blob: 683ccae00ad412aa498e979d574627e87ade2088 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001====================================================================
Hannes Reinecked60256b2006-01-24 10:45:35 +01002= Adaptec Ultra320 Family Manager Set =
Linus Torvalds1da177e2005-04-16 15:20:36 -07003= =
4= README for =
5= The Linux Operating System =
6====================================================================
7
8The following information is available in this file:
9
10 1. Supported Hardware
11 2. Version History
12 3. Command Line Options
13 4. Additional Notes
14 5. Contacting Adaptec
15
16
171. Supported Hardware
18
19 The following Adaptec SCSI Host Adapters are supported by this
20 driver set.
21
22 Ultra320 ASIC Description
23 ----------------------------------------------------------------
24 AIC-7901A Single Channel 64-bit PCI-X 133MHz to
25 Ultra320 SCSI ASIC
26 AIC-7901B Single Channel 64-bit PCI-X 133MHz to
27 Ultra320 SCSI ASIC with Retained Training
28 AIC-7902A4 Dual Channel 64-bit PCI-X 133MHz to
29 Ultra320 SCSI ASIC
30 AIC-7902B Dual Channel 64-bit PCI-X 133MHz to
31 Ultra320 SCSI ASIC with Retained Training
32
33 Ultra320 Adapters Description ASIC
34 --------------------------------------------------------------------------
35 Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to 7902A4/7902B
36 Ultra320 SCSI Card (one external
37 68-pin, two internal 68-pin)
38 Adaptec SCSI Card 39320A Dual Channel 64-bit PCI-X 133MHz to 7902B
39 Ultra320 SCSI Card (one external
40 68-pin, two internal 68-pin)
41 Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4
42 Ultra320 SCSI Card (two external VHDC
43 and one internal 68-pin)
44 Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4
45 Ultra320 SCSI Card (two external VHDC
46 and one internal 68-pin) based on the
47 AIC-7902B ASIC
48 Adaptec SCSI Card 29320 Single Channel 64-bit PCI-X 133MHz to 7901A
49 Ultra320 SCSI Card (one external
50 68-pin, two internal 68-pin, one
51 internal 50-pin)
52 Adaptec SCSI Card 29320A Single Channel 64-bit PCI-X 133MHz to 7901B
53 Ultra320 SCSI Card (one external
54 68-pin, two internal 68-pin, one
55 internal 50-pin)
56 Adaptec SCSI Card 29320LP Single Channel 64-bit Low Profile 7901A
57 PCI-X 133MHz to Ultra320 SCSI Card
58 (One external VHDC, one internal
59 68-pin)
60 Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile 7901B
61 PCI-X 133MHz to Ultra320 SCSI Card
62 (One external VHDC, one internal
63 68-pin)
642. Version History
65
Hannes Reinecked60256b2006-01-24 10:45:35 +010066 3.0 (December 1st, 2005)
67 - Updated driver to use SCSI transport class infrastructure
68 - Upported sequencer and core fixes from adaptec released
69 version 2.0.15 of the driver.
70
Linus Torvalds1da177e2005-04-16 15:20:36 -070071 1.3.11 (July 11, 2003)
72 - Fix several deadlock issues.
73 - Add 29320ALP and 39320B Id's.
74
75 1.3.10 (June 3rd, 2003)
76 - Align the SCB_TAG field on a 16byte boundary. This avoids
77 SCB corruption on some PCI-33 busses.
78 - Correct non-zero luns on Rev B. hardware.
79 - Update for change in 2.5.X SCSI proc FS interface.
80 - When negotiation async via an 8bit WDTR message, send
81 an SDTR with an offset of 0 to be sure the target
82 knows we are async. This works around a firmware defect
83 in the Quantum Atlas 10K.
Matt LaPlante53cb4722006-10-03 22:55:17 +020084 - Implement controller suspend and resume.
Linus Torvalds1da177e2005-04-16 15:20:36 -070085 - Clear PCI error state during driver attach so that we
86 don't disable memory mapped I/O due to a stray write
87 by some other driver probe that occurred before we
88 claimed the controller.
89
90 1.3.9 (May 22nd, 2003)
91 - Fix compiler errors.
92 - Remove S/G splitting for segments that cross a 4GB boundary.
93 This is guaranteed not to happen in Linux.
94 - Add support for scsi_report_device_reset() found in
95 2.5.X kernels.
96 - Add 7901B support.
Matt LaPlante992caac2006-10-03 22:52:05 +020097 - Simplify handling of the packetized lun Rev A workaround.
Linus Torvalds1da177e2005-04-16 15:20:36 -070098 - Correct and simplify handling of the ignore wide residue
99 message. The previous code would fail to report a residual
100 if the transaction data length was even and we received
101 an IWR message.
102
103 1.3.8 (April 29th, 2003)
104 - Fix types accessed via the command line interface code.
105 - Perform a few firmware optimizations.
106 - Fix "Unexpected PKT busfree" errors.
107 - Use a sequencer interrupt to notify the host of
108 commands with bad status. We defer the notification
109 until there are no outstanding selections to ensure
110 that the host is interrupted for as short a time as
111 possible.
112 - Remove pre-2.2.X support.
113 - Add support for new 2.5.X interrupt API.
114 - Correct big-endian architecture support.
115
116 1.3.7 (April 16th, 2003)
117 - Use del_timer_sync() to ensure that no timeouts
118 are pending during controller shutdown.
119 - For pre-2.5.X kernels, carefully adjust our segment
120 list size to avoid SCSI malloc pool fragmentation.
121 - Cleanup channel display in our /proc output.
122 - Workaround duplicate device entries in the mid-layer
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200123 device list during add-single-device.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124
125 1.3.6 (March 28th, 2003)
126 - Correct a double free in the Domain Validation code.
127 - Correct a reference to free'ed memory during controller
128 shutdown.
129 - Reset the bus on an SE->LVD change. This is required
Matt LaPlantefa00e7e2006-11-30 04:55:36 +0100130 to reset our transceivers.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131
132 1.3.5 (March 24th, 2003)
133 - Fix a few register window mode bugs.
134 - Include read streaming in the PPR flags we display in
135 diagnostics as well as /proc.
136 - Add PCI hot plug support for 2.5.X kernels.
137 - Correct default precompensation value for RevA hardware.
138 - Fix Domain Validation thread shutdown.
139 - Add a firmware workaround to make the LED blink
140 brighter during packetized operations on the H2A4.
141 - Correct /proc display of user read streaming settings.
142 - Simplify driver locking by releasing the io_request_lock
143 upon driver entry from the mid-layer.
144 - Cleanup command line parsing and move much of this code
145 to aiclib.
146
147 1.3.4 (February 28th, 2003)
148 - Correct a race condition in our error recovery handler.
149 - Allow Test Unit Ready commands to take a full 5 seconds
150 during Domain Validation.
151
152 1.3.2 (February 19th, 2003)
153 - Correct a Rev B. regression due to the GEM318
154 compatibility fix included in 1.3.1.
155
156 1.3.1 (February 11th, 2003)
157 - Add support for the 39320A.
158 - Improve recovery for certain PCI-X errors.
159 - Fix handling of LQ/DATA/LQ/DATA for the
160 same write transaction that can occur without
161 interveining training.
162 - Correct compatibility issues with the GEM318
163 enclosure services device.
164 - Correct data corruption issue that occurred under
165 high tag depth write loads.
166 - Adapt to a change in the 2.5.X daemonize() API.
167 - Correct a "Missing case in ahd_handle_scsiint" panic.
168
169 1.3.0 (January 21st, 2003)
170 - Full regression testing for all U320 products completed.
171 - Added abort and target/lun reset error recovery handler and
Matt LaPlante5d3f0832006-11-30 05:21:10 +0100172 interrupt coalescing.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173
174 1.2.0 (November 14th, 2002)
175 - Added support for Domain Validation
176 - Add support for the Hewlett-Packard version of the 39320D
177 and AIC-7902 adapters.
178 Support for previous adapters has not been fully tested and should
179 only be used at the customer's own risk.
180
181 1.1.1 (September 24th, 2002)
182 - Added support for the Linux 2.5.X kernel series
183
184 1.1.0 (September 17th, 2002)
185 - Added support for four additional SCSI products:
186 ASC-39320, ASC-29320, ASC-29320LP, AIC-7901.
187
188 1.0.0 (May 30th, 2002)
189 - Initial driver release.
190
191 2.1. Software/Hardware Features
192 - Support for the SPI-4 "Ultra320" standard:
193 - 320MB/s transfer rates
194 - Packetized SCSI Protocol at 160MB/s and 320MB/s
195 - Quick Arbitration Selection (QAS)
196 - Retained Training Information (Rev B. ASIC only)
197 - Interrupt Coalessing
198 - Initiator Mode (target mode not currently
199 supported)
200 - Support for the PCI-X standard up to 133MHz
201 - Support for the PCI v2.2 standard
Hannes Reinecked60256b2006-01-24 10:45:35 +0100202 - Domain Validation
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203
204 2.2. Operating System Support:
205 - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
206 - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7
207 - only Intel and AMD x86 supported at this time
208 - >4GB memory configurations supported.
209
210 Refer to the User's Guide for more details on this.
211
2123. Command Line Options
213
214 WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
215 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
216 USE THEM WITH CAUTION.
217
218 Edit the file "modprobe.conf" in the directory /etc and add/edit a
219 line containing 'options aic79xx aic79xx=[command[,command...]]' where
220 'command' is one or more of the following:
221 -----------------------------------------------------------------
222 Option: verbose
223 Definition: enable additional informative messages during
224 driver operation.
225 Possible Values: This option is a flag
226 Default Value: disabled
227 -----------------------------------------------------------------
228 Option: debug:[value]
229 Definition: Enables various levels of debugging information
230 The bit definitions for the debugging mask can
231 be found in drivers/scsi/aic7xxx/aic79xx.h under
232 the "Debug" heading.
233 Possible Values: 0x0000 = no debugging, 0xffff = full debugging
234 Default Value: 0x0000
235 -----------------------------------------------------------------
236 Option: no_reset
237 Definition: Do not reset the bus during the initial probe
238 phase
239 Possible Values: This option is a flag
240 Default Value: disabled
241 -----------------------------------------------------------------
242 Option: extended
243 Definition: Force extended translation on the controller
244 Possible Values: This option is a flag
245 Default Value: disabled
246 -----------------------------------------------------------------
247 Option: periodic_otag
248 Definition: Send an ordered tag periodically to prevent
249 tag starvation. Needed for some older devices
250 Possible Values: This option is a flag
251 Default Value: disabled
252 -----------------------------------------------------------------
253 Option: reverse_scan
254 Definition: Probe the scsi bus in reverse order, starting
255 with target 15
256 Possible Values: This option is a flag
257 Default Value: disabled
258 -----------------------------------------------------------------
259 Option: global_tag_depth
260 Definition: Global tag depth for all targets on all busses.
261 This option sets the default tag depth which
262 may be selectively overridden vi the tag_info
263 option.
264 Possible Values: 1 - 253
265 Default Value: 32
266 -----------------------------------------------------------------
267 Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
268 Definition: Set the per-target tagged queue depth on a
269 per controller basis. Both controllers and targets
270 may be ommitted indicating that they should retain
271 the default tag depth.
272 Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
273 On Controller 0
274 specifies a tag depth of 16 for target 0
275 specifies a tag depth of 64 for target 3
276 specifies a tag depth of 8 for targets 4 and 5
277 leaves target 6 at the default
278 specifies a tag depth of 32 for targets 1,2,7-15
279 All other targets retain the default depth.
280
281 tag_info:{{},{32,,32}}
282 On Controller 1
283 specifies a tag depth of 32 for targets 0 and 2
284 All other targets retain the default depth.
285
286 Possible Values: 1 - 253
287 Default Value: 32
288 -----------------------------------------------------------------
289 Option: rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]}
290 Definition: Enable read streaming on a per target basis.
291 The rd_strm_bitmask is a 16 bit hex value in which
292 each bit represents a target. Setting the target's
293 bit to '1' enables read streaming for that
294 target. Controllers may be ommitted indicating that
295 they should retain the default read streaming setting.
296 Example: rd_strm:{0x0041}
297 On Controller 0
298 enables read streaming for targets 0 and 6.
299 disables read streaming for targets 1-5,7-15.
300 All other targets retain the default read
301 streaming setting.
302 Example: rd_strm:{0x0023,,0xFFFF}
303 On Controller 0
304 enables read streaming for targets 1,2, and 5.
305 disables read streaming for targets 3,4,6-15.
306 On Controller 2
307 enables read streaming for all targets.
308 All other targets retain the default read
309 streaming setting.
310
311 Possible Values: 0x0000 - 0xffff
312 Default Value: 0x0000
313 -----------------------------------------------------------------
314 Option: dv: {value[,value...]}
315 Definition: Set Domain Validation Policy on a per-controller basis.
316 Controllers may be ommitted indicating that
317 they should retain the default read streaming setting.
318 Example: dv:{-1,0,,1,1,0}
319 On Controller 0 leave DV at its default setting.
320 On Controller 1 disable DV.
321 Skip configuration on Controller 2.
322 On Controllers 3 and 4 enable DV.
323 On Controller 5 disable DV.
324
325 Possible Values: < 0 Use setting from serial EEPROM.
326 0 Disable DV
327 > 0 Enable DV
328 Default Value: DV Serial EEPROM configuration setting.
329 -----------------------------------------------------------------
330 Option: seltime:[value]
331 Definition: Specifies the selection timeout value
332 Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
333 Default Value: 0
334 -----------------------------------------------------------------
335
336 *** The following three options should only be changed at ***
337 *** the direction of a technical support representative. ***
338
339 -----------------------------------------------------------------
340 Option: precomp: {value[,value...]}
341 Definition: Set IO Cell precompensation value on a per-controller
342 basis.
343 Controllers may be ommitted indicating that
344 they should retain the default precompensation setting.
345 Example: precomp:{0x1}
346 On Controller 0 set precompensation to 1.
347 Example: precomp:{1,,7}
348 On Controller 0 set precompensation to 1.
349 On Controller 2 set precompensation to 8.
350
351 Possible Values: 0 - 7
352 Default Value: Varies based on chip revision
353 -----------------------------------------------------------------
354 Option: slewrate: {value[,value...]}
355 Definition: Set IO Cell slew rate on a per-controller basis.
356 Controllers may be ommitted indicating that
357 they should retain the default slew rate setting.
358 Example: slewrate:{0x1}
359 On Controller 0 set slew rate to 1.
360 Example: slewrate :{1,,8}
361 On Controller 0 set slew rate to 1.
362 On Controller 2 set slew rate to 8.
363
364 Possible Values: 0 - 15
365 Default Value: Varies based on chip revision
366 -----------------------------------------------------------------
367 Option: amplitude: {value[,value...]}
368 Definition: Set IO Cell signal amplitude on a per-controller basis.
369 Controllers may be ommitted indicating that
370 they should retain the default read streaming setting.
371 Example: amplitude:{0x1}
372 On Controller 0 set amplitude to 1.
373 Example: amplitude :{1,,7}
374 On Controller 0 set amplitude to 1.
375 On Controller 2 set amplitude to 7.
376
377 Possible Values: 1 - 7
378 Default Value: Varies based on chip revision
379 -----------------------------------------------------------------
380
381 Example: 'options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}'
382 enables verbose output in the driver and turns read streaming on
383 for targets 0 and 6 of Controller 0.
384
3854. Additional Notes
386
387 4.1. Known/Unresolved or FYI Issues
388
389 * Under SuSE Linux Enterprise 7, the driver may fail to operate
390 correctly due to a problem with PCI interrupt routing in the
391 Linux kernel. Please contact SuSE for an updated Linux
392 kernel.
393
394 4.2. Third-Party Compatibility Issues
395
396 * Adaptec only supports Ultra320 hard drives running
397 the latest firmware available. Please check with
398 your hard drive manufacturer to ensure you have the
399 latest version.
400
401 4.3. Operating System or Technology Limitations
402
403 * PCI Hot Plug is untested and may cause the operating system
404 to stop responding.
405 * Luns that are not numbered contiguously starting with 0 might not
406 be automatically probed during system startup. This is a limitation
407 of the OS. Please contact your Linux vendor for instructions on
408 manually probing non-contiguous luns.
409 * Using the Driver Update Disk version of this package during OS
410 installation under RedHat might result in two versions of this
411 driver being installed into the system module directory. This
412 might cause problems with the /sbin/mkinitrd program and/or
413 other RPM packages that try to install system modules. The best
414 way to correct this once the system is running is to install
415 the latest RPM package version of this driver, available from
416 http://www.adaptec.com.
417
418
Hannes Reinecked60256b2006-01-24 10:45:35 +01004195. Adaptec Customer Support
Linus Torvalds1da177e2005-04-16 15:20:36 -0700420
421 A Technical Support Identification (TSID) Number is required for
422 Adaptec technical support.
423 - The 12-digit TSID can be found on the white barcode-type label
Hannes Reinecked60256b2006-01-24 10:45:35 +0100424 included inside the box with your product. The TSID helps us
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425 provide more efficient service by accurately identifying your
426 product and support status.
Hannes Reinecked60256b2006-01-24 10:45:35 +0100427
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428 Support Options
429 - Search the Adaptec Support Knowledgebase (ASK) at
430 http://ask.adaptec.com for articles, troubleshooting tips, and
Hannes Reinecked60256b2006-01-24 10:45:35 +0100431 frequently asked questions about your product.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432 - For support via Email, submit your question to Adaptec's
Hannes Reinecked60256b2006-01-24 10:45:35 +0100433 Technical Support Specialists at http://ask.adaptec.com/.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700434
435 North America
Hannes Reinecked60256b2006-01-24 10:45:35 +0100436 - Visit our Web site at http://www.adaptec.com/.
437 - For information about Adaptec's support options, call
438 408-957-2550, 24 hours a day, 7 days a week.
439 - To speak with a Technical Support Specialist,
440 * For hardware products, call 408-934-7274,
441 Monday to Friday, 3:00 am to 5:00 pm, PDT.
442 * For RAID and Fibre Channel products, call 321-207-2000,
443 Monday to Friday, 3:00 am to 5:00 pm, PDT.
444 To expedite your service, have your computer with you.
445 - To order Adaptec products, including accessories and cables,
446 call 408-957-7274. To order cables online go to
447 http://www.adaptec.com/buy-cables/.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448
449 Europe
Hannes Reinecked60256b2006-01-24 10:45:35 +0100450 - Visit our Web site at http://www.adaptec-europe.com/.
451 - To speak with a Technical Support Specialist, call, or email,
452 * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
453 http://ask-de.adaptec.com/.
454 * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
455 http://ask-fr.adaptec.com/.
456 * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
457 http://ask.adaptec.com/.
458 - You can order Adaptec cables online at
459 http://www.adaptec.com/buy-cables/.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460
461 Japan
Hannes Reinecked60256b2006-01-24 10:45:35 +0100462 - Visit our web site at http://www.adaptec.co.jp/.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 - To speak with a Technical Support Specialist, call
Hannes Reinecked60256b2006-01-24 10:45:35 +0100464 +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
465 1:00 p.m. to 6:00 p.m.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466
467-------------------------------------------------------------------
468/*
469 * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
470 * All rights reserved.
471 *
472 * You are permitted to redistribute, use and modify this README file in whole
473 * or in part in conjunction with redistribution of software governed by the
474 * General Public License, provided that the following conditions are met:
475 * 1. Redistributions of README file must retain the above copyright
476 * notice, this list of conditions, and the following disclaimer,
477 * without modification.
478 * 2. The name of the author may not be used to endorse or promote products
479 * derived from this software without specific prior written permission.
480 * 3. Modifications or new contributions must be attributed in a copyright
481 * notice identifying the author ("Contributor") and added below the
482 * original copyright notice. The copyright notice is for purposes of
483 * identifying contributors and should not be deemed as permission to alter
484 * the permissions given by Adaptec.
485 *
486 * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND
487 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
488 * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
489 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
490 * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
491 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
492 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
493 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
494 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
495 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
496 * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
497 */