blob: d22b32f4662d24502185bb830d686b54938a4b56 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "SCSI device support"
2
3config SCSI
4 tristate "SCSI device support"
5 ---help---
6 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
7 any other SCSI device under Linux, say Y and make sure that you know
8 the name of your SCSI host adapter (the card inside your computer
9 that "speaks" the SCSI protocol, also called SCSI controller),
10 because you will be asked for it.
11
12 You also need to say Y here if you have a device which speaks
13 the SCSI protocol. Examples of this include the parallel port
14 version of the IOMEGA ZIP drive, USB storage devices, Fibre
15 Channel, FireWire storage and the IDE-SCSI emulation driver.
16
17 To compile this driver as a module, choose M here and read
18 <file:Documentation/scsi/scsi.txt>.
19 The module will be called scsi_mod.
20
21 However, do not compile this as a module if your root file system
22 (the one containing the directory /) is located on a SCSI device.
23
24config SCSI_PROC_FS
25 bool "legacy /proc/scsi/ support"
26 depends on SCSI && PROC_FS
27 default y
28 ---help---
29 This option enables support for the various files in
30 /proc/scsi. In Linux 2.6 this has been superceeded by
31 files in sysfs but many legacy applications rely on this.
32
33 If unusure say Y.
34
35comment "SCSI support type (disk, tape, CD-ROM)"
36 depends on SCSI
37
38config BLK_DEV_SD
39 tristate "SCSI disk support"
40 depends on SCSI
41 ---help---
42 If you want to use SCSI hard disks, Fibre Channel disks,
43 USB storage or the SCSI or parallel port version of
44 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
45 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
46 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
47 CD-ROMs.
48
49 To compile this driver as a module, choose M here and read
50 <file:Documentation/scsi/scsi.txt>.
51 The module will be called sd_mod.
52
53 Do not compile this driver as a module if your root file system
54 (the one containing the directory /) is located on a SCSI disk.
55 In this case, do not compile the driver for your SCSI host adapter
56 (below) as a module either.
57
58config CHR_DEV_ST
59 tristate "SCSI tape support"
60 depends on SCSI
61 ---help---
62 If you want to use a SCSI tape drive under Linux, say Y and read the
63 SCSI-HOWTO, available from
64 <http://www.tldp.org/docs.html#howto>, and
65 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
66 for SCSI CD-ROMs.
67
68 To compile this driver as a module, choose M here and read
69 <file:Documentation/scsi/scsi.txt>. The module will be called st.
70
71config CHR_DEV_OSST
72 tristate "SCSI OnStream SC-x0 tape support"
73 depends on SCSI
74 ---help---
75 The OnStream SC-x0 SCSI tape drives can not be driven by the
76 standard st driver, but instead need this special osst driver and
77 use the /dev/osstX char device nodes (major 206). Via usb-storage
78 and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
79 as well. Note that there is also a second generation of OnStream
80 tape drives (ADR-x0) that supports the standard SCSI-2 commands for
81 tapes (QIC-157) and can be driven by the standard driver st.
82 For more information, you may have a look at the SCSI-HOWTO
83 <http://www.tldp.org/docs.html#howto> and
84 <file:Documentation/scsi/osst.txt> in the kernel source.
85 More info on the OnStream driver may be found on
86 <http://linux1.onstream.nl/test/>
87 Please also have a look at the standard st docu, as most of it
88 applies to osst as well.
89
90 To compile this driver as a module, choose M here and read
91 <file:Documentation/scsi/scsi.txt>. The module will be called osst.
92
93config BLK_DEV_SR
94 tristate "SCSI CDROM support"
95 depends on SCSI
96 ---help---
97 If you want to use a SCSI or FireWire CD-ROM under Linux,
98 say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
99 <http://www.tldp.org/docs.html#howto>. Also make sure to say
100 Y or M to "ISO 9660 CD-ROM file system support" later.
101
102 To compile this driver as a module, choose M here and read
103 <file:Documentation/scsi/scsi.txt>.
104 The module will be called sr_mod.
105
106config BLK_DEV_SR_VENDOR
107 bool "Enable vendor-specific extensions (for SCSI CDROM)"
108 depends on BLK_DEV_SR
109 help
110 This enables the usage of vendor specific SCSI commands. This is
111 required to support multisession CDs with old NEC/TOSHIBA cdrom
112 drives (and HP Writers). If you have such a drive and get the first
113 session only, try saying Y here; everybody else says N.
114
115config CHR_DEV_SG
116 tristate "SCSI generic support"
117 depends on SCSI
118 ---help---
119 If you want to use SCSI scanners, synthesizers or CD-writers or just
120 about anything having "SCSI" in its name other than hard disks,
121 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
122 directly, so you need some additional software which knows how to
123 talk to these devices using the SCSI protocol:
124
125 For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
126 writer software look at Cdrtools
127 (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
128 and for burning a "disk at once": CDRDAO
129 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
130 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
131 For other devices, it's possible that you'll have to write the
132 driver software yourself. Please read the file
133 <file:Documentation/scsi/scsi-generic.txt> for more information.
134
135 To compile this driver as a module, choose M here and read
136 <file:Documentation/scsi/scsi.txt>. The module will be called sg.
137
138 If unsure, say N.
139
140comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
141 depends on SCSI
142
143config SCSI_MULTI_LUN
144 bool "Probe all LUNs on each SCSI device"
145 depends on SCSI
146 help
147 If you have a SCSI device that supports more than one LUN (Logical
148 Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
149 can say Y here to force the SCSI driver to probe for multiple LUNs.
150 A SCSI device with multiple LUNs acts logically like multiple SCSI
151 devices. The vast majority of SCSI devices have only one LUN, and
152 so most people can say N here. The max_luns boot/module parameter
153 allows to override this setting.
154
155config SCSI_CONSTANTS
156 bool "Verbose SCSI error reporting (kernel size +=12K)"
157 depends on SCSI
158 help
159 The error messages regarding your SCSI hardware will be easier to
160 understand if you say Y here; it will enlarge your kernel by about
161 12 KB. If in doubt, say Y.
162
163config SCSI_LOGGING
164 bool "SCSI logging facility"
165 depends on SCSI
166 ---help---
167 This turns on a logging facility that can be used to debug a number
168 of SCSI related problems.
169
170 If you say Y here, no logging output will appear by default, but you
171 can enable logging by saying Y to "/proc file system support" and
172 "Sysctl support" below and executing the command
173
174 echo "scsi log token [level]" > /proc/scsi/scsi
175
176 at boot time after the /proc file system has been mounted.
177
178 There are a number of things that can be used for 'token' (you can
179 find them in the source: <file:drivers/scsi/scsi.c>), and this
180 allows you to select the types of information you want, and the
181 level allows you to select the level of verbosity.
182
183 If you say N here, it may be harder to track down some types of SCSI
184 problems. If you say Y here your kernel will be somewhat larger, but
185 there should be no noticeable performance impact as long as you have
186 logging turned off.
187
188menu "SCSI Transport Attributes"
189 depends on SCSI
190
191config SCSI_SPI_ATTRS
192 tristate "Parallel SCSI (SPI) Transport Attributes"
193 depends on SCSI
194 help
195 If you wish to export transport-specific information about
196 each attached SCSI device to sysfs, say Y. Otherwise, say N.
197
198config SCSI_FC_ATTRS
199 tristate "FiberChannel Transport Attributes"
200 depends on SCSI
201 help
202 If you wish to export transport-specific information about
203 each attached FiberChannel device to sysfs, say Y.
204 Otherwise, say N.
205
206config SCSI_ISCSI_ATTRS
207 tristate "iSCSI Transport Attributes"
208 depends on SCSI
209 help
210 If you wish to export transport-specific information about
211 each attached iSCSI device to sysfs, say Y.
212 Otherwise, say N.
213
214endmenu
215
216menu "SCSI low-level drivers"
217 depends on SCSI!=n
218
219config SGIWD93_SCSI
220 tristate "SGI WD93C93 SCSI Driver"
221 depends on SGI_IP22 && SCSI
222 help
223 If you have a Western Digital WD93 SCSI controller on
224 an SGI MIPS system, say Y. Otherwise, say N.
225
226config SCSI_DECNCR
227 tristate "DEC NCR53C94 Scsi Driver"
228 depends on MACH_DECSTATION && SCSI && TC
229 help
230 Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
231 based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
232
233config SCSI_DECSII
234 tristate "DEC SII Scsi Driver"
235 depends on MACH_DECSTATION && SCSI && MIPS32
236
237config BLK_DEV_3W_XXXX_RAID
238 tristate "3ware 5/6/7/8xxx ATA-RAID support"
239 depends on PCI && SCSI
240 help
241 3ware is the only hardware ATA-Raid product in Linux to date.
242 This card is 2,4, or 8 channel master mode support only.
243 SCSI support required!!!
244
245 <http://www.3ware.com/>
246
247 Please read the comments at the top of
248 <file:drivers/scsi/3w-xxxx.c>.
249
250config SCSI_3W_9XXX
251 tristate "3ware 9xxx SATA-RAID support"
252 depends on PCI && SCSI
253 help
254 This driver supports the 9000 series 3ware SATA-RAID cards.
255
256 <http://www.amcc.com>
257
258 Please read the comments at the top of
259 <file:drivers/scsi/3w-9xxx.c>.
260
261config SCSI_7000FASST
262 tristate "7000FASST SCSI support"
263 depends on ISA && SCSI
264 help
265 This driver supports the Western Digital 7000 SCSI host adapter
266 family. Some information is in the source:
267 <file:drivers/scsi/wd7000.c>.
268
269 To compile this driver as a module, choose M here: the
270 module will be called wd7000.
271
272config SCSI_ACARD
273 tristate "ACARD SCSI support"
274 depends on PCI && SCSI
275 help
276 This driver supports the ACARD SCSI host adapter.
277 Support Chip <ATP870 ATP876 ATP880 ATP885>
278 To compile this driver as a module, choose M here: the
279 module will be called atp870u.
280
281config SCSI_AHA152X
282 tristate "Adaptec AHA152X/2825 support"
283 depends on ISA && SCSI && !64BIT
284 ---help---
285 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
286 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
287 must be manually specified in this case.
288
289 It is explained in section 3.3 of the SCSI-HOWTO, available from
290 <http://www.tldp.org/docs.html#howto>. You might also want to
291 read the file <file:Documentation/scsi/aha152x.txt>.
292
293 To compile this driver as a module, choose M here: the
294 module will be called aha152x.
295
296config SCSI_AHA1542
297 tristate "Adaptec AHA1542 support"
298 depends on ISA && SCSI
299 ---help---
300 This is support for a SCSI host adapter. It is explained in section
301 3.4 of the SCSI-HOWTO, available from
302 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
303 purchased by Adaptec, and some former Trantor products are being
304 sold under the Adaptec name. If it doesn't work out of the box, you
305 may have to change some settings in <file:drivers/scsi/aha1542.h>.
306
307 To compile this driver as a module, choose M here: the
308 module will be called aha1542.
309
310config SCSI_AHA1740
311 tristate "Adaptec AHA1740 support"
312 depends on EISA && SCSI
313 ---help---
314 This is support for a SCSI host adapter. It is explained in section
315 3.5 of the SCSI-HOWTO, available from
316 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
317 of the box, you may have to change some settings in
318 <file:drivers/scsi/aha1740.h>.
319
320 To compile this driver as a module, choose M here: the
321 module will be called aha1740.
322
323config SCSI_AACRAID
324 tristate "Adaptec AACRAID support"
325 depends on SCSI && PCI
326
327source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
328
329config SCSI_AIC7XXX_OLD
330 tristate "Adaptec AIC7xxx support (old driver)"
331 depends on (ISA || EISA || PCI ) && SCSI
332 help
333 WARNING This driver is an older aic7xxx driver and is no longer
334 under active development. Adaptec, Inc. is writing a new driver to
335 take the place of this one, and it is recommended that whenever
336 possible, people should use the new Adaptec written driver instead
337 of this one. This driver will eventually be phased out entirely.
338
339 This is support for the various aic7xxx based Adaptec SCSI
340 controllers. These include the 274x EISA cards; 284x VLB cards;
341 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
342 motherboard based SCSI controllers from Adaptec. It does not support
343 the AAA-13x RAID controllers from Adaptec, nor will it likely ever
344 support them. It does not support the 2920 cards from Adaptec that
345 use the Future Domain SCSI controller chip. For those cards, you
346 need the "Future Domain 16xx SCSI support" driver.
347
348 In general, if the controller is based on an Adaptec SCSI controller
349 chip from the aic777x series or the aic78xx series, this driver
350 should work. The only exception is the 7810 which is specifically
351 not supported (that's the RAID controller chip on the AAA-13x
352 cards).
353
354 Note that the AHA2920 SCSI host adapter is *not* supported by this
355 driver; choose "Future Domain 16xx SCSI support" instead if you have
356 one of those.
357
358 Information on the configuration options for this controller can be
359 found by checking the help file for each of the available
360 configuration options. You should read
361 <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
362 contacting the maintainer with any questions. The SCSI-HOWTO,
363 available from <http://www.tldp.org/docs.html#howto>, can also
364 be of great help.
365
366 To compile this driver as a module, choose M here: the
367 module will be called aic7xxx_old.
368
369source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
370
371# All the I2O code and drivers do not seem to be 64bit safe.
372config SCSI_DPT_I2O
373 tristate "Adaptec I2O RAID support "
374 depends on !64BIT && SCSI && PCI
375 help
376 This driver supports all of Adaptec's I2O based RAID controllers as
377 well as the DPT SmartRaid V cards. This is an Adaptec maintained
378 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
379
380 To compile this driver as a module, choose M here: the
381 module will be called dpt_i2o.
382
383config SCSI_ADVANSYS
384 tristate "AdvanSys SCSI support"
385 depends on (ISA || EISA || PCI) && SCSI && BROKEN
386 help
387 This is a driver for all SCSI host adapters manufactured by
388 AdvanSys. It is documented in the kernel source in
389 <file:drivers/scsi/advansys.c>.
390
391 To compile this driver as a module, choose M here: the
392 module will be called advansys.
393
394config SCSI_IN2000
395 tristate "Always IN2000 SCSI support"
396 depends on ISA && SCSI
397 help
398 This is support for an ISA bus SCSI host adapter. You'll find more
399 information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
400 out of the box, you may have to change the jumpers for IRQ or
401 address selection.
402
403 To compile this driver as a module, choose M here: the
404 module will be called in2000.
405
406source "drivers/scsi/megaraid/Kconfig.megaraid"
407
408config SCSI_SATA
409 bool "Serial ATA (SATA) support"
410 depends on SCSI
411 help
412 This driver family supports Serial ATA host controllers
413 and devices.
414
415 If unsure, say N.
416
417config SCSI_SATA_AHCI
418 tristate "AHCI SATA support"
419 depends on SCSI_SATA && PCI
420 help
421 This option enables support for AHCI Serial ATA.
422
423 If unsure, say N.
424
425config SCSI_SATA_SVW
426 tristate "ServerWorks Frodo / Apple K2 SATA support"
427 depends on SCSI_SATA && PCI
428 help
429 This option enables support for Broadcom/Serverworks/Apple K2
430 SATA support.
431
432 If unsure, say N.
433
434config SCSI_ATA_PIIX
435 tristate "Intel PIIX/ICH SATA support"
436 depends on SCSI_SATA && PCI
437 help
438 This option enables support for ICH5 Serial ATA.
439 If PATA support was enabled previously, this enables
440 support for select Intel PIIX/ICH PATA host controllers.
441
442 If unsure, say N.
443
444config SCSI_SATA_NV
445 tristate "NVIDIA SATA support"
446 depends on SCSI_SATA && PCI && EXPERIMENTAL
447 help
448 This option enables support for NVIDIA Serial ATA.
449
450 If unsure, say N.
451
452config SCSI_SATA_PROMISE
453 tristate "Promise SATA TX2/TX4 support"
454 depends on SCSI_SATA && PCI
455 help
456 This option enables support for Promise Serial ATA TX2/TX4.
457
458 If unsure, say N.
459
460config SCSI_SATA_QSTOR
461 tristate "Pacific Digital SATA QStor support"
462 depends on SCSI_SATA && PCI
463 help
464 This option enables support for Pacific Digital Serial ATA QStor.
465
466 If unsure, say N.
467
468config SCSI_SATA_SX4
469 tristate "Promise SATA SX4 support"
470 depends on SCSI_SATA && PCI && EXPERIMENTAL
471 help
472 This option enables support for Promise Serial ATA SX4.
473
474 If unsure, say N.
475
476config SCSI_SATA_SIL
477 tristate "Silicon Image SATA support"
478 depends on SCSI_SATA && PCI && EXPERIMENTAL
479 help
480 This option enables support for Silicon Image Serial ATA.
481
482 If unsure, say N.
483
484config SCSI_SATA_SIS
485 tristate "SiS 964/180 SATA support"
486 depends on SCSI_SATA && PCI && EXPERIMENTAL
487 help
488 This option enables support for SiS Serial ATA 964/180.
489
490 If unsure, say N.
491
492config SCSI_SATA_ULI
493 tristate "ULi Electronics SATA support"
494 depends on SCSI_SATA && PCI && EXPERIMENTAL
495 help
496 This option enables support for ULi Electronics SATA.
497
498 If unsure, say N.
499
500config SCSI_SATA_VIA
501 tristate "VIA SATA support"
502 depends on SCSI_SATA && PCI
503 help
504 This option enables support for VIA Serial ATA.
505
506 If unsure, say N.
507
508config SCSI_SATA_VITESSE
509 tristate "VITESSE VSC-7174 SATA support"
510 depends on SCSI_SATA && PCI
511 help
512 This option enables support for Vitesse VSC7174 Serial ATA.
513
514 If unsure, say N.
515
516config SCSI_BUSLOGIC
517 tristate "BusLogic SCSI support"
518 depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
519 ---help---
520 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
521 Adapters. Consult the SCSI-HOWTO, available from
522 <http://www.tldp.org/docs.html#howto>, and the files
523 <file:Documentation/scsi/BusLogic.txt> and
524 <file:Documentation/scsi/FlashPoint.txt> for more information.
525
526 To compile this driver as a module, choose M here: the
527 module will be called BusLogic.
528
529config SCSI_OMIT_FLASHPOINT
530 bool "Omit FlashPoint support"
531 depends on SCSI_BUSLOGIC
532 help
533 This option allows you to omit the FlashPoint support from the
534 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
535 substantial, so users of MultiMaster Host Adapters may wish to omit
536 it.
537
538#
539# This is marked broken because it uses over 4kB of stack in
540# just two routines:
541# 2076 CpqTsProcessIMQEntry
542# 2052 PeekIMQEntry
543#
544config SCSI_CPQFCTS
545 tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
546 depends on PCI && SCSI && BROKEN
547 help
548 Say Y here to compile in support for the Compaq StorageWorks Fibre
549 Channel 64-bit/66Mhz Host Bus Adapter.
550
551config SCSI_DMX3191D
552 tristate "DMX3191D SCSI support"
553 depends on PCI && SCSI
554 help
555 This is support for Domex DMX3191D SCSI Host Adapters.
556
557 To compile this driver as a module, choose M here: the
558 module will be called dmx3191d.
559
560config SCSI_DTC3280
561 tristate "DTC3180/3280 SCSI support"
562 depends on ISA && SCSI
563 help
564 This is support for DTC 3180/3280 SCSI Host Adapters. Please read
565 the SCSI-HOWTO, available from
566 <http://www.tldp.org/docs.html#howto>, and the file
567 <file:Documentation/scsi/dtc3x80.txt>.
568
569 To compile this driver as a module, choose M here: the
570 module will be called dtc.
571
572config SCSI_EATA
573 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
574 depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
575 ---help---
576 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
577 ISA and all EISA I/O addresses are probed looking for the "EATA"
578 signature. The addresses of all the PCI SCSI controllers reported
579 by the PCI subsystem are probed as well.
580
581 You want to read the start of <file:drivers/scsi/eata.c> and the
582 SCSI-HOWTO, available from
583 <http://www.tldp.org/docs.html#howto>.
584
585 To compile this driver as a module, choose M here: the
586 module will be called eata.
587
588config SCSI_EATA_TAGGED_QUEUE
589 bool "enable tagged command queueing"
590 depends on SCSI_EATA
591 help
592 This is a feature of SCSI-2 which improves performance: the host
593 adapter can send several SCSI commands to a device's queue even if
594 previous commands haven't finished yet.
595 This is equivalent to the "eata=tc:y" boot option.
596
597config SCSI_EATA_LINKED_COMMANDS
598 bool "enable elevator sorting"
599 depends on SCSI_EATA
600 help
601 This option enables elevator sorting for all probed SCSI disks and
602 CD-ROMs. It definitely reduces the average seek distance when doing
603 random seeks, but this does not necessarily result in a noticeable
604 performance improvement: your mileage may vary...
605 This is equivalent to the "eata=lc:y" boot option.
606
607config SCSI_EATA_MAX_TAGS
608 int "maximum number of queued commands"
609 depends on SCSI_EATA
610 default "16"
611 help
612 This specifies how many SCSI commands can be maximally queued for
613 each probed SCSI device. You should reduce the default value of 16
614 only if you have disks with buggy or limited tagged command support.
615 Minimum is 2 and maximum is 62. This value is also the window size
616 used by the elevator sorting option above. The effective value used
617 by the driver for each probed SCSI device is reported at boot time.
618 This is equivalent to the "eata=mq:8" boot option.
619
620config SCSI_EATA_PIO
621 tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
622 depends on (ISA || EISA || PCI) && SCSI && BROKEN
623 ---help---
624 This driver supports all EATA-PIO protocol compliant SCSI Host
625 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
626 host adapters could also use this driver but are discouraged from
627 doing so, since this driver only supports hard disks and lacks
628 numerous features. You might want to have a look at the SCSI-HOWTO,
629 available from <http://www.tldp.org/docs.html#howto>.
630
631 To compile this driver as a module, choose M here: the
632 module will be called eata_pio.
633
634config SCSI_FUTURE_DOMAIN
635 tristate "Future Domain 16xx SCSI/AHA-2920A support"
636 depends on (ISA || PCI) && SCSI
637 ---help---
638 This is support for Future Domain's 16-bit SCSI host adapters
639 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
640 other adapters based on the Future Domain chipsets (Quantum
641 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
642 It is explained in section 3.7 of the SCSI-HOWTO, available from
643 <http://www.tldp.org/docs.html#howto>.
644
645 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
646 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
647 controller support"). This Future Domain driver works with the older
648 Adaptec AHA-2920A boards with a Future Domain chip on them.
649
650 To compile this driver as a module, choose M here: the
651 module will be called fdomain.
652
653config SCSI_FD_MCS
654 tristate "Future Domain MCS-600/700 SCSI support"
655 depends on MCA_LEGACY && SCSI
656 ---help---
657 This is support for Future Domain MCS 600/700 MCA SCSI adapters.
658 Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
659 is identical to the MCS 700 and hence also supported by this driver.
660 This driver also supports the Reply SB16/SCSI card (the SCSI part).
661 It supports multiple adapters in the same system.
662
663 To compile this driver as a module, choose M here: the
664 module will be called fd_mcs.
665
666config SCSI_GDTH
667 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
668 depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
669 ---help---
670 Formerly called GDT SCSI Disk Array Controller Support.
671
672 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
673 manufactured by Intel Corporation/ICP vortex GmbH. It is documented
674 in the kernel source in <file:drivers/scsi/gdth.c> and
675 <file:drivers/scsi/gdth.h.>
676
677 To compile this driver as a module, choose M here: the
678 module will be called gdth.
679
680config SCSI_GENERIC_NCR5380
681 tristate "Generic NCR5380/53c400 SCSI PIO support"
682 depends on ISA && SCSI
683 ---help---
684 This is a driver for the old NCR 53c80 series of SCSI controllers
685 on boards using PIO. Most boards such as the Trantor T130 fit this
686 category, along with a large number of ISA 8bit controllers shipped
687 for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
688 you should select the specific driver for that card rather than
689 generic 5380 support.
690
691 It is explained in section 3.8 of the SCSI-HOWTO, available from
692 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
693 of the box, you may have to change some settings in
694 <file:drivers/scsi/g_NCR5380.h>.
695
696 To compile this driver as a module, choose M here: the
697 module will be called g_NCR5380.
698
699config SCSI_GENERIC_NCR5380_MMIO
700 tristate "Generic NCR5380/53c400 SCSI MMIO support"
701 depends on ISA && SCSI
702 ---help---
703 This is a driver for the old NCR 53c80 series of SCSI controllers
704 on boards using memory mapped I/O.
705 It is explained in section 3.8 of the SCSI-HOWTO, available from
706 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
707 of the box, you may have to change some settings in
708 <file:drivers/scsi/g_NCR5380.h>.
709
710 To compile this driver as a module, choose M here: the
711 module will be called g_NCR5380_mmio.
712
713config SCSI_GENERIC_NCR53C400
714 bool "Enable NCR53c400 extensions"
715 depends on SCSI_GENERIC_NCR5380
716 help
717 This enables certain optimizations for the NCR53c400 SCSI cards.
718 You might as well try it out. Note that this driver will only probe
719 for the Trantor T130B in its default configuration; you might have
720 to pass a command line option to the kernel at boot time if it does
721 not detect your card. See the file
722 <file:Documentation/scsi/g_NCR5380.txt> for details.
723
724config SCSI_IBMMCA
725 tristate "IBMMCA SCSI support"
726 depends on MCA_LEGACY && SCSI
727 ---help---
728 This is support for the IBM SCSI adapter found in many of the PS/2
729 series computers. These machines have an MCA bus, so you need to
730 answer Y to "MCA support" as well and read
731 <file:Documentation/mca.txt>.
732
733 If the adapter isn't found during boot (a common problem for models
734 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
735 option, where <pun> is the id of the SCSI subsystem (usually 7, but
736 if that doesn't work check your reference diskette). Owners of
737 model 95 with a LED-matrix-display can in addition activate some
738 activity info like under OS/2, but more informative, by setting
739 'ibmmcascsi=display' as an additional kernel parameter. Try "man
740 bootparam" or see the documentation of your boot loader about how to
741 pass options to the kernel.
742
743 To compile this driver as a module, choose M here: the
744 module will be called ibmmca.
745
746config IBMMCA_SCSI_ORDER_STANDARD
747 bool "Standard SCSI-order"
748 depends on SCSI_IBMMCA
749 ---help---
750 In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
751 are assigned to the drive letters, starting with the lowest SCSI-id
752 (physical number -- pun) to be drive C:, as seen from DOS and
753 similar operating systems. When looking into papers describing the
754 ANSI-SCSI-standard, this assignment of drives appears to be wrong.
755 The SCSI-standard follows a hardware-hierarchy which says that id 7
756 has the highest priority and id 0 the lowest. Therefore, the host
757 adapters are still today everywhere placed as SCSI-id 7 by default.
758 In the SCSI-standard, the drive letters express the priority of the
759 disk. C: should be the hard disk, or a partition on it, with the
760 highest priority. This must therefore be the disk with the highest
761 SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
762 original definition of the SCSI-standard as also industrial- and
763 process-control-machines, like VME-CPUs running under realtime-OSes
764 (e.g. LynxOS, OS9) do.
765
766 If you like to run Linux on your MCA-machine with the same
767 assignment of hard disks as seen from e.g. DOS or OS/2 on your
768 machine, which is in addition conformant to the SCSI-standard, you
769 must say Y here. This is also necessary for MCA-Linux users who want
770 to keep downward compatibility to older releases of the
771 IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
772 June 1997).
773
774 If you like to have the lowest SCSI-id assigned as drive C:, as
775 modern SCSI-BIOSes do, which does not conform to the standard, but
776 is widespread and common in the PC-world of today, you must say N
777 here. If unsure, say Y.
778
779config IBMMCA_SCSI_DEV_RESET
780 bool "Reset SCSI-devices at boottime"
781 depends on SCSI_IBMMCA
782 ---help---
783 By default, SCSI-devices are reset when the machine is powered on.
784 However, some devices exist, like special-control-devices,
785 SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
786 not reset when switched on. If you say Y here, each device connected
787 to your SCSI-bus will be issued a reset-command after it has been
788 probed, while the kernel is booting. This may cause problems with
789 more modern devices, like hard disks, which do not appreciate these
790 reset commands, and can cause your system to hang. So say Y only if
791 you know that one of your older devices needs it; N is the safe
792 answer.
793
794config SCSI_IPS
795 tristate "IBM ServeRAID support"
796 depends on PCI && SCSI
797 ---help---
798 This is support for the IBM ServeRAID hardware RAID controllers.
799 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
800 for more information. If this driver does not work correctly
801 without modification please contact the author by email at
802 <ipslinux@adaptec.com>.
803
804 To compile this driver as a module, choose M here: the
805 module will be called ips.
806
807config SCSI_IBMVSCSI
808 tristate "IBM Virtual SCSI support"
809 depends on PPC_PSERIES || PPC_ISERIES
810 help
811 This is the IBM POWER Virtual SCSI Client
812
813 To compile this driver as a module, choose M here: the
814 module will be called ibmvscsic.
815
816config SCSI_INITIO
817 tristate "Initio 9100U(W) support"
818 depends on PCI && SCSI
819 help
820 This is support for the Initio 91XXU(W) SCSI host adapter. Please
821 read the SCSI-HOWTO, available from
822 <http://www.tldp.org/docs.html#howto>.
823
824 To compile this driver as a module, choose M here: the
825 module will be called initio.
826
827config SCSI_INIA100
828 tristate "Initio INI-A100U2W support"
829 depends on PCI && SCSI
830 help
831 This is support for the Initio INI-A100U2W SCSI host adapter.
832 Please read the SCSI-HOWTO, available from
833 <http://www.tldp.org/docs.html#howto>.
834
835 To compile this driver as a module, choose M here: the
836 module will be called a100u2w.
837
838config SCSI_PPA
839 tristate "IOMEGA parallel port (ppa - older drives)"
840 depends on SCSI && PARPORT
841 ---help---
842 This driver supports older versions of IOMEGA's parallel port ZIP
843 drive (a 100 MB removable media device).
844
845 Note that you can say N here if you have the SCSI version of the ZIP
846 drive: it will be supported automatically if you said Y to the
847 generic "SCSI disk support", above.
848
849 If you have the ZIP Plus drive or a more recent parallel port ZIP
850 drive (if the supplied cable with the drive is labeled "AutoDetect")
851 then you should say N here and Y to "IOMEGA parallel port (imm -
852 newer drives)", below.
853
854 For more information about this driver and how to use it you should
855 read the file <file:Documentation/scsi/ppa.txt>. You should also read
856 the SCSI-HOWTO, which is available from
857 <http://www.tldp.org/docs.html#howto>. If you use this driver,
858 you will still be able to use the parallel port for other tasks,
859 such as a printer; it is safe to compile both drivers into the
860 kernel.
861
862 To compile this driver as a module, choose M here: the
863 module will be called ppa.
864
865config SCSI_IMM
866 tristate "IOMEGA parallel port (imm - newer drives)"
867 depends on SCSI && PARPORT
868 ---help---
869 This driver supports newer versions of IOMEGA's parallel port ZIP
870 drive (a 100 MB removable media device).
871
872 Note that you can say N here if you have the SCSI version of the ZIP
873 drive: it will be supported automatically if you said Y to the
874 generic "SCSI disk support", above.
875
876 If you have the ZIP Plus drive or a more recent parallel port ZIP
877 drive (if the supplied cable with the drive is labeled "AutoDetect")
878 then you should say Y here; if you have an older ZIP drive, say N
879 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
880
881 For more information about this driver and how to use it you should
882 read the file <file:Documentation/scsi/ppa.txt>. You should also read
883 the SCSI-HOWTO, which is available from
884 <http://www.tldp.org/docs.html#howto>. If you use this driver,
885 you will still be able to use the parallel port for other tasks,
886 such as a printer; it is safe to compile both drivers into the
887 kernel.
888
889 To compile this driver as a module, choose M here: the
890 module will be called imm.
891
892config SCSI_IZIP_EPP16
893 bool "ppa/imm option - Use slow (but safe) EPP-16"
894 depends on PARPORT && (SCSI_PPA || SCSI_IMM)
895 ---help---
896 EPP (Enhanced Parallel Port) is a standard for parallel ports which
897 allows them to act as expansion buses that can handle up to 64
898 peripheral devices.
899
900 Some parallel port chipsets are slower than their motherboard, and
901 so we have to control the state of the chipset's FIFO queue every
902 now and then to avoid data loss. This will be done if you say Y
903 here.
904
905 Generally, saying Y is the safe option and slows things down a bit.
906
907config SCSI_IZIP_SLOW_CTR
908 bool "ppa/imm option - Assume slow parport control register"
909 depends on PARPORT && (SCSI_PPA || SCSI_IMM)
910 help
911 Some parallel ports are known to have excessive delays between
912 changing the parallel port control register and good data being
913 available on the parallel port data/status register. This option
914 forces a small delay (1.0 usec to be exact) after changing the
915 control register to let things settle out. Enabling this option may
916 result in a big drop in performance but some very old parallel ports
917 (found in 386 vintage machines) will not work properly.
918
919 Generally, saying N is fine.
920
921config SCSI_NCR53C406A
922 tristate "NCR53c406a SCSI support"
923 depends on ISA && SCSI
924 help
925 This is support for the NCR53c406a SCSI host adapter. For user
926 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
927 in the kernel source. Also read the SCSI-HOWTO, available from
928 <http://www.tldp.org/docs.html#howto>.
929
930 To compile this driver as a module, choose M here: the
931 module will be called NCR53c406.
932
933config SCSI_NCR_D700
934 tristate "NCR Dual 700 MCA SCSI support"
935 depends on MCA && SCSI
936 select SCSI_SPI_ATTRS
937 help
938 This is a driver for the MicroChannel Dual 700 card produced by
939 NCR and commonly used in 345x/35xx/4100 class machines. It always
940 tries to negotiate sync and uses tag command queueing.
941
942 Unless you have an NCR manufactured machine, the chances are that
943 you do not have this SCSI card, so say N.
944
945config 53C700_IO_MAPPED
946 bool
947 depends on SCSI_NCR_D700
948 default y
949
950config SCSI_LASI700
951 tristate "HP Lasi SCSI support for 53c700/710"
952 depends on GSC && SCSI
953 select SCSI_SPI_ATTRS
954 help
955 This is a driver for the SCSI controller in the Lasi chip found in
956 many PA-RISC workstations & servers. If you do not know whether you
957 have a Lasi chip, it is safe to say "Y" here.
958
959config 53C700_MEM_MAPPED
960 bool
961 depends on SCSI_LASI700
962 default y
963
964config 53C700_LE_ON_BE
965 bool
966 depends on SCSI_LASI700
967 default y
968
969config SCSI_SYM53C8XX_2
970 tristate "SYM53C8XX Version 2 SCSI support"
971 depends on PCI && SCSI
972 select SCSI_SPI_ATTRS
973 ---help---
974 This driver supports the whole NCR53C8XX/SYM53C8XX family of
975 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
976 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
977 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
978 controllers; you need to use the Fusion MPT driver for that.
979
980 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
981 information.
982
983config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
984 int "DMA addressing mode"
985 depends on SCSI_SYM53C8XX_2
986 default "1"
987 ---help---
988 This option only applies to PCI-SCSI chips that are PCI DAC
989 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
990
991 When set to 0, the driver will program the chip to only perform
992 32-bit DMA. When set to 1, the chip will be able to perform DMA
993 to addresses up to 1TB. When set to 2, the driver supports the
994 full 64-bit DMA address range, but can only address 16 segments
995 of 4 GB each. This limits the total addressable range to 64 GB.
996
997 Most machines with less than 4GB of memory should use a setting
998 of 0 for best performance. If your machine has 4GB of memory
999 or more, you should set this option to 1 (the default).
1000
1001 The still experimental value 2 (64 bit DMA addressing with 16
1002 x 4GB segments limitation) can be used on systems that require
1003 PCI address bits past bit 39 to be set for the addressing of
1004 memory using PCI DAC cycles.
1005
1006config SCSI_SYM53C8XX_DEFAULT_TAGS
1007 int "default tagged command queue depth"
1008 depends on SCSI_SYM53C8XX_2
1009 default "16"
1010 help
1011 This is the default value of the command queue depth the
1012 driver will announce to the generic SCSI layer for devices
1013 that support tagged command queueing. This value can be changed
1014 from the boot command line. This is a soft limit that cannot
1015 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
1016
1017config SCSI_SYM53C8XX_MAX_TAGS
1018 int "maximum number of queued commands"
1019 depends on SCSI_SYM53C8XX_2
1020 default "64"
1021 help
1022 This option allows you to specify the maximum number of commands
1023 that can be queued to any device, when tagged command queuing is
1024 possible. The driver supports up to 256 queued commands per device.
1025 This value is used as a compiled-in hard limit.
1026
1027config SCSI_SYM53C8XX_IOMAPPED
1028 bool "use port IO"
1029 depends on SCSI_SYM53C8XX_2
1030 help
1031 If you say Y here, the driver will use port IO to access
1032 the card. This is significantly slower then using memory
1033 mapped IO. Most people should answer N.
1034
1035config SCSI_IPR
1036 tristate "IBM Power Linux RAID adapter support"
1037 depends on PCI && SCSI
1038 select FW_LOADER
1039 ---help---
1040 This driver supports the IBM Power Linux family RAID adapters.
1041 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
1042 as IBM iSeries 5702, 5703, 5709, and 570A.
1043
1044config SCSI_IPR_TRACE
1045 bool "enable driver internal trace"
1046 depends on SCSI_IPR
1047 help
1048 If you say Y here, the driver will trace all commands issued
1049 to the adapter. Performance impact is minimal. Trace can be
1050 dumped using /sys/bus/class/scsi_host/hostXX/trace.
1051
1052config SCSI_IPR_DUMP
1053 bool "enable adapter dump support"
1054 depends on SCSI_IPR
1055 help
1056 If you say Y here, the driver will support adapter crash dump.
1057 If you enable this support, the iprdump daemon can be used
1058 to capture adapter failure analysis information.
1059
1060config SCSI_ZALON
1061 tristate "Zalon SCSI support"
1062 depends on GSC && SCSI
1063 select SCSI_SPI_ATTRS
1064 help
1065 The Zalon is a GSC/HSC bus interface chip that sits between the
1066 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1067 C110, J200, J210 and some D, K & R-class machines. It's also
1068 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1069 Say Y here if you have one of these machines or cards.
1070
1071config SCSI_NCR_Q720
1072 tristate "NCR Quad 720 MCA SCSI support"
1073 depends on MCA && SCSI
1074 select SCSI_SPI_ATTRS
1075 help
1076 This is a driver for the MicroChannel Quad 720 card produced by
1077 NCR and commonly used in 345x/35xx/4100 class machines. It always
1078 tries to negotiate sync and uses tag command queueing.
1079
1080 Unless you have an NCR manufactured machine, the chances are that
1081 you do not have this SCSI card, so say N.
1082
1083config SCSI_NCR53C8XX_DEFAULT_TAGS
1084 int " default tagged command queue depth"
1085 depends on SCSI_ZALON || SCSI_NCR_Q720
1086 default "8"
1087 ---help---
1088 "Tagged command queuing" is a feature of SCSI-2 which improves
1089 performance: the host adapter can send several SCSI commands to a
1090 device's queue even if previous commands haven't finished yet.
1091 Because the device is intelligent, it can optimize its operations
1092 (like head positioning) based on its own request queue. Some SCSI
1093 devices don't implement this properly; if you want to disable this
1094 feature, enter 0 or 1 here (it doesn't matter which).
1095
1096 The default value is 8 and should be supported by most hard disks.
1097 This value can be overridden from the boot command line using the
1098 'tags' option as follows (example):
1099 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1100 4, set queue depth to 16 for target 2 and target 3 on controller 0
1101 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1102
1103 The normal answer therefore is to go with the default 8 and to use
1104 a boot command line option for devices that need to use a different
1105 command queue depth.
1106
1107 There is no safe option other than using good SCSI devices.
1108
1109config SCSI_NCR53C8XX_MAX_TAGS
1110 int " maximum number of queued commands"
1111 depends on SCSI_ZALON || SCSI_NCR_Q720
1112 default "32"
1113 ---help---
1114 This option allows you to specify the maximum number of commands
1115 that can be queued to any device, when tagged command queuing is
1116 possible. The default value is 32. Minimum is 2, maximum is 64.
1117 Modern hard disks are able to support 64 tags and even more, but
1118 do not seem to be faster when more than 32 tags are being used.
1119
1120 So, the normal answer here is to go with the default value 32 unless
1121 you are using very large hard disks with large cache (>= 1 MB) that
1122 are able to take advantage of more than 32 tagged commands.
1123
1124 There is no safe option and the default answer is recommended.
1125
1126config SCSI_NCR53C8XX_SYNC
1127 int " synchronous transfers frequency in MHz"
1128 depends on SCSI_ZALON || SCSI_NCR_Q720
1129 default "20"
1130 ---help---
1131 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1132 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1133 are respectively the maximum data transfer rates in mega-transfers
1134 per second for each class. For example, a FAST-20 Wide 16 device is
1135 able to transfer data at 20 million 16 bit packets per second for a
1136 total rate of 40 MB/s.
1137
1138 You may specify 0 if you want to only use asynchronous data
1139 transfers. This is the safest and slowest option. Otherwise, specify
1140 a value between 5 and 80, depending on the capability of your SCSI
1141 controller. The higher the number, the faster the data transfer.
1142 Note that 80 should normally be ok since the driver decreases the
1143 value automatically according to the controller's capabilities.
1144
1145 Your answer to this question is ignored for controllers with NVRAM,
1146 since the driver will get this information from the user set-up. It
1147 also can be overridden using a boot setup option, as follows
1148 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1149 for FAST-20 synchronous data transfer (20 mega-transfers per
1150 second).
1151
1152 The normal answer therefore is not to go with the default but to
1153 select the maximum value 80 allowing the driver to use the maximum
1154 value supported by each controller. If this causes problems with
1155 your SCSI devices, you should come back and decrease the value.
1156
1157 There is no safe option other than using good cabling, right
1158 terminations and SCSI conformant devices.
1159
1160config SCSI_NCR53C8XX_PROFILE
1161 bool " enable profiling"
1162 depends on SCSI_ZALON || SCSI_NCR_Q720
1163 help
1164 This option allows you to enable profiling information gathering.
1165 These statistics are not very accurate due to the low frequency
1166 of the kernel clock (100 Hz on i386) and have performance impact
1167 on systems that use very fast devices.
1168
1169 The normal answer therefore is N.
1170
1171config SCSI_NCR53C8XX_NO_DISCONNECT
1172 bool " not allow targets to disconnect"
1173 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1174 help
1175 This option is only provided for safety if you suspect some SCSI
1176 device of yours to not support properly the target-disconnect
1177 feature. In that case, you would say Y here. In general however, to
1178 not allow targets to disconnect is not reasonable if there is more
1179 than 1 device on a SCSI bus. The normal answer therefore is N.
1180
1181config SCSI_MCA_53C9X
1182 tristate "NCR MCA 53C9x SCSI support"
1183 depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
1184 help
1185 Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
1186 controller based on the NCR 53C94. This driver will allow use of
1187 the controller on the 3550, and very possibly others.
1188
1189 To compile this driver as a module, choose M here: the
1190 module will be called mca_53c9x.
1191
1192config SCSI_PAS16
1193 tristate "PAS16 SCSI support"
1194 depends on ISA && SCSI
1195 ---help---
1196 This is support for a SCSI host adapter. It is explained in section
1197 3.10 of the SCSI-HOWTO, available from
1198 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1199 of the box, you may have to change some settings in
1200 <file:drivers/scsi/pas16.h>.
1201
1202 To compile this driver as a module, choose M here: the
1203 module will be called pas16.
1204
1205config SCSI_PCI2000
1206 tristate "PCI2000 support"
1207 depends on PCI && SCSI && BROKEN
1208 help
1209 This is support for the PCI2000I EIDE interface card which acts as a
1210 SCSI host adapter. Please read the SCSI-HOWTO, available from
1211 <http://www.tldp.org/docs.html#howto>.
1212
1213 To compile this driver as a module, choose M here: the
1214 module will be called pci2000.
1215
1216config SCSI_PCI2220I
1217 tristate "PCI2220i support"
1218 depends on PCI && SCSI && BROKEN
1219 help
1220 This is support for the PCI2220i EIDE interface card which acts as a
1221 SCSI host adapter. Please read the SCSI-HOWTO, available from
1222 <http://www.tldp.org/docs.html#howto>.
1223
1224 To compile this driver as a module, choose M here: the
1225 module will be called pci2220i.
1226
1227config SCSI_PSI240I
1228 tristate "PSI240i support"
1229 depends on ISA && SCSI
1230 help
1231 This is support for the PSI240i EIDE interface card which acts as a
1232 SCSI host adapter. Please read the SCSI-HOWTO, available from
1233 <http://www.tldp.org/docs.html#howto>.
1234
1235 To compile this driver as a module, choose M here: the
1236 module will be called psi240i.
1237
1238config SCSI_QLOGIC_FAS
1239 tristate "Qlogic FAS SCSI support"
1240 depends on ISA && SCSI
1241 ---help---
1242 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1243 FastSCSI! cards as well as any other card based on the FASXX chip
1244 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1245
1246 This driver does NOT support the PCI versions of these cards. The
1247 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1248 SCSI support"), below.
1249
1250 Information about this driver is contained in
1251 <file:Documentation/scsi/qlogicfas.txt>. You should also read the
1252 SCSI-HOWTO, available from
1253 <http://www.tldp.org/docs.html#howto>.
1254
1255 To compile this driver as a module, choose M here: the
1256 module will be called qlogicfas.
1257
1258config SCSI_QLOGIC_ISP
1259 tristate "Qlogic ISP SCSI support (old driver)"
1260 depends on PCI && SCSI && BROKEN
1261 ---help---
1262 This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
1263 IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter
1264 card is supported by the "AM53/79C974 PCI SCSI" driver.)
1265
1266 If you say Y here, make sure to choose "BIOS" at the question "PCI
1267 access mode".
1268
1269 Please read the file <file:Documentation/scsi/qlogicisp.txt>. You
1270 should also read the SCSI-HOWTO, available from
1271 <http://www.tldp.org/docs.html#howto>.
1272
1273 To compile this driver as a module, choose M here: the
1274 module will be called qlogicisp.
1275
1276 These days the hardware is also supported by the more modern qla1280
1277 driver. In doubt use that one instead of qlogicisp.
1278
1279config SCSI_QLOGIC_FC
1280 tristate "Qlogic ISP FC SCSI support"
1281 depends on PCI && SCSI
1282 help
1283 This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
1284
1285 To compile this driver as a module, choose M here: the
1286 module will be called qlogicfc.
1287
1288config SCSI_QLOGIC_FC_FIRMWARE
1289 bool "Include loadable firmware in driver"
1290 depends on SCSI_QLOGIC_FC
1291 help
1292 Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
1293 expanded LUN addressing and FcTape (FCP-2) support, in the
1294 qlogicfc driver. This is required on some platforms.
1295
1296config SCSI_QLOGIC_1280
1297 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1298 depends on PCI && SCSI
1299 help
1300 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1301
1302 To compile this driver as a module, choose M here: the
1303 module will be called qla1280.
1304
1305config SCSI_QLOGIC_1280_1040
1306 bool "Qlogic QLA 1020/1040 SCSI support"
1307 depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
1308 help
1309 Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
1310 do not want to use the old driver. This option enables support in
1311 the qla1280 driver for those host adapters.
1312
1313config SCSI_QLOGICPTI
1314 tristate "PTI Qlogic, ISP Driver"
1315 depends on SBUS && SCSI
1316 help
1317 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1318 controllers are known under Solaris as qpti and in the openprom as
1319 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1320 driven by a different driver.
1321
1322 To compile this driver as a module, choose M here: the
1323 module will be called qlogicpti.
1324
1325source "drivers/scsi/qla2xxx/Kconfig"
1326
1327config SCSI_SEAGATE
1328 tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
1329 depends on X86 && ISA && SCSI && BROKEN
1330 ---help---
1331 These are 8-bit SCSI controllers; the ST-01 is also supported by
1332 this driver. It is explained in section 3.9 of the SCSI-HOWTO,
1333 available from <http://www.tldp.org/docs.html#howto>. If it
1334 doesn't work out of the box, you may have to change some settings in
1335 <file:drivers/scsi/seagate.h>.
1336
1337 To compile this driver as a module, choose M here: the
1338 module will be called seagate.
1339
1340# definitely looks not 64bit safe:
1341config SCSI_SIM710
1342 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1343 depends on (EISA || MCA) && SCSI
1344 select SCSI_SPI_ATTRS
1345 ---help---
1346 This driver for NCR53c710 based SCSI host adapters.
1347
1348 It currently supports Compaq EISA cards and NCR MCA cards
1349
1350config 53C700_IO_MAPPED
1351 bool
1352 depends on SCSI_SIM710
1353 default y
1354
1355config SCSI_SYM53C416
1356 tristate "Symbios 53c416 SCSI support"
1357 depends on ISA && SCSI
1358 ---help---
1359 This is support for the sym53c416 SCSI host adapter, the SCSI
1360 adapter that comes with some HP scanners. This driver requires that
1361 the sym53c416 is configured first using some sort of PnP
1362 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
1363 are using isapnp then you need to compile this driver as a module
1364 and then load it using insmod after isapnp has run. The parameters
1365 of the configured card(s) should be passed to the driver. The format
1366 is:
1367
1368 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
1369
1370 To compile this driver as a module, choose M here: the
1371 module will be called sym53c416.
1372
1373config SCSI_DC395x
1374 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
1375 depends on PCI && SCSI && EXPERIMENTAL
1376 ---help---
1377 This driver supports PCI SCSI host adapters based on the ASIC
1378 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1379
1380 This driver works, but is still in experimental status. So better
1381 have a bootable disk and a backup in case of emergency.
1382
1383 Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
1384
1385 To compile this driver as a module, choose M here: the
1386 module will be called dc395x.
1387
1388config SCSI_DC390T
1389 tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
1390 depends on PCI && SCSI
1391 ---help---
1392 This driver supports PCI SCSI host adapters based on the Am53C974A
1393 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1394 PCscsi/PCnet (Am53/79C974) solutions.
1395
1396 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
1397
1398 Note that this driver does NOT support Tekram DC390W/U/F, which are
1399 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1400
1401 To compile this driver as a module, choose M here: the
1402 module will be called tmscsim.
1403
1404config SCSI_T128
1405 tristate "Trantor T128/T128F/T228 SCSI support"
1406 depends on ISA && SCSI
1407 ---help---
1408 This is support for a SCSI host adapter. It is explained in section
1409 3.11 of the SCSI-HOWTO, available from
1410 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1411 of the box, you may have to change some settings in
1412 <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
1413 Adaptec, and some former Trantor products are being sold under the
1414 Adaptec name.
1415
1416 To compile this driver as a module, choose M here: the
1417 module will be called t128.
1418
1419config SCSI_U14_34F
1420 tristate "UltraStor 14F/34F support"
1421 depends on ISA && SCSI
1422 ---help---
1423 This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
1424 The source at <file:drivers/scsi/u14-34f.c> contains some
1425 information about this hardware. If the driver doesn't work out of
1426 the box, you may have to change some settings in
1427 <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
1428 <http://www.tldp.org/docs.html#howto>. Note that there is also
1429 another driver for the same hardware: "UltraStor SCSI support",
1430 below. You should say Y to both only if you want 24F support as
1431 well.
1432
1433 To compile this driver as a module, choose M here: the
1434 module will be called u14-34f.
1435
1436config SCSI_U14_34F_TAGGED_QUEUE
1437 bool "enable tagged command queueing"
1438 depends on SCSI_U14_34F
1439 help
1440 This is a feature of SCSI-2 which improves performance: the host
1441 adapter can send several SCSI commands to a device's queue even if
1442 previous commands haven't finished yet.
1443 This is equivalent to the "u14-34f=tc:y" boot option.
1444
1445config SCSI_U14_34F_LINKED_COMMANDS
1446 bool "enable elevator sorting"
1447 depends on SCSI_U14_34F
1448 help
1449 This option enables elevator sorting for all probed SCSI disks and
1450 CD-ROMs. It definitely reduces the average seek distance when doing
1451 random seeks, but this does not necessarily result in a noticeable
1452 performance improvement: your mileage may vary...
1453 This is equivalent to the "u14-34f=lc:y" boot option.
1454
1455config SCSI_U14_34F_MAX_TAGS
1456 int "maximum number of queued commands"
1457 depends on SCSI_U14_34F
1458 default "8"
1459 help
1460 This specifies how many SCSI commands can be maximally queued for
1461 each probed SCSI device. You should reduce the default value of 8
1462 only if you have disks with buggy or limited tagged command support.
1463 Minimum is 2 and maximum is 14. This value is also the window size
1464 used by the elevator sorting option above. The effective value used
1465 by the driver for each probed SCSI device is reported at boot time.
1466 This is equivalent to the "u14-34f=mq:8" boot option.
1467
1468config SCSI_ULTRASTOR
1469 tristate "UltraStor SCSI support"
1470 depends on X86 && ISA && SCSI
1471 ---help---
1472 This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
1473 adapter family. This driver is explained in section 3.12 of the
1474 SCSI-HOWTO, available from
1475 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1476 of the box, you may have to change some settings in
1477 <file:drivers/scsi/ultrastor.h>.
1478
1479 Note that there is also another driver for the same hardware:
1480 "UltraStor 14F/34F support", above.
1481
1482 To compile this driver as a module, choose M here: the
1483 module will be called ultrastor.
1484
1485config SCSI_NSP32
1486 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1487 depends on PCI && SCSI && !64BIT
1488 help
1489 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1490 SCSI host adapter. Please read the SCSI-HOWTO, available from
1491 <http://www.tldp.org/docs.html#howto>.
1492
1493 To compile this driver as a module, choose M here: the
1494 module will be called nsp32.
1495
1496config SCSI_DEBUG
1497 tristate "SCSI debugging host simulator"
1498 depends on SCSI
1499 help
1500 This is a host adapter simulator that can simulate multiple hosts
1501 each with multiple dummy SCSI devices (disks). It defaults to one
1502 host adapter with one dummy SCSI disk. Each dummy disk uses kernel
1503 RAM as storage (i.e. it is a ramdisk). To save space when multiple
1504 dummy disks are simulated, they share the same kernel RAM for
1505 their storage. See <http://www.torque.net/sg/sdebug.html> for more
1506 information. This driver is primarily of use to those testing the
1507 SCSI and block subsystems. If unsure, say N.
1508
1509config SCSI_MESH
1510 tristate "MESH (Power Mac internal SCSI) support"
1511 depends on PPC32 && PPC_PMAC && SCSI
1512 help
1513 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1514 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1515 other Power Macintoshes do). Say Y to include support for this SCSI
1516 adaptor.
1517
1518 To compile this driver as a module, choose M here: the
1519 module will be called mesh.
1520
1521config SCSI_MESH_SYNC_RATE
1522 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1523 depends on SCSI_MESH
1524 default "5"
1525 help
1526 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1527 drives a bus which is entirely internal to the machine (such as the
1528 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1529 operation at up to 10 MB/s. On machines where the SCSI bus
1530 controlled by the MESH can have external devices connected, it is
1531 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1532 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1533 to disable synchronous operation.
1534
1535config SCSI_MESH_RESET_DELAY_MS
1536 int "initial bus reset delay (ms) (0 = no reset)"
1537 depends on SCSI_MESH
1538 default "4000"
1539
1540config SCSI_MAC53C94
1541 tristate "53C94 (Power Mac external SCSI) support"
1542 depends on PPC32 && PPC_PMAC && SCSI
1543 help
1544 On Power Macintoshes (and clones) with two SCSI buses, the external
1545 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1546 machines which only have one SCSI bus, such as the 7200, also use
1547 the 53C94. Say Y to include support for the 53C94.
1548
1549 To compile this driver as a module, choose M here: the
1550 module will be called mac53c94.
1551
1552source "drivers/scsi/arm/Kconfig"
1553
1554config JAZZ_ESP
1555 bool "MIPS JAZZ FAS216 SCSI support"
1556 depends on MACH_JAZZ && SCSI
1557 help
1558 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1559 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1560 systems.
1561
1562config A3000_SCSI
1563 tristate "A3000 WD33C93A support"
1564 depends on AMIGA && SCSI
1565 help
1566 If you have an Amiga 3000 and have SCSI devices connected to the
1567 built-in SCSI controller, say Y. Otherwise, say N.
1568
1569 To compile this driver as a module, choose M here: the
1570 module will be called wd33c93.
1571
1572config A2091_SCSI
1573 tristate "A2091/A590 WD33C93A support"
1574 depends on ZORRO && SCSI
1575 help
1576 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1577 say N.
1578
1579 To compile this driver as a module, choose M here: the
1580 module will be called wd33c93.
1581
1582config GVP11_SCSI
1583 tristate "GVP Series II WD33C93A support"
1584 depends on ZORRO && SCSI
1585 ---help---
1586 If you have a Great Valley Products Series II SCSI controller,
1587 answer Y. Also say Y if you have a later model of GVP SCSI
1588 controller (such as the GVP A4008 or a Combo board). Otherwise,
1589 answer N. This driver does NOT work for the T-Rex series of
1590 accelerators from TekMagic and GVP-M.
1591
1592 To compile this driver as a module, choose M here: the
1593 module will be called gvp11.
1594
1595config CYBERSTORM_SCSI
1596 tristate "CyberStorm SCSI support"
1597 depends on ZORRO && SCSI
1598 help
1599 If you have an Amiga with an original (MkI) Phase5 Cyberstorm
1600 accelerator board and the optional Cyberstorm SCSI controller,
1601 answer Y. Otherwise, say N.
1602
1603config CYBERSTORMII_SCSI
1604 tristate "CyberStorm Mk II SCSI support"
1605 depends on ZORRO && SCSI
1606 help
1607 If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
1608 and the optional Cyberstorm SCSI controller, say Y. Otherwise,
1609 answer N.
1610
1611config BLZ2060_SCSI
1612 tristate "Blizzard 2060 SCSI support"
1613 depends on ZORRO && SCSI
1614 help
1615 If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
1616 and want to use the onboard SCSI controller, say Y. Otherwise,
1617 answer N.
1618
1619config BLZ1230_SCSI
1620 tristate "Blizzard 1230IV/1260 SCSI support"
1621 depends on ZORRO && SCSI
1622 help
1623 If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
1624 1260 accelerator, and the optional SCSI module, say Y. Otherwise,
1625 say N.
1626
1627config FASTLANE_SCSI
1628 tristate "Fastlane SCSI support"
1629 depends on ZORRO && SCSI
1630 help
1631 If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
1632 one in the near future, say Y to this question. Otherwise, say N.
1633
1634config SCSI_AMIGA7XX
1635 bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)"
1636 depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN
1637 help
1638 Support for various NCR53c710-based SCSI controllers on the Amiga.
1639 This includes:
1640 - the builtin SCSI controller on the Amiga 4000T,
1641 - the Amiga 4091 Zorro III SCSI-2 controller,
1642 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1643 (info at
1644 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1645 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1646 accelerator card for the Amiga 1200,
1647 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1648 Note that all of the above SCSI controllers, except for the builtin
1649 SCSI controller on the Amiga 4000T, reside on the Zorro expansion
1650 bus, so you also have to enable Zorro bus support if you want to use
1651 them.
1652
1653config OKTAGON_SCSI
1654 tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
1655 depends on ZORRO && SCSI && EXPERIMENTAL
1656 help
1657 If you have the BSC Oktagon SCSI disk controller for the Amiga, say
1658 Y to this question. If you're in doubt about whether you have one,
1659 see the picture at
1660 <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
1661
1662config ATARI_SCSI
1663 tristate "Atari native SCSI support"
1664 depends on ATARI && SCSI && BROKEN
1665 ---help---
1666 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1667 Falcon, ...) say Y to get it supported. Of course also, if you have
1668 a compatible SCSI controller (e.g. for Medusa).
1669
1670 To compile this driver as a module, choose M here: the
1671 module will be called atari_scsi.
1672
1673 This driver supports both styles of NCR integration into the
1674 system: the TT style (separate DMA), and the Falcon style (via
1675 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1676 in the Hades (without DMA).
1677
1678config ATARI_SCSI_TOSHIBA_DELAY
1679 bool "Long delays for Toshiba CD-ROMs"
1680 depends on ATARI_SCSI
1681 help
1682 This option increases the delay after a SCSI arbitration to
1683 accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
1684 use a Toshiba CD-ROM drive; otherwise, the option is not needed and
1685 would impact performance a bit, so say N.
1686
1687config ATARI_SCSI_RESET_BOOT
1688 bool "Reset SCSI-devices at boottime"
1689 depends on ATARI_SCSI
1690 help
1691 Reset the devices on your Atari whenever it boots. This makes the
1692 boot process fractionally longer but may assist recovery from errors
1693 that leave the devices with SCSI operations partway completed.
1694
1695config TT_DMA_EMUL
1696 bool "Hades SCSI DMA emulator"
1697 depends on ATARI_SCSI && HADES
1698 help
1699 This option enables code which emulates the TT SCSI DMA chip on the
1700 Hades. This increases the SCSI transfer rates at least ten times
1701 compared to PIO transfers.
1702
1703config MAC_SCSI
1704 bool "Macintosh NCR5380 SCSI"
1705 depends on MAC && SCSI
1706 help
1707 This is the NCR 5380 SCSI controller included on most of the 68030
1708 based Macintoshes. If you have one of these say Y and read the
1709 SCSI-HOWTO, available from
1710 <http://www.tldp.org/docs.html#howto>.
1711
1712config SCSI_MAC_ESP
1713 tristate "Macintosh NCR53c9[46] SCSI"
1714 depends on MAC && SCSI
1715 help
1716 This is the NCR 53c9x SCSI controller found on most of the 68040
1717 based Macintoshes. If you have one of these say Y and read the
1718 SCSI-HOWTO, available from
1719 <http://www.tldp.org/docs.html#howto>.
1720
1721 To compile this driver as a module, choose M here: the
1722 module will be called mac_esp.
1723
1724config MVME147_SCSI
1725 bool "WD33C93 SCSI driver for MVME147"
1726 depends on MVME147 && SCSI
1727 help
1728 Support for the on-board SCSI controller on the Motorola MVME147
1729 single-board computer.
1730
1731config MVME16x_SCSI
1732 bool "NCR53C710 SCSI driver for MVME16x"
1733 depends on MVME16x && SCSI && BROKEN
1734 help
1735 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1736 SCSI controller chip. Almost everyone using one of these boards
1737 will want to say Y to this question.
1738
1739config BVME6000_SCSI
1740 bool "NCR53C710 SCSI driver for BVME6000"
1741 depends on BVME6000 && SCSI && BROKEN
1742 help
1743 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1744 SCSI controller chip. Almost everyone using one of these boards
1745 will want to say Y to this question.
1746
1747config SCSI_NCR53C7xx_FAST
1748 bool "allow FAST-SCSI [10MHz]"
1749 depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI
1750 help
1751 This will enable 10MHz FAST-SCSI transfers with your host
1752 adapter. Some systems have problems with that speed, so it's safest
1753 to say N here.
1754
1755config SUN3_SCSI
1756 tristate "Sun3 NCR5380 SCSI"
1757 depends on SUN3 && SCSI
1758 help
1759 This option will enable support for the OBIO (onboard io) NCR5380
1760 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1761 "Sun3" type VME scsi controllers also based on the NCR5380.
1762 General Linux information on the Sun 3 series (now discontinued)
1763 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1764
1765config SUN3X_ESP
1766 bool "Sun3x ESP SCSI"
1767 depends on SUN3X && SCSI
1768 help
1769 The ESP was an on-board SCSI controller used on Sun 3/80
1770 machines. Say Y here to compile in support for it.
1771
1772config SCSI_SUNESP
1773 tristate "Sparc ESP Scsi Driver"
1774 depends on SBUS && SCSI
1775 help
1776 This is the driver for the Sun ESP SCSI host adapter. The ESP
1777 chipset is present in most SPARC SBUS-based computers.
1778
1779 To compile this driver as a module, choose M here: the
1780 module will be called esp.
1781
1782# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
1783
1784config ZFCP
1785 tristate "FCP host bus adapter driver for IBM eServer zSeries"
1786 depends on ARCH_S390 && QDIO && SCSI
1787 select SCSI_FC_ATTRS
1788 help
1789 If you want to access SCSI devices attached to your IBM eServer
1790 zSeries by means of Fibre Channel interfaces say Y.
1791 For details please refer to the documentation provided by IBM at
1792 <http://oss.software.ibm.com/developerworks/opensource/linux390>
1793
1794 This driver is also available as a module. This module will be
1795 called zfcp. If you want to compile it as a module, say M here
1796 and read <file:Documentation/modules.txt>.
1797
1798endmenu
1799
1800source "drivers/scsi/pcmcia/Kconfig"
1801
1802endmenu