blob: c851ef49779566a970e8e64c15385e2cf6f80033 [file] [log] [blame]
Yang, Bo24541f92008-08-10 12:42:39 -07001
21 Release Date : Thur.July. 24 11:41:51 PST 2008 -
3 (emaild-id:megaraidlinux@lsi.com)
4 Sumant Patro
5 Bo Yang
6
72 Current Version : 00.00.04.01
83 Older Version : 00.00.03.22
9
101. Add the new controller (0078, 0079) support to the driver
11 Those controllers are LSI's next generatation(gen2) SAS controllers.
12
131 Release Date : Mon.June. 23 10:12:45 PST 2008 -
14 (emaild-id:megaraidlinux@lsi.com)
15 Sumant Patro
16 Bo Yang
17
182 Current Version : 00.00.03.22
193 Older Version : 00.00.03.20
20
211. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
222. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
23
bo yang127ce9712008-04-29 03:55:33 -0400241 Release Date : Mon. March 10 11:02:31 PDT 2008 -
25 (emaild-id:megaraidlinux@lsi.com)
26 Sumant Patro
27 Bo Yang
28
292 Current Version : 00.00.03.20-RC1
303 Older Version : 00.00.03.16
31
321. Rollback the sense info implementation
33 Sense buffer ptr data type in the ioctl path is reverted back
34 to u32 * as in previous versions of driver.
35
362. Fixed the driver frame count.
37 When Driver sent wrong frame count to firmware. As this
38 particular command is sent to drive, FW is seeing continuous
39 chip resets and so the command will timeout.
40
413. Add the new controller(1078DE) support to the driver
42 and Increase the max_wait to 60 from 10 in the controller
43 operational status. With this max_wait increase, driver will
44 make sure the FW will finish the pending cmd for KDUMP case.
45
bo yangf28cd7c2007-11-09 04:44:56 -0500461 Release Date : Thur. Nov. 07 16:30:43 PST 2007 -
47 (emaild-id:megaraidlinux@lsi.com)
48 Sumant Patro
49 Bo Yang
50
512 Current Version : 00.00.03.16
523 Older Version : 00.00.03.15
53
541. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
55 a max of 60 seconds to respond to the INIT cmd.
56
571 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
58 (emaild-id:megaraidlinux@lsi.com)
59 Sumant Patro
60 Bo Yang
61
622 Current Version : 00.00.03.15
633 Older Version : 00.00.03.14
64
651. Added module parameter "poll_mode_io" to support for "polling"
66 (reduced interrupt operation). In this mode, IO completion
67 interrupts are delayed. At the end of initiating IOs, the
68 driver schedules for cmd completion if there are pending cmds
69 to be completed. A timer-based interrupt has also been added
70 to prevent IO completion processing from being delayed
71 indefinitely in the case that no new IOs are initiated.
72
731 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
74 (emaild-id:megaraidlinux@lsi.com)
75 Sumant Patro
76 Bo Yang
77
782 Current Version : 00.00.03.14
793 Older Version : 00.00.03.13
80
811. Setting the max_sectors_per_req based on max SGL supported by the
82 FW. Prior versions calculated this value from controller info
83 (max_sectors_1, max_sectors_2). For certain controllers/FW,
84 this was resulting in a value greater than max SGL supported
85 by the FW. Issue was first reported by users running LUKS+XFS
86 with megaraid_sas. Thanks to RB for providing the logs and
87 duplication steps that helped to get to the root cause of the
88 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from
89 10. FW may take a max of 60 seconds to respond to the INIT
90 cmd.
91
921 Release Date : Fri. June. 15 16:30:43 PST 2007 -
93 (emaild-id:megaraidlinux@lsi.com)
94 Sumant Patro
95 Bo Yang
96
972 Current Version : 00.00.03.13
983 Older Version : 00.00.03.12
99
1001. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io.
101
102On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote:
103It looks like megaraid_sas at least needs this to throttle its commands
104> as they begin to time out. The code keeps the existing transport
105> template use of eh_timed_out (and allows the transport to override the
106> host if they both have this callback).
107>
108> James
109
1101 Release Date : Sat May. 12 16:30:43 PST 2007 -
111 (emaild-id:megaraidlinux@lsi.com)
112 Sumant Patro
113 Bo Yang
114
1152 Current Version : 00.00.03.12
1163 Older Version : 00.00.03.11
117
1181. When MegaSAS driver receives reset call from OS, driver waits in reset
119routine for max 3 minutes for all pending command completion. Now driver will
120call completion routine every 5 seconds from the reset routine instead of
121waiting for depending on cmd completion from isr path.
122
1231 Release Date : Mon Apr. 30 10:25:52 PST 2007 -
124 (emaild-id:megaraidlinux@lsi.com)
125 Sumant Patro
126 Bo Yang
127
1282 Current Version : 00.00.03.11
1293 Older Version : 00.00.03.09
130
131 1. Memory Manager for IOCTL removed for 2.6 kernels.
132 pci_alloc_consistent replaced by dma_alloc_coherent. With this
133 change there is no need of memory manager in the driver code
134
135 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote:
136 > I suspect all this horror is due to stupidity in the DMA API.
137 >
138 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas
139 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy
140 > to use GFP_KERNEL.
141 >
142 > I bet this fixes it
143
144 It does, but the DMA API was expanded to cope with this exact case, so
145 use dma_alloc_coherent() directly in the megaraid code instead. The dev
146 is just &pci_dev->dev.
147
148 James <James.Bottomley@SteelEye.com>
149
150 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver.
151 4. Hibernation support added
152 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed.
153
1541 Release Date : Fri Feb. 09 14:36:28 PST 2007 -
155 (emaild-id:megaraidlinux@lsi.com)
156 Sumant Patro
157 Bo Yang
158
1592 Current Version : 00.00.03.09
1603 Older Version : 00.00.03.08
161
162i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
163
164 The driver now waits for 10 seconds to elapse instead of 5 (as in
165 previous release) to resume IO.
166
1671 Release Date : Mon Feb. 05 11:35:24 PST 2007 -
168 (emaild-id:megaraidlinux@lsi.com)
169 Sumant Patro
170 Bo Yang
1712 Current Version : 00.00.03.08
1723 Older Version : 00.00.03.07
173
174i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
175
176 Fix: The driver is now throttling IO.
177 Checks added in megasas_queue_command to know if FW is able to
178 process commands within timeout period. If number of retries
179 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is
180 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed
181 from the time cmds were last sent to FW.
182
183ii. FW enables WCE bit in Mode Sense cmd for drives that are configured
184 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical
185 Disks are exposed with WCE=1. User is advised to enable Write Back
186 mode only when the controller has battery backup. At this time
187 Synhronize cache is not supported by the FW. Driver will short-cycle
188 the cmd and return sucess without sending down to FW.
189
1901 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
191 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
1922 Current Version : 00.00.03.07
1933 Older Version : 00.00.03.06
194
195i. bios_param entry added in scsi_host_template that returns disk geometry
196 information.
197
1981 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
1992 Current Version : 00.00.03.06
2003 Older Version : 00.00.03.05
201
2021. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
2032. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
204 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
Sumant Patroe4a082c2006-05-30 12:03:37 -0700205
Sumant Patro2a3681e2006-10-03 13:19:21 -07002061 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2072 Current Version : 00.00.03.05
2083 Older Version : 00.00.03.04
209
210i. PCI_DEVICE macro used
211
212 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
213
214 - Henrik Kretzschmar <henne@nachtwindheim.de>
215ii. All compiler warnings removed
216iii. megasas_ctrl_info struct reverted to 3.02 release
217iv. Default value of megasas_dbg_lvl set to 0
218v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
219vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of
220 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
221 Eric Sesterhenn
222
2231 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2242 Current Version : 00.00.03.04
2253 Older Version : 00.00.03.03
226
227i. Added Reboot notify
228ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
229 as Max Cmds FW can support
230
2311 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2322 Current Version : 00.00.03.03
2333 Older Version : 00.00.03.02
234
235i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
236 New varible added to set dbg level.
237ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078
238iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
239 3 SGE for 32 bit SGL
240iv. Tasklet added for cmd completion
241v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
242vi. megasas_ctrl_prop structure updated (based on FW struct)
243vii. Added print : FW now in Ready State during initialization
244
2451 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2462 Current Version : 00.00.03.02
2473 Older Version : 00.00.03.01
248
249i. Added FW tranistion state for Hotplug scenario
250
Sumant Patro0e989362006-06-20 15:32:37 -07002511 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2522 Current Version : 00.00.03.01
2533 Older Version : 00.00.02.04
254
255i. Added support for ZCR controller.
256
257 New device id 0x413 added.
258
259ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
260
261 Interrupt is enabled after required initialization is over.
262 This is done to ensure that driver is ready to handle interrupts when
263 it is generated by the controller.
264
265 -Sumant Patro <Sumant.Patro@lsil.com>
266
Sumant Patroe4a082c2006-05-30 12:03:37 -07002671 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2682 Current Version : 00.00.02.04
2693 Older Version : 00.00.02.04
270
271i. Remove superflous instance_lock
272
273 gets rid of the otherwise superflous instance_lock and avoids an unsave
274 unsynchronized access in the error handler.
275
276 - Christoph Hellwig <hch@lst.de>
277
278
Sumant Patrof9876f02006-02-03 15:34:35 -08002791 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2802 Current Version : 00.00.02.04
2813 Older Version : 00.00.02.04
282
283i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
284 During initialization, depending on the device id, the template members
285 are initialized with function pointers specific to the ppc or
286 xscale controllers.
287
288 -Sumant Patro <Sumant.Patro@lsil.com>
289
Joshua Giles122da302006-02-03 15:34:17 -08002901 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
291 <Sumant.Patro@lsil.com>
2922 Current Version : 00.00.02.04
2933 Older Version : 00.00.02.02
294i. Register 16 byte CDB capability with scsi midlayer
295
296 "Ths patch properly registers the 16 byte command length capability of the
297 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
298 hardware supports 16 byte CDB's."
299
300 -Joshua Giles <joshua_giles@dell.com>
301
Sumant Patro1341c932006-01-25 12:02:40 -08003021 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
3032 Current Version : 00.00.02.02
3043 Older Version : 00.00.02.01
305
306i. New template defined to represent each family of controllers (identified by processor used).
307 The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
308
309 -Sumant Patro <Sumant.Patro@lsil.com>
310
Sumant Patrocb59aa62006-01-25 11:53:25 -08003111 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
3122 Current Version : 00.00.02.00-rc4
3133 Older Version : 00.00.02.01
314
315i. Code reorganized to remove code duplication in megasas_build_cmd.
316
317 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
318
319 - Christoph Hellwig <hch@lst.de>
320
321ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
322
323 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
324
325 - Christoph Hellwig <hch@lst.de>