blob: 57e00f9bce999574d4eafc767d03344b83124e82 [file] [log] [blame]
Tomasz Figaa43736d2013-08-26 02:38:24 +09001/*
2 * Samsung's S3C6410 based Mini6410 board device tree source
3 *
4 * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
5 *
6 * Device tree source file for FriendlyARM Mini6410 board which is based on
7 * Samsung's S3C6410 SoC.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14/dts-v1/;
15
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/interrupt-controller/irq.h>
18
19#include "s3c6410.dtsi"
20
21/ {
22 model = "FriendlyARM Mini6410 board based on S3C6410";
23 compatible = "friendlyarm,mini6410", "samsung,s3c6410";
24
25 memory {
26 reg = <0x50000000 0x10000000>;
27 };
28
29 chosen {
30 bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
31 };
32
33 clocks {
34 compatible = "simple-bus";
35 #address-cells = <1>;
36 #size-cells = <0>;
37
38 fin_pll: oscillator@0 {
39 compatible = "fixed-clock";
40 reg = <0>;
41 clock-frequency = <12000000>;
42 clock-output-names = "fin_pll";
43 #clock-cells = <0>;
44 };
45
46 xusbxti: oscillator@1 {
47 compatible = "fixed-clock";
48 reg = <1>;
49 clock-output-names = "xusbxti";
50 clock-frequency = <48000000>;
51 #clock-cells = <0>;
52 };
53 };
54
55 srom-cs1@18000000 {
56 compatible = "simple-bus";
57 #address-cells = <1>;
58 #size-cells = <1>;
59 reg = <0x18000000 0x8000000>;
60 ranges;
61
62 ethernet@18000000 {
63 compatible = "davicom,dm9000";
64 reg = <0x18000000 0x2 0x18000004 0x2>;
65 interrupt-parent = <&gpn>;
66 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
67 davicom,no-eeprom;
68 };
69 };
70
71 gpio-keys {
72 compatible = "gpio-keys";
73 pinctrl-names = "default";
74 pinctrl-0 = <&gpio_keys>;
75 autorepeat;
76
77 button-k1 {
78 label = "K1";
79 gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
80 linux,code = <2>;
81 debounce-interval = <20>;
82 };
83
84 button-k2 {
85 label = "K2";
86 gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
87 linux,code = <3>;
88 debounce-interval = <20>;
89 };
90
91 button-k3 {
92 label = "K3";
93 gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
94 linux,code = <4>;
95 debounce-interval = <20>;
96 };
97
98 button-k4 {
99 label = "K4";
100 gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
101 linux,code = <5>;
102 debounce-interval = <20>;
103 };
104
105 button-k5 {
106 label = "K5";
107 gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
108 linux,code = <6>;
109 debounce-interval = <20>;
110 };
111
112 button-k6 {
113 label = "K6";
114 gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
115 linux,code = <7>;
116 debounce-interval = <20>;
117 };
118
119 button-k7 {
120 label = "K7";
121 gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
122 linux,code = <8>;
123 debounce-interval = <20>;
124 };
125
126 button-k8 {
127 label = "K8";
128 gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
129 linux,code = <9>;
130 debounce-interval = <20>;
131 };
132 };
133
134 leds {
135 compatible = "gpio-leds";
136 pinctrl-names = "default";
137 pinctrl-0 = <&gpio_leds>;
138
139 led-1 {
140 label = "LED1";
141 gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
142 linux,default-trigger = "heartbeat";
143 };
144
145 led-2 {
146 label = "LED2";
147 gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
148 linux,default-trigger = "mmc0";
149 };
150
151 led-3 {
152 label = "LED3";
153 gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
154 };
155
156 led-4 {
157 label = "LED4";
158 gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
159 };
160 };
161
162 buzzer {
163 compatible = "pwm-beeper";
164 pwms = <&pwm 0 1000000 0>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&pwm0_out>;
167 };
168};
169
170&sdhci0 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
173 bus-width = <4>;
174 status = "okay";
175};
176
177&uart0 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&uart0_data>;
180 status = "okay";
181};
182
183&uart1 {
184 pinctrl-names = "default";
185 pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
186 status = "okay";
187};
188
189&uart2 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&uart2_data>;
192 status = "okay";
193};
194
195&uart3 {
196 pinctrl-names = "default";
197 pinctrl-0 = <&uart3_data>;
198 status = "okay";
199};
200
201&pwm {
202 status = "okay";
203};
204
205&pinctrl0 {
206 gpio_leds: gpio-leds {
207 samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
208 samsung,pin-pud = <PIN_PULL_NONE>;
209 };
210
211 gpio_keys: gpio-keys {
212 samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
213 "gpn-4", "gpn-5", "gpl-11", "gpl-12";
214 samsung,pin-pud = <PIN_PULL_NONE>;
215 };
216};
217
218&i2c0 {
219 pinctrl-names = "default";
220 pinctrl-0 = <&i2c0_bus>;
221 status = "okay";
222
223 eeprom@50 {
224 compatible = "atmel,24c08";
225 reg = <0x50>;
226 pagesize = <16>;
227 };
228};