blob: 1dc3ab0523fdd6ab8778364158de22bde8991d2f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*****************************************************************************/
2
3/*
4 * cd1400.h -- cd1400 UART hardware info.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _CD1400_H
26#define _CD1400_H
27/*****************************************************************************/
28
29/*
30 * Define the number of async ports per cd1400 uart chip.
31 */
32#define CD1400_PORTS 4
33
34/*
35 * Define the cd1400 uarts internal FIFO sizes.
36 */
37#define CD1400_TXFIFOSIZE 12
38#define CD1400_RXFIFOSIZE 12
39
40/*
41 * Local RX FIFO thresh hold level. Also define the RTS thresh hold
42 * based on the RX thresh hold.
43 */
44#define FIFO_RXTHRESHOLD 6
45#define FIFO_RTSTHRESHOLD 7
46
47/*****************************************************************************/
48
49/*
50 * Define the cd1400 register addresses. These are all the valid
51 * registers with the cd1400. Some are global, some virtual, some
52 * per port.
53 */
54#define GFRCR 0x40
55#define CAR 0x68
56#define GCR 0x4b
57#define SVRR 0x67
58#define RICR 0x44
59#define TICR 0x45
60#define MICR 0x46
61#define RIR 0x6b
62#define TIR 0x6a
63#define MIR 0x69
64#define PPR 0x7e
65
66#define RIVR 0x43
67#define TIVR 0x42
68#define MIVR 0x41
69#define TDR 0x63
70#define RDSR 0x62
71#define MISR 0x4c
72#define EOSRR 0x60
73
74#define LIVR 0x18
75#define CCR 0x05
76#define SRER 0x06
77#define COR1 0x08
78#define COR2 0x09
79#define COR3 0x0a
80#define COR4 0x1e
81#define COR5 0x1f
82#define CCSR 0x0b
83#define RDCR 0x0e
84#define SCHR1 0x1a
85#define SCHR2 0x1b
86#define SCHR3 0x1c
87#define SCHR4 0x1d
88#define SCRL 0x22
89#define SCRH 0x23
90#define LNC 0x24
91#define MCOR1 0x15
92#define MCOR2 0x16
93#define RTPR 0x21
94#define MSVR1 0x6c
95#define MSVR2 0x6d
96#define PSVR 0x6f
97#define RBPR 0x78
98#define RCOR 0x7c
99#define TBPR 0x72
100#define TCOR 0x76
101
102/*****************************************************************************/
103
104/*
105 * Define the set of baud rate clock divisors.
106 */
107#define CD1400_CLK0 8
108#define CD1400_CLK1 32
109#define CD1400_CLK2 128
110#define CD1400_CLK3 512
111#define CD1400_CLK4 2048
112
113#define CD1400_NUMCLKS 5
114
115/*****************************************************************************/
116
117/*
118 * Define the clock pre-scalar value to be a 5 ms clock. This should be
119 * OK for now. It would probably be better to make it 10 ms, but we
120 * can't fit that divisor into 8 bits!
121 */
122#define PPR_SCALAR 244
123
124/*****************************************************************************/
125
126/*
127 * Define values used to set character size options.
128 */
129#define COR1_CHL5 0x00
130#define COR1_CHL6 0x01
131#define COR1_CHL7 0x02
132#define COR1_CHL8 0x03
133
134/*
135 * Define values used to set the number of stop bits.
136 */
137#define COR1_STOP1 0x00
138#define COR1_STOP15 0x04
139#define COR1_STOP2 0x08
140
141/*
142 * Define values used to set the parity scheme in use.
143 */
144#define COR1_PARNONE 0x00
145#define COR1_PARFORCE 0x20
146#define COR1_PARENB 0x40
147#define COR1_PARIGNORE 0x10
148
149#define COR1_PARODD 0x80
150#define COR1_PAREVEN 0x00
151
152#define COR2_IXM 0x80
153#define COR2_TXIBE 0x40
154#define COR2_ETC 0x20
155#define COR2_LLM 0x10
156#define COR2_RLM 0x08
157#define COR2_RTSAO 0x04
158#define COR2_CTSAE 0x02
159
160#define COR3_SCDRNG 0x80
161#define COR3_SCD34 0x40
162#define COR3_FCT 0x20
163#define COR3_SCD12 0x10
164
165/*
166 * Define values used by COR4.
167 */
168#define COR4_BRKINT 0x08
169#define COR4_IGNBRK 0x18
170
171/*****************************************************************************/
172
173/*
174 * Define the modem control register values.
175 * Note that the actual hardware is a little different to the conventional
176 * pin names on the cd1400.
177 */
178#define MSVR1_DTR 0x01
179#define MSVR1_DSR 0x10
180#define MSVR1_RI 0x20
181#define MSVR1_CTS 0x40
182#define MSVR1_DCD 0x80
183
184#define MSVR2_RTS 0x02
185#define MSVR2_DSR 0x10
186#define MSVR2_RI 0x20
187#define MSVR2_CTS 0x40
188#define MSVR2_DCD 0x80
189
190#define MCOR1_DCD 0x80
191#define MCOR1_CTS 0x40
192#define MCOR1_RI 0x20
193#define MCOR1_DSR 0x10
194
195#define MCOR2_DCD 0x80
196#define MCOR2_CTS 0x40
197#define MCOR2_RI 0x20
198#define MCOR2_DSR 0x10
199
200/*****************************************************************************/
201
202/*
203 * Define the bits used with the service (interrupt) enable register.
204 */
205#define SRER_NNDT 0x01
206#define SRER_TXEMPTY 0x02
207#define SRER_TXDATA 0x04
208#define SRER_RXDATA 0x10
209#define SRER_MODEM 0x80
210
211/*****************************************************************************/
212
213/*
214 * Define operational commands for the command register.
215 */
216#define CCR_RESET 0x80
217#define CCR_CORCHANGE 0x4e
218#define CCR_SENDCH 0x20
219#define CCR_CHANCTRL 0x10
220
221#define CCR_TXENABLE (CCR_CHANCTRL | 0x08)
222#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04)
223#define CCR_RXENABLE (CCR_CHANCTRL | 0x02)
224#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01)
225
226#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01)
227#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02)
228#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03)
229#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04)
230
231#define CCR_RESETCHAN (CCR_RESET | 0x00)
232#define CCR_RESETFULL (CCR_RESET | 0x01)
233#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
234
235#define CCR_MAXWAIT 10000
236
237/*****************************************************************************/
238
239/*
240 * Define the valid acknowledgement types (for hw ack cycle).
241 */
242#define ACK_TYPMASK 0x07
243#define ACK_TYPTX 0x02
244#define ACK_TYPMDM 0x01
245#define ACK_TYPRXGOOD 0x03
246#define ACK_TYPRXBAD 0x07
247
248#define SVRR_RX 0x01
249#define SVRR_TX 0x02
250#define SVRR_MDM 0x04
251
252#define ST_OVERRUN 0x01
253#define ST_FRAMING 0x02
254#define ST_PARITY 0x04
255#define ST_BREAK 0x08
256#define ST_SCHAR1 0x10
257#define ST_SCHAR2 0x20
258#define ST_SCHAR3 0x30
259#define ST_SCHAR4 0x40
260#define ST_RANGE 0x70
261#define ST_SCHARMASK 0x70
262#define ST_TIMEOUT 0x80
263
264#define MISR_DCD 0x80
265#define MISR_CTS 0x40
266#define MISR_RI 0x20
267#define MISR_DSR 0x10
268
269/*****************************************************************************/
270
271/*
272 * Defines for the CCSR status register.
273 */
274#define CCSR_RXENABLED 0x80
275#define CCSR_RXFLOWON 0x40
276#define CCSR_RXFLOWOFF 0x20
277#define CCSR_TXENABLED 0x08
278#define CCSR_TXFLOWON 0x04
279#define CCSR_TXFLOWOFF 0x02
280
281/*****************************************************************************/
282
283/*
284 * Define the embedded commands.
285 */
286#define ETC_CMD 0x00
287#define ETC_STARTBREAK 0x81
288#define ETC_DELAY 0x82
289#define ETC_STOPBREAK 0x83
290
291/*****************************************************************************/
292#endif