blob: 55660eaf947c2cae20fa894f2867dd1d5c12bda7 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# USB Miscellaneous driver configuration
3#
4comment "USB Miscellaneous drivers"
5 depends on USB
6
7config USB_EMI62
8 tristate "EMI 6|2m USB Audio interface support"
9 depends on USB
10 ---help---
11 This driver loads firmware to Emagic EMI 6|2m low latency USB
12 Audio and Midi interface.
13
14 After firmware load the device is handled with standard linux
15 USB Audio driver.
16
17 This code is also available as a module ( = code which can be
18 inserted in and removed from the running kernel whenever you want).
19 The module will be called audio. If you want to compile it as a
20 module, say M here and read <file:Documentation/kbuild/modules.txt>.
21
22config USB_EMI26
23 tristate "EMI 2|6 USB Audio interface support"
24 depends on USB
25 ---help---
26 This driver loads firmware to Emagic EMI 2|6 low latency USB
27 Audio interface.
28
29 After firmware load the device is handled with standard linux
30 USB Audio driver.
31
32 To compile this driver as a module, choose M here: the
33 module will be called emi26.
34
Steven Haigh03270632006-08-09 07:42:06 +100035config USB_ADUTUX
Robert P. J. Daybce62c22008-03-08 02:46:57 -050036 tristate "ADU devices from Ontrak Control Systems"
37 depends on USB
Steven Haigh03270632006-08-09 07:42:06 +100038 help
39 Say Y if you want to use an ADU device from Ontrak Control
40 Systems.
41
42 To compile this driver as a module, choose M here. The module
43 will be called adutux.
44
Harrison Metzgereb86be52008-08-14 11:29:32 -050045config USB_SEVSEG
46 tristate "USB 7-Segment LED Display"
47 depends on USB
48 help
49 Say Y here if you have a USB 7-Segment Display by Delcom
50
51 To compile this driver as a module, choose M here: the
52 module will be called usbsevseg.
53
Linus Torvalds1da177e2005-04-16 15:20:36 -070054config USB_RIO500
Robert P. J. Daybce62c22008-03-08 02:46:57 -050055 tristate "USB Diamond Rio500 support"
56 depends on USB
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 help
58 Say Y here if you want to connect a USB Rio500 mp3 player to your
59 computer's USB port. Please read <file:Documentation/usb/rio.txt>
60 for more information.
61
62 To compile this driver as a module, choose M here: the
63 module will be called rio500.
64
65config USB_LEGOTOWER
Robert P. J. Daybce62c22008-03-08 02:46:57 -050066 tristate "USB Lego Infrared Tower support"
67 depends on USB
Linus Torvalds1da177e2005-04-16 15:20:36 -070068 help
69 Say Y here if you want to connect a USB Lego Infrared Tower to your
70 computer's USB port.
71
72 This code is also available as a module ( = code which can be
73 inserted in and removed from the running kernel whenever you want).
74 The module will be called legousbtower. If you want to compile it as
75 a module, say M here and read
76 <file:Documentation/kbuild/modules.txt>.
77
78config USB_LCD
79 tristate "USB LCD driver support"
80 depends on USB
81 help
82 Say Y here if you want to connect an USBLCD to your computer's
83 USB port. The USBLCD is a small USB interface board for
84 alphanumeric LCD modules. See <http://www.usblcd.de/> for more
85 information.
86
87 To compile this driver as a module, choose M here: the
88 module will be called usblcd.
89
90config USB_LED
91 tristate "USB LED driver support"
92 depends on USB
93 help
94 Say Y here if you want to connect an USBLED device to your
95 computer's USB port.
96
97 To compile this driver as a module, choose M here: the
98 module will be called usbled.
99
Oliver Bock9189bfc2006-06-22 19:04:47 +0200100config USB_CYPRESS_CY7C63
Oliver Bock4255e6f2006-06-10 00:42:19 +0200101 tristate "Cypress CY7C63xxx USB driver support"
102 depends on USB
103 help
104 Say Y here if you want to connect a Cypress CY7C63xxx
Oliver Bock9189bfc2006-06-22 19:04:47 +0200105 micro controller to your computer's USB port. Currently this
106 driver supports the pre-programmed devices (incl. firmware)
107 by AK Modul-Bus Computer GmbH.
Oliver Bock4255e6f2006-06-10 00:42:19 +0200108
109 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
110
111 To compile this driver as a module, choose M here: the
Oliver Bock9189bfc2006-06-22 19:04:47 +0200112 module will be called cypress_cy7c63.
Oliver Bock4255e6f2006-06-10 00:42:19 +0200113
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114config USB_CYTHERM
115 tristate "Cypress USB thermometer driver support"
116 depends on USB
117 help
118 Say Y here if you want to connect a Cypress USB thermometer
119 device to your computer's USB port. This device is also known
120 as the Cypress USB Starter kit or demo board. The Elektor
121 magazine published a modified version of this device in issue
122 #291.
123
124 To compile this driver as a module, choose M here: the
125 module will be called cytherm.
126
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127config USB_IDMOUSE
128 tristate "Siemens ID USB Mouse Fingerprint sensor support"
129 depends on USB
130 help
131 Say Y here if you want to use the fingerprint sensor on
132 the Siemens ID Mouse. There is also a Siemens ID Mouse
133 _Professional_, which has not been tested with this driver,
134 but uses the same sensor and may therefore work.
135
136 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
137 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
138
139 See also <http://www.fs.tum.de/~echtler/idmouse/>.
140
Tony Olecha5c66e42006-09-13 11:26:04 +0100141config USB_FTDI_ELAN
142 tristate "Elan PCMCIA CardBus Adapter USB Client"
143 depends on USB
144 default M
145 help
146 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
147 Currently only the U132 adapter is available.
148
149 The U132 is specifically designed for CardBus PC cards that contain
150 an OHCI host controller. Typical PC cards are the Orange Mobile 3G
151 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
152 with PC cards that do not contain an OHCI controller. To use a U132
153 adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
154 module which is a USB host controller driver that talks to the OHCI
155 controller within CardBus card that are inserted in the U132 adapter.
156
157 This driver has been tested with a CardBus OHCI USB adapter, and
158 worked with a USB PEN Drive inserted into the first USB port of
159 the PCCARD. A rather pointless thing to do, but useful for testing.
160
161 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
162
163 It is safe to say M here.
164
akpm@osdl.org069e8a62006-05-26 13:17:09 -0700165config USB_APPLEDISPLAY
166 tristate "Apple Cinema Display support"
167 depends on USB
168 select BACKLIGHT_LCD_SUPPORT
169 select BACKLIGHT_CLASS_DEVICE
170 help
171 Say Y here if you want to control the backlight of Apple Cinema
172 Displays over USB. This driver provides a sysfs interface.
173
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174source "drivers/usb/misc/sisusbvga/Kconfig"
175
Michael Hund2824bd22005-06-27 22:44:22 +0200176config USB_LD
177 tristate "USB LD driver"
Michael Hund343a65c2006-02-02 09:37:02 +0100178 depends on USB
Michael Hund2824bd22005-06-27 22:44:22 +0200179 help
180 This driver is for generic USB devices that use interrupt transfers,
181 like LD Didactic's USB devices.
182
183 To compile this driver as a module, choose M here: the
184 module will be called ldusb.
185
Greg Kroah-Hartman9fcde232006-10-10 13:47:35 -0700186config USB_TRANCEVIBRATOR
187 tristate "PlayStation 2 Trance Vibrator driver support"
188 depends on USB
189 help
190 Say Y here if you want to connect a PlayStation 2 Trance Vibrator
191 device to your computer's USB port.
192
193 To compile this driver as a module, choose M here: the
194 module will be called trancevibrator.
195
Greg Kroah-Hartman946b9602007-02-14 13:40:14 -0800196config USB_IOWARRIOR
197 tristate "IO Warrior driver support"
198 depends on USB
199 help
200 Say Y here if you want to support the IO Warrior devices from Code
201 Mercenaries. This includes support for the following devices:
202 IO Warrior 40
203 IO Warrior 24
204 IO Warrior 56
205 IO Warrior 24 Power Vampire
206
207 To compile this driver as a module, choose M here: the
208 module will be called iowarrior.
209
Linus Torvalds1da177e2005-04-16 15:20:36 -0700210config USB_TEST
Robert P. J. Daybce62c22008-03-08 02:46:57 -0500211 tristate "USB testing driver"
Alan Stern0f157ef2009-07-28 11:56:17 -0400212 depends on USB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213 help
214 This driver is for testing host controller software. It is used
215 with specialized device firmware for regression and stress testing,
216 to help prevent problems from cropping up with "real" drivers.
217
218 See <http://www.linux-usb.org/usbtest/> for more information,
219 including sample test device firmware and "how to use it".
220
Matthew Garrett62d104d2008-05-20 20:06:28 +0100221config USB_ISIGHTFW
222 tristate "iSight firmware loading support"
223 depends on USB
Ingo Molnar6460a262008-06-02 21:21:03 +0200224 select FW_LOADER
Matthew Garrett62d104d2008-05-20 20:06:28 +0100225 help
226 This driver loads firmware for USB Apple iSight cameras, allowing
227 them to be driven by the USB video class driver available at
228 http://linux-uvc.berlios.de
229
230 The firmware for this driver must be extracted from the MacOS
231 driver beforehand. Tools for doing so are available at
232 http://bersace03.free.fr
Stephen Warecbc30112008-09-30 11:39:38 -0700233