. We currently could have asynch
537 * polls calling this function due to sn_sal_switch_to_asynch but we can
538 * ignore them until we register with the serial core stuffs.
539 *
540 */
541static void sn_transmit_chars(struct sn_cons_port *port, int raw)
542{
543 int xmit_count, tail, head, loops, ii;
544 int result;
545 char *start;
546 struct circ_buf *xmit;
547
548 if (!port)
549 return;
550
551 BUG_ON(!port->sc_is_asynch);
552
553 if (port->sc_port.info) {
554 /* We're initilized, using serial core infrastructure */
555 xmit = &port->sc_port.info->xmit;
556 } else {
557 /* Probably sn_sal_switch_to_asynch has been run but serial core isn't
558 * initilized yet. Just return. Writes are going through
559 * sn_sal_console_write (due to register_console) at this time.
560 */
561 return;
562 }
563
564 if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) {
565 /* Nothing to do. */
Pat Gefre328007b2005-06-23 00:09:54 -0700566 ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567 return;
568 }
569
570 head = xmit->head;
571 tail = xmit->tail;
572 start = &xmit->buf[tail];
573
574 /* twice around gets the tail to the end of the buffer and
575 * then to the head, if needed */
576 loops = (head < tail) ? 2 : 1;
577
578 for (ii = 0; ii < loops; ii++) {
579 xmit_count = (head < tail) ?
580 (UART_XMIT_SIZE - tail) : (head - tail);
581
582 if (xmit_count > 0) {
583 if (raw == TRANSMIT_RAW)
584 result =
585 port->sc_ops->sal_puts_raw(start,
586 xmit_count);
587 else
588 result =
589 port->sc_ops->sal_puts(start, xmit_count);
590#ifdef DEBUG
591 if (!result)
592 DPRINTF("`");
593#endif
594 if (result > 0) {
595 xmit_count -= result;
596 port->sc_port.icount.tx += result;
597 tail += result;
598 tail &= UART_XMIT_SIZE - 1;
599 xmit->tail = tail;
600 start = &xmit->buf[tail];
601 }
602 }
603 }
604
605 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
606 uart_write_wakeup(&port->sc_port);
607
608 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100609 snp_stop_tx(&port->sc_port); /* no-op for us */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610}
611
612/**
613 * sn_sal_interrupt - Handle console interrupts
614 * @irq: irq #, useful for debug statements
615 * @dev_id: our pointer to our port (sn_cons_port which contains the uart port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700616 *
617 */
David Howells7d12e782006-10-05 14:55:46 +0100618static irqreturn_t sn_sal_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619{
620 struct sn_cons_port *port = (struct sn_cons_port *)dev_id;
621 unsigned long flags;
622 int status = ia64_sn_console_intr_status();
623
624 if (!port)
625 return IRQ_NONE;
626
627 spin_lock_irqsave(&port->sc_port.lock, flags);
628 if (status & SAL_CONSOLE_INTR_RECV) {
David Howells7d12e782006-10-05 14:55:46 +0100629 sn_receive_chars(port, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700630 }
631 if (status & SAL_CONSOLE_INTR_XMIT) {
632 sn_transmit_chars(port, TRANSMIT_BUFFERED);
633 }
634 spin_unlock_irqrestore(&port->sc_port.lock, flags);
635 return IRQ_HANDLED;
636}
637
638/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 * sn_sal_timer_poll - this function handles polled console mode
640 * @data: A pointer to our sn_cons_port (which contains the uart port)
641 *
642 * data is the pointer that init_timer will store for us. This function is
643 * associated with init_timer to see if there is any console traffic.
644 * Obviously not used in interrupt mode
645 *
646 */
647static void sn_sal_timer_poll(unsigned long data)
648{
649 struct sn_cons_port *port = (struct sn_cons_port *)data;
650 unsigned long flags;
651
652 if (!port)
653 return;
654
655 if (!port->sc_port.irq) {
656 spin_lock_irqsave(&port->sc_port.lock, flags);
657 if (sn_process_input)
Tony Luck8c1addb2006-10-06 10:09:41 -0700658 sn_receive_chars(port, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700659 sn_transmit_chars(port, TRANSMIT_RAW);
660 spin_unlock_irqrestore(&port->sc_port.lock, flags);
661 mod_timer(&port->sc_timer,
662 jiffies + port->sc_interrupt_timeout);
663 }
664}
665
666/*
667 * Boot-time initialization code
668 */
669
670/**
671 * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch)
672 * @port: Our sn_cons_port (which contains the uart port)
673 *
674 * So this is used by sn_sal_serial_console_init (early on, before we're
675 * registered with serial core). It's also used by sn_sal_module_init
676 * right after we've registered with serial core. The later only happens
677 * if we didn't already come through here via sn_sal_serial_console_init.
678 *
679 */
680static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
681{
682 unsigned long flags;
683
684 if (!port)
685 return;
686
687 DPRINTF("sn_console: about to switch to asynchronous console\n");
688
689 /* without early_printk, we may be invoked late enough to race
690 * with other cpus doing console IO at this point, however
691 * console interrupts will never be enabled */
692 spin_lock_irqsave(&port->sc_port.lock, flags);
693
694 /* early_printk invocation may have done this for us */
695 if (!port->sc_ops)
696 port->sc_ops = &poll_ops;
697
698 /* we can't turn on the console interrupt (as request_irq
699 * calls kmalloc, which isn't set up yet), so we rely on a
700 * timer to poll for input and push data from the console
701 * buffer.
702 */
703 init_timer(&port->sc_timer);
704 port->sc_timer.function = sn_sal_timer_poll;
705 port->sc_timer.data = (unsigned long)port;
706
707 if (IS_RUNNING_ON_SIMULATOR())
708 port->sc_interrupt_timeout = 6;
709 else {
710 /* 960cps / 16 char FIFO = 60HZ
711 * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */
712 port->sc_interrupt_timeout =
713 HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS;
714 }
715 mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout);
716
717 port->sc_is_asynch = 1;
718 spin_unlock_irqrestore(&port->sc_port.lock, flags);
719}
720
721/**
722 * sn_sal_switch_to_interrupts - Switch to interrupt driven mode
723 * @port: Our sn_cons_port (which contains the uart port)
724 *
725 * In sn_sal_module_init, after we're registered with serial core and
726 * the port is added, this function is called to switch us to interrupt
727 * mode. We were previously in asynch/polling mode (using init_timer).
728 *
729 * We attempt to switch to interrupt mode here by calling
Pat Gefref70c81d2007-03-07 20:41:29 -0800730 * request_irq. If that works out, we enable receive interrupts.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731 */
732static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
733{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734 unsigned long flags;
735
Pat Gefref70c81d2007-03-07 20:41:29 -0800736 if (port) {
737 DPRINTF("sn_console: switching to interrupt driven console\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700738
Pat Gefref70c81d2007-03-07 20:41:29 -0800739 if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
740 IRQF_DISABLED | IRQF_SHARED,
741 "SAL console driver", port) >= 0) {
742 spin_lock_irqsave(&port->sc_port.lock, flags);
743 port->sc_port.irq = SGI_UART_VECTOR;
744 port->sc_ops = &intr_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745
Pat Gefref70c81d2007-03-07 20:41:29 -0800746 /* turn on receive interrupts */
747 ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
748 spin_unlock_irqrestore(&port->sc_port.lock, flags);
749 }
750 else {
751 printk(KERN_INFO
752 "sn_console: console proceeding in polled mode\n");
753 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700754 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755}
756
757/*
758 * Kernel console definitions
759 */
760
761static void sn_sal_console_write(struct console *, const char *, unsigned);
Jes Sorensen17e0c7c2007-07-15 23:42:02 -0700762static int sn_sal_console_setup(struct console *, char *);
Andreas Schwab434498d2005-05-01 08:59:12 -0700763static struct uart_driver sal_console_uart;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700764extern struct tty_driver *uart_console_device(struct console *, int *);
765
766static struct console sal_console = {
767 .name = DEVICE_NAME,
768 .write = sn_sal_console_write,
769 .device = uart_console_device,
770 .setup = sn_sal_console_setup,
771 .index = -1, /* unspecified */
772 .data = &sal_console_uart,
773};
774
775#define SAL_CONSOLE &sal_console
776
Andreas Schwab434498d2005-05-01 08:59:12 -0700777static struct uart_driver sal_console_uart = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778 .owner = THIS_MODULE,
779 .driver_name = "sn_console",
780 .dev_name = DEVICE_NAME,
781 .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */
782 .minor = 0,
783 .nr = 1, /* one port */
784 .cons = SAL_CONSOLE,
785};
786
787/**
788 * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core
789 *
790 * Before this is called, we've been printing kernel messages in a special
791 * early mode not making use of the serial core infrastructure. When our
792 * driver is loaded for real, we register the driver and port with serial
793 * core and try to enable interrupt driven mode.
794 *
795 */
796static int __init sn_sal_module_init(void)
797{
798 int retval;
799
800 if (!ia64_platform_is("sn2"))
Bjorn Helgaasf032f902006-03-03 15:34:34 -0700801 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802
803 printk(KERN_INFO "sn_console: Console driver init\n");
804
805 if (USE_DYNAMIC_MINOR == 1) {
806 misc.minor = MISC_DYNAMIC_MINOR;
807 misc.name = DEVICE_NAME_DYNAMIC;
808 retval = misc_register(&misc);
809 if (retval != 0) {
Jes Sorensend171e512006-01-17 13:05:12 -0500810 printk(KERN_WARNING "Failed to register console "
811 "device using misc_register.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700812 return -ENODEV;
813 }
814 sal_console_uart.major = MISC_MAJOR;
815 sal_console_uart.minor = misc.minor;
816 } else {
817 sal_console_uart.major = DEVICE_MAJOR;
818 sal_console_uart.minor = DEVICE_MINOR;
819 }
820
821 /* We register the driver and the port before switching to interrupts
822 * or async above so the proper uart structures are populated */
823
824 if (uart_register_driver(&sal_console_uart) < 0) {
825 printk
826 ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n",
827 __LINE__);
828 return -ENODEV;
829 }
830
831 spin_lock_init(&sal_console_port.sc_port.lock);
832
833 /* Setup the port struct with the minimum needed */
834 sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */
835 sal_console_port.sc_port.type = PORT_16550A;
836 sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS;
837 sal_console_port.sc_port.ops = &sn_console_ops;
838 sal_console_port.sc_port.line = 0;
839
840 if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) {
841 /* error - not sure what I'd do - so I'll do nothing */
842 printk(KERN_ERR "%s: unable to add port\n", __FUNCTION__);
843 }
844
845 /* when this driver is compiled in, the console initialization
846 * will have already switched us into asynchronous operation
847 * before we get here through the module initcalls */
848 if (!sal_console_port.sc_is_asynch) {
849 sn_sal_switch_to_asynch(&sal_console_port);
850 }
851
852 /* at this point (module_init) we can try to turn on interrupts */
853 if (!IS_RUNNING_ON_SIMULATOR()) {
854 sn_sal_switch_to_interrupts(&sal_console_port);
855 }
856 sn_process_input = 1;
857 return 0;
858}
859
860/**
861 * sn_sal_module_exit - When we're unloaded, remove the driver/port
862 *
863 */
864static void __exit sn_sal_module_exit(void)
865{
866 del_timer_sync(&sal_console_port.sc_timer);
867 uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port);
868 uart_unregister_driver(&sal_console_uart);
869 misc_deregister(&misc);
870}
871
872module_init(sn_sal_module_init);
873module_exit(sn_sal_module_exit);
874
875/**
876 * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required
877 * @puts_raw : puts function to do the writing
878 * @s: input string
879 * @count: length
880 *
881 * We need a \r ahead of every \n for direct writes through
882 * ia64_sn_console_putb (what sal_puts_raw below actually does).
883 *
884 */
885
886static void puts_raw_fixed(int (*puts_raw) (const char *s, int len),
887 const char *s, int count)
888{
889 const char *s1;
890
891 /* Output '\r' before each '\n' */
892 while ((s1 = memchr(s, '\n', count)) != NULL) {
893 puts_raw(s, s1 - s);
894 puts_raw("\r\n", 2);
895 count -= s1 + 1 - s;
896 s = s1 + 1;
897 }
898 puts_raw(s, count);
899}
900
901/**
902 * sn_sal_console_write - Print statements before serial core available
903 * @console: Console to operate on - we ignore since we have just one
904 * @s: String to send
905 * @count: length
906 *
907 * This is referenced in the console struct. It is used for early
908 * console printing before we register with serial core and for things
909 * such as kdb. The console_lock must be held when we get here.
910 *
911 * This function has some code for trying to print output even if the lock
912 * is held. We try to cover the case where a lock holder could have died.
913 * We don't use this special case code if we're not registered with serial
914 * core yet. After we're registered with serial core, the only time this
915 * function would be used is for high level kernel output like magic sys req,
916 * kdb, and printk's.
917 */
918static void
919sn_sal_console_write(struct console *co, const char *s, unsigned count)
920{
921 unsigned long flags = 0;
922 struct sn_cons_port *port = &sal_console_port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700923 static int stole_lock = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700924
925 BUG_ON(!port->sc_is_asynch);
926
927 /* We can't look at the xmit buffer if we're not registered with serial core
928 * yet. So only do the fancy recovery after registering
929 */
Jes Sorensend171e512006-01-17 13:05:12 -0500930 if (!port->sc_port.info) {
931 /* Not yet registered with serial core - simple case */
932 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
933 return;
934 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700935
Jes Sorensend171e512006-01-17 13:05:12 -0500936 /* somebody really wants this output, might be an
937 * oops, kdb, panic, etc. make sure they get it. */
938 if (spin_is_locked(&port->sc_port.lock)) {
939 int lhead = port->sc_port.info->xmit.head;
940 int ltail = port->sc_port.info->xmit.tail;
941 int counter, got_lock = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942
Jes Sorensend171e512006-01-17 13:05:12 -0500943 /*
944 * We attempt to determine if someone has died with the
945 * lock. We wait ~20 secs after the head and tail ptrs
946 * stop moving and assume the lock holder is not functional
947 * and plow ahead. If the lock is freed within the time out
948 * period we re-get the lock and go ahead normally. We also
949 * remember if we have plowed ahead so that we don't have
950 * to wait out the time out period again - the asumption
951 * is that we will time out again.
952 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700953
Jes Sorensend171e512006-01-17 13:05:12 -0500954 for (counter = 0; counter < 150; mdelay(125), counter++) {
955 if (!spin_is_locked(&port->sc_port.lock)
956 || stole_lock) {
957 if (!stole_lock) {
958 spin_lock_irqsave(&port->sc_port.lock,
959 flags);
960 got_lock = 1;
961 }
962 break;
963 } else {
964 /* still locked */
965 if ((lhead != port->sc_port.info->xmit.head)
966 || (ltail !=
967 port->sc_port.info->xmit.tail)) {
968 lhead =
969 port->sc_port.info->xmit.head;
970 ltail =
971 port->sc_port.info->xmit.tail;
972 counter = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700973 }
974 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700975 }
Jes Sorensend171e512006-01-17 13:05:12 -0500976 /* flush anything in the serial core xmit buffer, raw */
977 sn_transmit_chars(port, 1);
978 if (got_lock) {
979 spin_unlock_irqrestore(&port->sc_port.lock, flags);
980 stole_lock = 0;
981 } else {
982 /* fell thru */
983 stole_lock = 1;
984 }
985 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
986 } else {
987 stole_lock = 0;
988 spin_lock_irqsave(&port->sc_port.lock, flags);
989 sn_transmit_chars(port, 1);
990 spin_unlock_irqrestore(&port->sc_port.lock, flags);
991
Linus Torvalds1da177e2005-04-16 15:20:36 -0700992 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
993 }
994}
995
996
997/**
998 * sn_sal_console_setup - Set up console for early printing
999 * @co: Console to work with
1000 * @options: Options to set
1001 *
1002 * Altix console doesn't do anything with baud rates, etc, anyway.
1003 *
1004 * This isn't required since not providing the setup function in the
1005 * console struct is ok. However, other patches like KDB plop something
1006 * here so providing it is easier.
1007 *
1008 */
Jes Sorensen17e0c7c2007-07-15 23:42:02 -07001009static int sn_sal_console_setup(struct console *co, char *options)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001010{
1011 return 0;
1012}
1013
1014/**
1015 * sn_sal_console_write_early - simple early output routine
1016 * @co - console struct
1017 * @s - string to print
1018 * @count - count
1019 *
1020 * Simple function to provide early output, before even
1021 * sn_sal_serial_console_init is called. Referenced in the
1022 * console struct registerd in sn_serial_console_early_setup.
1023 *
1024 */
1025static void __init
1026sn_sal_console_write_early(struct console *co, const char *s, unsigned count)
1027{
1028 puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count);
1029}
1030
1031/* Used for very early console printing - again, before
1032 * sn_sal_serial_console_init is run */
1033static struct console sal_console_early __initdata = {
1034 .name = "sn_sal",
1035 .write = sn_sal_console_write_early,
1036 .flags = CON_PRINTBUFFER,
1037 .index = -1,
1038};
1039
1040/**
1041 * sn_serial_console_early_setup - Sets up early console output support
1042 *
1043 * Register a console early on... This is for output before even
1044 * sn_sal_serial_cosnole_init is called. This function is called from
1045 * setup.c. This allows us to do really early polled writes. When
1046 * sn_sal_serial_console_init is called, this console is unregistered
1047 * and a new one registered.
1048 */
1049int __init sn_serial_console_early_setup(void)
1050{
1051 if (!ia64_platform_is("sn2"))
1052 return -1;
1053
1054 sal_console_port.sc_ops = &poll_ops;
Keith Owens71841b82005-07-30 17:52:00 -07001055 spin_lock_init(&sal_console_port.sc_port.lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001056 early_sn_setup(); /* Find SAL entry points */
1057 register_console(&sal_console_early);
1058
1059 return 0;
1060}
1061
1062/**
1063 * sn_sal_serial_console_init - Early console output - set up for register
1064 *
1065 * This function is called when regular console init happens. Because we
1066 * support even earlier console output with sn_serial_console_early_setup
1067 * (called from setup.c directly), this function unregisters the really
1068 * early console.
1069 *
1070 * Note: Even if setup.c doesn't register sal_console_early, unregistering
1071 * it here doesn't hurt anything.
1072 *
1073 */
1074static int __init sn_sal_serial_console_init(void)
1075{
1076 if (ia64_platform_is("sn2")) {
1077 sn_sal_switch_to_asynch(&sal_console_port);
1078 DPRINTF("sn_sal_serial_console_init : register console\n");
1079 register_console(&sal_console);
1080 unregister_console(&sal_console_early);
1081 }
1082 return 0;
1083}
1084
1085console_initcall(sn_sal_serial_console_init);