blob: 117fccf7934a73a3c4098d809ff72bb9bef8006a [file] [log] [blame]
Steffen Trumtrar88b613e2013-05-30 09:50:12 +02001/*
2 * Driver for PCA9685 16-channel 12-bit PWM LED controller
3 *
4 * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
Clemens Gruber01ec8472015-07-23 17:19:02 +02005 * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
Steffen Trumtrar88b613e2013-05-30 09:50:12 +02006 *
7 * based on the pwm-twl-led.c driver
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License version 2 as published by
11 * the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program. If not, see <http://www.gnu.org/licenses/>.
20 */
21
Andy Shevchenko912b8432015-10-07 13:18:49 +030022#include <linux/acpi.h>
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020023#include <linux/i2c.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
Andy Shevchenko912b8432015-10-07 13:18:49 +030026#include <linux/property.h>
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020027#include <linux/pwm.h>
28#include <linux/regmap.h>
29#include <linux/slab.h>
Clemens Gruber01ec8472015-07-23 17:19:02 +020030#include <linux/delay.h>
31
32/*
33 * Because the PCA9685 has only one prescaler per chip, changing the period of
34 * one channel affects the period of all 16 PWM outputs!
35 * However, the ratio between each configured duty cycle and the chip-wide
36 * period remains constant, because the OFF time is set in proportion to the
37 * counter range.
38 */
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020039
40#define PCA9685_MODE1 0x00
41#define PCA9685_MODE2 0x01
42#define PCA9685_SUBADDR1 0x02
43#define PCA9685_SUBADDR2 0x03
44#define PCA9685_SUBADDR3 0x04
45#define PCA9685_ALLCALLADDR 0x05
46#define PCA9685_LEDX_ON_L 0x06
47#define PCA9685_LEDX_ON_H 0x07
48#define PCA9685_LEDX_OFF_L 0x08
49#define PCA9685_LEDX_OFF_H 0x09
50
51#define PCA9685_ALL_LED_ON_L 0xFA
52#define PCA9685_ALL_LED_ON_H 0xFB
53#define PCA9685_ALL_LED_OFF_L 0xFC
54#define PCA9685_ALL_LED_OFF_H 0xFD
55#define PCA9685_PRESCALE 0xFE
56
Clemens Gruber01ec8472015-07-23 17:19:02 +020057#define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */
58#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */
59
60#define PCA9685_COUNTER_RANGE 4096
61#define PCA9685_DEFAULT_PERIOD 5000000 /* Default period_ns = 1/200 Hz */
62#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */
63
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020064#define PCA9685_NUMREGS 0xFF
65#define PCA9685_MAXCHAN 0x10
66
67#define LED_FULL (1 << 4)
Clemens Gruber01ec8472015-07-23 17:19:02 +020068#define MODE1_RESTART (1 << 7)
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020069#define MODE1_SLEEP (1 << 4)
70#define MODE2_INVRT (1 << 4)
71#define MODE2_OUTDRV (1 << 2)
72
73#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N)))
74#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N)))
75#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
76#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))
77
78struct pca9685 {
79 struct pwm_chip chip;
80 struct regmap *regmap;
81 int active_cnt;
Clemens Gruber01ec8472015-07-23 17:19:02 +020082 int duty_ns;
83 int period_ns;
Steffen Trumtrar88b613e2013-05-30 09:50:12 +020084};
85
86static inline struct pca9685 *to_pca(struct pwm_chip *chip)
87{
88 return container_of(chip, struct pca9685, chip);
89}
90
91static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
92 int duty_ns, int period_ns)
93{
94 struct pca9685 *pca = to_pca(chip);
95 unsigned long long duty;
96 unsigned int reg;
Clemens Gruber01ec8472015-07-23 17:19:02 +020097 int prescale;
98
99 if (period_ns != pca->period_ns) {
100 prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns,
101 PCA9685_COUNTER_RANGE * 1000) - 1;
102
103 if (prescale >= PCA9685_PRESCALE_MIN &&
104 prescale <= PCA9685_PRESCALE_MAX) {
105 /* Put chip into sleep mode */
106 regmap_update_bits(pca->regmap, PCA9685_MODE1,
107 MODE1_SLEEP, MODE1_SLEEP);
108
109 /* Change the chip-wide output frequency */
110 regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
111
112 /* Wake the chip up */
113 regmap_update_bits(pca->regmap, PCA9685_MODE1,
114 MODE1_SLEEP, 0x0);
115
116 /* Wait 500us for the oscillator to be back up */
117 udelay(500);
118
119 pca->period_ns = period_ns;
120
121 /*
122 * If the duty cycle did not change, restart PWM with
123 * the same duty cycle to period ratio and return.
124 */
125 if (duty_ns == pca->duty_ns) {
126 regmap_update_bits(pca->regmap, PCA9685_MODE1,
127 MODE1_RESTART, 0x1);
128 return 0;
129 }
130 } else {
131 dev_err(chip->dev,
132 "prescaler not set: period out of bounds!\n");
133 return -EINVAL;
134 }
135 }
136
137 pca->duty_ns = duty_ns;
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200138
139 if (duty_ns < 1) {
140 if (pwm->hwpwm >= PCA9685_MAXCHAN)
141 reg = PCA9685_ALL_LED_OFF_H;
142 else
143 reg = LED_N_OFF_H(pwm->hwpwm);
144
145 regmap_write(pca->regmap, reg, LED_FULL);
146
147 return 0;
148 }
149
150 if (duty_ns == period_ns) {
Clemens Gruber4a627b52015-07-23 17:19:01 +0200151 /* Clear both OFF registers */
152 if (pwm->hwpwm >= PCA9685_MAXCHAN)
153 reg = PCA9685_ALL_LED_OFF_L;
154 else
155 reg = LED_N_OFF_L(pwm->hwpwm);
156
157 regmap_write(pca->regmap, reg, 0x0);
158
159 if (pwm->hwpwm >= PCA9685_MAXCHAN)
160 reg = PCA9685_ALL_LED_OFF_H;
161 else
162 reg = LED_N_OFF_H(pwm->hwpwm);
163
164 regmap_write(pca->regmap, reg, 0x0);
165
166 /* Set the full ON bit */
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200167 if (pwm->hwpwm >= PCA9685_MAXCHAN)
168 reg = PCA9685_ALL_LED_ON_H;
169 else
170 reg = LED_N_ON_H(pwm->hwpwm);
171
172 regmap_write(pca->regmap, reg, LED_FULL);
173
174 return 0;
175 }
176
Clemens Gruber01ec8472015-07-23 17:19:02 +0200177 duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns;
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200178 duty = DIV_ROUND_UP_ULL(duty, period_ns);
179
180 if (pwm->hwpwm >= PCA9685_MAXCHAN)
181 reg = PCA9685_ALL_LED_OFF_L;
182 else
183 reg = LED_N_OFF_L(pwm->hwpwm);
184
185 regmap_write(pca->regmap, reg, (int)duty & 0xff);
186
187 if (pwm->hwpwm >= PCA9685_MAXCHAN)
188 reg = PCA9685_ALL_LED_OFF_H;
189 else
190 reg = LED_N_OFF_H(pwm->hwpwm);
191
192 regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
193
Clemens Gruber4a627b52015-07-23 17:19:01 +0200194 /* Clear the full ON bit, otherwise the set OFF time has no effect */
195 if (pwm->hwpwm >= PCA9685_MAXCHAN)
196 reg = PCA9685_ALL_LED_ON_H;
197 else
198 reg = LED_N_ON_H(pwm->hwpwm);
199
200 regmap_write(pca->regmap, reg, 0);
201
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200202 return 0;
203}
204
205static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
206{
207 struct pca9685 *pca = to_pca(chip);
208 unsigned int reg;
209
210 /*
211 * The PWM subsystem does not support a pre-delay.
212 * So, set the ON-timeout to 0
213 */
214 if (pwm->hwpwm >= PCA9685_MAXCHAN)
215 reg = PCA9685_ALL_LED_ON_L;
216 else
217 reg = LED_N_ON_L(pwm->hwpwm);
218
219 regmap_write(pca->regmap, reg, 0);
220
221 if (pwm->hwpwm >= PCA9685_MAXCHAN)
222 reg = PCA9685_ALL_LED_ON_H;
223 else
224 reg = LED_N_ON_H(pwm->hwpwm);
225
226 regmap_write(pca->regmap, reg, 0);
227
228 /*
229 * Clear the full-off bit.
230 * It has precedence over the others and must be off.
231 */
232 if (pwm->hwpwm >= PCA9685_MAXCHAN)
233 reg = PCA9685_ALL_LED_OFF_H;
234 else
235 reg = LED_N_OFF_H(pwm->hwpwm);
236
237 regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
238
239 return 0;
240}
241
242static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
243{
244 struct pca9685 *pca = to_pca(chip);
245 unsigned int reg;
246
247 if (pwm->hwpwm >= PCA9685_MAXCHAN)
248 reg = PCA9685_ALL_LED_OFF_H;
249 else
250 reg = LED_N_OFF_H(pwm->hwpwm);
251
252 regmap_write(pca->regmap, reg, LED_FULL);
253
254 /* Clear the LED_OFF counter. */
255 if (pwm->hwpwm >= PCA9685_MAXCHAN)
256 reg = PCA9685_ALL_LED_OFF_L;
257 else
258 reg = LED_N_OFF_L(pwm->hwpwm);
259
260 regmap_write(pca->regmap, reg, 0x0);
261}
262
263static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
264{
265 struct pca9685 *pca = to_pca(chip);
266
267 if (pca->active_cnt++ == 0)
268 return regmap_update_bits(pca->regmap, PCA9685_MODE1,
269 MODE1_SLEEP, 0x0);
270
271 return 0;
272}
273
274static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
275{
276 struct pca9685 *pca = to_pca(chip);
277
278 if (--pca->active_cnt == 0)
279 regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
Axel Linfed1bf82013-06-20 01:27:27 +0800280 MODE1_SLEEP);
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200281}
282
283static const struct pwm_ops pca9685_pwm_ops = {
284 .enable = pca9685_pwm_enable,
285 .disable = pca9685_pwm_disable,
286 .config = pca9685_pwm_config,
287 .request = pca9685_pwm_request,
288 .free = pca9685_pwm_free,
Thierry Reding3dd0a902013-06-12 13:18:29 +0200289 .owner = THIS_MODULE,
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200290};
291
Krzysztof Kozlowskic456fbb2015-02-24 10:40:24 +0100292static const struct regmap_config pca9685_regmap_i2c_config = {
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200293 .reg_bits = 8,
294 .val_bits = 8,
295 .max_register = PCA9685_NUMREGS,
296 .cache_type = REGCACHE_NONE,
297};
298
299static int pca9685_pwm_probe(struct i2c_client *client,
300 const struct i2c_device_id *id)
301{
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200302 struct pca9685 *pca;
303 int ret;
304 int mode2;
305
306 pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
307 if (!pca)
308 return -ENOMEM;
309
310 pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
311 if (IS_ERR(pca->regmap)) {
312 ret = PTR_ERR(pca->regmap);
313 dev_err(&client->dev, "Failed to initialize register map: %d\n",
314 ret);
315 return ret;
316 }
Clemens Gruber01ec8472015-07-23 17:19:02 +0200317 pca->duty_ns = 0;
318 pca->period_ns = PCA9685_DEFAULT_PERIOD;
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200319
320 i2c_set_clientdata(client, pca);
321
322 regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
323
Andy Shevchenko912b8432015-10-07 13:18:49 +0300324 if (device_property_read_bool(&client->dev, "invert"))
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200325 mode2 |= MODE2_INVRT;
326 else
327 mode2 &= ~MODE2_INVRT;
328
Andy Shevchenko912b8432015-10-07 13:18:49 +0300329 if (device_property_read_bool(&client->dev, "open-drain"))
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200330 mode2 &= ~MODE2_OUTDRV;
331 else
332 mode2 |= MODE2_OUTDRV;
333
334 regmap_write(pca->regmap, PCA9685_MODE2, mode2);
335
336 /* clear all "full off" bits */
337 regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
338 regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
339
340 pca->chip.ops = &pca9685_pwm_ops;
341 /* add an extra channel for ALL_LED */
342 pca->chip.npwm = PCA9685_MAXCHAN + 1;
343
344 pca->chip.dev = &client->dev;
345 pca->chip.base = -1;
346 pca->chip.can_sleep = true;
347
348 return pwmchip_add(&pca->chip);
349}
350
351static int pca9685_pwm_remove(struct i2c_client *client)
352{
353 struct pca9685 *pca = i2c_get_clientdata(client);
354
Axel Linfed1bf82013-06-20 01:27:27 +0800355 regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
356 MODE1_SLEEP);
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200357
358 return pwmchip_remove(&pca->chip);
359}
360
361static const struct i2c_device_id pca9685_id[] = {
362 { "pca9685", 0 },
363 { /* sentinel */ },
364};
365MODULE_DEVICE_TABLE(i2c, pca9685_id);
366
Andy Shevchenko912b8432015-10-07 13:18:49 +0300367#ifdef CONFIG_ACPI
368static const struct acpi_device_id pca9685_acpi_ids[] = {
369 { "INT3492", 0 },
370 { /* sentinel */ },
371};
372MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
373#endif
374
375#ifdef CONFIG_OF
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200376static const struct of_device_id pca9685_dt_ids[] = {
377 { .compatible = "nxp,pca9685-pwm", },
378 { /* sentinel */ }
379};
380MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
Andy Shevchenko912b8432015-10-07 13:18:49 +0300381#endif
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200382
383static struct i2c_driver pca9685_i2c_driver = {
384 .driver = {
385 .name = "pca9685-pwm",
Andy Shevchenko912b8432015-10-07 13:18:49 +0300386 .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
387 .of_match_table = of_match_ptr(pca9685_dt_ids),
Steffen Trumtrar88b613e2013-05-30 09:50:12 +0200388 },
389 .probe = pca9685_pwm_probe,
390 .remove = pca9685_pwm_remove,
391 .id_table = pca9685_id,
392};
393
394module_i2c_driver(pca9685_i2c_driver);
395
396MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
397MODULE_DESCRIPTION("PWM driver for PCA9685");
398MODULE_LICENSE("GPL");