Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 1 | /* |
| 2 | * TI DA830/OMAP L137 EVM board |
| 3 | * |
| 4 | * Author: Mark A. Greer <mgreer@mvista.com> |
| 5 | * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c |
| 6 | * |
| 7 | * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under |
| 8 | * the terms of the GNU General Public License version 2. This program |
| 9 | * is licensed "as is" without any warranty of any kind, whether express |
| 10 | * or implied. |
| 11 | */ |
| 12 | #include <linux/kernel.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 13 | #include <linux/init.h> |
| 14 | #include <linux/console.h> |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 15 | #include <linux/interrupt.h> |
Steve Chen | 13e1f04 | 2009-09-15 18:15:06 -0700 | [diff] [blame] | 16 | #include <linux/gpio.h> |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 17 | #include <linux/platform_device.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 18 | #include <linux/i2c.h> |
Steve Chen | 13e1f04 | 2009-09-15 18:15:06 -0700 | [diff] [blame] | 19 | #include <linux/i2c/pcf857x.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 20 | #include <linux/i2c/at24.h> |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 21 | #include <linux/mtd/mtd.h> |
| 22 | #include <linux/mtd/partitions.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 23 | |
| 24 | #include <asm/mach-types.h> |
| 25 | #include <asm/mach/arch.h> |
| 26 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 27 | #include <mach/cp_intc.h> |
Mark A. Greer | 32bf078 | 2009-08-28 15:05:21 -0700 | [diff] [blame] | 28 | #include <mach/mux.h> |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 29 | #include <mach/nand.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 30 | #include <mach/da8xx.h> |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 31 | #include <mach/usb.h> |
Sudhakar Rajashekhara | 217f136 | 2010-08-09 15:46:38 +0530 | [diff] [blame] | 32 | #include <mach/aemif.h> |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 33 | |
Cyril Chemparathy | 782f2d7 | 2010-09-15 10:11:25 -0400 | [diff] [blame] | 34 | #define DA830_EVM_PHY_ID "" |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 35 | /* |
| 36 | * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. |
| 37 | */ |
| 38 | #define ON_BD_USB_DRV GPIO_TO_PIN(1, 15) |
| 39 | #define ON_BD_USB_OVC GPIO_TO_PIN(2, 4) |
| 40 | |
| 41 | static const short da830_evm_usb11_pins[] = { |
| 42 | DA830_GPIO1_15, DA830_GPIO2_4, |
| 43 | -1 |
| 44 | }; |
| 45 | |
| 46 | static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; |
| 47 | |
| 48 | static int da830_evm_usb_set_power(unsigned port, int on) |
| 49 | { |
| 50 | gpio_set_value(ON_BD_USB_DRV, on); |
| 51 | return 0; |
| 52 | } |
| 53 | |
| 54 | static int da830_evm_usb_get_power(unsigned port) |
| 55 | { |
| 56 | return gpio_get_value(ON_BD_USB_DRV); |
| 57 | } |
| 58 | |
| 59 | static int da830_evm_usb_get_oci(unsigned port) |
| 60 | { |
| 61 | return !gpio_get_value(ON_BD_USB_OVC); |
| 62 | } |
| 63 | |
| 64 | static irqreturn_t da830_evm_usb_ocic_irq(int, void *); |
| 65 | |
| 66 | static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) |
| 67 | { |
| 68 | int irq = gpio_to_irq(ON_BD_USB_OVC); |
| 69 | int error = 0; |
| 70 | |
| 71 | if (handler != NULL) { |
| 72 | da830_evm_usb_ocic_handler = handler; |
| 73 | |
| 74 | error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | |
| 75 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| 76 | "OHCI over-current indicator", NULL); |
| 77 | if (error) |
| 78 | printk(KERN_ERR "%s: could not request IRQ to watch " |
| 79 | "over-current indicator changes\n", __func__); |
| 80 | } else |
| 81 | free_irq(irq, NULL); |
| 82 | |
| 83 | return error; |
| 84 | } |
| 85 | |
| 86 | static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { |
| 87 | .set_power = da830_evm_usb_set_power, |
| 88 | .get_power = da830_evm_usb_get_power, |
| 89 | .get_oci = da830_evm_usb_get_oci, |
| 90 | .ocic_notify = da830_evm_usb_ocic_notify, |
| 91 | |
| 92 | /* TPS2065 switch @ 5V */ |
| 93 | .potpgt = (3 + 1) / 2, /* 3 ms max */ |
| 94 | }; |
| 95 | |
| 96 | static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) |
| 97 | { |
| 98 | da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); |
| 99 | return IRQ_HANDLED; |
| 100 | } |
| 101 | |
| 102 | static __init void da830_evm_usb_init(void) |
| 103 | { |
| 104 | u32 cfgchip2; |
| 105 | int ret; |
| 106 | |
| 107 | /* |
| 108 | * Set up USB clock/mode in the CFGCHIP2 register. |
| 109 | * FYI: CFGCHIP2 is 0x0000ef00 initially. |
| 110 | */ |
Sekhar Nori | d2de058 | 2009-11-16 17:21:32 +0530 | [diff] [blame] | 111 | cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 112 | |
| 113 | /* USB2.0 PHY reference clock is 24 MHz */ |
| 114 | cfgchip2 &= ~CFGCHIP2_REFFREQ; |
| 115 | cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; |
| 116 | |
| 117 | /* |
| 118 | * Select internal reference clock for USB 2.0 PHY |
| 119 | * and use it as a clock source for USB 1.1 PHY |
| 120 | * (this is the default setting anyway). |
| 121 | */ |
| 122 | cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; |
| 123 | cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; |
| 124 | |
Sergei Shtylyov | ca6a272 | 2009-10-30 23:52:04 +0400 | [diff] [blame] | 125 | /* |
| 126 | * We have to override VBUS/ID signals when MUSB is configured into the |
| 127 | * host-only mode -- ID pin will float if no cable is connected, so the |
| 128 | * controller won't be able to drive VBUS thinking that it's a B-device. |
| 129 | * Otherwise, we want to use the OTG mode and enable VBUS comparators. |
| 130 | */ |
| 131 | cfgchip2 &= ~CFGCHIP2_OTGMODE; |
| 132 | #ifdef CONFIG_USB_MUSB_HOST |
| 133 | cfgchip2 |= CFGCHIP2_FORCE_HOST; |
| 134 | #else |
| 135 | cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; |
| 136 | #endif |
| 137 | |
Sekhar Nori | d2de058 | 2009-11-16 17:21:32 +0530 | [diff] [blame] | 138 | __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 139 | |
Sergei Shtylyov | ca6a272 | 2009-10-30 23:52:04 +0400 | [diff] [blame] | 140 | /* USB_REFCLKIN is not used. */ |
| 141 | ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); |
| 142 | if (ret) |
| 143 | pr_warning("%s: USB 2.0 PinMux setup failed: %d\n", |
| 144 | __func__, ret); |
| 145 | else { |
| 146 | /* |
| 147 | * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A), |
| 148 | * with the power on to power good time of 3 ms. |
| 149 | */ |
| 150 | ret = da8xx_register_usb20(1000, 3); |
| 151 | if (ret) |
| 152 | pr_warning("%s: USB 2.0 registration failed: %d\n", |
| 153 | __func__, ret); |
| 154 | } |
| 155 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 156 | ret = davinci_cfg_reg_list(da830_evm_usb11_pins); |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 157 | if (ret) { |
| 158 | pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", |
| 159 | __func__, ret); |
| 160 | return; |
| 161 | } |
| 162 | |
| 163 | ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); |
| 164 | if (ret) { |
| 165 | printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " |
| 166 | "power control: %d\n", __func__, ret); |
| 167 | return; |
| 168 | } |
| 169 | gpio_direction_output(ON_BD_USB_DRV, 0); |
| 170 | |
| 171 | ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); |
| 172 | if (ret) { |
| 173 | printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " |
| 174 | "over-current indicator: %d\n", __func__, ret); |
| 175 | return; |
| 176 | } |
| 177 | gpio_direction_input(ON_BD_USB_OVC); |
| 178 | |
| 179 | ret = da8xx_register_usb11(&da830_evm_usb11_pdata); |
| 180 | if (ret) |
| 181 | pr_warning("%s: USB 1.1 registration failed: %d\n", |
| 182 | __func__, ret); |
| 183 | } |
| 184 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 185 | static struct davinci_uart_config da830_evm_uart_config __initdata = { |
| 186 | .enabled_uarts = 0x7, |
| 187 | }; |
| 188 | |
Mark A. Greer | 32bf078 | 2009-08-28 15:05:21 -0700 | [diff] [blame] | 189 | static const short da830_evm_mcasp1_pins[] = { |
| 190 | DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, |
| 191 | DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, |
| 192 | DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10, |
| 193 | DA830_AXR1_11, |
| 194 | -1 |
| 195 | }; |
| 196 | |
Chaithrika U S | e33ef5e | 2009-08-11 17:01:59 -0400 | [diff] [blame] | 197 | static u8 da830_iis_serializer_direction[] = { |
| 198 | RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, |
| 199 | INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, |
| 200 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, |
| 201 | }; |
| 202 | |
| 203 | static struct snd_platform_data da830_evm_snd_data = { |
| 204 | .tx_dma_offset = 0x2000, |
| 205 | .rx_dma_offset = 0x2000, |
| 206 | .op_mode = DAVINCI_MCASP_IIS_MODE, |
| 207 | .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction), |
| 208 | .tdm_slots = 2, |
| 209 | .serial_dir = da830_iis_serializer_direction, |
Sekhar Nori | 48519f0 | 2010-07-19 12:31:16 +0530 | [diff] [blame] | 210 | .asp_chan_q = EVENTQ_0, |
Chaithrika U S | e33ef5e | 2009-08-11 17:01:59 -0400 | [diff] [blame] | 211 | .version = MCASP_VERSION_2, |
| 212 | .txnumevt = 1, |
| 213 | .rxnumevt = 1, |
| 214 | }; |
| 215 | |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 216 | /* |
| 217 | * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. |
| 218 | */ |
| 219 | static const short da830_evm_mmc_sd_pins[] = { |
| 220 | DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, |
| 221 | DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, |
| 222 | DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, |
| 223 | DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2, |
| 224 | -1 |
| 225 | }; |
| 226 | |
| 227 | #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) |
Vipin Bhandari | 8ccfd3f | 2010-03-10 14:03:01 +0530 | [diff] [blame] | 228 | #define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 229 | |
| 230 | static int da830_evm_mmc_get_ro(int index) |
| 231 | { |
| 232 | return gpio_get_value(DA830_MMCSD_WP_PIN); |
| 233 | } |
| 234 | |
Vipin Bhandari | 8ccfd3f | 2010-03-10 14:03:01 +0530 | [diff] [blame] | 235 | static int da830_evm_mmc_get_cd(int index) |
| 236 | { |
| 237 | return !gpio_get_value(DA830_MMCSD_CD_PIN); |
| 238 | } |
| 239 | |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 240 | static struct davinci_mmc_config da830_evm_mmc_config = { |
| 241 | .get_ro = da830_evm_mmc_get_ro, |
Vipin Bhandari | 8ccfd3f | 2010-03-10 14:03:01 +0530 | [diff] [blame] | 242 | .get_cd = da830_evm_mmc_get_cd, |
Vipin Bhandari | d154fed | 2010-03-10 14:03:02 +0530 | [diff] [blame] | 243 | .wires = 8, |
Chaithrika U S | 0046d0b | 2009-11-03 15:46:14 +0530 | [diff] [blame] | 244 | .max_freq = 50000000, |
| 245 | .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 246 | .version = MMC_CTLR_VERSION_2, |
| 247 | }; |
| 248 | |
| 249 | static inline void da830_evm_init_mmc(void) |
| 250 | { |
| 251 | int ret; |
| 252 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 253 | ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins); |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 254 | if (ret) { |
| 255 | pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", |
| 256 | ret); |
| 257 | return; |
| 258 | } |
| 259 | |
| 260 | ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); |
| 261 | if (ret) { |
| 262 | pr_warning("da830_evm_init: can not open GPIO %d\n", |
| 263 | DA830_MMCSD_WP_PIN); |
| 264 | return; |
| 265 | } |
| 266 | gpio_direction_input(DA830_MMCSD_WP_PIN); |
| 267 | |
Vipin Bhandari | 8ccfd3f | 2010-03-10 14:03:01 +0530 | [diff] [blame] | 268 | ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); |
| 269 | if (ret) { |
| 270 | pr_warning("da830_evm_init: can not open GPIO %d\n", |
| 271 | DA830_MMCSD_CD_PIN); |
| 272 | return; |
| 273 | } |
| 274 | gpio_direction_input(DA830_MMCSD_CD_PIN); |
| 275 | |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 276 | ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); |
| 277 | if (ret) { |
| 278 | pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", |
| 279 | ret); |
| 280 | gpio_free(DA830_MMCSD_WP_PIN); |
| 281 | } |
| 282 | } |
| 283 | |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 284 | /* |
| 285 | * UI board NAND/NOR flashes only use 8-bit data bus. |
| 286 | */ |
| 287 | static const short da830_evm_emif25_pins[] = { |
| 288 | DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, |
| 289 | DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, |
| 290 | DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, |
| 291 | DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, |
| 292 | DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, |
| 293 | DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE, |
| 294 | DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0, |
| 295 | -1 |
| 296 | }; |
| 297 | |
Sekhar Nori | b5ebe4e | 2009-10-21 21:18:21 +0530 | [diff] [blame] | 298 | #if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) |
| 299 | #define HAS_MMC 1 |
| 300 | #else |
| 301 | #define HAS_MMC 0 |
| 302 | #endif |
| 303 | |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 304 | #ifdef CONFIG_DA830_UI_NAND |
| 305 | static struct mtd_partition da830_evm_nand_partitions[] = { |
| 306 | /* bootloader (U-Boot, etc) in first sector */ |
| 307 | [0] = { |
| 308 | .name = "bootloader", |
| 309 | .offset = 0, |
| 310 | .size = SZ_128K, |
| 311 | .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| 312 | }, |
| 313 | /* bootloader params in the next sector */ |
| 314 | [1] = { |
| 315 | .name = "params", |
| 316 | .offset = MTDPART_OFS_APPEND, |
| 317 | .size = SZ_128K, |
| 318 | .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| 319 | }, |
| 320 | /* kernel */ |
| 321 | [2] = { |
| 322 | .name = "kernel", |
| 323 | .offset = MTDPART_OFS_APPEND, |
| 324 | .size = SZ_2M, |
| 325 | .mask_flags = 0, |
| 326 | }, |
| 327 | /* file system */ |
| 328 | [3] = { |
| 329 | .name = "filesystem", |
| 330 | .offset = MTDPART_OFS_APPEND, |
| 331 | .size = MTDPART_SIZ_FULL, |
| 332 | .mask_flags = 0, |
| 333 | } |
| 334 | }; |
| 335 | |
| 336 | /* flash bbt decriptors */ |
| 337 | static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' }; |
| 338 | static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' }; |
| 339 | |
| 340 | static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = { |
| 341 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | |
| 342 | NAND_BBT_WRITE | NAND_BBT_2BIT | |
| 343 | NAND_BBT_VERSION | NAND_BBT_PERCHIP, |
| 344 | .offs = 2, |
| 345 | .len = 4, |
| 346 | .veroffs = 16, |
| 347 | .maxblocks = 4, |
| 348 | .pattern = da830_evm_nand_bbt_pattern |
| 349 | }; |
| 350 | |
| 351 | static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { |
| 352 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | |
| 353 | NAND_BBT_WRITE | NAND_BBT_2BIT | |
| 354 | NAND_BBT_VERSION | NAND_BBT_PERCHIP, |
| 355 | .offs = 2, |
| 356 | .len = 4, |
| 357 | .veroffs = 16, |
| 358 | .maxblocks = 4, |
| 359 | .pattern = da830_evm_nand_mirror_pattern |
| 360 | }; |
| 361 | |
Sudhakar Rajashekhara | 217f136 | 2010-08-09 15:46:38 +0530 | [diff] [blame] | 362 | static struct davinci_aemif_timing da830_evm_nandflash_timing = { |
| 363 | .wsetup = 24, |
| 364 | .wstrobe = 21, |
| 365 | .whold = 14, |
| 366 | .rsetup = 19, |
| 367 | .rstrobe = 50, |
| 368 | .rhold = 0, |
| 369 | .ta = 20, |
| 370 | }; |
| 371 | |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 372 | static struct davinci_nand_pdata da830_evm_nand_pdata = { |
| 373 | .parts = da830_evm_nand_partitions, |
| 374 | .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), |
| 375 | .ecc_mode = NAND_ECC_HW, |
| 376 | .ecc_bits = 4, |
| 377 | .options = NAND_USE_FLASH_BBT, |
| 378 | .bbt_td = &da830_evm_nand_bbt_main_descr, |
| 379 | .bbt_md = &da830_evm_nand_bbt_mirror_descr, |
Sudhakar Rajashekhara | 217f136 | 2010-08-09 15:46:38 +0530 | [diff] [blame] | 380 | .timing = &da830_evm_nandflash_timing, |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 381 | }; |
| 382 | |
| 383 | static struct resource da830_evm_nand_resources[] = { |
| 384 | [0] = { /* First memory resource is NAND I/O window */ |
Sergei Shtylyov | 002cb2d | 2010-04-16 21:29:20 +0400 | [diff] [blame] | 385 | .start = DA8XX_AEMIF_CS3_BASE, |
| 386 | .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1, |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 387 | .flags = IORESOURCE_MEM, |
| 388 | }, |
| 389 | [1] = { /* Second memory resource is AEMIF control registers */ |
Sergei Shtylyov | 002cb2d | 2010-04-16 21:29:20 +0400 | [diff] [blame] | 390 | .start = DA8XX_AEMIF_CTL_BASE, |
| 391 | .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 392 | .flags = IORESOURCE_MEM, |
| 393 | }, |
| 394 | }; |
| 395 | |
| 396 | static struct platform_device da830_evm_nand_device = { |
| 397 | .name = "davinci_nand", |
| 398 | .id = 1, |
| 399 | .dev = { |
| 400 | .platform_data = &da830_evm_nand_pdata, |
| 401 | }, |
| 402 | .num_resources = ARRAY_SIZE(da830_evm_nand_resources), |
| 403 | .resource = da830_evm_nand_resources, |
| 404 | }; |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 405 | |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 406 | static inline void da830_evm_init_nand(int mux_mode) |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 407 | { |
| 408 | int ret; |
| 409 | |
Sekhar Nori | b5ebe4e | 2009-10-21 21:18:21 +0530 | [diff] [blame] | 410 | if (HAS_MMC) { |
| 411 | pr_warning("WARNING: both MMC/SD and NAND are " |
| 412 | "enabled, but they share AEMIF pins.\n" |
| 413 | "\tDisable MMC/SD for NAND support.\n"); |
| 414 | return; |
| 415 | } |
| 416 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 417 | ret = davinci_cfg_reg_list(da830_evm_emif25_pins); |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 418 | if (ret) |
| 419 | pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", |
| 420 | ret); |
| 421 | |
| 422 | ret = platform_device_register(&da830_evm_nand_device); |
| 423 | if (ret) |
| 424 | pr_warning("da830_evm_init: NAND device not registered.\n"); |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 425 | |
| 426 | gpio_direction_output(mux_mode, 1); |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 427 | } |
| 428 | #else |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 429 | static inline void da830_evm_init_nand(int mux_mode) { } |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 430 | #endif |
| 431 | |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 432 | #ifdef CONFIG_DA830_UI_LCD |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 433 | static inline void da830_evm_init_lcdc(int mux_mode) |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 434 | { |
| 435 | int ret; |
| 436 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 437 | ret = davinci_cfg_reg_list(da830_lcdcntl_pins); |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 438 | if (ret) |
| 439 | pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", |
| 440 | ret); |
| 441 | |
| 442 | ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata); |
| 443 | if (ret) |
| 444 | pr_warning("da830_evm_init: lcd setup failed: %d\n", ret); |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 445 | |
| 446 | gpio_direction_output(mux_mode, 0); |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 447 | } |
| 448 | #else |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 449 | static inline void da830_evm_init_lcdc(int mux_mode) { } |
Sekhar Nori | a0433ac | 2009-10-09 20:55:43 +0530 | [diff] [blame] | 450 | #endif |
David A. Griego | 733975a | 2009-09-18 14:15:18 -0700 | [diff] [blame] | 451 | |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 452 | static struct at24_platform_data da830_evm_i2c_eeprom_info = { |
| 453 | .byte_len = SZ_256K / 8, |
| 454 | .page_size = 64, |
| 455 | .flags = AT24_FLAG_ADDR16, |
| 456 | .setup = davinci_get_mac_addr, |
| 457 | .context = (void *)0x7f00, |
| 458 | }; |
| 459 | |
Sudhakar Rajashekhara | 1ef203c | 2009-11-03 11:51:19 +0530 | [diff] [blame] | 460 | static int __init da830_evm_ui_expander_setup(struct i2c_client *client, |
| 461 | int gpio, unsigned ngpio, void *context) |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 462 | { |
| 463 | gpio_request(gpio + 6, "UI MUX_MODE"); |
| 464 | |
Sekhar Nori | b5ebe4e | 2009-10-21 21:18:21 +0530 | [diff] [blame] | 465 | /* Drive mux mode low to match the default without UI card */ |
| 466 | gpio_direction_output(gpio + 6, 0); |
| 467 | |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 468 | da830_evm_init_lcdc(gpio + 6); |
| 469 | |
| 470 | da830_evm_init_nand(gpio + 6); |
| 471 | |
| 472 | return 0; |
| 473 | } |
| 474 | |
| 475 | static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, |
| 476 | unsigned ngpio, void *context) |
| 477 | { |
| 478 | gpio_free(gpio + 6); |
| 479 | return 0; |
| 480 | } |
| 481 | |
Sudhakar Rajashekhara | 1ef203c | 2009-11-03 11:51:19 +0530 | [diff] [blame] | 482 | static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { |
Sekhar Nori | 77316f0 | 2009-10-21 21:18:20 +0530 | [diff] [blame] | 483 | .gpio_base = DAVINCI_N_GPIO, |
| 484 | .setup = da830_evm_ui_expander_setup, |
| 485 | .teardown = da830_evm_ui_expander_teardown, |
| 486 | }; |
| 487 | |
| 488 | static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { |
| 489 | { |
| 490 | I2C_BOARD_INFO("24c256", 0x50), |
| 491 | .platform_data = &da830_evm_i2c_eeprom_info, |
| 492 | }, |
| 493 | { |
| 494 | I2C_BOARD_INFO("tlv320aic3x", 0x18), |
| 495 | }, |
| 496 | { |
| 497 | I2C_BOARD_INFO("pcf8574", 0x3f), |
| 498 | .platform_data = &da830_evm_ui_expander_info, |
| 499 | }, |
| 500 | }; |
| 501 | |
| 502 | static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { |
| 503 | .bus_freq = 100, /* kHz */ |
| 504 | .bus_delay = 0, /* usec */ |
| 505 | }; |
| 506 | |
Rajashekhara, Sudhakar | a941c50 | 2010-06-29 11:35:14 +0530 | [diff] [blame] | 507 | /* |
| 508 | * The following EDMA channels/slots are not being used by drivers (for |
| 509 | * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence |
| 510 | * they are being reserved for codecs on the DSP side. |
| 511 | */ |
| 512 | static const s16 da830_dma_rsv_chans[][2] = { |
| 513 | /* (offset, number) */ |
| 514 | { 8, 2}, |
| 515 | {12, 2}, |
| 516 | {24, 4}, |
| 517 | {30, 2}, |
| 518 | {-1, -1} |
| 519 | }; |
| 520 | |
| 521 | static const s16 da830_dma_rsv_slots[][2] = { |
| 522 | /* (offset, number) */ |
| 523 | { 8, 2}, |
| 524 | {12, 2}, |
| 525 | {24, 4}, |
| 526 | {30, 26}, |
| 527 | {-1, -1} |
| 528 | }; |
| 529 | |
| 530 | static struct edma_rsv_info da830_edma_rsv[] = { |
| 531 | { |
| 532 | .rsv_chans = da830_dma_rsv_chans, |
| 533 | .rsv_slots = da830_dma_rsv_slots, |
| 534 | }, |
| 535 | }; |
| 536 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 537 | static __init void da830_evm_init(void) |
| 538 | { |
| 539 | struct davinci_soc_info *soc_info = &davinci_soc_info; |
| 540 | int ret; |
| 541 | |
Rajashekhara, Sudhakar | a941c50 | 2010-06-29 11:35:14 +0530 | [diff] [blame] | 542 | ret = da830_register_edma(da830_edma_rsv); |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 543 | if (ret) |
| 544 | pr_warning("da830_evm_init: edma registration failed: %d\n", |
| 545 | ret); |
| 546 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 547 | ret = davinci_cfg_reg_list(da830_i2c0_pins); |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 548 | if (ret) |
| 549 | pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n", |
| 550 | ret); |
| 551 | |
| 552 | ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata); |
| 553 | if (ret) |
| 554 | pr_warning("da830_evm_init: i2c0 registration failed: %d\n", |
| 555 | ret); |
| 556 | |
Sergei Shtylyov | 0e9a3dd | 2009-09-25 23:28:13 +0400 | [diff] [blame] | 557 | da830_evm_usb_init(); |
| 558 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 559 | soc_info->emac_pdata->rmii_en = 1; |
Cyril Chemparathy | 782f2d7 | 2010-09-15 10:11:25 -0400 | [diff] [blame] | 560 | soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID; |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 561 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 562 | ret = davinci_cfg_reg_list(da830_cpgmac_pins); |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 563 | if (ret) |
| 564 | pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n", |
| 565 | ret); |
| 566 | |
| 567 | ret = da8xx_register_emac(); |
| 568 | if (ret) |
| 569 | pr_warning("da830_evm_init: emac registration failed: %d\n", |
| 570 | ret); |
| 571 | |
| 572 | ret = da8xx_register_watchdog(); |
| 573 | if (ret) |
| 574 | pr_warning("da830_evm_init: watchdog registration failed: %d\n", |
| 575 | ret); |
| 576 | |
| 577 | davinci_serial_init(&da830_evm_uart_config); |
| 578 | i2c_register_board_info(1, da830_evm_i2c_devices, |
| 579 | ARRAY_SIZE(da830_evm_i2c_devices)); |
Chaithrika U S | e33ef5e | 2009-08-11 17:01:59 -0400 | [diff] [blame] | 580 | |
Cyril Chemparathy | 3821d10 | 2010-03-25 17:43:48 -0400 | [diff] [blame] | 581 | ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins); |
Chaithrika U S | e33ef5e | 2009-08-11 17:01:59 -0400 | [diff] [blame] | 582 | if (ret) |
| 583 | pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", |
| 584 | ret); |
| 585 | |
Mark A. Greer | b8864aa | 2009-08-28 15:05:02 -0700 | [diff] [blame] | 586 | da8xx_register_mcasp(1, &da830_evm_snd_data); |
David A. Griego | 2eb30c8 | 2009-09-15 18:10:20 -0700 | [diff] [blame] | 587 | |
| 588 | da830_evm_init_mmc(); |
Steve Chen | 13e1f04 | 2009-09-15 18:15:06 -0700 | [diff] [blame] | 589 | |
Mark A. Greer | c51df70 | 2009-09-15 18:15:54 -0700 | [diff] [blame] | 590 | ret = da8xx_register_rtc(); |
| 591 | if (ret) |
| 592 | pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 593 | } |
| 594 | |
| 595 | #ifdef CONFIG_SERIAL_8250_CONSOLE |
| 596 | static int __init da830_evm_console_init(void) |
| 597 | { |
Michael Williamson | 1aa5f2a | 2010-08-31 14:30:15 -0400 | [diff] [blame] | 598 | if (!machine_is_davinci_da830_evm()) |
| 599 | return 0; |
| 600 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 601 | return add_preferred_console("ttyS", 2, "115200"); |
| 602 | } |
| 603 | console_initcall(da830_evm_console_init); |
| 604 | #endif |
| 605 | |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 606 | static void __init da830_evm_map_io(void) |
| 607 | { |
| 608 | da830_init(); |
| 609 | } |
| 610 | |
Sekhar Nori | 48ea89e | 2010-07-01 19:00:50 +0530 | [diff] [blame] | 611 | MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 612 | .boot_params = (DA8XX_DDR_BASE + 0x100), |
| 613 | .map_io = da830_evm_map_io, |
Cyril Chemparathy | bd80894 | 2010-05-07 17:06:37 -0400 | [diff] [blame] | 614 | .init_irq = cp_intc_init, |
Mark A. Greer | 8593790 | 2009-06-03 18:41:53 -0700 | [diff] [blame] | 615 | .timer = &davinci_timer, |
| 616 | .init_machine = da830_evm_init, |
| 617 | MACHINE_END |