| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | dmfe.c: Version 1.28 01/18/2000 |
| 2 | |
| 3 | A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. |
| 4 | Copyright (C) 1997 Sten Wang |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or |
| 7 | modify it under the terms of the GNU General Public License |
| 8 | as published by the Free Software Foundation; either version 2 |
| 9 | of the License, or (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | GNU General Public License for more details. |
| 15 | |
| 16 | |
| 17 | A. Compiler command: |
| 18 | |
| 19 | A-1: For normal single or multiple processor kernel |
| 20 | "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall |
| 21 | -Wstrict-prototypes -O6 -c dmfe.c" |
| 22 | |
| 23 | A-2: For single or multiple processor with kernel module version function |
| 24 | "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet |
| 25 | -Wall -Wstrict-prototypes -O6 -c dmfe.c" |
| 26 | |
| 27 | |
| 28 | B. The following steps teach you how to activate a DM9102 board: |
| 29 | |
| 30 | 1. Used the upper compiler command to compile dmfe.c |
| 31 | |
| 32 | 2. Insert dmfe module into kernel |
| 33 | "insmod dmfe" ;;Auto Detection Mode (Suggest) |
| 34 | "insmod dmfe mode=0" ;;Force 10M Half Duplex |
| 35 | "insmod dmfe mode=1" ;;Force 100M Half Duplex |
| 36 | "insmod dmfe mode=4" ;;Force 10M Full Duplex |
| 37 | "insmod dmfe mode=5" ;;Force 100M Full Duplex |
| 38 | |
| 39 | 3. Config a dm9102 network interface |
| 40 | "ifconfig eth0 172.22.3.18" |
| 41 | ^^^^^^^^^^^ Your IP address |
| 42 | |
| 43 | 4. Activate the IP routing table. For some distributions, it is not |
| 44 | necessary. You can type "route" to check. |
| 45 | |
| 46 | "route add default eth0" |
| 47 | |
| 48 | |
| 49 | 5. Well done. Your DM9102 adapter is now activated. |
| 50 | |
| 51 | |
| 52 | C. Object files description: |
| 53 | 1. dmfe_rh61.o: For Redhat 6.1 |
| 54 | |
| 55 | If you can make sure your kernel version, you can rename |
| 56 | to dmfe.o and directly use it without re-compiling. |
| 57 | |
| 58 | |
| 59 | Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw |