Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2013 Samsung Electronics Co., Ltd |
| 3 | * http://www.samsung.com |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify it |
| 6 | * under the terms of the GNU General Public License as published by the |
| 7 | * Free Software Foundation; either version 2 of the License, or (at your |
| 8 | * option) any later version. |
| 9 | * |
| 10 | */ |
| 11 | |
| 12 | #include <linux/bug.h> |
| 13 | #include <linux/err.h> |
| 14 | #include <linux/gpio.h> |
| 15 | #include <linux/slab.h> |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/of.h> |
| 18 | #include <linux/regmap.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/regulator/driver.h> |
| 21 | #include <linux/regulator/machine.h> |
| 22 | #include <linux/regulator/of_regulator.h> |
| 23 | #include <linux/mfd/samsung/core.h> |
| 24 | #include <linux/mfd/samsung/s2mpa01.h> |
| 25 | |
| 26 | #define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators) |
| 27 | |
| 28 | struct s2mpa01_info { |
| 29 | int ramp_delay24; |
| 30 | int ramp_delay3; |
| 31 | int ramp_delay5; |
| 32 | int ramp_delay16; |
| 33 | int ramp_delay7; |
| 34 | int ramp_delay8910; |
| 35 | }; |
| 36 | |
| 37 | static int get_ramp_delay(int ramp_delay) |
| 38 | { |
| 39 | unsigned char cnt = 0; |
| 40 | |
| 41 | ramp_delay /= 6250; |
| 42 | |
| 43 | while (true) { |
| 44 | ramp_delay = ramp_delay >> 1; |
| 45 | if (ramp_delay == 0) |
| 46 | break; |
| 47 | cnt++; |
| 48 | } |
| 49 | |
| 50 | if (cnt > 3) |
| 51 | cnt = 3; |
| 52 | |
| 53 | return cnt; |
| 54 | } |
| 55 | |
| 56 | static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, |
| 57 | unsigned int old_selector, |
| 58 | unsigned int new_selector) |
| 59 | { |
| 60 | struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); |
| 61 | unsigned int ramp_delay = 0; |
| 62 | int old_volt, new_volt; |
| 63 | |
Krzysztof Kozlowski | 0608032 | 2014-05-06 08:37:38 +0200 | [diff] [blame] | 64 | switch (rdev_get_id(rdev)) { |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 65 | case S2MPA01_BUCK2: |
| 66 | case S2MPA01_BUCK4: |
| 67 | ramp_delay = s2mpa01->ramp_delay24; |
| 68 | break; |
| 69 | case S2MPA01_BUCK3: |
| 70 | ramp_delay = s2mpa01->ramp_delay3; |
| 71 | break; |
| 72 | case S2MPA01_BUCK5: |
| 73 | ramp_delay = s2mpa01->ramp_delay5; |
| 74 | break; |
| 75 | case S2MPA01_BUCK1: |
| 76 | case S2MPA01_BUCK6: |
| 77 | ramp_delay = s2mpa01->ramp_delay16; |
| 78 | break; |
| 79 | case S2MPA01_BUCK7: |
| 80 | ramp_delay = s2mpa01->ramp_delay7; |
| 81 | break; |
| 82 | case S2MPA01_BUCK8: |
| 83 | case S2MPA01_BUCK9: |
| 84 | case S2MPA01_BUCK10: |
| 85 | ramp_delay = s2mpa01->ramp_delay8910; |
| 86 | break; |
| 87 | } |
| 88 | |
| 89 | if (ramp_delay == 0) |
| 90 | ramp_delay = rdev->desc->ramp_delay; |
| 91 | |
| 92 | old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector); |
| 93 | new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector); |
| 94 | |
| 95 | return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); |
| 96 | } |
| 97 | |
| 98 | static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
| 99 | { |
| 100 | struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); |
| 101 | unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2; |
| 102 | unsigned int ramp_enable = 1, enable_shift = 0; |
| 103 | int ret; |
| 104 | |
Krzysztof Kozlowski | 0608032 | 2014-05-06 08:37:38 +0200 | [diff] [blame] | 105 | switch (rdev_get_id(rdev)) { |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 106 | case S2MPA01_BUCK1: |
| 107 | enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT; |
| 108 | if (!ramp_delay) { |
| 109 | ramp_enable = 0; |
| 110 | break; |
| 111 | } |
| 112 | |
| 113 | if (ramp_delay > s2mpa01->ramp_delay16) |
| 114 | s2mpa01->ramp_delay16 = ramp_delay; |
| 115 | else |
| 116 | ramp_delay = s2mpa01->ramp_delay16; |
| 117 | |
| 118 | ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 119 | break; |
| 120 | case S2MPA01_BUCK2: |
| 121 | enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; |
| 122 | if (!ramp_delay) { |
| 123 | ramp_enable = 0; |
| 124 | break; |
| 125 | } |
| 126 | |
| 127 | if (ramp_delay > s2mpa01->ramp_delay24) |
| 128 | s2mpa01->ramp_delay24 = ramp_delay; |
| 129 | else |
| 130 | ramp_delay = s2mpa01->ramp_delay24; |
| 131 | |
| 132 | ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; |
| 133 | ramp_reg = S2MPA01_REG_RAMP1; |
| 134 | break; |
| 135 | case S2MPA01_BUCK3: |
| 136 | enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT; |
| 137 | if (!ramp_delay) { |
| 138 | ramp_enable = 0; |
| 139 | break; |
| 140 | } |
| 141 | |
| 142 | s2mpa01->ramp_delay3 = ramp_delay; |
| 143 | ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT; |
| 144 | ramp_reg = S2MPA01_REG_RAMP1; |
| 145 | break; |
| 146 | case S2MPA01_BUCK4: |
| 147 | enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT; |
| 148 | if (!ramp_delay) { |
| 149 | ramp_enable = 0; |
| 150 | break; |
| 151 | } |
| 152 | |
| 153 | if (ramp_delay > s2mpa01->ramp_delay24) |
| 154 | s2mpa01->ramp_delay24 = ramp_delay; |
| 155 | else |
| 156 | ramp_delay = s2mpa01->ramp_delay24; |
| 157 | |
| 158 | ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; |
| 159 | ramp_reg = S2MPA01_REG_RAMP1; |
| 160 | break; |
| 161 | case S2MPA01_BUCK5: |
| 162 | s2mpa01->ramp_delay5 = ramp_delay; |
| 163 | ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT; |
| 164 | break; |
| 165 | case S2MPA01_BUCK6: |
| 166 | if (ramp_delay > s2mpa01->ramp_delay16) |
| 167 | s2mpa01->ramp_delay16 = ramp_delay; |
| 168 | else |
| 169 | ramp_delay = s2mpa01->ramp_delay16; |
| 170 | |
| 171 | ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; |
| 172 | break; |
| 173 | case S2MPA01_BUCK7: |
| 174 | s2mpa01->ramp_delay7 = ramp_delay; |
| 175 | ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT; |
| 176 | break; |
| 177 | case S2MPA01_BUCK8: |
| 178 | case S2MPA01_BUCK9: |
| 179 | case S2MPA01_BUCK10: |
| 180 | if (ramp_delay > s2mpa01->ramp_delay8910) |
| 181 | s2mpa01->ramp_delay8910 = ramp_delay; |
| 182 | else |
| 183 | ramp_delay = s2mpa01->ramp_delay8910; |
| 184 | |
| 185 | ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT; |
| 186 | break; |
| 187 | default: |
| 188 | return 0; |
| 189 | } |
| 190 | |
| 191 | if (!ramp_enable) |
| 192 | goto ramp_disable; |
| 193 | |
Krzysztof Kozlowski | 51e2fc0 | 2014-05-06 08:37:37 +0200 | [diff] [blame] | 194 | /* Ramp delay can be enabled/disabled only for buck[1234] */ |
| 195 | if (rdev_get_id(rdev) >= S2MPA01_BUCK1 && |
| 196 | rdev_get_id(rdev) <= S2MPA01_BUCK4) { |
| 197 | ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, |
| 198 | 1 << enable_shift, 1 << enable_shift); |
| 199 | if (ret) { |
| 200 | dev_err(&rdev->dev, "failed to enable ramp rate\n"); |
| 201 | return ret; |
| 202 | } |
Sachin Kamat | f187927 | 2014-03-14 17:21:58 +0530 | [diff] [blame] | 203 | } |
| 204 | |
| 205 | ramp_val = get_ramp_delay(ramp_delay); |
| 206 | |
| 207 | return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift, |
| 208 | ramp_val << ramp_shift); |
| 209 | |
| 210 | ramp_disable: |
| 211 | return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, |
| 212 | 1 << enable_shift, 0); |
| 213 | } |
| 214 | |
| 215 | static struct regulator_ops s2mpa01_ldo_ops = { |
| 216 | .list_voltage = regulator_list_voltage_linear, |
| 217 | .map_voltage = regulator_map_voltage_linear, |
| 218 | .is_enabled = regulator_is_enabled_regmap, |
| 219 | .enable = regulator_enable_regmap, |
| 220 | .disable = regulator_disable_regmap, |
| 221 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 222 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 223 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 224 | }; |
| 225 | |
| 226 | static struct regulator_ops s2mpa01_buck_ops = { |
| 227 | .list_voltage = regulator_list_voltage_linear, |
| 228 | .map_voltage = regulator_map_voltage_linear, |
| 229 | .is_enabled = regulator_is_enabled_regmap, |
| 230 | .enable = regulator_enable_regmap, |
| 231 | .disable = regulator_disable_regmap, |
| 232 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 233 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 234 | .set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel, |
| 235 | .set_ramp_delay = s2mpa01_set_ramp_delay, |
| 236 | }; |
| 237 | |
| 238 | #define regulator_desc_ldo1(num) { \ |
| 239 | .name = "LDO"#num, \ |
| 240 | .id = S2MPA01_LDO##num, \ |
| 241 | .ops = &s2mpa01_ldo_ops, \ |
| 242 | .type = REGULATOR_VOLTAGE, \ |
| 243 | .owner = THIS_MODULE, \ |
| 244 | .min_uV = S2MPA01_LDO_MIN, \ |
| 245 | .uV_step = S2MPA01_LDO_STEP1, \ |
| 246 | .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ |
| 247 | .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ |
| 248 | .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ |
| 249 | .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ |
| 250 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 251 | } |
| 252 | #define regulator_desc_ldo2(num) { \ |
| 253 | .name = "LDO"#num, \ |
| 254 | .id = S2MPA01_LDO##num, \ |
| 255 | .ops = &s2mpa01_ldo_ops, \ |
| 256 | .type = REGULATOR_VOLTAGE, \ |
| 257 | .owner = THIS_MODULE, \ |
| 258 | .min_uV = S2MPA01_LDO_MIN, \ |
| 259 | .uV_step = S2MPA01_LDO_STEP2, \ |
| 260 | .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ |
| 261 | .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ |
| 262 | .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ |
| 263 | .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ |
| 264 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 265 | } |
| 266 | |
| 267 | #define regulator_desc_buck1_4(num) { \ |
| 268 | .name = "BUCK"#num, \ |
| 269 | .id = S2MPA01_BUCK##num, \ |
| 270 | .ops = &s2mpa01_buck_ops, \ |
| 271 | .type = REGULATOR_VOLTAGE, \ |
| 272 | .owner = THIS_MODULE, \ |
| 273 | .min_uV = S2MPA01_BUCK_MIN1, \ |
| 274 | .uV_step = S2MPA01_BUCK_STEP1, \ |
| 275 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 276 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 277 | .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \ |
| 278 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 279 | .enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \ |
| 280 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 281 | } |
| 282 | |
| 283 | #define regulator_desc_buck5 { \ |
| 284 | .name = "BUCK5", \ |
| 285 | .id = S2MPA01_BUCK5, \ |
| 286 | .ops = &s2mpa01_buck_ops, \ |
| 287 | .type = REGULATOR_VOLTAGE, \ |
| 288 | .owner = THIS_MODULE, \ |
| 289 | .min_uV = S2MPA01_BUCK_MIN2, \ |
| 290 | .uV_step = S2MPA01_BUCK_STEP1, \ |
| 291 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 292 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 293 | .vsel_reg = S2MPA01_REG_B5CTRL2, \ |
| 294 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 295 | .enable_reg = S2MPA01_REG_B5CTRL1, \ |
| 296 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 297 | } |
| 298 | |
| 299 | #define regulator_desc_buck6_7(num) { \ |
| 300 | .name = "BUCK"#num, \ |
| 301 | .id = S2MPA01_BUCK##num, \ |
| 302 | .ops = &s2mpa01_buck_ops, \ |
| 303 | .type = REGULATOR_VOLTAGE, \ |
| 304 | .owner = THIS_MODULE, \ |
| 305 | .min_uV = S2MPA01_BUCK_MIN1, \ |
| 306 | .uV_step = S2MPA01_BUCK_STEP1, \ |
| 307 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 308 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 309 | .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \ |
| 310 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 311 | .enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \ |
| 312 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 313 | } |
| 314 | |
| 315 | #define regulator_desc_buck8 { \ |
| 316 | .name = "BUCK8", \ |
| 317 | .id = S2MPA01_BUCK8, \ |
| 318 | .ops = &s2mpa01_buck_ops, \ |
| 319 | .type = REGULATOR_VOLTAGE, \ |
| 320 | .owner = THIS_MODULE, \ |
| 321 | .min_uV = S2MPA01_BUCK_MIN2, \ |
| 322 | .uV_step = S2MPA01_BUCK_STEP2, \ |
| 323 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 324 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 325 | .vsel_reg = S2MPA01_REG_B8CTRL2, \ |
| 326 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 327 | .enable_reg = S2MPA01_REG_B8CTRL1, \ |
| 328 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 329 | } |
| 330 | |
| 331 | #define regulator_desc_buck9 { \ |
| 332 | .name = "BUCK9", \ |
| 333 | .id = S2MPA01_BUCK9, \ |
| 334 | .ops = &s2mpa01_buck_ops, \ |
| 335 | .type = REGULATOR_VOLTAGE, \ |
| 336 | .owner = THIS_MODULE, \ |
| 337 | .min_uV = S2MPA01_BUCK_MIN4, \ |
| 338 | .uV_step = S2MPA01_BUCK_STEP2, \ |
| 339 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 340 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 341 | .vsel_reg = S2MPA01_REG_B9CTRL2, \ |
| 342 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 343 | .enable_reg = S2MPA01_REG_B9CTRL1, \ |
| 344 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 345 | } |
| 346 | |
| 347 | #define regulator_desc_buck10 { \ |
| 348 | .name = "BUCK10", \ |
| 349 | .id = S2MPA01_BUCK10, \ |
| 350 | .ops = &s2mpa01_buck_ops, \ |
| 351 | .type = REGULATOR_VOLTAGE, \ |
| 352 | .owner = THIS_MODULE, \ |
| 353 | .min_uV = S2MPA01_BUCK_MIN3, \ |
| 354 | .uV_step = S2MPA01_BUCK_STEP2, \ |
| 355 | .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ |
| 356 | .ramp_delay = S2MPA01_RAMP_DELAY, \ |
| 357 | .vsel_reg = S2MPA01_REG_B10CTRL2, \ |
| 358 | .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ |
| 359 | .enable_reg = S2MPA01_REG_B10CTRL1, \ |
| 360 | .enable_mask = S2MPA01_ENABLE_MASK \ |
| 361 | } |
| 362 | |
| 363 | static struct regulator_desc regulators[] = { |
| 364 | regulator_desc_ldo2(1), |
| 365 | regulator_desc_ldo1(2), |
| 366 | regulator_desc_ldo1(3), |
| 367 | regulator_desc_ldo1(4), |
| 368 | regulator_desc_ldo1(5), |
| 369 | regulator_desc_ldo2(6), |
| 370 | regulator_desc_ldo1(7), |
| 371 | regulator_desc_ldo1(8), |
| 372 | regulator_desc_ldo1(9), |
| 373 | regulator_desc_ldo1(10), |
| 374 | regulator_desc_ldo2(11), |
| 375 | regulator_desc_ldo1(12), |
| 376 | regulator_desc_ldo1(13), |
| 377 | regulator_desc_ldo1(14), |
| 378 | regulator_desc_ldo1(15), |
| 379 | regulator_desc_ldo1(16), |
| 380 | regulator_desc_ldo1(17), |
| 381 | regulator_desc_ldo1(18), |
| 382 | regulator_desc_ldo1(19), |
| 383 | regulator_desc_ldo1(20), |
| 384 | regulator_desc_ldo1(21), |
| 385 | regulator_desc_ldo2(22), |
| 386 | regulator_desc_ldo2(23), |
| 387 | regulator_desc_ldo1(24), |
| 388 | regulator_desc_ldo1(25), |
| 389 | regulator_desc_ldo1(26), |
| 390 | regulator_desc_buck1_4(1), |
| 391 | regulator_desc_buck1_4(2), |
| 392 | regulator_desc_buck1_4(3), |
| 393 | regulator_desc_buck1_4(4), |
| 394 | regulator_desc_buck5, |
| 395 | regulator_desc_buck6_7(6), |
| 396 | regulator_desc_buck6_7(7), |
| 397 | regulator_desc_buck8, |
| 398 | regulator_desc_buck9, |
| 399 | regulator_desc_buck10, |
| 400 | }; |
| 401 | |
| 402 | static int s2mpa01_pmic_probe(struct platform_device *pdev) |
| 403 | { |
| 404 | struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| 405 | struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); |
| 406 | struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX]; |
| 407 | struct device_node *reg_np = NULL; |
| 408 | struct regulator_config config = { }; |
| 409 | struct s2mpa01_info *s2mpa01; |
| 410 | int i; |
| 411 | |
| 412 | s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL); |
| 413 | if (!s2mpa01) |
| 414 | return -ENOMEM; |
| 415 | |
| 416 | for (i = 0; i < S2MPA01_REGULATOR_CNT; i++) |
| 417 | rdata[i].name = regulators[i].name; |
| 418 | |
| 419 | if (iodev->dev->of_node) { |
| 420 | reg_np = of_get_child_by_name(iodev->dev->of_node, |
| 421 | "regulators"); |
| 422 | if (!reg_np) { |
| 423 | dev_err(&pdev->dev, |
| 424 | "could not find regulators sub-node\n"); |
| 425 | return -EINVAL; |
| 426 | } |
| 427 | |
| 428 | of_regulator_match(&pdev->dev, reg_np, rdata, |
| 429 | S2MPA01_REGULATOR_MAX); |
| 430 | of_node_put(reg_np); |
| 431 | } |
| 432 | |
| 433 | platform_set_drvdata(pdev, s2mpa01); |
| 434 | |
| 435 | config.dev = &pdev->dev; |
| 436 | config.regmap = iodev->regmap_pmic; |
| 437 | config.driver_data = s2mpa01; |
| 438 | |
| 439 | for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) { |
| 440 | struct regulator_dev *rdev; |
| 441 | if (pdata) |
| 442 | config.init_data = pdata->regulators[i].initdata; |
| 443 | else |
| 444 | config.init_data = rdata[i].init_data; |
| 445 | |
| 446 | if (reg_np) |
| 447 | config.of_node = rdata[i].of_node; |
| 448 | |
| 449 | rdev = devm_regulator_register(&pdev->dev, |
| 450 | ®ulators[i], &config); |
| 451 | if (IS_ERR(rdev)) { |
| 452 | dev_err(&pdev->dev, "regulator init failed for %d\n", |
| 453 | i); |
| 454 | return PTR_ERR(rdev); |
| 455 | } |
| 456 | } |
| 457 | |
| 458 | return 0; |
| 459 | } |
| 460 | |
| 461 | static const struct platform_device_id s2mpa01_pmic_id[] = { |
| 462 | { "s2mpa01-pmic", 0}, |
| 463 | { }, |
| 464 | }; |
| 465 | MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id); |
| 466 | |
| 467 | static struct platform_driver s2mpa01_pmic_driver = { |
| 468 | .driver = { |
| 469 | .name = "s2mpa01-pmic", |
| 470 | .owner = THIS_MODULE, |
| 471 | }, |
| 472 | .probe = s2mpa01_pmic_probe, |
| 473 | .id_table = s2mpa01_pmic_id, |
| 474 | }; |
| 475 | |
| 476 | module_platform_driver(s2mpa01_pmic_driver); |
| 477 | |
| 478 | /* Module information */ |
| 479 | MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); |
| 480 | MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>"); |
| 481 | MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver"); |
| 482 | MODULE_LICENSE("GPL"); |