blob: fba87abe78ee21f96b87fac12156fc1e35dead64 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0
2 * driver for linux.
3 */
4
5/*
6 Written 1996 by Russell Nelson, with reference to skeleton.c
7 written 1993-1994 by Donald Becker.
8
9 This software may be used and distributed according to the terms
10 of the GNU General Public License, incorporated herein by reference.
11
12 The author may be reached at nelson@crynwr.com, Crynwr
13 Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
14
15 Changelog:
16
17 Mike Cruse : mcruse@cti-ltd.com
Jeff Garzik6aa20a22006-09-13 13:24:59 -040018 : Changes for Linux 2.0 compatibility.
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 : Added dev_id parameter in net_interrupt(),
20 : request_irq() and free_irq(). Just NULL for now.
21
22 Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
23 : in net_open() and net_close() so kerneld would know
Jeff Garzik6aa20a22006-09-13 13:24:59 -040024 : that the module is in use and wouldn't eject the
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 : driver prematurely.
26
27 Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
28 : as an example. Disabled autoprobing in init_module(),
29 : not a good thing to do to other devices while Linux
30 : is running from all accounts.
31
32 Russ Nelson : Jul 13 1998. Added RxOnly DMA support.
33
Jeff Garzik6aa20a22006-09-13 13:24:59 -040034 Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility.
Linus Torvalds1da177e2005-04-16 15:20:36 -070035 : email: ethernet@crystal.cirrus.com
36
37 Alan Cox : Removed 1.2 support, added 2.1 extra counters.
38
39 Andrew Morton : andrewm@uow.edu.au
40 : Kernel 2.3.48
41 : Handle kmalloc() failures
42 : Other resource allocation fixes
43 : Add SMP locks
44 : Integrate Russ Nelson's ALLOW_DMA functionality back in.
45 : If ALLOW_DMA is true, make DMA runtime selectable
46 : Folded in changes from Cirrus (Melody Lee
47 : <klee@crystal.cirrus.com>)
48 : Don't call netif_wake_queue() in net_send_packet()
49 : Fixed an out-of-mem bug in dma_rx()
50 : Updated Documentation/networking/cs89x0.txt
51
52 Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre1
53 : Use skb_reserve to longword align IP header (two places)
54 : Remove a delay loop from dma_rx()
55 : Replace '100' with HZ
56 : Clean up a couple of skb API abuses
57 : Added 'cs89x0_dma=N' kernel boot option
58 : Correctly initialise lp->lock in non-module compile
59
60 Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre4-1
61 : MOD_INC/DEC race fix (see
62 : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html)
63
64 Andrew Morton : andrewm@uow.edu.au / Kernel 2.4.0-test7-pre2
65 : Enhanced EEPROM support to cover more devices,
66 : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch
67 : (Jason Gunthorpe <jgg@ualberta.ca>)
68
69 Andrew Morton : Kernel 2.4.0-test11-pre4
70 : Use dev->name in request_*() (Andrey Panin)
71 : Fix an error-path memleak in init_module()
72 : Preserve return value from request_irq()
73 : Fix type of `media' module parm (Keith Owens)
74 : Use SET_MODULE_OWNER()
75 : Tidied up strange request_irq() abuse in net_open().
76
77 Andrew Morton : Kernel 2.4.3-pre1
78 : Request correct number of pages for DMA (Hugh Dickens)
79 : Select PP_ChipID _after_ unregister_netdev in cleanup_module()
80 : because unregister_netdev() calls get_stats.
81 : Make `version[]' __initdata
82 : Uninlined the read/write reg/word functions.
83
84 Oskar Schirmer : oskar@scara.com
85 : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
86
87 Deepak Saxena : dsaxena@plexity.net
88 : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
89
Lennert Buytenhek032874e2006-01-14 13:21:15 -080090 Dmitry Pervushin : dpervushin@ru.mvista.com
91 : PNX010X platform support
92
Deepak Saxena9c878962006-01-14 13:21:18 -080093 Deepak Saxena : dsaxena@plexity.net
94 : Intel IXDP2351 platform support
95
Lennert Buytenhek5aeebe02006-01-16 22:14:53 -080096 Dmitry Pervushin : dpervushin@ru.mvista.com
97 : PNX010X platform support
98
Linus Torvalds1da177e2005-04-16 15:20:36 -070099*/
100
101/* Always include 'config.h' first in case the user wants to turn on
102 or override something. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103#include <linux/module.h>
104
105/*
106 * Set this to zero to disable DMA code
107 *
108 * Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
109 * module options so we don't break any startup scripts.
110 */
Lennert Buytenhek91e1c462006-01-11 12:17:34 -0800111#ifndef CONFIG_ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112#define ALLOW_DMA 0
113#else
114#define ALLOW_DMA 1
115#endif
116
117/*
118 * Set this to zero to remove all the debug statements via
119 * dead code elimination
120 */
121#define DEBUGGING 1
122
123/*
124 Sources:
125
126 Crynwr packet driver epktisa.
127
128 Crystal Semiconductor data sheets.
129
130*/
131
132#include <linux/errno.h>
133#include <linux/netdevice.h>
134#include <linux/etherdevice.h>
135#include <linux/kernel.h>
136#include <linux/types.h>
137#include <linux/fcntl.h>
138#include <linux/interrupt.h>
139#include <linux/ioport.h>
140#include <linux/in.h>
141#include <linux/skbuff.h>
142#include <linux/slab.h>
143#include <linux/spinlock.h>
144#include <linux/string.h>
145#include <linux/init.h>
146#include <linux/bitops.h>
147#include <linux/delay.h>
148
149#include <asm/system.h>
150#include <asm/io.h>
Al Viro7625d482005-09-26 05:25:59 +0100151#include <asm/irq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152#if ALLOW_DMA
153#include <asm/dma.h>
154#endif
155
156#include "cs89x0.h"
157
158static char version[] __initdata =
159"cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>\n";
160
161#define DRV_NAME "cs89x0"
162
163/* First, a few definitions that the brave might change.
164 A zero-terminated list of I/O addresses to be probed. Some special flags..
165 Addr & 1 = Read back the address port, look for signature and reset
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400166 the page window before probing
167 Addr & 3 = Reset the page window and probe
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168 The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
169 but it is possible that a Cirrus board could be plugged into the ISA
170 slots. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400171/* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172 them to system IRQ numbers. This mapping is card specific and is set to
173 the configuration of the Cirrus Eval board for this chip. */
174#ifdef CONFIG_ARCH_CLPS7500
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100175static unsigned int netcard_portlist[] __used __initdata =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176 { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
177static unsigned int cs8900_irq_map[] = {12,0,0,0};
178#elif defined(CONFIG_SH_HICOSH4)
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100179static unsigned int netcard_portlist[] __used __initdata =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180 { 0x0300, 0};
181static unsigned int cs8900_irq_map[] = {1,0,0,0};
Deepak Saxena9c878962006-01-14 13:21:18 -0800182#elif defined(CONFIG_MACH_IXDP2351)
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100183static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
Deepak Saxena9c878962006-01-14 13:21:18 -0800184static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
185#include <asm/irq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186#elif defined(CONFIG_ARCH_IXDP2X01)
187#include <asm/irq.h>
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100188static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
Lennert Buytenhek277cb102006-01-08 01:01:14 -0800190#elif defined(CONFIG_ARCH_PNX010X)
dmitry pervushin0dd3c782005-06-20 15:32:54 -0700191#include <asm/irq.h>
192#include <asm/arch/gpio.h>
193#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
194#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100195static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
dmitry pervushin0dd3c782005-06-20 15:32:54 -0700196static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197#else
Leonardo Potenzaa80763c2008-02-17 18:23:15 +0100198static unsigned int netcard_portlist[] __used __initdata =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199 { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
200static unsigned int cs8900_irq_map[] = {10,11,12,5};
201#endif
202
203#if DEBUGGING
204static unsigned int net_debug = DEBUGGING;
205#else
206#define net_debug 0 /* gcc will remove all the debug code for us */
207#endif
208
209/* The number of low I/O ports used by the ethercard. */
210#define NETCARD_IO_EXTENT 16
211
212/* we allow the user to override various values normally set in the EEPROM */
213#define FORCE_RJ45 0x0001 /* pick one of these three */
214#define FORCE_AUI 0x0002
215#define FORCE_BNC 0x0004
216
217#define FORCE_AUTO 0x0010 /* pick one of these three */
218#define FORCE_HALF 0x0020
219#define FORCE_FULL 0x0030
220
221/* Information that need to be kept for each board. */
222struct net_local {
223 struct net_device_stats stats;
224 int chip_type; /* one of: CS8900, CS8920, CS8920M */
225 char chip_revision; /* revision letter of the chip ('A'...) */
226 int send_cmd; /* the proper send command: TX_NOW, TX_AFTER_381, or TX_AFTER_ALL */
227 int auto_neg_cnf; /* auto-negotiation word from EEPROM */
228 int adapter_cnf; /* adapter configuration from EEPROM */
229 int isa_config; /* ISA configuration from EEPROM */
230 int irq_map; /* IRQ map from EEPROM */
231 int rx_mode; /* what mode are we in? 0, RX_MULTCAST_ACCEPT, or RX_ALL_ACCEPT */
232 int curr_rx_cfg; /* a copy of PP_RxCFG */
233 int linectl; /* either 0 or LOW_RX_SQUELCH, depending on configuration. */
234 int send_underrun; /* keep track of how many underruns in a row we get */
235 int force; /* force various values; see FORCE* above. */
236 spinlock_t lock;
237#if ALLOW_DMA
238 int use_dma; /* Flag: we're using dma */
239 int dma; /* DMA channel */
240 int dmasize; /* 16 or 64 */
241 unsigned char *dma_buff; /* points to the beginning of the buffer */
242 unsigned char *end_dma_buff; /* points to the end of the buffer */
243 unsigned char *rx_dma_ptr; /* points to the next packet */
244#endif
245};
246
247/* Index to functions, as function prototypes. */
248
249static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
250static int net_open(struct net_device *dev);
251static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100252static irqreturn_t net_interrupt(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253static void set_multicast_list(struct net_device *dev);
254static void net_timeout(struct net_device *dev);
255static void net_rx(struct net_device *dev);
256static int net_close(struct net_device *dev);
257static struct net_device_stats *net_get_stats(struct net_device *dev);
258static void reset_chip(struct net_device *dev);
259static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer);
260static int get_eeprom_cksum(int off, int len, int *buffer);
261static int set_mac_address(struct net_device *dev, void *addr);
262static void count_rx_errors(int status, struct net_local *lp);
Deepak Saxena6f519162005-09-09 13:02:07 -0700263#ifdef CONFIG_NET_POLL_CONTROLLER
264static void net_poll_controller(struct net_device *dev);
265#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266#if ALLOW_DMA
267static void get_dma_channel(struct net_device *dev);
268static void release_dma_buff(struct net_local *lp);
269#endif
270
271/* Example routines you must write ;->. */
272#define tx_done(dev) 1
273
274/*
275 * Permit 'cs89x0_dma=N' in the kernel boot environment
276 */
277#if !defined(MODULE) && (ALLOW_DMA != 0)
278static int g_cs89x0_dma;
279
280static int __init dma_fn(char *str)
281{
282 g_cs89x0_dma = simple_strtol(str,NULL,0);
283 return 1;
284}
285
286__setup("cs89x0_dma=", dma_fn);
287#endif /* !defined(MODULE) && (ALLOW_DMA != 0) */
288
289#ifndef MODULE
290static int g_cs89x0_media__force;
291
292static int __init media_fn(char *str)
293{
294 if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
295 else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
296 else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
297 return 1;
298}
299
300__setup("cs89x0_media=", media_fn);
301
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400302
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303/* Check for a network adaptor of this type, and return '0' iff one exists.
304 If dev->base_addr == 0, probe all likely locations.
305 If dev->base_addr == 1, always return failure.
306 If dev->base_addr == 2, allocate space for the device and return success
307 (detachable devices only).
308 Return 0 on success.
309 */
310
311struct net_device * __init cs89x0_probe(int unit)
312{
313 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
314 unsigned *port;
315 int err = 0;
316 int irq;
317 int io;
318
319 if (!dev)
320 return ERR_PTR(-ENODEV);
321
322 sprintf(dev->name, "eth%d", unit);
323 netdev_boot_setup_check(dev);
324 io = dev->base_addr;
325 irq = dev->irq;
326
327 if (net_debug)
328 printk("cs89x0:cs89x0_probe(0x%x)\n", io);
329
330 if (io > 0x1ff) { /* Check a single specified location. */
331 err = cs89x0_probe1(dev, io, 0);
332 } else if (io != 0) { /* Don't probe at all. */
333 err = -ENXIO;
334 } else {
335 for (port = netcard_portlist; *port; port++) {
336 if (cs89x0_probe1(dev, *port, 0) == 0)
337 break;
338 dev->irq = irq;
339 }
340 if (!*port)
341 err = -ENODEV;
342 }
343 if (err)
344 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346out:
347 free_netdev(dev);
348 printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
349 return ERR_PTR(err);
350}
351#endif
352
Deepak Saxena9c878962006-01-14 13:21:18 -0800353#if defined(CONFIG_MACH_IXDP2351)
354static u16
355readword(unsigned long base_addr, int portno)
356{
357 return __raw_readw(base_addr + (portno << 1));
358}
359
360static void
361writeword(unsigned long base_addr, int portno, u16 value)
362{
363 __raw_writew(value, base_addr + (portno << 1));
364}
365#elif defined(CONFIG_ARCH_IXDP2X01)
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800366static u16
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800367readword(unsigned long base_addr, int portno)
368{
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800369 return __raw_readl(base_addr + (portno << 1));
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800370}
371
372static void
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800373writeword(unsigned long base_addr, int portno, u16 value)
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800374{
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800375 __raw_writel(value, base_addr + (portno << 1));
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800376}
Lennert Buytenhek580d7b82006-01-14 13:21:16 -0800377#elif defined(CONFIG_ARCH_PNX010X)
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800378static u16
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800379readword(unsigned long base_addr, int portno)
380{
381 return inw(base_addr + (portno << 1));
382}
383
384static void
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800385writeword(unsigned long base_addr, int portno, u16 value)
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800386{
387 outw(value, base_addr + (portno << 1));
388}
389#else
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800390static u16
Lennert Buytenhek0d5affc2006-01-08 01:01:09 -0800391readword(unsigned long base_addr, int portno)
392{
393 return inw(base_addr + portno);
394}
395
396static void
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800397writeword(unsigned long base_addr, int portno, u16 value)
Lennert Buytenhek0d5affc2006-01-08 01:01:09 -0800398{
399 outw(value, base_addr + portno);
400}
Lennert Buytenhek3b68d702006-01-08 01:01:11 -0800401#endif
Lennert Buytenhek0d5affc2006-01-08 01:01:09 -0800402
Lennert Buytenhek084f7462006-01-08 01:01:12 -0800403static void
404readwords(unsigned long base_addr, int portno, void *buf, int length)
405{
406 u8 *buf8 = (u8 *)buf;
407
408 do {
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800409 u16 tmp16;
Lennert Buytenhek084f7462006-01-08 01:01:12 -0800410
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800411 tmp16 = readword(base_addr, portno);
412 *buf8++ = (u8)tmp16;
413 *buf8++ = (u8)(tmp16 >> 8);
Lennert Buytenhek084f7462006-01-08 01:01:12 -0800414 } while (--length);
415}
416
417static void
418writewords(unsigned long base_addr, int portno, void *buf, int length)
419{
420 u8 *buf8 = (u8 *)buf;
421
422 do {
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800423 u16 tmp16;
Lennert Buytenhek084f7462006-01-08 01:01:12 -0800424
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800425 tmp16 = *buf8++;
426 tmp16 |= (*buf8++) << 8;
427 writeword(base_addr, portno, tmp16);
Lennert Buytenhek084f7462006-01-08 01:01:12 -0800428 } while (--length);
429}
430
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800431static u16
432readreg(struct net_device *dev, u16 regno)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433{
Lennert Buytenhek3eaa5e72006-01-08 01:01:10 -0800434 writeword(dev->base_addr, ADD_PORT, regno);
435 return readword(dev->base_addr, DATA_PORT);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700436}
437
438static void
Lennert Buytenheka07f0db2006-01-14 13:21:17 -0800439writereg(struct net_device *dev, u16 regno, u16 value)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440{
Lennert Buytenhek3eaa5e72006-01-08 01:01:10 -0800441 writeword(dev->base_addr, ADD_PORT, regno);
442 writeword(dev->base_addr, DATA_PORT, value);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443}
444
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445static int __init
446wait_eeprom_ready(struct net_device *dev)
447{
448 int timeout = jiffies;
449 /* check to see if the EEPROM is ready, a timeout is used -
450 just in case EEPROM is ready when SI_BUSY in the
451 PP_SelfST is clear */
452 while(readreg(dev, PP_SelfST) & SI_BUSY)
453 if (jiffies - timeout >= 40)
454 return -1;
455 return 0;
456}
457
458static int __init
459get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
460{
461 int i;
462
463 if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len);
464 for (i = 0; i < len; i++) {
465 if (wait_eeprom_ready(dev) < 0) return -1;
466 /* Now send the EEPROM read command and EEPROM location to read */
467 writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
468 if (wait_eeprom_ready(dev) < 0) return -1;
469 buffer[i] = readreg(dev, PP_EEData);
470 if (net_debug > 3) printk("%04x ", buffer[i]);
471 }
472 if (net_debug > 3) printk("\n");
473 return 0;
474}
475
476static int __init
477get_eeprom_cksum(int off, int len, int *buffer)
478{
479 int i, cksum;
480
481 cksum = 0;
482 for (i = 0; i < len; i++)
483 cksum += buffer[i];
484 cksum &= 0xffff;
485 if (cksum == 0)
486 return 0;
487 return -1;
488}
489
Deepak Saxena6f519162005-09-09 13:02:07 -0700490#ifdef CONFIG_NET_POLL_CONTROLLER
491/*
492 * Polling receive - used by netconsole and other diagnostic tools
493 * to allow network i/o with interrupts disabled.
494 */
495static void net_poll_controller(struct net_device *dev)
496{
497 disable_irq(dev->irq);
David Howells7d12e782006-10-05 14:55:46 +0100498 net_interrupt(dev->irq, dev);
Deepak Saxena6f519162005-09-09 13:02:07 -0700499 enable_irq(dev->irq);
500}
501#endif
502
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503/* This is the real probe routine. Linux has a history of friendly device
504 probes on the ISA bus. A good device probes avoids doing writes, and
505 verifies that the correct device exists and functions.
506 Return 0 on success.
507 */
508
509static int __init
510cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
511{
512 struct net_local *lp = netdev_priv(dev);
513 static unsigned version_printed;
514 int i;
Denis Vlasenko01bdc032005-07-31 22:34:50 -0700515 int tmp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516 unsigned rev_type = 0;
517 int eeprom_buff[CHKSUM_LEN];
518 int retval;
Joe Perches0795af52007-10-03 17:59:30 -0700519 DECLARE_MAC_BUF(mac);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 /* Initialize the device structure. */
522 if (!modular) {
523 memset(lp, 0, sizeof(*lp));
524 spin_lock_init(&lp->lock);
525#ifndef MODULE
526#if ALLOW_DMA
527 if (g_cs89x0_dma) {
528 lp->use_dma = 1;
529 lp->dma = g_cs89x0_dma;
530 lp->dmasize = 16; /* Could make this an option... */
531 }
532#endif
533 lp->force = g_cs89x0_media__force;
534#endif
535 }
536
Lennert Buytenhek277cb102006-01-08 01:01:14 -0800537#ifdef CONFIG_ARCH_PNX010X
dmitry pervushin0dd3c782005-06-20 15:32:54 -0700538 initialize_ebi();
539
540 /* Map GPIO registers for the pins connected to the CS8900a. */
541 if (map_cirrus_gpio() < 0)
542 return -ENODEV;
543
544 reset_cirrus();
545
546 /* Map event-router registers. */
547 if (map_event_router() < 0)
548 return -ENODEV;
549
550 enable_cirrus_irq();
551
552 unmap_cirrus_gpio();
553 unmap_event_router();
554
555 dev->base_addr = ioaddr;
556
557 for (i = 0 ; i < 3 ; i++)
558 readreg(dev, 0);
559#endif
560
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 /* Grab the region so we can find another board if autoIRQ fails. */
562 /* WTF is going on here? */
563 if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
564 printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
565 DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
566 retval = -EBUSY;
567 goto out1;
568 }
569
570#ifdef CONFIG_SH_HICOSH4
571 /* truely reset the chip */
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800572 writeword(ioaddr, ADD_PORT, 0x0114);
573 writeword(ioaddr, DATA_PORT, 0x0040);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574#endif
575
576 /* if they give us an odd I/O address, then do ONE write to
577 the address port, to get it back to address zero, where we
578 expect to find the EISA signature word. An IO with a base of 0x3
579 will skip the test for the ADD_PORT. */
580 if (ioaddr & 1) {
581 if (net_debug > 1)
582 printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
583 if ((ioaddr & 2) != 2)
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800584 if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585 printk(KERN_ERR "%s: bad signature 0x%x\n",
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800586 dev->name, readword(ioaddr & ~3, ADD_PORT));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700587 retval = -ENODEV;
588 goto out2;
589 }
590 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591
592 ioaddr &= ~3;
George G. Davis9e1402a2006-11-16 14:50:14 -0500593 printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
594 ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800595 writeword(ioaddr, ADD_PORT, PP_ChipID);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700596
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800597 tmp = readword(ioaddr, DATA_PORT);
Denis Vlasenko01bdc032005-07-31 22:34:50 -0700598 if (tmp != CHIP_EISA_ID_SIG) {
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800599 printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
Denis Vlasenko01bdc032005-07-31 22:34:50 -0700600 CHIP_EISA_ID_SIG_STR "\n",
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800601 dev->name, ioaddr, DATA_PORT, tmp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700602 retval = -ENODEV;
603 goto out2;
604 }
605
606 /* Fill in the 'dev' fields. */
607 dev->base_addr = ioaddr;
608
609 /* get the chip type */
610 rev_type = readreg(dev, PRODUCT_ID_ADD);
611 lp->chip_type = rev_type &~ REVISON_BITS;
612 lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
613
614 /* Check the chip type and revision in order to set the correct send command
615 CS8920 revision C and CS8900 revision F can use the faster send. */
616 lp->send_cmd = TX_AFTER_381;
617 if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
618 lp->send_cmd = TX_NOW;
619 if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
620 lp->send_cmd = TX_NOW;
621
622 if (net_debug && version_printed++ == 0)
623 printk(version);
624
625 printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ",
626 dev->name,
627 lp->chip_type==CS8900?'0':'2',
628 lp->chip_type==CS8920M?"M":"",
629 lp->chip_revision,
630 dev->base_addr);
631
632 reset_chip(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400633
Linus Torvalds1da177e2005-04-16 15:20:36 -0700634 /* Here we read the current configuration of the chip. If there
635 is no Extended EEPROM then the idea is to not disturb the chip
636 configuration, it should have been correctly setup by automatic
637 EEPROM read on reset. So, if the chip says it read the EEPROM
638 the driver will always do *something* instead of complain that
639 adapter_cnf is 0. */
640
641#ifdef CONFIG_SH_HICOSH4
642 if (1) {
643 /* For the HiCO.SH4 board, things are different: we don't
644 have EEPROM, but there is some data in flash, so we go
645 get it there directly (MAC). */
646 __u16 *confd;
647 short cnt;
648 if (((* (volatile __u32 *) 0xa0013ff0) & 0x00ffffff)
649 == 0x006c3000) {
650 confd = (__u16*) 0xa0013fc0;
651 } else {
652 confd = (__u16*) 0xa001ffc0;
653 }
654 cnt = (*confd++ & 0x00ff) >> 1;
655 while (--cnt > 0) {
656 __u16 j = *confd++;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400657
Linus Torvalds1da177e2005-04-16 15:20:36 -0700658 switch (j & 0x0fff) {
659 case PP_IA:
660 for (i = 0; i < ETH_ALEN/2; i++) {
661 dev->dev_addr[i*2] = confd[i] & 0xFF;
662 dev->dev_addr[i*2+1] = confd[i] >> 8;
663 }
664 break;
665 }
666 j = (j >> 12) + 1;
667 confd += j;
668 cnt -= j;
669 }
670 } else
671#endif
672
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400673 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
Linus Torvalds1da177e2005-04-16 15:20:36 -0700674 (EEPROM_OK|EEPROM_PRESENT)) {
675 /* Load the MAC. */
676 for (i=0; i < ETH_ALEN/2; i++) {
677 unsigned int Addr;
678 Addr = readreg(dev, PP_IA+i*2);
679 dev->dev_addr[i*2] = Addr & 0xFF;
680 dev->dev_addr[i*2+1] = Addr >> 8;
681 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400682
683 /* Load the Adapter Configuration.
684 Note: Barring any more specific information from some
685 other source (ie EEPROM+Schematics), we would not know
686 how to operate a 10Base2 interface on the AUI port.
687 However, since we do read the status of HCB1 and use
688 settings that always result in calls to control_dc_dc(dev,0)
689 a BNC interface should work if the enable pin
690 (dc/dc converter) is on HCB1. It will be called AUI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700691 however. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400692
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 lp->adapter_cnf = 0;
694 i = readreg(dev, PP_LineCTL);
695 /* Preserve the setting of the HCB1 pin. */
696 if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
697 lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
698 /* Save the sqelch bit */
699 if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
700 lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
701 /* Check if the card is in 10Base-t only mode */
702 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
703 lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
704 /* Check if the card is in AUI only mode */
705 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
706 lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
707 /* Check if the card is in Auto mode. */
708 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400709 lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400711
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 if (net_debug > 1)
713 printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
714 dev->name, i, lp->adapter_cnf);
715
716 /* IRQ. Other chips already probe, see below. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400717 if (lp->chip_type == CS8900)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718 lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400719
Linus Torvalds1da177e2005-04-16 15:20:36 -0700720 printk( "[Cirrus EEPROM] ");
721 }
722
723 printk("\n");
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400724
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725 /* First check to see if an EEPROM is attached. */
726#ifdef CONFIG_SH_HICOSH4 /* no EEPROM on HiCO, don't hazzle with it here */
727 if (1) {
728 printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
729 } else
730#endif
731 if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
732 printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
733 else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
734 printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
735 } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
736 /* Check if the chip was able to read its own configuration starting
737 at 0 in the EEPROM*/
738 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400739 (EEPROM_OK|EEPROM_PRESENT))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700740 printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400741
Linus Torvalds1da177e2005-04-16 15:20:36 -0700742 } else {
743 /* This reads an extended EEPROM that is not documented
744 in the CS8900 datasheet. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400745
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746 /* get transmission control word but keep the autonegotiation bits */
747 if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
748 /* Store adapter configuration */
749 if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
750 /* Store ISA configuration */
751 lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
752 dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
753
754 /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
755 /* store the initial memory base address */
756 for (i = 0; i < ETH_ALEN/2; i++) {
757 dev->dev_addr[i*2] = eeprom_buff[i];
758 dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
759 }
760 if (net_debug > 1)
761 printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
762 dev->name, lp->adapter_cnf);
763 }
764
765 /* allow them to force multiple transceivers. If they force multiple, autosense */
766 {
767 int count = 0;
768 if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
769 if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
770 if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
771 if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
772 else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
773 else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
774 else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
775 }
776
777 if (net_debug > 1)
778 printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
779 dev->name, lp->force, lp->adapter_cnf);
780
781 /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
782
783 /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
784
785 /* FIXME: we don't set the Ethernet address on the command line. Use
786 ifconfig IFACE hw ether AABBCCDDEEFF */
787
788 printk(KERN_INFO "cs89x0 media %s%s%s",
789 (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"",
790 (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"",
791 (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":"");
792
793 lp->irq_map = 0xffff;
794
795 /* If this is a CS8900 then no pnp soft */
796 if (lp->chip_type != CS8900 &&
797 /* Check if the ISA IRQ has been set */
798 (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
799 (i != 0 && i < CS8920_NO_INTS))) {
800 if (!dev->irq)
801 dev->irq = i;
802 } else {
803 i = lp->isa_config & INT_NO_MASK;
804 if (lp->chip_type == CS8900) {
Deepak Saxena9c878962006-01-14 13:21:18 -0800805#if defined(CONFIG_MACH_IXDP2351) || defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 i = cs8900_irq_map[0];
807#else
808 /* Translate the IRQ using the IRQ mapping table. */
Denis Chengff8ac602007-09-02 18:30:18 +0800809 if (i >= ARRAY_SIZE(cs8900_irq_map))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810 printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
811 else
812 i = cs8900_irq_map[i];
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400813
Linus Torvalds1da177e2005-04-16 15:20:36 -0700814 lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
815 } else {
816 int irq_map_buff[IRQ_MAP_LEN/2];
817
818 if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
819 IRQ_MAP_LEN/2,
820 irq_map_buff) >= 0) {
821 if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
822 lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
823 }
824#endif
825 }
826 if (!dev->irq)
827 dev->irq = i;
828 }
829
830 printk(" IRQ %d", dev->irq);
831
832#if ALLOW_DMA
833 if (lp->use_dma) {
834 get_dma_channel(dev);
835 printk(", DMA %d", dev->dma);
836 }
837 else
838#endif
839 {
840 printk(", programmed I/O");
841 }
842
843 /* print the ethernet address. */
Joe Perches0795af52007-10-03 17:59:30 -0700844 printk(", MAC %s", print_mac(mac, dev->dev_addr));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700845
846 dev->open = net_open;
847 dev->stop = net_close;
848 dev->tx_timeout = net_timeout;
849 dev->watchdog_timeo = HZ;
850 dev->hard_start_xmit = net_send_packet;
851 dev->get_stats = net_get_stats;
852 dev->set_multicast_list = set_multicast_list;
853 dev->set_mac_address = set_mac_address;
Deepak Saxena6f519162005-09-09 13:02:07 -0700854#ifdef CONFIG_NET_POLL_CONTROLLER
855 dev->poll_controller = net_poll_controller;
856#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700857
858 printk("\n");
859 if (net_debug)
860 printk("cs89x0_probe1() successful\n");
b1fc5502005-05-12 20:11:55 -0400861
862 retval = register_netdev(dev);
863 if (retval)
864 goto out3;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700865 return 0;
b1fc5502005-05-12 20:11:55 -0400866out3:
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -0800867 writeword(dev->base_addr, ADD_PORT, PP_ChipID);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700868out2:
869 release_region(ioaddr & ~3, NETCARD_IO_EXTENT);
870out1:
871 return retval;
872}
873
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400874
Linus Torvalds1da177e2005-04-16 15:20:36 -0700875/*********************************
876 * This page contains DMA routines
877**********************************/
878
879#if ALLOW_DMA
880
881#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
882
883static void
884get_dma_channel(struct net_device *dev)
885{
886 struct net_local *lp = netdev_priv(dev);
887
888 if (lp->dma) {
889 dev->dma = lp->dma;
890 lp->isa_config |= ISA_RxDMA;
891 } else {
892 if ((lp->isa_config & ANY_ISA_DMA) == 0)
893 return;
894 dev->dma = lp->isa_config & DMA_NO_MASK;
895 if (lp->chip_type == CS8900)
896 dev->dma += 5;
897 if (dev->dma < 5 || dev->dma > 7) {
898 lp->isa_config &= ~ANY_ISA_DMA;
899 return;
900 }
901 }
902 return;
903}
904
905static void
906write_dma(struct net_device *dev, int chip_type, int dma)
907{
908 struct net_local *lp = netdev_priv(dev);
909 if ((lp->isa_config & ANY_ISA_DMA) == 0)
910 return;
911 if (chip_type == CS8900) {
912 writereg(dev, PP_CS8900_ISADMA, dma-5);
913 } else {
914 writereg(dev, PP_CS8920_ISADMA, dma);
915 }
916}
917
918static void
919set_dma_cfg(struct net_device *dev)
920{
921 struct net_local *lp = netdev_priv(dev);
922
923 if (lp->use_dma) {
924 if ((lp->isa_config & ANY_ISA_DMA) == 0) {
925 if (net_debug > 3)
926 printk("set_dma_cfg(): no DMA\n");
927 return;
928 }
929 if (lp->isa_config & ISA_RxDMA) {
930 lp->curr_rx_cfg |= RX_DMA_ONLY;
931 if (net_debug > 3)
932 printk("set_dma_cfg(): RX_DMA_ONLY\n");
933 } else {
934 lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
935 if (net_debug > 3)
936 printk("set_dma_cfg(): AUTO_RX_DMA\n");
937 }
938 }
939}
940
941static int
942dma_bufcfg(struct net_device *dev)
943{
944 struct net_local *lp = netdev_priv(dev);
945 if (lp->use_dma)
946 return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0;
947 else
948 return 0;
949}
950
951static int
952dma_busctl(struct net_device *dev)
953{
954 int retval = 0;
955 struct net_local *lp = netdev_priv(dev);
956 if (lp->use_dma) {
957 if (lp->isa_config & ANY_ISA_DMA)
958 retval |= RESET_RX_DMA; /* Reset the DMA pointer */
959 if (lp->isa_config & DMA_BURST)
960 retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
961 if (lp->dmasize == 64)
962 retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
963 retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
964 }
965 return retval;
966}
967
968static void
969dma_rx(struct net_device *dev)
970{
971 struct net_local *lp = netdev_priv(dev);
972 struct sk_buff *skb;
973 int status, length;
974 unsigned char *bp = lp->rx_dma_ptr;
975
976 status = bp[0] + (bp[1]<<8);
977 length = bp[2] + (bp[3]<<8);
978 bp += 4;
979 if (net_debug > 5) {
980 printk( "%s: receiving DMA packet at %lx, status %x, length %x\n",
981 dev->name, (unsigned long)bp, status, length);
982 }
983 if ((status & RX_OK) == 0) {
984 count_rx_errors(status, lp);
985 goto skip_this_frame;
986 }
987
988 /* Malloc up new buffer. */
989 skb = dev_alloc_skb(length + 2);
990 if (skb == NULL) {
991 if (net_debug) /* I don't think we want to do this to a stressed system */
992 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
993 lp->stats.rx_dropped++;
994
995 /* AKPM: advance bp to the next frame */
996skip_this_frame:
997 bp += (length + 3) & ~3;
998 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
999 lp->rx_dma_ptr = bp;
1000 return;
1001 }
1002 skb_reserve(skb, 2); /* longword align L3 header */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001003
1004 if (bp + length > lp->end_dma_buff) {
1005 int semi_cnt = lp->end_dma_buff - bp;
1006 memcpy(skb_put(skb,semi_cnt), bp, semi_cnt);
1007 memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff,
1008 length - semi_cnt);
1009 } else {
1010 memcpy(skb_put(skb,length), bp, length);
1011 }
1012 bp += (length + 3) & ~3;
1013 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
1014 lp->rx_dma_ptr = bp;
1015
1016 if (net_debug > 3) {
1017 printk( "%s: received %d byte DMA packet of type %x\n",
1018 dev->name, length,
1019 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1020 }
1021 skb->protocol=eth_type_trans(skb,dev);
1022 netif_rx(skb);
1023 dev->last_rx = jiffies;
1024 lp->stats.rx_packets++;
1025 lp->stats.rx_bytes += length;
1026}
1027
1028#endif /* ALLOW_DMA */
1029
1030void __init reset_chip(struct net_device *dev)
1031{
Deepak Saxena9c878962006-01-14 13:21:18 -08001032#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001033 struct net_local *lp = netdev_priv(dev);
1034 int ioaddr = dev->base_addr;
1035#endif
1036 int reset_start_time;
1037
1038 writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
1039
1040 /* wait 30 ms */
1041 msleep(30);
1042
Deepak Saxena9c878962006-01-14 13:21:18 -08001043#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044 if (lp->chip_type != CS8900) {
1045 /* Hardware problem requires PNP registers to be reconfigured after a reset */
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -08001046 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001047 outb(dev->irq, ioaddr + DATA_PORT);
1048 outb(0, ioaddr + DATA_PORT + 1);
1049
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -08001050 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051 outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
1052 outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1);
1053 }
1054#endif /* IXDP2x01 */
1055
1056 /* Wait until the chip is reset */
1057 reset_start_time = jiffies;
1058 while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
1059 ;
1060}
1061
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001062
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063static void
1064control_dc_dc(struct net_device *dev, int on_not_off)
1065{
1066 struct net_local *lp = netdev_priv(dev);
1067 unsigned int selfcontrol;
1068 int timenow = jiffies;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001069 /* control the DC to DC convertor in the SelfControl register.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070 Note: This is hooked up to a general purpose pin, might not
1071 always be a DC to DC convertor. */
1072
1073 selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
1074 if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
1075 selfcontrol |= HCB1;
1076 else
1077 selfcontrol &= ~HCB1;
1078 writereg(dev, PP_SelfCTL, selfcontrol);
1079
1080 /* Wait for the DC/DC converter to power up - 500ms */
1081 while (jiffies - timenow < HZ)
1082 ;
1083}
1084
1085#define DETECTED_NONE 0
1086#define DETECTED_RJ45H 1
1087#define DETECTED_RJ45F 2
1088#define DETECTED_AUI 3
1089#define DETECTED_BNC 4
1090
1091static int
1092detect_tp(struct net_device *dev)
1093{
1094 struct net_local *lp = netdev_priv(dev);
1095 int timenow = jiffies;
1096 int fdx;
1097
1098 if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
1099
1100 /* If connected to another full duplex capable 10-Base-T card the link pulses
1101 seem to be lost when the auto detect bit in the LineCTL is set.
1102 To overcome this the auto detect bit will be cleared whilst testing the
1103 10-Base-T interface. This would not be necessary for the sparrow chip but
1104 is simpler to do it anyway. */
1105 writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY);
1106 control_dc_dc(dev, 0);
1107
1108 /* Delay for the hardware to work out if the TP cable is present - 150ms */
1109 for (timenow = jiffies; jiffies - timenow < 15; )
1110 ;
1111 if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
1112 return DETECTED_NONE;
1113
1114 if (lp->chip_type == CS8900) {
1115 switch (lp->force & 0xf0) {
1116#if 0
1117 case FORCE_AUTO:
1118 printk("%s: cs8900 doesn't autonegotiate\n",dev->name);
1119 return DETECTED_NONE;
1120#endif
1121 /* CS8900 doesn't support AUTO, change to HALF*/
1122 case FORCE_AUTO:
1123 lp->force &= ~FORCE_AUTO;
1124 lp->force |= FORCE_HALF;
1125 break;
1126 case FORCE_HALF:
1127 break;
1128 case FORCE_FULL:
1129 writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
1130 break;
1131 }
1132 fdx = readreg(dev, PP_TestCTL) & FDX_8900;
1133 } else {
1134 switch (lp->force & 0xf0) {
1135 case FORCE_AUTO:
1136 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1137 break;
1138 case FORCE_HALF:
1139 lp->auto_neg_cnf = 0;
1140 break;
1141 case FORCE_FULL:
1142 lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
1143 break;
1144 }
1145
1146 writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
1147
1148 if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
1149 printk(KERN_INFO "%s: negotiating duplex...\n",dev->name);
1150 while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
1151 if (jiffies - timenow > 4000) {
1152 printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
1153 break;
1154 }
1155 }
1156 }
1157 fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
1158 }
1159 if (fdx)
1160 return DETECTED_RJ45F;
1161 else
1162 return DETECTED_RJ45H;
1163}
1164
1165/* send a test packet - return true if carrier bits are ok */
1166static int
1167send_test_pkt(struct net_device *dev)
1168{
1169 char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
1170 0, 46, /* A 46 in network order */
1171 0, 0, /* DSAP=0 & SSAP=0 fields */
1172 0xf3, 0 /* Control (Test Req + P bit set) */ };
1173 long timenow = jiffies;
1174
1175 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
1176
1177 memcpy(test_packet, dev->dev_addr, ETH_ALEN);
1178 memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
1179
Lennert Buytenhek974dffc2006-01-08 01:01:06 -08001180 writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL);
1181 writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182
1183 /* Test to see if the chip has allocated memory for the packet */
1184 while (jiffies - timenow < 5)
1185 if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
1186 break;
1187 if (jiffies - timenow >= 5)
1188 return 0; /* this shouldn't happen */
1189
1190 /* Write the contents of the packet */
Lennert Buytenhek084f7462006-01-08 01:01:12 -08001191 writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192
1193 if (net_debug > 1) printk("Sending test packet ");
1194 /* wait a couple of jiffies for packet to be received */
1195 for (timenow = jiffies; jiffies - timenow < 3; )
1196 ;
1197 if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
1198 if (net_debug > 1) printk("succeeded\n");
1199 return 1;
1200 }
1201 if (net_debug > 1) printk("failed\n");
1202 return 0;
1203}
1204
1205
1206static int
1207detect_aui(struct net_device *dev)
1208{
1209 struct net_local *lp = netdev_priv(dev);
1210
1211 if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
1212 control_dc_dc(dev, 0);
1213
1214 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1215
1216 if (send_test_pkt(dev))
1217 return DETECTED_AUI;
1218 else
1219 return DETECTED_NONE;
1220}
1221
1222static int
1223detect_bnc(struct net_device *dev)
1224{
1225 struct net_local *lp = netdev_priv(dev);
1226
1227 if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
1228 control_dc_dc(dev, 1);
1229
1230 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1231
1232 if (send_test_pkt(dev))
1233 return DETECTED_BNC;
1234 else
1235 return DETECTED_NONE;
1236}
1237
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001238
Linus Torvalds1da177e2005-04-16 15:20:36 -07001239static void
1240write_irq(struct net_device *dev, int chip_type, int irq)
1241{
1242 int i;
1243
1244 if (chip_type == CS8900) {
1245 /* Search the mapping table for the corresponding IRQ pin. */
Denis Chengff8ac602007-09-02 18:30:18 +08001246 for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001247 if (cs8900_irq_map[i] == irq)
1248 break;
1249 /* Not found */
Denis Chengff8ac602007-09-02 18:30:18 +08001250 if (i == ARRAY_SIZE(cs8900_irq_map))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251 i = 3;
1252 writereg(dev, PP_CS8900_ISAINT, i);
1253 } else {
1254 writereg(dev, PP_CS8920_ISAINT, irq);
1255 }
1256}
1257
1258/* Open/initialize the board. This is called (in the current kernel)
1259 sometime after booting when the 'ifconfig' program is run.
1260
1261 This routine should set everything up anew at each open, even
1262 registers that "should" only need to be set once at boot, so that
1263 there is non-reboot way to recover if something goes wrong.
1264 */
1265
1266/* AKPM: do we need to do any locking here? */
1267
1268static int
1269net_open(struct net_device *dev)
1270{
1271 struct net_local *lp = netdev_priv(dev);
1272 int result = 0;
1273 int i;
1274 int ret;
1275
Lennert Buytenhek277cb102006-01-08 01:01:14 -08001276#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX010X) /* uses irq#1, so this won't work */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277 if (dev->irq < 2) {
1278 /* Allow interrupts to be generated by the chip */
1279/* Cirrus' release had this: */
1280#if 0
1281 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1282#endif
1283/* And 2.3.47 had this: */
1284 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1285
1286 for (i = 2; i < CS8920_NO_INTS; i++) {
1287 if ((1 << i) & lp->irq_map) {
1288 if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
1289 dev->irq = i;
1290 write_irq(dev, lp->chip_type, i);
1291 /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
1292 break;
1293 }
1294 }
1295 }
1296
1297 if (i >= CS8920_NO_INTS) {
1298 writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
1299 printk(KERN_ERR "cs89x0: can't get an interrupt\n");
1300 ret = -EAGAIN;
1301 goto bad_out;
1302 }
1303 }
1304 else
1305#endif
1306 {
Deepak Saxena9c878962006-01-14 13:21:18 -08001307#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308 if (((1 << dev->irq) & lp->irq_map) == 0) {
1309 printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
1310 dev->name, dev->irq, lp->irq_map);
1311 ret = -EAGAIN;
1312 goto bad_out;
1313 }
1314#endif
1315/* FIXME: Cirrus' release had this: */
1316 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1317/* And 2.3.47 had this: */
1318#if 0
1319 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1320#endif
1321 write_irq(dev, lp->chip_type, dev->irq);
1322 ret = request_irq(dev->irq, &net_interrupt, 0, dev->name, dev);
1323 if (ret) {
1324 if (net_debug)
1325 printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
1326 goto bad_out;
1327 }
1328 }
1329
1330#if ALLOW_DMA
1331 if (lp->use_dma) {
1332 if (lp->isa_config & ANY_ISA_DMA) {
1333 unsigned long flags;
1334 lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
1335 get_order(lp->dmasize * 1024));
1336
1337 if (!lp->dma_buff) {
1338 printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
1339 goto release_irq;
1340 }
1341 if (net_debug > 1) {
1342 printk( "%s: dma %lx %lx\n",
1343 dev->name,
1344 (unsigned long)lp->dma_buff,
1345 (unsigned long)isa_virt_to_bus(lp->dma_buff));
1346 }
1347 if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
1348 !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
1349 printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
1350 goto release_irq;
1351 }
1352 memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
1353 if (request_dma(dev->dma, dev->name)) {
1354 printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
1355 goto release_irq;
1356 }
1357 write_dma(dev, lp->chip_type, dev->dma);
1358 lp->rx_dma_ptr = lp->dma_buff;
1359 lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
1360 spin_lock_irqsave(&lp->lock, flags);
1361 disable_dma(dev->dma);
1362 clear_dma_ff(dev->dma);
1363 set_dma_mode(dev->dma, 0x14); /* auto_init as well */
1364 set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
1365 set_dma_count(dev->dma, lp->dmasize*1024);
1366 enable_dma(dev->dma);
1367 spin_unlock_irqrestore(&lp->lock, flags);
1368 }
1369 }
1370#endif /* ALLOW_DMA */
1371
1372 /* set the Ethernet address */
1373 for (i=0; i < ETH_ALEN/2; i++)
1374 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1375
1376 /* while we're testing the interface, leave interrupts disabled */
1377 writereg(dev, PP_BusCTL, MEMORY_ON);
1378
1379 /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
1380 if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
1381 lp->linectl = LOW_RX_SQUELCH;
1382 else
1383 lp->linectl = 0;
1384
1385 /* check to make sure that they have the "right" hardware available */
1386 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1387 case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
1388 case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
1389 case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
1390 default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
1391 }
Lennert Buytenhek277cb102006-01-08 01:01:14 -08001392#ifdef CONFIG_ARCH_PNX010X
dmitry pervushin0dd3c782005-06-20 15:32:54 -07001393 result = A_CNF_10B_T;
1394#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395 if (!result) {
1396 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
Wang Chen17a94402008-05-30 11:18:55 +08001397release_dma:
1398#if ALLOW_DMA
1399 free_dma(dev->dma);
1400#endif
1401release_irq:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001402#if ALLOW_DMA
1403 release_dma_buff(lp);
1404#endif
1405 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
1406 free_irq(dev->irq, dev);
1407 ret = -EAGAIN;
1408 goto bad_out;
1409 }
1410
1411 /* set the hardware to the configured choice */
1412 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1413 case A_CNF_MEDIA_10B_T:
1414 result = detect_tp(dev);
1415 if (result==DETECTED_NONE) {
1416 printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
1417 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1418 result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
1419 }
1420 break;
1421 case A_CNF_MEDIA_AUI:
1422 result = detect_aui(dev);
1423 if (result==DETECTED_NONE) {
1424 printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
1425 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1426 result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
1427 }
1428 break;
1429 case A_CNF_MEDIA_10B_2:
1430 result = detect_bnc(dev);
1431 if (result==DETECTED_NONE) {
1432 printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
1433 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1434 result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
1435 }
1436 break;
1437 case A_CNF_MEDIA_AUTO:
1438 writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
1439 if (lp->adapter_cnf & A_CNF_10B_T)
1440 if ((result = detect_tp(dev)) != DETECTED_NONE)
1441 break;
1442 if (lp->adapter_cnf & A_CNF_AUI)
1443 if ((result = detect_aui(dev)) != DETECTED_NONE)
1444 break;
1445 if (lp->adapter_cnf & A_CNF_10B_2)
1446 if ((result = detect_bnc(dev)) != DETECTED_NONE)
1447 break;
1448 printk(KERN_ERR "%s: no media detected\n", dev->name);
Wang Chen17a94402008-05-30 11:18:55 +08001449 goto release_dma;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450 }
1451 switch(result) {
1452 case DETECTED_NONE:
1453 printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
Wang Chen17a94402008-05-30 11:18:55 +08001454 goto release_dma;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455 case DETECTED_RJ45H:
1456 printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
1457 break;
1458 case DETECTED_RJ45F:
1459 printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
1460 break;
1461 case DETECTED_AUI:
1462 printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
1463 break;
1464 case DETECTED_BNC:
1465 printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
1466 break;
1467 }
1468
1469 /* Turn on both receive and transmit operations */
1470 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
1471
1472 /* Receive only error free packets addressed to this card */
1473 lp->rx_mode = 0;
1474 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
1475
1476 lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
1477
1478 if (lp->isa_config & STREAM_TRANSFER)
1479 lp->curr_rx_cfg |= RX_STREAM_ENBL;
1480#if ALLOW_DMA
1481 set_dma_cfg(dev);
1482#endif
1483 writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
1484
1485 writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
1486 TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
1487
1488 writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
1489#if ALLOW_DMA
1490 dma_bufcfg(dev) |
1491#endif
1492 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
1493
1494 /* now that we've got our act together, enable everything */
1495 writereg(dev, PP_BusCTL, ENABLE_IRQ
1496 | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */
1497#if ALLOW_DMA
1498 | dma_busctl(dev)
1499#endif
1500 );
1501 netif_start_queue(dev);
1502 if (net_debug > 1)
1503 printk("cs89x0: net_open() succeeded\n");
1504 return 0;
1505bad_out:
1506 return ret;
1507}
1508
1509static void net_timeout(struct net_device *dev)
1510{
1511 /* If we get here, some higher level has decided we are broken.
1512 There should really be a "kick me" function call instead. */
1513 if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
1514 tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
1515 /* Try to restart the adaptor. */
1516 netif_wake_queue(dev);
1517}
1518
1519static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
1520{
1521 struct net_local *lp = netdev_priv(dev);
1522
1523 if (net_debug > 3) {
1524 printk("%s: sent %d byte packet of type %x\n",
1525 dev->name, skb->len,
1526 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1527 }
1528
1529 /* keep the upload from being interrupted, since we
1530 ask the chip to start transmitting before the
1531 whole packet has been completely uploaded. */
1532
1533 spin_lock_irq(&lp->lock);
1534 netif_stop_queue(dev);
1535
1536 /* initiate a transmit sequence */
Lennert Buytenhek974dffc2006-01-08 01:01:06 -08001537 writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd);
1538 writeword(dev->base_addr, TX_LEN_PORT, skb->len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001539
1540 /* Test to see if the chip has allocated memory for the packet */
1541 if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
1542 /*
1543 * Gasp! It hasn't. But that shouldn't happen since
1544 * we're waiting for TxOk, so return 1 and requeue this packet.
1545 */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001546
Linus Torvalds1da177e2005-04-16 15:20:36 -07001547 spin_unlock_irq(&lp->lock);
1548 if (net_debug) printk("cs89x0: Tx buffer not free!\n");
1549 return 1;
1550 }
1551 /* Write the contents of the packet */
Lennert Buytenhek084f7462006-01-08 01:01:12 -08001552 writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553 spin_unlock_irq(&lp->lock);
Ian Campbelle1699f52005-07-28 01:07:34 -07001554 lp->stats.tx_bytes += skb->len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001555 dev->trans_start = jiffies;
1556 dev_kfree_skb (skb);
1557
1558 /*
1559 * We DO NOT call netif_wake_queue() here.
1560 * We also DO NOT call netif_start_queue().
1561 *
1562 * Either of these would cause another bottom half run through
1563 * net_send_packet() before this packet has fully gone out. That causes
1564 * us to hit the "Gasp!" above and the send is rescheduled. it runs like
1565 * a dog. We just return and wait for the Tx completion interrupt handler
1566 * to restart the netdevice layer
1567 */
1568
1569 return 0;
1570}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001571
Linus Torvalds1da177e2005-04-16 15:20:36 -07001572/* The typical workload of the driver:
1573 Handle the network interface interrupts. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001574
David Howells7d12e782006-10-05 14:55:46 +01001575static irqreturn_t net_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001576{
1577 struct net_device *dev = dev_id;
1578 struct net_local *lp;
1579 int ioaddr, status;
1580 int handled = 0;
1581
1582 ioaddr = dev->base_addr;
1583 lp = netdev_priv(dev);
1584
1585 /* we MUST read all the events out of the ISQ, otherwise we'll never
1586 get interrupted again. As a consequence, we can't have any limit
1587 on the number of times we loop in the interrupt handler. The
1588 hardware guarantees that eventually we'll run out of events. Of
1589 course, if you're on a slow machine, and packets are arriving
1590 faster than you can read them off, you're screwed. Hasta la
1591 vista, baby! */
Lennert Buytenhek974dffc2006-01-08 01:01:06 -08001592 while ((status = readword(dev->base_addr, ISQ_PORT))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001593 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
1594 handled = 1;
1595 switch(status & ISQ_EVENT_MASK) {
1596 case ISQ_RECEIVER_EVENT:
1597 /* Got a packet(s). */
1598 net_rx(dev);
1599 break;
1600 case ISQ_TRANSMITTER_EVENT:
1601 lp->stats.tx_packets++;
1602 netif_wake_queue(dev); /* Inform upper layers. */
1603 if ((status & ( TX_OK |
1604 TX_LOST_CRS |
1605 TX_SQE_ERROR |
1606 TX_LATE_COL |
1607 TX_16_COL)) != TX_OK) {
1608 if ((status & TX_OK) == 0) lp->stats.tx_errors++;
1609 if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
1610 if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
1611 if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
1612 if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
1613 }
1614 break;
1615 case ISQ_BUFFER_EVENT:
1616 if (status & READY_FOR_TX) {
1617 /* we tried to transmit a packet earlier,
1618 but inexplicably ran out of buffers.
1619 That shouldn't happen since we only ever
1620 load one packet. Shrug. Do the right
1621 thing anyway. */
1622 netif_wake_queue(dev); /* Inform upper layers. */
1623 }
1624 if (status & TX_UNDERRUN) {
1625 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
1626 lp->send_underrun++;
1627 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
1628 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
1629 /* transmit cycle is done, although
1630 frame wasn't transmitted - this
1631 avoids having to wait for the upper
1632 layers to timeout on us, in the
1633 event of a tx underrun */
1634 netif_wake_queue(dev); /* Inform upper layers. */
1635 }
1636#if ALLOW_DMA
1637 if (lp->use_dma && (status & RX_DMA)) {
1638 int count = readreg(dev, PP_DmaFrameCnt);
1639 while(count) {
1640 if (net_debug > 5)
1641 printk("%s: receiving %d DMA frames\n", dev->name, count);
1642 if (net_debug > 2 && count >1)
1643 printk("%s: receiving %d DMA frames\n", dev->name, count);
1644 dma_rx(dev);
1645 if (--count == 0)
1646 count = readreg(dev, PP_DmaFrameCnt);
1647 if (net_debug > 2 && count > 0)
1648 printk("%s: continuing with %d DMA frames\n", dev->name, count);
1649 }
1650 }
1651#endif
1652 break;
1653 case ISQ_RX_MISS_EVENT:
1654 lp->stats.rx_missed_errors += (status >>6);
1655 break;
1656 case ISQ_TX_COL_EVENT:
1657 lp->stats.collisions += (status >>6);
1658 break;
1659 }
1660 }
1661 return IRQ_RETVAL(handled);
1662}
1663
1664static void
1665count_rx_errors(int status, struct net_local *lp)
1666{
1667 lp->stats.rx_errors++;
1668 if (status & RX_RUNT) lp->stats.rx_length_errors++;
1669 if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
1670 if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
1671 /* per str 172 */
1672 lp->stats.rx_crc_errors++;
1673 if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
1674 return;
1675}
1676
1677/* We have a good packet(s), get it/them out of the buffers. */
1678static void
1679net_rx(struct net_device *dev)
1680{
1681 struct net_local *lp = netdev_priv(dev);
1682 struct sk_buff *skb;
1683 int status, length;
1684
1685 int ioaddr = dev->base_addr;
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -08001686 status = readword(ioaddr, RX_FRAME_PORT);
1687 length = readword(ioaddr, RX_FRAME_PORT);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001688
1689 if ((status & RX_OK) == 0) {
1690 count_rx_errors(status, lp);
1691 return;
1692 }
1693
1694 /* Malloc up new buffer. */
1695 skb = dev_alloc_skb(length + 2);
1696 if (skb == NULL) {
1697#if 0 /* Again, this seems a cruel thing to do */
1698 printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
1699#endif
1700 lp->stats.rx_dropped++;
1701 return;
1702 }
1703 skb_reserve(skb, 2); /* longword align L3 header */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001704
Lennert Buytenhek084f7462006-01-08 01:01:12 -08001705 readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001706 if (length & 1)
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -08001707 skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001708
1709 if (net_debug > 3) {
1710 printk( "%s: received %d byte packet of type %x\n",
1711 dev->name, length,
1712 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1713 }
1714
1715 skb->protocol=eth_type_trans(skb,dev);
1716 netif_rx(skb);
1717 dev->last_rx = jiffies;
1718 lp->stats.rx_packets++;
1719 lp->stats.rx_bytes += length;
1720}
1721
1722#if ALLOW_DMA
1723static void release_dma_buff(struct net_local *lp)
1724{
1725 if (lp->dma_buff) {
1726 free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
1727 lp->dma_buff = NULL;
1728 }
1729}
1730#endif
1731
1732/* The inverse routine to net_open(). */
1733static int
1734net_close(struct net_device *dev)
1735{
1736#if ALLOW_DMA
1737 struct net_local *lp = netdev_priv(dev);
1738#endif
1739
1740 netif_stop_queue(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001741
Linus Torvalds1da177e2005-04-16 15:20:36 -07001742 writereg(dev, PP_RxCFG, 0);
1743 writereg(dev, PP_TxCFG, 0);
1744 writereg(dev, PP_BufCFG, 0);
1745 writereg(dev, PP_BusCTL, 0);
1746
1747 free_irq(dev->irq, dev);
1748
1749#if ALLOW_DMA
1750 if (lp->use_dma && lp->dma) {
1751 free_dma(dev->dma);
1752 release_dma_buff(lp);
1753 }
1754#endif
1755
1756 /* Update the statistics here. */
1757 return 0;
1758}
1759
1760/* Get the current statistics. This may be called with the card open or
1761 closed. */
1762static struct net_device_stats *
1763net_get_stats(struct net_device *dev)
1764{
1765 struct net_local *lp = netdev_priv(dev);
1766 unsigned long flags;
1767
1768 spin_lock_irqsave(&lp->lock, flags);
1769 /* Update the statistics from the device registers. */
1770 lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
1771 lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
1772 spin_unlock_irqrestore(&lp->lock, flags);
1773
1774 return &lp->stats;
1775}
1776
1777static void set_multicast_list(struct net_device *dev)
1778{
1779 struct net_local *lp = netdev_priv(dev);
1780 unsigned long flags;
1781
1782 spin_lock_irqsave(&lp->lock, flags);
1783 if(dev->flags&IFF_PROMISC)
1784 {
1785 lp->rx_mode = RX_ALL_ACCEPT;
1786 }
1787 else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
1788 {
1789 /* The multicast-accept list is initialized to accept-all, and we
1790 rely on higher-level filtering for now. */
1791 lp->rx_mode = RX_MULTCAST_ACCEPT;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001792 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793 else
1794 lp->rx_mode = 0;
1795
1796 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
1797
1798 /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
1799 writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
1800 (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
1801 spin_unlock_irqrestore(&lp->lock, flags);
1802}
1803
1804
1805static int set_mac_address(struct net_device *dev, void *p)
1806{
1807 int i;
1808 struct sockaddr *addr = p;
1809
Linus Torvalds1da177e2005-04-16 15:20:36 -07001810 if (netif_running(dev))
1811 return -EBUSY;
1812
1813 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1814
1815 if (net_debug) {
Joe Perches0795af52007-10-03 17:59:30 -07001816 DECLARE_MAC_BUF(mac);
1817 printk("%s: Setting MAC address to %s.\n",
1818 dev->name, print_mac(mac, dev->dev_addr));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001819 }
1820 /* set the Ethernet address */
1821 for (i=0; i < ETH_ALEN/2; i++)
1822 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1823
1824 return 0;
1825}
1826
1827#ifdef MODULE
1828
1829static struct net_device *dev_cs89x0;
1830
1831/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001832 * Support the 'debug' module parm even if we're compiled for non-debug to
1833 * avoid breaking someone's startup scripts
Linus Torvalds1da177e2005-04-16 15:20:36 -07001834 */
1835
1836static int io;
1837static int irq;
1838static int debug;
1839static char media[8];
1840static int duplex=-1;
1841
1842static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
1843static int dma;
1844static int dmasize=16; /* or 64 */
1845
1846module_param(io, int, 0);
1847module_param(irq, int, 0);
1848module_param(debug, int, 0);
1849module_param_string(media, media, sizeof(media), 0);
1850module_param(duplex, int, 0);
1851module_param(dma , int, 0);
1852module_param(dmasize , int, 0);
1853module_param(use_dma , int, 0);
1854MODULE_PARM_DESC(io, "cs89x0 I/O base address");
1855MODULE_PARM_DESC(irq, "cs89x0 IRQ number");
1856#if DEBUGGING
1857MODULE_PARM_DESC(debug, "cs89x0 debug level (0-6)");
1858#else
1859MODULE_PARM_DESC(debug, "(ignored)");
1860#endif
1861MODULE_PARM_DESC(media, "Set cs89x0 adapter(s) media type(s) (rj45,bnc,aui)");
1862/* No other value than -1 for duplex seems to be currently interpreted */
1863MODULE_PARM_DESC(duplex, "(ignored)");
1864#if ALLOW_DMA
1865MODULE_PARM_DESC(dma , "cs89x0 ISA DMA channel; ignored if use_dma=0");
1866MODULE_PARM_DESC(dmasize , "cs89x0 DMA size in kB (16,64); ignored if use_dma=0");
1867MODULE_PARM_DESC(use_dma , "cs89x0 using DMA (0-1)");
1868#else
1869MODULE_PARM_DESC(dma , "(ignored)");
1870MODULE_PARM_DESC(dmasize , "(ignored)");
1871MODULE_PARM_DESC(use_dma , "(ignored)");
1872#endif
1873
1874MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>");
1875MODULE_LICENSE("GPL");
1876
1877
1878/*
1879* media=t - specify media type
1880 or media=2
1881 or media=aui
1882 or medai=auto
1883* duplex=0 - specify forced half/full/autonegotiate duplex
1884* debug=# - debug level
1885
1886
1887* Default Chip Configuration:
1888 * DMA Burst = enabled
1889 * IOCHRDY Enabled = enabled
1890 * UseSA = enabled
1891 * CS8900 defaults to half-duplex if not specified on command-line
1892 * CS8920 defaults to autoneg if not specified on command-line
1893 * Use reset defaults for other config parameters
1894
1895* Assumptions:
1896 * media type specified is supported (circuitry is present)
1897 * if memory address is > 1MB, then required mem decode hw is present
1898 * if 10B-2, then agent other than driver will enable DC/DC converter
1899 (hw or software util)
1900
1901
1902*/
1903
Andrew Mortone26c1292006-08-14 22:59:59 -07001904int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001905{
1906 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
1907 struct net_local *lp;
1908 int ret = 0;
1909
1910#if DEBUGGING
1911 net_debug = debug;
1912#else
1913 debug = 0;
1914#endif
1915 if (!dev)
1916 return -ENOMEM;
1917
1918 dev->irq = irq;
1919 dev->base_addr = io;
1920 lp = netdev_priv(dev);
1921
1922#if ALLOW_DMA
1923 if (use_dma) {
1924 lp->use_dma = use_dma;
1925 lp->dma = dma;
1926 lp->dmasize = dmasize;
1927 }
1928#endif
1929
1930 spin_lock_init(&lp->lock);
1931
1932 /* boy, they'd better get these right */
1933 if (!strcmp(media, "rj45"))
1934 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1935 else if (!strcmp(media, "aui"))
1936 lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI;
1937 else if (!strcmp(media, "bnc"))
1938 lp->adapter_cnf = A_CNF_MEDIA_10B_2 | A_CNF_10B_2;
1939 else
1940 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1941
1942 if (duplex==-1)
1943 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1944
1945 if (io == 0) {
1946 printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
1947 printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
1948 ret = -EPERM;
1949 goto out;
1950 } else if (io <= 0x1ff) {
1951 ret = -ENXIO;
1952 goto out;
1953 }
1954
1955#if ALLOW_DMA
1956 if (use_dma && dmasize != 16 && dmasize != 64) {
1957 printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
1958 ret = -EPERM;
1959 goto out;
1960 }
1961#endif
1962 ret = cs89x0_probe1(dev, io, 1);
1963 if (ret)
1964 goto out;
1965
Linus Torvalds1da177e2005-04-16 15:20:36 -07001966 dev_cs89x0 = dev;
1967 return 0;
1968out:
1969 free_netdev(dev);
1970 return ret;
1971}
1972
Al Viroafc8eb42006-06-14 18:50:53 -04001973void __exit
Linus Torvalds1da177e2005-04-16 15:20:36 -07001974cleanup_module(void)
1975{
1976 unregister_netdev(dev_cs89x0);
Lennert Buytenhekfc8c7d72006-01-08 01:01:08 -08001977 writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978 release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
1979 free_netdev(dev_cs89x0);
1980}
1981#endif /* MODULE */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001982
Linus Torvalds1da177e2005-04-16 15:20:36 -07001983/*
1984 * Local variables:
1985 * version-control: t
1986 * kept-new-versions: 5
1987 * c-indent-level: 8
1988 * tab-width: 8
1989 * End:
1990 *
1991 */