blob: ecb7733a09499a0179c3c35f867857c287a47d02 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/include/asm-arm/arch-rpc/acornfb.h
3 *
4 * Copyright (C) 1999 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * AcornFB architecture specific code
11 */
12
13#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
14
15static inline int
16acornfb_valid_pixrate(struct fb_var_screeninfo *var)
17{
18 u_long limit;
19
20 if (!var->pixclock)
21 return 0;
22
23 /*
24 * Limits below are taken from RISC OS bandwidthlimit file
25 */
26 if (current_par.using_vram) {
27 if (current_par.vram_half_sam == 2048)
28 limit = 6578;
29 else
30 limit = 13157;
31 } else {
32 limit = 26315;
33 }
34
35 return acornfb_bandwidth(var) >= limit;
36}
37
38/*
39 * Try to find the best PLL parameters for the pixel clock.
40 * This algorithm seems to give best predictable results,
41 * and produces the same values as detailed in the VIDC20
42 * data sheet.
43 */
44static inline u_int
45acornfb_vidc20_find_pll(u_int pixclk)
46{
47 u_int r, best_r = 2, best_v = 2;
48 int best_d = 0x7fffffff;
49
50 for (r = 2; r <= 32; r++) {
51 u_int rr, v, p;
52 int d;
53
54 rr = 41667 * r;
55
56 v = (rr + pixclk / 2) / pixclk;
57
58 if (v > 32 || v < 2)
59 continue;
60
61 p = (rr + v / 2) / v;
62
63 d = pixclk - p;
64
65 if (d < 0)
66 d = -d;
67
68 if (d < best_d) {
69 best_d = d;
70 best_v = v - 1;
71 best_r = r - 1;
72 }
73
74 if (d == 0)
75 break;
76 }
77
78 return best_v << 8 | best_r;
79}
80
81static inline void
82acornfb_vidc20_find_rates(struct vidc_timing *vidc,
83 struct fb_var_screeninfo *var)
84{
85 u_int div;
86
87 /* Select pixel-clock divisor to keep PLL in range */
88 div = var->pixclock / 9090; /*9921*/
89
90 /* Limit divisor */
91 if (div == 0)
92 div = 1;
93 if (div > 8)
94 div = 8;
95
96 /* Encode divisor to VIDC20 setting */
97 switch (div) {
98 case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break;
99 case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break;
100 case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break;
101 case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break;
102 case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break;
103 case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break;
104 case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break;
105 case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
106 }
107
108 /*
109 * With VRAM, the FIFO can be set to the highest possible setting
110 * because there are no latency considerations for other memory
111 * accesses. However, in 64 bit bus mode the FIFO preload value
112 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
113 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
114 * FIFO preload value).
115 */
116 if (current_par.using_vram) {
117 if (current_par.vram_half_sam == 2048)
118 vidc->control |= VIDC20_CTRL_FIFO_24;
119 else
120 vidc->control |= VIDC20_CTRL_FIFO_28;
121 } else {
122 unsigned long bandwidth = acornfb_bandwidth(var);
123
124 /* Encode bandwidth as VIDC20 setting */
125 if (bandwidth > 33334) /* < 30.0MB/s */
126 vidc->control |= VIDC20_CTRL_FIFO_16;
127 else if (bandwidth > 26666) /* < 37.5MB/s */
128 vidc->control |= VIDC20_CTRL_FIFO_20;
129 else if (bandwidth > 22222) /* < 45.0MB/s */
130 vidc->control |= VIDC20_CTRL_FIFO_24;
131 else /* > 45.0MB/s */
132 vidc->control |= VIDC20_CTRL_FIFO_28;
133 }
134
135 /* Find the PLL values */
136 vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
137}
138
139#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK)
140#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))