blob: 12bd980a12e940ea8f1d38fec8332dc6ab095015 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * processor_thermal.c - Passive cooling submodule of the ACPI processor driver
3 *
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
7 * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
8 * - Added processor hotplug support
9 *
10 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or (at
15 * your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License along
23 * with this program; if not, write to the Free Software Foundation, Inc.,
24 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
25 *
26 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
27 */
28
29#include <linux/kernel.h>
30#include <linux/module.h>
31#include <linux/init.h>
32#include <linux/cpufreq.h>
33#include <linux/proc_fs.h>
34#include <linux/seq_file.h>
35
36#include <asm/uaccess.h>
37
38#include <acpi/acpi_bus.h>
39#include <acpi/processor.h>
40#include <acpi/acpi_drivers.h>
41
42#define ACPI_PROCESSOR_COMPONENT 0x01000000
43#define ACPI_PROCESSOR_CLASS "processor"
44#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
45#define _COMPONENT ACPI_PROCESSOR_COMPONENT
46ACPI_MODULE_NAME ("acpi_processor")
47
48
49/* --------------------------------------------------------------------------
50 Limit Interface
51 -------------------------------------------------------------------------- */
52
53static int
54acpi_processor_apply_limit (
55 struct acpi_processor* pr)
56{
57 int result = 0;
58 u16 px = 0;
59 u16 tx = 0;
60
61 ACPI_FUNCTION_TRACE("acpi_processor_apply_limit");
62
63 if (!pr)
64 return_VALUE(-EINVAL);
65
66 if (!pr->flags.limit)
67 return_VALUE(-ENODEV);
68
69 if (pr->flags.throttling) {
70 if (pr->limit.user.tx > tx)
71 tx = pr->limit.user.tx;
72 if (pr->limit.thermal.tx > tx)
73 tx = pr->limit.thermal.tx;
74
75 result = acpi_processor_set_throttling(pr, tx);
76 if (result)
77 goto end;
78 }
79
80 pr->limit.state.px = px;
81 pr->limit.state.tx = tx;
82
83 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d] limit set to (P%d:T%d)\n",
84 pr->id,
85 pr->limit.state.px,
86 pr->limit.state.tx));
87
88end:
89 if (result)
90 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to set limit\n"));
91
92 return_VALUE(result);
93}
94
95
96#ifdef CONFIG_CPU_FREQ
97
98/* If a passive cooling situation is detected, primarily CPUfreq is used, as it
99 * offers (in most cases) voltage scaling in addition to frequency scaling, and
100 * thus a cubic (instead of linear) reduction of energy. Also, we allow for
101 * _any_ cpufreq driver and not only the acpi-cpufreq driver.
102 */
103
104static unsigned int cpufreq_thermal_reduction_pctg[NR_CPUS];
105static unsigned int acpi_thermal_cpufreq_is_init = 0;
106
107
108static int cpu_has_cpufreq(unsigned int cpu)
109{
110 struct cpufreq_policy policy;
111 if (!acpi_thermal_cpufreq_is_init)
112 return -ENODEV;
113 if (!cpufreq_get_policy(&policy, cpu))
114 return -ENODEV;
115 return 0;
116}
117
118
119static int acpi_thermal_cpufreq_increase(unsigned int cpu)
120{
121 if (!cpu_has_cpufreq(cpu))
122 return -ENODEV;
123
124 if (cpufreq_thermal_reduction_pctg[cpu] < 60) {
125 cpufreq_thermal_reduction_pctg[cpu] += 20;
126 cpufreq_update_policy(cpu);
127 return 0;
128 }
129
130 return -ERANGE;
131}
132
133
134static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
135{
136 if (!cpu_has_cpufreq(cpu))
137 return -ENODEV;
138
139 if (cpufreq_thermal_reduction_pctg[cpu] >= 20) {
140 cpufreq_thermal_reduction_pctg[cpu] -= 20;
141 cpufreq_update_policy(cpu);
142 return 0;
143 }
144
145 return -ERANGE;
146}
147
148
149static int acpi_thermal_cpufreq_notifier(
150 struct notifier_block *nb,
151 unsigned long event,
152 void *data)
153{
154 struct cpufreq_policy *policy = data;
155 unsigned long max_freq = 0;
156
157 if (event != CPUFREQ_ADJUST)
158 goto out;
159
160 max_freq = (policy->cpuinfo.max_freq * (100 - cpufreq_thermal_reduction_pctg[policy->cpu])) / 100;
161
162 cpufreq_verify_within_limits(policy, 0, max_freq);
163
164 out:
165 return 0;
166}
167
168
169static struct notifier_block acpi_thermal_cpufreq_notifier_block = {
170 .notifier_call = acpi_thermal_cpufreq_notifier,
171};
172
173
174void acpi_thermal_cpufreq_init(void) {
175 int i;
176
177 for (i=0; i<NR_CPUS; i++)
178 cpufreq_thermal_reduction_pctg[i] = 0;
179
180 i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER);
181 if (!i)
182 acpi_thermal_cpufreq_is_init = 1;
183}
184
185void acpi_thermal_cpufreq_exit(void) {
186 if (acpi_thermal_cpufreq_is_init)
187 cpufreq_unregister_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER);
188
189 acpi_thermal_cpufreq_is_init = 0;
190}
191
192#else /* ! CONFIG_CPU_FREQ */
193
194static int acpi_thermal_cpufreq_increase(unsigned int cpu) { return -ENODEV; }
195static int acpi_thermal_cpufreq_decrease(unsigned int cpu) { return -ENODEV; }
196
197
198#endif
199
200
201int
202acpi_processor_set_thermal_limit (
203 acpi_handle handle,
204 int type)
205{
206 int result = 0;
207 struct acpi_processor *pr = NULL;
208 struct acpi_device *device = NULL;
209 int tx = 0;
210
211 ACPI_FUNCTION_TRACE("acpi_processor_set_thermal_limit");
212
213 if ((type < ACPI_PROCESSOR_LIMIT_NONE)
214 || (type > ACPI_PROCESSOR_LIMIT_DECREMENT))
215 return_VALUE(-EINVAL);
216
217 result = acpi_bus_get_device(handle, &device);
218 if (result)
219 return_VALUE(result);
220
221 pr = (struct acpi_processor *) acpi_driver_data(device);
222 if (!pr)
223 return_VALUE(-ENODEV);
224
225 /* Thermal limits are always relative to the current Px/Tx state. */
226 if (pr->flags.throttling)
227 pr->limit.thermal.tx = pr->throttling.state;
228
229 /*
230 * Our default policy is to only use throttling at the lowest
231 * performance state.
232 */
233
234 tx = pr->limit.thermal.tx;
235
236 switch (type) {
237
238 case ACPI_PROCESSOR_LIMIT_NONE:
239 do {
240 result = acpi_thermal_cpufreq_decrease(pr->id);
241 } while (!result);
242 tx = 0;
243 break;
244
245 case ACPI_PROCESSOR_LIMIT_INCREMENT:
246 /* if going up: P-states first, T-states later */
247
248 result = acpi_thermal_cpufreq_increase(pr->id);
249 if (!result)
250 goto end;
251 else if (result == -ERANGE)
252 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
253 "At maximum performance state\n"));
254
255 if (pr->flags.throttling) {
256 if (tx == (pr->throttling.state_count - 1))
257 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
258 "At maximum throttling state\n"));
259 else
260 tx++;
261 }
262 break;
263
264 case ACPI_PROCESSOR_LIMIT_DECREMENT:
265 /* if going down: T-states first, P-states later */
266
267 if (pr->flags.throttling) {
268 if (tx == 0)
269 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
270 "At minimum throttling state\n"));
271 else {
272 tx--;
273 goto end;
274 }
275 }
276
277 result = acpi_thermal_cpufreq_decrease(pr->id);
278 if (result == -ERANGE)
279 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
280 "At minimum performance state\n"));
281
282 break;
283 }
284
285end:
286 if (pr->flags.throttling) {
287 pr->limit.thermal.px = 0;
288 pr->limit.thermal.tx = tx;
289
290 result = acpi_processor_apply_limit(pr);
291 if (result)
292 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
293 "Unable to set thermal limit\n"));
294
295 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Thermal limit now (P%d:T%d)\n",
296 pr->limit.thermal.px,
297 pr->limit.thermal.tx));
298 } else
299 result = 0;
300
301 return_VALUE(result);
302}
303
304
305int
306acpi_processor_get_limit_info (
307 struct acpi_processor *pr)
308{
309 ACPI_FUNCTION_TRACE("acpi_processor_get_limit_info");
310
311 if (!pr)
312 return_VALUE(-EINVAL);
313
314 if (pr->flags.throttling)
315 pr->flags.limit = 1;
316
317 return_VALUE(0);
318}
319
320
321/* /proc interface */
322
323static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
324{
325 struct acpi_processor *pr = (struct acpi_processor *)seq->private;
326
327 ACPI_FUNCTION_TRACE("acpi_processor_limit_seq_show");
328
329 if (!pr)
330 goto end;
331
332 if (!pr->flags.limit) {
333 seq_puts(seq, "<not supported>\n");
334 goto end;
335 }
336
337 seq_printf(seq, "active limit: P%d:T%d\n"
338 "user limit: P%d:T%d\n"
339 "thermal limit: P%d:T%d\n",
340 pr->limit.state.px, pr->limit.state.tx,
341 pr->limit.user.px, pr->limit.user.tx,
342 pr->limit.thermal.px, pr->limit.thermal.tx);
343
344end:
345 return_VALUE(0);
346}
347
348static int acpi_processor_limit_open_fs(struct inode *inode, struct file *file)
349{
350 return single_open(file, acpi_processor_limit_seq_show,
351 PDE(inode)->data);
352}
353
354ssize_t acpi_processor_write_limit (
355 struct file *file,
356 const char __user *buffer,
357 size_t count,
358 loff_t *data)
359{
360 int result = 0;
361 struct seq_file *m = (struct seq_file *)file->private_data;
362 struct acpi_processor *pr = (struct acpi_processor *)m->private;
363 char limit_string[25] = {'\0'};
364 int px = 0;
365 int tx = 0;
366
367 ACPI_FUNCTION_TRACE("acpi_processor_write_limit");
368
369 if (!pr || (count > sizeof(limit_string) - 1)) {
370 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
371 return_VALUE(-EINVAL);
372 }
373
374 if (copy_from_user(limit_string, buffer, count)) {
375 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
376 return_VALUE(-EFAULT);
377 }
378
379 limit_string[count] = '\0';
380
381 if (sscanf(limit_string, "%d:%d", &px, &tx) != 2) {
382 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
383 return_VALUE(-EINVAL);
384 }
385
386 if (pr->flags.throttling) {
387 if ((tx < 0) || (tx > (pr->throttling.state_count - 1))) {
388 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid tx\n"));
389 return_VALUE(-EINVAL);
390 }
391 pr->limit.user.tx = tx;
392 }
393
394 result = acpi_processor_apply_limit(pr);
395
396 return_VALUE(count);
397}
398
399
400struct file_operations acpi_processor_limit_fops = {
401 .open = acpi_processor_limit_open_fs,
402 .read = seq_read,
403 .llseek = seq_lseek,
404 .release = single_release,
405};
406