blob: 3981bf15c8c72a7db18958512254bef3e9f10eed [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 * (C) Copyright 2002 Hewlett-Packard Company
7 *
8 * Bus Glue for AMD Alchemy Au1xxx
9 *
10 * Written by Christopher Hoover <ch@hpl.hp.com>
11 * Based on fragments of previous driver by Rusell King et al.
12 *
13 * Modified for LH7A404 from ohci-sa1111.c
14 * by Durgesh Pattamatta <pattamattad@sharpsec.com>
15 * Modified for AMD Alchemy Au1xxx
16 * by Matt Porter <mporter@kernel.crashing.org>
17 *
18 * This file is licenced under the GPL.
19 */
20
21#include <asm/mach-au1x00/au1000.h>
22
23#define USBH_ENABLE_BE (1<<0)
24#define USBH_ENABLE_C (1<<1)
25#define USBH_ENABLE_E (1<<2)
26#define USBH_ENABLE_CE (1<<3)
27#define USBH_ENABLE_RD (1<<4)
28
29#ifdef __LITTLE_ENDIAN
30#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
31#elif __BIG_ENDIAN
32#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
33#else
34#error not byte order defined
35#endif
36
37extern int usb_disabled(void);
38
39/*-------------------------------------------------------------------------*/
40
41static void au1xxx_start_hc(struct platform_device *dev)
42{
43 printk(KERN_DEBUG __FILE__
44 ": starting Au1xxx OHCI USB Controller\n");
45
46 /* enable host controller */
47 au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
48 udelay(1000);
49 au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
50 udelay(1000);
51
52 /* wait for reset complete (read register twice; see au1500 errata) */
53 while (au_readl(USB_HOST_CONFIG),
54 !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
55 udelay(1000);
56
57 printk(KERN_DEBUG __FILE__
58 ": Clock to USB host has been enabled \n");
59}
60
61static void au1xxx_stop_hc(struct platform_device *dev)
62{
63 printk(KERN_DEBUG __FILE__
64 ": stopping Au1xxx OHCI USB Controller\n");
65
66 /* Disable clock */
67 au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
68}
69
70
71/*-------------------------------------------------------------------------*/
72
73/* configure so an HC device and id are always provided */
74/* always called with process context; sleeping is OK */
75
76
77/**
78 * usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs
79 * Context: !in_interrupt()
80 *
81 * Allocates basic resources for this USB host controller, and
82 * then invokes the start() method for the HCD associated with it
83 * through the hotplug entry's driver_data.
84 *
85 */
86int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
87 struct platform_device *dev)
88{
89 int retval;
90 struct usb_hcd *hcd;
91
92 if(dev->resource[1].flags != IORESOURCE_IRQ) {
93 pr_debug ("resource[1] is not IORESOURCE_IRQ");
94 return -ENOMEM;
95 }
96
97 hcd = usb_create_hcd(driver, &dev->dev, "au1xxx");
98 if (!hcd)
99 return -ENOMEM;
100 hcd->rsrc_start = dev->resource[0].start;
101 hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
102
103 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
104 pr_debug("request_mem_region failed");
105 retval = -EBUSY;
106 goto err1;
107 }
108
109 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
110 if (!hcd->regs) {
111 pr_debug("ioremap failed");
112 retval = -ENOMEM;
113 goto err2;
114 }
115
116 au1xxx_start_hc(dev);
117 ohci_hcd_init(hcd_to_ohci(hcd));
118
119 retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
120 if (retval == 0)
121 return retval;
122
123 au1xxx_stop_hc(dev);
124 iounmap(hcd->regs);
125 err2:
126 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
127 err1:
128 usb_put_hcd(hcd);
129 return retval;
130}
131
132
133/* may be called without controller electrically present */
134/* may be called with controller, bus, and devices active */
135
136/**
137 * usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
138 * @dev: USB Host Controller being removed
139 * Context: !in_interrupt()
140 *
141 * Reverses the effect of usb_hcd_au1xxx_probe(), first invoking
142 * the HCD's stop() method. It is always called from a thread
143 * context, normally "rmmod", "apmd", or something similar.
144 *
145 */
146void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev)
147{
148 usb_remove_hcd(hcd);
149 au1xxx_stop_hc(dev);
150 iounmap(hcd->regs);
151 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
152 usb_put_hcd(hcd);
153}
154
155/*-------------------------------------------------------------------------*/
156
157static int __devinit
158ohci_au1xxx_start (struct usb_hcd *hcd)
159{
160 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
161 int ret;
162
163 ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);
164
165 if ((ret = ohci_init (ohci)) < 0)
166 return ret;
167
168 if ((ret = ohci_run (ohci)) < 0) {
169 err ("can't start %s", hcd->self.bus_name);
170 ohci_stop (hcd);
171 return ret;
172 }
173
174 return 0;
175}
176
177/*-------------------------------------------------------------------------*/
178
179static const struct hc_driver ohci_au1xxx_hc_driver = {
180 .description = hcd_name,
181 .product_desc = "Au1xxx OHCI",
182 .hcd_priv_size = sizeof(struct ohci_hcd),
183
184 /*
185 * generic hardware linkage
186 */
187 .irq = ohci_irq,
188 .flags = HCD_USB11 | HCD_MEMORY,
189
190 /*
191 * basic lifecycle operations
192 */
193 .start = ohci_au1xxx_start,
194#ifdef CONFIG_PM
195 /* suspend: ohci_au1xxx_suspend, -- tbd */
196 /* resume: ohci_au1xxx_resume, -- tbd */
197#endif /*CONFIG_PM*/
198 .stop = ohci_stop,
199
200 /*
201 * managing i/o requests and associated device resources
202 */
203 .urb_enqueue = ohci_urb_enqueue,
204 .urb_dequeue = ohci_urb_dequeue,
205 .endpoint_disable = ohci_endpoint_disable,
206
207 /*
208 * scheduling support
209 */
210 .get_frame_number = ohci_get_frame,
211
212 /*
213 * root hub support
214 */
215 .hub_status_data = ohci_hub_status_data,
216 .hub_control = ohci_hub_control,
217};
218
219/*-------------------------------------------------------------------------*/
220
221static int ohci_hcd_au1xxx_drv_probe(struct device *dev)
222{
223 struct platform_device *pdev = to_platform_device(dev);
224 int ret;
225
226 pr_debug ("In ohci_hcd_au1xxx_drv_probe");
227
228 if (usb_disabled())
229 return -ENODEV;
230
231 ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
232 return ret;
233}
234
235static int ohci_hcd_au1xxx_drv_remove(struct device *dev)
236{
237 struct platform_device *pdev = to_platform_device(dev);
238 struct usb_hcd *hcd = dev_get_drvdata(dev);
239
240 usb_hcd_au1xxx_remove(hcd, pdev);
241 return 0;
242}
243 /*TBD*/
244/*static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
245{
246 struct platform_device *pdev = to_platform_device(dev);
247 struct usb_hcd *hcd = dev_get_drvdata(dev);
248
249 return 0;
250}
251static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
252{
253 struct platform_device *pdev = to_platform_device(dev);
254 struct usb_hcd *hcd = dev_get_drvdata(dev);
255
256 return 0;
257}
258*/
259
260static struct device_driver ohci_hcd_au1xxx_driver = {
261 .name = "au1xxx-ohci",
262 .bus = &platform_bus_type,
263 .probe = ohci_hcd_au1xxx_drv_probe,
264 .remove = ohci_hcd_au1xxx_drv_remove,
265 /*.suspend = ohci_hcd_au1xxx_drv_suspend, */
266 /*.resume = ohci_hcd_au1xxx_drv_resume, */
267};
268
269static int __init ohci_hcd_au1xxx_init (void)
270{
271 pr_debug (DRIVER_INFO " (Au1xxx)");
272 pr_debug ("block sizes: ed %d td %d\n",
273 sizeof (struct ed), sizeof (struct td));
274
275 return driver_register(&ohci_hcd_au1xxx_driver);
276}
277
278static void __exit ohci_hcd_au1xxx_cleanup (void)
279{
280 driver_unregister(&ohci_hcd_au1xxx_driver);
281}
282
283module_init (ohci_hcd_au1xxx_init);
284module_exit (ohci_hcd_au1xxx_cleanup);