blob: e07a5fd58ad7463f8775f7334fd692c7e51df2ad [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Block device driver configuration
3#
4
Jan Engelhardtfd11d172007-07-10 12:26:06 +02005menuconfig BLK_DEV
6 bool "Block devices"
7 depends on BLOCK
8 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02009 ---help---
10 Say Y here to get to see options for various different block device
11 drivers. This option alone does not add any kernel code.
12
13 If you say N, all options in this submenu will be skipped and disabled;
14 only do this if you know what you are doing.
David Howells93614012006-09-30 20:45:40 +020015
Jan Engelhardtfd11d172007-07-10 12:26:06 +020016if BLK_DEV
Linus Torvalds1da177e2005-04-16 15:20:36 -070017
18config BLK_DEV_FD
19 tristate "Normal floppy disk support"
viro@ZenIV.linux.org.uka08b6b72005-09-06 01:48:42 +010020 depends on ARCH_MAY_HAVE_PC_FDC
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 ---help---
22 If you want to use the floppy disk drive(s) of your PC under Linux,
23 say Y. Information about this driver, especially important for IBM
Randy Dunlap31c00fc2008-11-13 21:33:24 +000024 Thinkpad users, is contained in
25 <file:Documentation/blockdev/floppy.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -070026 That file also contains the location of the Floppy driver FAQ as
27 well as location of the fdutils package used to configure additional
28 parameters of the driver at run time.
29
30 To compile this driver as a module, choose M here: the
31 module will be called floppy.
32
33config AMIGA_FLOPPY
34 tristate "Amiga floppy support"
35 depends on AMIGA
36
37config ATARI_FLOPPY
38 tristate "Atari floppy support"
39 depends on ATARI
40
Linus Torvalds1da177e2005-04-16 15:20:36 -070041config MAC_FLOPPY
42 tristate "Support for PowerMac floppy"
43 depends on PPC_PMAC && !PPC_PMAC64
44 help
45 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
46 floppy controller, say Y here. Most commonly found in PowerMacs.
47
Laurent Vivier8852ecd2008-11-15 16:10:10 +010048config BLK_DEV_SWIM
49 tristate "Support for SWIM Macintosh floppy"
50 depends on M68K && MAC
51 help
52 You should select this option if you want floppy support
53 and you don't have a II, IIfx, Q900, Q950 or AV series.
54
Linus Torvalds1da177e2005-04-16 15:20:36 -070055config AMIGA_Z2RAM
56 tristate "Amiga Zorro II ramdisk support"
57 depends on ZORRO
58 help
59 This enables support for using Chip RAM and Zorro II RAM as a
60 ramdisk or as a swap partition. Say Y if you want to include this
61 driver in the kernel.
62
63 To compile this driver as a module, choose M here: the
64 module will be called z2ram.
65
Randy Dunlap2395e462010-05-11 09:02:55 +020066config GDROM
67 tristate "SEGA Dreamcast GD-ROM drive"
68 depends on SH_DREAMCAST
69 help
70 A standard SEGA Dreamcast comes with a modified CD ROM drive called a
71 "GD-ROM" by SEGA to signify it is capable of reading special disks
72 with up to 1 GB of data. This drive will also read standard CD ROM
73 disks. Select this option to access any disks in your GD ROM drive.
74 Most users will want to say "Y" here.
75 You can also build this as a module which will be called gdrom.
76
Linus Torvalds1da177e2005-04-16 15:20:36 -070077config PARIDE
78 tristate "Parallel port IDE device support"
Marko Kohtala6a19b412006-01-06 00:19:49 -080079 depends on PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 ---help---
81 There are many external CD-ROM and disk devices that connect through
82 your computer's parallel port. Most of them are actually IDE devices
83 using a parallel port IDE adapter. This option enables the PARIDE
84 subsystem which contains drivers for many of these external drives.
Randy Dunlap31c00fc2008-11-13 21:33:24 +000085 Read <file:Documentation/blockdev/paride.txt> for more information.
Linus Torvalds1da177e2005-04-16 15:20:36 -070086
87 If you have said Y to the "Parallel-port support" configuration
88 option, you may share a single port between your printer and other
89 parallel port devices. Answer Y to build PARIDE support into your
90 kernel, or M if you would like to build it as a loadable module. If
91 your parallel port support is in a loadable module, you must build
92 PARIDE as a module. If you built PARIDE support into your kernel,
93 you may still build the individual protocol modules and high-level
94 drivers as loadable modules. If you build this support as a module,
95 it will be called paride.
96
97 To use the PARIDE support, you must say Y or M here and also to at
98 least one high-level driver (e.g. "Parallel port IDE disks",
99 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
100 to at least one protocol driver (e.g. "ATEN EH-100 protocol",
101 "MicroSolutions backpack protocol", "DataStor Commuter protocol"
102 etc.).
103
104source "drivers/block/paride/Kconfig"
105
Sam Bradshaw88523a62011-08-30 08:34:26 -0600106source "drivers/block/mtip32xx/Kconfig"
107
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108config BLK_CPQ_DA
109 tristate "Compaq SMART2 support"
Stephen Rothwellf057eac2007-07-15 23:40:05 -0700110 depends on PCI && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 help
112 This is the driver for Compaq Smart Array controllers. Everyone
113 using these boards should say Y here. See the file
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000114 <file:Documentation/blockdev/cpqarray.txt> for the current list of
115 boards supported by this driver, and for further information on the
116 use of this driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117
118config BLK_CPQ_CISS_DA
119 tristate "Compaq Smart Array 5xxx support"
120 depends on PCI
Akinobu Mitab7010ed2012-09-09 12:47:47 +0200121 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122 help
123 This is the driver for Compaq Smart Array 5xxx controllers.
124 Everyone using these boards should say Y here.
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000125 See <file:Documentation/blockdev/cciss.txt> for the current list of
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126 boards supported by this driver, and for further information
127 on the use of this driver.
128
129config CISS_SCSI_TAPE
130 bool "SCSI tape drive support for Smart Array 5xxx"
Randy Dunlap3e29fe82006-12-06 20:38:40 -0800131 depends on BLK_CPQ_CISS_DA && PROC_FS
132 depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 help
134 When enabled (Y), this option allows SCSI tape drives and SCSI medium
135 changers (tape robots) to be accessed via a Compaq 5xxx array
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000136 controller. (See <file:Documentation/blockdev/cciss.txt> for more details.)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137
138 "SCSI support" and "SCSI tape support" must also be enabled for this
139 option to work.
140
141 When this option is disabled (N), the SCSI portion of the driver
142 is not compiled.
143
144config BLK_DEV_DAC960
145 tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
146 depends on PCI
147 help
148 This driver adds support for the Mylex DAC960, AcceleRAID, and
149 eXtremeRAID PCI RAID controllers. See the file
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000150 <file:Documentation/blockdev/README.DAC960> for further information
151 about this driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152
153 To compile this driver as a module, choose M here: the
154 module will be called DAC960.
155
156config BLK_DEV_UMEM
Kees Cookb8977282012-10-23 14:01:51 -0600157 tristate "Micro Memory MM5415 Battery Backed RAM support"
158 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159 ---help---
160 Saying Y here will include support for the MM5415 family of
161 battery backed (Non-volatile) RAM cards.
162 <http://www.umem.com/>
163
164 The cards appear as block devices that can be partitioned into
165 as many as 15 partitions.
166
167 To compile this driver as a module, choose M here: the
168 module will be called umem.
169
170 The umem driver has not yet been allocated a MAJOR number, so
Adrian Bunkbf6ee0a2006-10-03 22:17:48 +0200171 one is chosen dynamically.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172
173config BLK_DEV_UBD
174 bool "Virtual block device"
175 depends on UML
176 ---help---
177 The User-Mode Linux port includes a driver called UBD which will let
178 you access arbitrary files on the host computer as block devices.
179 Unless you know that you do not need such virtual block devices say
180 Y here.
181
182config BLK_DEV_UBD_SYNC
183 bool "Always do synchronous disk IO for UBD"
184 depends on BLK_DEV_UBD
185 ---help---
186 Writes to the virtual block device are not immediately written to the
187 host's disk; this may cause problems if, for example, the User-Mode
188 Linux 'Virtual Machine' uses a journalling filesystem and the host
189 computer crashes.
190
191 Synchronous operation (i.e. always writing data to the host's disk
192 immediately) is configurable on a per-UBD basis by using a special
193 kernel command line option. Alternatively, you can say Y here to
194 turn on synchronous operation by default for all block devices.
195
196 If you're running a journalling file system (like reiserfs, for
197 example) in your virtual machine, you will want to say Y here. If
198 you care for the safety of the data in your virtual machine, Y is a
199 wise choice too. In all other cases (for example, if you're just
200 playing around with User-Mode Linux) you can choose N.
201
202config BLK_DEV_COW_COMMON
203 bool
204 default BLK_DEV_UBD
205
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206config BLK_DEV_LOOP
207 tristate "Loopback device support"
208 ---help---
209 Saying Y here will allow you to use a regular file as a block
210 device; you can then create a file system on that block device and
211 mount it just as you would mount other block devices such as hard
212 drive partitions, CD-ROM drives or floppy drives. The loop devices
213 are block special device files with major number 7 and typically
214 called /dev/loop0, /dev/loop1 etc.
215
216 This is useful if you want to check an ISO 9660 file system before
217 burning the CD, or if you want to use floppy images without first
218 writing them to floppy. Furthermore, some Linux distributions avoid
219 the need for a dedicated Linux partition by keeping their complete
220 root file system inside a DOS FAT file using this loop device
221 driver.
222
223 To use the loop device, you need the losetup utility, found in the
224 util-linux package, see
225 <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
226
227 The loop device driver can also be used to "hide" a file system in
228 a disk partition, floppy, or regular file, either using encryption
229 (scrambling the data) or steganography (hiding the data in the low
230 bits of, say, a sound file). This is also safe if the file resides
231 on a remote file server.
232
233 There are several ways of encrypting disks. Some of these require
234 kernel patches. The vanilla kernel offers the cryptoloop option
235 and a Device Mapper target (which is superior, as it supports all
236 file systems). If you want to use the cryptoloop, say Y to both
237 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12
238 or later) version of util-linux. Additionally, be aware that
239 the cryptoloop is not safe for storing journaled filesystems.
240
241 Note that this loop device has nothing to do with the loopback
242 device used for network connections from the machine to itself.
243
244 To compile this driver as a module, choose M here: the
245 module will be called loop.
246
247 Most users will answer N here.
248
Kay Sieversd134b002011-07-31 22:08:04 +0200249config BLK_DEV_LOOP_MIN_COUNT
250 int "Number of loop devices to pre-create at init time"
251 depends on BLK_DEV_LOOP
252 default 8
253 help
254 Static number of loop devices to be unconditionally pre-created
255 at init time.
256
257 This default value can be overwritten on the kernel command
258 line or with module-parameter loop.max_loop.
259
260 The historic default is 8. If a late 2011 version of losetup(8)
261 is used, it can be set to 0, since needed loop devices can be
262 dynamically allocated with the /dev/loop-control interface.
263
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264config BLK_DEV_CRYPTOLOOP
265 tristate "Cryptoloop Support"
266 select CRYPTO
Herbert Xu8df3b0a2006-12-02 14:36:03 +1100267 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268 depends on BLK_DEV_LOOP
269 ---help---
270 Say Y here if you want to be able to use the ciphers that are
271 provided by the CryptoAPI as loop transformation. This might be
272 used as hard disk encryption.
273
274 WARNING: This device is not safe for journaled file systems like
275 ext3 or Reiserfs. Please use the Device Mapper crypto module
276 instead, which can be configured to be on-disk compatible with the
277 cryptoloop device.
278
Philipp Reisnerb411b362009-09-25 16:07:19 -0700279source "drivers/block/drbd/Kconfig"
280
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281config BLK_DEV_NBD
282 tristate "Network block device support"
283 depends on NET
284 ---help---
285 Saying Y here will allow your computer to be a client for network
286 block devices, i.e. it will be able to use block devices exported by
287 servers (mount file systems on them etc.). Communication between
288 client and server works over TCP/IP networking, but to the client
289 program this is hidden: it looks like a regular local file access to
290 a block device special file such as /dev/nd0.
291
292 Network block devices also allows you to run a block-device in
293 userland (making server and client physically the same computer,
294 communicating using the loopback network device).
295
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000296 Read <file:Documentation/blockdev/nbd.txt> for more information,
297 especially about where to find the server code, which runs in user
298 space and does not need special kernel support.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299
300 Note that this has nothing to do with the network file systems NFS
301 or Coda; you can say N here even if you intend to use NFS or Coda.
302
303 To compile this driver as a module, choose M here: the
304 module will be called nbd.
305
306 If unsure, say N.
307
Matthew Wilcoxb60503b2011-01-20 12:50:14 -0500308config BLK_DEV_NVME
309 tristate "NVM Express block device"
310 depends on PCI
311 ---help---
312 The NVM Express driver is for solid state drives directly
313 connected to the PCI or PCI Express bus. If you know you
314 don't have one of these, it is safe to answer N.
315
316 To compile this driver as a module, choose M here: the
317 module will be called nvme.
318
Jeff Garzik2a138772009-04-10 07:50:45 -0400319config BLK_DEV_OSD
320 tristate "OSD object-as-blkdev support"
321 depends on SCSI_OSD_ULD
322 ---help---
323 Saying Y or M here will allow the exporting of a single SCSI
324 OSD (object-based storage) object as a Linux block device.
325
326 For example, if you create a 2G object on an OSD device,
327 you can then use this module to present that 2G object as
328 a Linux block device.
329
330 To compile this driver as a module, choose M here: the
331 module will be called osdblk.
332
333 If unsure, say N.
334
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335config BLK_DEV_SX8
336 tristate "Promise SATA SX8 support"
337 depends on PCI
338 ---help---
339 Saying Y or M here will enable support for the
340 Promise SATA SX8 controllers.
341
342 Use devices /dev/sx8/$N and /dev/sx8/$Np$M.
343
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344config BLK_DEV_RAM
Nick Piggin9db55792008-02-08 04:19:49 -0800345 tristate "RAM block device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346 ---help---
347 Saying Y here will allow you to use a portion of your RAM memory as
348 a block device, so that you can make file systems on it, read and
349 write to it and do all the other things that you can do with normal
350 block devices (such as hard drives). It is usually used to load and
351 store a copy of a minimal root file system off of a floppy into RAM
352 during the initial install of Linux.
353
Randy Dunlap31c00fc2008-11-13 21:33:24 +0000354 Note that the kernel command line option "ramdisk=XX" is now obsolete.
355 For details, read <file:Documentation/blockdev/ramdisk.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356
357 To compile this driver as a module, choose M here: the
358 module will be called rd.
359
360 Most normal users won't need the RAM disk functionality, and can
361 thus say N here.
362
363config BLK_DEV_RAM_COUNT
Adrian Bunka687fb12006-03-28 01:56:17 -0800364 int "Default number of RAM disks"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 default "16"
Adrian Bunka687fb12006-03-28 01:56:17 -0800366 depends on BLK_DEV_RAM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700367 help
Patrick Ringl2e977c82007-10-19 23:05:02 +0200368 The default value is 16 RAM disks. Change this if you know what you
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 are doing. If you boot from a filesystem that needs to be extracted
370 in memory, you will need at least one RAM disk (e.g. root on cramfs).
371
372config BLK_DEV_RAM_SIZE
373 int "Default RAM disk size (kbytes)"
374 depends on BLK_DEV_RAM
375 default "4096"
376 help
377 The default value is 4096 kilobytes. Only change this if you know
Patrick Ringl2e977c82007-10-19 23:05:02 +0200378 what you are doing.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379
Nick Piggin75acb9c2008-02-08 04:19:50 -0800380config BLK_DEV_XIP
381 bool "Support XIP filesystems on RAM block device"
382 depends on BLK_DEV_RAM
383 default n
384 help
385 Support XIP filesystems (such as ext2 with XIP support on) on
386 top of block ram device. This will slightly enlarge the kernel, and
387 will prevent RAM block device backing store memory from being
388 allocated from highmem (only a problem for highmem systems).
389
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390config CDROM_PKTCDVD
391 tristate "Packet writing on CD/DVD media"
392 depends on !UML
393 help
Thomas Maier2d4eeec52006-12-08 02:36:10 -0800394 If you have a CDROM/DVD drive that supports packet writing, say
395 Y to include support. It should work with any MMC/Mt Fuji
396 compliant ATAPI or SCSI drive, which is just about any newer
397 DVD/CD writer.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398
Thomas Maier2d4eeec52006-12-08 02:36:10 -0800399 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs
400 is possible.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700401 DVD-RW disks must be in restricted overwrite mode.
402
Thomas Maier2d4eeec52006-12-08 02:36:10 -0800403 See the file <file:Documentation/cdrom/packet-writing.txt>
404 for further information on the use of this driver.
405
Linus Torvalds1da177e2005-04-16 15:20:36 -0700406 To compile this driver as a module, choose M here: the
407 module will be called pktcdvd.
408
409config CDROM_PKTCDVD_BUFFERS
410 int "Free buffers for data gathering"
411 depends on CDROM_PKTCDVD
412 default "8"
413 help
414 This controls the maximum number of active concurrent packets. More
415 concurrent packets can increase write performance, but also require
416 more memory. Each concurrent packet will require approximately 64Kb
Peter Osterlunde1bc89b2006-02-04 23:27:47 -0800417 of non-swappable kernel memory, memory which will be allocated when
418 a disc is opened for writing.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419
420config CDROM_PKTCDVD_WCACHE
Kees Cookb8977282012-10-23 14:01:51 -0600421 bool "Enable write caching"
422 depends on CDROM_PKTCDVD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423 help
424 If enabled, write caching will be set for the CD-R/W device. For now
425 this option is dangerous unless the CD-RW media is known good, as we
426 don't do deferred write error handling yet.
427
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428config ATA_OVER_ETH
429 tristate "ATA over Ethernet support"
430 depends on NET
431 help
432 This driver provides Support for ATA over Ethernet block
433 devices like the Coraid EtherDrive (R) Storage Blade.
434
unsik Kim3fbed4c2009-04-02 12:50:58 -0700435config MG_DISK
436 tristate "mGine mflash, gflash support"
Bartlomiej Zolnierkiewicz8a11a782009-04-28 13:06:16 +0900437 depends on ARM && GPIOLIB
unsik Kim3fbed4c2009-04-02 12:50:58 -0700438 help
439 mGine mFlash(gFlash) block device driver
440
441config MG_DISK_RES
442 int "Size of reserved area before MBR"
443 depends on MG_DISK
444 default 0
445 help
446 Define size of reserved area that usually used for boot. Unit is KB.
447 All of the block device operation will be taken this value as start
448 offset
449 Examples:
450 1024 => 1 MB
451
David S. Miller667ef3c2007-07-16 04:03:56 -0700452config SUNVDC
453 tristate "Sun Virtual Disk Client support"
454 depends on SUN_LDOMS
455 help
456 Support for virtual disk devices as a client under Sun
457 Logical Domains.
458
Martin Schwidefsky61d48c22007-05-10 15:46:00 +0200459source "drivers/s390/block/Kconfig"
460
Grant Likely74489a92007-07-17 04:03:39 -0700461config XILINX_SYSACE
462 tristate "Xilinx SystemACE support"
Michal Simek6fa612b2009-05-11 15:49:12 +0200463 depends on 4xx || MICROBLAZE
Grant Likely74489a92007-07-17 04:03:39 -0700464 help
465 Include support for the Xilinx SystemACE CompactFlash interface
466
Jeremy Fitzhardinge9f27ee52007-07-17 18:37:06 -0700467config XEN_BLKDEV_FRONTEND
468 tristate "Xen virtual block device support"
469 depends on XEN
470 default y
Ian Campbell2de06cc2009-02-09 12:05:51 -0800471 select XEN_XENBUS_FRONTEND
Jeremy Fitzhardinge9f27ee52007-07-17 18:37:06 -0700472 help
473 This driver implements the front-end of the Xen virtual
474 block device driver. It communicates with a back-end driver
475 in another domain which drives the actual block device.
476
Konrad Rzeszutek Wilkdfc07b12011-04-18 14:24:23 -0400477config XEN_BLKDEV_BACKEND
Konrad Rzeszutek Wilkea5e1162011-08-03 11:12:17 -0400478 tristate "Xen block-device backend driver"
Konrad Rzeszutek Wilkdfc07b12011-04-18 14:24:23 -0400479 depends on XEN_BACKEND
480 help
481 The block-device backend driver allows the kernel to export its
482 block devices to other guests via a high-performance shared-memory
483 interface.
484
Konrad Rzeszutek Wilka4c34852011-05-12 16:10:55 -0400485 The corresponding Linux frontend driver is enabled by the
486 CONFIG_XEN_BLKDEV_FRONTEND configuration option.
487
488 The backend driver attaches itself to a any block device specified
489 in the XenBus configuration. There are no limits to what the block
490 device as long as it has a major and minor.
491
492 If you are compiling a kernel to run in a Xen block backend driver
493 domain (often this is domain 0) you should say Y here. To
494 compile this driver as a module, chose M here: the module
495 will be called xen-blkback.
496
497
Rusty Russelle467cde2007-10-22 11:03:38 +1000498config VIRTIO_BLK
Kees Cookb8977282012-10-23 14:01:51 -0600499 tristate "Virtio block driver"
500 depends on VIRTIO
Rusty Russelle467cde2007-10-22 11:03:38 +1000501 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -0600502 This is the virtual block driver for virtio. It can be used with
503 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russelle467cde2007-10-22 11:03:38 +1000504
Adrian Bunk453ea3e2008-07-16 20:33:47 +0200505config BLK_DEV_HD
Adrian Bunkf327c1c2008-07-16 20:33:47 +0200506 bool "Very old hard disk (MFM/RLL/IDE) driver"
Adrian Bunk453ea3e2008-07-16 20:33:47 +0200507 depends on HAVE_IDE
508 depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
509 help
Adrian Bunkf327c1c2008-07-16 20:33:47 +0200510 This is a very old hard disk driver that lacks the enhanced
511 functionality of the newer ones.
Adrian Bunk453ea3e2008-07-16 20:33:47 +0200512
Adrian Bunkf327c1c2008-07-16 20:33:47 +0200513 It is required for systems with ancient MFM/RLL/ESDI drives.
Adrian Bunk453ea3e2008-07-16 20:33:47 +0200514
Adrian Bunkf327c1c2008-07-16 20:33:47 +0200515 If unsure, say N.
Adrian Bunk453ea3e2008-07-16 20:33:47 +0200516
Yehuda Sadeh602adf42010-08-12 16:11:25 -0700517config BLK_DEV_RBD
518 tristate "Rados block device (RBD)"
Kees Cookb8977282012-10-23 14:01:51 -0600519 depends on INET && BLOCK
Yehuda Sadeh602adf42010-08-12 16:11:25 -0700520 select CEPH_LIB
521 select LIBCRC32C
522 select CRYPTO_AES
523 select CRYPTO
524 default n
525 help
526 Say Y here if you want include the Rados block device, which stripes
527 a block device over objects stored in the Ceph distributed object
528 store.
529
530 More information at http://ceph.newdream.net/.
531
532 If unsure, say N.
533
josh.h.morris@us.ibm.com8722ff82013-02-05 14:15:02 +0100534config BLK_DEV_RSXX
Philip J Kelleherf730e3d2013-06-18 14:43:58 -0500535 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver"
josh.h.morris@us.ibm.com8722ff82013-02-05 14:15:02 +0100536 depends on PCI
537 help
538 Device driver for IBM's high speed PCIe SSD
Philip J Kelleherf730e3d2013-06-18 14:43:58 -0500539 storage device: Flash Adapter 900GB Full Height.
josh.h.morris@us.ibm.com8722ff82013-02-05 14:15:02 +0100540
541 To compile this driver as a module, choose M here: the
542 module will be called rsxx.
543
Jan Engelhardtfd11d172007-07-10 12:26:06 +0200544endif # BLK_DEV