blob: f53e63301a2054d7a822f5017a8e9a2d7d5a35b4 [file] [log] [blame]
Milo Kim3a8d1a72015-11-26 15:57:05 +09001/*
2 * TI LM363X Regulator Driver
3 *
4 * Copyright 2015 Texas Instruments
5 *
6 * Author: Milo Kim <milo.kim@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/err.h>
14#include <linux/kernel.h>
15#include <linux/mfd/ti-lmu.h>
16#include <linux/mfd/ti-lmu-register.h>
17#include <linux/module.h>
18#include <linux/of.h>
19#include <linux/of_gpio.h>
20#include <linux/platform_device.h>
21#include <linux/regulator/driver.h>
22#include <linux/regulator/of_regulator.h>
23#include <linux/slab.h>
24
25/* LM3631 */
26#define LM3631_BOOST_VSEL_MAX 0x25
27#define LM3631_LDO_VSEL_MAX 0x28
28#define LM3631_CONT_VSEL_MAX 0x03
29#define LM3631_VBOOST_MIN 4500000
30#define LM3631_VCONT_MIN 1800000
31#define LM3631_VLDO_MIN 4000000
32#define ENABLE_TIME_USEC 1000
33
34/* LM3632 */
35#define LM3632_BOOST_VSEL_MAX 0x26
36#define LM3632_LDO_VSEL_MAX 0x29
37#define LM3632_VBOOST_MIN 4500000
38#define LM3632_VLDO_MIN 4000000
39
40/* Common */
41#define LM363X_STEP_50mV 50000
42#define LM363X_STEP_500mV 500000
43
Axel Linfaa5cf32015-11-29 15:02:21 +080044static const int ldo_cont_enable_time[] = {
Milo Kim3a8d1a72015-11-26 15:57:05 +090045 0, 2000, 5000, 10000, 20000, 50000, 100000, 200000,
46};
47
48static int lm363x_regulator_enable_time(struct regulator_dev *rdev)
49{
Milo Kim3a8d1a72015-11-26 15:57:05 +090050 enum lm363x_regulator_id id = rdev_get_id(rdev);
51 u8 val, addr, mask;
52
53 switch (id) {
54 case LM3631_LDO_CONT:
55 addr = LM3631_REG_ENTIME_VCONT;
56 mask = LM3631_ENTIME_CONT_MASK;
57 break;
58 case LM3631_LDO_OREF:
59 addr = LM3631_REG_ENTIME_VOREF;
60 mask = LM3631_ENTIME_MASK;
61 break;
62 case LM3631_LDO_POS:
63 addr = LM3631_REG_ENTIME_VPOS;
64 mask = LM3631_ENTIME_MASK;
65 break;
66 case LM3631_LDO_NEG:
67 addr = LM3631_REG_ENTIME_VNEG;
68 mask = LM3631_ENTIME_MASK;
69 break;
70 default:
71 return 0;
72 }
73
Axel Lina8bc6ca2015-11-29 14:58:54 +080074 if (regmap_read(rdev->regmap, addr, (unsigned int *)&val))
Milo Kim3a8d1a72015-11-26 15:57:05 +090075 return -EINVAL;
76
77 val = (val & mask) >> LM3631_ENTIME_SHIFT;
78
79 if (id == LM3631_LDO_CONT)
80 return ldo_cont_enable_time[val];
81 else
82 return ENABLE_TIME_USEC * val;
83}
84
85static struct regulator_ops lm363x_boost_voltage_table_ops = {
86 .list_voltage = regulator_list_voltage_linear,
87 .set_voltage_sel = regulator_set_voltage_sel_regmap,
88 .get_voltage_sel = regulator_get_voltage_sel_regmap,
89};
90
91static struct regulator_ops lm363x_regulator_voltage_table_ops = {
92 .list_voltage = regulator_list_voltage_linear,
93 .set_voltage_sel = regulator_set_voltage_sel_regmap,
94 .get_voltage_sel = regulator_get_voltage_sel_regmap,
95 .enable = regulator_enable_regmap,
96 .disable = regulator_disable_regmap,
97 .is_enabled = regulator_is_enabled_regmap,
98 .enable_time = lm363x_regulator_enable_time,
99};
100
101static const struct regulator_desc lm363x_regulator_desc[] = {
102 /* LM3631 */
103 {
104 .name = "vboost",
105 .of_match = "vboost",
106 .id = LM3631_BOOST,
107 .ops = &lm363x_boost_voltage_table_ops,
108 .n_voltages = LM3631_BOOST_VSEL_MAX + 1,
109 .min_uV = LM3631_VBOOST_MIN,
110 .uV_step = LM363X_STEP_50mV,
111 .type = REGULATOR_VOLTAGE,
112 .owner = THIS_MODULE,
113 .vsel_reg = LM3631_REG_VOUT_BOOST,
114 .vsel_mask = LM3631_VOUT_MASK,
115 },
116 {
117 .name = "ldo_cont",
118 .of_match = "vcont",
119 .id = LM3631_LDO_CONT,
120 .ops = &lm363x_regulator_voltage_table_ops,
121 .n_voltages = LM3631_CONT_VSEL_MAX + 1,
122 .min_uV = LM3631_VCONT_MIN,
123 .uV_step = LM363X_STEP_500mV,
124 .type = REGULATOR_VOLTAGE,
125 .owner = THIS_MODULE,
126 .vsel_reg = LM3631_REG_VOUT_CONT,
127 .vsel_mask = LM3631_VOUT_CONT_MASK,
128 .enable_reg = LM3631_REG_LDO_CTRL2,
129 .enable_mask = LM3631_EN_CONT_MASK,
130 },
131 {
132 .name = "ldo_oref",
133 .of_match = "voref",
134 .id = LM3631_LDO_OREF,
135 .ops = &lm363x_regulator_voltage_table_ops,
136 .n_voltages = LM3631_LDO_VSEL_MAX + 1,
137 .min_uV = LM3631_VLDO_MIN,
138 .uV_step = LM363X_STEP_50mV,
139 .type = REGULATOR_VOLTAGE,
140 .owner = THIS_MODULE,
141 .vsel_reg = LM3631_REG_VOUT_OREF,
142 .vsel_mask = LM3631_VOUT_MASK,
143 .enable_reg = LM3631_REG_LDO_CTRL1,
144 .enable_mask = LM3631_EN_OREF_MASK,
145 },
146 {
147 .name = "ldo_vpos",
148 .of_match = "vpos",
149 .id = LM3631_LDO_POS,
150 .ops = &lm363x_regulator_voltage_table_ops,
151 .n_voltages = LM3631_LDO_VSEL_MAX + 1,
152 .min_uV = LM3631_VLDO_MIN,
153 .uV_step = LM363X_STEP_50mV,
154 .type = REGULATOR_VOLTAGE,
155 .owner = THIS_MODULE,
156 .vsel_reg = LM3631_REG_VOUT_POS,
157 .vsel_mask = LM3631_VOUT_MASK,
158 .enable_reg = LM3631_REG_LDO_CTRL1,
159 .enable_mask = LM3631_EN_VPOS_MASK,
160 },
161 {
162 .name = "ldo_vneg",
163 .of_match = "vneg",
164 .id = LM3631_LDO_NEG,
165 .ops = &lm363x_regulator_voltage_table_ops,
166 .n_voltages = LM3631_LDO_VSEL_MAX + 1,
167 .min_uV = LM3631_VLDO_MIN,
168 .uV_step = LM363X_STEP_50mV,
169 .type = REGULATOR_VOLTAGE,
170 .owner = THIS_MODULE,
171 .vsel_reg = LM3631_REG_VOUT_NEG,
172 .vsel_mask = LM3631_VOUT_MASK,
173 .enable_reg = LM3631_REG_LDO_CTRL1,
174 .enable_mask = LM3631_EN_VNEG_MASK,
175 },
176 /* LM3632 */
177 {
178 .name = "vboost",
179 .of_match = "vboost",
180 .id = LM3632_BOOST,
181 .ops = &lm363x_boost_voltage_table_ops,
182 .n_voltages = LM3632_BOOST_VSEL_MAX + 1,
183 .min_uV = LM3632_VBOOST_MIN,
184 .uV_step = LM363X_STEP_50mV,
185 .type = REGULATOR_VOLTAGE,
186 .owner = THIS_MODULE,
187 .vsel_reg = LM3632_REG_VOUT_BOOST,
188 .vsel_mask = LM3632_VOUT_MASK,
189 },
190 {
191 .name = "ldo_vpos",
192 .of_match = "vpos",
193 .id = LM3632_LDO_POS,
194 .ops = &lm363x_regulator_voltage_table_ops,
195 .n_voltages = LM3632_LDO_VSEL_MAX + 1,
196 .min_uV = LM3632_VLDO_MIN,
197 .uV_step = LM363X_STEP_50mV,
198 .type = REGULATOR_VOLTAGE,
199 .owner = THIS_MODULE,
200 .vsel_reg = LM3632_REG_VOUT_POS,
201 .vsel_mask = LM3632_VOUT_MASK,
202 .enable_reg = LM3632_REG_BIAS_CONFIG,
203 .enable_mask = LM3632_EN_VPOS_MASK,
204 },
205 {
206 .name = "ldo_vneg",
207 .of_match = "vneg",
208 .id = LM3632_LDO_NEG,
209 .ops = &lm363x_regulator_voltage_table_ops,
210 .n_voltages = LM3632_LDO_VSEL_MAX + 1,
211 .min_uV = LM3632_VLDO_MIN,
212 .uV_step = LM363X_STEP_50mV,
213 .type = REGULATOR_VOLTAGE,
214 .owner = THIS_MODULE,
215 .vsel_reg = LM3632_REG_VOUT_NEG,
216 .vsel_mask = LM3632_VOUT_MASK,
217 .enable_reg = LM3632_REG_BIAS_CONFIG,
218 .enable_mask = LM3632_EN_VNEG_MASK,
219 },
220};
221
222static int lm363x_regulator_of_get_enable_gpio(struct device_node *np, int id)
223{
224 /*
225 * Check LCM_EN1/2_GPIO is configured.
226 * Those pins are used for enabling VPOS/VNEG LDOs.
227 */
228 switch (id) {
229 case LM3632_LDO_POS:
230 return of_get_named_gpio(np, "ti,lcm-en1-gpio", 0);
231 case LM3632_LDO_NEG:
232 return of_get_named_gpio(np, "ti,lcm-en2-gpio", 0);
233 default:
234 return -EINVAL;
235 }
236}
237
238static int lm363x_regulator_probe(struct platform_device *pdev)
239{
240 struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
Milo Kim3a8d1a72015-11-26 15:57:05 +0900241 struct regmap *regmap = lmu->regmap;
242 struct regulator_config cfg = { };
243 struct regulator_dev *rdev;
244 struct device *dev = &pdev->dev;
245 int id = pdev->id;
246 int ret, ena_gpio;
247
Milo Kim3a8d1a72015-11-26 15:57:05 +0900248 cfg.dev = dev;
Milo Kim3a8d1a72015-11-26 15:57:05 +0900249 cfg.regmap = regmap;
250
251 /*
252 * LM3632 LDOs can be controlled by external pin.
253 * Register update is required if the pin is used.
254 */
255 ena_gpio = lm363x_regulator_of_get_enable_gpio(dev->of_node, id);
256 if (gpio_is_valid(ena_gpio)) {
257 cfg.ena_gpio = ena_gpio;
258 cfg.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
259
260 ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
261 LM3632_EXT_EN_MASK,
262 LM3632_EXT_EN_MASK);
263 if (ret) {
264 dev_err(dev, "External pin err: %d\n", ret);
265 return ret;
266 }
267 }
268
269 rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg);
270 if (IS_ERR(rdev)) {
271 ret = PTR_ERR(rdev);
272 dev_err(dev, "[%d] regulator register err: %d\n", id, ret);
273 return ret;
274 }
275
Milo Kim3a8d1a72015-11-26 15:57:05 +0900276 return 0;
277}
278
279static struct platform_driver lm363x_regulator_driver = {
280 .probe = lm363x_regulator_probe,
281 .driver = {
282 .name = "lm363x-regulator",
283 },
284};
285
286module_platform_driver(lm363x_regulator_driver);
287
288MODULE_DESCRIPTION("TI LM363X Regulator Driver");
289MODULE_AUTHOR("Milo Kim");
290MODULE_LICENSE("GPL v2");
291MODULE_ALIAS("platform:lm363x-regulator");