blob: d8e7e2d6128e70f5f170f58188da06966485af50 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * arch/ppc/kernel/mpc10x.h
3 *
4 * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
5 * ctlr/EPIC/etc.
6 *
7 * Author: Mark A. Greer
8 * mgreer@mvista.com
9 *
10 * 2001 (c) MontaVista, Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
14 */
15#ifndef __PPC_KERNEL_MPC10X_H
16#define __PPC_KERNEL_MPC10X_H
17
18#include <linux/pci_ids.h>
19#include <asm/pci-bridge.h>
20
21/*
22 * The values here don't completely map everything but should work in most
23 * cases.
24 *
25 * MAP A (PReP Map)
26 * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
27 * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
28 * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
29 * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
30 *
31 * MAP B (CHRP Map)
32 * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
33 * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
34 * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
35 * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
36 */
37
38/*
39 * Define the vendor/device IDs for the various bridges--should be added to
40 * <linux/pci_ids.h>
41 */
42#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
43 PCI_VENDOR_ID_MOTOROLA)
44#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
45#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
46#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
47
48/* Define the type of map to use */
49#define MPC10X_MEM_MAP_A 1
50#define MPC10X_MEM_MAP_B 2
51
52/* Map A (PReP Map) Defines */
53#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
54#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
55
56#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
57#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
58#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
59
60#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0
61#define MPC10X_MAPA_PCI_IO_START 0x00000000
62#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
63#define MPC10X_MAPA_PCI_MEM_START 0x00000000
64#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
65
66#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
67 MPC10X_MAPA_PCI_MEM_START)
68
69/* Map B (CHRP Map) Defines */
70#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
71#define MPC10X_MAPB_CNFG_DATA 0xfee00000
72
73#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
74#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
75#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
76
77#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000
78#define MPC10X_MAPB_PCI_IO_START 0x00000000
79#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
80#define MPC10X_MAPB_PCI_MEM_START 0x80000000
81#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
82
83#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
84 MPC10X_MAPB_PCI_MEM_START)
85
86/* Set hose members to values appropriate for the mem map used */
87#define MPC10X_SETUP_HOSE(hose, map) { \
88 (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
89 (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
90 (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
91 (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
92 (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
93 (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
94}
95
96
97/* Miscellaneous Configuration register offsets */
98#define MPC10X_CFG_PIR_REG 0x09
99#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
100#define MPC10X_CFG_PIR_AGENT 0x01
101
102#define MPC10X_CFG_EUMBBAR 0x78
103
104#define MPC10X_CFG_PICR1_REG 0xa8
105#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
106#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
107#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
108#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004
109#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
110
111#define MPC10X_CFG_PICR2_REG 0xac
112#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001
113
114#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
115#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
116#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
117#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
118#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */
119#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */
120
121/* Define offsets for the memory controller registers in the config space */
122#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
123#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
124#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
125#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
126
127#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
128#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
129#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
130#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
131
132#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
133
134/* Define some offset in the EUMB */
135#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
136
137#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
138#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
139#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
140#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
141#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
142#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
143#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
144#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
145#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
146#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
147#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
148#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
149#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
150#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
151#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
152#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
153
154/*
155 * Define some recommended places to put the EUMB regs.
156 * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
157 */
158extern unsigned long ioremap_base;
159#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
160#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
161
162
163int mpc10x_bridge_init(struct pci_controller *hose,
164 uint current_map,
165 uint new_map,
166 uint phys_eumb_base);
167unsigned long mpc10x_get_mem_size(uint mem_map);
168int mpc10x_enable_store_gathering(struct pci_controller *hose);
169int mpc10x_disable_store_gathering(struct pci_controller *hose);
170
171/* For MPC107 boards that use the built-in openpic */
172void mpc10x_set_openpic(void);
173
174#endif /* __PPC_KERNEL_MPC10X_H */