blob: 6d58fdf349b52c865d6a37e3a771c166bfe5466e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: ns87303.h,v 1.3 2000/01/09 15:16:34 ecd Exp $
2 * ns87303.h: Configuration Register Description for the
3 * National Semiconductor PC87303 (SuperIO).
4 *
5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 */
7
8#ifndef _SPARC_NS87303_H
9#define _SPARC_NS87303_H 1
10
11/*
12 * Control Register Index Values
13 */
14#define FER 0x00
15#define FAR 0x01
16#define PTR 0x02
17#define FCR 0x03
18#define PCR 0x04
19#define KRR 0x05
20#define PMC 0x06
21#define TUP 0x07
22#define SID 0x08
23#define ASC 0x09
24#define CS0CF0 0x0a
25#define CS0CF1 0x0b
26#define CS1CF0 0x0c
27#define CS1CF1 0x0d
28
29/* Function Enable Register (FER) bits */
30#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */
31
32/* Function Address Register (FAR) bits */
33#define FAR_LPT_MASK 0x03
34#define FAR_LPTB 0x00
35#define FAR_LPTA 0x01
36#define FAR_LPTC 0x02
37
38/* Power and Test Register (PTR) bits */
39#define PTR_LPTB_IRQ7 0x08
40#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */
41#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */
42 /* of the parallel port */
43
44/* Function Control Register (FCR) bits */
45#define FCR_LDE 0x10 /* Logical Drive Exchange */
46#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */
47
48/* Printer Control Register (PCR) bits */
49#define PCR_EPP_ENABLE 0x01
50#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */
51#define PCR_ECP_ENABLE 0x04
52#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */
53#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */
54 /* if 1 polarity is inverted */
55#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */
56
57/* Tape UARTs and Parallel Port Config Register (TUP) bits */
58#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */
59
60/* Advanced SuperIO Config Register (ASC) bits */
61#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */
62#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */
63
64#define FER_RESERVED 0x00
65#define FAR_RESERVED 0x00
66#define PTR_RESERVED 0x73
67#define FCR_RESERVED 0xc4
68#define PCR_RESERVED 0x10
69#define KRR_RESERVED 0x00
70#define PMC_RESERVED 0x98
71#define TUP_RESERVED 0xfb
72#define SIP_RESERVED 0x00
73#define ASC_RESERVED 0x18
74#define CS0CF0_RESERVED 0x00
75#define CS0CF1_RESERVED 0x08
76#define CS1CF0_RESERVED 0x00
77#define CS1CF1_RESERVED 0x08
78
79#ifdef __KERNEL__
80
81#include <linux/spinlock.h>
82
83#include <asm/system.h>
84#include <asm/io.h>
85
86extern spinlock_t ns87303_lock;
87
88static __inline__ int ns87303_modify(unsigned long port, unsigned int index,
89 unsigned char clr, unsigned char set)
90{
91 static unsigned char reserved[] = {
92 FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
93 PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
94 SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
95 CS1CF0_RESERVED, CS1CF1_RESERVED
96 };
97 unsigned long flags;
98 unsigned char value;
99
100 if (index > 0x0d)
101 return -EINVAL;
102
103 spin_lock_irqsave(&ns87303_lock, flags);
104
105 outb(index, port);
106 value = inb(port + 1);
107 value &= ~(reserved[index] | clr);
108 value |= set;
109 outb(value, port + 1);
110 outb(value, port + 1);
111
112 spin_unlock_irqrestore(&ns87303_lock, flags);
113
114 return 0;
115}
116
117#endif /* __KERNEL__ */
118
119#endif /* !(_SPARC_NS87303_H) */