blob: bca25e8eab627bbe2a925fe82145f0c85dd8aa66 [file] [log] [blame]
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -03001/*
2 V4L2 sub-device support header.
3
4 Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
10
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
15
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef _V4L2_SUBDEV_H
22#define _V4L2_SUBDEV_H
23
24#include <media/v4l2-common.h>
25
26struct v4l2_device;
27struct v4l2_subdev;
28struct tuner_setup;
29
30/* Sub-devices are devices that are connected somehow to the main bridge
31 device. These devices are usually audio/video muxers/encoders/decoders or
32 sensors and webcam controllers.
33
34 Usually these devices are controlled through an i2c bus, but other busses
35 may also be used.
36
37 The v4l2_subdev struct provides a way of accessing these devices in a
38 generic manner. Most operations that these sub-devices support fall in
39 a few categories: core ops, audio ops, video ops and tuner ops.
40
41 More categories can be added if needed, although this should remain a
42 limited set (no more than approx. 8 categories).
43
44 Each category has its own set of ops that subdev drivers can implement.
45
46 A subdev driver can leave the pointer to the category ops NULL if
47 it does not implement them (e.g. an audio subdev will generally not
48 implement the video category ops). The exception is the core category:
49 this must always be present.
50
51 These ops are all used internally so it is no problem to change, remove
52 or add ops or move ops from one to another category. Currently these
53 ops are based on the original ioctls, but since ops are not limited to
54 one argument there is room for improvement here once all i2c subdev
55 drivers are converted to use these ops.
56 */
57
58/* Core ops: it is highly recommended to implement at least these ops:
59
60 g_chip_ident
61 log_status
62 g_register
63 s_register
64
65 This provides basic debugging support.
66
67 The ioctl ops is meant for generic ioctl-like commands. Depending on
68 the use-case it might be better to use subdev-specific ops (currently
69 not yet implemented) since ops provide proper type-checking.
70 */
71struct v4l2_subdev_core_ops {
72 int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip);
73 int (*log_status)(struct v4l2_subdev *sd);
74 int (*init)(struct v4l2_subdev *sd, u32 val);
75 int (*s_standby)(struct v4l2_subdev *sd, u32 standby);
76 int (*reset)(struct v4l2_subdev *sd, u32 val);
77 int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
78 int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
79 int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
80 int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
81 int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
82 int (*ioctl)(struct v4l2_subdev *sd, int cmd, void *arg);
83#ifdef CONFIG_VIDEO_ADV_DEBUG
84 int (*g_register)(struct v4l2_subdev *sd, struct v4l2_register *reg);
85 int (*s_register)(struct v4l2_subdev *sd, struct v4l2_register *reg);
86#endif
87};
88
89struct v4l2_subdev_tuner_ops {
90 int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
91 int (*s_radio)(struct v4l2_subdev *sd);
92 int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
93 int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
94 int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
95 int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
96 int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
97 int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
98 int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
99};
100
101struct v4l2_subdev_audio_ops {
102 int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
103 int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
104 int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
105};
106
107struct v4l2_subdev_video_ops {
108 int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
109 int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq);
110 int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
111 int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
112 int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
Hans Verkuil1fe27402008-12-18 11:16:24 -0300113 int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
Hans Verkuil2a1fcdf2008-11-29 21:36:58 -0300114 int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
115 int (*s_stream)(struct v4l2_subdev *sd, int enable);
116 int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
117 int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
118};
119
120struct v4l2_subdev_ops {
121 const struct v4l2_subdev_core_ops *core;
122 const struct v4l2_subdev_tuner_ops *tuner;
123 const struct v4l2_subdev_audio_ops *audio;
124 const struct v4l2_subdev_video_ops *video;
125};
126
127#define V4L2_SUBDEV_NAME_SIZE 32
128
129/* Each instance of a subdev driver should create this struct, either
130 stand-alone or embedded in a larger struct.
131 */
132struct v4l2_subdev {
133 struct list_head list;
134 struct module *owner;
135 struct v4l2_device *dev;
136 const struct v4l2_subdev_ops *ops;
137 /* name must be unique */
138 char name[V4L2_SUBDEV_NAME_SIZE];
139 /* can be used to group similar subdevs, value is driver-specific */
140 u32 grp_id;
141 /* pointer to private data */
142 void *priv;
143};
144
145static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
146{
147 sd->priv = p;
148}
149
150static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
151{
152 return sd->priv;
153}
154
155/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call.
156 This is used by subdev modules that can be called by both old-style ioctl
157 commands and through the v4l2_subdev_ops.
158
159 The ioctl API of the subdev driver can call this function to call the
160 right ops based on the ioctl cmd and arg.
161
162 Once all subdev drivers have been converted and all drivers no longer
163 use the ioctl interface, then this function can be removed.
164 */
165int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg);
166
167static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
168 const struct v4l2_subdev_ops *ops)
169{
170 INIT_LIST_HEAD(&sd->list);
171 /* ops->core MUST be set */
172 BUG_ON(!ops || !ops->core);
173 sd->ops = ops;
174 sd->dev = NULL;
175 sd->name[0] = '\0';
176 sd->grp_id = 0;
177 sd->priv = NULL;
178}
179
180/* Call an ops of a v4l2_subdev, doing the right checks against
181 NULL pointers.
182
183 Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
184 */
185#define v4l2_subdev_call(sd, o, f, args...) \
186 (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \
187 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
188
189#endif