blob: aa0bf6e1c69493933b153b818dc7badc0866b84f [file] [log] [blame]
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001/*
2 * Microchip ENC28J60 ethernet driver (MAC + PHY)
3 *
4 * Copyright (C) 2007 Eurek srl
5 * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
6 * based on enc28j60.c written by David Anders for 2.4 kernel version
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
14 */
15
16#include <linux/module.h>
17#include <linux/kernel.h>
18#include <linux/types.h>
19#include <linux/fcntl.h>
20#include <linux/interrupt.h>
21#include <linux/slab.h>
22#include <linux/string.h>
23#include <linux/errno.h>
24#include <linux/init.h>
25#include <linux/netdevice.h>
26#include <linux/etherdevice.h>
27#include <linux/ethtool.h>
28#include <linux/tcp.h>
29#include <linux/skbuff.h>
30#include <linux/delay.h>
31#include <linux/spi/spi.h>
32
33#include "enc28j60_hw.h"
34
35#define DRV_NAME "enc28j60"
36#define DRV_VERSION "1.01"
37
38#define SPI_OPLEN 1
39
40#define ENC28J60_MSG_DEFAULT \
41 (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
42
43/* Buffer size required for the largest SPI transfer (i.e., reading a
44 * frame). */
45#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
46
47#define TX_TIMEOUT (4 * HZ)
48
49/* Max TX retries in case of collision as suggested by errata datasheet */
50#define MAX_TX_RETRYCOUNT 16
51
52enum {
53 RXFILTER_NORMAL,
54 RXFILTER_MULTI,
55 RXFILTER_PROMISC
56};
57
58/* Driver local data */
59struct enc28j60_net {
60 struct net_device *netdev;
61 struct spi_device *spi;
62 struct mutex lock;
63 struct sk_buff *tx_skb;
64 struct work_struct tx_work;
65 struct work_struct irq_work;
66 struct work_struct setrx_work;
67 struct work_struct restart_work;
68 u8 bank; /* current register bank selected */
69 u16 next_pk_ptr; /* next packet pointer within FIFO */
70 u16 max_pk_counter; /* statistics: max packet counter */
71 u16 tx_retry_count;
72 bool hw_enable;
73 bool full_duplex;
74 int rxfilter;
75 u32 msg_enable;
76 u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
77};
78
79/* use ethtool to change the level for any given device */
80static struct {
81 u32 msg_enable;
82} debug = { -1 };
83
84/*
85 * SPI read buffer
86 * wait for the SPI transfer and copy received data to destination
87 */
88static int
89spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
90{
91 u8 *rx_buf = priv->spi_transfer_buf + 4;
92 u8 *tx_buf = priv->spi_transfer_buf;
93 struct spi_transfer t = {
94 .tx_buf = tx_buf,
95 .rx_buf = rx_buf,
96 .len = SPI_OPLEN + len,
97 };
98 struct spi_message msg;
99 int ret;
100
101 tx_buf[0] = ENC28J60_READ_BUF_MEM;
102 tx_buf[1] = tx_buf[2] = tx_buf[3] = 0; /* don't care */
103
104 spi_message_init(&msg);
105 spi_message_add_tail(&t, &msg);
106 ret = spi_sync(priv->spi, &msg);
107 if (ret == 0) {
108 memcpy(data, &rx_buf[SPI_OPLEN], len);
109 ret = msg.status;
110 }
111 if (ret && netif_msg_drv(priv))
112 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
113 __FUNCTION__, ret);
114
115 return ret;
116}
117
118/*
119 * SPI write buffer
120 */
121static int spi_write_buf(struct enc28j60_net *priv, int len,
122 const u8 *data)
123{
124 int ret;
125
126 if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
127 ret = -EINVAL;
128 else {
129 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
130 memcpy(&priv->spi_transfer_buf[1], data, len);
131 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
132 if (ret && netif_msg_drv(priv))
133 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
134 __FUNCTION__, ret);
135 }
136 return ret;
137}
138
139/*
140 * basic SPI read operation
141 */
142static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
143 u8 addr)
144{
145 u8 tx_buf[2];
146 u8 rx_buf[4];
147 u8 val = 0;
148 int ret;
149 int slen = SPI_OPLEN;
150
151 /* do dummy read if needed */
152 if (addr & SPRD_MASK)
153 slen++;
154
155 tx_buf[0] = op | (addr & ADDR_MASK);
156 ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
157 if (ret)
158 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
159 __FUNCTION__, ret);
160 else
161 val = rx_buf[slen - 1];
162
163 return val;
164}
165
166/*
167 * basic SPI write operation
168 */
169static int spi_write_op(struct enc28j60_net *priv, u8 op,
170 u8 addr, u8 val)
171{
172 int ret;
173
174 priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
175 priv->spi_transfer_buf[1] = val;
176 ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
177 if (ret && netif_msg_drv(priv))
178 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
179 __FUNCTION__, ret);
180 return ret;
181}
182
183static void enc28j60_soft_reset(struct enc28j60_net *priv)
184{
185 if (netif_msg_hw(priv))
186 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
187
188 spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
189 /* Errata workaround #1, CLKRDY check is unreliable,
190 * delay at least 1 mS instead */
191 udelay(2000);
192}
193
194/*
195 * select the current register bank if necessary
196 */
197static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
198{
199 if ((addr & BANK_MASK) != priv->bank) {
200 u8 b = (addr & BANK_MASK) >> 5;
201
202 if (b != (ECON1_BSEL1 | ECON1_BSEL0))
203 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
204 ECON1_BSEL1 | ECON1_BSEL0);
205 if (b != 0)
206 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, b);
207 priv->bank = (addr & BANK_MASK);
208 }
209}
210
211/*
212 * Register access routines through the SPI bus.
213 * Every register access comes in two flavours:
214 * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
215 * atomically more than one register
216 * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
217 *
218 * Some registers can be accessed through the bit field clear and
219 * bit field set to avoid a read modify write cycle.
220 */
221
222/*
223 * Register bit field Set
224 */
225static void nolock_reg_bfset(struct enc28j60_net *priv,
226 u8 addr, u8 mask)
227{
228 enc28j60_set_bank(priv, addr);
229 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
230}
231
232static void locked_reg_bfset(struct enc28j60_net *priv,
233 u8 addr, u8 mask)
234{
235 mutex_lock(&priv->lock);
236 nolock_reg_bfset(priv, addr, mask);
237 mutex_unlock(&priv->lock);
238}
239
240/*
241 * Register bit field Clear
242 */
243static void nolock_reg_bfclr(struct enc28j60_net *priv,
244 u8 addr, u8 mask)
245{
246 enc28j60_set_bank(priv, addr);
247 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
248}
249
250static void locked_reg_bfclr(struct enc28j60_net *priv,
251 u8 addr, u8 mask)
252{
253 mutex_lock(&priv->lock);
254 nolock_reg_bfclr(priv, addr, mask);
255 mutex_unlock(&priv->lock);
256}
257
258/*
259 * Register byte read
260 */
261static int nolock_regb_read(struct enc28j60_net *priv,
262 u8 address)
263{
264 enc28j60_set_bank(priv, address);
265 return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
266}
267
268static int locked_regb_read(struct enc28j60_net *priv,
269 u8 address)
270{
271 int ret;
272
273 mutex_lock(&priv->lock);
274 ret = nolock_regb_read(priv, address);
275 mutex_unlock(&priv->lock);
276
277 return ret;
278}
279
280/*
281 * Register word read
282 */
283static int nolock_regw_read(struct enc28j60_net *priv,
284 u8 address)
285{
286 int rl, rh;
287
288 enc28j60_set_bank(priv, address);
289 rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
290 rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
291
292 return (rh << 8) | rl;
293}
294
295static int locked_regw_read(struct enc28j60_net *priv,
296 u8 address)
297{
298 int ret;
299
300 mutex_lock(&priv->lock);
301 ret = nolock_regw_read(priv, address);
302 mutex_unlock(&priv->lock);
303
304 return ret;
305}
306
307/*
308 * Register byte write
309 */
310static void nolock_regb_write(struct enc28j60_net *priv,
311 u8 address, u8 data)
312{
313 enc28j60_set_bank(priv, address);
314 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
315}
316
317static void locked_regb_write(struct enc28j60_net *priv,
318 u8 address, u8 data)
319{
320 mutex_lock(&priv->lock);
321 nolock_regb_write(priv, address, data);
322 mutex_unlock(&priv->lock);
323}
324
325/*
326 * Register word write
327 */
328static void nolock_regw_write(struct enc28j60_net *priv,
329 u8 address, u16 data)
330{
331 enc28j60_set_bank(priv, address);
332 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
333 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
334 (u8) (data >> 8));
335}
336
337static void locked_regw_write(struct enc28j60_net *priv,
338 u8 address, u16 data)
339{
340 mutex_lock(&priv->lock);
341 nolock_regw_write(priv, address, data);
342 mutex_unlock(&priv->lock);
343}
344
345/*
346 * Buffer memory read
347 * Select the starting address and execute a SPI buffer read
348 */
349static void enc28j60_mem_read(struct enc28j60_net *priv,
350 u16 addr, int len, u8 *data)
351{
352 mutex_lock(&priv->lock);
353 nolock_regw_write(priv, ERDPTL, addr);
354#ifdef CONFIG_ENC28J60_WRITEVERIFY
355 if (netif_msg_drv(priv)) {
356 u16 reg;
357 reg = nolock_regw_read(priv, ERDPTL);
358 if (reg != addr)
359 printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
360 "(0x%04x - 0x%04x)\n", __FUNCTION__, reg, addr);
361 }
362#endif
363 spi_read_buf(priv, len, data);
364 mutex_unlock(&priv->lock);
365}
366
367/*
368 * Write packet to enc28j60 TX buffer memory
369 */
370static void
371enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
372{
373 mutex_lock(&priv->lock);
374 /* Set the write pointer to start of transmit buffer area */
375 nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
376#ifdef CONFIG_ENC28J60_WRITEVERIFY
377 if (netif_msg_drv(priv)) {
378 u16 reg;
379 reg = nolock_regw_read(priv, EWRPTL);
380 if (reg != TXSTART_INIT)
381 printk(KERN_DEBUG DRV_NAME
382 ": %s() ERWPT:0x%04x != 0x%04x\n",
383 __FUNCTION__, reg, TXSTART_INIT);
384 }
385#endif
386 /* Set the TXND pointer to correspond to the packet size given */
387 nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
388 /* write per-packet control byte */
389 spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
390 if (netif_msg_hw(priv))
391 printk(KERN_DEBUG DRV_NAME
392 ": %s() after control byte ERWPT:0x%04x\n",
393 __FUNCTION__, nolock_regw_read(priv, EWRPTL));
394 /* copy the packet into the transmit buffer */
395 spi_write_buf(priv, len, data);
396 if (netif_msg_hw(priv))
397 printk(KERN_DEBUG DRV_NAME
398 ": %s() after write packet ERWPT:0x%04x, len=%d\n",
399 __FUNCTION__, nolock_regw_read(priv, EWRPTL), len);
400 mutex_unlock(&priv->lock);
401}
402
David Brownell7dac6f82008-06-12 21:38:06 -0700403static unsigned long msec20_to_jiffies;
404
405static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
406{
407 unsigned long timeout = jiffies + msec20_to_jiffies;
408
409 /* 20 msec timeout read */
410 while ((nolock_regb_read(priv, reg) & mask) != val) {
411 if (time_after(jiffies, timeout)) {
412 if (netif_msg_drv(priv))
413 dev_dbg(&priv->spi->dev,
414 "reg %02x ready timeout!\n", reg);
415 return -ETIMEDOUT;
416 }
417 cpu_relax();
418 }
419 return 0;
420}
421
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100422/*
423 * Wait until the PHY operation is complete.
424 */
425static int wait_phy_ready(struct enc28j60_net *priv)
426{
David Brownell7dac6f82008-06-12 21:38:06 -0700427 return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100428}
429
430/*
431 * PHY register read
432 * PHY registers are not accessed directly, but through the MII
433 */
434static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
435{
436 u16 ret;
437
438 mutex_lock(&priv->lock);
439 /* set the PHY register address */
440 nolock_regb_write(priv, MIREGADR, address);
441 /* start the register read operation */
442 nolock_regb_write(priv, MICMD, MICMD_MIIRD);
443 /* wait until the PHY read completes */
444 wait_phy_ready(priv);
445 /* quit reading */
446 nolock_regb_write(priv, MICMD, 0x00);
447 /* return the data */
448 ret = nolock_regw_read(priv, MIRDL);
449 mutex_unlock(&priv->lock);
450
451 return ret;
452}
453
454static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
455{
456 int ret;
457
458 mutex_lock(&priv->lock);
459 /* set the PHY register address */
460 nolock_regb_write(priv, MIREGADR, address);
461 /* write the PHY data */
462 nolock_regw_write(priv, MIWRL, data);
463 /* wait until the PHY write completes and return */
464 ret = wait_phy_ready(priv);
465 mutex_unlock(&priv->lock);
466
467 return ret;
468}
469
470/*
471 * Program the hardware MAC address from dev->dev_addr.
472 */
473static int enc28j60_set_hw_macaddr(struct net_device *ndev)
474{
475 int ret;
476 struct enc28j60_net *priv = netdev_priv(ndev);
477
478 mutex_lock(&priv->lock);
479 if (!priv->hw_enable) {
480 if (netif_msg_drv(priv)) {
481 DECLARE_MAC_BUF(mac);
482 printk(KERN_INFO DRV_NAME
483 ": %s: Setting MAC address to %s\n",
484 ndev->name, print_mac(mac, ndev->dev_addr));
485 }
486 /* NOTE: MAC address in ENC28J60 is byte-backward */
487 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
488 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
489 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
490 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
491 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
492 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
493 ret = 0;
494 } else {
495 if (netif_msg_drv(priv))
496 printk(KERN_DEBUG DRV_NAME
497 ": %s() Hardware must be disabled to set "
498 "Mac address\n", __FUNCTION__);
499 ret = -EBUSY;
500 }
501 mutex_unlock(&priv->lock);
502 return ret;
503}
504
505/*
506 * Store the new hardware address in dev->dev_addr, and update the MAC.
507 */
508static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
509{
510 struct sockaddr *address = addr;
511
512 if (netif_running(dev))
513 return -EBUSY;
514 if (!is_valid_ether_addr(address->sa_data))
515 return -EADDRNOTAVAIL;
516
517 memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
518 return enc28j60_set_hw_macaddr(dev);
519}
520
521/*
522 * Debug routine to dump useful register contents
523 */
524static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
525{
526 mutex_lock(&priv->lock);
527 printk(KERN_DEBUG DRV_NAME " %s\n"
528 "HwRevID: 0x%02x\n"
529 "Cntrl: ECON1 ECON2 ESTAT EIR EIE\n"
530 " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n"
531 "MAC : MACON1 MACON3 MACON4\n"
532 " 0x%02x 0x%02x 0x%02x\n"
533 "Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
534 " 0x%04x 0x%04x 0x%04x 0x%04x "
535 "0x%02x 0x%02x 0x%04x\n"
536 "Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n"
537 " 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n",
538 msg, nolock_regb_read(priv, EREVID),
539 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
540 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
541 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
542 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
543 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
544 nolock_regw_read(priv, ERXWRPTL),
545 nolock_regw_read(priv, ERXRDPTL),
546 nolock_regb_read(priv, ERXFCON),
547 nolock_regb_read(priv, EPKTCNT),
548 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
549 nolock_regw_read(priv, ETXNDL),
550 nolock_regb_read(priv, MACLCON1),
551 nolock_regb_read(priv, MACLCON2),
552 nolock_regb_read(priv, MAPHSUP));
553 mutex_unlock(&priv->lock);
554}
555
556/*
557 * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
558 */
559static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
560{
561 u16 erxrdpt;
562
563 if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
564 erxrdpt = end;
565 else
566 erxrdpt = next_packet_ptr - 1;
567
568 return erxrdpt;
569}
570
571static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
572{
573 u16 erxrdpt;
574
575 if (start > 0x1FFF || end > 0x1FFF || start > end) {
576 if (netif_msg_drv(priv))
577 printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
578 "bad parameters!\n", __FUNCTION__, start, end);
579 return;
580 }
581 /* set receive buffer start + end */
582 priv->next_pk_ptr = start;
583 nolock_regw_write(priv, ERXSTL, start);
584 erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
585 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
586 nolock_regw_write(priv, ERXNDL, end);
587}
588
589static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
590{
591 if (start > 0x1FFF || end > 0x1FFF || start > end) {
592 if (netif_msg_drv(priv))
593 printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
594 "bad parameters!\n", __FUNCTION__, start, end);
595 return;
596 }
597 /* set transmit buffer start + end */
598 nolock_regw_write(priv, ETXSTL, start);
599 nolock_regw_write(priv, ETXNDL, end);
600}
601
David Brownell7dac6f82008-06-12 21:38:06 -0700602/*
603 * Low power mode shrinks power consumption about 100x, so we'd like
604 * the chip to be in that mode whenever it's inactive. (However, we
605 * can't stay in lowpower mode during suspend with WOL active.)
606 */
607static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
608{
609 if (netif_msg_drv(priv))
610 dev_dbg(&priv->spi->dev, "%s power...\n",
611 is_low ? "low" : "high");
612
613 mutex_lock(&priv->lock);
614 if (is_low) {
615 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
616 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
617 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
618 /* ECON2_VRPS was set during initialization */
619 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
620 } else {
621 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
622 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
623 /* caller sets ECON1_RXEN */
624 }
625 mutex_unlock(&priv->lock);
626}
627
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100628static int enc28j60_hw_init(struct enc28j60_net *priv)
629{
630 u8 reg;
631
632 if (netif_msg_drv(priv))
633 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __FUNCTION__,
634 priv->full_duplex ? "FullDuplex" : "HalfDuplex");
635
636 mutex_lock(&priv->lock);
637 /* first reset the chip */
638 enc28j60_soft_reset(priv);
639 /* Clear ECON1 */
640 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
641 priv->bank = 0;
642 priv->hw_enable = false;
643 priv->tx_retry_count = 0;
644 priv->max_pk_counter = 0;
645 priv->rxfilter = RXFILTER_NORMAL;
David Brownell7dac6f82008-06-12 21:38:06 -0700646 /* enable address auto increment and voltage regulator powersave */
647 nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100648
649 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
650 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
651 mutex_unlock(&priv->lock);
652
653 /*
654 * Check the RevID.
655 * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
656 * damaged
657 */
658 reg = locked_regb_read(priv, EREVID);
659 if (netif_msg_drv(priv))
660 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
661 if (reg == 0x00 || reg == 0xff) {
662 if (netif_msg_drv(priv))
663 printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
664 __FUNCTION__, reg);
665 return 0;
666 }
667
668 /* default filter mode: (unicast OR broadcast) AND crc valid */
669 locked_regb_write(priv, ERXFCON,
670 ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
671
672 /* enable MAC receive */
673 locked_regb_write(priv, MACON1,
674 MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
675 /* enable automatic padding and CRC operations */
676 if (priv->full_duplex) {
677 locked_regb_write(priv, MACON3,
678 MACON3_PADCFG0 | MACON3_TXCRCEN |
679 MACON3_FRMLNEN | MACON3_FULDPX);
680 /* set inter-frame gap (non-back-to-back) */
681 locked_regb_write(priv, MAIPGL, 0x12);
682 /* set inter-frame gap (back-to-back) */
683 locked_regb_write(priv, MABBIPG, 0x15);
684 } else {
685 locked_regb_write(priv, MACON3,
686 MACON3_PADCFG0 | MACON3_TXCRCEN |
687 MACON3_FRMLNEN);
688 locked_regb_write(priv, MACON4, 1 << 6); /* DEFER bit */
689 /* set inter-frame gap (non-back-to-back) */
690 locked_regw_write(priv, MAIPGL, 0x0C12);
691 /* set inter-frame gap (back-to-back) */
692 locked_regb_write(priv, MABBIPG, 0x12);
693 }
694 /*
695 * MACLCON1 (default)
696 * MACLCON2 (default)
697 * Set the maximum packet size which the controller will accept
698 */
699 locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
700
701 /* Configure LEDs */
702 if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
703 return 0;
704
705 if (priv->full_duplex) {
706 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
707 return 0;
708 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
709 return 0;
710 } else {
711 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
712 return 0;
713 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
714 return 0;
715 }
716 if (netif_msg_hw(priv))
717 enc28j60_dump_regs(priv, "Hw initialized.");
718
719 return 1;
720}
721
722static void enc28j60_hw_enable(struct enc28j60_net *priv)
723{
David Brownell7dac6f82008-06-12 21:38:06 -0700724 /* enable interrupts */
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100725 if (netif_msg_hw(priv))
726 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
727 __FUNCTION__);
728
729 enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
730
731 mutex_lock(&priv->lock);
732 nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
733 EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
734 nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
735 EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
736
737 /* enable receive logic */
738 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
739 priv->hw_enable = true;
740 mutex_unlock(&priv->lock);
741}
742
743static void enc28j60_hw_disable(struct enc28j60_net *priv)
744{
745 mutex_lock(&priv->lock);
746 /* disable interrutps and packet reception */
747 nolock_regb_write(priv, EIE, 0x00);
748 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
749 priv->hw_enable = false;
750 mutex_unlock(&priv->lock);
751}
752
753static int
754enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
755{
756 struct enc28j60_net *priv = netdev_priv(ndev);
757 int ret = 0;
758
759 if (!priv->hw_enable) {
David Brownell7dac6f82008-06-12 21:38:06 -0700760 /* link is in low power mode now; duplex setting
761 * will take effect on next enc28j60_hw_init().
762 */
763 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100764 priv->full_duplex = (duplex == DUPLEX_FULL);
David Brownell7dac6f82008-06-12 21:38:06 -0700765 else {
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100766 if (netif_msg_link(priv))
767 dev_warn(&ndev->dev,
768 "unsupported link setting\n");
769 ret = -EOPNOTSUPP;
770 }
771 } else {
772 if (netif_msg_link(priv))
773 dev_warn(&ndev->dev, "Warning: hw must be disabled "
774 "to set link mode\n");
775 ret = -EBUSY;
776 }
777 return ret;
778}
779
780/*
781 * Read the Transmit Status Vector
782 */
783static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
784{
785 int endptr;
786
787 endptr = locked_regw_read(priv, ETXNDL);
788 if (netif_msg_hw(priv))
789 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
790 endptr + 1);
791 enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
792}
793
794static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
795 u8 tsv[TSV_SIZE])
796{
797 u16 tmp1, tmp2;
798
799 printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
800 tmp1 = tsv[1];
801 tmp1 <<= 8;
802 tmp1 |= tsv[0];
803
804 tmp2 = tsv[5];
805 tmp2 <<= 8;
806 tmp2 |= tsv[4];
807
808 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
809 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
810 printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
811 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
812 TSV_GETBIT(tsv, TSV_TXCRCERROR),
813 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
814 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
815 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
816 "PacketDefer: %d, ExDefer: %d\n",
817 TSV_GETBIT(tsv, TSV_TXMULTICAST),
818 TSV_GETBIT(tsv, TSV_TXBROADCAST),
819 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
820 TSV_GETBIT(tsv, TSV_TXEXDEFER));
821 printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
822 "Giant: %d, Underrun: %d\n",
823 TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
824 TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
825 TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
826 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
827 "BackPressApp: %d, VLanTagFrame: %d\n",
828 TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
829 TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
830 TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
831 TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
832}
833
834/*
835 * Receive Status vector
836 */
837static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
838 u16 pk_ptr, int len, u16 sts)
839{
840 printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
841 msg, pk_ptr);
842 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
843 RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
844 printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
845 " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
846 RSV_GETBIT(sts, RSV_CRCERROR),
847 RSV_GETBIT(sts, RSV_LENCHECKERR),
848 RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
849 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
850 "LongDropEvent: %d, CarrierEvent: %d\n",
851 RSV_GETBIT(sts, RSV_RXMULTICAST),
852 RSV_GETBIT(sts, RSV_RXBROADCAST),
853 RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
854 RSV_GETBIT(sts, RSV_CARRIEREV));
855 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
856 " UnknownOp: %d, VLanTagFrame: %d\n",
857 RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
858 RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
859 RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
860 RSV_GETBIT(sts, RSV_RXTYPEVLAN));
861}
862
863static void dump_packet(const char *msg, int len, const char *data)
864{
865 printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
866 print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
867 data, len, true);
868}
869
870/*
871 * Hardware receive function.
872 * Read the buffer memory, update the FIFO pointer to free the buffer,
873 * check the status vector and decrement the packet counter.
874 */
875static void enc28j60_hw_rx(struct net_device *ndev)
876{
877 struct enc28j60_net *priv = netdev_priv(ndev);
878 struct sk_buff *skb = NULL;
879 u16 erxrdpt, next_packet, rxstat;
880 u8 rsv[RSV_SIZE];
881 int len;
882
883 if (netif_msg_rx_status(priv))
884 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
885 priv->next_pk_ptr);
886
887 if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
888 if (netif_msg_rx_err(priv))
889 dev_err(&ndev->dev,
890 "%s() Invalid packet address!! 0x%04x\n",
891 __FUNCTION__, priv->next_pk_ptr);
892 /* packet address corrupted: reset RX logic */
893 mutex_lock(&priv->lock);
894 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
895 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
896 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
897 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
898 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
899 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
900 mutex_unlock(&priv->lock);
901 ndev->stats.rx_errors++;
902 return;
903 }
904 /* Read next packet pointer and rx status vector */
905 enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
906
907 next_packet = rsv[1];
908 next_packet <<= 8;
909 next_packet |= rsv[0];
910
911 len = rsv[3];
912 len <<= 8;
913 len |= rsv[2];
914
915 rxstat = rsv[5];
916 rxstat <<= 8;
917 rxstat |= rsv[4];
918
919 if (netif_msg_rx_status(priv))
920 enc28j60_dump_rsv(priv, __FUNCTION__, next_packet, len, rxstat);
921
922 if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
923 if (netif_msg_rx_err(priv))
924 dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
925 ndev->stats.rx_errors++;
926 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
927 ndev->stats.rx_crc_errors++;
928 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
929 ndev->stats.rx_frame_errors++;
930 } else {
David Brownell02ff05c2008-03-05 18:51:19 -0800931 skb = dev_alloc_skb(len + NET_IP_ALIGN);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100932 if (!skb) {
933 if (netif_msg_rx_err(priv))
934 dev_err(&ndev->dev,
935 "out of memory for Rx'd frame\n");
936 ndev->stats.rx_dropped++;
937 } else {
938 skb->dev = ndev;
David Brownell02ff05c2008-03-05 18:51:19 -0800939 skb_reserve(skb, NET_IP_ALIGN);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100940 /* copy the packet from the receive buffer */
941 enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
942 len, skb_put(skb, len));
943 if (netif_msg_pktdata(priv))
944 dump_packet(__FUNCTION__, skb->len, skb->data);
945 skb->protocol = eth_type_trans(skb, ndev);
946 /* update statistics */
947 ndev->stats.rx_packets++;
948 ndev->stats.rx_bytes += len;
949 ndev->last_rx = jiffies;
950 netif_rx(skb);
951 }
952 }
953 /*
954 * Move the RX read pointer to the start of the next
955 * received packet.
956 * This frees the memory we just read out
957 */
958 erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
959 if (netif_msg_hw(priv))
960 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
961 __FUNCTION__, erxrdpt);
962
963 mutex_lock(&priv->lock);
964 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
965#ifdef CONFIG_ENC28J60_WRITEVERIFY
966 if (netif_msg_drv(priv)) {
967 u16 reg;
968 reg = nolock_regw_read(priv, ERXRDPTL);
969 if (reg != erxrdpt)
970 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
971 "error (0x%04x - 0x%04x)\n", __FUNCTION__,
972 reg, erxrdpt);
973 }
974#endif
975 priv->next_pk_ptr = next_packet;
976 /* we are done with this packet, decrement the packet counter */
977 nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
978 mutex_unlock(&priv->lock);
979}
980
981/*
982 * Calculate free space in RxFIFO
983 */
984static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
985{
986 int epkcnt, erxst, erxnd, erxwr, erxrd;
987 int free_space;
988
989 mutex_lock(&priv->lock);
990 epkcnt = nolock_regb_read(priv, EPKTCNT);
991 if (epkcnt >= 255)
992 free_space = -1;
993 else {
994 erxst = nolock_regw_read(priv, ERXSTL);
995 erxnd = nolock_regw_read(priv, ERXNDL);
996 erxwr = nolock_regw_read(priv, ERXWRPTL);
997 erxrd = nolock_regw_read(priv, ERXRDPTL);
998
999 if (erxwr > erxrd)
1000 free_space = (erxnd - erxst) - (erxwr - erxrd);
1001 else if (erxwr == erxrd)
1002 free_space = (erxnd - erxst);
1003 else
1004 free_space = erxrd - erxwr - 1;
1005 }
1006 mutex_unlock(&priv->lock);
1007 if (netif_msg_rx_status(priv))
1008 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1009 __FUNCTION__, free_space);
1010 return free_space;
1011}
1012
1013/*
1014 * Access the PHY to determine link status
1015 */
1016static void enc28j60_check_link_status(struct net_device *ndev)
1017{
1018 struct enc28j60_net *priv = netdev_priv(ndev);
1019 u16 reg;
1020 int duplex;
1021
1022 reg = enc28j60_phy_read(priv, PHSTAT2);
1023 if (netif_msg_hw(priv))
1024 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1025 "PHSTAT2: %04x\n", __FUNCTION__,
1026 enc28j60_phy_read(priv, PHSTAT1), reg);
1027 duplex = reg & PHSTAT2_DPXSTAT;
1028
1029 if (reg & PHSTAT2_LSTAT) {
1030 netif_carrier_on(ndev);
1031 if (netif_msg_ifup(priv))
1032 dev_info(&ndev->dev, "link up - %s\n",
1033 duplex ? "Full duplex" : "Half duplex");
1034 } else {
1035 if (netif_msg_ifdown(priv))
1036 dev_info(&ndev->dev, "link down\n");
1037 netif_carrier_off(ndev);
1038 }
1039}
1040
1041static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1042{
1043 struct enc28j60_net *priv = netdev_priv(ndev);
1044
1045 if (err)
1046 ndev->stats.tx_errors++;
1047 else
1048 ndev->stats.tx_packets++;
1049
1050 if (priv->tx_skb) {
1051 if (!err)
1052 ndev->stats.tx_bytes += priv->tx_skb->len;
1053 dev_kfree_skb(priv->tx_skb);
1054 priv->tx_skb = NULL;
1055 }
1056 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1057 netif_wake_queue(ndev);
1058}
1059
1060/*
1061 * RX handler
1062 * ignore PKTIF because is unreliable! (look at the errata datasheet)
1063 * check EPKTCNT is the suggested workaround.
1064 * We don't need to clear interrupt flag, automatically done when
1065 * enc28j60_hw_rx() decrements the packet counter.
1066 * Returns how many packet processed.
1067 */
1068static int enc28j60_rx_interrupt(struct net_device *ndev)
1069{
1070 struct enc28j60_net *priv = netdev_priv(ndev);
1071 int pk_counter, ret;
1072
1073 pk_counter = locked_regb_read(priv, EPKTCNT);
1074 if (pk_counter && netif_msg_intr(priv))
1075 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1076 if (pk_counter > priv->max_pk_counter) {
1077 /* update statistics */
1078 priv->max_pk_counter = pk_counter;
1079 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1080 printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1081 priv->max_pk_counter);
1082 }
1083 ret = pk_counter;
1084 while (pk_counter-- > 0)
1085 enc28j60_hw_rx(ndev);
1086
1087 return ret;
1088}
1089
1090static void enc28j60_irq_work_handler(struct work_struct *work)
1091{
1092 struct enc28j60_net *priv =
1093 container_of(work, struct enc28j60_net, irq_work);
1094 struct net_device *ndev = priv->netdev;
1095 int intflags, loop;
1096
1097 if (netif_msg_intr(priv))
1098 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
1099 /* disable further interrupts */
1100 locked_reg_bfclr(priv, EIE, EIE_INTIE);
1101
1102 do {
1103 loop = 0;
1104 intflags = locked_regb_read(priv, EIR);
1105 /* DMA interrupt handler (not currently used) */
1106 if ((intflags & EIR_DMAIF) != 0) {
1107 loop++;
1108 if (netif_msg_intr(priv))
1109 printk(KERN_DEBUG DRV_NAME
1110 ": intDMA(%d)\n", loop);
1111 locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1112 }
1113 /* LINK changed handler */
1114 if ((intflags & EIR_LINKIF) != 0) {
1115 loop++;
1116 if (netif_msg_intr(priv))
1117 printk(KERN_DEBUG DRV_NAME
1118 ": intLINK(%d)\n", loop);
1119 enc28j60_check_link_status(ndev);
1120 /* read PHIR to clear the flag */
1121 enc28j60_phy_read(priv, PHIR);
1122 }
1123 /* TX complete handler */
1124 if ((intflags & EIR_TXIF) != 0) {
1125 bool err = false;
1126 loop++;
1127 if (netif_msg_intr(priv))
1128 printk(KERN_DEBUG DRV_NAME
1129 ": intTX(%d)\n", loop);
1130 priv->tx_retry_count = 0;
1131 if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1132 if (netif_msg_tx_err(priv))
1133 dev_err(&ndev->dev,
1134 "Tx Error (aborted)\n");
1135 err = true;
1136 }
1137 if (netif_msg_tx_done(priv)) {
1138 u8 tsv[TSV_SIZE];
1139 enc28j60_read_tsv(priv, tsv);
1140 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1141 }
1142 enc28j60_tx_clear(ndev, err);
1143 locked_reg_bfclr(priv, EIR, EIR_TXIF);
1144 }
1145 /* TX Error handler */
1146 if ((intflags & EIR_TXERIF) != 0) {
1147 u8 tsv[TSV_SIZE];
1148
1149 loop++;
1150 if (netif_msg_intr(priv))
1151 printk(KERN_DEBUG DRV_NAME
1152 ": intTXErr(%d)\n", loop);
1153 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1154 enc28j60_read_tsv(priv, tsv);
1155 if (netif_msg_tx_err(priv))
1156 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1157 /* Reset TX logic */
1158 mutex_lock(&priv->lock);
1159 nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1160 nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1161 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1162 mutex_unlock(&priv->lock);
1163 /* Transmit Late collision check for retransmit */
1164 if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1165 if (netif_msg_tx_err(priv))
1166 printk(KERN_DEBUG DRV_NAME
1167 ": LateCollision TXErr (%d)\n",
1168 priv->tx_retry_count);
1169 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1170 locked_reg_bfset(priv, ECON1,
1171 ECON1_TXRTS);
1172 else
1173 enc28j60_tx_clear(ndev, true);
1174 } else
1175 enc28j60_tx_clear(ndev, true);
1176 locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1177 }
1178 /* RX Error handler */
1179 if ((intflags & EIR_RXERIF) != 0) {
1180 loop++;
1181 if (netif_msg_intr(priv))
1182 printk(KERN_DEBUG DRV_NAME
1183 ": intRXErr(%d)\n", loop);
1184 /* Check free FIFO space to flag RX overrun */
1185 if (enc28j60_get_free_rxfifo(priv) <= 0) {
1186 if (netif_msg_rx_err(priv))
1187 printk(KERN_DEBUG DRV_NAME
1188 ": RX Overrun\n");
1189 ndev->stats.rx_dropped++;
1190 }
1191 locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1192 }
1193 /* RX handler */
1194 if (enc28j60_rx_interrupt(ndev))
1195 loop++;
1196 } while (loop);
1197
1198 /* re-enable interrupts */
1199 locked_reg_bfset(priv, EIE, EIE_INTIE);
1200 if (netif_msg_intr(priv))
1201 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __FUNCTION__);
1202}
1203
1204/*
1205 * Hardware transmit function.
1206 * Fill the buffer memory and send the contents of the transmit buffer
1207 * onto the network
1208 */
1209static void enc28j60_hw_tx(struct enc28j60_net *priv)
1210{
1211 if (netif_msg_tx_queued(priv))
1212 printk(KERN_DEBUG DRV_NAME
1213 ": Tx Packet Len:%d\n", priv->tx_skb->len);
1214
1215 if (netif_msg_pktdata(priv))
1216 dump_packet(__FUNCTION__,
1217 priv->tx_skb->len, priv->tx_skb->data);
1218 enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1219
1220#ifdef CONFIG_ENC28J60_WRITEVERIFY
1221 /* readback and verify written data */
1222 if (netif_msg_drv(priv)) {
1223 int test_len, k;
1224 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1225 int okflag;
1226
1227 test_len = priv->tx_skb->len;
1228 if (test_len > sizeof(test_buf))
1229 test_len = sizeof(test_buf);
1230
1231 /* + 1 to skip control byte */
1232 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1233 okflag = 1;
1234 for (k = 0; k < test_len; k++) {
1235 if (priv->tx_skb->data[k] != test_buf[k]) {
1236 printk(KERN_DEBUG DRV_NAME
1237 ": Error, %d location differ: "
1238 "0x%02x-0x%02x\n", k,
1239 priv->tx_skb->data[k], test_buf[k]);
1240 okflag = 0;
1241 }
1242 }
1243 if (!okflag)
1244 printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1245 "verify ERROR!\n");
1246 }
1247#endif
1248 /* set TX request flag */
1249 locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1250}
1251
1252static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1253{
1254 struct enc28j60_net *priv = netdev_priv(dev);
1255
1256 if (netif_msg_tx_queued(priv))
1257 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
1258
1259 /* If some error occurs while trying to transmit this
1260 * packet, you should return '1' from this function.
1261 * In such a case you _may not_ do anything to the
1262 * SKB, it is still owned by the network queueing
1263 * layer when an error is returned. This means you
1264 * may not modify any SKB fields, you may not free
1265 * the SKB, etc.
1266 */
1267 netif_stop_queue(dev);
1268
1269 /* save the timestamp */
1270 priv->netdev->trans_start = jiffies;
1271 /* Remember the skb for deferred processing */
1272 priv->tx_skb = skb;
1273 schedule_work(&priv->tx_work);
1274
1275 return 0;
1276}
1277
1278static void enc28j60_tx_work_handler(struct work_struct *work)
1279{
1280 struct enc28j60_net *priv =
1281 container_of(work, struct enc28j60_net, tx_work);
1282
1283 /* actual delivery of data */
1284 enc28j60_hw_tx(priv);
1285}
1286
1287static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1288{
1289 struct enc28j60_net *priv = dev_id;
1290
1291 /*
1292 * Can't do anything in interrupt context because we need to
1293 * block (spi_sync() is blocking) so fire of the interrupt
1294 * handling workqueue.
1295 * Remember that we access enc28j60 registers through SPI bus
1296 * via spi_sync() call.
1297 */
1298 schedule_work(&priv->irq_work);
1299
1300 return IRQ_HANDLED;
1301}
1302
1303static void enc28j60_tx_timeout(struct net_device *ndev)
1304{
1305 struct enc28j60_net *priv = netdev_priv(ndev);
1306
1307 if (netif_msg_timer(priv))
1308 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1309
1310 ndev->stats.tx_errors++;
1311 /* can't restart safely under softirq */
1312 schedule_work(&priv->restart_work);
1313}
1314
1315/*
1316 * Open/initialize the board. This is called (in the current kernel)
1317 * sometime after booting when the 'ifconfig' program is run.
1318 *
1319 * This routine should set everything up anew at each open, even
1320 * registers that "should" only need to be set once at boot, so that
1321 * there is non-reboot way to recover if something goes wrong.
1322 */
1323static int enc28j60_net_open(struct net_device *dev)
1324{
1325 struct enc28j60_net *priv = netdev_priv(dev);
1326
1327 if (netif_msg_drv(priv))
1328 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
1329
1330 if (!is_valid_ether_addr(dev->dev_addr)) {
1331 if (netif_msg_ifup(priv)) {
1332 DECLARE_MAC_BUF(mac);
1333 dev_err(&dev->dev, "invalid MAC address %s\n",
1334 print_mac(mac, dev->dev_addr));
1335 }
1336 return -EADDRNOTAVAIL;
1337 }
David Brownell7dac6f82008-06-12 21:38:06 -07001338 /* Reset the hardware here (and take it out of low power mode) */
1339 enc28j60_lowpower(priv, false);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001340 enc28j60_hw_disable(priv);
1341 if (!enc28j60_hw_init(priv)) {
1342 if (netif_msg_ifup(priv))
1343 dev_err(&dev->dev, "hw_reset() failed\n");
1344 return -EINVAL;
1345 }
1346 /* Update the MAC address (in case user has changed it) */
1347 enc28j60_set_hw_macaddr(dev);
1348 /* Enable interrupts */
1349 enc28j60_hw_enable(priv);
1350 /* check link status */
1351 enc28j60_check_link_status(dev);
1352 /* We are now ready to accept transmit requests from
1353 * the queueing layer of the networking.
1354 */
1355 netif_start_queue(dev);
1356
1357 return 0;
1358}
1359
1360/* The inverse routine to net_open(). */
1361static int enc28j60_net_close(struct net_device *dev)
1362{
1363 struct enc28j60_net *priv = netdev_priv(dev);
1364
1365 if (netif_msg_drv(priv))
1366 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
1367
1368 enc28j60_hw_disable(priv);
David Brownell7dac6f82008-06-12 21:38:06 -07001369 enc28j60_lowpower(priv, true);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001370 netif_stop_queue(dev);
1371
1372 return 0;
1373}
1374
1375/*
1376 * Set or clear the multicast filter for this adapter
1377 * num_addrs == -1 Promiscuous mode, receive all packets
1378 * num_addrs == 0 Normal mode, filter out multicast packets
1379 * num_addrs > 0 Multicast mode, receive normal and MC packets
1380 */
1381static void enc28j60_set_multicast_list(struct net_device *dev)
1382{
1383 struct enc28j60_net *priv = netdev_priv(dev);
1384 int oldfilter = priv->rxfilter;
1385
1386 if (dev->flags & IFF_PROMISC) {
1387 if (netif_msg_link(priv))
1388 dev_info(&dev->dev, "promiscuous mode\n");
1389 priv->rxfilter = RXFILTER_PROMISC;
1390 } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1391 if (netif_msg_link(priv))
1392 dev_info(&dev->dev, "%smulticast mode\n",
1393 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1394 priv->rxfilter = RXFILTER_MULTI;
1395 } else {
1396 if (netif_msg_link(priv))
1397 dev_info(&dev->dev, "normal mode\n");
1398 priv->rxfilter = RXFILTER_NORMAL;
1399 }
1400
1401 if (oldfilter != priv->rxfilter)
1402 schedule_work(&priv->setrx_work);
1403}
1404
1405static void enc28j60_setrx_work_handler(struct work_struct *work)
1406{
1407 struct enc28j60_net *priv =
1408 container_of(work, struct enc28j60_net, setrx_work);
1409
1410 if (priv->rxfilter == RXFILTER_PROMISC) {
1411 if (netif_msg_drv(priv))
1412 printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1413 locked_regb_write(priv, ERXFCON, 0x00);
1414 } else if (priv->rxfilter == RXFILTER_MULTI) {
1415 if (netif_msg_drv(priv))
1416 printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1417 locked_regb_write(priv, ERXFCON,
1418 ERXFCON_UCEN | ERXFCON_CRCEN |
1419 ERXFCON_BCEN | ERXFCON_MCEN);
1420 } else {
1421 if (netif_msg_drv(priv))
1422 printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1423 locked_regb_write(priv, ERXFCON,
1424 ERXFCON_UCEN | ERXFCON_CRCEN |
1425 ERXFCON_BCEN);
1426 }
1427}
1428
1429static void enc28j60_restart_work_handler(struct work_struct *work)
1430{
1431 struct enc28j60_net *priv =
1432 container_of(work, struct enc28j60_net, restart_work);
1433 struct net_device *ndev = priv->netdev;
1434 int ret;
1435
1436 rtnl_lock();
1437 if (netif_running(ndev)) {
1438 enc28j60_net_close(ndev);
1439 ret = enc28j60_net_open(ndev);
1440 if (unlikely(ret)) {
1441 dev_info(&ndev->dev, " could not restart %d\n", ret);
1442 dev_close(ndev);
1443 }
1444 }
1445 rtnl_unlock();
1446}
1447
1448/* ......................... ETHTOOL SUPPORT ........................... */
1449
1450static void
1451enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1452{
1453 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1454 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1455 strlcpy(info->bus_info,
1456 dev->dev.parent->bus_id, sizeof(info->bus_info));
1457}
1458
1459static int
1460enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1461{
1462 struct enc28j60_net *priv = netdev_priv(dev);
1463
1464 cmd->transceiver = XCVR_INTERNAL;
1465 cmd->supported = SUPPORTED_10baseT_Half
1466 | SUPPORTED_10baseT_Full
1467 | SUPPORTED_TP;
1468 cmd->speed = SPEED_10;
1469 cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1470 cmd->port = PORT_TP;
1471 cmd->autoneg = AUTONEG_DISABLE;
1472
1473 return 0;
1474}
1475
1476static int
1477enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1478{
1479 return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1480}
1481
1482static u32 enc28j60_get_msglevel(struct net_device *dev)
1483{
1484 struct enc28j60_net *priv = netdev_priv(dev);
1485 return priv->msg_enable;
1486}
1487
1488static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1489{
1490 struct enc28j60_net *priv = netdev_priv(dev);
1491 priv->msg_enable = val;
1492}
1493
1494static const struct ethtool_ops enc28j60_ethtool_ops = {
1495 .get_settings = enc28j60_get_settings,
1496 .set_settings = enc28j60_set_settings,
1497 .get_drvinfo = enc28j60_get_drvinfo,
1498 .get_msglevel = enc28j60_get_msglevel,
1499 .set_msglevel = enc28j60_set_msglevel,
1500};
1501
1502static int enc28j60_chipset_init(struct net_device *dev)
1503{
1504 struct enc28j60_net *priv = netdev_priv(dev);
1505
1506 return enc28j60_hw_init(priv);
1507}
1508
1509static int __devinit enc28j60_probe(struct spi_device *spi)
1510{
1511 struct net_device *dev;
1512 struct enc28j60_net *priv;
1513 int ret = 0;
1514
1515 if (netif_msg_drv(&debug))
1516 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1517 DRV_VERSION);
1518
1519 dev = alloc_etherdev(sizeof(struct enc28j60_net));
1520 if (!dev) {
1521 if (netif_msg_drv(&debug))
1522 dev_err(&spi->dev, DRV_NAME
1523 ": unable to alloc new ethernet\n");
1524 ret = -ENOMEM;
1525 goto error_alloc;
1526 }
1527 priv = netdev_priv(dev);
1528
1529 priv->netdev = dev; /* priv to netdev reference */
1530 priv->spi = spi; /* priv to spi reference */
1531 priv->msg_enable = netif_msg_init(debug.msg_enable,
1532 ENC28J60_MSG_DEFAULT);
1533 mutex_init(&priv->lock);
1534 INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1535 INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1536 INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1537 INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1538 dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
1539 SET_NETDEV_DEV(dev, &spi->dev);
1540
1541 if (!enc28j60_chipset_init(dev)) {
1542 if (netif_msg_probe(priv))
1543 dev_info(&spi->dev, DRV_NAME " chip not found\n");
1544 ret = -EIO;
1545 goto error_irq;
1546 }
1547 random_ether_addr(dev->dev_addr);
1548 enc28j60_set_hw_macaddr(dev);
1549
David Brownellc7b7b042008-07-24 17:47:56 -07001550 /* Board setup must set the relevant edge trigger type;
1551 * level triggers won't currently work.
1552 */
1553 ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001554 if (ret < 0) {
1555 if (netif_msg_probe(priv))
1556 dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1557 "(ret = %d)\n", spi->irq, ret);
1558 goto error_irq;
1559 }
1560
1561 dev->if_port = IF_PORT_10BASET;
1562 dev->irq = spi->irq;
1563 dev->open = enc28j60_net_open;
1564 dev->stop = enc28j60_net_close;
1565 dev->hard_start_xmit = enc28j60_send_packet;
1566 dev->set_multicast_list = &enc28j60_set_multicast_list;
1567 dev->set_mac_address = enc28j60_set_mac_address;
1568 dev->tx_timeout = &enc28j60_tx_timeout;
1569 dev->watchdog_timeo = TX_TIMEOUT;
1570 SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1571
David Brownell7dac6f82008-06-12 21:38:06 -07001572 enc28j60_lowpower(priv, true);
1573
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001574 ret = register_netdev(dev);
1575 if (ret) {
1576 if (netif_msg_probe(priv))
1577 dev_err(&spi->dev, "register netdev " DRV_NAME
1578 " failed (ret = %d)\n", ret);
1579 goto error_register;
1580 }
1581 dev_info(&dev->dev, DRV_NAME " driver registered\n");
1582
1583 return 0;
1584
1585error_register:
1586 free_irq(spi->irq, priv);
1587error_irq:
1588 free_netdev(dev);
1589error_alloc:
1590 return ret;
1591}
1592
David Brownell6fd65882008-06-12 21:36:24 -07001593static int __devexit enc28j60_remove(struct spi_device *spi)
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001594{
1595 struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1596
1597 if (netif_msg_drv(priv))
1598 printk(KERN_DEBUG DRV_NAME ": remove\n");
1599
1600 unregister_netdev(priv->netdev);
1601 free_irq(spi->irq, priv);
1602 free_netdev(priv->netdev);
1603
1604 return 0;
1605}
1606
1607static struct spi_driver enc28j60_driver = {
1608 .driver = {
1609 .name = DRV_NAME,
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001610 .owner = THIS_MODULE,
David Brownell6fd65882008-06-12 21:36:24 -07001611 },
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001612 .probe = enc28j60_probe,
1613 .remove = __devexit_p(enc28j60_remove),
1614};
1615
1616static int __init enc28j60_init(void)
1617{
David Brownell7dac6f82008-06-12 21:38:06 -07001618 msec20_to_jiffies = msecs_to_jiffies(20);
1619
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +01001620 return spi_register_driver(&enc28j60_driver);
1621}
1622
1623module_init(enc28j60_init);
1624
1625static void __exit enc28j60_exit(void)
1626{
1627 spi_unregister_driver(&enc28j60_driver);
1628}
1629
1630module_exit(enc28j60_exit);
1631
1632MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1633MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1634MODULE_LICENSE("GPL");
1635module_param_named(debug, debug.msg_enable, int, 0);
1636MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");