blob: 7abf9014718023ef8042d78131a2a3fe4c319d25 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/include/linux/ext3_fs_i.h
3 *
4 * Copyright (C) 1992, 1993, 1994, 1995
5 * Remy Card (card@masi.ibp.fr)
6 * Laboratoire MASI - Institut Blaise Pascal
7 * Universite Pierre et Marie Curie (Paris VI)
8 *
9 * from
10 *
11 * linux/include/linux/minix_fs_i.h
12 *
13 * Copyright (C) 1991, 1992 Linus Torvalds
14 */
15
16#ifndef _LINUX_EXT3_FS_I
17#define _LINUX_EXT3_FS_I
18
19#include <linux/rwsem.h>
20#include <linux/rbtree.h>
21#include <linux/seqlock.h>
Arjan van de Ven97461512006-03-23 03:00:42 -080022#include <linux/mutex.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070023
24struct ext3_reserve_window {
25 __u32 _rsv_start; /* First byte reserved */
26 __u32 _rsv_end; /* Last byte reserved or 0 */
27};
28
29struct ext3_reserve_window_node {
30 struct rb_node rsv_node;
31 __u32 rsv_goal_size;
32 __u32 rsv_alloc_hit;
33 struct ext3_reserve_window rsv_window;
34};
35
36struct ext3_block_alloc_info {
37 /* information about reservation window */
38 struct ext3_reserve_window_node rsv_window_node;
39 /*
40 * was i_next_alloc_block in ext3_inode_info
41 * is the logical (file-relative) number of the
42 * most-recently-allocated block in this file.
43 * We use this for detecting linearly ascending allocation requests.
44 */
45 __u32 last_alloc_logical_block;
46 /*
47 * Was i_next_alloc_goal in ext3_inode_info
48 * is the *physical* companion to i_next_alloc_block.
49 * it the the physical block number of the block which was most-recentl
50 * allocated to this file. This give us the goal (target) for the next
51 * allocation when we detect linearly ascending requests.
52 */
53 __u32 last_alloc_physical_block;
54};
55
56#define rsv_start rsv_window._rsv_start
57#define rsv_end rsv_window._rsv_end
58
59/*
60 * third extended file system inode data in memory
61 */
62struct ext3_inode_info {
63 __le32 i_data[15]; /* unconverted */
64 __u32 i_flags;
65#ifdef EXT3_FRAGMENTS
66 __u32 i_faddr;
67 __u8 i_frag_no;
68 __u8 i_frag_size;
69#endif
70 __u32 i_file_acl;
71 __u32 i_dir_acl;
72 __u32 i_dtime;
73
74 /*
75 * i_block_group is the number of the block group which contains
76 * this file's inode. Constant across the lifetime of the inode,
77 * it is ued for making block allocation decisions - we try to
78 * place a file's data blocks near its inode block, and new inodes
79 * near to their parent directory's inode.
80 */
81 __u32 i_block_group;
82 __u32 i_state; /* Dynamic state flags for ext3 */
83
84 /* block reservation info */
85 struct ext3_block_alloc_info *i_block_alloc_info;
86
87 __u32 i_dir_start_lookup;
88#ifdef CONFIG_EXT3_FS_XATTR
89 /*
90 * Extended attributes can be read independently of the main file
Jes Sorensen1b1dcc12006-01-09 15:59:24 -080091 * data. Taking i_mutex even when reading would cause contention
Linus Torvalds1da177e2005-04-16 15:20:36 -070092 * between readers of EAs and writers of regular file data, so
93 * instead we synchronize on xattr_sem when reading or changing
94 * EAs.
95 */
96 struct rw_semaphore xattr_sem;
97#endif
98#ifdef CONFIG_EXT3_FS_POSIX_ACL
99 struct posix_acl *i_acl;
100 struct posix_acl *i_default_acl;
101#endif
102
103 struct list_head i_orphan; /* unlinked but open inodes */
104
105 /*
106 * i_disksize keeps track of what the inode size is ON DISK, not
107 * in memory. During truncate, i_size is set to the new size by
108 * the VFS prior to calling ext3_truncate(), but the filesystem won't
109 * set i_disksize to 0 until the truncate is actually under way.
110 *
111 * The intent is that i_disksize always represents the blocks which
112 * are used by this file. This allows recovery to restart truncate
113 * on orphans if we crash during truncate. We actually write i_disksize
114 * into the on-disk inode when writing inodes out, instead of i_size.
115 *
116 * The only time when i_disksize and i_size may be different is when
117 * a truncate is in progress. The only things which change i_disksize
118 * are ext3_get_block (growth) and ext3_truncate (shrinkth).
119 */
120 loff_t i_disksize;
121
122 /* on-disk additional length */
123 __u16 i_extra_isize;
124
125 /*
Arjan van de Ven97461512006-03-23 03:00:42 -0800126 * truncate_mutex is for serialising ext3_truncate() against
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127 * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's
128 * data tree are chopped off during truncate. We can't do that in
129 * ext3 because whenever we perform intermediate commits during
130 * truncate, the inode and all the metadata blocks *must* be in a
131 * consistent state which allows truncation of the orphans to restart
132 * during recovery. Hence we must fix the get_block-vs-truncate race
Arjan van de Ven97461512006-03-23 03:00:42 -0800133 * by other means, so we have truncate_mutex.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 */
Arjan van de Ven97461512006-03-23 03:00:42 -0800135 struct mutex truncate_mutex;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136 struct inode vfs_inode;
137};
138
139#endif /* _LINUX_EXT3_FS_I */