blob: 565373ede2652a4b711a5f6a5a233847ba79ec85 [file] [log] [blame]
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +03001/*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2009 Nokia Corporation
5 *
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 */
23
24#ifndef __WL1271_CONF_H__
25#define __WL1271_CONF_H__
26
27enum {
28 CONF_HW_BIT_RATE_1MBPS = BIT(0),
29 CONF_HW_BIT_RATE_2MBPS = BIT(1),
30 CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
31 CONF_HW_BIT_RATE_6MBPS = BIT(3),
32 CONF_HW_BIT_RATE_9MBPS = BIT(4),
33 CONF_HW_BIT_RATE_11MBPS = BIT(5),
34 CONF_HW_BIT_RATE_12MBPS = BIT(6),
35 CONF_HW_BIT_RATE_18MBPS = BIT(7),
36 CONF_HW_BIT_RATE_22MBPS = BIT(8),
37 CONF_HW_BIT_RATE_24MBPS = BIT(9),
38 CONF_HW_BIT_RATE_36MBPS = BIT(10),
39 CONF_HW_BIT_RATE_48MBPS = BIT(11),
40 CONF_HW_BIT_RATE_54MBPS = BIT(12),
41 CONF_HW_BIT_RATE_MCS_0 = BIT(13),
42 CONF_HW_BIT_RATE_MCS_1 = BIT(14),
43 CONF_HW_BIT_RATE_MCS_2 = BIT(15),
44 CONF_HW_BIT_RATE_MCS_3 = BIT(16),
45 CONF_HW_BIT_RATE_MCS_4 = BIT(17),
46 CONF_HW_BIT_RATE_MCS_5 = BIT(18),
47 CONF_HW_BIT_RATE_MCS_6 = BIT(19),
48 CONF_HW_BIT_RATE_MCS_7 = BIT(20)
49};
50
51enum {
52 CONF_HW_RATE_INDEX_1MBPS = 0,
53 CONF_HW_RATE_INDEX_2MBPS = 1,
54 CONF_HW_RATE_INDEX_5_5MBPS = 2,
55 CONF_HW_RATE_INDEX_6MBPS = 3,
56 CONF_HW_RATE_INDEX_9MBPS = 4,
57 CONF_HW_RATE_INDEX_11MBPS = 5,
58 CONF_HW_RATE_INDEX_12MBPS = 6,
59 CONF_HW_RATE_INDEX_18MBPS = 7,
60 CONF_HW_RATE_INDEX_22MBPS = 8,
61 CONF_HW_RATE_INDEX_24MBPS = 9,
62 CONF_HW_RATE_INDEX_36MBPS = 10,
63 CONF_HW_RATE_INDEX_48MBPS = 11,
64 CONF_HW_RATE_INDEX_54MBPS = 12,
65 CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
66};
67
68struct conf_sg_settings {
69 /*
70 * Defines the PER threshold in PPM of the BT voice of which reaching
71 * this value will trigger raising the priority of the BT voice by
72 * the BT IP until next NFS sample interval time as defined in
73 * nfs_sample_interval.
74 *
75 * Unit: PER value in PPM (parts per million)
76 * #Error_packets / #Total_packets
77
78 * Range: u32
79 */
80 u32 per_threshold;
81
82 /*
83 * This value is an absolute time in micro-seconds to limit the
84 * maximum scan duration compensation while in SG
85 */
86 u32 max_scan_compensation_time;
87
88 /* Defines the PER threshold of the BT voice of which reaching this
89 * value will trigger raising the priority of the BT voice until next
90 * NFS sample interval time as defined in sample_interval.
91 *
92 * Unit: msec
93 * Range: 1-65000
94 */
95 u16 nfs_sample_interval;
96
97 /*
98 * Defines the load ratio for the BT.
99 * The WLAN ratio is: 100 - load_ratio
100 *
101 * Unit: Percent
102 * Range: 0-100
103 */
104 u8 load_ratio;
105
106 /*
107 * true - Co-ex is allowed to enter/exit P.S automatically and
108 * transparently to the host
109 *
110 * false - Co-ex is disallowed to enter/exit P.S and will trigger an
111 * event to the host to notify for the need to enter/exit P.S
112 * due to BT change state
113 *
114 */
115 u8 auto_ps_mode;
116
117 /*
118 * This parameter defines the compensation percentage of num of probe
119 * requests in case scan is initiated during BT voice/BT ACL
120 * guaranteed link.
121 *
122 * Unit: Percent
123 * Range: 0-255 (0 - No compensation)
124 */
125 u8 probe_req_compensation;
126
127 /*
128 * This parameter defines the compensation percentage of scan window
129 * size in case scan is initiated during BT voice/BT ACL Guaranteed
130 * link.
131 *
132 * Unit: Percent
133 * Range: 0-255 (0 - No compensation)
134 */
135 u8 scan_window_compensation;
136
137 /*
138 * Defines the antenna configuration.
139 *
140 * Range: 0 - Single Antenna; 1 - Dual Antenna
141 */
142 u8 antenna_config;
143
144 /*
145 * The percent out of the Max consecutive beacon miss roaming trigger
146 * which is the threshold for raising the priority of beacon
147 * reception.
148 *
149 * Range: 1-100
150 * N = MaxConsecutiveBeaconMiss
151 * P = coexMaxConsecutiveBeaconMissPrecent
152 * Threshold = MIN( N-1, round(N * P / 100))
153 */
154 u8 beacon_miss_threshold;
155
156 /*
157 * The RX rate threshold below which rate adaptation is assumed to be
158 * occurring at the AP which will raise priority for ACTIVE_RX and RX
159 * SP.
160 *
161 * Range: HW_BIT_RATE_*
162 */
163 u32 rate_adaptation_threshold;
164
165 /*
166 * The SNR above which the RX rate threshold indicating AP rate
167 * adaptation is valid
168 *
169 * Range: -128 - 127
170 */
171 s8 rate_adaptation_snr;
172};
173
Juuso Oikarinen8793f9b2009-10-13 12:47:40 +0300174enum conf_rx_queue_type {
175 CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */
176 CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
177};
178
179struct conf_rx_settings {
180 /*
181 * The maximum amount of time, in TU, before the
182 * firmware discards the MSDU.
183 *
184 * Range: 0 - 0xFFFFFFFF
185 */
186 u32 rx_msdu_life_time;
187
188 /*
189 * Packet detection threshold in the PHY.
190 *
191 * FIXME: details unknown.
192 */
193 u32 packet_detection_threshold;
194
195 /*
196 * The longest time the STA will wait to receive traffic from the AP
197 * after a PS-poll has been transmitted.
198 *
199 * Range: 0 - 200000
200 */
201 u16 ps_poll_timeout;
202 /*
203 * The longest time the STA will wait to receive traffic from the AP
204 * after a frame has been sent from an UPSD enabled queue.
205 *
206 * Range: 0 - 200000
207 */
208 u16 upsd_timeout;
209
210 /*
211 * The number of octets in an MPDU, below which an RTS/CTS
212 * handshake is not performed.
213 *
214 * Range: 0 - 4096
215 */
216 u16 rts_threshold;
217
218 /*
219 * The RX Clear Channel Assessment threshold in the PHY
220 * (the energy threshold).
221 *
222 * Range: ENABLE_ENERGY_D == 0x140A
223 * DISABLE_ENERGY_D == 0xFFEF
224 */
225 u16 rx_cca_threshold;
226
227 /*
228 * Occupied Rx mem-blocks number which requires interrupting the host
229 * (0 = no buffering, 0xffff = disabled).
230 *
231 * Range: u16
232 */
233 u16 irq_blk_threshold;
234
235 /*
236 * Rx packets number which requires interrupting the host
237 * (0 = no buffering).
238 *
239 * Range: u16
240 */
241 u16 irq_pkt_threshold;
242
243 /*
244 * Max time in msec the FW may delay RX-Complete interrupt.
245 *
246 * Range: 1 - 100
247 */
248 u16 irq_timeout;
249
250 /*
251 * The RX queue type.
252 *
253 * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
254 */
255 u8 queue_type;
256};
257
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300258#define CONF_TX_MAX_RATE_CLASSES 8
259
260#define CONF_TX_RATE_MASK_UNSPECIFIED 0
261#define CONF_TX_RATE_MASK_ALL 0x1eff
262#define CONF_TX_RATE_RETRY_LIMIT 10
263
264struct conf_tx_rate_class {
265
266 /*
267 * The rates enabled for this rate class.
268 *
269 * Range: CONF_HW_BIT_RATE_* bit mask
270 */
271 u32 enabled_rates;
272
273 /*
274 * The dot11 short retry limit used for TX retries.
275 *
276 * Range: u8
277 */
278 u8 short_retry_limit;
279
280 /*
281 * The dot11 long retry limit used for TX retries.
282 *
283 * Range: u8
284 */
285 u8 long_retry_limit;
286
287 /*
288 * Flags controlling the attributes of TX transmission.
289 *
290 * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
291 * when the total valid per-rate attempts have
292 * been exhausted; otherwise transmissions
293 * will continue at the lowest available rate
294 * until the appropriate one of the
295 * short_retry_limit, long_retry_limit,
296 * dot11_max_transmit_msdu_life_time, or
297 * max_tx_life_time, is exhausted.
298 * 1: Preamble Override - indicates if the preamble type
299 * should be used in TX.
300 * 2: Preamble Type - the type of the preamble to be used by
301 * the policy (0 - long preamble, 1 - short preamble.
302 */
303 u8 aflags;
304};
305
306#define CONF_TX_MAX_AC_COUNT 4
307
308/* Slot number setting to start transmission at PIFS interval */
309#define CONF_TX_AIFS_PIFS 1
310/* Slot number setting to start transmission at DIFS interval normal
311 * DCF access */
312#define CONF_TX_AIFS_DIFS 2
313
314
315enum conf_tx_ac {
316 CONF_TX_AC_BE = 0, /* best effort / legacy */
317 CONF_TX_AC_BK = 1, /* background */
318 CONF_TX_AC_VI = 2, /* video */
319 CONF_TX_AC_VO = 3, /* voice */
320 CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */
321 CONF_TX_AC_ANY_TID = 0x1f
322};
323
324struct conf_tx_ac_category {
325 /*
326 * The AC class identifier.
327 *
328 * Range: enum conf_tx_ac
329 */
330 u8 ac;
331
332 /*
333 * The contention window minimum size (in slots) for the access
334 * class.
335 *
336 * Range: u8
337 */
338 u8 cw_min;
339
340 /*
341 * The contention window maximum size (in slots) for the access
342 * class.
343 *
344 * Range: u8
345 */
346 u16 cw_max;
347
348 /*
349 * The AIF value (in slots) for the access class.
350 *
351 * Range: u8
352 */
353 u8 aifsn;
354
355 /*
356 * The TX Op Limit (in microseconds) for the access class.
357 *
358 * Range: u16
359 */
360 u16 tx_op_limit;
361};
362
363#define CONF_TX_MAX_TID_COUNT 7
364
365enum {
366 CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
367 CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/
368 CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/
369};
370
371enum {
372 CONF_PS_SCHEME_LEGACY = 0,
373 CONF_PS_SCHEME_UPSD_TRIGGER = 1,
374 CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
375 CONF_PS_SCHEME_SAPSD = 3,
376};
377
378enum {
379 CONF_ACK_POLICY_LEGACY = 0,
380 CONF_ACK_POLICY_NO_ACK = 1,
381 CONF_ACK_POLICY_BLOCK = 2,
382};
383
384
385struct conf_tx_tid {
386 u8 queue_id;
387 u8 channel_type;
388 u8 tsid;
389 u8 ps_scheme;
390 u8 ack_policy;
391 u32 apsd_conf[2];
392};
393
394struct conf_tx_settings {
395 /*
396 * The TX ED value for TELEC Enable/Disable.
397 *
398 * Range: 0, 1
399 */
400 u8 tx_energy_detection;
401
402 /*
403 * Configuration for rate classes for TX (currently only one
404 * rate class supported.)
405 */
406 struct conf_tx_rate_class rc_conf;
407
408 /*
409 * Configuration for access categories for TX rate control.
410 */
411 u8 ac_conf_count;
412 struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
413
414 /*
415 * Configuration for TID parameters.
416 */
417 u8 tid_conf_count;
418 struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
419
420 /*
421 * The TX fragmentation threshold.
422 *
423 * Range: u16
424 */
425 u16 frag_threshold;
426
427 /*
428 * Max time in msec the FW may delay frame TX-Complete interrupt.
429 *
430 * Range: u16
431 */
432 u16 tx_compl_timeout;
433
434 /*
435 * Completed TX packet count which requires to issue the TX-Complete
436 * interrupt.
437 *
438 * Range: u16
439 */
440 u16 tx_compl_threshold;
441
442};
443
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300444enum {
445 CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/
446 CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/
447 CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */
448 CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
449 CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
450};
451
452#define CONF_MAX_BCN_FILT_IE_COUNT 32
453
454#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0)
455#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1)
456
457#define CONF_BCN_IE_OUI_LEN 3
458#define CONF_BCN_IE_VER_LEN 2
459
460struct conf_bcn_filt_rule {
461 /*
462 * IE number to which to associate a rule.
463 *
464 * Range: u8
465 */
466 u8 ie;
467
468 /*
469 * Rule to associate with the specific ie.
470 *
471 * Range: CONF_BCN_RULE_PASS_ON_*
472 */
473 u8 rule;
474
475 /*
476 * OUI for the vendor specifie IE (221)
477 */
478 u8 oui[CONF_BCN_IE_OUI_LEN];
479
480 /*
481 * Type for the vendor specifie IE (221)
482 */
483 u8 type;
484
485 /*
486 * Version for the vendor specifie IE (221)
487 */
488 u8 version[CONF_BCN_IE_VER_LEN];
489};
490
491#define CONF_MAX_RSSI_SNR_TRIGGERS 8
492
493enum {
494 CONF_TRIG_METRIC_RSSI_BEACON = 0,
495 CONF_TRIG_METRIC_RSSI_DATA,
496 CONF_TRIG_METRIC_SNR_BEACON,
497 CONF_TRIG_METRIC_SNR_DATA
498};
499
500enum {
501 CONF_TRIG_EVENT_TYPE_LEVEL = 0,
502 CONF_TRIG_EVENT_TYPE_EDGE
503};
504
505enum {
506 CONF_TRIG_EVENT_DIR_LOW = 0,
507 CONF_TRIG_EVENT_DIR_HIGH,
508 CONF_TRIG_EVENT_DIR_BIDIR
509};
510
511
512struct conf_sig_trigger {
513 /*
514 * The RSSI / SNR threshold value.
515 *
516 * FIXME: what is the range?
517 */
518 s16 threshold;
519
520 /*
521 * Minimum delay between two trigger events for this trigger in ms.
522 *
523 * Range: 0 - 60000
524 */
525 u16 pacing;
526
527 /*
528 * The measurement data source for this trigger.
529 *
530 * Range: CONF_TRIG_METRIC_*
531 */
532 u8 metric;
533
534 /*
535 * The trigger type of this trigger.
536 *
537 * Range: CONF_TRIG_EVENT_TYPE_*
538 */
539 u8 type;
540
541 /*
542 * The direction of the trigger.
543 *
544 * Range: CONF_TRIG_EVENT_DIR_*
545 */
546 u8 direction;
547
548 /*
549 * Hysteresis range of the trigger around the threshold (in dB)
550 *
551 * Range: u8
552 */
553 u8 hysteresis;
554
555 /*
556 * Index of the trigger rule.
557 *
558 * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1
559 */
560 u8 index;
561
562 /*
563 * Enable / disable this rule (to use for clearing rules.)
564 *
565 * Range: 1 - Enabled, 2 - Not enabled
566 */
567 u8 enable;
568};
569
570struct conf_sig_weights {
571
572 /*
573 * RSSI from beacons average weight.
574 *
575 * Range: u8
576 */
577 u8 rssi_bcn_avg_weight;
578
579 /*
580 * RSSI from data average weight.
581 *
582 * Range: u8
583 */
584 u8 rssi_pkt_avg_weight;
585
586 /*
587 * SNR from beacons average weight.
588 *
589 * Range: u8
590 */
591 u8 snr_bcn_avg_weight;
592
593 /*
594 * SNR from data average weight.
595 *
596 * Range: u8
597 */
598 u8 snr_pkt_avg_weight;
599};
600
601enum conf_bcn_filt_mode {
602 CONF_BCN_FILT_MODE_DISABLED = 0,
603 CONF_BCN_FILT_MODE_ENABLED = 1
604};
605
Juuso Oikarinen11f70f92009-10-13 12:47:46 +0300606enum conf_bet_mode {
607 CONF_BET_MODE_DISABLE = 0,
608 CONF_BET_MODE_ENABLE = 1,
609};
610
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300611struct conf_conn_settings {
612 /*
613 * Firmware wakeup conditions configuration. The host may set only
614 * one bit.
615 *
616 * Range: CONF_WAKE_UP_EVENT_*
617 */
618 u8 wake_up_event;
619
620 /*
621 * Listen interval for beacons or Dtims.
622 *
623 * Range: 0 for beacon and Dtim wakeup
624 * 1-10 for x Dtims
625 * 1-255 for x beacons
626 */
627 u8 listen_interval;
628
629 /*
630 * Enable or disable the beacon filtering.
631 *
632 * Range: CONF_BCN_FILT_MODE_*
633 */
634 enum conf_bcn_filt_mode bcn_filt_mode;
635
636 /*
637 * Configure Beacon filter pass-thru rules.
638 */
639 u8 bcn_filt_ie_count;
640 struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
641
642 /*
643 * The number of consequtive beacons to lose, before the firmware
644 * becomes out of synch.
645 *
646 * Range: u32
647 */
648 u32 synch_fail_thold;
649
650 /*
651 * After out-of-synch, the number of TU's to wait without a further
652 * received beacon (or probe response) before issuing the BSS_EVENT_LOSE
653 * event.
654 *
655 * Range: u32
656 */
657 u32 bss_lose_timeout;
658
659 /*
660 * Beacon receive timeout.
661 *
662 * Range: u32
663 */
664 u32 beacon_rx_timeout;
665
666 /*
667 * Broadcast receive timeout.
668 *
669 * Range: u32
670 */
671 u32 broadcast_timeout;
672
673 /*
674 * Enable/disable reception of broadcast packets in power save mode
675 *
676 * Range: 1 - enable, 0 - disable
677 */
678 u8 rx_broadcast_in_ps;
679
680 /*
681 * Consequtive PS Poll failures before sending event to driver
682 *
683 * Range: u8
684 */
685 u8 ps_poll_threshold;
686
687 /*
688 * Configuration of signal (rssi/snr) triggers.
689 */
690 u8 sig_trigger_count;
691 struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS];
692
693 /*
694 * Configuration of signal average weights.
695 */
696 struct conf_sig_weights sig_weights;
Juuso Oikarinen11f70f92009-10-13 12:47:46 +0300697
698 /*
699 * Specifies if beacon early termination procedure is enabled or
700 * disabled.
701 *
702 * Range: CONF_BET_MODE_*
703 */
704 u8 bet_enable;
705
706 /*
707 * Specifies the maximum number of consecutive beacons that may be
708 * early terminated. After this number is reached at least one full
709 * beacon must be correctly received in FW before beacon ET
710 * resumes.
711 *
712 * Range 0 - 255
713 */
714 u8 bet_max_consecutive;
Juuso Oikarinen19ad0712009-11-02 20:22:11 +0200715
716 /*
717 * Specifies the maximum number of times to try PSM entry if it fails
718 * (if sending the appropriate null-func message fails.)
719 *
720 * Range 0 - 255
721 */
722 u8 psm_entry_retries;
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300723};
724
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +0300725#define CONF_SR_ERR_TBL_MAX_VALUES 14
726
727struct conf_mart_reflex_err_table {
728 /*
729 * Length of the error table values table.
730 *
731 * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
732 */
733 u8 len;
734
735 /*
736 * Smart Reflex error table upper limit.
737 *
738 * Range: s8
739 */
740 s8 upper_limit;
741
742 /*
743 * Smart Reflex error table values.
744 *
745 * Range: s8
746 */
747 s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
748};
749
750enum {
751 CONF_REF_CLK_19_2_E,
752 CONF_REF_CLK_26_E,
753 CONF_REF_CLK_38_4_E,
754 CONF_REF_CLK_52_E
755};
756
Teemu Paasikivi1ebec3d2009-10-13 12:47:48 +0300757enum single_dual_band_enum {
758 CONF_SINGLE_BAND,
759 CONF_DUAL_BAND
760};
761
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +0300762struct conf_general_parms {
763 /*
764 * RF Reference Clock type / speed
765 *
766 * Range: CONF_REF_CLK_*
767 */
768 u8 ref_clk;
769
770 /*
771 * Settling time of the reference clock after boot.
772 *
773 * Range: u8
774 */
775 u8 settling_time;
776
777 /*
778 * Flag defining whether clock is valid on wakeup.
779 *
780 * Range: 0 - not valid on wakeup, 1 - valid on wakeup
781 */
782 u8 clk_valid_on_wakeup;
783
784 /*
785 * DC-to-DC mode.
786 *
787 * Range: Unknown
788 */
789 u8 dc2dcmode;
790
791 /*
792 * Flag defining whether used as single or dual-band.
793 *
Teemu Paasikivi1ebec3d2009-10-13 12:47:48 +0300794 * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +0300795 */
796 u8 single_dual_band;
797
798 /*
799 * TX bip fem autodetect flag.
800 *
801 * Range: Unknown
802 */
803 u8 tx_bip_fem_autodetect;
804
805 /*
806 * TX bip gem manufacturer.
807 *
808 * Range: Unknown
809 */
810 u8 tx_bip_fem_manufacturer;
811
812 /*
813 * Settings flags.
814 *
815 * Range: Unknown
816 */
817 u8 settings;
818};
819
820#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
821#define CONF_NUMBER_OF_SUB_BANDS_5 7
822#define CONF_NUMBER_OF_RATE_GROUPS 6
823#define CONF_NUMBER_OF_CHANNELS_2_4 14
824#define CONF_NUMBER_OF_CHANNELS_5 35
825
826struct conf_radio_parms {
827 /*
828 * Static radio parameters for 2.4GHz
829 *
830 * Range: unknown
831 */
832 u8 rx_trace_loss;
833 u8 tx_trace_loss;
834 s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
835
836 /*
837 * Static radio parameters for 5GHz
838 *
839 * Range: unknown
840 */
841 u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
842 u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
843 s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
844
845 /*
846 * Dynamic radio parameters for 2.4GHz
847 *
848 * Range: unknown
849 */
850 s16 tx_ref_pd_voltage;
851 s8 tx_ref_power;
852 s8 tx_offset_db;
853
854 s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
855 s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
856
857 s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
858 s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
859 s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
860
861 u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
862 u8 rx_fem_insertion_loss;
863
864 /*
865 * Dynamic radio parameters for 5GHz
866 *
867 * Range: unknown
868 */
869 s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
870 s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
871 s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
872
873 s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
874 s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
875
876 s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
877 s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
878
879 /* FIXME: this is inconsistent with the types for 2.4GHz */
880 s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
881 s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
882};
883
884#define CONF_SR_ERR_TBL_COUNT 3
885
886struct conf_init_settings {
887 /*
888 * Configure Smart Reflex error table values.
889 */
890 struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
891
892 /*
893 * Smart Reflex enable flag.
894 *
895 * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
896 */
897 u8 sr_enable;
898
899 /*
900 * Configure general parameters.
901 */
902 struct conf_general_parms genparam;
903
904 /*
905 * Configure radio parameters.
906 */
907 struct conf_radio_parms radioparam;
908
909};
910
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +0300911struct conf_drv_settings {
912 struct conf_sg_settings sg;
Juuso Oikarinen8793f9b2009-10-13 12:47:40 +0300913 struct conf_rx_settings rx;
Juuso Oikarinen45b531a2009-10-13 12:47:41 +0300914 struct conf_tx_settings tx;
Juuso Oikarinen51f2be22009-10-13 12:47:42 +0300915 struct conf_conn_settings conn;
Juuso Oikarinen47fab7d2009-10-13 12:47:43 +0300916 struct conf_init_settings init;
Juuso Oikarinen2b60100b2009-10-13 12:47:39 +0300917};
918
919#endif